Hello. Imma noob here.
Now my question is.. how to enable a2sd on GDX?
Sent from my E15i using xda premium.
What's my phone status?
Bootloader : Unlocked
Android : 2.3.7
Baseband : ~015
Kernel : Alfs v08a
ROM : GingerDX
Build : v028b
If i understood what you ask is this
if you want to move each application separately : settings-applications-manage app and press the app you want and choose phone or card
if you want all apps that you install : settings-cmodsettings-application-tick on allow app.. and choose install location
hope i help!:fingers-crossed:
You need to go to cm settings, application , install location and select sd card. Or you can just move the apps
Sent from my X8 using XDA
Related
Hello,
I use gingerDX v13 on my X8 phone.
When i reboot, i now have allways the choise for rebooting, xrecovery and clockworkmod.
I was using xrevovery before, and i don't know if it's better to stick with it, or that i should use clockworkmod.
I did some reading, but didn't found any straight comparision...
What is your opinions?
tx!
They're both important. To install gingerdx v013 and below, u can only use xrecovery. Bt starting from v14 and above, daioxanh says u need to use clockwork mod
Sent from my X8 running on GingerDX via XDA APP
both Xrecovery and clockwork mod have different update script,thats just what i know..
You need em both, and for things like full wipe or cache wipe there's no difference in which one u use...
Sent from my X8 using XDA App
Hi guys, can you show your step to upgrade x8?
Because I don't know whether my step is correct or not.
Thanks guys!
My step as following...
1.Root
2.install busybox
3.install xrecovery
4.unlock bootloader
-check with s1tools
-run msm7227_semc.cmd with debugging
5.flash kernel with flash tools
6.flash GingerDX v013
7.flash GingerDX v025
any miss step?
Dude i think superoneclick will install busy box by itself and if you unlock your bootloader after root and flash new kernel then you don't need to install x recovery just flash the rom.
Press thanks if i helped
Sent from my Worlds using xda premium
The steps are good that way, but you can do the following :
Instaid of intalling x recovery..bla bla and gdx v13 and then v25, you can install cwm ..bla bla...and there is no need for v13 you can just Install v25
Sent from my X8 using xda premium
Slackception!!!
1. Download Flashtool
2. Download Firmware files and place it to prepare to flash
3. Download GingerDX and PLACE IT ON SD CARD.
4. Open FlashTool, select Advanced > Root > Force PSNeuter
5. Follow Instructions
6. Reboot Rooted phone.
7. Check if your phone is eligible for BL Unlock (DATE CODE)
8. Select Plugins > Unlock Bootloader in Flashtool
9. Follow Instructions
10. Reboot Phone, and flash kernel
11. Enter directly into CWM on the kernel.
12. Open the update zip in CWM
13. Rem to wipe all data
-- Skip Install BusyBox, Xrecovery, and only need one tool: FLASHTOOL!!!
http://androxyde.github.com/Flashtool/
THANKS buddy!!!!
_Learner_ said:
Hi guys, can you show your step to upgrade x8?
Because I don't know whether my step is correct or not.
Thanks guys!
My step as following...
1.Root
2.install busybox
3.install xrecovery
4.unlock bootloader
-check with s1tools
-run msm7227_semc.cmd with debugging
5.flash kernel with flash tools
6.flash GingerDX v013
7.flash GingerDX v025
any miss step?
Click to expand...
Click to collapse
Facepalm ? Elaborate for new people that tiny **** wont help them.
Sent from my X8 running nAa and D_d piece of art called MiniCM9.
stamatis16 said:
The steps are good that way, but you can do the following :
Instaid of intalling x recovery..bla bla and gdx v13 and then v25, you can install cwm ..bla bla...and there is no need for v13 you can just Install v25
Sent from my X8 using xda premium
Click to expand...
Click to collapse
how to install cwm? if i install gingerdx v25 via xrecovery, my x8 will brick... so i need to install gingerdx v13 which will install cwm automatically, then i can install gingerdx v25 via cwm...
_Learner_ said:
how to install cwm? if i install gingerdx v25 via xrecovery, my x8 will brick... so i need to install gingerdx v13 which will install cwm automatically, then i can install gingerdx v25 via cwm...
Click to expand...
Click to collapse
Install it with x8toolbox its very easy
http://forum.xda-developers.com/showthread.php?t=1117100
Sent from my X8 using xda premium
Friend
CosminAdriaan said:
Facepalm ? Elaborate for new people that tiny **** wont help them.
Sent from my X8 running nAa and D_d piece of art called MiniCM9.
Click to expand...
Click to collapse
So, can u elaborate for us? im a beginner... thanks!
stamatis16 said:
Install it with x8toolbox its very easy
Sent from my X8 using xda premium
Click to expand...
Click to collapse
what is x8toolbox? it's a new term for me...
_Learner_ said:
what is x8toolbox? it's a new term for me...
Click to expand...
Click to collapse
I have gave you link
http://forum.xda-developers.com/showthread.php?t=1117100
Sent from my X8 using xda premium
Look...
I DO NOT troll people with talk of MiniCM9.
Especially not a beginner.
I do use MiniCM9 as my primary rom, but choices are choices and if one wants help on how to peel apples, don't give help on how to peel oranges.
yusiang1998 said:
Look...
I DO NOT troll people with talk of MiniCM9.
Especially not a beginner.
I do use MiniCM9 as my primary rom, but choices are choices and if one wants help on how to peel apples, don't give help on how to peel oranges.
Click to expand...
Click to collapse
I don't get what you are trying to say...why are you refering to minicm9? And why did you revive that?
are you drunk bro?
Sent from my X8 using xda premium
First of all, go to Settings > info and check if your baseband ends with 015. If not, update with PC Companion.
Sent from my X8 using XDA
_Learner_ said:
how to install cwm? if i install gingerdx v25 via xrecovery, my x8 will brick... so i need to install gingerdx v13 which will install cwm automatically, then i can install gingerdx v25 via cwm...
Click to expand...
Click to collapse
Well I have successfully installed PrimeHD v8 , GingerDx v25 and GingerDx v26 using xRecovery. I never got any bricks.
_Learner_ said:
what is x8toolbox? it's a new term for me...
Click to expand...
Click to collapse
It's a adb type software which you have to install on your computer.
Using this you can root , flash CWM/xRecovery etc on your X8 just by connecting it with your PC.
Follow this link --> http://forum.xda-developers.com/showthread.php?t=1117100
Why install ver 13 and 25? Just install ver 26 and alfs GDX kernel and ur good to go
Do you read any post before you post?....facepalm
I don't think he has any problem now, as long as he didn't tell us anything more.....
Sent from my X8 using xda premium
EDIT: Found an answer elsewhere. Sorry again.
New guy here
Sorry for reviving this but would I be ok if I upgraded from v19 to v026 without any further steps. Or would a clean install be better?
I put gingerdx v29 on my x8
i have SUPERSU and super user (super user i downloaded from market)
problem is when i try to start overclock! vidget it say "you must have a rooted phone!"
ok. i try to root it with x8toolbox and it say root not applicable to custom rom
how to root my phone with gingerdx v29 on it...
root checker (from market) also say that phone isn't rooted :S
FIXED... -.-"
it was turned of in supersu ://
I need help with overclocking... please put me links, i found on forum but there is so much version about instalation and evertying
tell me what i need and hot to do...
thema3x99 said:
I put gingerdx v29 on my x8
i have SUPERSU and super user (super user i downloaded from market)
problem is when i try to start overclock! vidget it say "you must have a rooted phone!"
ok. i try to root it with x8toolbox and it say root not applicable to custom rom
how to root my phone with gingerdx v29 on it...
root checker (from market) also say that phone isn't rooted :S
Click to expand...
Click to collapse
try fresh install then use the flashable superuser zip in the thread it will work
are you already unlock bootloader or your using stuck?
and hope your x8 can unlock bootloader.
Sent from my X8 using xda premium
Re-install GDX.
Then flash the superuser zip from the rom thread through CWM.
I don't suggest overclock,if you want big difference in performance you better buy a new phone...but if you want it that much, try it
Sent from my X8 using xda premium
Doesn't every custom rom has been rooted??? Why'd u try to root it if that rom has been rooted?? 'a
Maybe this one can solve ur problem, try to use english (u.s) @ language setting, 'coz i have same problem before, i tried to change language into indonesia and su got fc...
Sent from my X8 using xda app-developers app
hi .
i am using stock with xrecovery .
can i install gingerdx v 29 using xrecovery ???
if not , how can i install the cwm ?????
tnq all .
torpedo mohammadi said:
hi .
i am using stock with xrecovery .
can i install gingerdx v 29 using xrecovery ???
if not , how can i install the cwm ?????
tnq all .
Click to expand...
Click to collapse
There is a flashable zip of CWM,
Search & install
see my app sig at your own risk :
sent from my W8 running on armv7 processor problem??
Download x8 toolbox it can install cwm recovery and its very easy to use check the original development section for download
sent from my w8
press thanks if I helped you
yes x8 toolbox is best
I Recently unlocked bootloader & flashed SDE which worked fine...
Then I flashed nAa-14 2.6.29.6 & flashed ixperia latest version with correct procedure but I can't get past kernel logo why is this problem occurring? I tried 2 times & same
Sent from my E15i using xda app-developers app
Full wipe?
Redownload rom
reflash kernel
Copy-paste from op
INSTALLATION STEPS :
To a2sd users that wish to use Alfs kernel with this rom. It is recommended to format your sdext first using minipartitiontool or etc before flashing this rom. Thanks ( Optional )
1. Download the rom and patch using FLASHGET 3.7 or XUNLEI are highly recommended from the downloads section at top of changelog
2. Reflash latest nAa/alfs kernel using latest flashtool is recommended ( Old version flashtool have kernel detection bugs )
3. Enter CWM
4. Enter mount and storage
5. Select format system then format ext and press back button
6. Select full wipe
7. Select wipe cache
8. Enter advanced
9. Select wipe dalvik cache
10. Select wipe battery stat
11. Now search for the rom and patch then flash them.
12. Reboot your phone
13. Enjoy !!
Click to expand...
Click to collapse
If you followed every step and nothing helps then try an older version and see if it is booting
Recovery says it installed correctly see log here
Should I try another version of kernel
Sent from my E15i using xda app-developers app
try alfs kernel
After flashing SDE via Flashtool, it applies a custom SDE version of nAa 14 which doesn't work properly with any other ROM. So after you're going on another ROM, flash stock 2.1 firmware and then nAa 14. You don't need root in order to flash nAa 14 from fresh 2.1
Sent from my Nexus 10 using Tapatalk HD
Mistev said:
After flashing SDE via Flashtool, it applies a custom SDE version of nAa 14 which doesn't work properly with any other ROM. So after you're going on another ROM, flash stock 2.1 firmware and then nAa 14. You don't need root in order to flash nAa 14 from fresh 2.1
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
I know dude
I flashed fresh nAa 14 for ixperia..
Now I found that the problem was in rom
Sent from my X8 using xda app-developers app
Try using alfs kernel, it also happen to me when i try to flash jelly blur v3.3 using naa 04 and then i use naa 05 kernel and works amazingly....
Sent from my E15i using xda app-developers app
So I flashed this rom successfully but I'm having 2 problems
1. Mx player don't play videos correctly ...
2. No lockscreen(I haven't changed in status bar tweaks)
Sent from my iXperiA 8s using xda app-developers app