[MOD] Long Press Volume Buttons to skip songs - Galaxy S III Android Development

Yes, finally it is here!
After couple of hours of coding in smali and debugging endless boot loops it works.
Change your music tracks when your screen is off and music is playing by long pressing the volume buttons.
Update:
- New JB and ICS support
- New 500ms timeout used instead of 1sec.
- New CWM flashable zip
- New Diff available for ROM cooks
ICS: Wanam-Lite ROM 1.7
JB: Wanam-Lite ROM 4.3 (4.1.1)
Enjoy!

jakubklos said:
Yes, finally it is here!
After couple of hours of coding in smali and debugging endless boot loops it works.
Change your music tracks when your screen is off and music is playing by long pressing the volume buttons.
You need to replace your /system/framework/android.policy.jar with the one below.
I am sure the ROM chefs will be soon putting this in their new ROMs.
I used the Wanam-Lite ROM 1.6 to decompile the original android.policy.jar so if you are on some latest ROM it should work fine.
Enjoy!
Click to expand...
Click to collapse
Doesn't work in Paranoid 1.5a (CM9).
It doesn't boot any more.

Would this work with Poweramp ?

Mikee.H said:
Would this work with Poweramp ?
Click to expand...
Click to collapse
This doesn't work on Omega 9 /Franco 10. Tried Poweramp and Sammy Music Player.
Changed permissions before rebooting so no problems there but long press on volume only makes the volume go up/down really quick as per stock.

Mikee.H said:
Would this work with Poweramp ?
Click to expand...
Click to collapse
Works with PowerAmp - but u must aktivate ICS-Lockscreen in PA settings.

[email protected] said:
Works with PowerAmp - but u must aktivate ICS-Lockscreen in PA settings.
Click to expand...
Click to collapse
ladies and gentlemen, i am an idiot.
i did not read the op properly.
this works when the screen is off.

I'm assuming this is just for Sammy roms as AOSP and AOKP already have these features built in.

I confirm that it works with Wanam 1.6.

ariedam said:
Doesn't work in Paranoid 1.5a (CM9).
It doesn't boot any more.
Click to expand...
Click to collapse
True, only stock based ROMs shoudl be supported. CM9 and AOKP already have this feature.
I have tested it on Wanam 1.5 and Wanam 1.6 but others should be working too.

Replaced the file and changed permission. Reboot the phone and it behaves the same in Sammy player and PA. ICS lock screen is always on for PA. Long pressing up and down will only change volume for me. I am on stock ROM and kernel.

I was looking for this mod since forever..thank you thank you thank you
Sent from my GT-I9300 using Tapatalk 2

A feature I missed from the AKOP roms, thanks.
Buggers shouldn't be choosers, but any chance of compiling one with a shorter long press duration?

Will this work on rgui miui if not can you please make a mod for it please
Thanks in advance

jhericurls said:
A feature I missed from the AKOP roms, thanks.
Buggers shouldn't be choosers, but any chance of compiling one with a shorter long press duration?
Click to expand...
Click to collapse
Might be a good idea. How many ms would you have in mind? It is about 500ms now.

jhericurls said:
A feature I missed from the AKOP roms, thanks.
Buggers shouldn't be choosers, but any chance of compiling one with a shorter long press duration?
Click to expand...
Click to collapse
I'm running Faryaab's AOKP and it's built-in, what AOKP are you running?

jakubklos said:
Might be a good idea. How many ms would you have in mind? It is about 500ms now.
Click to expand...
Click to collapse
Actually, it's 1000ms in your version. I decompiled, changed LONG_PRESS_TIMEOUT:I to 12c and compiled again and it's working great. 12c = 300ms, which is a good value.

Will this work on check Rom? thanks.

aydc said:
Actually, it's 1000ms in your version. I decompiled, changed LONG_PRESS_TIMEOUT:I to 12c and compiled again and it's working great. 12c = 300ms, which is a good value.
Click to expand...
Click to collapse
Ok good. If you are still able to change the volume too then it's fine. I will try when I get back from my vacation (on Wed)

spamcakes said:
I'm running Faryaab's AOKP and it's built-in, what AOKP are you running?
Click to expand...
Click to collapse
I'm now on a sammy rom and saying that I miss that feature.
aydc said:
Actually, it's 1000ms in your version. I decompiled, changed LONG_PRESS_TIMEOUT:I to 12c and compiled again and it's working great. 12c = 300ms, which is a good value.
Click to expand...
Click to collapse
possible to share your version?

w1nter456 said:
Will this work on check Rom? thanks.
Click to expand...
Click to collapse
Yes, it does. I didn't change any permissions and it works fine. Great mod!

Related

[MOD] JL5 Power Menu + Lockscreens [1.10.2011] Updated! *Stay Awake Option*

Well I just spent the last two days learning how to decompile/compile framework. FUN STUFF *sarcasm* Anyways, here is the power menu and lockscreen mod for stock deodexed JL5.
UPDATE 1/10/2011 - Settings now has "Stay awake" option under Settings>Applications>Development
All links have been updated. For those who have already flashed I have included just the Settings.apk at the bottom of the page.
JL5 Power Menu & Lockscreens > DOWNLOAD
JL5 Berserk Power Menu & Lockscreens > DOWNLOAD
JL5 black and white icons version > DOWNLOAD
Instructions
1. Place zip of your choice on internal sdcard
2. Reboot into recovery
3. Flash zip to phone
4. Reboot
Click to expand...
Click to collapse
This wipes the dalvik-cache so the first reboot will take about 5 minutes or so. I have made two versions. Both work the same, just one is themed to Berserk [<3].
Again, this is for stock deodexed JL5. Flash on other roms at your own risk. Be warned you will lose any theming you have such as accurate battery mods and such. Do not ask me to make an odexed version because it is not going to happen.
Thank you to Untermensch for his awesome write-up on the power menu mod as well as the lockscreens!
Thank you to Brick'd for advice that which helped in the compiling of the framework-res.
Thank you to S0niqu3 for the black and white icons
Enjoy Everyone!
Glad to see you got it compiled and working man! I may pick your brain on what did the trick here in the future. It looks great, good work.
Sent from my SGH-T959 using XDA App
nice goind on here man....great work....
I always wanted to use the stock rom...
im a nood....what you mean by deodexed and odexed?
Flashed on M9 rc1, looks great and very much needed. Thx for all your hard work Whitehawkx.
Sent from my SGH-T959 using XDA App
excellent excellent it really feels awesome to see someones great work get accomplished and fully operational. much kudo's and eventhough i like mine black and grey, i still appreciate the fact that you did it!
Awesome! Exactly what I wanted. Thank you so much for your hard work.
Works great.
Sent from my SGH-T959 using XDA App
gl3nng said:
nice goind on here man....great work....
I always wanted to use the stock rom...
im a nood....what you mean by deodexed and odexed?
Click to expand...
Click to collapse
odexed is locked from editing
deodexed is unlocked for editing... if you need to.
Annex1 said:
odexed is locked from editing
deodexed is unlocked for editing... if you need to.
Click to expand...
Click to collapse
thanks man
I've been looking for a flashable .zip file for m9 rc1 to add the extra functions in the power menu. Much appreciated, looks great
Glad to see you got it running . I need one for ginger clone how hard was it ?
I would use this but unfortunately ginger clone is jl4 . Any one know if this has been done for jl4 base roms ?
trying this now
im new to this,,,but i managed to root my vibrant and install ginger clone,beautiful...then in clockmod installed kernell and modem from JL5..working fine but now.my question can i install power menu and the lockscreens? thanks to all of you keep up the good work.
Br1cK'd said:
Glad to see you got it compiled and working man! I may pick your brain on what did the trick here in the future. It looks great, good work.
Click to expand...
Click to collapse
Thanks! Appreciate the tip on the compression/heap size. I added your name to the OP. I meant to when I uploaded them but at 2am... Saw your reply in the other thread. After I changed those settings it would compile no problem; the hardest part was sifting through all the resource ids. Definitely took some trial and error before I started getting the pattern/location. Now I know why these things aren't posted right away lol.
gl3nng said:
nice goind on here man....great work....
I always wanted to use the stock rom...
im a nood....what you mean by deodexed and odexed?
Click to expand...
Click to collapse
Annex1 said:
odexed is locked from editing
deodexed is unlocked for editing... if you need to.
Click to expand...
Click to collapse
This ^ Deodexed just makes theming easier. Most custom roms are deodexed.
justlovejoy said:
excellent excellent it really feels awesome to see someones great work get accomplished and fully operational. much kudo's and eventhough i like mine black and grey, i still appreciate the fact that you did it!
Click to expand...
Click to collapse
I could probably make one with gray scale icons but it wouldn't look so nice with the blue heading. Let me poke around and see how to changed the power heading from blue to black. Would definitely make it look better.
AgentFour20 said:
Glad to see you got it running . I need one for ginger clone how hard was it ?
I would use this but unfortunately ginger clone is jl4 . Any one know if this has been done for jl4 base roms ?
Click to expand...
Click to collapse
Not so much hard as it was just tedious. I would recommend Untermensch's instructions posted in the OP as a good starting point.
taurus193 said:
im new to this,,,but i managed to root my vibrant and install ginger clone,beautiful...then in clockmod installed kernell and modem from JL5..working fine but now.my question can i install power menu and the lockscreens? thanks to all of you keep up the good work.
Click to expand...
Click to collapse
Someone stated a few posts back that Gingerclone is based on JL4 so this unfortunately will most likely not work with it. The woman is running JL4 though so I might end up taking a look at it...
I went into voodoo recovery and chose install zip from sdcard. Found zip chose install. Go back, reboot : )
taurus193 said:
im new to this,,,but i managed to root my vibrant and install ginger clone,beautiful...then in clockmod installed kernell and modem from JL5..working fine but now.my question can i install power menu and the lockscreens? thanks to all of you keep up the good work.
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Can I add the blue battery indicator on top of this? I didn't see the warning about losing that til after I flashed. :-(
Sent from my SGH-T959 using XDA App
Yellow C6 said:
Can I add the blue battery indicator on top of this? I didn't see the warning about losing that til after I flashed. :-(
Click to expand...
Click to collapse
There are probably some accurate batt mods in the themes section that you could flash, but you will most likely lose this mod.
Been waiting for this. You have made my day. Flashing this now.
Very nice. Has anyone who has this also flashed JDan's SBG themes the flying animations with battery?
I updated the OP with another version that has the older black and white icons. Figured I'd throw out a few options for ppl.
Minor update! Settings now has the "stay awake" option under Settings>Applications>Development. All links have been updated and I also added a flashable zip for just the Settings.apk for ppl who have already flashed. Enjoy!

expanded quick settings / cifs kernel?

Hey guys, so got my sensation xl rooted and running nicely on the stock stock ics, just want 2 things;
Are there any custom kernels for the xl with cifs built in? also how Do I get expanded quick settings? Is there just an apk I can instal?
Thanks
geekyhawkes said:
Hey guys, so got my sensation xl rooted and running nicely on the stock stock ics, just want 2 things;
Are there any custom kernels for the xl with cifs built in? also how Do I get expanded quick settings? Is there just an apk I can instal?
Thanks
Click to expand...
Click to collapse
For ICS we don't have any kernel development unfortunately. As for EQS, that is in SystemUI.apk and can be found in my build
benjamin.j.goodwin said:
For ICS we don't have any kernel development unfortunately. As for EQS, that is in SystemUI.apk and can be found in my build
Click to expand...
Click to collapse
Thanks, i have grabbed the systemui.apk but how do i install it? I have copied your systemui.apk to /system/apps and rebooted but dont have anything different in my EQS? What have i missed
geekyhawkes said:
Thanks, i have grabbed the systemui.apk but how do i install it? I have copied your systemui.apk to /system/apps and rebooted but dont have anything different in my EQS? What have i missed
Click to expand...
Click to collapse
Or i could be less fo a fool and just flash them in CWM as you point out in your thread!
EDIT: Think i must have done something wrong, my phone wont boot into sense now, i flashed the % battery mod and SystemUI for EQS and now i get systemui has crashed messages all the time, sense never fully starts and i get into anything! Disaster.....
Thoughts?
Which ROM did you grab it from?
Best way to install is by adb pushing it
Just reflash the stock ROM over the top. Should fix your issues.
Sent from a Paranoid Nexus
benjamin.j.goodwin said:
Which ROM did you grab it from?
Best way to install is by adb pushing it
Just reflash the stock ROM over the top. Should fix your issues.
Sent from a Paranoid Nexus
Click to expand...
Click to collapse
Thanks, I grabbed it from the sense 4 load, hence the problems I made for myself. I decided to blank my phone and just go to your sense 4 final beta anyway. Eventually after a full format I got it back working. Just need to flash the extra quick settings and recent apps riles now and sorted. Thanks for your help
geekyhawkes said:
Thanks, I grabbed it from the sense 4 load, hence the problems I made for myself. I decided to blank my phone and just go to your sense 4 final beta anyway. Eventually after a full format I got it back working. Just need to flash the extra quick settings and recent apps riles now and sorted. Thanks for your help
Click to expand...
Click to collapse
Glad you're all sorted. guessing you were on sense 3.6 before which is why it didn't work
Sent from a Paranoid Nexus
benjamin.j.goodwin said:
Glad you're all sorted. guessing you were on sense 3.6 before which is why it didn't work
Sent from a Paranoid Nexus
Click to expand...
Click to collapse
Yes think that was the issue. Thanks for your help, just out of interest, any chance of your final build having cifs supported in the kernel? Im just starting to teach myself how to compile kernels, hopefully il be able to contribute soon!
I personally don't touch kernels, but vertigo does. Not sure whether he will have time to do one.
I hope to soon start playing with them when I get some more time, but if you manage to make one then maybe I can bang it in

[MOD] Search button remap + volume wake mods

Searched high and low for this, didn't find anything, so I went on and did it.
Attached are flashable .zips to give the Search button the default pre-JB behaviour, allowing for in-app search and/or activate wake with volume rocker. One with both mods, one with vol. wake only + undo .zip.
Works with stock deodexed JB ROM.
Credit goes to Articudos. I have decompiled android.policy.jar, modded it for volume wake, then created the .zips modifying his (his thread is here http://forum.xda-developers.com/showthread.php?t=1788719 if you want the JB key layout fix only).
Tested on my device and it works. Nevertheless, flash at your own risk.
Enjoy!
The guy is here.
http://forum.xda-developers.com/showthread.php?t=1788719
This thread needs bump anyway...
Sent from my Nexus S using Tapatalk 2
Articudos said:
The guy is here.
http://forum.xda-developers.com/showthread.php?t=1788719
This thread needs bump anyway...
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Hey mate! Thanks. By the way, does your mod work on stock ODEXed JZO54K? Got an old i9023 after frying my i9020, I want to refrain from flashing away like a mad man for a while...
waterface said:
Hey mate! Thanks. By the way, does your mod work on stock ODEXed JZO54K? Got an old i9023 after frying my i9020, I want to refrain from flashing away like a mad man for a while...
Click to expand...
Click to collapse
Yes, it works.
Sent from my Nexus S using Tapatalk 2
Will the volume wake mod work on 4.2 ROMs?
anshumandash said:
Will the volume wake mod work on 4.2 ROMs?
Click to expand...
Click to collapse
no
It doesn't seem to work on stock .4.1.2
Sent from my Nexus S using xda app-developers app
Volume Wake doesn't work on JellyShot v2.2.5 + marmite 7.3 either. It just plays nexus logo and doesn't budge. Tried 2 times already. NeeEeD VoluMe WakE...
EDIT.
I'm stupid, there's already Volume rocker wake in settings...
i try it on 4.2.1 rom and not working ..anyone can make it to 4.2.1 ?
leap_ahead said:
i try it on 4.2.1 rom and not working ..anyone can make it to 4.2.1 ?
Click to expand...
Click to collapse
I'm sure 4.2.1 has it built in... At least JellyShot does. Go to Settings->Screen->Volume rocker wake!
karabaja2 said:
I'm sure 4.2.1 has it built in... At least JellyShot does. Go to Settings->Screen->Volume rocker wake!
Click to expand...
Click to collapse
Its add on my friend ..no on all 4.2.1 rom
thanx
Can you make one for 4.2.1 with search button remapped to show recent apps?
Sent from my Nexus S 4G using xda app-developers app
waterface said:
Searched high and low for this, didn't find anything, so I went on and did it.
Attached are flashable .zips to give the Search button the default pre-JB behaviour, allowing for in-app search and/or activate wake with volume rocker. One with both mods, one with vol. wake only + undo .zip.
Works with stock deodexed JB ROM.
Credit goes to Articudos. I have decompiled android.policy.jar, modded it for volume wake, then created the .zips modifying his (his thread is here http://forum.xda-developers.com/showthread.php?t=1788719 if you want the JB key layout fix only).
Tested on my device and it works. Nevertheless, flash at your own risk.
Enjoy!
Click to expand...
Click to collapse
Hi, will it work on my samsung skyrocket i727 att with official jelly bean 4.1.2. I need volume rocker wake for my phone please help. Thanks.
works on stock 4.1.2?
thanks
bro
Hey bro. Can I have the tutorial how to mod like wake on volume rocker?
ironia. said:
works on stock 4.1.2?
thanks
Click to expand...
Click to collapse
I try it on aosp and is ok !! thanks
Doesn't work on my device
Spice mi525
4.2.1 stock odexed rooted
Here is my android policy
http://www.4shared.com/zip/Lt0-N_-6/android_policy.html
Please edit it
I just want volume rocker nothing else
Sent from my Spice Mi-525 using Tapatalk 2

softkeyz

Softkeyz is working great on n6 thought I'd share
https://play.google.com/store/apps/details?id=com.janis605.softkeyz
Perfect, I can confirm that there are no issues on stock rooted as well. Just what I've been looking for ?
Sweet. Already had it downloaded just haven't tried it..
jaythenut said:
Softkeyz is working great on n6 thought I'd share
https://play.google.com/store/apps/details?id=com.janis605.softkeyz
Click to expand...
Click to collapse
Link to your wallpaper please..
droidguy22 said:
Link to your wallpaper please..
Click to expand...
Click to collapse
Here you go
Can u swap the task and back buttons with this app?
Glad to see this updated for lollipop. Ive been using zip themer to theme my navkeyz but it no longer works on this based roms. Im curious to see if itll work on roms like LS, RR, and Validus where zip themer no longer works
Crosserson said:
Can u swap the task and back buttons with this app?
Click to expand...
Click to collapse
Don't think so I've had a look can't see the option for it but I may be wrong
Crosserson said:
Can u swap the task and back buttons with this app?
Click to expand...
Click to collapse
Unfortunately you can't..
chris6278 said:
Glad to see this updated for lollipop. Ive been using zip themer to theme my navkeyz but it no longer works on this based roms. Im curious to see if itll work on roms like LS, RR, and Validus where zip themer no longer works
Click to expand...
Click to collapse
Well it works on roms that zip themer doesnt but the back button looks weird like its stretched out. I contacted the dev and apparently hes already working on a fix
Can you add menu button? Is that a option? Thx in advance
Nexus 6>Validus>TeamBlackout
I don't believe the app allows you to edit the navigation bar, so much as changes the icons that are already there.
I've had this app installed on my phone since I got it waiting for the lollipop update. When I saw it update I was happy now I can use my Nexus buttons on any ROM. ZipThemer doesn't work on most ROM's now because of the way the nav images change in lollipop. My buttons are posted below
Pilz said:
I've had this app installed on my phone since I got it waiting for the lollipop update. When I saw it update I was happy now I can use my Nexus buttons on any ROM. ZipThemer doesn't work on most ROM's now because of the way the nav images change in lollipop. My buttons are posted below
Click to expand...
Click to collapse
Looks nice mate might get that setup myself
jaythenut said:
Looks nice mate might get that setup myself
Click to expand...
Click to collapse
Thanks, I might make some Android robot keys if I get around to it. I start my spring semester tomorrow so we will see
Pilz said:
I've had this app installed on my phone since I got it waiting for the lollipop update. When I saw it update I was happy now I can use my Nexus buttons on any ROM. ZipThemer doesn't work on most ROM's now because of the way the nav images change in lollipop. My buttons are posted below
Click to expand...
Click to collapse
Yo Pilz, got my blue keys back on LS! Lol
Also softkeyz doesnt work that good with Validus rom. When you use the app to change the keys the back key looks stretched out. I discussed this with the dev of the app and apparently there are other roms on other devices that are having this problem so i sent him several files he asked for so he can fix the issue. Works great on cm based roms and LS
chris6278 said:
Also softkeyz doesnt work that good with Validus rom. When you use the app to change the keys the back key looks stretched out. I discussed this with the dev of the app and apparently there are other roms on other devices that are having this problem so i sent him several files he asked for so he can fix the issue. Works great on cm based roms and LS
Click to expand...
Click to collapse
Thanks for the update, as long as it works on LS I will be happy.
Pilz said:
Thanks for the update, as long as it works on LS I will be happy.
Click to expand...
Click to collapse
Yea me too. I dont use Validus very much. I only use BlissPop an LS and it works great on those
chris6278 said:
Yea me too. I dont use Validus very much. I only use BlissPop an LS and it works great on those
Click to expand...
Click to collapse
I tried bliss, but there's way too much going on in that ROM for me to like it.

[MOD][XtreStoLite] Ambient Display for XtreStoLite Marshmallow

I tried this mod ONLY on XtreStoLite for G920F model.
If you wanna test this on other carriers using same rom, please BACKUP first.
If something goes wrong, just RESTORE!
Let me be very clear: I am not responsible if your device explodes, your dog runs away, your wife leaves you for your dog, the shoe factory shuts down and
you can't get your favourite shoes anymore or anything else that may or may not happen after using this script. Please make a FULL BACKUP, possibly from TWRP. You have been warned.
Click to expand...
Click to collapse
Hi guys, I edited the "framework-res.apk" file of XtreStoLite ROM adding Ambient Display feature like on Nexus (Android 5.0+). Surely it works on G920F, tested personally, if you wanna try on other S6 just try yourself.
I followed this guide. Credits to him.
///INSTALL:
- Flash the zip "AmbientDisplay-vX.X"
- Reboot
///UNINSTALL:
- Flash the zip "framework_restore"
- Reboot
Simple as it looks.
///BUGS:
- Gyroscope and proximity sensor not working for ambient display
- Touchscreen not working when screen fades (have to press power or home button first)
- Screen wake animation doesn't work (no fade)
- On edge model night clock won't work
- Every 3 dot menu animation will present a sort of lag/no animation
- Not working properly with Samsung "Good Lock" UI
///DOWNLOAD:
Each version I provide will be compatible ONLY with the one I write (example: ambient v3.3 --> xtrestolite v3.3)
- v3.3 installer
- v3.3 uninstaller
- v3.3.1 installer
- v3.3.1 uninstaller
///HOW IT WORKS:
- See attachments
Will it work if I pick the phone from pocket or from a tabel... or like the one from edgar?
Whats the battery consumption from this?
hasdroid said:
Will it work if I pick the phone from pocket or from a tabel... or like the one from edgar?
Click to expand...
Click to collapse
The screen fades but not works with gyroscope or proximity sensor, it just enables parts of code that Samsung deleted
Abdl said:
Whats the battery consumption from this?
Click to expand...
Click to collapse
Regular for me, not a problem
TENN3R said:
The screen fades but not works with gyroscope or proximity sensor, it just enables parts of code that Samsung deleted
Regular for me, not a problem
Click to expand...
Click to collapse
I understand... thank you ?☺
Works great! battery life won't be probably affected too much if not at all. Finally something satisfying on xda
Hmm there should be a bug using this mod for only those who has Edge . Night clock won't work by flashing this
Sent from my SM-G935F using Tapatalk
Repulsa said:
Hmm there should be a bug using this mod for only those who has Edge . Night clock won't work by flashing this
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Yeah and the lock screen wake animation not working too... menu animation too ?
PRESS THANKS BUTTON IF I HELPED YOU..??
Thanks for that feature, but some options to set the period and the time interval of the notifications would be nice.
Touchscreen is not working on ambient diyplay
Hi all, where can I activate this feature after having flashed the .zip?
downloading and will give it a try.
will this work on any other rom?
morostep said:
will this work on any other rom?
Click to expand...
Click to collapse
Im guessing, nope...
btw looking good but for now Im using Good Lock app and its not working properly with it.
peace \/
Can you make it for stock too?
ALBERTO9721 said:
Hi all, where can I activate this feature after having flashed the .zip?
Click to expand...
Click to collapse
Once you flash the zip it enables automatically, no "on-off" button.
sieerra said:
Can you make it for stock too?
Click to expand...
Click to collapse
There are lots of versions of stock rom, lots of different firmwares and I can't download every single firmware for extracting, decompile and recompile framework. So I just limit this mod for XtreStoLite.
Obliviously you can try adding yourself following the guide I linked in OP.
TENN3R said:
There are lots of versions of stock rom, lots of different firmwares and I can't download every single firmware for extracting, decompile and recompile framework. So I just limit this mod for XtreStoLite.
Obliviously you can try adding yourself following the guide I linked in OP.
Click to expand...
Click to collapse
I understand, thank you.
TENN3R said:
Once you flash the zip it enables automatically, no "on-off" button.
Click to expand...
Click to collapse
Thank you, now I've seen it
Will this work on g925f

Categories

Resources