[Q] Backup of current ROM - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

I'd like to start playing around with ROM's for my SGN but I'd like to know if there is a way to make a backup of my current Gingerbread 2.3.6 Stock ROM.
Maybe with PC Odin? Can I dump my current ROM to a flashable file to be able to go back to stock Gingerbread whenever I want?
I'd really appreciate your help. Thank you.

Its called a nandroid
get yourself CWM recovery and then boot into it, Go to back up and job done, It will create a nandroid.
Now all you have to do is boot back into recovery and restore it when you want !

Thank you azzledazzle. I'm very familiar with CWM and Nandroid backups I was thinking that maybe there was another way. Does the Nandroid backups also backup the kernel? or would I have to downgrade to stock GB kernel first if I want to downgrade from ICS?

I do believe it backs up the kernel too, However i wouldnt recommend restoring a GB nandroid from a ICS ROM, I would suggest to flash GB in ODIN, then restore nandroid.
Flashing with odin only takes 5 mins
It might work, restoring from ICS to GB via nandroid, But i havent seen any confirmation on this, and what with the bricking risks and all that, Its better to be safe than sorry !

Thank you again. That makes sense.
One last question... maybe if you don't know someone else might:
Are all Gingerbread kernels the same, I mean are all 2.3.6 kernels the same for all Galaxy Note Stock ROM's regardless of CSC? Or is there a possibility that my current GB 2.3.6 ROM is not "compatible" with one of the existing GB 2.3.6 kernels (in case there is more than one)?
For instance if I go back to my firmware with CSC TTT and install a kernel for say CSC XME, will that work? and which CSC will my phone end up with, TTT or XME?
Thanks again for your help. Much appreciated.

Related

[Q] A way to backup whole stock rom

Hi guys, im new to the sgs, but got some android experience. I was wondering if i can backup the whole ROM/system from my sgs (running 2.2.1 but its kinda branded from my carrier), so that i can flash the latest 2.3.3 or even 2.3.4 with odin and if for any reason i have to take it into warranty, i can reflash (preferably with odin) the stock branded rom that came with my phone. I would really appreciate, if anyone can tell me that, i searched around but couldnt really find this specific question. ive checked the stock ROM thread, and my version is there but im not sure its the branded one, cuz mine says 2011.02 and the one there says december 2010.
As long as you are rooted and have clockwork mod installed you can do a nandroid backup from the recovery menu I believe.
To restore you would have to flash the same base rom though, i.e. any 2.2.1 ROM then let it reboot then root it boot into recovery and restore nandroid backup.
I think that should work.
I'm sure someone wil correct me if I am wrong.
I wish I had done this when I bought by phone from Orange UK branded.
If you find out how to create an odin version please post here for others too.
ok thanks, i flashed the newer version over anyways.. thanks anyways
Is this correct?
Is this correct?
I have the same issue and after having mine sent into samsung for a successful repair (with a bunch of arguing and persuasion) I would like to back up this stock rom before continuing in order to avoid that situation again.
Mines a i9000M (bell version )
You always have to hack the ROM a bit to have a backup. Either you flash a custom kernel that'll give you CWM/nandroid backup or you root the ROM so you can do some adb magic.
There are also tons of stock ROMs floating around the interwebs, so with any luck you can find your own stock there.

How to revert to stock kernel

I have a Bell SGS, GT-I9000m. I'm considering installing hardcore kernel only, i.e. no custom ROM. If later I want to revert to the stock kernel, how would I do that?
Thanks for your help.
Sent from my GT-I9000M using XDA App
I'm not quite sure if it is possible with the stock-kernel but if you can make a full backup (like with CWM) you could restore it later. But why do you want to get back to stock-kernel?
If the backup-possibility does not work you have to find the stock-kernel for downloading and flash it via Odin or you have to flash the whole stock-ROM with Odin.
Thanks for your answer. I can't make a Nandroid backup while I'm on stock (because I can't install CWM recovery because I'm on 3e stock recovery, not 2e)
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong? I guess I just wanted to know if it was possible.
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Sent from my GT-I9000M using XDA App
I should add, the site/repo question is for kernels and stock ROMs...
Thanks.
Sent from my GT-I9000M using XDA App
site1ca said:
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong?
Click to expand...
Click to collapse
Well, then just flash the whole stock-ROM and flash it (look at samnfirmware.com for firmwares).
site1ca said:
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Click to expand...
Click to collapse
Don't know if you'll find it anywhere cause nobody needs it.
Possible scenario
Alright, thanks for your help. I guess the one scenario that is bothering me is as follows:
1) Bell - FINALLY - releases their official Gingerbread update.
2) I've installed Hardcore kernel, which according to - http://forum.xda-developers.com/showthread.php?t=822756 - "works on all 2.2 and 2.2.1 ROMs".
3) Would I be able to install the Bell Gingerbread update with Hardcore kernel?
This is why I keep asking how I would revert from Hardcore because I obviously don't want to lock myself out of Bell updates forever.
It doesn't matter which kernel you are using when you are flashing with Odin. And Bell releases the updates later than Samsung, so you'd have the advantage of getting updates earlier with a 'free' firmware.
One solution to flash back the stock kernel is to extract the zImage (the kernel) from the stock rom and flash that with Odin or Heimdall.
But as far as I know having a custom kernel would not cause problems with installing a stock upgrade.
Done
I've installed Hardcore's kernel. Everything seems to be working fine, phone started up and picked up service.
I booted into recovery, enabled lagfix, turned on all of the recommended tweaks and then ran the Quadrant Standard. Things seem a bit faster, so I guess it's all good.
Next step, Darky's 10.1.
Thanks for your help, everyone.
One more question:
I did a Nandroid backup of everything (so data, dbdata, cache AND system). The restore option says "Be careful!". What's up with that? I mean, what's the caveat?
Thanks.
I've already made some NANDROID-backups, but never seen 'Be careful!'.
If the backup was succesful I wouldn't care about that.
*sigh*, I hate to keep adding questions on to this thread, but I must.
After installing the hardcore kernel and enabling tweaks and lagfix, I'm running into exactly this problem: http://forum.xda-developers.com/showthread.php?t=851970
My phone was extremely hot for a while, then I got a warning indicating that my internal phone storage was running low, etc.
Eventually, I found this file (/data/local/tsprsp) to be the culprit. I deleted it and rebooted and now my phone is fine. However, vibration just doesn't work at all!
Any ideas? Has anyone else run into this problem?
I was told that if you do a 'full' backup, in some cases restoration will fail with some error. But it depends on the version of the ROM you are using.
That is the reason why it is recommended to backup only data and if you want to restore, then first reflash your rom, then restore the data.
Thanks, zsori. That explains the "Be careful!".
Sent from my GT-I9000M using XDA App
After trying MIUI, a stock ROM will never touch my SGS again.
meresis said:
After trying MIUI, a stock ROM will never touch my SGS again.
Click to expand...
Click to collapse
you will have to flash back a stock rom via odin if anything wrong happen during the flashing of custom roms, although chances are low if you follow the instructions carefully.
good luck and have fun flashing custom roms!
Which Gingerbread?
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
site1ca said:
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
Click to expand...
Click to collapse
you got it wrong.
PIT is for mapping the partitioning of the phone. In most cases you should only use 512 pit file. and only use it when you want to wipe the phone.
the three parts is "pda" (which is the rom), "phone" (which is the modem), and "csc" (which is the carrier customization and apns)
the kernel is in the part of pda (the rom)
check the thread in xda of the kernel to see if its a gingerbread kernel or froyo kernel.
hope this clear things up
Yes, that helps. That's really good to know. So now, in Darky's guide to flashing Flash Ficeto_JVH_Odin, I see that only PIT and PDA are specified. This is reassuring, knowing that the modem and carrier stuff isn't touched.
Many thanks.
There are firmwares with three parts (Phone, PDA, CSC, including bootloader) and with only one part (PDA, no bootloader(?)). The one-part-FW is just an 'update', the one with three parts an 'upgrade'.

[Q] updating firmware without losing all settings

hello my phone is on firmware 2.3.4, baseband i9000xxjvs, kernel 2.6.35.7-i9000xxjvr and build gingerbread.xxjvr.
i want to update to 2.3.5 completely but is this possible without losing all settings?
when the update is done through kies you don't lose anything so is this also possible with odin or is there another way of doing it?
Tw1n said:
hello my phone is on firmware 2.3.4, baseband i9000xxjvs, kernel 2.6.35.7-i9000xxjvr and build gingerbread.xxjvr.
i want to update to 2.3.5 completely but is this possible without losing all settings?
when the update is done through kies you don't lose anything so is this also possible with odin or is there another way of doing it?
Click to expand...
Click to collapse
No as far as i know, you could flash a no-wipe version of the rom via cwm, but i would not recommend it.
The other solution is to backup and restore with Titanium backup.
backup and restore with titanium backup is the best thing..
but as 2.3.4 and 2.3.5 differs not really you can search for a CWM-Version of 2.3.5 without wipe, than youre settings will stay. Via odin afaik its not possible to flash a non-wipe ROM..
sphinx02 said:
Via odin afaik its not possible to flash a non-wipe ROM..
Click to expand...
Click to collapse
I have done this without repartition JVQ->JVR, via Odin, and it worked.
Of course, it was: stock to stock, odexed to odexed, another combi may not work.
And, although I agree with you that titanium is the best, for some apps I experienced fc after restore, so I had to restore, uninstall, install and then make backup.

[Q] A few questions about flashing stock GB

I'm currently on a LA6 2.3.6 gingerbread, stock, non rooted, and I'm growing quite inpatient with the ICS release dates, which won't happen anytime soon for my CSC, obviously.
If I flash one of the open stock GB roms (want to change my CSC to DBT or similar), will I get the orange triangle, and will my phone get recognized by Kies in case I decide to go for a pre-rooted one? Also, will data and calls work properly with a CSC different from my phone's original one(MSR)?
I just want my Note fully functional, yet be able to use it as if it was unmodified, if possible
I am sorry for the possible stupid questions, I just couldn't find any complete explanations/answers for these!
Sent from my GT-N7000 using XDA
Backup efs if you havent already done so. See my thread regarding q backups its got a link to how to do that.
Now just flashing stock gb wont increase counters. I havent found any malfunction myself, but reading postst in this forum has tought me the outcome can be different for anyone wtf.
So I suggest make cwm backup of current rom.
Download stock dbt rom gb, flash thought pc odin. Mind you better flash pre december rom so you can root it with root only method. Mind update ics throught kies you need to be unrooted. So if root is not important, flash latest version ics dbt right away. Then change csc it will wipe data. Then you have a possible, not gauranteed ota rom.
Just dont do wipe or factory reset in ics or cwm on ics.
Make sure you have a way back for warrantee, i.e your current rom download it somewhere next to nandroid backup lol
Sent from my GT-N7000 using Tapatalk 2

So let me get this straight...

I recently upgraded my Note to official ICS (OTA) and I'm not liking it AT ALL! Now I really want to get far away from this update as possible and I'd like to switch to a CM9 nightly Rom. I've that now that I have upgraded to the official ICS Rom, I run the risk of super bricking my device. So now I ask you to help me make sure the following is correct so that I may move on from this wretched update:
DO NOT perform wipes if you are on original Samsung ICS
DO NOT perform wipes if you are on a original Samsung kernel??
Flash back to original Gingerbread Rom using odin BEFORE flashing to CM9
Flash to different kernel??
I've flashed millions of Roms but this one is scary and I just want to make sure haven't missed anything... Have I?
Thanks for you help!!
John J
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Akiainavas said:
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Click to expand...
Click to collapse
Thanks a lot man!! This is pretty much what I thought but I wanted to make ABSOLUTE sure! Cheers!
John J
So is the super-brick BUG on the official ICS OTA?? OMG
And yeah go back to gingerbrear via odin, get root then flash any CM9 tru CWM no problems...
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
darkmuck said:
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
Click to expand...
Click to collapse
There is no need to unroot first. You can flash stock GB rom directly via Odin.
I've now flashed to GB but before I move on to a CM9 nightly, do you recommend I flash the CM9 kernel as well? Seems like it is not a prerequisite but I would like to make sure. Thanks.
John J
afaik, when flashing a CM9 Nightly, the eligible kernel is built in, so no need to flash anything but the ROM.
i'm on one of imilkas first CM9 port and it says [email protected] #1 under Kernel version in settings.
Yes. The correct kernel is included in the nightly.

Categories

Resources