KERNEL SEGA V9
OCTOBER 16th RELEASED
A lot of work and research has gone into this Kernel, i hope everyone who uses it enjoys it
as it is one of the most stable kernels for our device.. once i master this kernel i will port it to other devices..
but i still got some more to do..... with motivation from the community i will work harder!... and stay here
(there are some really nice phones being released)
PRESS THANKS or BUY ME A COFFEE/BEER
Click to expand...
Click to collapse
4300+ Downloads since my first release!!!!
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
KERNEL SEGA TEST KERNEL 1
Test 1
WiFi Modules For Test
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For the test kernel this is what i would like feedback on
WiFi (Connection and Frequency)
Battery (Idle and Heavy Usage)
Overheating (When and How)
Smoothness (How Smooth and When does the lag come)
Gaming
Feedback should be accurate, valid and mature. I DON'T WANT "It's Good" or "It's Fast" or "How Do I Check"!!!!
use benchmarks, use different ROM's (Preferably ThSEGA V8 )..... Thank You..
P.S. Make sure you wipe dalvik cache after flashing
Click to expand...
Click to collapse
Version 9
Kernel SEGA V9
WiFi Modules V9
WiFi Modules V9
HOW-TO
Flash like any .IMG using flashtool preferably.... OR
USE FASTBOOT
Code:
fastboot flash boot KernelSEGAV(X).img
SOURCES
Changelog in POST 2
THANKS TO
SIRKAY!! FOR PUTTING UP WITH ALL MY NONSENSE
Jimbo77 for ALL his help
Chaosfirzen for some more help
Sirkay for EVEN more help
DooMLorD.. for toolchain
Championswimmer for kernel kitchen
LiquidRobotics For BOOTLOGO!!!
OLD DOWNLOADS
Kernel SEGA V8
WiFi Modules V8
VERSION 7]
WiFi Modules V7
Kernel SEGA V5 & wifi modules
V3
Kernel SEGA V3 (ARMY EDITION)
WiFI Modules for V3
V2
KernelSEGA-V2
KernelSEGA WiFi Modules-V2
V1
Kernel Sega V1
V1 WiFi Modules
V0.05
KERNEL-SEGA V0.05
CHANGE-LOG
V9
Fixes To BFQ
Smart Toggle (ARC users OC till 1709.0)
Battery Saving Tweaks
2 way call recording Patch
Very Smoooth
V8
Taskgroup Patch
Updated To 2.6.32.11
Reverted to CWM 5.5
Added More Governors
Vibration Notification before Entering Recovery
Gpu Tweaks
V7
Fixed Booting Issue... AGAIN
SEGA Ramdisk.. all new!!
Set cpu freq to low while in recovery and booting!!
CWM 6.0.1.2
V6.1
Fixed Booting Issue
Increased Wifi Frequency From 2.4 to 5ghz
V6
OC and UV!!!!! (finally)
Slqb allocator (activated)
cleancache driver
zram updated to 3.0.1
cleanup in kernel
V5
Added More IO SCHEDS
Added More Governors
Clean-Up Files
Fixed Memory Leaks
V4
Re-Based To .587 Sources
No OC & UV (YET)
Enabled AS, Noop, CFQ and Deadline IO Schds
Smooth...
V3 Army Edition
Intellidemand governor added
2 way call recording patch
SWAP
bfq sched added
new Bootlogo
vr sched added
added 0% battery fix
updated kernel to 2.6.32.10
V2
More Stable
Added More Governor (Smoothass, Lagfree, Brazilianwax, InteractiveX, SavagedZen, Minmax and scary)
Enabled I/O schedulers (Anticipatory and cfq)
Re-worked pll2 table (OC and UV should be better)
Reduced Boot.img size
V1
OC/UV Added
Bootlogo Changed (thanks to LiquidRobotics)
SIO i/o schedular added
Smartass & SmartassV2 Governors Added
Wifi Modules Included
V0.05
Initial Release
IMAGES
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Testing right now...nice Bootlogo
seems to be fast and stable, till now no issues
OC in upcomming relases would be nice and WiFi of course
Great!
You did a good job with this Kernel, very stable and fast, got no issues, no reboots everything is fine. The Batterylife is really awesome. :good:
i think No O/C, should Battery save:laugh:
My wifi not work. T_T
@SEGA:
Did you receive my PM with the Instructions on how to create the Wifi Modules?
probably you've changed the Kernel string name so you need to create the wifi modules as a separate package.
Kernel very good but wifi not work. I hope you fix it.
i'm using it, very good batery life. hope last version better. thanks
ax. wifi erro, have u fix wifi done
No reply?
guys this is a test
this is a TEST VERSION... no wifi!!!
please gimme some good feedback.. and i will then release next one!!
I want 2 section :
1 : OC up to 1.6 ghz .
2 : OC up to 2 ghz .
Wifi work ok like stock , only that . Love ur work man .
??
OceanXRun said:
I want 2 section :
1 : OC up to 1.6 ghz .
2 : OC up to 2 ghz .
Wifi work ok like stock , only that . Love ur work man .
Click to expand...
Click to collapse
sorry.. but i dont work for you.. i provide for the community... so saying stuff like
"i want" isnt going to help you here....
make your own kernel then... i will be willing to help you... but theres no need for orders
i don't like OC cpu, i like ur kernel, hope u will fix wifi soon
V1 released
OP UPDATED
V1 Released!!!
TheGreatSega said:
OP UPDATED
V1 Released!!!
Click to expand...
Click to collapse
I think something is wrong with V1, still got bootloop when Kernel boots up, no notification LED, no chance to enter CWM, then Phone freezes.
Downloaded it 3 times, still the same error
I waited for it long time ago. It's here :laugh:
Related
A quasi-stellar radio source ("quasar") is a very energetic and distant active galactic nucleus. Quasars are extremely luminous and were first identified as being high redshift sources of electromagnetic energy, including radio waves and visible light, that were point-like, similar to stars, rather than extended sources similar to galaxies.
~~~
Quasar is the kernel that comes with Nova ROM. It's based on LG sources but improved where possible and increased in features. It's a very progressive work. The first releases may also be experimental, we need to test out which changes are for better and which ones are for worse; I hope you can all help me with this task.
Now available for stock ROMs!
Download: Quasar v8 > DO NOT FLASH THIS ON NOVA
Instructions: Flash in custom recovery, no wipes needed. (For this version there's no OC support)
Main features
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EXT4 support
TinyRCU
Compiled with latest Code Sourcery toolchain for stability
3rd-party I/O Schedulers
3rd-party Governors (lots of them)
Support for CPU unaligned access & Config_HZ=100
CIFS, TUN and ZRAM (disabled) support
SLQB
Stochastic Fair Blue Network Scheduler & jHash 3
Changelog
v8 - 31/8/2011
CONFIG_HZ=200
Smartass-v2 heavily optimized
Added Anticipatory I/O Scheduler
v7 - 28/8/2011
Compiled with performance flags
IPv4 tweaks > even faster browsing
Updated and tuned many governors to our device (improved InteractiveX, BrazilianWax, MinMax)
Updated Smartass v1 to v2 (very good, use it!)
v5 - 26/8/2011
Compiled with latest Code Sourcery toolchain for max stability
Decreased CONFIG_HZ to 100 to save battery! (Increasing it has no effect)
Disabled CGROUPs for better performance (shouldn't be on in 2.2)
Switched TCP Congestion to Veno instead of Cubic for faster internet speed
VR is now the default I/O Scheduler
v3 - 9/8/2011
Opti flags
CFS tweaks
Disabled FTRACE
Added ZRAM support (disabled)
Added TinyRCU
Added jHash 3
Added SLQB
Config HZ at 300
Stochastic Fair Blue Network Scheduler
v2 - 30/7/2011
Increased VM readahead value
CFS tweaks
Glibc memory copy macros and functions
Improve performance of memcpy and memmove
Vmap area cache
Added CIFS and TUN support
v1 - 28/7/2011
Added V(R) I/O Scheduler and Simple I/O Scheduler
Enabled Deadline Scheduler
Allowed support for CPU unaligned access
Added many governors
Some fixing
v0 - 26/7/2011
Enabled EXT4 support
Compiled with Linaro optimized toolchain.
Optimized for Cortex-A8.
Informations on governors and I/O Schedulers: http://forum.xda-developers.com/showthread.php?t=1242323
How can I test which governor or I/O scheduler is better for my device?
I tried quadrant and I get lower score with savagedzen governor + V(R) I/O than the default setting...
thx for sharing your code
i04055 said:
How can I test which governor or I/O scheduler is better for my device?
I tried quadrant and I get lower score with savagedzen governor + V(R) I/O than the default setting...
Click to expand...
Click to collapse
Ignore quadrant. It's unreliable and fluctuates a lot.
These things happen in the background.
It's daily usage that will tell you which one is better.
It is valid for load debian or ubuntu?
Enviado desde mi LG-P970 usando Tapatalk
Vorks with stock V10B ROM?
Could you release your kernel without rom ? I am stock rom user and i really miss minmax governor..
XER0123 said:
Could you release your kernel without rom ? I am stock rom user and i really miss minmax governor..
Click to expand...
Click to collapse
It's too troublesome.
The ramdisk for nova and stock is different and I don't feel like releasing 2 versions each time a new Quasar gets out. I could share the zImage and let someone else get it to a flashable boot.img though.
Noejn said:
It's too troublesome.
The ramdisk for nova and stock is different and I don't feel like releasing 2 versions each time a new Quasar gets out. I could share the zImage and let someone else get it to a flashable boot.img though.
Click to expand...
Click to collapse
I just need minmax governor.
with ondemand , there are little lags in games.. with performance governor no lags but my battery go down fast..
Updated to v3; will be released on Nova's next version.
One more for the changelog: SLQB.
Waouh thanks you're fast.
Sent from my LG-P970 using XDA Premium App
Noejn said:
Updated to v3; will be released on Nova's next version.
Click to expand...
Click to collapse
Couldnt you release only one version for stock users.. If you only release v2 (has many custom governors) will be enough..
XER0123 said:
Couldnt you release only one version for stock users.. If you only release v2 (has many custom governors) will be enough..
Click to expand...
Click to collapse
I already replied that to you 2 times.
Anyway, one more addition: Stochastic Fair Blue Network Scheduler.
Noejn said:
I already replied that to you 2 times.
Anyway, one more addition: Stochastic Fair Blue Network Scheduler.
Click to expand...
Click to collapse
Oh, i think i could live without it Anyway thank you for sharing your tweaks..
Alright, I made a version compatible with stock ROMs, link on first page.
By the way, thanks to those who mass voted 1* on this thread. Kids. >>
Noejn said:
Download: http://www.multiupload.com/S74Q4HGYYY > DO NOT FLASH THIS ON NOVA
Instructions: Flash in custom recovery, no wipes needed.
(For this version there's no OC support)
Click to expand...
Click to collapse
Basically I can't (rather shouldn't) install this update on Nova right? I checked Nova's changelog and didn't see the new quasar kernel listed.
All Nova ROM have the latest Quasar version, no need to flash anything.
The fact that you have launched Quasar v3 for stock roms... does it mean that finally is compatible with 10e rom version?
Will you try to make a new rom with this new base in a future?
Regards.
Huexxx said:
The fact that you have launched Quasar v3 for stock roms... does it mean that finally is compatible with 10e rom version?
Will you try to make a new rom with this new base in a future?
Regards.
Click to expand...
Click to collapse
Thank you for sharing your kernel with stock users
I flashed kernel with stock rom, wifi is not working
Oh and finally, minmax governor <3
Please note the Kernel Will only Work in ROM based on ICS for Example: JJ's ROM, ICS Beta, ICS Official, MIUI V4, Arconium ICS etc... but not in CM9 since it uses its own Kernel.
Hi Guys!
First and foremost i'd like to thank all the great developers for the Sony (Ericsson) phones specially FXP (Jerpelea), Zdizihu, Bin4ry, Blagus and DoomLord. I've been part of the development experience since back on the X10 days when J&Z teamed up to create the first working version of Froyo for us and now that I've jumped to the Arc wagon it's great to see them supporting us as well.
I've worked/read a lot trying to understand how Android works and litle by litle i've understand a lot of things and doing my experiments as well. I'm not by any means a "Huge", "Great" or Super Skilled developer such as the ones mentioned above but i'm learning and trying to be just like them to bring more things to our devices.
Based on the experience I want to give back something to such rich community that have helped me in one way or another, this is the reason why I'm giving you my Arc-Night Kernel.
Why the name "Arc-Night Kernel"
Well I work from 7Am to 5Pm, I'm married and recently my first baby was born so as you might know it really takes a lot of time to take care of all that, hence the development/reading have happened during the nights only (Up to 12am).
Ok, enough said I want to know what's this kernel all about!!
The kernel was made for personal use, it was a personal project to understand what the kernel is and how it is build. I made it and then all the porting, tweaking started until i realized why not let other users more options other than stock plus and DoomKernel (Which are great by the way).
Kernel Main Features/ Changelog:
ArcKnight_4.1_Version:
Go Here!!!!
ArcKnight_4_Version:
Go Here!!!!
ArcKnight_Kernel_RC3.5.1_TEST_Versions:
Go Here!!!!
ArcKnight_Kernel_RC3.5.1_TEST_Versions:
Go Here!!!!
ArcKnight_Kernel_RC3.5_TEST_Versions:
Go Here!!!!
ArcKnight_Kernel_RC3.4_TEST_Version:
Go Here!!!!
ArcKnight_Kernel_RC3.3_Test_Versions:
Go Here!!!!
ArcKnight_Kernel_RC_3.1:
Go Here!!!!
ArcKnight_Kernel_RC3:
Go Here!!!!
ArcKnight RC2.2 - Joker_BFS:
Go Here!!!!
ArcKnight RC2.2 - Joker Edition:
Go Here!!!!
ArcKnight RC2:
Go Here!!!!
ArcKnight RC1:
Go Here!!!!
ArcKnight V8:
Go Here!!!!
ArcKnight V7 FINAL:
Go Here!!!!
Version 6:
SKIPPED - IT WAS PRIVATE BETA TESTING.
Version 5:
Go Here!!!!
Version 4:
Go Here!!!!
Version 3:
Go Here!!!!
Version 2:
FIXED Camera Error with some Extra RAM yet...
Version 1:
OverClock up to 2GHZ.
Init.d Scripts Support.
Slightly Modified voltages Table (UV).
CMW Pre-installed - Thanks to Cobrato.
Increased RAM by reclaimed Unused Cam Memory (FXP Sources).
0% Battery Friendly - Thanks to Bazoocase.
Tweaked Conservative Governor (Based on Midnight Kernel (SGS).
Tweaked Sio Scheduler.
Two Way Recording Call patch (Didn't test it).
Tweaked Ondemand Governor (Based on Zachariasmaladroit's work (SGS)).
Powersave, Performance and Conservative as Available Governors.
Deadline and Noop as available Schedulers.
Support for ext2,ext3,ext4 and NTFS FileSystems.
Based on ICS Beta Sources.
Extra Addon with Modules so Users can load just what they Want! (More details on this below).
The Addon Package is an stand alone flashable zip that includes a number of modules so the user decides wether he/she use them or not, it is like removing bloat ware and to give the user the free to choose how to tweak their own phone.
List of available modules that can be insmoded after the kernel has booted:
SIO io scheduler.
VR io scheduler.
CFQ Frequency Governor.
SmartAss Frequency Governor.
SmartAssV2 Frequency Governor.
Powersave Frequency Governor.
TWEAKED Ondemand Frequency Governor.
AS io scheduler.
Userspace Frequency Governor.
Cifs.ko.
Tun.ko.
To load any of those modules just do insmod /system/lib/modules/"nameofthemodule" and if you want to use them at boot time you can use a init.d script.
Bugs Known Issues:
Update April 27: NONE AT THE MOMENT!!!
How to flash Arc-Night Kernel:
Put the phone in Fastboot mode
In terminal do: fastboot flash boot Arc-Night_Kernel_V1.img
Hit Enter
When Led lights turn on press any key to go into recovery.
Clean Cache and dalvik Cache to avoid any issues.
If you come from DoomKernel be sure to start from scratch since most likely you have flashed his WiFi modules and it will not work on my Kernel.
Downloads/Recomendations in Second Post!
Updates Plans
Port other Frequency Governors Like Lagfree, BFQ, etc...
Fix Camera Issue without removing the Reclaimed Camera Memory - Done in V2
Create Script to be used like Supercharger to load specific modules chosen by user only.
Upgrade WiFi drivers to provide more signal range (Just like in FXP's CM9).
Sources?: Here!!
Downloads! and Recomendations...
Main Kernel - ArcKnight Kernel_4.1 - Link Not Working
Modules for Kernel - ArcKnight_4.1_Modules - Link Not Working
ArcKnight 4.1 Mirror Links HERE
Old Downloads:
Version one
Version two
Arc-Night_Kernel_V3
Arc-Night_Kernel_V3a
Arc-Night_Kernel_V4
ArcKnight Kernel V5
ArcKnight Kernel V7 FINAL
ARC-Night-ICS-BETA-Modules.zip
ArcKnight Kernel_V8
ArcKnight Kernel_RC1
ArcKnight Kernel_RC1_Wifi_Modules
ArcKnight Kernel RC2
RC2 Wifi Modules
ArcKnight Kernel RC2.2 - Joker Edition
Joker_Edition_Wifi_Modules
ArcKnight Kernel_Joker_BFS
Joker_Edition_BFS_Wifi
ArcKnight Kernel_RC3
ArcKnight_Kernel_RC3_Wifi_Modules
ArcKnight Kernel_RC3.1
ArcKnight_Kernel_RC3.1_Wifi_Modules
ArcKnight Kernel_RC3.4
ArcKnight Kernel_RC3.5_STOCK
ArcKnight Kernel_RC3.5_OC
ArcKnight Kernel_RC3.3_STOCK
ArcKnight Kernel_RC3.3_OC
ArcKnight Kernel_4
ArcKnight_4_Wifi_Modules
RECOMENDATIONS:
If you come from DoomLord's Kernel (ICS) you'll need to flash the file doomed151 kindly uploaded for your WiFi to work!!! go HERE
ALWAYS and I Mean ALWAYS reboot the phone RIGHT AFTER you have disconnected it from the computer or charger to avoid the f*king Android OS issue
I want to support other phones as well but my budget is really limited at the moment so if you FEEL like helping me in funding to buy an Xperia S or even a Ray, Neo, Play etc... help me by donating to the cause just click HERE and you'll be helping me a lot, even if it is 1 Dollar
Would you like showing your support to my work with other Members?
Kindly request you to add the following Signature Banner created by User LiquidRobotics :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ScreenShots
NEW TEST VERSIONS:
Main Kernel OverClocked CPU - ArcKnight Kernel_RC_3.6_OC_TEST
Wifi Modules - ArcKnight_Wifi_Modules.zip
always nice to see fresh development around here not much going on compared to other devices i've had over last few years that were more mainstream
if i manage to d/l miui v4 in a reasonable time i'll be sure to try this
Sounds very promissing. I test it and report you my results
a2sdx compatible?
Sent from my LT18i using Tapatalk
I haven't tried a2sdx, it is working fine with Link2sd though... Why don't you test it and let me know if it is working?
BTW The kernel supports Ext2, Ext3, Ext4 and NTFS File Systems... I'll add it to OP...
jimbo77 said:
I haven't tried a2sdx, it is working fine with Link2sd though... Why don't you test it and let me know if it is working?
BTW The kernel supports Ext2, Ext3, Ext4 and NTFS File Systems... I'll add it to OP...
Click to expand...
Click to collapse
Where did u get a2sdx?
Hi Jimbo, the wifi is broke and not able to start.
Appreciate the work
hazenvnn said:
Hi Jimbo, the wifi is broke and not able to start.
Appreciate the work
Click to expand...
Click to collapse
Weird! It is working fine here, did you read the how to in OP? If you come from DoomLord Kernel and have flashed his Wifi Modules then i'm afraid it will not work since his Modules are specific for his kernel.
You'll have to do a fresh install of both my kernel and the ROM you're using at the moment, then the Wifi should work (I've had this very same kernel for more than 18 hours now and the wifi link is really strong here with no disconnects or something related)
I did full install on both ROM and Kernel, flashed your provided modules only.
And testing it on Original Xperia S Rom Beta 5 for Arc / Arc S.
Well I didn't test the Kernel with Xperia S rom since it was build from ICS Beta Sources. The kernel will fully work only with ICS based ROMS like ICS Beta, MIUI V4, JJ's ROM's, Doomed151 Roms etc...
I'll use the kernel with ICS roms.
Btw, check your signature, there's uncompleted html quote
davibs said:
Where did u get a2sdx?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1333379
jimbo77 said:
I haven't tried a2sdx, it is working fine with Link2sd though... Why don't you test it and let me know if it is working?
BTW The kernel supports Ext2, Ext3, Ext4 and NTFS File Systems... I'll add it to OP...
Click to expand...
Click to collapse
I flash this one http://forum.xda-developers.com/showthread.php?t=1333379 to Doomkernel V4 is working on jjs ROM Cocktail, ext4, I will try to flash your kernel after I finish work, I really looking for more powerful and updated kernel, btw your kernel looks very promissing hope It's compable thanks for your work
UPDATE! Version 2 is OUT for Testing!
I´ve fixed the error on Camera and yet we have some extra FREE RAM!! Also I tested my Version 2 Kernel with the Official Release and it´s working ROCK Solid with no lags or whatever...
Grab the version 2 in 2nd post!
Please provide feedback as soon as you can.
Jimbo!
V2 doesnt work on CM9, im getting stopped proccesses
Cm always uses cm kernel
Sent from my LT18i using xda premium
i'm amazed by this, now only waiting for final version sources and your kernel
stirkac said:
i'm amazed by this, now only waiting for final version sources and your kernel
Click to expand...
Click to collapse
Thank you for Testing!
Can you please share what your settings are? What Scheduler, Governor, Frequency?... What ROM are you using, so others members can also compare?
I'd really appreciate if you could provide a litle more detail on the feedback so I can improve what's not working as it should.
Thanks!
Jimbo
Kernel works very good.
However after every reboot governor is always Ondemand (should be conservative- set using SetCPU). Maybe setting Conservative as default would be a good idea?
Also could you enable lowest cpu clock (127 MHz iirc)?
Wysyłane z mojego LT18i za pomocą Tapatalk 2
Hey hey hey,
proudly presenting my aosp kernel for you. Big thanks to Codeworkx, this kernel is based on his source! I´m not responsible if something happens to your device!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel can be used on:
- Every AOSP based rom (e.g. AOKP, CM9, Rootbox...)
Features:
- OC to 1.35Ghz
- GPU OC to 383mhz
- RAM OC
- UV
- I/O Tweaks
- Patches for better batterylife
- Performance Tweaks
- Fastcharge
- Swpa
- zRam
- NTFS and CIFS
Changelog (3.2.0):
Based of latest source code (the updated one)
Only compiled for jellybean (based on that updates)
Massive cleanup
Optimized code used
Optimized undervolting
Really the fastest horsepower ever
Added 1.5Ghz Overclock
Added OMAP_IPU_IDLE_CONFIG
Added reduced wifi voltages for power savings
Updated SIO
Tweaked CPU-IDLE governor
Fixed 1.35Ghz jumping back
Fixed screenFlickring
Fixed screenoff animation failing sometime
Fixed heat -> lower cpu voltages should be stable enough
Changelog (3.1.0):
Now again booting
Horsepower is complete rebased - clean - fast - stable
ClockWorkMod autoreboot issue is fixed
All sources updated -> speed
USB Mass storage is working correct now on aosp kernel
Default governor is now abyssplug
Changelog (3.0.0):
Horsepower is now available as a BETA version for stock roms
Low RAM OC
Performance tweaks
Code Cleaning
Preparing for dualboot (still long way to go)
Changelog (Release 2.1.5):
Added savagedzen governor
Added sakuractive governor
Added brdzilianeax governor
Added minmax governor
[*]Added abyssplug governor
Added lulzactive governor
Added lazy governor
Added pegasusq governor
Added smartassv2 governor
Added scary governor
Added HYPER governor
Added wheatley governor
Updated interactive governor
Updated interactiveX governor
Updated lagfree governor
Changed default governor to smartassv2
Changelog (Release 2.0.6):
Rebased ics kernel
No Touch recovery for both (ics and jb) versions
Added possibility to undervolt
300 mhz as default cpu speed
Changelog (Release 2.0.0):
Jellybeaned! Both versions (ics and jb) contain same features
Changelog (Release 1.3.5):
Added core2 managemend
Fully working settingsfor fastcharge (through app)
Hope to improve stableness by disabling interactivex governor. Thanks to aidfarh!
Touch and no touch recovery versions
Changelog (Release 1.3.1):
Added interactiveX governor
Added lazy governor
Enabled ip tunneling
Changelog (Release 1.3.0):
Enabled fastcharge (enable in app)
Enabled zRam (partly working, full support in jellybean)
Enabled NTFS support
Enabled CIFS support
Added Touch CWM (Swipe up + down to navigate; swipe right to select; swipe left to go back)
Improved CWM
Improved TouchScreen support
Changelog (Release 1.1.0):
Fixed Wlan
Fixed OC
OC Tweaks
Initial GPU OC to 384mhz
Set min processor speed to 0.15Ghz for better batterylife
Rebuild whole kernel
Added more I/O tweaks
Added USB fast charging
First start at deep idle not fully working yet
Improve kernel stability by not killing kernel threads
Changelog (Initial Release 1.0.3):
keyboard: cypress: Stop notification on low battery
improve the performance of memcpy and memmove of the general version
i/0 tweaks
initial OC to 1.3Ghz
expanded OC to 1.35Ghz
prepared for lulzactive gorvernor
For detailed information visit my github commit list
Installation instructions:
- Download the attached .zip
- Put it to your internal sd-card
- Go into recovery mode
- Hit "install zip from sdcard"
- Reboot and enjoy
Download:
Horsepower 3.0.0 for Stock ICS Roms BETA!
Horsepower 3.0.0 for AOSP ICS Roms
Horsepower 3.1.0 for AOSP Jellybean Roms
__________
Core2Management:
Save your battery and disable the second core of your android device when you dont need it!
!- This app is only for dual core devices made by Samsung -!
This app should work on most android dual core devices from Samsung (maybe also on others but these are untested!). Please report on which devices the app works and on which it doesnt. You have to be rooted! Every time you reboot you need to redisable second core! If the second core starts again at some time use another governor. Not working with hotplug!
Tested devices:
* Galaxy S2 I9100
* Galaxy S2 I9100G
* Galaxy S3
* Galaxy S1
* Galaxy R I9103
* Galaxy Nexus
The app is working with stock cm10 kernel, too!
__________
Sources:
https://github.com/fuss132/android_kernel_samsung_t1/
Awesome!
Gesendet von meinem GT-I9100G mit Tapatalk 2
Now that's what i'm talking about !!
You are the BEST fuss!
This is God like! ^^
YESSSSS :beer:
Sent from my GT-I9100G using Tapatalk 2
Than man u are the best
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Great but am I missing something or the download link isn't available yet ?
dante10 said:
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Click to expand...
Click to collapse
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
Madarox said:
Great but am I missing something or the download link isn't available yet ?
Click to expand...
Click to collapse
I added it in this second
I've no access to market! Could you upload the app please ?
pesiran said:
I've no access to market! Could you upload the app please ?
Click to expand...
Click to collapse
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
The things looks better for our G version thanks to those awesome devs
Enviado desde mi GT-I9100G usando Tapatalk 2
fuss132 said:
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
I added it in this second
Click to expand...
Click to collapse
oh...sorry didn't see it was based on CM9 kernel..code says CM9 kernel have those MMC thing disabled so its safe from those brick bug...i assume this kernel also safe because it is based on CM9 kernel...good work buddy...
fuss132 said:
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
Click to expand...
Click to collapse
Not found Error !
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Agree, but cpu is stable. Now higher scores in benchies Thanks man, hope you will fix the wifi problem.
wifi cm9 rc1?
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Madarox said:
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Click to expand...
Click to collapse
cesco73 said:
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
Click to expand...
Click to collapse
Youre all on CM9 right?
I already found the problem fix soon... Your rom needs an updated wlan.ko module Those cm9 roms these days
If you would use aokp it would be working ^^
WIFI is not working on rootbox too !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is based on Semaphore Kernel by stratosk with a few changes I felt to be missing in semaphore.
This kernel combines the speed and stability of semaphore along with few additions for the best combination.
It is compatible with all JB 4.3 ROMs based on official CM10.2 layout.
Kernel versions 2.9.0 and lower are compatible with JB 4.2.x.
Differences with Semaphore
Entropy tweaks
Patched for 720p usage
Kernel Samepage Merging (KSM) enabled
ZRAM enabled as module (usable via init.d script, attached below)
SWAP enabled
FRANDOM module included
Some Kernel Debug related stuff disabled
Wheatley Governor added (select via Setting->Performance-> CPU)
Intellidemand Governor added (select via Setting->Performance-> CPU)
Lulzactive Governor added (select via Setting->Performance-> CPU)
Lazy Governor added (select via Setting->Performance-> CPU)
Lagfree Governor added (select via Setting->Performance-> CPU)
Load_freq(4*HZ+61) to avoid Loadavg Moire
A bit more RAM ( 1MB more )
Read Ahead increased to 1024kB max
Using Neon instead of SoftVFP
Ondemand , Conservative , smartassv2 , lulzactive , lazy and interactive tweaked
ROW , SIO , SIOplus, Deadline , BFQ and CFQ Scheduler tweaked
Normal OC Steps ( upto 1400MHz )
XZ Compression for Kernel and initramfs
Optimized AES and SHA1 routines
CPU Unaligned Access
TUN enabled by default
Block and ROW improvements
BFQ IO Scheduler
FIFO IO Scheduler
ZEN IO Scheduler
VR IO Scheduler
SIOplus IO Scheduler
EXT4 patches
Other optimizations
Selective Live OC
ROW Updates
SIOPlus tweaks
Optimized Flags
SQLB Memory Allocator
GPU Driver updates
WiFi Driver updates
RCU updates
Disabled SAI
Dynamic Dirty Page Writebacks
TCP Tweaks
ION Patches
Click to expand...
Click to collapse
General Features
Based on Linux Kernel 3.0.99 and Semaphore 3.20s
397-409MB Usable RAM
Live OC ( Upto 130% )
Compiled with Cortex A8 Optimized Linaro GCC Toolchain
Click to expand...
Click to collapse
Thanks to
Stratosk for his source and all his help
Fishears for some of his code
kasper_h for some of his code
derteufel1980 for some of his code
Atomixxx and didhiy (for bootlogo)
Nick0703 for normal OC code
Christopher83 for toolchain
Franco's Dev Team [ malaroth, osm0sis, joaquinf, The Gingerbread Man, pkgnex, Khrushy, shreddintyres ]
All people on stratosk's list
All people who have inspired me , supported me and stood by me
Changelog of latest version
1. Updated Linux Kernel v3.0.99
2. Updated Ramdisk for 4.3 support
3. Lazy Cache Flushing on non-mapped pages
4. Yaffs Filesystem patches.
5. Bigmem patch updated for 4.3
6. FUSE FS now compiled into kernel
7. SIOPlus tweaks
8. Lagfree tweaks
9. Block update (recursively merge requests)
10. Dynamic management of Dirty Page Writebacks (thanks christopher83)
11. Tons of patches to ION
12. Build Logger into kernel
13. Using Latest 2013/09 Toolchain
14. Disabled In-Call Volume Control
15. Lots of other patches (see source for info)
Point to note
Ticking BigMem will break 720p recording
To control modules , please use Semaphore Manager from Play Store.
All bug report of this kernel must be posted in this thread , with a clear description of the error , its reproducability , your ROM , any custom settings etc.
Please use it at your own risk! I am not responsible for any damage that may occur to your device.
Please note that I personally dont have a Vibrant , I use the i9000, so that means , you tell me the bugs and issues.
Sources
CyanCore Kernel - Click Here
Semaphore Kernel - Click Here
ICS-Ramdisk - Click Here
Other versions
1. Galaxy S i9000 - Thread Link
2. Captivate - Thread Link
Re: [JB 4.2][Kernel] CyanCore-vibrant v1.5
I had non idea you were doing this! Amazing!
Sent from my SGH-T959 using xda app-developers app
Can i still use semaphore manager with this kernel?
Re: [JB 4.2][Kernel] CyanCore-vibrant v1.5
Mostdef said:
Can i still use semaphore manager with this kernel?
Click to expand...
Click to collapse
Yeah semaphore manager will control modules.
Id est quod est
Seem everything working good. Notice the camera and video recording much smoother now.
Please dont flash the 1.7 version , I messed something up. It wont boot up , and you will have to flash back to GB using Odin then.
I am making a fixed version now. Please wait for it.
Cheers , fixed version of 1.7 uploaded and added to OP. Let the download begin.
Re: [JB 4.2][Kernel] CyanCore-vibrant v1.7
ts1506 said:
Please dont flash the 1.7 version , I messed something up. It wont boot up , and you will have to flash back to GB using Odin then.
I am making a fixed version now. Please wait for it.
Click to expand...
Click to collapse
HaHa we never got gingerbread
Sent from my SGH-T959 using xda app-developers app
1.7 is not in the OP anymore. Was it pulled?
Dougfresh said:
1.7 is not in the OP anymore. Was it pulled?
Click to expand...
Click to collapse
I removed the 1.7 version cause WiFi wasnt working for some reason.
I am working on it.
When I have an incoming call on 1.5 the screen won't turn on and neither will the key lights... On the latest CM10.1 nightly.
Re: [JB 4.2][Kernel] CyanCore-vibrant v1.7
gunks said:
When I have an incoming call on 1.5 the screen won't turn on and neither will the key lights... On the latest CM10.1 nightly.
Click to expand...
Click to collapse
I believe those were to be fixed in the 1.7 update. But it has a problem and he's having to recompile it
Sent from my SGH-T959 using xda app-developers app
gunks said:
When I have an incoming call on 1.5 the screen won't turn on and neither will the key lights... On the latest CM10.1 nightly.
Click to expand...
Click to collapse
That isnt normal , no matter which version. I dont have a vibrant , so cant test , but it definitely doesnt occur is SGS
Re: [JB 4.2][Kernel] CyanCore-vibrant v1.7
ts1506 said:
That isnt normal , no matter which version. I dont have a vibrant , so cant test , but it definitely doesnt occur is SGS
Click to expand...
Click to collapse
Well it is the first build its gonna have some pro ms. Although nobody else seems to be having that problem
Sent from my SGH-T959 using xda app-developers app
Re: [JB 4.2][Kernel] CyanCore-vibrant v1.7
I saw that the i9000 got the 1.8 version. Getting ready to port your newest build and wondering if it was ready
Sent from my SGH-T959 using xda app-developers app
1.8 uploaded , fixes all Wifi issues , linux kernel updated to 3.0.69 and has conservative fixed , courtesy stratosk and semaphore
have flash your ROM 1.8 for i9000 to my vibrant， very smooth，very fast
I have issue via GPS . If GPS lock satellite, it don't open GPS agian . On the latest CM10.1 nightly. KB5
BLN not work . i use semaphore control an click BLN still not work .
CWM 6.0.2.9 on semaphore but this kernel just have CWM 6.0.2.7
CyanCore 2.1 Uploaded , minor changes
Updated Linux Kernel to 3.0.70 , removed Zen due to low performance and made a few more changes.
Captivate and Vibrant coming soon.
This one is still compiled with Linaro GCC 4.7.3 and not 4.8, I forgot to update the toolchain , but next version will be compiled with 4.8
Re: [JB 4.2][Kernel] CyanCore-vibrant v2.1
Heey when are you planning on adding the 1.4ghz normal oc
Sent from my SGH-T959 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VIKINGS KERNEL FOR SPROUT NOW SUPPORTS ANDROID MARSHMALLOW!
Vikings Kernel is based on Google's latest kernel source. It has a lot better performance, battery backup and stability compared to the stock kernel. Works with both lollipop and marshmallow. It also posseses a lot of features which are not in the stock kernel.
Download HERE!
Do not mirror the link!
Version 1.0 :-
-Supports Lollipop And Marshmallow both!
-UBERTC 5.2
-Mako Hotplug
-Governors :- zzmove, interactive, hybrid, powersave, hotplug, performance, pegasusq, interactiveplus, conservative, ondemand, userspace
-I/O Schedulers :- noop, deadline, cfq, bfq, sio, zen, vr, fifo
-Wake Controls :- Double Tap to wake, Sweep to wake, Sweep to sleep
-ThunderQuake Engine 1.0 - Vibration Intensity Controller for MTK vibrators
-Dynamic Fsync
-CPU Boost
-Linux version 3.10.90
-Root Supported as permanently made selinux permissive
Version 1.1 :-
-Smartmax governor added
-FIOPS I/O Scheduler added
Version 1.2 :-
-Governors Added :- Alucard and Wheatley
-Some optimisations
Version 2.0 :-
-Darkness Governor added!
-ROW and TRIPNDROID I/O Schedulers added!
-A lot of hotplugs added. Intelli-Plug, MSM Zen Decision, AutoSMP, and as you know Mako Hotplug was already there!
-init.d support
As a lot of stuff is added so I bumped the version to 2.0!
Version 2.1 :-
-Toolchain changed to Sabermod 6.0!! Immense Smoothness!!
-Removed Smartmax Governor as it gave a reboot whenever used.
-Removed Intelli-Plug (Gives Deep-Sleep Issues) and Mako Hotplug (Too Old). Now the hotplugs are ZEN DECISION and AUTO SMP!
-A lot of optimizations done!
Version 2.2 :-
- Pocket Mod added! (All credits go to @Agaphetos for that)
-Enabled Kernel Sampage Merging!
Version 2.3 :-
-Added Blu_Active and ElementalX governors!
Version 2.4 :-
-Removed Blu_Active and ElementalX as they gave me werd errors this time.
-Now UBERTC 6.0 toolchain, sabermod had some problems with some of my other works.
-Gobla gestures added now! Thanks to @Teloon
-Removed Mako Hotplug to check if it is giving the freezing issue.
Version 2.5 :-
-F2FS support added!
-Gobla should work fine now.
-Linux Version upstreamed to 3.10.92!
-From now on Aroma Installer!! Thanks to @Teloon
Source https://github.com/vikrant699/Dolan_Sprout
The kernel was updated after adding features from the major Thunderzap Kernel update and released with a new name. The thread is HERE.
Credits :- All those whose commits I have used, @varun.chitre15, authors of various governors and I/O schedulers, @Agaphetos, @akhilnarang, @Swapnil Solanki, @pranav03, @thewisenerd
Version Information
Status: Stable
Current Stable Version: 2.5
Stable Release Date: 2015-11-15
D2w s2w ?
Good Job @vikrantarya1 bro!! Keep it up.
alyxumair said:
D2w s2w ?
Click to expand...
Click to collapse
they work
dark_optimistic said:
Good Job @vikrantarya1 bro!! Keep it up.
Click to expand...
Click to collapse
thnx
how to use s2w. ? i already enable and swipe many times on the screen but not waking unlike dtw.
VlNO said:
how to use s2w. ? i already enable and swipe many times on the screen but not waking unlike dtw.
Click to expand...
Click to collapse
kernel adiutor will always give probs with s2w.....use gesture control....and enable only sweep to sleep in it and then it works perfectly
vikrantarya1 said:
kernel adiutor will always give probs with s2w.....use gesture control....and enable only sweep to sleep in it and then it works perfectly
Click to expand...
Click to collapse
what specific application is gesture control? tnx
VlNO said:
what specific application is gesture control? tnx
Click to expand...
Click to collapse
There is an app named Gesture Control
Sry I don't have the link
Its on xda only, try googling it
vikings 2.0
Bro ! Vikings 1.2 Kernel is giving bettery backup than Vikings 2.0
And
Thanks
for
Vikings 1.2
myogesh805 said:
Bro ! Vikings 1.2 Kernel is giving bettery backup than Vikings 2.0
And
Thanks
for
Vikings 1.2
Click to expand...
Click to collapse
for everyone 2.0 is the most stable and best.......just keep conservative governor, switch off two cores, max. frequency keep as 1196 mhz, and noop io scheduler......i got a 7 hr 20 min. of sot with that yesterday on rr 5.5.7
Hi everyone, do i need to wipe anything if i want to flash version 2? I currently have ver 1.0
benjpopfilter said:
Hi everyone, do i need to wipe anything if i want to flash version 2? I currently have ver 1.0
Click to expand...
Click to collapse
No, you don't. Flash away!
Thanks buddy
FREEZE
Nice work ! But after I flash this kernel on my Cherrymobile android ONE , there are times that my phone freezes then restart. I think it happen one or twice a day. Is there any way to fix this?
Hi all, i'm tring to get "double tap to wake" functionality on my nexus 4. My rom is Marshmallow Pure AOSP. I read this kernel has the capability i'm looking for, and is for marshmallow as well. Can i flash it?
Thanks to all
xxalfalfaxx said:
Hi all, i'm tring to get "double tap to wake" functionality on my nexus 4. My rom is Marshmallow Pure AOSP. I read this kernel has the capability i'm looking for, and is for marshmallow as well. Can i flash it?
Thanks to all
Click to expand...
Click to collapse
It is made for Android one devices. Search for a kernal on Nexus 4 thread
I am trying to fix that freezing issue
All i can suggest for now is change the governor
vikrantarya1 said:
I am trying to fix that freezing issue
All i can suggest for now is change the governor
Click to expand...
Click to collapse
then by changing the governor , there will be no freezing issue?
vikrantarya1 said:
I am trying to fix that freezing issue
All i can suggest for now is change the governor
Click to expand...
Click to collapse
which one ??? (for battery)