[resolved] Req: recommendations for a belt pouch - Motorola Droid 4

Went with this vertical pouch by BestCellBuy
--------------------------------------------------
Looking for a belt pouch that has the following criteria:
1. Clip mounted high enough along the pouch so the phone doesn't flip out
2. Clip strong enough to retain its clipping ability instead of it staying expanded after the pouch has been removed from the belt.
3. Pouch cover flap magnet powerful enough to remain shut if the pouch fell off the belt-- or a snap would work too.

Related

Looking for a thin and light case

I'm looking for a case with the following properties but can't see to find one:
1.) Folio style - i.e. Something like the Blurex or Incipio Leather case. MUST be lightweight enough and minimize bulk so that it can still fit in a pants front pocket.
2.) Glass on front is totally unobscured. Blurex or Incipio has this as well.
3.) An elastic band attached not to the cover half, but rather to the half to which the tablet is secured. This way, the elastic band can be used to keep the cover secured when not in use, and can ALSO be used to keep the cover folded back when in use. The Blurex and Incipio can't do the latter because the elastic band is attached to the cover itself. When closed, it wraps around the back to keep it secure, but can't be used to secure the cover when open because it would cover the screen.
4.) Auto wake/sleep magnet.
5.) Some kind of stand mechanism would be nice, but is not essential.
Does anything out there fit the bill?
How about the MoKo case? [Amazon]
xtacy! said:
How about the MoKo case? [Amazon]
Click to expand...
Click to collapse
Looks just like the Blurex case. Nice, but the elastic band is on the wrong side. If you want to use it to keep the cover open you either cover part of the screen or loop it awkwardly around the clasp to avoid covering the screen.
I have a marware kindle touch case that has the elastic band attached to the other side (the same side that holds the device). You wrap it over the front to keep it closed and wrap it over the back to keep it open. Very simple. Frustrating that I can't find a nexus 7 case with the same mechanism.

OB P970 Protective Case Review 1: Shellster Cover/Holster Combo

Shellster Horizontal Ribbed Design - Cover/Holster Combo:
----------
Available from Amazon.com (search words: LG 855 Shellster Black Belt Clip Holster)
Price: About $3.50 US ($3.50 + Free Shipping)
Materials: Hard black plastic cover and holster w/clip
Pros:
Compact
Great fit
Price
All-in-one solution
Cons:
Poor case retention in holster
No shock-absorption by case
No other color options
Belt clip only fits belts to 1-5/8" (4.1 cm)
Boxed-edges on case and holster
The "Shellster" case was my first LG P970 phone case. The price was right from Amazon (under $4, including shipping) and the on-line reviews were mostly favorable. I was impressed with the compactness of the combo, and the overall fit on the phone. I don't think the cover and holster could be made any thinner than this combo. The case sides wrap up and around the phone's sides, and sit just above the glass face surface; this case does not interfere with the on-screen keyboard in any way. The cover doesn't look like it's held on the phone by much, but it grips the phone well. My only real complaint is that the back of the cover is "boxy", with squared edges; the P970 has a beautifully rounded back that fits the hand well, and the squared edges of the cover feel out of place and make the phone appear larger than it actually is.
The holster is precision-molded and holds the phone cover face-inward. Three clips -- two on each side and one on the bottom -- hold the cover snugly in and against the holster. There is a shallow perimeter lip on the holster that helps position the cover; it also (somewhat) prevents the phone/cover from sliding up and out of the holster. A large felt pad lines the inside of the holster and protects the phone's face. A mulch-position clip securely locks the holster on a belt up to 1-5/8" (4.1 cm). The holster also has a "kickstand" built into its clip; pulling out on the clip and slipping an attached wire loop downward locks the clip outward. The stand seems to work fairly well, but I question its long-term durability.
In use, the holster didn't perform well. I immediately ran into problems with keeping the phone/cover in the holster while carrying it on my hip/small-of-back; all was well until I sat down. Sandwiched between my back and a chair/seat backrest, the phone had a tendency to work its way up and out of the holster in vertical carry. The three or four times the phone slipped out, I was able to quickly recover it. The Otterbox for the iPhone has a release latch on its holster; it's a feature that this holster sorely lacks. The holster has a raised ridge at its top to help retain the phone/case, but it's just not enough. I also ran into an issue with the belt clip: 1-5/8" clearance wasn't enough for my 1-3/4" work belt; the clip slipped over my belt, but wouldn't lock.
Rating, in three parts:
Cover - 3/5 - holds phone the well, but feels boxy in the hand, making the phone feel larger than it really is.
Holster - 1/5 - nicely built, but cover/phone retention is poor.
Overall - 2/5 - An inexpensive combo that's limited by both the lack of a retention latch and a non-contoured cover.

Seidio Spring-Clip Holster for Non-Cased (Naked) Droid Turbo

Seidio has released a Naked Belt Clip Holster for the Turbo.
Can be ordered from Amazon for $28.35
This holster is designed exclusively for a "naked" device
Seidio's Spring Clip Holster has been refined from years of customer feedback and advances in technology. A durable spring clip holds your device securely in place, and then lifts for quick access. Both the felt liner and the face-in design protect your screen from scratches and exposure to outside elements. This holster can be worn in any one of seven different positions, ranging between horizontal and vertical.
- Spring clip lifts for easy access and removal
- Felt liner and face-in design protect the screen
- Rotating swivel belt-clip with choice of seven positions
- For use with bare device
I have ordered one and will be here on Sat. Never found a naked belt clip for my last 2 Motorola's. I am glad Seidio took the plunge in developing one.
Will report after I receive it.
Awesome, I might pick one up.
Here is the actual link to the clip on Amazon
Received the Seidio Naked Holster today.
The fit is very good and it does not wiggle at all while locked into the holster. The Turbo pops in and out easily without any trouble.
Unlike the Shell Holster combo from Verizon, the Turbo pop in face forward from the side. The sliding down from the top with the Verizon holster always seems to catch my shirt in the holster.
Now I can loose the bulk and carry the Turbo without any case/shell like it was meant to be. Showing off the Ballistic Nylon back!

Review: roocase Exec Tough for Galaxy Note5

I used the roocase Exec Tough for my Note 5 for a week before writing this review. The current case I use is an OtterBox Commuter, which has been installed for about 2 months. This brief review will compare/contrast the roocase to the OtterBox.
roocase basics:
- Was sent a production version (not a beta) of the new Exec Tough Slim Fit Armor case for the Note5 to review
- Made from a co-molded TPU/polycarbonate process which combines a shock absorbent rubber inner lining with a hard but flexible outer case into a single cover that snaps onto the phone as one piece
- Case was all black except for the volume and power buttons, which are covered by a raised metal-looking plastic buttons that protect them from dust while making it easy to feel for the buttons with your fingers (more on that below)
- Other colors for the case are available - check the roocase website
- Case was surprisingly thin but strong
- Pictures below
roocase vs. OtterBox comparisons:
- roocase was thinner and lighter; felt easier to hold in my hand than the OtterBox
- roocase was not as bulky in my front pants pocket as the OtterBox
- roocase volume and power button cover keys were easy to locate and press; OtterBox key covers require a much firmer push to engage the buttons by comparison as they are covered by a raised rubber area
- roocase has a nice raised bumper on each case corner, clearly intended to fend off issues from drops (see pic below); OtterBox has no raised corners but has rubber around each corner as part of the OtterBox inner liner piece
- roocase was much easier to install on the phone versus the 2-part install process and alignment / press-fit of the OtterBox; however, roocase was very snug once on the phone once installed, and some strong pressure is needed to remove the roocase - it does not come off easily (probably a good thing)
- roocase does not have any rubber flaps covering the micro-usb or headset jack ports, like the OtterBox does
- Was much easier to get at & remove the S-Pen with the roocase on than with the OtterBox - the OtterBox has a slot in the rubber inner liner at the bottom right of the phone case, which while protecting that corner against drops, makes it a little harder to reach in and pop-out the stylus than the roocase's TPU co-mold design. Those with skinny fingers may not have such issues with the OtterBox installed but I do.
- OtterBox when installed has a higher case lip around the screen that makes you slow down and focus more when using a full finger swipe in from the far left edge of the screen; the roocase does not have as high a lip around the screen, and made this finger gesture easier to be recognized
Other general comparisons:
- Both cases offered clear access to the speaker & mic ports at the bottom and mic port at the top of the phone - no issues
- Both cases offered clear access around the camera and flash on the back of the phone - no issues
- Both cases offered clear access to the micro-usb and headset jacks (other than the OtterBox has rubber flaps covering these which must be first pushed out of the way). I had no issues hooking up my USB cables or Bose & Samsung headset cords to the phone with the cases installed.
Drop test notes:
- I have dropped my phone before with the OtterBox case on it (3' drop), and it landed on the bottom right corner, ejecting the S-pen onto the floor but no damage at all to the phone, case, or S-pen
- I did not drop the phone during the week I had the roocase installed, so I cannot comment on how it protects the phone, but just looking at its design and appearance of case features, it should protect just as well as the OtterBox
In conclusion:
- The roocase was more to my liking than the OtterBox, thanks to the fact that it was seemingly just as strong/durable, but also easier to install on the phone, had less weight/bulk, and it was easier to get at the S-pen/USB/Headset jack locations
- I have not decided which case I will use going forward as my ONLY hesitation with the roocase is that I find the phone screen turns on much too easily in my pocket due to the fact that only the lightest touch is required on the silver roocase button covers to activate the phone. I will use each case for another week, switching between them, until I can decide. Leaning towards the roocase though - just being honest.
These are just my opinions - you have yours. Will reply to thoughtful questions but will ignore any attacks or criticism of my opinion.
jaxf250 said:
I used the roocase Exec Tough for my Note 5 for a week before writing this review. The current case I use is an OtterBox Commuter, which has been installed for about 2 months. This brief review will compare/contrast the roocase to the OtterBox.
roocase basics:
- Was sent a production version (not a beta) of the new Exec Tough Slim Fit Armor case for the Note5 to review
- Made from a co-molded TPU/polycarbonate process which combines a shock absorbent rubber inner lining with a hard but flexible outer case into a single cover that snaps onto the phone as one piece
- Case was all black except for the volume and power buttons, which are covered by a raised metal-looking plastic buttons that protect them from dust while making it easy to feel for the buttons with your fingers (more on that below)
- Other colors for the case are available - check the roocase website
- Case was surprisingly thin but strong
- Pictures below
roocase vs. OtterBox comparisons:
- roocase was thinner and lighter; felt easier to hold in my hand than the OtterBox
- roocase was not as bulky in my front pants pocket as the OtterBox
- roocase volume and power button cover keys were easy to locate and press; OtterBox key covers require a much firmer push to engage the buttons by comparison as they are covered by a raised rubber area
- roocase has a nice raised bumper on each case corner, clearly intended to fend off issues from drops (see pic below); OtterBox has no raised corners but has rubber around each corner as part of the OtterBox inner liner piece
- roocase was much easier to install on the phone versus the 2-part install process and alignment / press-fit of the OtterBox; however, roocase was very snug once on the phone once installed, and some strong pressure is needed to remove the roocase - it does not come off easily (probably a good thing)
- roocase does not have any rubber flaps covering the micro-usb or headset jack ports, like the OtterBox does
- Was much easier to get at & remove the S-Pen with the roocase on than with the OtterBox - the OtterBox has a slot in the rubber inner liner at the bottom right of the phone case, which while protecting that corner against drops, makes it a little harder to reach in and pop-out the stylus than the roocase's TPU co-mold design. Those with skinny fingers may not have such issues with the OtterBox installed but I do.
- OtterBox when installed has a higher case lip around the screen that makes you slow down and focus more when using a full finger swipe in from the far left edge of the screen; the roocase does not have as high a lip around the screen, and made this finger gesture easier to be recognized
Other general comparisons:
- Both cases offered clear access to the speaker & mic ports at the bottom and mic port at the top of the phone - no issues
- Both cases offered clear access around the camera and flash on the back of the phone - no issues
- Both cases offered clear access to the micro-usb and headset jacks (other than the OtterBox has rubber flaps covering these which must be first pushed out of the way). I had no issues hooking up my USB cables or Bose & Samsung headset cords to the phone with the cases installed.
Drop test notes:
- I have dropped my phone before with the OtterBox case on it (3' drop), and it landed on the bottom right corner, ejecting the S-pen onto the floor but no damage at all to the phone, case, or S-pen
- I did not drop the phone during the week I had the roocase installed, so I cannot comment on how it protects the phone, but just looking at its design and appearance of case features, it should protect just as well as the OtterBox
In conclusion:
- The roocase was more to my liking than the OtterBox, thanks to the fact that it was seemingly just as strong/durable, but also easier to install on the phone, had less weight/bulk, and it was easier to get at the S-pen/USB/Headset jack locations
- I have not decided which case I will use going forward as my ONLY hesitation with the roocase is that I find the phone screen turns on much too easily in my pocket due to the fact that only the lightest touch is required on the silver roocase button covers to activate the phone. I will use each case for another week, switching between them, until I can decide. Leaning towards the roocase though - just being honest.
These are just my opinions - you have yours. Will reply to thoughtful questions but will ignore any attacks or criticism of my opinion.
Click to expand...
Click to collapse
Great review, thanks.
May I add, the otterbox cover for ports is a great advantage especially as a daily commuter, my pockets are filled with stuff.
This stuff caused me to loose my headphone jack because it was not connected on my work Iphone.
*the fact that it was an iphone didn't help *

iPulse Genuine Full Grain Leather Case Review

iPulse Journal Series Leather Wallet Case for the Galaxy Note 8
https://www.amazon.com/gp/product/B074Z5TMY9
This is the first wallet-type case I've used with the Note 8 and it seems have everything I would want in a leather wallet case. It's smooth good quality leather, no jagged edges, multiple inner pockets, and straight matching black stitches.
Most importantly, it has a strong magnetic clasp, which is one issue I have with the wallet cases Samsung usually offers. While leather wallet cases aren't designed for maximum drop protection, having a strong magnetic clasp will prevent the phone itself from hitting the pavement. There's a gratifying snap when you close the cover and the flap won't separate unless you pull it with force.
A plus in my book is that the phone is kept in place with a soft TPU case attached to the leather. Some manufacturers like Samsung choose to use a polycarbonate case-like portion to hold the phone in place but the bottom and top of the phone is usually exposed to the elements. I had no issues inserting and removing the Note 8 from the TPU portion and it holds the phone securely. Phone port cutouts are where they are supposed to be, but be advised that the TPU does not cover the power, Bixbie, or volume rocker, which means the already shallow buttons are more difficult to press.
The brand logo is out of the way and is on the bottom left of the backside. It has a clean design on the front with no lettering. One thing I would have liked to see is an earpiece opening on the front of the leather cover so I could talk on the phone with the cover closed, but flipping the cover behind the phone is not too much of a burden. This choice also gives the front cover a cleaner look, like a leather journal would have.
I would recommend this case if you're looking for a simple and clean-looking genuine leather wallet case for your Note 8.
Mine need to push the magnetic piece where it connected to your phone away from the phone, so it wont affect S-PEN
how about yours
Kawaisa said:
iPulse Journal Series Leather Wallet Case for the Galaxy Note 8
https://www.amazon.com/gp/product/B074Z5TMY9
This is the first wallet-type case I've used with the Note 8 and it seems have everything I would want in a leather wallet case. It's smooth good quality leather, no jagged edges, multiple inner pockets, and straight matching black stitches.
Most importantly, it has a strong magnetic clasp, which is one issue I have with the wallet cases Samsung usually offers. While leather wallet cases aren't designed for maximum drop protection, having a strong magnetic clasp will prevent the phone itself from hitting the pavement. There's a gratifying snap when you close the cover and the flap won't separate unless you pull it with force.
A plus in my book is that the phone is kept in place with a soft TPU case attached to the leather. Some manufacturers like Samsung choose to use a polycarbonate case-like portion to hold the phone in place but the bottom and top of the phone is usually exposed to the elements. I had no issues inserting and removing the Note 8 from the TPU portion and it holds the phone securely. Phone port cutouts are where they are supposed to be, but be advised that the TPU does not cover the power, Bixbie, or volume rocker, which means the already shallow buttons are more difficult to press.
The brand logo is out of the way and is on the bottom left of the backside. It has a clean design on the front with no lettering. One thing I would have liked to see is an earpiece opening on the front of the leather cover so I could talk on the phone with the cover closed, but flipping the cover behind the phone is not too much of a burden. This choice also gives the front cover a cleaner look, like a leather journal would have.
I would recommend this case if you're looking for a simple and clean-looking genuine leather wallet case for your Note 8.
Click to expand...
Click to collapse
Is the magnetism strong enough to keep the case closed?

Categories

Resources