Hello all. I've recently been trying to get into Android development, more specifically Kernel development. I've played around with some kitchens and looked at the GB kernel sources from Samsung and tweaked it around.
Previously I previously learned Java to a point where I can put basic lines down and also more advanced stuff but with a bit of help here and there.
I have one question though, what would be the recommended path for creating an ICS Kernel. My plan is to start of with something "stock" and build up but I'm not quite sure what to consider stock seeing as the S1 never got ICS officially. Would I have to use CM9's Kernel sources and if so where do I acquire them.
I also have a good understanding of Ubuntu and its terminal and have a functional idea of what I'm doing there.
Related
Let's say that I wanted to get into android rom development, what would be a good place to start to learn. I've downloaded several e-books about android development, but they all pertain to writing applications for android OS, not really getting into modding the OS itself. I suspect I'd need to learn about linux then translate that knowledge to android?
Anybody have any good places to start or good reference materials?
It appears that none of the cyanogenmod team is even going to do anything with the Captivate, they're all working on I9000 and Vibrant, totally ignoring the Captivate. So, I thought I'd get in there and try and learn.
Building Android from source - their own site is the best for instructions on how to build android: http://source.android.com/
Building Captivate requires downloading the sources, building the kernel using the build_kernel.sh after you've fixed the toolchain paths. Or you can just use the usual linux kernel building method that the script actually does underneath.
Then you need to build eclair (or froyo). Samsung has opensourced most of the code but not all so you need to figure out how to merge vanilla eclair source into Samsung's tree, and build it. There is a readme in the source from Samsung about what to change in the build files.
You're going to be doing a lot of googling . . . I haven't figured out all the details of the Samsung eclair build so you're on your own there. Maybe others can chime in.
-Atin
atinm said:
Building Android from source - their own site is the best for instructions on how to build android: http://source.android.com/
Building Captivate requires downloading the sources, building the kernel using the build_kernel.sh after you've fixed the toolchain paths. Or you can just use the usual linux kernel building method that the script actually does underneath.
Then you need to build eclair (or froyo). Samsung has opensourced most of the code but not all so you need to figure out how to merge vanilla eclair source into Samsung's tree, and build it. There is a readme in the source from Samsung about what to change in the build files.
You're going to be doing a lot of googling . . . I haven't figured out all the details of the Samsung eclair build so you're on your own there. Maybe others can chime in.
-Atin
Click to expand...
Click to collapse
Thanks. Thats what I'm talking about, a lot of what you said seems Greek to me. I'd like to learn how to do all that. I guess, just read a lot from the google source website?
My advice would be to first learn how to go muck in the linux kernel and the Android sources in general. The Captivate code has been hacked some by Samsung so it doesn't quite follow all the rules about where files are supposed to go (there is no vendor tree for example) but at least it is a start. The google source site is the best for instructions on how to do vanilla stuff that's not hardware specific. Google around for more specific instructions related to the particular problem you are trying to solve after that.
Building working stuff at this level isn't easy. Unless you are somewhat experienced or willing to spend a lot of time learning and making mistakes, I'd say leave this to people who have some experience at this level and come back to it when building for the Captivate is well understood and the knowledge has been distributed enough so lots of people can help you when you have specific questions (no one likes answering general "how to" stuff on a device specific thread).
-Atin
Hey Guys,
I'm a developer for a living, and I'm interested in possibly working on a custom rom for my captivate. I was doing some research on how to get started, but the stuff I found was for HTC phones and involved using a starter that only works for HTC stuff.
Where can I go to find information on doing this? I'm largely interested in trying to port gingerbread, but my understanding was that until we have the full source this wasn't really possible (at least for something actually useable on a daily basis). I see supercurio is working on gingerbread, so information specific to this would be really helpful.
Thanks guys, and sorry if this should have been put in the QA section, I figured it was related to development, and could possibly be a sticky if it leads to useful info.
Pretty broad question. First requirement, is obviously...learn java.
I'm not sure if there's any specific "HOW-TO CODE YOUR OWN CAPTIVATE ROM" threads anywhere; there's general information available on http://developer.android.com , but modifying ROM's depends on the device it was written for.
As far as porting gingerbread, it will be very difficult without source and will definitely require quite a bit of kernel work. For information specific on this, supercurio would be the one to ask. Of course, the IRC's are also a great place to get information.
By the way, welcome to XDA! And I commend your motivation to develop stuff for the community here.
http://forum.xda-developers.com/showthread.php?t=869614
Doc over in the I9000 forums has the above thread started. I look there.
geokhentix said:
Pretty broad question. First requirement, is obviously...learn java.
I'm not sure if there's any specific "HOW-TO CODE YOUR OWN CAPTIVATE ROM" threads anywhere; there's general information available on http://developer.android.com , but modifying ROM's depends on the device it was written for.
As far as porting gingerbread, it will be very difficult without source and will definitely require quite a bit of kernel work. For information specific on this, supercurio would be the one to ask. Of course, the IRC's are also a great place to get information.
By the way, welcome to XDA! And I commend your motivation to develop stuff for the community here.
Click to expand...
Click to collapse
Again, I am a developer for a living. I know Java, I'm not looking for coding tutorials. I'm looking for information specifically regarding the captivate.
As far as gingerbread, it sounds like what you are saying is that what people like supercurio are working on is not really gingerbread? More of a Frankenstein created with the sdk, mashing together 2.2 kernels and what has been released for 2.3?
lbbo2002 said:
http://forum.xda-developers.com/showthread.php?t=869614
Doc over in the I9000 forums has the above thread started. I look there.
Click to expand...
Click to collapse
Looking at that thread, it appears the roms being made are just edited versions of already compiled roms? Is samsung not required to post the full source of their roms?
I'm assuming the issue with starting with the original android source, is that we wouldn't have drivers for half of the hardware in the phone. Is the only choice then to load the already compiled drivers from the samsung builds into the rom?
epoplive said:
Again, I am a developer for a living. I know Java, I'm not looking for coding tutorials. I'm looking for information specifically regarding the captivate.
As far as gingerbread, it sounds like what you are saying is that what people like supercurio are working on is not really gingerbread? More of a Frankenstein created with the sdk, mashing together 2.2 kernels and what has been released for 2.3?
Click to expand...
Click to collapse
There are different levels of making ROMs IMO.
You can combine work from others and make your own ROM. This requires no coding experience. For instance, I took JH7_OTA, dropped in Atinms Voodoo 3 kernel, removed bloatware, added my own custom framework (icons), etc., signed it and flashed it.
Then there is the whole Kernel side of things that requires an entire development environment (Linux) and C/C++ programming skills. I'm trying to get to this point. You can start by downloading the source and building it in your own environment familiarizing yourself with the codebase.
Indeed. Packing a ROM and making the contents of the ROM are two different sides of the spectrum. Even some minor framework modifications can be performed by the most tech-inept, as long as they have a good resource to work off of.
epoplive said:
Again, I am a developer for a living. I know Java, I'm not looking for coding tutorials. I'm looking for information specifically regarding the captivate.
As far as gingerbread, it sounds like what you are saying is that what people like supercurio are working on is not really gingerbread? More of a Frankenstein created with the sdk, mashing together 2.2 kernels and what has been released for 2.3?
Click to expand...
Click to collapse
I was only prodding fun when I mentioned learning Java, just to break the ice. All I'm saying is trial and error is the best way to learn Android if you're already a decent programmer. Without knowing what the source code looked like before Samsung owned it, we don't really have a base environment to work off of, which means we are modifying work that was already modified from stock; which is why it will be pretty hard to find a lot of definitive coding information about the Captivate.
Supercurio isn't making a frankenstein 2.2-2.3 hybrid. The kernel is where all of the information about your hardware resides. Supercurio needs to take the Gingerbread kernel from the Nexus S, and modify it to run with our hardware. You can't run a 2.3 ROM without a 2.3 kernel; so we CAN'T use a 2.2 kernel to run full gingerbread; and since a 2.3 kernel doesn't exist for the Captivate, he is using the Nexus s's kernel as a base, or as a reference to merge the differences between the two, creating a kernel that will support the Nexus S ROM on a phone that isn't the Nexus S.
epoplive said:
Looking at that thread, it appears the roms being made are just edited versions of already compiled roms? Is samsung not required to post the full source of their roms?
I'm assuming the issue with starting with the original android source, is that we wouldn't have drivers for half of the hardware in the phone. Is the only choice then to load the already compiled drivers from the samsung builds into the rom?
Click to expand...
Click to collapse
Correct. We don't have the source code for Froyo yet for the Captivate(or an OTA for that matter ), a lot of ROM's being made are based off of the SGS I9000 2.2 source, and because we have that source, we have a pretty much fully functional "captivated" i9000 kernel.
geokhentix said:
Indeed. Packing a ROM and making the contents of the ROM are two different sides of the spectrum. Even some minor framework modifications can be performed by the most tech-inept, as long as they have a good resource to work off of.
I was only prodding fun when I mentioned learning Java, just to break the ice. All I'm saying is trial and error is the best way to learn Android if you're already a decent programmer. Without knowing what the source code looked like before Samsung owned it, we don't really have a base environment to work off of, which means we are modifying work that was already modified from stock; which is why it will be pretty hard to find a lot of definitive coding information about the Captivate.
Supercurio isn't making a frankenstein 2.2-2.3 hybrid. The kernel is where all of the information about your hardware resides. Supercurio needs to take the Gingerbread kernel from the Nexus S, and modify it to run with our hardware. You can't run a 2.3 ROM without a 2.3 kernel; so we CAN'T use a 2.2 kernel to run full gingerbread; and since a 2.3 kernel doesn't exist for the Captivate, he is using the Nexus s's kernel as a base, or as a reference to merge the differences between the two, creating a kernel that will support the Nexus S ROM on a phone that isn't the Nexus S.
Correct. We don't have the source code for Froyo yet for the Captivate(or an OTA for that matter ), a lot of ROM's being made are based off of the SGS I9000 2.2 source, and because we have that source, we have a pretty much fully functional "captivated" i9000 kernel.
Click to expand...
Click to collapse
Ah, thanks, that's pretty much the information I was looking for.
Hi,
I'm trying to build cyanogenmod 6 (froyo) from sources on github for G1.
Sidenote. The reason I'm trying to do this is i'd like to modify kernel parameters. I'm trying to make the phone talk to external device using built in serial port. I can do it with my current CM6, but it looks like serial debugger engages and starts responding to the device and also steals some of the data being sent to phone.
To build I used instruction posted at cyanogen wiki "HTC Dream & Magic: Compile CyanogenMod (OS X)" which covers gingerbread but checked out froyo-stable branch at first. I know that gingerbread version stopped supporting G1 at some point last year.
Without much success even after fixing manifest to point to updated repo urls from kernel.org to googles repo etc. The problem is that apache-http seems incompatible with old sources and it is referenced by head.
I also tried froyo branch, but it doesn't build as well because something seem to be broken for dream_sapphire, and it is not present in the devices anymore.
I've tried searching for compilation errors, and general build questions/instructions here and on cyanogen's forum, but looks like CM6 is not very active these days.
Can someone point me into right direction where to search for relevant info on building it? Would getting a proper revision help or should I combine stuff from several branches to make it work?
I've already spent quite a lot of time figuring out how build is being configured and how things stitch together but without much progress on the actual build.
And with times required to sync a whole repo and build it, it is becoming frustrating.
Any help would be muchly appreciated!
Regards,
Oleg
It's dead.
I also wanted to make a cm6 rom, but I couldn't get anything to work.
I got the addresses all updated but it looks like a bunch of the files have completely dissappeared. You may be able to make it skip those, but then it may not work completely.
Go for AOSP?
Now that's a shame. I wanted to build CM because I'm familiar with it and the other thing is that they have reasonable instructions about building it. But at least I don't need to waste my time trying to figure out how to fix it.
In fact I don't need any extras they provide, a bare android would suffice to me if all the sensors and connectivity would be available. But I'm not familiar with internals of building vendor specific stuff. My understanding was that I need proprietary parts together with AOSP to build a working ROM and that's one of the things CM guys did. Correct me if I'm wrong.
aliher1911 said:
Now that's a shame. I wanted to build CM because I'm familiar with it and the other thing is that they have reasonable instructions about building it. But at least I don't need to waste my time trying to figure out how to fix it.
In fact I don't need any extras they provide, a bare android would suffice to me if all the sensors and connectivity would be available. But I'm not familiar with internals of building vendor specific stuff. My understanding was that I need proprietary parts together with AOSP to build a working ROM and that's one of the things CM guys did. Correct me if I'm wrong.
Click to expand...
Click to collapse
Nope AOSP is as easy to build now
Go to the android site and follow directions
Google for "build android"
At the part when doing repo init you need to get the right branch
Go to "build for devices" then scroll down for recommended branches and look for the dream
One thing you'll need to do differently is do "make otapackage" instead of plain "make"
And once that's done you'll need to tweak the zip and get rid of the "recovery" folder and tweak the updater-script
Oh yeah, and I don't know exactly how you would do this part, but you'll need to get the source for a newer kernel in there, like ezterry kernel and use it with 2708+ radio/spl
Unless you wanna use the AOSP kernel & spl & radio which is old
What I did is just flash his kernel after the rom, but you want to do kernel stuff so yeah...
Sent from my HTC Dream using Tapatalk
Hi everyone!
I'm looking to become a future dev of the Samsung Captivate Glide, but as we're awaiting the official ICS from AT&T the forum right now is pretty dead. We have a project going but nobody to guide us, and we wish to compile CM9 or AOSP ICS. Would anyone take me in and teach me the basics of ROMing? I would greatly appreciate it! I have a Mac and Windows, I'm not sure if Linux is required :|
~Aquethys
the rom is the least of the worries to get dev going on your phone, getting the kernel going is the hard part. does your phone have the source code released?
I don't believe so, people in our ics port thread are saying we don't have a working ics kernel. We do have a gingerbread kernel though... :/
How would I start?
Sent from my SAMSUNG-SGH-I927R using xda premium
well you take parts from the GB kernel and apply it to parts from the AOSP kernel, and troubleshoot until it boots. then you troubleshoot all the other issues, there will be issues, then you can start doing fancy things like add cwm. then tweak the kernel....
start reading on kernels, ramdisk, rils, libs, and drivers, linux, compiling, AOSP, github repositories.
you might be ready to take on this task in 6 months.... minimum
dont take that as snooty, ive been on here over a year, and know jack squat about half the things i just told you to study. though i have no desire to build kernels myself. there is lots of great info scattered all over xda. but you will need an experienced dev, to port ICS. you need to know basic kernel modification stuff before trying to do something as big as porting a new android version from out your but.
automated compiling isnt as automated as it sounds.
Alright. What programs will I need to begin with? Hopefully an experienced dev can guide me, I'm not too good @ following guides/tutorials but I'll try my best!
Sent from my SAMSUNG-SGH-I927R using xda premium
EDIT: Made a dropbox account, hopefully you could guide me through the basics?
So, is this the source code for SGH-I927 you were talking about? I downloaded it, what do I do with it? Is it different for ICS and GB?
Hi All,
I am currently an undergraduate of FCC and I am going to transfer probably to Maryland after 2 years. I am majoring in computer science or computer engineering and I have always been interested in Android and development. Ever since my droid X I have been running custom roms and kernels and such. I feel it is time to try and make my own. I was wondering if any of the amazing developers on here would be interested in helping me out just through some conversations on hangouts. If anybody is interested in helping me out my hangouts is: [email protected]
I'm no professional at this, I've only made a kernel and built cm from source with a few mods for my old vs980 (LG g2). But I'm in the process of setting up my HP to start building a ROM for my Nexus 6.
First things first, go grab a copy of a Ubuntu 14.04.4 LTS and get it installed on whichever computer you will be building off of. Once your up and running and all of your driver's are working properly, follow This Guide.
It will lead your through the process of setting up you build environment, downloading source, and compiling a successful rom.
After you have your first ROM running on your device, start experimenting with different toolchains, adding commits, different mods, etc.