i bumped into the known warning "Security Warning" in bootloader
it happend when i tried to install a rom.
BTW, im S-ON now 2..
P.E
i think i read that i need to flash zip with newer mainver.
here is all the information please help me if you can. ty
INFOversion: 0.5
INFOversion-bootloader: 2.01.0001
INFOversion-baseband: 3822.01.08.14_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.12.708.4
INFOserialno: ****
INFOimei: ******
INFOproduct: vivo
INFOplatform: HBOOT-7630
INFOmodelid: PG3213000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4208mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6ff7580f
INFOhbootpreupdate: 12
INFOgencheckpt: 0
margolis said:
i bumped into the known warning "Security Warning" in bootloader
it happend when i tried to install a rom.
P.E
i think i read that i need to flash zip with newer mainver.
here is all the information please help me if you can. ty
INFOversion: 0.5
INFOversion-bootloader: 2.01.0001
INFOversion-baseband: 3822.01.08.14_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.12.708.4
INFOserialno: ****
INFOimei: ******
INFOproduct: vivo
INFOplatform: HBOOT-7630
INFOmodelid: PG3213000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4208mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6ff7580f
INFOhbootpreupdate: 12
INFOgencheckpt: 0
Click to expand...
Click to collapse
From the looks of things, you at one time flashed or upgraded to the Sense 3.0/GB 2.3.5 because you have HBOOT 2.01.0001, but your mainver now show 2.12.708.4 which is a GB 2.3.3/Sense 2.1 ROM.
You can get rid of the security warning by flashing back to the Sense 3.0/GB 2.3.5 ROM.
can you please get me a link to a proper rom? cause:
1. the rom i have wont load..
2. other rom i tried wrote me about a problem with the costum ID
P.E
i forgot to say im S-ON now.. cause of the problem.. (edited in first msg too..)
margolis said:
can you please get me a link to a proper rom? cause:
1. the rom i have wont load..
2. other rom i tried wrote me about a problem with the costum ID
P.E
i forgot to say im S-ON now.. cause of the problem.. (edited in first msg too..)
Click to expand...
Click to collapse
Which 2 RUU/ROMs did you try?
It looks like you should be using this one:
http://www.filefactory.com/file/c0c...22U_3822.10.08.28_M_release_227715_signed.exe
should use the EXE or get the rom out from temp file and flash zip \ PG32IMG.zip ?
margolis said:
should use the EXE or get the rom out from temp file and flash zip \ PG32IMG.zip ?
Click to expand...
Click to collapse
I like to use the PG32IMG.zip personally. But either one should be fine.
tried that.. and got the message:
CID incorrect!!
Update Fail!
what should i do?
margolis said:
tried that.. and got the message:
CID incorrect!!
Update Fail!
what should i do?
Click to expand...
Click to collapse
Make a goldcard and try it again.
how do i do that.. and what does it do generally?
margolis said:
how do i do that.. and what does it do generally?
Click to expand...
Click to collapse
Search the forum. A goldcard is simply a sd card that has a signature file that will allow the phone to install a ROM that has a different CID than the one configured. That is what you need to get around the CID error.
ty, Created gold card using this guide->http://forum.xda-developers.com/showthread.php?t=1104226
checked if it worked as writting in the guide above.. passed the tests
and then i tried to flash it normaly using PG32IMG.zip(getting rom.zip from exe -> change name -> copy to PG32IMG.zip -> enter bootloader and let it work its magic..), didnt work so i tried with fastboot..(fastboot flash zip rom.zip)
this is the error i got..
sending 'zip' (351257 KB)... OKAY [ 70.625s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 111.906s
margolis said:
ty, Created gold card using this guide->http://forum.xda-developers.com/showthread.php?t=1104226
checked if it worked as writting in the guide above.. passed the tests
and then i tried to flash it normaly using PG32IMG.zip(getting rom.zip from exe -> change name -> copy to PG32IMG.zip -> enter bootloader and let it work its magic..), didnt work so i tried with fastboot..(fastboot flash zip rom.zip)
this is the error i got..
sending 'zip' (351257 KB)... OKAY [ 70.625s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 111.906s
Click to expand...
Click to collapse
OK, I have posted a pre-rooted version of the stock ICS RUU/ROM that can be installed via custom Recovery.
http://forum.xda-developers.com/showthread.php?t=1756500
i cant enter the recovery in this state... but i tried to load it using FASTBOOT
this is what i got:
C:\Android>fastboot flash zip vivo_signed_WWE_4.10.405.1_ICS_SENSE36_3.zip
sending 'zip' (365003 KB)... OKAY [ 69.641s]
writing 'zip'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 112.328s
after that i tried an older rom to see if something wrong with signature verifications, but i got the old message:
sending 'zip' (263083 KB)... OKAY [ 49.078s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 80.516s..
any more advices ?
margolis said:
i cant enter the recovery in this state... but i tried to load it using FASTBOOT
this is what i got:
C:\Android>fastboot flash zip vivo_signed_WWE_4.10.405.1_ICS_SENSE36_3.zip
sending 'zip' (365003 KB)... OKAY [ 69.641s]
writing 'zip'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 112.328s
after that i tried an older rom to see if something wrong with signature verifications, but i got the old message:
sending 'zip' (263083 KB)... OKAY [ 49.078s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 80.516s..
any more advices ?
Click to expand...
Click to collapse
You install this from recovery mode, not from fastboot. Boot into recovery and choose install from sd card.
tpbklake said:
You install this from recovery mode, not from fastboot. Boot into recovery and choose install from sd card.
Click to expand...
Click to collapse
as i mention above, i cant enter recovery mode..
any other suggesstions?.. im really stuck here...
What happens when you try entering recovery?
markj338 said:
What happens when you try entering recovery?
Click to expand...
Click to collapse
it makes same thing as reboot-bootloader, and enter into fastboot..
any ideas?
margolis said:
any ideas?
Click to expand...
Click to collapse
OK, I just read all of the posts again. In POST #11, you said you extracted the ROM.zip from the RUU and copied it to the SD card as PG32IMG.zip but it failed.
What error message did it fail with? I noticed that when you tried to flash the ROM.zip in FASTBOOT mode you got a signature error, so maybe you need to extract the ROM.zip again.
Also when you made the goldcard, which MMC value did you use? For the IncS you need to use MMC2.
Related
http://forum.xda-developers.com/showpost.php?p=16684717&postcount=38
Guys.. I'm in deep Trouble..
I was taking back my phone to stock by following the above link.. I did s-off to So-on.. But stucked at boot loader with Security warning..
The message shows is
*****LOCKED*******
****Security warning ****
Hboot-2.00.000
Radio - 3822.10.08.28_M
I was using RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed
shipped Rom..
My mainver is Shows in CMD - INFOversion-main : 2.30.405.1
Please Help me Guys..!! I'm stucked..!!
Please Help guys..~~
If your mainver is 2.30.405.1 you will need this RUU http://www.filefactory.com/file/c0a...5AU_3805.06.03.03_M_release_199308_signed.exe
You are using Windows, I gues. Follow this steps to install ADB and fastboot. (Extract the files to C:\Android like it says)
The next part should not be hard, since you already did this I gues. Run the RUU and when it is de-compressed to not press anyting and copy the rom.zip folder from your TEMP folder to C:\Android
Connect your phone to your pc/laptop in fastboot usb mode.
Open up cmd on your pc and use the following commands
cd C:\Android
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip rom.zip
That should work, because the same thing happend to me
Did Everything what you said..? But still i gets the same error message..
C:\Android>fastboot erase cache
erasing 'cache'... OKAY [ 0.144s]
finished. total time: 0.144s
C:\Android>fastboot oem rebootRUU
... OKAY [ 0.188s]
finished. total time: 0.188s
C:\Android>fastboot flash zip rom.zip
sending 'zip' (257756 KB)... OKAY [ 43.671s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 84.377s
Click to expand...
Click to collapse
use a gold card
I'm in Fasboot mode..!! I cant create goldcard from here..
kannanz said:
I'm in Fasboot mode..!! I cant create goldcard from here..
Click to expand...
Click to collapse
Post the output from
Code:
fastboot getvar all
minus imei and serial number.
Edit: you can use a gold card created in any android phone.
Here's it..
INFOversion: 0.5
INFOversion-bootloader: 2.00.0000
INFOversion-baseband: 3822.10.08.28_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.30.405.1
INFOserialno: ********
INFOimei: **************
INFOproduct: vivo
INFOplatform: HBOOT-7630
INFOmodelid: PG3213000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4158mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-af9874be
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: 0.029s
Click to expand...
Click to collapse
kannanz said:
Here's it..
Click to expand...
Click to collapse
There's no ruu posted anywhere for India. Try to create gold card in a friends phone or try this link for info http://forum.xda-developers.com/showthread.php?t=731424 you might need to enter recovery mode for adb commands to work
Ahh..!! Atlast Created Goldcard with my friends Htc and Patched Using Goldcard tool.. Now Working fine..
Thanks a Lot..
I know your problem is fixed but did you read this thread? Hope it helped
kannanz said:
Ahh..!! Atlast Created Goldcard with my friends Htc and Patched Using Goldcard tool.. Now Working fine..
Thanks a Lot..
Click to expand...
Click to collapse
Hi I got the same error as u except that my hboot is 1.16.0000. I have a gold card but i still got the failed error like yours. Help?
Mooseolly2 said:
Hi I got the same error as u except that my hboot is 1.16.0000. I have a gold card but i still got the failed error like yours. Help?
Click to expand...
Click to collapse
What error code are yo getting when you try to flash a RUU?
Hello all, first thank you for everything you provide us.
Second, sorry for mine english.
I have new HTC One (sprint) and love it, but about one week after buy it now i can't use it
After unlock and root phone i was have no problems, but before two weeks i was try to install google stock edition, step by step.. from tutorial.
After uploading this google edition zip file to the phone and select it from TWRP recovery to install this file, the phone was go to restart and show google logo and this is all... after hours waiting... the phone show only google logo.
I know for mistakes i was doing, in the tutorial i skip step about changing CID...
After this i was trying with RUU program for HTC One sprint - after many downloaded RUUs everyone in the end says - version incorrect.
I was try to flash new firmware in RUU mode, firmware is flashing correct, fastboot command return that flash is completed successful, but the progress line below HTC logo going to about 90% and stop.
When i go to TWRP and try to do anything like wipe or format or mount anything... phone say:
E:Unable to mount '/cache'
E:Unable to mount '/system'
E:Unable to mount '/cache'
and
E:TWFunc: :Copy_log -- Can't open destination lo
Here is some information that i read in bootloader:
TAMPERED
RELOCKED (i was lock to be able to install new firmware)
M7_WLS PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-1.00.20.0913_3
OpenDSP-v31.120.274.0617
OS-3.04.651.2
eMMC-boot 2048MB
Sep 18 2013, 15:46:04.0
Please help me to restore my phone to work again
Follow this guide, and best time only flash Sprint Roms
http://forum.xda-developers.com/showthread.php?p=44243635
Sent from my HTCONE using xda app-developers app
Thank you Konfuzion
Thanks Konfuzion,
you help me to go step up,
but again ruu i failed at the end, because hboot version incorrect
-------------------------------------------------------
C:\fastboot\platform-tools>fastboot flash zip romruu.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1029724 KB)...
OKAY [ 42.198s]
writing 'zip'...
(bootloader) adopting the signature contained in this imag
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
(bootloader) checking hboot version...
FAILED (remote: 44 hboot version check fail)
finished. total time: 148.907s
--------------------------------------------------------------------
About 7 hours i try to find something in forum that will help me, but without success.
Can you or somebody help me
rp
vasilmitov said:
Thanks Konfuzion,
you help me to go step up,
but again ruu i failed at the end, because hboot version incorrect
-------------------------------------------------------
C:\fastboot\platform-tools>fastboot flash zip romruu.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1029724 KB)...
OKAY [ 42.198s]
writing 'zip'...
(bootloader) adopting the signature contained in this imag
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
(bootloader) checking hboot version...
FAILED (remote: 44 hboot version check fail)
finished. total time: 148.907s
--------------------------------------------------------------------
About 7 hours i try to find something in forum that will help me, but without success.
Can you or somebody help me
Click to expand...
Click to collapse
you cant flash zip with/from fastboot
try this method
unlock the phone first "fastboot flash unlocktoken Unlock_code.bin", "fastboot erase cache"
flash custom recovery "fastboot flash recovery customrecoveryNAME.img"
download naked drivers for htc one http://dl.xda-developers.com/attach...1/9/3/4/8/1/4/Universal_Naked_Driver_0.72.zip but first delate/uninstal all htc drivers
download badboyz room for sprint htc one http://download1384.mediafire.com/kshtoo0psuvg/wa46yit8ls5wu1q/Bad_Boyz_Sprint_ONE_v1.1.zip
put this zip to your phone with adb "adb push Bad_Boyz_Sprint_ONE_v1.1.zip /sdcard//Bad_Boyz_Sprint_ONE_v1.1.zip"
boot into recovery instal Bad_Boyz_Sprint_ONE_v1.1.zip
it should work
Thank you lafomamone,
Thank you lafomamone,
this solve my problems,
finally my phone work again
I'm professional video-editor and graphic designer, if you need something to do for you i will be happy to write me.
Thx :victory:
vasilmitov said:
Thanks Konfuzion,
you help me to go step up,
but again ruu i failed at the end, because hboot version incorrect
-------------------------------------------------------
C:\fastboot\platform-tools>fastboot flash zip romruu.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1029724 KB)...
OKAY [ 42.198s]
writing 'zip'...
(bootloader) adopting the signature contained in this imag
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
(bootloader) checking hboot version...
FAILED (remote: 44 hboot version check fail)
finished. total time: 148.907s
--------------------------------------------------------------------
About 7 hours i try to find something in forum that will help me, but without success.
Can you or somebody help me
Click to expand...
Click to collapse
RUU fails because you need to be S-Off to flash the RUU it is a downgrade to 1.44...you have hboot 1.55, I dont know if there is a way to get S-off yet with 1,55, search threads to get S-off, then you will be able to flash the RUU
This is why I love this forum. I'm still in the noob starter program lol, so I don't post much at all yet, but the info you guys provide is priceless. Thank you THANK YOU very much!
did you try to use your HTC one from sprint on att network or any GSM net work with GOOGE EDITION stock android ? Please let me know. because i about to buy HTC one from sprint then convert to google edtion then use on ATT network.
Hi guys.
Yesterday I installed a theme that soft bricked my M7 (was hanging in boot animation).
So I tried to restore my phone to what it was before in recovery mode (TWRP installed). After I wasn´t able to locate the backup I tried to install a custom rom to be able to access the HTC One again. This was the biggest fail. It deleted my /system and /data and my internal storage and the installation of the rom failed. Since then I am only able to access TWRP and Bootloader.
When I try to install a custom rom with TWRP install, this happens:
Error flashing zip '/sdcard/ViperOne_4.2.0.zip'
Updating partition details...
E: Unable to mount '/data'
E: Unable to mount internal storage
Even wipe fails. Tried to install different roms (tried Guru Reset, too).
So I tried to reinstall my phone from the roots by using RUU. But this fails, too:
C:\Users\toolchain\Downloads\Compressed\HTCOneRoot>fastboot flash zip ruu.zip
sending 'zip' (234655 KB)...
OKAY [ 10.456s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 11.733s
C:\Users\toolchain\Downloads\Compressed\HTCOneRoot>fastboot flash zip ruu.zip
sending 'zip' (234655 KB)...
OKAY [ 10.454s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 11.941s
I tried to install the RUU with and without oem lock. Does not work.
Now I really don´t know what to do and I don´t want to send the mobile phone to HTC if I am able to fix it myself.
Extra information:
Tampered
Unlocked
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1
eMMC-boot 2048MB
I hope you are able to help me. I really need my phone working. Never install custom roms again...
Thank you.
You are not hard bricked. First seems like you don't have the correct recovery, try reflashing recovery than sideload a ROM.zip
Second you can't flash the ruu.zip from bootloader, that' why you get that error, you need to run the exe file from the computer
Sent from my HTCONE using Tapatalk
toolchain said:
Hi guys.
C:\Users\toolchain\Downloads\Compressed\HTCOneRoot>fastboot flash zip ruu.zip
sending 'zip' (234655 KB)...
OKAY [ 10.456s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 11.733s
Thank you.
Click to expand...
Click to collapse
And what exactly are you trying to flash? The file size looks way too small for a ruu.zip (which should be around 1GB, not 235MB).
TWRP most be 2.6.3.3 ver to flash Viper 4.2.
Sent from my HTC One using XDA Premium 4 mobile app
elvisypi said:
You are not hard bricked. First seems like you don't have the correct recovery, try reflashing recovery than sideload a ROM.zip
Second you can't flash the ruu.zip from bootloader, that' why you get that error, you need to run the exe file from the computer
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2251800
And there is no exe for my version.
nkk71 said:
And what exactly are you trying to flash? The file size looks way too small for a ruu.zip (which should be around 1GB, not 235MB).
Click to expand...
Click to collapse
I know that. But can you give me the exact version of ruu?
iamisraeli said:
TWRP most be 2.6.3.3 ver to flash Viper 4.2.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, might be my fail. Now I have CWM installed.
Thank you for your try to help.
SD card issue can be fixed by flashing stock recovery and doing a factory reset.
Can you paste your fastboot getvar all output ? Remove imei/sn
sent from my mobile device
I am looking for some help in getting my HTC One M7 back up and working.
I used the online Cyanogenmod installer on my at&t HTC One M7 and it worked for the most part including where it contacts the HTC site to place the phone in developer mode.
Unfortunately the radio was far weaker and was losing it's signal all the time. I tried a few nightly's in hopes it was a bug that would be addressed but the issue with radio strength continued. Then an alert about an update from Cyanogen popped up and I trustingly clocked OK thinking that perhaps THIS would fix the radio stregth issue and I can keep my rooted ROM. Instead it broke Bluetooth entirely.
So I watched a YouTube video on restoring to stock. Apparently I can't post the link,
I got all the way to the part where I use fastboot to install the zip, HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted.zip
It failed but not in the manner described in the video I believe it is due to the phone security set to S-ON but I have yet to find a way to set it back to S-OFF from where things are now.
This was the steps from the video I followed starting with fastboot getvar version-main and the fastboot oem lock
I then went through the following commands
C:\fastboot>fastboot erase cache
erasing 'cache'...
OKAY [ 0.054s]
finished. total time: 0.054s
C:\fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.031s]
finished. total time: 0.031s
C:\fastboot>fastboot flash zip HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted.zip
sending 'zip' (1249780 KB)...
OKAY [ 47.434s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 171.191s
And so it failed. The HTC screen came up but there was no progress bar so I know that fast boot is talking to the phone. I have been looking for a fix ever since and I am presently using a flip phone while working on getting the HTC One back.
Presently the phone boots directly into fastboot and will not allow me to do anything but reboot or power down but I can still use fastboot.
Revolutionary just sits at waiting for device.
The HTC One Toolkit is of no use as it also cannot see the device.
This is what is on the screen presently. Any help would be appreciated.
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4M.27.3218.14
OpenDSP-v32.120.274.0909
OS-5.12.502.2
eMMC-boot 2048MB
Apr 22 2014,01:10:58.0
FASTBOOT USB
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
Here is the results for fastboot getvar all
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4290mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.048s
TexMachina said:
I am looking for some help in getting my HTC One M7 back up and working.
I used the online Cyanogenmod installer on my at&t HTC One M7 and it worked for the most part including where it contacts the HTC site to place the phone in developer mode.
Unfortunately the radio was far weaker and was losing it's signal all the time. I tried a few nightly's in hopes it was a bug that would be addressed but the issue with radio strength continued. Then an alert about an update from Cyanogen popped up and I trustingly clocked OK thinking that perhaps THIS would fix the radio stregth issue and I can keep my rooted ROM. Instead it broke Bluetooth entirely.
So I watched a YouTube video on restoring to stock. Apparently I can't post the link,
I got all the way to the part where I use fastboot to install the zip, HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted.zip
It failed but not in the manner described in the video I believe it is due to the phone security set to S-ON but I have yet to find a way to set it back to S-OFF from where things are now.
This was the steps from the video I followed starting with fastboot getvar version-main and the fastboot oem lock
I then went through the following commands
C:\fastboot>fastboot erase cache
erasing 'cache'...
OKAY [ 0.054s]
finished. total time: 0.054s
C:\fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.031s]
finished. total time: 0.031s
C:\fastboot>fastboot flash zip HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted.zip
sending 'zip' (1249780 KB)...
OKAY [ 47.434s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 171.191s
And so it failed. The HTC screen came up but there was no progress bar so I know that fast boot is talking to the phone. I have been looking for a fix ever since and I am presently using a flip phone while working on getting the HTC One back.
Presently the phone boots directly into fastboot and will not allow me to do anything but reboot or power down but I can still use fastboot.
Revolutionary just sits at waiting for device.
The HTC One Toolkit is of no use as it also cannot see the device.
This is what is on the screen presently. Any help would be appreciated.
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4M.27.3218.14
OpenDSP-v32.120.274.0909
OS-5.12.502.2
eMMC-boot 2048MB
Apr 22 2014,01:10:58.0
FASTBOOT USB
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
Here is the results for fastboot getvar all
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3xxxxxxxxxxxxxx
(bootloader) imei: 354xxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4290mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.048s
Click to expand...
Click to collapse
Ok
First thing .. edit your post above and remove the Serialno and IMEI
second the file you downloaded is my TWRP Backup and has to be restored using TWRP ...not flashed
it would be easier for you to use the Guru Reset I made
here >> http://www.androidfilehost.com/?fid=23501681358545274
So unlock your bootloader and flash TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload the Guru Reset from within TWRP
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
clsA said:
Ok
First thing .. edit your post above and remove the Serialno and IMEI
Click to expand...
Click to collapse
Whooops!
Thanks for the heads up on that. I'll get to work on the fix and post an update later.
I am getting the signature verify fail error when attempting to load the recovery image now. Is this due to security being set on, S-ON?
C:\fastboot>fastboot flash recovery openrecovery-twrp-2.6.
3.3-m7.img
sending 'recovery' (9184 KB)...
OKAY [ 1.116s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.863s
I made sure the images were in the fastboot directory.
Directory of C:\fastboot
08/23/2014 12:56 PM <DIR> .
08/23/2014 12:56 PM <DIR> ..
04/05/2012 05:49 AM 162,816 adb.exe
04/05/2012 05:49 AM 96,256 AdbWinApi.dll
04/05/2012 05:49 AM 70,144 fastboot.exe
08/23/2014 12:48 PM 986,880,264 Guru_Reset_M7_5.12.502.2_clsA.zip
08/23/2014 12:42 PM 9,404,416 openrecovery-twrp-2.6.3.3-m7.img
5 File(s) 996,613,896 bytes
TexMachina said:
I am getting the signature verify fail error when attempting to load the recovery image now. Is this due to security being set on, S-ON?
C:\fastboot>fastboot flash recovery openrecovery-twrp-2.6.
3.3-m7.img
sending 'recovery' (9184 KB)...
OKAY [ 1.116s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.863s
I made sure the images were in the fastboot directory.
Directory of C:\fastboot
08/23/2014 12:56 PM <DIR> .
08/23/2014 12:56 PM <DIR> ..
04/05/2012 05:49 AM 162,816 adb.exe
04/05/2012 05:49 AM 96,256 AdbWinApi.dll
04/05/2012 05:49 AM 70,144 fastboot.exe
08/23/2014 12:48 PM 986,880,264 Guru_Reset_M7_5.12.502.2_clsA.zip
08/23/2014 12:42 PM 9,404,416 openrecovery-twrp-2.6.3.3-m7.img
5 File(s) 996,613,896 bytes
Click to expand...
Click to collapse
no your doing fine.. just unlock the bootloader
clsA said:
no your doing fine.. just unlock the bootloader
Click to expand...
Click to collapse
I'm not sure I am doing this right. I am getting what appears to be a syntax error.
C:\fastboot>fastboot devices
HT34XXXXXXXX fastboot
C:\fastboot>fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.023s]
finished. total time: 0.023s
This is the command I sued from the original YouTube video on locking it for stock ROM. It shows it as having already been locked now.
C:\fastboot>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.002s]
finished. total time: 0.002s
Stupid me, sorry. I had Cyanogenmod do it for me last time. I am on HTCDev getting my unlock token now.
TexMachina said:
I'm not sure I am doing this right. I am getting what appears to be a syntax error.
C:\fastboot>fastboot devices
HT34XXXXXXXX fastboot
C:\fastboot>fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.023s]
finished. total time: 0.023s
This is the command I sued from the original YouTube video on locking it for stock ROM. It shows it as having already been locked now.
C:\fastboot>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.002s]
finished. total time: 0.002s
Click to expand...
Click to collapse
no you have to go back to HTCDEV.com and get the unlock token from htc
clsA said:
no you have to go back to HTCDEV.com and get the unlock token from htc
Click to expand...
Click to collapse
Sorry about that. I had the Cyanogenmod install site do it for me last time.
I completed the unlocking but the Android Debug Bridge does not recognize the sideload command. It just spits back the help menu.
C:\fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.003s]
finished. total time: 0.146s
C:\fastboot>fastboot devices
HT34xxxxxxxx fastboot
C:\fastboot>fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
sending 'recovery' (9184 KB)...
OKAY [ 1.115s]
writing 'recovery'...
OKAY [ 0.718s]
finished. total time: 1.833s
C:\fastboot>fastboot erase cache
erasing 'cache'...
OKAY [ 0.050s]
finished. total time: 0.050s
C:\fastboot>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.034s]
finished. total time: 0.034s
C:\fastboot>adb sideload Guru_Reset_M7_5.12.502.2_clsA.zip
Android Debug Bridge version 1.0.29
... <entire help menu>
Perhaps my adb version is not correct. I did find reference to a push command in the help menu.
adb push <local> <remote> - copy file/dir to device
Also, there is that fastboot command I attempted to use before I unlocked the bootloader.
Also also, thanks for all the help.
edit: I didn't reboot into recovery. I did now but it is asking for a password
TexMachina said:
Sorry about that. I had the Cyanogenmod install site do it for me last time.
I completed the unlocking but the Android Debug Bridge does not recognize the sideload command. It just spits back the help menu.
C:\fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.003s]
finished. total time: 0.146s
C:\fastboot>fastboot devices
HT34xxxxxxxx fastboot
C:\fastboot>fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
sending 'recovery' (9184 KB)...
OKAY [ 1.115s]
writing 'recovery'...
OKAY [ 0.718s]
finished. total time: 1.833s
C:\fastboot>fastboot erase cache
erasing 'cache'...
OKAY [ 0.050s]
finished. total time: 0.050s
C:\fastboot>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.034s]
finished. total time: 0.034s
C:\fastboot>adb sideload Guru_Reset_M7_5.12.502.2_clsA.zip
Android Debug Bridge version 1.0.29
... <entire help menu>
Perhaps my adb version is not correct. I did find reference to a push command in the help menu.
adb push <local> <remote> - copy file/dir to device
Also, there is that fastboot command I attempted to use before I unlocked the bootloader.
Also also, thanks for all the help.
edit: I didn't reboot into recovery. I did now but it is asking for a password
Click to expand...
Click to collapse
theirs no password on TWRP
To sideload
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
clsA said:
theirs no password on TWRP
To sideload
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse
I appreciate all the help and I don't want to appear difficult but when I run the adb sideload Guru_Reset_M7_5.12.502.2_clsA.zip with the rom in the same folder adb simply refuses to recognize the sideload command. It spits back the help menu and I can't find sideload in said menu.
edit: I am using adb push to place the rom on the phones /sdcard directory and I am gong to use TWRP to install while in recovery mode. The copy is taking a while so if this is going to brick my phone let me know.
edit 2: now I don;t think I want to do this. The online resource don't mention anything specifically about installing a ROM using this method.
edit 3: I tried using the HTC One Toolkit which comes with adb 1.0.31. It gave me the following error
adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
HT34xxxxxxxx recovery
adb sideload "File Path..."
* cannot read 'sideload' *
adb sideload "C:\fastboot\Guru_Reset_M7_5.12.502.2_clsA.zip"
error: closed
I am going to the gym to clear my head. Thanks again for all the help so far.
TexMachina said:
I appreciate all the help and I don't want to appear difficult but when I run the adb sideload Guru_Reset_M7_5.12.502.2_clsA.zip with the rom in the same folder adb simply refuses to recognize the sideload command. It spits back the help menu and I can't find sideload in said menu.
edit: I am using adb push to place the rom on the phones /sdcard directory and I am gong to use TWRP to install while in recovery mode. The copy is taking a while so if this is going to brick my phone let me know.
edit 2: now I don;t think I want to do this. The online resource don't mention anything specifically about installing a ROM using this method.
Click to expand...
Click to collapse
your doing fine ..what was the error and why is sideload not in your version of TWRP ?
Is this the same resource that suggested flashing a TWRP recovery file with fastboot ? ... trust me you in good hands now ..just push the rom and flash it
during install choose no to install stock recovery and yes to Root the phone.
unless of coarse you want a stock unrooted phone
clsA said:
your doing fine ..what was the error and why is sideload not in your version of TWRP ?
Is this the same resource that suggested flashing a TWRP recovery file with fastboot ? ... trust me you in good hands now ..just push the rom and flash it
during install choose no to install stock recovery and yes to Root the phone.
unless of coarse you want a stock unrooted phone
Click to expand...
Click to collapse
I didn't realize the thread went to page 2. I thought you just dropped off the tread.
Sideload is in TWRP but it does ask for a password. I loaded TWRP 2.6.3.0 and it doesn't ask for a password.
I am pushing the Guru_Reset_M7_5.12.502.2_clsA.zip to /sdcard again. I will try the install once it is there.
TexMachina said:
I didn't realize the thread went to page 2. I thought you just dropped off the tread.
Sideload is in TWRP but it does ask for a password. I loaded TWRP 2.6.3.0 and it doesn't ask for a password.
I am pushing the Guru_Reset_M7_5.12.502.2_clsA.zip to /sdcard again. I will try the install once it is there.
Click to expand...
Click to collapse
I can't tell you if TWRP 2.6.3.0 will work with the Guru Reset ..it's very old and untested
if you saw a password in TWRP 2.6.3.3 you just swipe to make it go away
clsA said:
I can't tell you if TWRP 2.6.3.0 will work with the Guru Reset ..it's very old and untested
if you saw a password in TWRP 2.6.3.3 you just swipe to make it go away
Click to expand...
Click to collapse
I loaded TWRP 2.6.3.3 again and I have to hit cancel to get past the password. I then can go to ADB Sideload but it always says Failed at the top while the only thing in the terminal window is Updating partition details.
I loaded TWRP 2.7.1.1 and was able to load up ADB Sideload and attempt a sideload from HTC One Tools which uses adb 1.0.31. I still get a syntax error when trying to use sidelaod from the command line.
It got as far as 77% before failing with this error message
sending: 'sideload' 77%
* failed to write data 'protocol fault (no status)' *
I also keep getting unable to mount /data and unable to mount internal storage errors on the TWRP ADB Sideload terminal.
I need to quit for the night. It seems like I am getting closer to a solution though.
I'll use the backup flip phone and I'll just have to talk to people while out tonight I guess. Thanks for your help.
TexMachina said:
I loaded TWRP 2.6.3.3 again and I have to hit cancel to get past the password. I then can go to ADB Sideload but it always says Failed at the top while the only thing in the terminal window is Updating partition details.
I loaded TWRP 2.7.1.1 and was able to load up ADB Sideload and attempt a sideload from HTC One Tools which uses adb 1.0.31. I still get a syntax error when trying to use sidelaod from the command line.
It got as far as 77% before failing with this error message
sending: 'sideload' 77%
* failed to write data 'protocol fault (no status)' *
I also keep getting unable to mount /data and unable to mount internal storage errors on the TWRP ADB Sideload terminal.
I need to quit for the night. It seems like I am getting closer to a solution though.
I'll use the backup flip phone and I'll just have to talk to people while out tonight I guess. Thanks for your help.
Click to expand...
Click to collapse
Yeah have a great night.
When you get back >>
Is you phone sdcard full ?
have you done factory reset and or format data partition in TWRP?
If it's too full to push / sideload a rom.
TWRP does have a file manager feature you may need to free up space using it. adb 1.0.31 is the version i use all the time... never an issue.
you would get mounting errors if the partitions were formatted or erased...it's ok the new rom recreates them
TexMachina said:
I loaded TWRP 2.6.3.3 again and I have to hit cancel to get past the password. I then can go to ADB Sideload but it always says Failed at the top while the only thing in the terminal window is Updating partition details.
I loaded TWRP 2.7.1.1 and was able to load up ADB Sideload and attempt a sideload from HTC One Tools which uses adb 1.0.31. I still get a syntax error when trying to use sidelaod from the command line.
It got as far as 77% before failing with this error message
sending: 'sideload' 77%
* failed to write data 'protocol fault (no status)' *
I also keep getting unable to mount /data and unable to mount internal storage errors on the TWRP ADB Sideload terminal.
I need to quit for the night. It seems like I am getting closer to a solution though.
I'll use the backup flip phone and I'll just have to talk to people while out tonight I guess. Thanks for your help.
Click to expand...
Click to collapse
Point D here: http://forum.xda-developers.com/showpost.php?p=53270352&postcount=21
clsA said:
Yeah have a great night.
When you get back >>
Is you phone sdcard full ?
have you done factory reset and or format data partition in TWRP?
If it's too full to push / sideload a rom.
TWRP does have a file manager feature you may need to free up space using it. adb 1.0.31 is the version i use all the time... never an issue.
you would get mounting errors if the partitions were formatted or erased...it's ok the new rom recreates them
Click to expand...
Click to collapse
That final instruction did it. With the partitions cleared I was able to sideload the ROM and it installed without issue in from TWRP 2.7.1.1
Thanks for all the help.
TexMachina said:
That final instruction did it. With the partitions cleared I was able to sideload the ROM and it installed without issue in from TWRP 2.7.1.1
Thanks for all the help.
Click to expand...
Click to collapse
Great !! Thank you !
TexMachina said:
That final instruction did it. With the partitions cleared I was able to sideload the ROM and it installed without issue in from TWRP 2.7.1.1
Thanks for all the help.
Click to expand...
Click to collapse
clsA said:
Great !! Thank you !
Click to expand...
Click to collapse
a few months late to the party but how did you clear the partitions because I'm getting
E: Unable to mount '/cashe'
edit: Finished the adb push but HTC One still goes into Cyanogenmod......hopefully i can just leave this alone for a while cause atleast it turns on now
xaviergreaux said:
a few months late to the party but how did you clear the partitions because I'm getting
E: Unable to mount '/cashe'
edit: Finished the adb push but HTC One still goes into Cyanogenmod......hopefully i can just leave this alone for a while cause atleast it turns on now
Click to expand...
Click to collapse
after pushing a file you still have to install it
adb sideload copy's the file and installs it. Push does not
So, I've tried to get S-Off for a while, but my OS had to be the same as ROM version, so I did that. But here's where it went from bad to worse.. I flashed what I thought was a new ROM, but apparently there was no OS installed now.. It asked me if I wanted to unroot my phone in recovery, I unknowingly swiped yes.. So now I'm stuck here in fastboot without recovery and I can't flash a new recovery since I also did fastboot oem lock, and when I try to unlock bootloader all I get is "cannot open Unlock_code.bin" Any help would be greatly appreciated! I'm quite familiar with rooting, I've had similar ROMs on my phone before. The phone is from december 2013. Anyone knows what I can do
RichardFilipino said:
So, I've tried to get S-Off for a while, but my OS had to be the same as ROM version
Click to expand...
Click to collapse
not entirely necessary, sometimes helps, S-Off options (depending on your situation)
revone/moonshine -> rumrunner -> firewater -> sunshine (sunshine is by far the easiest and most reliable, but does cost $25)
RichardFilipino said:
It asked me if I wanted to unroot my phone in recovery, I unknowingly swiped yes
Click to expand...
Click to collapse
it asked you if you wanted to root, not UNroot.
RichardFilipino said:
"cannot open Unlock_code.bin"
Click to expand...
Click to collapse
cannot open / cannot load is usually MyFileNameIsWrong, or not in the same folder etc.
Sorry, I meant root yes..
The code name is right and it's in the right folder.. I've checked that multiple times even when trying to fastboot other files, recovery.img is able to read but not able to flash since I locked it..
RichardFilipino said:
Sorry, I meant root yes..
The code name is right and it's in the right folder.. I've checked that multiple times even when trying to fastboot other files, recovery.img is able to read but not able to flash since I locked it..
Click to expand...
Click to collapse
please:
1- post a "fastboot getvar all" (excluding IMEI and s/n)
2- post the directory contents
3- also, please post the complete command line output as you try to flash the unlock token
getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4330mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I can't post pictures yet is what it says .
RichardFilipino said:
getvar all:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
I can't post pictures yet is what it says .
Click to expand...
Click to collapse
Edit you post and remove your IMEI and s/n.
don't do screenshots, copy/paste command prompt
example:
Code:
C:\ADB2>cd \ADB3
C:\ADB3>dir
Volume in drive C has no label.
Volume Serial Number is 0622-9D4A
Directory of C:\ADB3
10/10/2014 16:37 <DIR> .
10/10/2014 16:37 <DIR> ..
30/09/2014 19:41 1,482 .twrps
06/02/2014 13:30 513,791 1.29.401.12_hboot_1.44.zip
21/03/2014 15:34 <DIR> 1.29.401.12_hboot_1.44_v2_old
28/03/2014 22:28 0 2014-03-28-adbsync.txt
21/12/2013 13:26 819,200 adb.exe
19/09/2013 22:17 98,304 adbsync.exe
21/12/2013 13:26 96,256 AdbWinApi.dll
21/12/2013 13:26 60,928 AdbWinUsbApi.dll
03/09/2013 13:05 4,164,094 aroma-2.70RC2.zip
30/09/2014 18:31 <DIR> BACKUPS
04/08/2014 18:47 493,416 blink.txt
06/06/2014 21:06 26,904 dmesg.txt
02/05/2014 18:39 0 enter
21/12/2013 13:26 160,256 fastboot.exe
07/03/2014 15:27 <DIR> fw
29/01/2014 18:58 25,271,322 fw_4.19.401.8_custom.zip
22/06/2014 17:22 30,308,418 fw_5.11.401.10_custom.zip
09/09/2014 19:09 30,305,900 fw_6.09.401.5_custom.zip
14/11/2013 21:54 3,645,591 Guru_Bootloader_Reset_1.0.zip
01/05/2014 11:51 1,047,040 mmcblk0p19_bak__xx.img
22/02/2014 14:18 1,047,040 mmcblk0p19_donkeykong1_repaired__xx.img
13/09/2014 13:45 1,047,040 mmcblk0p19_misc.img
02/05/2014 18:40 1,047,040 mmcblk0p19_repaired.img
01/07/2014 16:46 671,088,128 mmcblk0p36_cache.img
12/06/2014 12:22 262,144 mmcblk0p6_bak.img
19/11/2013 16:13 297,289,697 one-1.28.401.7-preloaded-modaco-withoutmovie.zip
09/06/2013 14:21 498,167 orig_hboot_1.44.0000_M7_RUUmode.zip
31/01/2014 11:35 <DIR> partitions
02/05/2014 15:31 <DIR> partitions_2014-01-13
29/04/2014 15:17 <DIR> partitions_2014-02-22
01/05/2014 16:41 <DIR> partition_x1
30/09/2014 18:31 <DIR> RECOVERIES
09/06/2013 16:02 648,208 revone
03/11/2013 21:56 249,028 Screenshot_2013-11-03-20-51-36.png
26 File(s) 1,070,189,394 bytes
10 Dir(s) 26,743,398,400 bytes free
C:\ADB3>
Code:
C:\ADB3>adb version
Android Debug Bridge version 1.0.31
C:\ADB3>fastboot devices
HT34xxxxxxxx fastboot <- you are in bootloader
C:\ADB3>fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
target reported max download size of 1514139648 bytes
sending 'recovery' (9184 KB)...
OKAY [ 1.209s]
writing 'recovery'...
OKAY [ 1.144s]
finished. total time: 2.354s
C:\ADB3>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.120s]
finished. total time: 0.120s
C:\ADB3>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.160s]
finished. total time: 0.160s
Oh it said excluding.. That was dumb.. Quite new to this all..
c:\adb>fastboot flash unlocktoken unlock.bin
error: cannot open 'unlock.bin'
RichardFilipino said:
Oh it said excluding.. That was dumb.. Quite new to this all..
c:\adb>fastboot flash unlocktoken unlock.bin
error: cannot open 'unlock.bin'
Click to expand...
Click to collapse
file name is wrong
I named it that myself.
RichardFilipino said:
I named it that myself.
Click to expand...
Click to collapse
In your fastboot command window type
Code:
fastboot flash unlocktoken
Leaving a space on the end
Then drag and drop the unlock_code.bin into the command window, and hit enter.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
That worked!
Although I tried to flash a stock RUU with the bootloader still locked..
c:\adb>fastboot flash zip "C:\adb\fastboot\RUU Zip M7_UL_JB43_SENSE50_MR_TMOUS_3
.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2_decrypted.z
ip"
target reported max download size of 1514139648 bytes
sending 'zip' (1180768 KB)...
OKAY [ 47.548s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 166.616s
RichardFilipino said:
That worked!
Although I tried to flash a stock RUU with the bootloader still locked..
c:\adb>fastboot flash zip "C:\adb\fastboot\RUU Zip M7_UL_JB43_SENSE50_MR_TMOUS_3
.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2_decrypted.z
ip"
target reported max download size of 1514139648 bytes
sending 'zip' (1180768 KB)...
OKAY [ 47.548s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 166.616s
Click to expand...
Click to collapse
The fact that dragging and dropping the file worked indicates that previously there was a problem with the files name or location. Check your using the correct fastboot/adb folder for both storing your files and running your commands.
You can't downgrade untill your s-off. Your hboot suggests your on 4.xx.531.x so you can't use that ruu.
If your phone is not booting you need to push a Rom and try to s-off first. The initial problem you had (with no os installed) was probably due to rom/recovery incompatibility.
Download Twrp 2.6.3.3 form here
http://techerrata.com/browse/twrp2/m7 and flash it in fastboot.
Code:
fastboot flash recovery "nameofrecovery".img
fastboot erase cache
Then boot to twrp recovery home screen and push your Rom
Code:
adb push "nameofrom".zip /sdcard
You can use the drag and drop method for these commands also (if you need) just remember to leave spaces in the appropriate places. The command window will appear unresponsive until the push completes. Once it's done install the Rom with twrp recovery.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Danny201281 said:
In your fastboot command window type
Code:
fastboot flash unlocktoken
Leaving a space on the end
Then drag and drop the unlock_code.bin into the command window, and hit enter.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Click to expand...
Click to collapse
Ah, I have to remember that one
Danny201281 said:
Your hboot suggests your on 4.xx.531.x so you can't use that ruu.
Click to expand...
Click to collapse
RichardFilipino said:
That worked!
Although I tried to flash a stock RUU with the bootloader still locked..
c:\adb>fastboot flash zip "C:\adb\fastboot\RUU Zip M7_UL_JB43_SENSE50_MR_TMOUS_3
.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2_decrypted.z
ip"
target reported max download size of 1514139648 bytes
sending 'zip' (1180768 KB)...
OKAY [ 47.548s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 166.616s
Click to expand...
Click to collapse
You can't use those RUUs, those are for US T-Mobile (MID= PN0713000 + CID: T-MOB010), you have a German T-Mobile (MID= PN0710000 + CID: T-MOB101)
so you should currently be on 4.xx.111.x
nkk71 said:
You can't use those RUUs, those are for US T-Mobile (MID= PN0713000 + CID: T-MOB010), you have a German T-Mobile (MID= PN0710000 + CID: T-MOB101)
so you should currently be on 4.xx.111.x
Click to expand...
Click to collapse
Ahh yes that makes more sense , i thought it should be with identifier 111 after searching cid and mid.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Danny201281 said:
The fact that dragging and dropping the file worked indicates that previously there was a problem with the files name or location. Check your using the correct fastboot/adb folder for both storing your files and running your commands.
You can't downgrade untill your s-off. Your hboot suggests your on 4.xx.531.x so you can't use that ruu.
If your phone is not booting you need to push a Rom and try to s-off first. The initial problem you had (with no os installed) was probably due to rom/recovery incompatibility.
Download Twrp 2.6.3.3 form here
http://techerrata.com/browse/twrp2/m7 and flash it in fastboot.
Code:
fastboot flash recovery "nameofrecovery".img
fastboot erase cache
Then boot to twrp recovery home screen and push your Rom
Code:
adb push "nameofrom".zip /sdcard
You can use the drag and drop method for these commands also (if you need) just remember to leave spaces in the appropriate places. The command window will appear unresponsive until the push completes. Once it's done install the Rom with twrp recovery.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Click to expand...
Click to collapse
TWRP 2.6.3.3 didn't work.. Recovery still gets me to the screen of fastboot usb..
RichardFilipino said:
TWRP 2.6.3.3 didn't work.. Recovery still gets me to the screen of fastboot usb..
Click to expand...
Click to collapse
So you flashed TWRP 2.6.3.3 and fastboot erase cache which were successful?
But when you boot to Recovery it goes back to the bootloader, Is that correct?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
So you flashed TWRP 2.6.3.3 and fastboot erase cache which were successful?
But when you boot to Recovery it goes back to the bootloader, Is that correct?
Click to expand...
Click to collapse
Yes, that is correct. Don't really know what options are left at the moment
RichardFilipino said:
Yes, that is correct. Don't really know what options are left at the moment
Click to expand...
Click to collapse
It's possible something has been flashed that maybe shouldn't have and made a mess of the partitions.
Try this :- Download this stock recovery
http://d-h.st/Eq1
And flash it with fastboot remember to fastboot erase cache, then try boot to Recovery. If it boots the screen will be blank for a short while, then display an image of a phone with red exclamation this is normal. Holding volume up and press the power button to reveal the stock recovery menu. Ignore the Mount sd card errors that's also normal in stock recovery. Now perform a factory reset and wipe cache.
Reboot the phone back to the bootloader and flash twrp 2.6.3.3 then fastboot erase cache. Hopefully now twrp will boot. :finger-crossed:
If it does go into the "Wipe" options and select " Format Data" you will be prompted to type yes to confirm. Then 're-push the Rom and install with TWRP.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
It's possible something has been flashed that maybe shouldn't have and made a mess of the partitions.
Try this :- Download this stock recovery
http://d-h.st/Eq1
And flash it with fastboot remember to fastboot erase cache, then try boot to Recovery. If it boots the screen will be blank for a short while, then display an image of a phone with red exclamation this is normal. Holding volume up and press the power button to reveal the stock recovery menu. Ignore the Mount sd card errors that's also normal in stock recovery. Now perform a factory reset and wipe cache.
Reboot the phone back to the bootloader and flash twrp 2.6.3.3 then fastboot erase cache. Hopefully now twrp will boot. :finger-crossed:
If it does go into the "Wipe" options and select " Format Data" you will be prompted to type yes to confirm. Then 're-push the Rom and install with TWRP.
Click to expand...
Click to collapse
Tried that:
Code:
c:\adb>fastboot flash recovery C:\adb\recovery_4.20.111.21.img
target reported max download size of 1514139648 bytes
sending 'recovery' (12422 KB)...
OKAY [ 1.527s]
writing 'recovery'...
OKAY [ 0.928s]
finished. total time: 2.456s
c:\adb>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.527s]
finished. total time: 0.527s
Went from fastboot USB to bootloader, tried to enter recovery.. Nothing, straight into fastboot USB again.
RichardFilipino said:
Tried that:
Code:
c:\adb>fastboot flash recovery C:\adb\recovery_4.20.111.21.img
target reported max download size of 1514139648 bytes
sending 'recovery' (12422 KB)...
OKAY [ 1.527s]
writing 'recovery'...
OKAY [ 0.928s]
finished. total time: 2.456s
c:\adb>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.527s]
finished. total time: 0.527s
Went from fastboot USB to bootloader, tried to enter recovery.. Nothing, straight into fastboot USB again.
Click to expand...
Click to collapse
sorry man I'm running out of ideas here. Only options left really is to flash firmware or an ruu. Unfortunately I can't find anything that will work for you with s-on.
What was the last recovery you had working on the phone?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good: