I made some changes to build.prop using rom toolbox but when I restart the device it shows boot logo and then goes blank.
Stock Rom(2.3.6) rooted
Baseband-s5830ddkq8
Please help me
thanks
hemmannt said:
I made some changes to build.prop using rom toolbox but when I restart the device it shows boot logo and then goes blank.
Stock Rom(2.3.6) rooted
Baseband-s5830ddkq8
Please help me
thanks
Click to expand...
Click to collapse
Force download and flash stock rom via odin multidownloader
Have you made a backup through CWM Recovery
If you dont made backup
Make a request to made a flashable zip file with stock build.prop in it
So if you flash it , it will replace your edited build.prop with original build.prop file
Sent from my GT-S5360 using xda premium
nagendhra.sudheer2 said:
Have you made a backup through CWM Recovery
If you dont made backup
Make a request to made a flashable zip file with stock build.prop in it
So if you flash it , it will replace your edited build.prop with original build.prop file
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
I had made changes to build.prop after taking a backup of it.Also, I have restored the stock build.prop.
Tried to flash the Rom using Odin Multi downloader.In the message section it shows:
big partition size
mibib download
Also, the previous version of odin for Gt-s5830 was 4.38 and now 4.42.
hemmannt said:
Tried to flash the Rom using Odin Multi downloader.In the message section it shows:
big partition size
mibib download
Also, the previous version of odin for Gt-s5830 was 4.38 and now 4.42.
Click to expand...
Click to collapse
cwm backup??
side_effect said:
cwm backup??
Click to expand...
Click to collapse
I don't have cwm backup.
anyone there?please help me.i am waiting.....:crying:
Even I have the same problem
hemmannt said:
anyone there?please help me.i am waiting.....:crying:
Click to expand...
Click to collapse
Can someoone pls help. I am beginner I dont know how to do the flash via odin? Any help pls
ace duos s-6802
ragavanrajan said:
Can someoone pls help. I am beginner I dont know how to do the flash via odin? Any help pls
Click to expand...
Click to collapse
hi iam Rana.........is it ur problem is that when u give a command to restart from (romtoolbox >tools>rebooter) it shows a black screen and u have to remove battery and re put it to on.................
ragavanrajan said:
Can someoone pls help. I am beginner I dont know how to do the flash via odin? Any help pls
Click to expand...
Click to collapse
Never hijack anyone's thread.
And for God's sake use Google!
4ranag said:
hi iam Rana.........is it ur problem is that when u give a command to restart from (romtoolbox >tools>rebooter) it shows a black screen and u have to remove battery and re put it to on.................
Click to expand...
Click to collapse
How can you guess his problem?
___________XDA Premium__________
Don't be a noob. Be a newbie..!!
Details here.
____________________________________
hemmannt said:
Tried to flash the Rom using Odin Multi downloader.In the message section it shows:
big partition size
mibib download
Also, the previous version of odin for Gt-s5830 was 4.38 and now 4.42.
Click to expand...
Click to collapse
You have the correct .ops ?
Sent from Ursa's claws.
Related
Hi people!
My phone is bricked and I found a backup of my efs (efs.rfs), but I can't flash because I only get crash in ODIN.
What can I do? What's wrong with ODIN?
Best Regards,
Cristian Silaghi
Have you done a nandroid backup? And also can you access to CWM? If yes try to erase everything.
And for odin do you used download mode? Try to unzip the stock rom and put it correctly in program then use download mode, connect your phone and let's start till it finish.
If everything don't work, go to S.A.V and say you don't know what happen'd to your if your warranty is safe.
Sent from my GT-S5570 using xda premium
lightstar3103 said:
Have you done a nandroid backup? And also can you access to CWM? If yes try to erase everything.
And for odin do you used download mode? Try to unzip the stock rom and put it correctly in program then use download mode, connect your phone and let's start till it finish.
If everything don't work, go to S.A.V and say you don't know what happen'd to your if your warranty is safe.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
No, I didn't done a nandroid backup.
It's just flickering when I boot up and when I access CWM.
Yes, I used download mode.
Do I need a special archiving mode for ODIN?
Go to cwm, wipe everything and then flash a new rom like dreamw or another rom. And then when flash is finish wipe everything again.
Sent from my GT-S5570 using xda premium
lightstar3103 said:
Go to cwm, wipe everything and then flash a new rom like dreamw or another rom. And then when flash is finish wipe everything again.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I can't access Recovery Mode/CWM. It's flickering the screen. What can I do it's just access Download Mode. There's a chance to make phone work if I flash my original stock firmware (but I can't find on the internet firmware stock from Orange Romania, Froyo version, that version which came with the phone).
Then flash a stock firmware this is the most simple for save your phone
Sent from my GT-S5570 using xda premium
lightstar3103 said:
Then flash a stock firmware this is the most simple for save your phone
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I repeat: I can't find my original stock firmware from Orange Romania. Nobody leaked it...
I tried some "miraculous" firmwares which worked from some users, but I think that firmwares was the original ones which came with those phones.
Contact this user.
U are not clear, if ur phone is bricked nothing can be done.
Of course they are not 100% original firmwares but they work and that is all that is needed.
As u can access download mode just flash a GB stock firmware.
roofrider said:
Contact this user.
U are not clear, if ur phone is bricked nothing can be done.
Of course they are not 100% original firmwares but they work and that is all that is needed.
As u can access download mode just flash a GB stock firmware.
Click to expand...
Click to collapse
But if I have access in Download Mode, and nothing else works, what is this? Just a simple flickering?
stelistcristi said:
But if I have access in Download Mode, and nothing else works, what is this? Just a simple flickering?
Click to expand...
Click to collapse
U didn't tell how u got a brick?
Is ur download mode screen flickering?
what error do u get in odin?
roofrider said:
U didn't tell how u got a brick?
Is ur download mode screen flickering?
what error do u get in odin?
Click to expand...
Click to collapse
I installed "Galaxy Ace Unlock".
The screen is flickering when I start the phone and when I access CWM/Recovery Mode.
Only thing what works is Download Mode (without flickering).
ODIN just crashes (Galaxy Ace Unlock made a backup, but that backup cannot be flashed in ODIN, at least in my case) when I try to flash EFS.
Maybe ODIN doesn't support of flashing EFS backup in GT-S5570... Can anybody confirm that I'm wrong?
Galaxy ace unlock? Did i miss something? I tought you cant flash ace things on mini. However, i got the stock rom here: http://www.mediafire.com/?zx83r9p30zqxd6r
Its stock 2.3.4 for galaxy mini.
Sent from my sending thing...
domini99 said:
Galaxy ace unlock? Did i miss something? I tought you cant flash ace things on mini. However, i got the stock rom here: http://www.mediafire.com/?zx83r9p30zqxd6r
Its stock 2.3.4 for galaxy mini.
Sent from my sending thing...
Click to expand...
Click to collapse
Still bootloop after flashing your files.
What did you use to unzip the zip file?
Sent from my sending thing...
domini99 said:
What did you use to unzip the zip file?
Sent from my sending thing...
Click to expand...
Click to collapse
7z
This is a tutorial i helped someone else with:
I think you already got the files, in case not download them again.
--WARNING-- Your phone must be charged to 90% or more, to prevent flash failure.
okay, put your phone in download mode. (power button, home button, and volume down button at same time) connect it to usb, and start odin.
Select ops file,
than select the boot file, named: APBOOT_S5570XXKPI_CL260130_REV02_user_low_true.tar.md5
Select Phone file: MODEM_S5570XXKPI_CL260130_REV02.tar.md5
The PDA file: CODE_S5570XXKPI_CL260130_REV02_user_low_true.tar.md5
and as last the CSC file: CSC_S5570SERKPI_CL260130_REV02_user_low_true.tar.md5
--MAKE SURE THIS IS RIGHT, AND ELSE YOUR PHONE CAN BE FATAL BRICKED!!!--
okay, all good?
right. click start.
wait till your phone reboots,
THEN, remove your usb cable.
and then the last part: Have fun!
----------------------------------------------------------------------------------------------------------------------------------------------------------
Files to download
http://www.mediafire.com/?zx83r9p30zqxd6r
Use a powerfull unzipper like 7-zip or winrar, windows explorer will take ages.[/QUOTE]
Hope it helped you.
Sent from my sending thing...
Ps. Did you install kies drivers? If not no wounder why you bootloop.
Sent from my sending thing...
/efs backup can help you only when your IMEI gets corrupted and you don't have gsm network. That means you can boot Android, but you will have problems with baseband.
You have another type of problem, right now efs can't help you, you must boot into system first.
domini99, tried already to do that. Without success
---
domcale, the app "Galaxy Ace Unlock" made a backup of /dev/block/stl5 (called "stl5.rfs") which I found on memory card.
If I can't boot up in system/CWM/Recovery and I can enter in Download Mode, what this means?
Can't enter recovery? Dunno why you can't, but if you can enter download mode, then you can flash stock rom using Odin
So I tried to install a rom and every thing went fine. I rebooted my phone via clockworkmod and then it shows me the logo of Galaxy mini 2 and the screen gets whiter and whiter. I tried going back to CWM but it wont open the only thing i can do is go to download mode.
So if somebody coud help me i would appreciate it.
Have you tried reflashing stock?
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
TheWhisp said:
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
Click to expand...
Click to collapse
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
easy
MINI 2 said:
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
Click to expand...
Click to collapse
go into download mode and flsh stock rom via odin
did you flash the trebon build ? If so, you should be able just to reflash with odin
TheWhisp said:
did you flash the trebon build ? If so, you should be able just to reflash with odin
Click to expand...
Click to collapse
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
Download a rom from sammobile for GT-S6500(D or whatever) then download odin3 put ur phone in DL mode press power vol down and home
Install kies and reboot pc
Open Odin3 go to PDA and select the file u downloaded
Press start and wait
Sent from my GT-S6500D using xda app-developers app
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
You could follow my TUT here. xD
take the flashing guide part
Next time, please, check carefully what you're flashing.
Thank you all for your comments.
TheWhisp said:
Next time, please, check carefully what you're flashing.
Click to expand...
Click to collapse
Will do.
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
TheWhisp said:
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
Click to expand...
Click to collapse
Idk, i downloaded it and installed with CWM 6.0.2.8. I havent had any error or warning.
If you can access the Download Mode flash the stock firmware.. mine can't even acces the Download Mode even with USBJig, it still shows a white line..
he had a soft brick, you had a hard brick.. take it to the service center
This should be posted in Q n A not in Android Development.
then report it...posting there is waste of time...since most or all of mini 2 users are here...
Can anyone please suggest me how to root this phone with JPLK2 build type and android stock gingerbread rom?? This phone is from UAE and the methods shown to root did not apply to this build type
Sent from my GT-I9070 using xda premium
Install from stock recovery
or
Rooted firmwares for ginger
Darkness and Hope said:
Install from stock recovery
Click to expand...
Click to collapse
I tried this one but it says signature verification failed. Any ideas to overcome this??
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
I tried this one but it says signature verification failed. Any ideas to overcome this??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I think no, install a rooted firmware
Edit : Or you can try this tool, too
Darkness and Hope said:
I think no, install a rooted firmware
Edit : Or you can try this tool, too
Click to expand...
Click to collapse
How can I install rooted firmware? Can u guide me? And that tool isn't working I tried
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
How can I install rooted firmware? Can u guide me? And that tool isn't working I tried
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I gave link, guide is already here :cyclops:
Download the Pre-Rooted firmware that matches the firmware your using.
Extract the RAR file, you will end up with a folder with two files in it.
SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5
Close any KIES application that might be open.
Open ODIN.
Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.
Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.
Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
Do NOT select "Repartition"
Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN
Plug your phone usb cable to your computer.
If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers
Click the "START" button and wait for it to finish.
Do NOT unplug the usb cable before ODIN finishes its job.
If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
Then you can remove the usb cable.
Your device will reboot in Recovery Mode and will finish the installation.
When it finishes, it will reboot and start the Android System.
Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").
Click to expand...
Click to collapse
---------- Post added at 02:23 PM ---------- Previous post was at 01:46 PM ----------
If you find any solution/tool guide me too, I will turn stock GB :laugh:
Darkness and Hope said:
Install from stock recovery
or
Rooted firmwares for ginger
Click to expand...
Click to collapse
Hi sir ..can i request a rooted firmware of This?My phone is from KSA.Thanks and more power in advance sir
clerfa21 said:
Hi sir ..can i request a rooted firmware of This?My phone is from KSA.Thanks and more power in advance sir
Click to expand...
Click to collapse
Gingerbread is no more developing.No matter what firmware you use (as long as be in Gingerbread).
Anyway here rooted
http://bitshare.com/files/9akfhj9m/ROOTED_ARO_I9070UBLD1_I9070UVOLD1.zip.html
Darkness and Hope said:
Gingerbread is no more developing.No matter what firmware you use (as long as be in Gingerbread).
Anyway here rooted
http://bitshare.com/files/9akfhj9m/ROOTED_ARO_I9070UBLD1_I9070UVOLD1.zip.html
Click to expand...
Click to collapse
is this compatible to flash with my firmware sir?
got this error sir when i click start download
clerfa21 said:
is this compatible to flash with my firmware sir?
got this error sir when i click start download
Click to expand...
Click to collapse
It's compatible to every firmware.
Darkness and Hope said:
It's compatible to every firmware.
Click to expand...
Click to collapse
ok sir i will try to download it
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
Just download the factory image .md5 on sammobile.com and flash it via odin
Sent from my GT-I9070 using XDA Free mobile app
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
shut_down said:
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
Click to expand...
Click to collapse
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
AntaresOne said:
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I used to do that, I was just removing other stuff. And it was working just fine. BTW, I leave file without *.md5.
solution
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
silllentkiller said:
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
Click to expand...
Click to collapse
1. What problem?
2. He flashed GB kernel over JB - that is his problem.
3. How to downgrade - http://forum.xda-developers.com/showthread.php?t=2195673
4. Solution to have TWRP on JB is to install CoCore kernel with TWRP recovery, just go to developer section of our phone and look for CoCore thread.
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
matrixlover said:
Hi My Friends
I need a quick help cuz i tried to install firmware using Odin .... My friend firmware mobile is down suddenly then my friend tried to restore the firm but useless then he tried to go to someone before me cuz he wasn't in the town but also he failed after i get his mobile & i tried to enter download mode & i found what i added in attachments & i also i tried to go into recovery mode but i failed cuz i think no recovery installed & also i figured that last person who tried to flash firmware he put the wrong one that related into GT-S5690 not GT-N7000 i want help to recover the mobile even with the data or not but i hope with data cuz i'm stuck now .... Does the mobile fully dead or only condition is when it's actually dead & no power up ?
Click to expand...
Click to collapse
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
albatron34 said:
if you can get download mod then there si no problem, just download a official stock firmware and a correct pit file (found in this forum) and use odin 3.09
and flash your device hope this can help you.
Click to expand...
Click to collapse
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
matrixlover said:
I already downloaded official stock & i think i used a pit file & wrote successful may be not affect even it's a correct one .... can u get me this file & I'll try again hope u help my guys to get the mobile alive
Click to expand...
Click to collapse
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
albatron34 said:
google for this one : Q1-20110914_16GB.pit and use Odin3_v1.85
Click to expand...
Click to collapse
should be Odin3_v1.85 or may bey higher v3.09 ?
matrixlover said:
should be Odin3_v1.85 or may bey higher v3.09 ?
Click to expand...
Click to collapse
for me i bricked my phone after wrong flash; i used odin 1.85 and pit file 16GB and officiel stock jbrom and my phone now is ok.
good step by step guide :
http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/
I'm tried using odin 1.85 but it stuck when i tried to use pit file & now i tried to ener download mode it shows me use volume up but when i click the screen goes black may be the battery even i charged it externally i'll try to get another battery but now i stuck what shall i do ?
why no replay anyone help me
matrixlover said:
why no replay anyone help me
Click to expand...
Click to collapse
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
So there any idea to put the right one using anything or what ?!
matrixlover said:
So there any idea to put the right one using anything or what ?!
Click to expand...
Click to collapse
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
ThaiDai said:
because of that: "he put the wrong one that related into GT-S5690 not GT-N7000"
Click to expand...
Click to collapse
AndroidSlave said:
Nothing to see here....move along
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
AndroidSlave said:
See if PhilZ tar (not the philztouch file) will flash with Odin and post back.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
I'm sorry if i get u tar is flashed & repartitioned but u mean with Philz the tar file ? & philztouch file what do u mean exactly ?