Database Develop

Ics/gb dont wanna kill wifes note!!

Hello forum, well the wife at the moment is on gingerbread, but she was on ics which i put back to gb using pc odin..
We also have the thing with brickbug too
We want to go to a ics custom rom instead of ics stock we had originally....
Are all ics kernals with the bug or is it just stock kernal???
Correct way to clear old stuff on phone? I did clear phone using mount/storage area (was this okay???)
Thank you for any help!!!
-GARY
Sent from my GT-N7000 using xda premium

It's only the stock kernel which has this brick bug, if you flash a safe kernel you will be fine and can safely do a full wipe.
I would recommend trying cleanote rom and kernel its very smooth and fast and stable and is close to stock.
Start by upgrading to ics again and then flashing speedmod kernel in odin
Sent from my GT-N7000 using Tapatalk 2

Eventhough the brick bug scripts are disabled in many kernels it would be preferably safe to always flash abyss kernel 4.2 before a wipe. You have nothing to lose spending a few minutes more. So time to time before switching between roms and doing wipes think and re-think. be safe. :angel:

(help) Restoring stock rom

hey guys
i hope ya all doin fine
anyway i had a stock ics 4.0.4 with v7 kernel by gavin many thanks to him for his work anyway
what i done went to recovery then did a back up to my sd card the back was al most 3 gb so i flashed gb then flashed paraniod rom
so now i wanna get back to my back that i did with stock ics what is the best way to restore it without gettin bricked like what kernel should i flash and step by step
thank you all have a nice day

dannycanrock said:
hey guys
i hope ya all doin fine
anyway i had a stock ics 4.0.4 with v7 kernel by gavin many thanks to him for his work anyway
what i done went to recovery then did a back up to my sd card the back was al most 3 gb so i flashed gb then flashed paraniod rom
so now i wanna get back to my back that i did with stock ics what is the best way to restore it without gettin bricked like what kernel should i flash and step by step
thank you all have a nice day
Click to expand...
Click to collapse
boot into recovery
Flash jbroid kernel cleaner
Flash abyss in recovery.
Reboot recovery
All 3 wipes
Restore it.
Restrart.
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
boot into recovery
Flash jbroid kernel cleaner
Flash abyss in recovery.
Reboot recovery
All 3 wipes
Restore it.
Restrart.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
another qus will it get back the same as i left it with apps and with v7 kernel that i flashed and everything ?
is there any chance of brick

dannycanrock said:
another qus will it get back the same as i left it with apps and with v7 kernel that i flashed and everything ?
is there any chance of brick
Click to expand...
Click to collapse
Yes. U ll get everything back along with kernel.
Its a safe method to restore bcoz gb roms are safe one. Abyss use GB kernel. bt brick is never been guaranteed . Just stick wid the instructions and everything will be good..
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
Yes. U ll get everything back along with kernel.
Its a safe method to restore bcoz gb roms are safe one. Abyss use GB kernel. bt brick is never been guaranteed . Just stick wid the instructions and everything will be good..
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
thank you so much man
everything went well i have my ics back the same park i parked my car lol
thank you for your help
btw what is the best rom out there other than paraniod because i found it not a game friendly games some times hangs

dannycanrock said:
thank you so much man
everything went well i have my ics back the same park i parked my car lol
thank you for your help
btw what is the best rom out there other than paraniod because i found it not a game friendly games some times hangs
Click to expand...
Click to collapse
Glad it worked.
Btw im using AOKP MILESTONE 6.
Sent from my GT-N7000 using XDA Premium App

Any special procedures?

Okay so my friend has a Samsung captivate. He is on 2.2 and I would really like to help him root and install cwm and a stable cm9 build. I see a lot of one click methods but I'm not particularly sure which one to use... I have an s3 which to me seemed easier to root and install cwm. All this eclair, froyo, and gb things are hurting my head.And just driving me in circles. But if I had some direction it would be appreciated. I just want to know what I need to do to get ,root,cwm, and cm9 thanks ahead of time!
Sent from my SGH-T999 using Tapatalk 2

MacTheRipperr said:
Okay so my friend has a Samsung captivate. He is on 2.2 and I would really like to help him root and install cwm and a stable cm9 build. I see a lot of one click methods but I'm not particularly sure which one to use... I have an s3 which to me seemed easier to root and install cwm. All this eclair, froyo, and gb things are hurting my head.And just driving me in circles. But if I had some direction it would be appreciated. I just want to know what I need to do to get ,root,cwm, and cm9 thanks ahead of time!
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I don't claim to know everything but I do know this. Being that he is on 2.2 you will have to flash to gingerbread first and make sure whatever you flash has bootloaders included otherwise you will have a bricked phone at some point along your way to CM9.
http://forum.xda-developers.com/showthread.php?t=1300843
Go to that link and it will give you several one click options to get you to a variety of stock GB roms. Also for your intitial root there are several one click applications available that will get you fixed up you should just have to google them.

Yeah I'm used to having to flash new firmware, flashing cwm again then new Rom.that was on my old sensation. But thanks I will tell him to update to gingerbread via kies.then I will flash a custom kernel via Odin then just update to cm9
Sent from my SGH-T999 using Tapatalk 2

Stickies also have some good instructions.

Okay so he just upgraded to 2.3.5 so am I going to need to install boot loader as well? or am I just going to use the one click tool
Sent from my SGH-T999 using Tapatalk 2

If he is on 2.3.5 GB already, root the phone and flash a corn kernel so he will have a working CWM

If he has kk4 gb 2.3.5, then he has the gb bootloaders. So all u need is to flash a kernel with cwm and then the Rom of ur choice copied to ur internal sd and u will be good to go. So see this... http://forum.xda-developers.com/showpost.php?p=19425513&postcount=1
Sent from my SAMSUNG-SGH-I777 using xda premium

So even though they are gingerbread boot loaders, I can still flash an ics Rom?
Sent from my SGH-T999 using Tapatalk 2

^ Yep... And each Rom should have it's own install instructions and requirements in their OP as well.
(hit thx button by accident, but oh well ... )
Sent from my SAMSUNG-SGH-I777 using xda premium

MacTheRipperr said:
So even though they are gingerbread boot loaders, I can still flash an ics Rom?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yes GB bootloaders are the requirement and are even backwards compatible. You should be able to install anything from Eclair to Jelly Bean now without problem. But as the previous response states make sure you follow the directions for whatever rom you are using so you are less likely to run into issues.

Yeah I just ran into problem after problem tonight. Finally got cm9 installed and his imei for changed. I am running into every speed bump possible with this phone
Sent from my SGH-T999 using Tapatalk 2

From Samsung ICS to CM10

Hello,
Right now, my Galaxy Note is running a rooted version Samsung ICS:
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.150N7000XXLPY-CL474507
Build Number: IML74K.XXLPY
I'd like to try CM10, but I've been reading a lot of issues from people flashing ROMs from Samsung ICS. What would be the safest way to install CM10? Should I downgrade to a Samsung Gingerbread ROM first? What procedure would you guys recommend?
Thanks,
Tiago

It is important to downgrade first to samsung stock GB.
http://www.youtube.com/watch?v=JO93XJ2C8pc&feature=plcp
Follow his instructions to a tee and you should be good to go.
The youtube video is courtesy of aphroditelikesme(all credits to the dude, as I constantly subscribed to his youtube videos)
Don't forget to hit the 'Thank's button if I have helped you in some way or the other.

Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?

tiagobt said:
Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?
Click to expand...
Click to collapse
you can flash the pre rooted GB rom by Chainfire...then flash the cf kernel....do a full wipe and then just flash CM10. Find the procedure here:
http://forum.xda-developers.com/showthread.php?t=1331784
Go to section 1.3 and u find the way....hope it helps....:good:

Flash it to stock GB
here's the other link for the video.. again all courtesy to the creator of that video. http://www.youtube.com/watch?v=jr3DDEh8vyc
There's also the links of the ROM (choose checkROM GB or RocketROM) and the kernel you need to download.
Just follow his video bud, (I'm following his video for flashing roms and I never miss going back to this video to downgrade to GB)
Cheers!

I see. So flashing Abyss kernel from Samsung ICS (LPY kernel) using CWM is actually safe? I just want to be sure because I've seen many people advising not to use CWM at all if you are on a Samsung ICS ROM.

abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.

letters_to_cleo said:
abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.
Click to expand...
Click to collapse
OK, I flashed Abyss kernel (worked fine), rebooted recovery, made a full wipe, flashed Rocket ROM and rebooted the system. I see the boot animation, but after that, nothing happens (blank screen). I've waited over 5 minutes, but the ROM doesn't boot. Anything else I can try?

I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
THE ONLY 100% SAFE WAY TO GET RID OF AN INFECTED KERNEL IS TO FLASH TO GB THROUGH PC ODIN!! Why the F*CK does everyone prefer to flash abyss and take that risk...!?
IF!! You're confident that RocketRom flashed correctly, you could probably full wipe (AGAIN) from recovery (you'd be on a safe kernel) and that should solve your problem...
Wait for a 2nd opinion though...

eug3n91 said:
I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
Click to expand...
Click to collapse
Then don't reply, you pud.

Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2

trell959 said:
Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm really impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.

tiagobt said:
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm actually impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.
Click to expand...
Click to collapse
Glad it worked. Going back to GB is just a myth. If you have a safe kernel to flash from, then use it.
Sent from my GT-N7000 using Tapatalk 2

I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app

aurator said:
I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using xda app-developers app

i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?

rraaka said:
i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using XDA Premium HD app

post number 744 CM10 thread official preview
wonder which kernel he used ...

Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6

dmonuk said:
Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6
Click to expand...
Click to collapse
All Samsung apps require touchwiz framework and will not run on cm based roms.
Sent from my GT-N7000 using xda premium

Second attempt at flashing Paranoidandroid rom

So i messed up my phone bad and had to take it for repair.
My flash counter is now at 0 and i'm on 4.0.4 kERNEL VERSION 3.0.15-n7000xxlrk-cl811902 [email protected] #3
build number IMM76D.XXLRK Official roms.
I would like to flash to the paranoid android rom, and would love some help. like should i flash to ginger bread [official or not?] than root than to the paranoid android rom? basically what is the safest way to proceed?
Thanks!

jan-sgs said:
So i messed up my phone bad and had to take it for repair.
My flash counter is now at 0 and i'm on 4.0.4 kERNEL VERSION 3.0.15-n7000xxlrk-cl811902 [email protected] #3
build number IMM76D.XXLRK Official roms.
I would like to flash to the paranoid android rom, and would love some help. like should i flash to ginger bread [official or not?] than root than to the paranoid android rom? basically what is the safest way to proceed?
Thanks!
Click to expand...
Click to collapse
Flash latest Notecore kernel using pc odin, it will root and install cwm recovery as well, once you are on this safe kernel you can flash any custom rom via cwm recovery. No need to flash GB for this.
Note- you have to use triangle away to reset binary count after flashin custom kernel.
You can also follow flashing guide on your selected rom thread after flashin custom kernel.
Sent from my GT-N7000

jeetu1981 said:
Flash latest Notecore kernel using pc odin, it will root and install cwm recovery as well, once you are on this safe kernel you can flash any custom rom via cwm recovery. No need to flash GB for this.
Note- you have to use triangle away to reset binary count after flashin custom kernel.
You can also follow flashing guide on your selected rom thread after flashin custom kernel.
Sent from my GT-N7000
Click to expand...
Click to collapse
very helpful thank you

jan-sgs said:
So i messed up my phone bad and had to take it for repair.
My flash counter is now at 0 and i'm on 4.0.4 kERNEL VERSION 3.0.15-n7000xxlrk-cl811902 [email protected] #3
build number IMM76D.XXLRK Official roms.
I would like to flash to the paranoid android rom, and would love some help. like should i flash to ginger bread [official or not?] than root than to the paranoid android rom? basically what is the safest way to proceed?
Thanks!
Click to expand...
Click to collapse
For a clean install I would recommend you to first downgrade to GB then upgrade to PA. For shortcut use the above method mentioned by jeetu

sahilarora2003 said:
For a clean install I would recommend you to first downgrade to GB then upgrade to PA. For shortcut use the above method mentioned by jeetu
Click to expand...
Click to collapse
after waiting 1 month to have my phone fixed, im not going for the short method. i'll go for the safe method.
Any GB rom will do? and official or not?

jan-sgs said:
after waiting 1 month to have my phone fixed, im not going for the short method. i'll go for the safe method.
Any GB rom will do? and official or not?
Click to expand...
Click to collapse
You can flash stock gb for your region or the pre rooted one, from dr.ketan's thread. Both will work fine.
Sent from my GT-N7000

on PA 1.4 successfully from prerooted GB of Dr Ketan.
do you guys you a different kernel with this?

jan-sgs said:
on PA 1.4 successfully from prerooted GB of Dr Ketan.
do you guys you a different kernel with this?
Click to expand...
Click to collapse
Great! I think you should first try/test built in kernel only.
Sent from my GT-N7000

jan-sgs said:
on PA 1.4 successfully from prerooted GB of Dr Ketan.
do you guys you a different kernel with this?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1789397 ..
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

sahilarora2003 said:
For a clean install I would recommend you to first downgrade to GB then upgrade to PA. For shortcut use the above method mentioned by jeetu
Click to expand...
Click to collapse
There is no difference if you go back to GB or do it from notecore or any safe kernel.
The objective is to perform a Safe Wipe.
Sent from my GT-N7000 using xda app-developers app

praetorius said:
There is no difference if you go back to GB or do it from notecore or any safe kernel.
The objective is to perform a Safe Wipe.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Whenever you change the base like cm9 to ics then it is recommended to flash gb to be safe. But you can use shortcuts too like abyss or direct wipe and flash from cwm. The first way gives you full performance with extra juice. No fcs and sods.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

thanks guys. I am getting some FC but nothing to impeding, im sure it will be fixed with the next realeases