Database Develop

[Q] Stuck in Boot-Loop (Gingerbread,Juwe'sROM 4.0, CR-Root3.1, ext4)

Hi all,
I upgraded to Gingerbread and Juwe's ROM last night and all went well. That is until today when I ran the script to convert the filesystem to ext4. It rebooted into CWM and all seemed to go well except my phone is now stuck in a boot-loop. It gets as far as the initial "Galaxy S GT-I9000 Samsung" screen and then restarts to it every few seconds.
Background:
I followed the instructions as given in Juwes thread. Initially flashed XWJVB XEE firmware with bootloaders from this thread (this exact firmware I think) with re-partition,etc checked. After that I flashed CF-Root-XW_XEE_JVB-v3.1-CWM3RFS (no-repartition) and flashed ROM. ROM was working perfectly till I ran ext4.
Does anyone know of any way to fix this problem? I can boot into Download mode and CWM Recovery v3.0.0.5. I'm trying to avoid reflashing the ROM but if I can't get a solution soon I guess I'll just have to do that

Hmmm,
Are you able to get into recovery or download mode?
Edit: Just noticed you can.

Another question,
What did you use to convert to ext4?
Did you install Chainfire's ext4 addon?

electrotune1200 said:
Another question,
What did you use to convert to ext4?
Did you install Chainfire's ext4 addon?
Click to expand...
Click to collapse
Ya it's Chainfire's ext4 addon I used. Although it's just occurred to me that I think I used the one packaged with the ROM instead of the newest one from Chainfire's thread. Could it be an older version?

Yeah I really don't know about that. When we get the phone sorted, I would install his most recent addon to see if that's the issue.
As far as I know, you may only have 2 options.
First, you can try to do a factory reset in CWM.
If that fails, I'd start from the beginning, flashing with a 512 pit and re-partion.

electrotune1200 said:
Yeah I really don't know about that. When we get the phone sorted, I would install his most recent addon to see if that's the issue.
As far as I know, you may only have 2 options.
First, you can try to do a factory reset in CWM.
If that fails, I'd start from the beginning, flashing with a 512 pit and re-partion.
Click to expand...
Click to collapse
I was afraid you'd say that. Just got the phone setup as I wanted it
Just tried the factory reset in CWM and no joy. Guess I'll re-partition when I get home. Should probably be doing some work at the moment anyway

Sorry man,
Next time, set everything up after you convert it to ext4. Might save you another headache.
Also, make sure you have some free space on your internal sd card. I try to leave 1.5gb free for file system conversions.
Oh and,
get some work done already

Before you go and flash everything again.
Try flashing Chainfire's 3.1 kernal again. It might pull it out of the boot loop. Worth a shot though before starting all over.
Hopefully it works out for you without starting all over.

I tried reflashing the kernel but no joy. Just went with the complete reflash in the end. Was painless enough because I had everything set up to go from the night before
Thanks for all the help electrotune! Appreciate it

[Q] abnormal error, can anyone help me?

Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.

Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.

hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.

salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.

I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .

I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.

salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2

Erm... help?! (Odin stuck at Nand Write)

Hi all, I could really really use some help.
Today I decided to try and flash CM9 RC2 and I seem to have messed up big time.
I startred by rooting, using Dr Ketan's guide. That all went smoothly, and root was working.
I put the CM9 zip file on the SD card, turned off my phone, got back into CWM recovery, and most tutorials recommended, selected full data wipe... this is where something seemed to go wrong. While perfoming the data wipe, it seemed to freeze. I let it sit for a while, hoping it would sort itself out, but it didn't, and then it rebooted itself and went into a boot loop.
I can't get back into recovery mode, but I can get into download mode. So I thought the best thing to do would be to flash a stock firmware using odin.
I downloaded the latest german LRG firmware (which I was on before I started) from Sammobile, connected my phone to odin, selected the MD5 file, and pushed start. Again, this is where I got stuck. It just hangs on Nand write start. I've tried this twice now, and it gets stuck at the same stage (about 90% finished)
I have no idea what to do now and really need help. I'm not a total n00b, or at least I thought I wasn't, but I seem to have gotten in way over my head. What should I do?

Edit: see you tried already...
Sent from my GT-N7000 using xda app-developers app

This is classical case of super brick.
You should not hav to wipe on ics. I think u must be on stock kernel. Every corner you may see warning, wiping and reset on ics can brick device, but its unfortunate you didn't notice it.
Anyway check your flash counter is zero and send it to service.centre to claim ur warranty.
If u running out of warranty, fing.a link for 'how to revice bricked note from my signature. And try it.
Edit : i wud like to know, as you said u went to cwm recovery, so at the time of wiping you wr on which kernel?
Sent from my GT-N7000 using xda premium

purple zebra said:
Hi all, I could really really use some help.
Today I decided to try and flash CM9 RC2 and I seem to have messed up big time.
I startred by rooting, using Dr Ketan's guide. That all went smoothly, and root was working.
I put the CM9 zip file on the SD card, turned off my phone, got back into CWM recovery, and most tutorials recommended, selected full data wipe... this is where something seemed to go wrong. While perfoming the data wipe, it seemed to freeze. I let it sit for a while, hoping it would sort itself out, but it didn't, and then it rebooted itself and went into a boot loop.
I can't get back into recovery mode, but I can get into download mode. So I thought the best thing to do would be to flash a stock firmware using odin.
I downloaded the latest german LRG firmware (which I was on before I started) from Sammobile, connected my phone to odin, selected the MD5 file, and pushed start. Again, this is where I got stuck. It just hangs on Nand write start. I've tried this twice now, and it gets stuck at the same stage (about 90% finished)
I have no idea what to do now and really need help. I'm not a total n00b, or at least I thought I wasn't, but I seem to have gotten in way over my head. What should I do?
Click to expand...
Click to collapse
Hi Bud,
From your predicament, first let me tell you what you have done wrong.... You mentioned you're in LRG Rom already and you wanted to flash CM9 after that.... right?
Well, I guess the process you did was totally wrong. You have to download stock GB N7000(from Dr. Ketan's thread) and using that stock GB Rom, that is the time you can install AbysNote kernel to root and install CWM on your phone. Now after that, download mobile ODIN (from google playstore) and flash the CM9 from there.
THAT's the one you should have done before. Remember, there are no easy way of jumping ROMS especially if your already in ICS... IF YOU WANT TO FLASH TO ANOTHER ICS ROM.
My rule of law would be to downgrade first to STOCK GB and from there, ROOT, install CWM and mobile ODIN and that'll be the time you can flash already to the new ICS ROM of your choice.
So here's what your going to do. Since your still able to boot in download mode, Download any stock GB ROM and flash it using PC ODIN. After that, seee if you can bootup your Note already to STOCK GB ROM. If and If you are able to already, then download a clean kernel preferably Abyss Kernel and flash it with your STOCK GB so that you can gain root and have CWM installed. From there, download Mobile Odin pro and flash the CM9 (that you ultimately want to be installed on your Note)
Hope everything's going to be fine and Good luck bud! :fingers-crossed:
Cheers!

Hello, I know its been several days, but I just wanted to update on the situation.
Thank you SO much to Dr.Ketan for pointing me in the right direction. A combination of these 2 guides (http://forum.xda-developers.com/showthread.php?t=1661590&page=2 http://forum.xda-developers.com/showthread.php?t=1667886) has managed to help me repartition my internal memory and get up and running again. I've got a stock gingerbread rom running, and all seems to be well.
I realise I was very stupid to do a wipe on an ICS kernal. I read about the problem for 1 particular Kernal back in may, and hadn't read the updates since, and so didn't realise it effected EVERY ICS kernal since then. It's my own stupid fault for not re-reading the warnings. Let this be a lesson kiddies, a little bit of knowledge is a dangerous thing.
Again, thank you so much for the help, to all involved, you are an asset to the community!

Help, phone only booting to recovery

Hi I was running Helly Bean and I was experiencing some lag that i couldnt fix so i decided it was time to start fresh (phone was getting to be a mess anyways) so i formatted my phone and one-click to a stock rom. (rogers i896 2.3.3 with bootloader). I used heimdell to flash kernel with recovery, then flashed devil kernel, reboot recovery, then flashed helly bean as per thread instruction and my phone kept booting into recovery only. So i tried to start over 2 more times with the same results, I even tried to flash CM9 stable release and it yielded the same results.
Can anyone shed some light as to what i messed up? My only option now is to use stock app since i cant seem to get anything else to work...(pleas dont make me go back to touchwiz)
Any help is appreciated,
Thanks.
PS phone works fine on stock rom

This happened to me once... I think it has to do with repartitioning and Devil kernel. If you flash devil first, it seems that something is telling the CM installer that the partitions are all good to go, even though it is clearly not the case. So use heimdall to flash the first kernel, and go straight to the ROM install, making sure to flash the ROM a second time after it reboots into the new recovery.

korockinout13 said:
This happened to me once... I think it has to do with repartitioning and Devil kernel. If you flash devil first, it seems that something is telling the CM installer that the partitions are all good to go, even though it is clearly not the case. So use heimdall to flash the first kernel, and go straight to the ROM install, making sure to flash the ROM a second time after it reboots into the new recovery.
Click to expand...
Click to collapse
Thanks, works first time!!! Looks like im going to have IMEI problems but thats another battle lol

odin to stock 2.3.6, charge to 100%, then go to recovery, 4w, 2f, then install helly bean.

just went thru this last week.... accidentally flashed incorrect ROM to Captivate and phone started acting wiered.
Then came to know i have the wrong bootloaders and kernel. Just installed GB bootloaders and phone started booting to recovery.
then tried to flash ics rom and soft bricked my phone.
Used the "hold both volume buttons and plugin the USB cable to computer" to get into download. then ODIN to stock GB. then used KKroot and then flashed Slim ICS. Now the phone works great.

Bricked I9000, but have download mode. It got trickier than I thought.

Hi,
I think I bricked my phone very well. I used Odin to put some GB Kernel in order to be able to upgrade to JB. Later I got into recovery mode and cleaned cache and many other things, but was unable to wipe data\factory reset, from there it all went down. I tried fixing it using this guide, but it didn't help. I still can get into download mode, though. And sometimes even into recovery, but it gives me tones of errors.
What can I do? How do I fix it now???
Thanks in advance!

Fix:
Try to flash a stock GB rom with Odin.
Kernel/ Upgrade to JB
After that flash a rooted kernel. Try CF-Root or Semaphore Kernel.

pila405 said:
Hi,
I think I bricked my phone very well. I used Odin to put some GB Kernel in order to be able to upgrade to JB. Later I got into recovery mode and cleaned cache and many other things, but was unable to wipe data\factory reset, from there it all went down. I tried fixing it using this guide, but it didn't help. I still can get into download mode, though. And sometimes even into recovery, but it gives me tones of errors.
What can I do? How do I fix it now???
Thanks in advance!
Click to expand...
Click to collapse
flash rom first, find ur own firmware, then flash rom using odin, if ur pet kernel first, there will be no rom to reset.
Sent from my GT-I9000 using xda premium

I indeed flashed stock GB, and managed to update to JB from there
Thank you very much guys!

pila405 said:
I indeed flashed stock GB, and managed to update to JB from there
Thank you very much guys!
Click to expand...
Click to collapse
Press the thanks button if someone helped you

Hi,
got one problem. hope im typing in right section.
Flashed my I9000 to 2.3.6 JVU plus CF-Root. Minutes later ive tried to flash Gamerzrom via CWM.
(done a full wipe / factory reset, wiped caches etc.).
After that Phone reboots and is stuck in a bootloop containing the Semaphore screen and i cannot
enter CWM again. I have to reinstall stock rom first and then root it again.
Dunno what im doing wrong at that point; am i using wrong kernel?
thanks in advance

that gamerzrom...2.3 or 4.2?
if u wanna flash to 4.x, need to flash cm9 first.flash twice, from 2.3 to cm9 to cm10.dont do shortcut please...
cm9 need to flash twice, bootloop will occur on first flash,use 3 button combo to go back to recovery,its da matter of releasing da 3 button,release it rite after u see da white sgs,if still cant, flash back firmware n redo step.
after flashing cm9, do not reboot,flash cm10 or gamerzrom,first flash will error,flash it back again n then reboot, do wipe everything except sd when in 2.3, and please...read first before asking