As far as I can tell, to install any ROM with the .35 kernel, I need to install Andro-id V3.3 RC3 first (feel free to correct me if I'm wrong).
I can't seem to manage to do this. I've installed customed roms for this phone before, and before that I installed the update from Wellcom using the stock recovery.
But when I try to install SUT LR 1.8.2 on my computer, it will not install. Either on Windows 7 or Windows 8 (separate partitions)- I get the message "Module C:\Program Files\SUT LR\T appCmdSvr.dll failed to register. HResult-2147010895. Contact your support personnel." I've downloaded the installer a couple of times, and it makes no difference.
Since someone said (in the Andro-id V3.3 RC3 thread) you could rename the .nb0 file to "firmware.nb0" and install with the stock recovery, I put the stock recovery back onto my phone (replacing cwm), and tried this way. But when I do that, I get an error message that the file may be corrupted or something to that effect, and it will not allow me to install it. Again, I've downloaded the Andro-id file several times, so I don't think it's really a corrupted download causing the problem.
Does anyone have an ideas for either of these problems, or whether there is another way for me to get onto the .35 kernel?
OK you can try to register the dll manually by typing
regsvr32 nameofthedll.dll
see more details here at http://geekdrop.com/content/how-to-use-regsvr32-to-register-or-unregister-files-dll-ocx-etc. May be you need to run the installer as administrator.
Or simply go to a winxp machine. You can try to replace the stock recovery with sharp stock recovery here https://www.dropbox.com/s/hdmx6tftmahomu7/Sharp_recovery.img(You'll need to rename it to recovery.img). But this may not work, i have not tried it.
I tried the Sharp recovery image, but it doesn't seem to work.
So far, I've completely failed to get the dll to register manually. I'll need to find another machine somewhere to try to install SUT and try to make it work. [ok, found an XP machine to use, and am happily on to the .35 kernel]
Same
Even I am facing the same issue !!!!
I know using a machine with XP is an option but is there any way around I could use SUT LR on win 7 &/or win 8 ?????
ezio2 said:
Even I am facing the same issue !!!!
I know using a machine with XP is an option but is there any way around I could use SUT LR on win 7 &/or win 8 ?????
Click to expand...
Click to collapse
Im Using win7 x64 with SUTLR 1.82, no problem at all for using it, i do many times flashing withaout any error occure ....
Related
Hi,
I'm getting this issue that other people seem to have got, everyone else seems to just flash an updated WM rom to fix it, but it isnt working. This occurs after the install completes and i reboot.
Rebooting in 3 seconds..
mdp_dma_to_mddi : busy
I have tried RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42. 30_AM_NV_2.04_Ship.exe as well as RUU_Vogue_4350_TELUS_WWE_3.07.661.1_Radio_4350H_3. 41.00_Ship_withPPSTPatch1.20.exe, ive tried flashing just the Bell 3.42.50 radio and i've tried NFSFAN's WM6.5 1.00 FINAL ROM.
All have the same result. with this error
Any ideas?
Are you using haret to boot android? Try the zimage here
Apologies for ignorance, but how do i load this zimage?
The zip file in that link has a .nbh if you just want to install android over the top of WM6, the zimage is for another method that lets you reboot into android leaving WM6 still installed on the phone's internal flash memory. I've never used that method so I won't try and explain it.
Download atools and read the help...
Flashed the NBH and it fixed it, thanks
[edit: fixed the issue - Found a gingerbread Odin that detected the phone when in download mode]
Hi team,
I'm kind of new at this, but feel like I've tried everything.
The situation:
I currently have ICS installed on my Captivate.
I want to revert to gingerbread or froyo or any other rom, but I cant.
Issue:
No version of Odin will recognise my phone when I plug it in.
I can detect it when I do an 'adb devices' command in sdk, and when I mount it via CWM in recovery mode I can access the internal SD, but thats as far as it goes.
I've tried reinstalling the drivers, drivers for similar phone models, reinstalling kies, uninstalling kies, nothing seems to work.
I think part of the issue is that I have a mixture of i9000 and i987 firmware, so none of the drivers will work properly. I cant flash a new kernel because I cant get my computer/odin to recognise the phone. Even when I use mobile Odin it says that its not compatible with the partition on my internal SD.
All I really want to do is revert back to a working version of android, as I'm having a bunch of issues with ICS that I dont want to get in to now. (And for some reason none of the fixes work on this setup)
So I was wondering:
Does anyone know of a way to flash everything back to stock, kernel, rom everything via command prompt or by loading a file onto the phone via CWM bootloader?
Alternatively - is there a way to re-partition the SD so that I can use mobileOdin?
Is there anything else I can try? I have a feeling I've forgotten something obvious...
I've spent the better part of the last 2 days on it, so theres probably info I've forgotten to include.
See attachment for kernel, build etc.
I still have root access at least
I know op have solved it but for them who reading this can do this
flash any gb custom rom from any ics rom but will need to flash the rom two times continuously then it will boot up successfully
and a great rom is in my sig
Not if it is an RFS/EXT2/3/4 ROM... That requires repartitioning which cannot be done coming from MTD to BML (no one has figured it out yet). BML to MTD is possible.
i installed the NAA kernal and CM9, and all going great, i did however realise that i needed to install gaaps, so i placed on card, rebooted into recovery and installed, all going good, and then after bootup where you tap the android man to continue. this is what i get 'UNFORTUNATELY THE SETUP WIZARD HAS STOPPED'..
I cannot bypass this. ive tried installing two different gapps on it, and both times this..
any help would be appreciated
russy23 said:
i installed the NAA kernal and CM9, and all going great, i did however realise that i needed to install gaaps, so i placed on card, rebooted into recovery and installed, all going good, and then after bootup where you tap the android man to continue. this is what i get 'UNFORTUNATELY THE SETUP WIZARD HAS STOPPED'..
I cannot bypass this. ive tried installing two different gapps on it, and both times this..
any help would be appreciated
Click to expand...
Click to collapse
woow
what do you mean with stop??
maybe you try it again
flash the kernel
backup
factory reset etc
Flash ROM
Flash gaaps
done!
try to clear dalvik cache from cwm -> advanced
Hello guys!
I'm new to the forum, and a total noob when it comes to android. I have a VERY similar problemToday I installed the latest version of CM. Worked fine. I installed gapps. Now when I turn on the device, it just shoes the message and I can't do anything. I wanted to try reflashing a newer version of gapps, but I can't put it on my sd card, because my computer won't detect it anymore...I can't use my phone at all, I am starting to panic :/
cassiopee5 said:
Hello guys!
I'm new to the forum, and a total noob when it comes to android. I have a VERY similar problemToday I installed the latest version of CM. Worked fine. I installed gapps. Now when I turn on the device, it just shoes the message and I can't do anything. I wanted to try reflashing a newer version of gapps, but I can't put it on my sd card, because my computer won't detect it anymore...I can't use my phone at all, I am starting to panic :/
Click to expand...
Click to collapse
Get a card reader
wanna thank xda? here
unzip the rom with winrar you leave two folders that enters the system says and go to the folder that says-app-here clears-app-setup wizard again after that compress the two files that were decompressed - metainf--system-with-winrar-do not forget to put format .zip and you have the zip file to your sd put it, install it normally..
Unfortunately the message has stopped the setup wizard should no longer appear
sorry my bad English
Wizardloop
yeah i got almost the same problem but with few key differences:
i pimped up my android with pimp my rom, the system ui stopped unexpectetly and when i factory reset my phone i got stuck in so-called
wizardloop. so now i want to re-download my stock rom but i dont know any tools that helps me.kdz is for lg only and flashtool is for xperia.
i have prestigio 4055 usb driver.
so can anyone give me some advice? It will be highly appriciated.
maybe reflash kernel and after instal rom, maybe help to you problem.
When I first got my 2X I rooted my phone and loaded in clockworkmod via the NVFlash method.
However it has never worked properly for me.
Occasionally it would let me install a kernel, it would never let me install a new ROM. It rarely would let me make a backup or restore.
Most of the time it would say, E: Can't open /sdcard/<insert file name here>.zip (bad) despite the fact I could open that archive very easily on my computer.
When checking the files on my sd card on my computer I will often get the message "please insert the last disk of the Multi-volume set and click OK to continue."
As you might expect, the latest attempt at flashing a ROM didn''t work, and now I can't get back to one of my few backups either. I can get into ClockWorkMod, but of course no matter what ROM I try they don't load. The chap who put up the stock roms should probably find another host, one that doesn't stop after 168MB and then tell you you've had your downloads for the day.
Running ClockWorkMod 5.8 (the touch version, I assumed since it was paid it would work better than the free version *you can laugh if you like*)
Any ideas, or should I dump the phone and get that Galaxy Nexus I've had my eye on for a while?
I extracted and rezipped the CM 7.2 files and this time it loaded.
Hope this works.
Change CWM version there is a free one zip flasheable in dev section. The 5.8 touch recovery never worked for me.
Not a lot of roms work with touch cwm. Next time I suggest reading facts instead of assuming
Sent from O2X via xda premium, beware of autocorrection
I have Temasek's ROM with the Symbi0sis kernel running now, nice and smooth.
It's not just the touch CWM, I was having problems with the normal one too.
Okay, after reinstalling I'm on 5.0.2 CWM with the normal up and down on the volume keys.
Now my phone keeps getting a driver error when I link it up to the computer.
Latest LG drivers, nothing.
Hello,
I think I've messed up my MI3 a bit to much.
After trying out 15+ ROMs, partitioning with several methods,
swapping CWM & TWRP just to see what will happen,
my MI3 finally "gave the ghost" as we say in good dutch.
I have some idea of what's wrong, but haven't the ghusto to sort it out any more.
Most probable is a few wrong partion sizes allowing me only
to install the last working recovery (CWM).
Anyway, to cut a long story short,
is there any way to COMPLETELY do an original factory reset,
including removing all partions and creating new ones with the right sizes
with an original (MIUI ?) factory ROM installation ?
Alternative ideas are welcome.
Yes, (I think) flashing the original ROM, MIUI, it will restore everything to factory (including the kernel, partitions, etc). Using the official tool is the easiest way http://en.miui.com/thread-92720-1-1.html
ChazyTheBest said:
Yes, (I think) flashing the original ROM, MIUI, it will restore everything to factory (including the kernel, partitions, etc). Using the official tool is the easiest way http://en.miui.com/thread-92720-1-1.html
Click to expand...
Click to collapse
Thanks Chazy,
but .. been there ... done that ... phone not recognised
Inonotting said:
Thanks Chazy,
but .. been there ... done that ... phone not recognised
Click to expand...
Click to collapse
Did you try connecting your phone in fastboot mode? It starts a window where you can flash the latest stable or developer rom.
I just did it and my phone is restored to factory, everything working. It should work, no matter what genocide you did to your phone lol :laugh:
I tried fastboot already, had some errors.
Can't seem to find any fastboot roms anymore, I only have
cancro_images_V6.1.2.0.KXDCNBJ_4.4_cn_2cbb2e76e8.tgz
I'll try again sometime this week.
I seem to recall that fastboot had some problems with my partitioning also.
You mean errors while flashing with fastboot? It should fix the partitions... I flashed the zip to extend to 1.2GB and installed the cm12.1 with stuxnet kernel but it seems there are some problems and it's not booting. So I used the mi manager, connected the usb in fastboot mode and it reverted and installed miui room without errors.
Try the developer room, if you have problems downloading it (with the mi manager, they're having server problems) go to the folder where it downloads (C:\Xiaomi\... can't remember) and open the .cfg file (using notepad) and copy the url link and open it in firefox or chrome, it should download the file at full speed. Delete the two files in the folder and move from downloads the new file. Disconnect the phone and connected it again in fastboot mode, choose the developer room and it should flash it, fixing partitions. (ram usage is a bit improved since the other old stable, getting 1.1/1.2GB uninstalling crapware and system apps like ant hal service, etc)
I'm using the last developer room and there are no problems, everything smooth, stable and good performance (with a new cool interface and themes). Still waiting for 5.1.1 though
Nope, just a message,
"Can not install" or something like that, no explanation
Inonotting said:
Nope, just a message,
"Can not install" or something like that, no explanation
Click to expand...
Click to collapse
Solved :
forum.xda-developers.com/xiaomi-mi-3/general/mi3-bricked-t3195574
I used The Dork Knight Rises' partitioning method, back to stock, then back to extended :
forum.xda-developers.com/xiaomi-mi-3/general/extremely-useful-flashable-zips-t3080860/