Help - root/cwm and custom rom 2.2.1 - Galaxy Ace S5830 Q&A, Help & Troubleshooting

hi
Mine is froyo Galaxy Ace S5830, 2.2.1 , DDKQ1
how to install latest ICS custom rom?
do I need to upgrade to GB? if so how?
or can i directory upgrade from 2.2.1 to ICS?
post some simple steps to root and upgrade please :crying:

For rooting & unrooting use the my tutorial:
http://forum.xda-developers.com/showthread.php?t=1766178
Sent with my Evil GT-S5570 from Hell

If you want to flash CM9 you will need gingerbread.
There are 2 ways to upgrade, the official way and the unofficial way:
Official way: 1. Download 'Samsung kies'.
2. Plug in your ace.
3. Select upgrade.
Unofficial way: 1. Go to sammobile.com
2.Find the ace and your regions firmware.
3. Download the firmware + flashtool(Odin)
4. Load all the packages as shown in the flash guide.
5.Put the ace in download mode(power+vol down)
6. Connect ace and flash.
http://forum.xda-developers.com/showthread.php?t=1034145
Sent from my GALAXY Ace.

Since flashing ics cusrom like cm9 need clockworkmod and latest CWM only available for gingerbread so 1st of all you need
- upgrade your hh to gb
- root it
- instal latest cwm
- flash cusrom you wanted
Cmiiw dude
From my SGA ヽ(´▽`) ノ

Related

[Q] how to install CWM on ace 2.2.1 stock rooted plz help very urgent

hi all
can any1 tell me how to install recovery on ace 2.2.1 rooted device?
searched a lot but cudnt find?
any link or instructions wud be helpful
thanks.
You need to be on gingerbread to flash CWM 4/5(I recommend CWM 5 for no errors during flashing)
Download the latest gingerbread firmware for your Phone and flash through Odin and after that you can put CWM recovery onto your Ace.
Otherwise the Best solution is to flash Custom ROMs.
But you will need to be on Gingerbread to flash Most of the released Custom ROMs so better flash a gingerbread stock ROM through Odin and then you are good to go.
You can flash CWM v4 on Odin if you're on Froyo
"I have to go. It's just....they really need me." - Sora
http://forum.xda-developers.com/showthread.php?t=1551156
u can use this to root
shadowsiul said:
http://forum.xda-developers.com/showthread.php?t=1551156
u can use this to root
Click to expand...
Click to collapse
That is for GT-S5830C/i/M. Is no the same than: s5830/L/B
Get CF-Root adpation for Froyo, CWM 4 and Root.
Look in the all roms tweaks and kernels in the dev section

[Q] HOw to install original rom (CWM) and from where i can get that

by mistakenly i have installed PhilZ-cwm6-XXLSC-XJB-3.75-signed.
How can i remove that and how can i install original cwm for galaxy note GT-N7000.
plz help
shehrozjanjua said:
by mistakenly i have installed PhilZ-cwm6-XXLSC-XJB-3.75-signed.
How can i remove that and how can i install original cwm for galaxy note GT-N7000.
plz help
Click to expand...
Click to collapse
1. There is no such thing as "original cwm"
2. The one that comes with your device is called "Stock Recovery"
3. Now if you want stock recovery you have flash stock rom which in this case would be ICS 4.0.4
4.If you want to change your recovery you have to flash a different kernel as recoveries comes with kernels.
P.S. Dont flash stock ICS 4.0.4 kernel as it is unsafe.
If you want to flash Stock Rom ICS 4.0.4 follow this http://forum.xda-developers.com/showthread.php?t=1424997
XXLSC is a OTA update which one of the forum member (ThaiDai) got on his phone and has dumped for custom roms. XXLSA stock is available on samfirmware.com and it has the stock JB TW kernel,. if you want that... flash it using Odin..

[HELP] Flash JB on Galaxy S

Hi all, recently purchased used Galaxy S its GT-I9000
But i dont know how can i Flash JB rom on it currently running rooted GB 2.3.6 but with Stock Recovery no CWM
Can someone guide me how can i flash JB rom on it?
here is some info about phone with *#1234#
PDA: GT-I9000.VG26.1812
PHONE: M11OS.VD05.0140.ST
H/W: REVO.11
MOVINAND: SL26
Thanks
wana7262 said:
Hi all, recently purchased used Galaxy S its GT-I9000
But i dont know how can i Flash JB rom on it currently running rooted GB 2.3.6 but with Stock Recovery no CWM
Can someone guide me how can i flash JB rom on it?
here is some info about phone with *#1234#
PDA: GT-I9000.VG26.1812
PHONE: M11OS.VD05.0140.ST
H/W: REVO.11
MOVINAND: SL26
Thanks
Click to expand...
Click to collapse
which firmware version you are using?
XXJVU or JW4?
If you are on rooted 2.3.6 GB, you simply need to downlaod zip and gapps in this CyanogenMod 10.1 for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=2039755
switched off your phone then get in recovery .....to get in recovery mode switched on your phone while holding volume up and enter/middle button simultaneously
select wipe data factory reset
wipe cache paritions
then select chosse zip from sd card and install the zip of cyanogen rom and gapps you downlaoded from above link
thenn reboot..you will be on 4.2.2 custom rom with CWM
after that you can easily download any of JB Roms vailable in galaxy s android development section
Rajaasim1980 said:
which firmware version you are using?
XXJVU or JW4?
If you are on rooted 2.3.6 GB, you simply need to downlaod zip and gapps in this CyanogenMod 10.1 for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=2039755
switched off your phone then get in recovery .....to get in recovery mode switched on your phone while holding volume up and enter/middle button simultaneously
select wipe data factory reset
wipe cache paritions
then select chosse zip from sd card and install the zip of cyanogen rom and gapps you downlaoded from above link
thenn reboot..you will be on 4.2.2 custom rom with CWM
after that you can easily download any of JB Roms vailable in galaxy s android development section
Click to expand...
Click to collapse
i have rooted 2.3.6 but with stock recovery there is no CWM installed...
wana7262 said:
i have rooted 2.3.6 but with stock recovery there is no CWM installed...
Click to expand...
Click to collapse
dont worry when you will install the above files you will get CWM recovery
my phone was rooted on 2.3.6 and i did the above procedure and now i am running 4.2.2 with CWM
here is videos for guide
http://www.youtube.com/playlist?list=PLCFE2D0B98208BF4B
Sorry my Bad
Android Version is
2.3.4
Baseband: I9000ZSJPJ
wana7262 said:
Sorry my Bad
Android Version is
2.3.4
Baseband: I9000ZSJPJ
Click to expand...
Click to collapse
Check the videos i posted above
You need to upgrade to 2.3.6 jw4 then cf-root it and you can do the rest steps mentioned above..well thats what i did in three samsung phones and all went fine
Sent from my GT-I9000 using Tapatalk 2
Can i use these files
http://www.thehelptimes.com/how-to-install-android-4-0-ice-cream-sandwich-on-galaxy-s-i9000/
try cyanogenmod
wana7262 said:
Hi all, recently purchased used Galaxy S its GT-I9000
But i dont know how can i Flash JB rom on it currently running rooted GB 2.3.6 but with Stock Recovery no CWM
Can someone guide me how can i flash JB rom on it?
here is some info about phone with *#1234#
PDA: GT-I9000.VG26.1812
PHONE: M11OS.VD05.0140.ST
H/W: REVO.11
MOVINAND: SL26
Thanks
Click to expand...
Click to collapse
Try http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
Once done, u can install any custom rom. I will suggest u to try silm bean
I have done this multiple times, without any issue.
---------- Post added at 09:42 PM ---------- Previous post was at 09:38 PM ----------
wana7262 said:
Can i use these files
http://www.thehelptimes.com/how-to-install-android-4-0-ice-cream-sandwich-on-galaxy-s-i9000/
Click to expand...
Click to collapse
u can try, but better to use Cyanogenmod way, as that is tested and working. Also u will get lot of support or help from many developers around the world as cyanogenmod is used by lot of people.

I need help to root and install recovery to GT-I9070 with gingerbread

I need a little help can anyone show me the thread how to root this phone (GT-I9070) and install recovery .The phone has gingerbread from TELCEL México.I forgot to say can anyone show me the best custom rom Jelly Bean to install it on my phone.Thank you so much an waiting for the reply.
Edit:Compilation android: Gingerbread.UBLK1
Upgrade.....
You said you are on gingerbread, that is 2.3.6
While on 2.3.6 you can only install custom ROMs that are based on gingerbread.
If you want to install jelly bean or kitkat custom ROMs then upgrade to stock JB 4.1 via KIES or ODIN.
Here is a thread that can help you upgrade :
http://forum.xda-developers.com/showthread.php?t=2198341
sasank360 said:
You said you are on gingerbread, that is 2.3.6
While on 2.3.6 you can only install custom ROMs that are based on gingerbread.
If you want to install jelly bean or kitkat custom ROMs then upgrade to stock JB 4.1 via KIES or ODIN.
Here is a thread that can help you upgrade :
http://forum.xda-developers.com/showthread.php?t=2198341
Click to expand...
Click to collapse
The link given in the previous post has all the info for you.
1. You have to download a stock JB firmware. You can do it from sammobile.com/firmware
2. You have to download odin3 3.07 on your PC.
How to use odin
http://forum.xda-developers.com/showthread.php?p=33969186
3. Your PC must have SAMSUNG android mobile phone drivers installed. You can google for it. Another way is to install samsung kies. Installing kies will install the drivers by itself.
4. Now flash the downloaded firmware (in the zip archive there is a tar archive) by odin3 tool.
4. After you have successfully flashed JB now you want to root your device. Download a tiny root.zip file by shaan from this link.
http://forum.xda-developers.com/showthread.php?p=36406378
Keep it on the sd card of the device. ...
As for custom ROM you can begin with HarshJelly because it is very stable and everything works on it. And for kernel&recovery CoCore 8.6 with CWM.
Sent from my GT-I9070 using Tapatalk

update froyo galaxy ace

i have a galaxy ace with froyo i wANT TO UPGRADE TO GINGERBREAD CAN I USE ODIN 1.85 FOR IT AND IS IT OK IF I DONT HAVE THE OPS FILE?
bhavstech said:
i have a galaxy ace with froyo i wANT TO UPGRADE TO GINGERBREAD CAN I USE ODIN 1.85 FOR IT AND IS IT OK IF I DONT HAVE THE OPS FILE?
Click to expand...
Click to collapse
ops file is necessary and use the latest odin available for ace
also bro if you find all this confusing use kies to update your ace via pc
aditya rathee said:
ops file is necessary and use the latest odin available for ace
also bro if you find all this confusing use kies to update your ace via pc
Click to expand...
Click to collapse
actually there is som problem in the usb port in the phone can you giv me a link for cwm for froyo
bhavstech said:
i have a galaxy ace with froyo i wANT TO UPGRADE TO GINGERBREAD CAN I USE ODIN 1.85 FOR IT AND IS IT OK IF I DONT HAVE THE OPS FILE?
Click to expand...
Click to collapse
Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
If your PC cannot recognize the phone, its usually the drivers. Once installed, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Here is the link to the CWM4 for Froyo
ClockWorkMod 4.0.0.9 for Samsung Galaxy Ace Froyo
Hope I Helped
bhavstech said:
actually there is som problem in the usb port in the phone can you giv me a link for cwm for froyo
Click to expand...
Click to collapse
buddy you are saying that you want to update your froyo to gb then why are you asking for cwm right now with it you cannot flash stock gb on your ace
and you can do that only through kies or odin
cwm will help you flashing scripts custom roms and rooting not flashing stock rom
sharingan said:
buddy you are saying that you want to update your froyo to gb then why are you asking for cwm right now with it you cannot flash stock gb on your ace
and you can do that only through kies or odin
cwm will help you flashing scripts custom roms and rooting not flashing stock rom
Click to expand...
Click to collapse
actually i wanted to update to gb so that rooting and cwm becomes easy and to install cm10.1 its done no i thought there is problem with use post in the phone so i was finding cwm for froyo but actually the problem was with odin so i wasnt able to flash stock gb but now its done
bhavstech said:
actually i wanted to update to gb so that rooting and cwm becomes easy and to install cm10.1 its done no i thought there is problem with use post in the phone so i was finding cwm for froyo but actually the problem was with odin so i wasnt able to flash stock gb but now its done
Click to expand...
Click to collapse
Glad to hear it worked

Categories

Resources