so i was silly enough to brick my phone and unlucky enough to not have access to recovery because software debugging was not enabled, kies wont detect it and 3 button recovery method doesnt work on my phone, its stuck on lockscreen and because i do9nt have warrenty, samsung are gonna charge me 70 quid ,
Any ideas guys how to go about solving this problem ?
Any help is much appriciated ,
thanks
I use Riff Jtag box to rescue my bricked phone successfully.
What's involved with unbricking with JTag box. I'm thinking of purchasing one myself. Do I have to open the phone? Or does it just work over the cable?
Please let me know.
Jordan
i tried to downgrade my Samsung galaxy s i9000 with this guide:
theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/ (copy & paste in the address bar)
but in the middle of the flashing the ezodin just stopped and got stuck (during the file "factoryfs.rfs")
so i have waited something like an hour and a half but it didn't help so i did what my friends told me and shot-off my SGS then when i tried to power it on again it just stayed like it's off- black screen, wont light, wont go either to download or recovery mod
what should i do!?!?!? even when i eject the battery it won't turn on!!
please help me !!! im clueless and my dad will kill me if i'll tell him
please help me!!! im sorry that i kinda spamming this thread nut i must figure it out
Read this thread. Maybe it might help.
yea its bricked too bad.. but dont worry try usb jig(search it here in xda)..i'm sure ur problem will b solved
hard brick
Hello
it looks like you r hard bricked.
your bootloader is toust.
you still can fix it with riff jtag.
look it up
hope it helps.
I also bricked my captivate.
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
xpboy7 said:
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
Click to expand...
Click to collapse
you can get it on amazon or they are very easy to make with basic soldering skills
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!
well hi guys , i'v being like a month struggling to fix my Gnote with every possible way and with every acknowledge i'v learnt in XDA but so far i couldn't even come closer to repair my phone.
well i hard bricked my note (in purpose) so when i take it to samsung service they don't know what i'v done to my phone.
well i thought in malaysia they will accept the international warranty , well i was wrong after i broke the motherboard (software) they told me we can change the motherboard for you but your phone is not (LOCAL) they can't rewrite the bloody Serial number, till now i couldn't figure out what he means by (your phone is not LOCAL).
anyway i took my phone for repair shop to perform the Jtag and after the Jtag succeed i thought everything will be cool but its not , as the Jtag did not fix the Partition of my phone that causing me alooot of issues.
i accepted to repair it like that as i really miss my bloody phone , installed stock GB , ICS and my phone still like before i hard bricked is kinda laggy it turns off by itself , stuck alooot of times i'd to reboot it manually ( long hold power off ) and this thing is annoying me. if i'm in any CM9-10 my phone will function very normal.
my questions are :
1- does the Jtag perform the Re-Partition for my phone ( because of what i saw it doesn't perform it all ).
2- is there anyway to use stock pit file without stuck-ing- in Factory.img in odin.
i'v to use the patched pit file that eats 8GB from my phone and leave it in a messy functionality. (reboot , lags , stucks).
your help will be appreciated
thanks in advance.
for those who's going to ask me what i did to my phone to become like this ( well i don't really remember ) it has being a month.
P.S don't come here and tell me read , look, search , because i'm well known about XDA .
cheers
bump
You don't tell people how to help you or not.. Use the pit file method if that doesn't work and you can not get your mobo replaced either if you pay for it or for free then trash your phone get a new one and move on...
You said you bricked it on purpose and then say we can not ask what you did?...
You make no sense at all and that's why until now you have no answer..
Cheers
Enviado desde mi GT-N7000 usando Tapatalk 2
MOVED TO THE RIGHT PLACE : [ http://forum.xda-developers.com/showthread.php?t=2236601 ]
First, this is the wrong place if you have the i9300. This is for i9305.
It's not cool when this happens. Excactly this happened to my mothers S3 also while it was in her pocket and not being used.
Only thing I could get it into was download mode. Otherwise stuck on Samsung screen. I did'nt try to flash something on it because she was afraid of her warranty.
When she brought it to the store they told her the motherboard needed to be replaced. Was not repairable at all they said. She was not rooted and got it for free.
If you live in EU there is a new law that states that rooting does not void guaranty. They have to proove that it was the root process that caused the brick.
I really hope you'll be able to solve this out!
Cundis said:
First, this is the wrong place if you have the i9300. This is for i9305.
It's not cool when this happens. Excactly this happened to my mothers S3 also while it was in her pocket and not being used.
Only thing I could get it into was download mode. Otherwise stuck on Samsung screen. I did'nt try to flash something on it because she was afraid of her warranty.
When she brought it to the store they told her the motherboard needed to be replaced. Was not repairable at all they said. She was not rooted and got it for free.
If you live in EU there is a new law that states that rooting does not void guaranty. They have to proove that it was the root process that caused the brick.
I really hope you'll be able to solve this out!
Click to expand...
Click to collapse
> hhh my bad,
first thank you for your concondolences , and am afraid this is the only solution, but lets say the motherboard is corrupted or whatever > the whole device even shouldn't power up ... i don't know, i hope there is a solution for this ...