Good day fellow Galaxy tab users! My problem is that when I connect my tab to a PC with the USB cord it does not do anything.It does not say click here to copy files from SD CARD to PC in notification bar.Just nothing. It happened when I upgraded my tab to build 35 of AOKP.pleasehelp. thanksss!
http://forum.xda-developers.com/showthread.php?t=1712481
I would suggest checking the settings (developer options) make sure USB debugging is unchecked, which seems to put the device into mass storage mode
Awology said:
I would suggest checking the settings (developer options) make sure USB debugging is unchecked, which seems to put the device into mass storage mode
Click to expand...
Click to collapse
i already tried that but.... nothing
I also had the same problem......
Try all USB ports u have on your PC
One of them will surely work as it worked for me....
If it works keep that USB port reserved for tab...do not use any dial up or something like that.....
Try it .....
Hit thanks if I've helped
Sent from my GT-P1000 using xda app-developers app
Related
This is the stupidest question ever I have to ask here, but how to copy files to the tablet from pc?
When I connect the usb to pc, the 'USB debugging connected' pops out on my galaxy and only this.
In my other bizzilion android devices it usualy also asks if I want to 'Turn on USB Storage', which is what I need.
Turn off usb debugging and everything is fine!
Sent from my GT-P1000 using XDA Premium App
even though if usb debugging is "on" u can mount it by the pull down and select copy files , if you wanna use kies and even though in debugging mode you can use your kies , but go to settings\app\dev and un-check debugging mode ,
settings\wireless and networks\USB go check there and click on ask me
Hi all,
Just flashed CM9 on my Touchpad and am wondering if I'm missing a USB driver or something. When I was on WebOS I could connect the TP to my PC and select the option to turn on Mass Storage with no issues. After flashing when I connect the TP Win 7 tries to install a driver but fails to do so.
What am I missing? I can connect my Galaxy Nexus to the PC with no issues so I'm at a loss.
in storage under advanced theres a setting to connect with usb.mine works.win 7 still said failed to install driver but it still works
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Bingo. That was it.
Thanks guys!
(Isn't it odd that neither MTP or PTP is checked by default?)
Edit: Looks like I spoke too soon. When connected via PTP the computer recognizes the connection but for some reason won't let me copy/paste anything to the SD Card. When I try to connect via MTP the PC just says its a "USB composite device" so I can't access the volume. Grrrr.
Windows XP and MTP Problem
I had problems trying to connect to windows XP via the MTP interface but the driver kept failing to install.
I checked the MTP box and tried switching between MTP and PTP but with no joy.
I then switched off the USB debugging in Developer options reconnected and XP installed the driver fist time and all is working well.
Thanks for the help!!! Keep up the good work.
BAM! Worked like a charm!
I was getting a little frustrated. You guys are lifesavers.
dan-fish said:
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Click to expand...
Click to collapse
desiretouchpad said:
in storage under advanced theres a setting to connect with usb.mine works.win 7 still said failed to install driver but it still works
Click to expand...
Click to collapse
dan-fish said:
Yeah go to storage, select the three dots on the right hand corner and press USB computer connection. Then select MTP. I had to switch mine between MTP and PTP a couple of times before windows 7 installed the driver properly.
Click to expand...
Click to collapse
thanks guys. got the same problems with OP. now it solved. again, thanks to u 2.
dont know if this helps anybody but i dont use usb in ICS its just...bad^^
its slower (at least it feels so) some controlls are missing...
so i mostly use cwm for usb transfer, works like a charm^^
Wow Thank you so much guys!
wow, worked like a charm.
codehunter13 said:
dont know if this helps anybody but i dont use usb in ICS its just...bad^^
its slower (at least it feels so) some controlls are missing...
so i mostly use cwm for usb transfer, works like a charm^^
Click to expand...
Click to collapse
I agree. Even if you get the USB connection to work in CM9, there is a file size limitation on transfers. I don't recall exactly what the size is but I know I had trouble with a "nightly" image I was tryubf to install. Now I either use CWM or transfer via a wireless FTP app. "WiFi File Transfer" from the Play Store.
Wifi is a little slower but you don't have to bother connecting the cable and setting everything up. Once you set up WiFi FT the first time, it just takes a couple of clicks to connect and start a file transfer.
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------
normalife said:
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
Click to expand...
Click to collapse
While I plug in yhe usb cablr, its shows a charging sign on my tablet..but doesnt show up the usb connection
normalife said:
I already turn on the MTP and trying to check/uncheck the usb debugging but still doesnt work..
I also switched to WEBOS by my win7 still cant recognize it: (..
Can anybody help????
---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------
While I plug in yhe usb cablr, its shows a charging sign on my tablet..but doesnt show up the usb connection
Click to expand...
Click to collapse
You haven't installed drivers or you have a bad cable
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
You haven't installed drivers or you have a bad cable
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
I think its the driver problem..
But I think its already install before I flash it into android..isnt it??
And um...I forgot the touchpad pc software's name..any hints?
Thanks.
normalife said:
I think its the driver problem..
But I think its already install before I flash it into android..isnt it??
And um...I forgot the touchpad pc software's name..any hints?
Thanks.
Click to expand...
Click to collapse
Yeah but all you have to do is go to your Device Manager and update the driver from there
Sent from my cm_tenderloin using Tapatalk 2
make sure you uncheck the usb debugging mode in the developer settings
worked for me like a charm
colin_zz said:
I had problems trying to connect to windows XP via the MTP interface but the driver kept failing to install.
I checked the MTP box and tried switching between MTP and PTP but with no joy.
I then switched off the USB debugging in Developer options reconnected and XP installed the driver fist time and all is working well.
Click to expand...
Click to collapse
Good job! Thanks.
I've having a problem with my PC not picking up my phone when plugged up. It will charge, but that's it. I don't get the drop down box to select my connection mode. Here's my setup:
Android version 2.3.4
Gingervolt 2.0
SW version: VS910ZV7
Debug enabled
Default connection mode is internet connection
Connected straight to USB port (no hub involved)
I've tried taking the battery out for a few minutes and that didn't work. I've tried toggling the default connection mode, but that does nothing.
I'd like to upgrade my CWM, but can't because of this.
Any ideas?
***EDIT***
Well for some odd/unknown reason my USB connection is working again! I have done nothing to my phone since flashing Break Out ROM 1.1 a while back and the USB was still broken after that. So, while this makes absolutely no sense at all, I'm thrilled to have it back!
Click to expand...
Click to collapse
brad6360 said:
I've having a problem with my PC not picking up my phone when plugged up. It will charge, but that's it. I don't get the drop down box to select my connection mode. Here's my setup:
Android version 2.3.4
Gingervolt 2.0
SW version: VS910ZV7
Debug enabled
Default connection mode is internet connection
Connected straight to USB port (no hub involved)
I've tried taking the battery out for a few minutes and that didn't work. I've tried toggling the default connection mode, but that does nothing.
I'd like to upgrade my CWM, but can't because of this.
Any ideas?
Click to expand...
Click to collapse
If you want drop down box to select connection mode then go to settings/connectivity and check always ask (if its not already checked) i dont think the computer will show its connected unless mass storage is selected and your sd cards show up on computer. When in internet mode its probably fine just run the program to install cwm recovery. Thats what i did to make sure computer was reading the phone. Someone else may have better input on the subject
Sent from my VS910 4G using xda premium
I've had problems before when not using the original LG cord. Are you using something other than that?
"always ask" is checked, but it never asks when I plug it up to my PC. If I switch default connection mode to mass storage my PC doesn't pick up my SD card either. So mass storage nor internet connection mode works. It will however, at least charge.
Yes, I'm using an original LG usb cable.
Have you verified the SD Card actually works by going into a File Manager and seeing if you can read the files in your SD Card?
Yes the SD card works. I can browse the files on it with Root Explorer and CWM picks up the backup images on it.
brad6360 said:
Yes the SD card works. I can browse the files on it with Root Explorer and CWM picks up the backup images on it.
Click to expand...
Click to collapse
Have you only tried 1 port on the PC or multiple? If you can, try a different port or a different PC.
Sent from my AXI0M ICS RAZR using tapatalk.
spc_hicks09 said:
Have you only tried 1 port on the PC or multiple? If you can, try a different port or a different PC.
Sent from my AXI0M ICS RAZR using tapatalk.
Click to expand...
Click to collapse
I should have included that in my original post. I have tried every USB port on 3 different PC's. Two HP's and one Dell.
Any other suggestions? I've been searching the net for days now and can't find a solution. I'm beginning to think I have a hardware problem. Is there any chance this could be a software/configuration problem?
When conecting my Note to a Winows PC via USB, on some computers I get 2 Removable Disks (i.e. E: & F, and in which to enable these drives to be viewed, I have to go to the alert screen on my Note and select enable USB.
Other times when connecting the Note to a PC, I get a Samsung Note listed un My Computer, and in that case I can just click on it and it will allow me to view contents of Note without having to enable it via the phone.
Any idea why this is?
Thanks
do you have usb debugging enabled?
The first Option called Mass Storage (Faster file transfer)
And the second one called MTP (Media Transfer Protocol).
Richy99 said:
do you have usb debugging enabled?
Click to expand...
Click to collapse
ranjan.alva said:
The first Option called Mass Storage (Faster file transfer)
And the second one called MTP (Media Transfer Protocol).
Click to expand...
Click to collapse
Aha...
When I have USB Debgging on I get the the Mass Storage (phone shows up as removable disk) and when I have USB Debugging off I get the MTP (phone shows as GT-N7000)....
Thanks to you both!
Was searching for the same..glad you have posted...thanks guys!!!
Sent from my GT-N7000 using xda premium
Advantage of MTP is, while trying to copy some media files it ll ask you to "convert and copy". so that Note can play that media file.
To add to it!! MTP mode is slower than usb mode and while on MTP mode u can access the card on phone and computer simultaneously!!
SHOT from my LOADED GT-N7000!!
This is not the case for me
I have USB Debgging enabled, since I use adb for some stuff, however, usb will always be in MTP mode!
i disabled USB Debgging and tried it then enabled it again but it is always in MTP.
does anyone know why?
i am using rooted stock rom.
fduraibi said:
This is not the case for me
I have USB Debgging enabled, since I use adb for some stuff, however, usb will always be in MTP mode!
i disabled USB Debgging and tried it then enabled it again but it is always in MTP.
does anyone know why?
i am using rooted stock rom.
Click to expand...
Click to collapse
Bub,
Before you connect the cable open settings> wireless and network > usb utility > connect usb storage then it will ask you to connect the cable. Connect the cable and it should mount the phone as usb storage...
Hit thanks if it helped
Peave out!!
SHOT from my LOADED GT-N7000!!
geo.samuel said:
Bub,
Before you connect the cable open settings> wireless and network > usb utility > connect usb storage then it will ask you to connect the cable. Connect the cable and it should mount the phone as usb storage...
Hit thanks if it helped
Peave out!!
SHOT from my LOADED GT-N7000!!
Click to expand...
Click to collapse
"wireless and network" OMG, i remember seeing the usb setting somewhere then i looked all over but of course not inside "wireless and network" !! why here, should be under storage or something more related...
anyway, thanks for the help
I think i have similar problem here. The only thing is that i could not connect to Samsung Kies. When I try to troubleshot it, connection error occurs.
What would I possibly do about it?
My Droid3 won't connect to USB.
When I connect my Droid 3 to computer,The phone has no response(nothing in status bar) and in the computer's Device Manager,
there are many unkonwn devices:
Diag Interface
Modem Interface
MUX Interface
NMEA Interface
TCMD Interface
After search on Internet,I think I may turn the phone into Diag Mode ,
but how to disable diag mode?
and there is other problems?
Anyone can help me? thank you!
Have you tried to disable/enable USB debugging in settings?
yukinok25 said:
Have you tried to disable/enable USB debugging in settings?
Click to expand...
Click to collapse
When I Switch USB Debug(turn on or turn off) when USB is connected, the staus bar will show USB option(PC mode,USB mass storge,charge,etc..)
But no matter what I choose,It does't work.
And when I run adb command(usb debug on) , It shows "device not found".
yukinok25 said:
Have you tried to disable/enable USB debugging in settings?
Click to expand...
Click to collapse
Install the drivers from the SBF thread.
MrObvious said:
Install the drivers from the SBF thread.
Click to expand...
Click to collapse
What driver??
I have installed Motorola_End_User_Driver_Installation_5.7.0
Change ports and/or USB cable
Sent from my XT860 using xda app-developers app
AragornPE said:
Change ports and/or USB cable
Sent from my XT860 using xda app-developers app
Click to expand...
Click to collapse
I had changed ports ,and USB cable
And windows xp and win 8.
But It's the same.
are you using the stock usb cable?
are you running a rom?
what recovery are you using?
if you have a custom recovery hook your phone up to your computer and boot your phone into recovery either cwm or safestrap
go to mounts and storage and try to mount sdcard and see if that works
p.s
make sure usb debugging is enabled and check mass storage in the drop down
Was there ever a solution found? My droid 3 for some reason the usb debugging isn't working, the computer sees it and I can access my files, but debugging won't enable. I turned it on and off in settings a bunch of times and tryed a few different drivers