Hello guys,
I have a motorola milestone from Brazil, and I used to have a chip from TIM working normally (at 1800 Mhz band). Until then, I was on cyanogenmod 7 but it was to laggy, then I tried to install Telus lite 5.2 rom (eclair). Till then, I can´t get anymore my chip from TIM working again. I put other chips (CLARO), and they work normally. I changed from androidani menu the baseband and tried others baseband fixers. I recover my nandroid backup and the problem remains. In fact, my question is: Is it a problem with my phone or with the operator? May I be blocked or something, once it says that this operator is unavailable, when I try to set manually from settings menu? Every other things on my phone are working perfectly, like wifi, gps, but with this operator, I can´t get registered. Anyone could, please, explain what could be happening?
Is it a technical problem, I see now that TIM (1800) or CLARO (900/1800) so maybe its working only at 900 band.. Is it possible or it´s a block from operator?
Thanks in advance for reading and awaiting a possible answer!!
Someone please give me a light!! Anticipated thankssss
Sent from my GT-N7000 using xda premium
At this point I if I were you I'd go into recovery wipe data, wipe cache, do a factory reset, and then flash back to the stock factory image.
I tried already shimp208. I deleted everything, all 3 wipes, but I´m not getting to connect with RSD-lite. When I put in download mode, it appears as SF flash OMAP 3040 and I get flash bootloader, but the sbf files from stock rom from Brazil I didn´t get, cause the button "start" appears gray. When with the phone turned on, I can get MTP driver from motorola, so I thing it´s not being recognized by RSD-lite. Any other suggestion?? Pleasseeee?? Thanks in advance!!!
JuninhoCelular said:
I tried already shimp208. I deleted everything, all 3 wipes, but I´m not getting to connect with RSD-lite. When I put in download mode, it appears as SF flash OMAP 3040 and I get flash bootloader, but the sbf files from stock rom from Brazil I didn´t get, cause the button "start" appears gray. When with the phone turned on, I can get MTP driver from motorola, so I thing it´s not being recognized by RSD-lite. Any other suggestion?? Pleasseeee?? Thanks in advance!!!
Click to expand...
Click to collapse
Are you falshing the SBF on windows or linux? I'd try using linux if your currently using Windows and see if that helps at all. Sometimes SBF on windows can be quite stubborn.
Edit:
Just stumbled across this that might help:
http://www.droidforums.net/forum/dr...-solution-your-windows-rsd-lite-problems.html
Sent from my SCH-I535 using xda premium
shimp208 said:
Are you falshing the SBF on windows or linux? I'd try using linux if your currently using Windows and see if that helps at all. Sometimes SBF on windows can be quite stubborn.
Edit:
Just stumbled across this that might help:
http://www.droidforums.net/forum/dr...-solution-your-windows-rsd-lite-problems.html
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I made it shimp, through windows.. I installed sbf from stock thank God, but, anyway, Im only working at 900 gsm band, I suppose. I would glad to know if its an issue from my phone that get locked to this baseband (900) or if it was blocked by operators to work with their bands (850 and 1800).. Do u know if there's some zip to get radio reinstalled or something? Thanks in advance!
Sent from my GT-N7000 using xda premium
JuninhoCelular said:
I made it shimp, through windows.. I installed sbf from stock thank God, but, anyway, Im only working at 900 gsm band, I suppose. I would glad to know if its an issue from my phone that get locked to this baseband (900) or if it was blocked by operators to work with their bands (850 and 1800).. Do u know if there's some zip to get radio reinstalled or something? Thanks in advance!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Ok after some more hunting around I seem to have found something that could help
http://sbf.droid-developers.org/umt...0R_USASHLSTIMBRLAT_P039_A021_HWp2a_1FF.sbf.gz
Sent from my SCH-I535 using xda premium
shimp208 said:
Ok after some more hunting around I seem to have found something that could help
http://sbf.droid-developers.org/umt...0R_USASHLSTIMBRLAT_P039_A021_HWp2a_1FF.sbf.gz
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I'm downloading.. Do u think it could fix something on radio? After installing I'll report my experience.. Thanks for your efforts!
Sent from my GT-N7000 using xda premium
JuninhoCelular said:
I'm downloading.. Do u think it could fix something on radio? After installing I'll report my experience.. Thanks for your efforts!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yup definitely think it could fix your radio problem because its a factory image wich should contain the appropriate baseband radio's to fix your problem. But like you said let me know how it goes.
Sent from my SCH-I535 using xda premium
I didn't get to install yet... It gives fail.. But I know how to fix (I guess) , but I need time.. Will try weekend.. Thanks A LOT for your support
Sent from my GT-N7000 using xda premium
Let me know if your successful I may have another idea if your still stuck.
Sent from my SCH-I535 using xda premium
I'm installing right now.. Not sure if will get this sbf installed... Windows sucks.. Thanks for your support!!
Edited: I´m getting RSD recognize but it keeps erasing flashing memory and don´t continue. Then I have to take off battery and the phone boots normally, but without the new sbf.. And baseband is not working the same way..:/ Thanks for attention!!!
Sent from my GT-N7000 using xda premium
I did with another version of TIM sbf (a newer, I guess), then it started ok with the new rom, but it still don´t get registered on TIM network.. :sad .. Thanks for attention!!
Editted: I tried to find network but it keeps "eternally" trying to register and nothing..
JuninhoCelular said:
I did with another version of TIM sbf (a newer, I guess), then it started ok with the new rom, but it still don´t get registered on TIM network.. :sad .. Thanks for attention!!
Editted: I tried to find network but it keeps "eternally" trying to register and nothing..
Click to expand...
Click to collapse
Hmm maybe you could try extracting just the baseband from the ROM and flashing that to see if that had any effect
Sent from my SCH-I535 using xda premium
shimp208 said:
Hmm maybe you could try extracting just the baseband from the ROM and flashing that to see if that had any effect
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Well.. Unfortunately I don't know how to do it.. Do u mind to explain? Or point me some link where I can extract this from a sbf file? Thanks man! ¡!
Edited.: do u think it could be restored at technical support? Or doing all this stuff I've been doing is what support would do? Could this be a block from network maybe? I'm getting nuts.. Cause my phone works perfectly at 900 Mhz band, but not anymore at others..
Sent from my GT-N7000 using xda premium
JuninhoCelular said:
Well.. Unfortunately I don't know how to do it.. Do u mind to explain? Or point me some link where I can extract this from a sbf file? Thanks man! ¡!
Edited.: do u think it could be restored at technical support? Or doing all this stuff I've been doing is what support would do? Could this be a block from network maybe? I'm getting nuts.. Cause my phone works perfectly at 900 Mhz band, but not anymore at others..
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
So the more I think about the more I think I might have an better idea of what to do. You said you tried the other SBF and it started ok but didn't get registered on the network so that leads me to believe it defiantly related to carrier network operation not the phone hardware being defective. It's possible that when you switched SIM cards that it did trigger a network block from the other carrier and that is is locking you out even though you switched back. I would recommend taking a look at these links for to unlock the SIM:
How to Unlock Motorola & enter Subsidy code instantly / Remove "SIM Network Unlock"
http://sim-unlock.net/sim-lock/75/Unlock_for_any_New_Motorola_Defy_Flipout_Milestone/
If that doesn't fix it then you could take it to technical support and explain the situation to them, and perhaps they can re-setup your phone to work with their network.
Well... I guess it´s not my problem, cause it doesn´t ask for any unlock code.. After all this, I suppose that or technical support as you said, or maybe carriers have locked my phone by imei, and it happened after I installed Telus lite v5.2....On that thread, it said that was take off some frequencies to get more lite as possible, but if wanted could be replaced the other frequencies with a zip.. but it never worked.. .. The strange part is that one of them is ok.. And it´s from 900 Mhz frequency.. I´ll try technical support at first.. Thank you so much shimp, for all your patience and support.. I´ll let you know if I get it working again.. Bye for now!!
JuninhoCelular said:
Well... I guess it´s not my problem, cause it doesn´t ask for any unlock code.. After all this, I suppose that or technical support as you said, or maybe carriers have locked my phone by imei, and it happened after I installed Telus lite v5.2....On that thread, it said that was take off some frequencies to get more lite as possible, but if wanted could be replaced the other frequencies with a zip.. but it never worked.. .. The strange part is that one of them is ok.. And it´s from 900 Mhz frequency.. I´ll try technical support at first.. Thank you so much shimp, for all your patience and support.. I´ll let you know if I get it working again.. Bye for now!!
Click to expand...
Click to collapse
Always glad to help take care!
Related
download link is http://www.multiupload.com/X558NDM1WO
Tested on my bell atrix
If no signal or unknown baseband is found, just flash to other radio
it wont break the phone unless you have done sth awesome
UPDATE: I am upgrading this radio on top of France Orange 2.1.1
I don't own a ATT Atrix so I am not sure whether it works on ATT Atrix or not
ytwytw said:
download link is http://u.115.com/file/e615oxg1
then click on "电信下载" to start downloading
Tested on my bell atrix
trying to upload the radio file to the forum now... but really slow!
(YES, you know bell DSL sucks)
Click to expand...
Click to collapse
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App
josuetenista said:
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App
Click to expand...
Click to collapse
I believe other radios have been used on the AT&T atrix before, you should be good to use this. If you end up w/o signal just flash SBF and you'll be back to normal.
Sent from my MB860 using XDA Premium App
and what can u say about new radio? is there smth new? smth better?
some att plz test it !!
What's the point of this radio?
Sent from my MB860 using XDA Premium App
frankiedizzle87 said:
What's the point of this radio?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
agurzhiy said:
and what can u say about new radio? is there smth new? smth better?
Click to expand...
Click to collapse
I just flashed yesterday, gonna see how it works (Bell Canada)
The point is to share...
however in China only 2100 band works, so I assuming it works better for Europeans instead of Americans
Let's see...
For a second there I had hope that it would be the same version as the stock Bell radio. (1.77, I had to look it up)
I am guessing that since China has some differences in their mobile networks compared to NA, it might be interesting to see if it improves things over here.
Cheers!
Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0
laitalk said:
Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0
Click to expand...
Click to collapse
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes please, iam be the first ,iam sure we all want to try it
Didn't work for me tried flashing it twice even without the sim and sd inserted. I get no service and the phone menu doesn't allow me to select any bands etc.
Bell device w/ french rom
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes,plz.i'm dying to use it.cuz i'm now living in china,and i uses the att atrix,the baseband don't fit the network.thx.
Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.
frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
from what i can see,
your definition of "benefits" must be very limited. not everyone needs hsupa, i'd live without it if it improves stability.
you have no idea about what ymmv means. with the vast possibilities/combinations of different carriers/terrains/vendors/gen of devices, why would you even ask about the "benefits"? chances are someone would benefit from it but just not you.
racca said:
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.
Click to expand...
Click to collapse
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.
Whipon said:
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.
Click to expand...
Click to collapse
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat
lanyao1920 said:
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat
Click to expand...
Click to collapse
what exactly do you think this baseband is gonna do to an at&t sku?
you'd most likely go from "loss signal and too much heat" to no signal at all.
i suppose you can just turn on flight mode if you want it so bad.
ytwytw said:
so I assuming it works better for Europeans instead of Americans
Let's see...
Click to expand...
Click to collapse
we have 900/1800/2100
atrix should launch these days in mid europe, maybe there's a better compability with our radio for switching in baseband...
i got a at&t atrix too, no setting for FU baseband, just the american one... (quadband eh?)
frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Click to expand...
Click to collapse
baseband does seriosly nothing to packetservice?
I flashed to Milky's ROM on i9000m using odin, and it boot looped, so I flashed with Milky's but no modem. And then flashed a modem. it booted but I had no service. I then tried 10 or so stock firmwares, and none did the trick. I finally fix my product code to get Kies to update, and kies updated to the newest gingerbread. But even after that, I still have no service. Does anyone know whats going on? Is the phone ruined?
ANY help would be greatly appreciated, I spent over 48 hours on this already, and I can't do it myself anymore.
Ok, I had this issue with mine, now I semi bricked my i9000 flashing modems to try and fix this issue, but i had to take it to a shop, i saw this on his screen on a Simpley Honey Rom on XDA.
HOW TO CHANGE THE CSC WITH YOUR COUNTRY CODE:
- Into the DIALER write *#272*XXXXXXXXXXXX# where X series is your IMEI (show the IMEI with *#06#)
- Select your country CODE
- Click on INSTALL
- Wait until it reboots and it do a wipe (automatically)
- Do the first boot
- Enjoy!
But find out ure country code first. And do not try this if ure unsure, remember Im saying I saw a guy that owns a Phone repair shop do it with my phone.
bigmadpete said:
Ok, I had this issue with mine, now I semi bricked my i9000 flashing modems to try and fix this issue, but i had to take it to a shop, i saw this on his screen on a Simpley Honey Rom on XDA.
HOW TO CHANGE THE CSC WITH YOUR COUNTRY CODE:
- Into the DIALER write *#272*XXXXXXXXXXXX# where X series is your IMEI (show the IMEI with *#06#)
- Select your country CODE
- Click on INSTALL
- Wait until it reboots and it do a wipe (automatically)
- Do the first boot
- Enjoy!
But find out ure country code first. And do not try this if ure unsure, remember Im saying I saw a guy that owns a Phone repair shop do it with my phone.
Click to expand...
Click to collapse
Thanks for the reply, I actually did that before, and retried it again, and it's still not working. I'm clueless as to what's going on.
Have you checked your apn settings?
Sent from my GT-I9000 using xda premium
slaphead20 said:
Have you checked your apn settings?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
It's not even seeing the sim card though. When I click on Mobile Networks it says Insert "Insert SIM card to access network services".
mxpxboi said:
It's not even seeing the sim card though. When I click on Mobile Networks it says Insert "Insert SIM card to access network services".
Click to expand...
Click to collapse
Have you tried another sim?
Sent from my GT-I9000 using xda premium
slaphead20 said:
Have you tried another sim?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Yeah, I tried like 4 or 5 different ones. AT&T, T-Mobile, Telus, some with active service and some not.
I would take it to service centre maybe, worth asking them,
Sent from my GT-I9000 using xda premium
slaphead20 said:
I would take it to service centre maybe, worth asking them,
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I don't know if we have Samsung service centers in the US, how would I look that up?
http://www.samsung.com/us/support/service/request
So m messing some things up last night with my sprint tab to make it work with an India carrier, and then i clicked "Rebuild" option in DFS Tool after which i'm not able to connect my tab to DFS, CDMA workshop or qpst, whereas everything was working fyn before doing rebuild.
The tab does shop up as diagnostic samsung device, CDMA_WS connects to the port but fails to read anything, everything already set to Modem from ##8778#.
Tried reflashing, downgrading and everything else which i can do.
Any help is very much appreciated.
bump :S??
Sent from my I897 using Tapatalk
bumpppppppppppp
Sent from my I897 using Tapatalk
Very impressed with the level of assistance this gentleman was offered. Kudos.
, bump........
Sent from my I897 using Tapatalk
jewfish said:
Very impressed with the level of assistance this gentleman was offered. Kudos.
Click to expand...
Click to collapse
You can't help him and you are criticizing people who can't either? Shut it!
funkym0nk3y said:
Tried reflashing, downgrading and everything else which i can do.
Click to expand...
Click to collapse
In your list I didn't see reboot recovery factory reset.
What India carrier uses cdma? Sprint tabs cannot run on a GSM network.
tried everything :$
Sent from my I897 using Tapatalk
funkym0nk3y said:
tried everything :$
Sent from my I897 using Tapatalk
Click to expand...
Click to collapse
I have same problem connect mytab to pc it read port 12 but when I open th qpst show it no phone
Any one can help?
I know its a bit late, but if some1 still facing this problem, they can try using the attached Script Manager script to put thr devices into diag mode, this script will work on CM7, props goes to original authors if this works
View attachment DmCm7.txt
Hello, i have a galaxy tab 8.9 SGH I957(LTE AT&T version) with 16gb of memory, so all was working good with the stock firmware (3.2 honeycomb), but i bricked my device. So, i bought on ebay a jtag service, and when i received my tablet back, it was in download mode, and as you know guys, it says the model in the same screen, and say P7320, so, i flashed the tablet with the stock rom ICS for the SGH-I957 that i got from a page,
i did the flash by odin, and then, after finish the process, the tablet was alive, all was working fine, except that the intern memory was just of 127mb, now i dont know what can i do, i read something about the partition table, but i hope that you can help me guys, thanks a lot!!
Flash a 7320 rom and keep it as that. The partition tables got changed when you jtag'd it.
Sent from my SAMSUNG-SGH-I727
jd1639 said:
Flash a 7320 rom and keep it as that. The partition tables got changed when you jtag'd it.
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
What stock rom do you recomend me?, because there are many versions of another countries,but no one of an american.
Alonsonbarrios said:
What stock rom do you recomend me?, because there are many versions of another countries,but no one of an american.
Click to expand...
Click to collapse
There is another user, hondaz50, who had the same issue after jtag. He posted in early April. Look for his post and maybe you can pm him and ask what he did.
Edit: Google "my i957 now a p7320 xda"
Sent from my SAMSUNG-SGH-I727
jd1639 said:
There is another user, hondaz50, who had the same issue after jtag. He posted in early April. Look for his post and maybe you can pm him and ask what he did.
Edit: Google "my i957 now a p7320 xda"
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Ok, im going to try tonigth, im nervous, i just need use the .tar file?, or the pit, and the modem too?
Alonsonbarrios said:
Ok, im going to try tonigth, im nervous, i just need use the .tar file?, or the pit, and the modem too?
Click to expand...
Click to collapse
Just use the tar. Put it in odin PDA. Only have auto reboot and f.reset checked.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
just use the tar. Put it in odin pda. Only have auto reboot and f.reset checked.
Sent from my samsung-sgh-i727 using xda app-developers app
Click to expand...
Click to collapse
thanks, i did the flash yesterday, and now my tablet is working like new, thanks, !!!!!!!
alonsonbarrios said:
thanks, i did the flash yesterday, and now my tablet is working like new, thanks, !!!!!!!
Click to expand...
Click to collapse
i suppose that my tablet has a sex change, because it was an i957 and now is a p7320, lol!!!
Alonsonbarrios said:
i suppose that my tablet has a sex change, because it was an i957 and now is a p7320, lol!!!
Click to expand...
Click to collapse
I'm glad its working for you and everything turned out well.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
I'm glad its working for you and everything turned out well.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
That's in part thanks to you, Thanks!!!:good::good:
Alonsonbarrios said:
That's in part thanks to you, Thanks!!!:good::good:
Click to expand...
Click to collapse
Now i have another problem, my 3g is not working, the stock rom that i use is from Norway (telenor), and the bands that they use for the 3g are 900/2100MHz, but i need the 850 / 1900 bands to make it work in at&t, how can i solve this?, can i flash another modem to back to the 850 / 1900, or make it quad band?
Alonsonbarrios said:
Now i have another problem, my 3g is not working, the stock rom that i use is from Norway (telenor), and the bands that they use for the 3g are 900/2100MHz, but i need the 850 / 1900 bands to make it work in at&t, how can i solve this?, can i flash another modem to back to the 850 / 1900, or make it quad band?
Click to expand...
Click to collapse
That's the same problem the other guy had. You might try to send him a pm and see if he solved it. I'm not aware of any radios that you can flash.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Hi, my friends!
I got a little problem with my 9305. I bought it from the Provider A1 in Austria. First I wanted to let it stock. (I got a SGS2 with custom Rom and a rooted OX4HD)
I was reading in xda about how to SIM unlock my 9305 and so I did it...
I flashed back to 4.1.1 from my Provider using Odin, because it is only possible in this firmware like this http://forum.xda-developers.com/showthread.php?t=2185866
Now it is unlocked... with A1 (the one it came with) the internet connection is still a dream... with 4g I get really fast and H (H+) is also fast (about 14Mbps @ Speed test.net)!
But when I put the "3 AT" SIM in, i'm gettin ill! I also have H (H+ and 3G) but the internet connection sucks with 0.11Mbps in download and 0.14 in upload....
I decided to flash stock DBT (branding free German) firmware from Samsung-updates.com to get it done... NOTHING!
Now I rooted my phone and installed a custom recovery to flash a other Rom...
Currently i'm on Sentinel Rom 4.2.2 with the kernel it came with... and the problem is the same... very bad internet... :thumbdown:
Please, can anybody help me? I already got crank with it...
PS: Sorry about my bad English! I hope you understand what I mean...
Edit: Btw, it's no problem with the SIM-Card! The "3 AT" SIM works perfectly in my 4x HD.
Sent from my rooted LG-P880 using xda developers app
Standard reply .
IMEI correct
Modem correct for network .
CSC likewise .
IMEI is correct. I don't know which modem or csc I got to install... this phone is in Austria only available from A1 and the Operator "3" never had it in the list... Can anybody give me a tip?
Now I have the Sentinel Rom and the Code *#1234# has no function. How can I see the modem and csc I have installed?
In this way I'm kind a noob...! The SGS2 was way easier to check...
Edit: I'm really a noob!!
Baseband-Version is I9305XXBMD5 :banghead: but don't know if it is right for me.
Sent from my LG-P880 using xda app-developers app
See Modem thread .
jje
Ok, i look in the modem thread. Meanwhile I installed "GetRIL" but I think it don't knows my phone. It says RIL not found and in the flip down menu only stand I9300 modems...
Sent from my LG-P880 using xda app-developers app
YEAHHHH!! I solved my network problem!
It was really the wrong Baseband... Now it works like hell!!
Got DXALI7 for "3Austria"
Sent from my GT-I9305 using xda app-developers app
don't forget to thank the ones who helped you by hitting thanks on their posts
Glebun said:
don't forget to thank the ones who helped you by hitting thanks on their posts
Click to expand...
Click to collapse
Oh, sorry! Did it. Thanks for your help!!
Sent from my GT-I9305 using xda app-developers app
Haha that didn't include me, but thanks anyway
Glebun said:
Haha that didn't include me, but thanks anyway
Click to expand...
Click to collapse
No problem! But I got the same problem again... flashed a new modem and after about an hour the internet connection stuck and was slow as a snail...
Flashed other modems and the same... always from beginning to start my phone for about 1 or 2 hours it is normal (up to 20Mbps) (except that I can't load any apps from playstore or either look youtube) and than speedtest.net results are horrible (not more than 0.2Mbps)
Now I'm desperate! I don't know what I can do to get it done... infact the IMEI is right... it is the same as on the package and the same as with *#06#...
Any help would be... helpful!
Any tips... I tried all... all I know and maybe can... I got no clue, what to do...
PLEASE HELP ME... SOMEONE... PLEASE
Edit: The phone works normally... I can make phone calls and write SMS... but only internet is corrupt...
Sent from my LG-P880 using xda app-developers app
try all the modems
Christian1981 said:
No problem! But I got the same problem again... flashed a new modem and after about an hour the internet connection stuck and was slow as a snail...
Flashed other modems and the same... always from beginning to start my phone for about 1 or 2 hours it is normal (up to 20Mbps) (except that I can't load any apps from playstore or either look youtube) and than speedtest.net results are horrible (not more than 0.2Mbps)
Now I'm desperate! I don't know what I can do to get it done... infact the IMEI is right... it is the same as on the package and the same as with *#06#...
Any help would be... helpful!
Any tips... I tried all... all I know and maybe can... I got no clue, what to do...
PLEASE HELP ME... SOMEONE... PLEASE
Edit: The phone works normally... I can make phone calls and write SMS... but only internet is corrupt...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Any chance that the problem is the 3 network actually? How well did you test it with another phone?
Sent from my GT-I9305 using Tapatalk 2
!crazy said:
Any chance that the problem is the 3 network actually? How well did you test it with another phone?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
The same sim in my LG Optimus 4X HD is the internet wonderful. Btw, I now use the 9305 and it seems to be ok... but when I want do download something in Google play or a video on YouTube it's slow like a 56k modem... and the speedtest always shows around 12 Mbps
It seems like my problem is Google related... can this be? On my other phone all works perfectly!
Maybe it helps... when I open dailer and type *#1234# stands:
AP: I9305XXBLL5
CP: I9305XXBLL5
CSC: I9305MOBBLL2
Is it better to flash the stock german firmware? I have no clue...
Sent from my GT-I9305 using xda app-developers app
Solved it allready! No modem problem or unlocking problem... just a problem with my SIM... tried a similar SIM from a friend of me who uses 3AT too and... Speeeeeddd!
My SIM... nothing happened!
I guess we can close this one and I want to say a big "THANK YOU!!" to all of you for spending time to help me! And a big thanks to XDA it self! :thumbup: :thumbup:
Sent from my GT-I9305 using xda app-developers app