Database Develop

[Q] How to root galaxy note GT-N7000BDULB3 version

Hello xda developers
I am wondering if someone can answer a few questions i have about rooting my samsung note?
I'm in Australia and just got my note with vodafone on Saturday. I have been doing some searching in the dev section and I haven't found my kernel version (2.6.35.7-N7000BDULB3-CL977082) to download from dr.ketan I have also searched for it on sammobile.com with no luck also.
So from the above statement does anyone know where i can get a copy of it from or know how i can backup mine from my phone atm?
I have found a root solution however It is for the GT-N7000 model which is at rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall
If I followed this above method would I end up bricking the phone as the phone version are different? I found nothing on a search when comparing the two
Sorry for an the essay of a post too.

Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.

chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
Thanks for your help I will try it as soon as I get some more free time.

I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
raj says:
March 26, 2012 at 9:42 pm
Thanks so much, and your posts are one of the easiest to follow and gives a great head start for noobs! Great Job really!
I used this method and now I see a yellow triangle.
1. Will this yellow triangle during boot up, disappear if I follow your unroot method?
2. Will my phone can be updated to ICS once Samsung officially provides upgrade to ICS for Galaxy Note?
3. I tried SetCPU, the phone became very hot, when I over clocked and it just hang. I brought it back to normal.
4. What are all the other useful, important things we can do after root, other than installing Titanium Backup etc.
Click to expand...
Click to collapse
So just follow what chasmodo have advised you.

dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Thanks for all the input really appreciated, will let ya know how i go on the weekend when i have some time to do it

chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
This might be a stupid question chasmodo so bare with me.
With the KKA firmware when extracted I get the 2 files like you said the .tar.md5 and the dll file.
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.

mattybxda said:
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.
Click to expand...
Click to collapse
Just load .tar.md5 in PDA and you're good to go.

chasmodo said:
Just load .tar.md5 in PDA and you're good to go.
Click to expand...
Click to collapse
Just tried it and it FAILED please help?

mattybxda said:
Just tried it and it FAILED please help?
Click to expand...
Click to collapse
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.

mattybxda said:
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.
Click to expand...
Click to collapse
Didnt work guys , any ideas on what i can do now.

dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?

mattybxda said:
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?
Click to expand...
Click to collapse
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."

chasmodo said:
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."
Click to expand...
Click to collapse
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?

mattybxda said:
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?
Click to expand...
Click to collapse
Yeah...try a different PC Odin version if it fails again.

chasmodo said:
Yeah...try a different PC Odin version if it fails again.
Click to expand...
Click to collapse
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.

mattybxda said:
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.
Click to expand...
Click to collapse
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).

chasmodo said:
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).
Click to expand...
Click to collapse
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?

mattybxda said:
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?
Click to expand...
Click to collapse
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?

chasmodo said:
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?
Click to expand...
Click to collapse
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?

mattybxda said:
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?
Click to expand...
Click to collapse
Don't know what else to suggest at this point. I'd leave it as it is and wait for Dr. Ketan to bail you out.
@Dr. Ketan:
Mum, help us, we're stuck here!

[Q] Lost IMEI

Guys , i'm on XXJVU right now and i have lost my imei and it is 004.. something. I came to know this is fake after some research. I was on cm10 and had a corrupt imei so i flashed XXJVU but still problem persists. I have no backup right now. Any help guys ?

Necro Guy said:
Guys , i'm on XXJVU right now and i have lost my imei and it is 004.. something. I came to know this is fake after some research. I was on cm10 and had a corrupt imei so i flashed XXJVU but still problem persists. I have no backup right now. Any help guys ?
Click to expand...
Click to collapse
What do you mean by "this is fake"?

When you restock via odin with the 3parted Stock ROM and 512 pit, repartition ticked, then your IMEI should be back again. Flashing "only" the rom.zip via CWM does not solve it most of the times.
btw: he meant the 004xxxx imei is a fake. This will be included automatically to the abot phone info when you lost your "real" imei.

rodman01 said:
When you restock via odin with the 3parted Stock ROM and 512 pit, repartition ticked, then your IMEI should be back again. Flashing "only" the rom.zip via CWM does not solve it most of the times.
btw: he meant the 004xxxx imei is a fake. This will be included automatically to the abot phone info when you lost your "real" imei.
Click to expand...
Click to collapse
Just did but still no imei :crying:
Should i flash back to froyo/eclair with repartition ticked ?

mmh strange....did you used and original stock firmware from samsung?
You can also try it with slappys rescuepack, which i always use, when i have or want to restock. Has all you need in that zip. and also a todo or guide.
Perhaps ou give it a try?
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2

rodman01 said:
mmh strange....did you used and original stock firmware from samsung?
You can also try it with slappys rescuepack, which i always use, when i have or want to restock. Has all you need in that zip. and also a todo or guide.
Perhaps ou give it a try?
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
Click to expand...
Click to collapse
Yes was using official firmware (XXJVT).
ok.. gonna give it a try will report soon.

rodman01 said:
mmh strange....did you used and original stock firmware from samsung?
You can also try it with slappys rescuepack, which i always use, when i have or want to restock. Has all you need in that zip. and also a todo or guide.
Perhaps ou give it a try?
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
Click to expand...
Click to collapse
still not working.my imei is still 00049..
Is there any way i can find my phone's original imei ?

Yes, if you pull your battery out, then there you will find a label sticked onto the cover. And this will show you your IMEI. But you cannot just type it in somewhere, thats not possible.
And i am wondering and its really strange, that after flashing a stockfirmware or that rescue pack you do not get your IMEI back ?
For me it worked every time....did you led phone boot through after first reflash and pass the setup wizard? Or did you just flashed something on top? Customsoftware or else?

Flashed Germany 4.3 Stuck on Samsung Screen

Hello Guys i flashed the Germany Version of 4.3 lte last night and in doing so i have Temporarily killed my Phone.
I have tried all the Recoveries processes via Kies and Odin and i am having no luck.
I think the reason why it won't flash is because the Germany 4.3 is a Newer Version than the Stock 4.1.2.
When i'm in Odin i get sboot.bin Fail when trying to Flash the Latest Stock rom. I am able to Flash the Germany 4.3 again and that flashes but then the Phone Stays on the Samsung Flash Screen.
Could someone please Help? I have been on with this for Hours now. I think what i need is a 4.3 Version of any rom in Odin .tar format so i can at least get the phone to boot up and then maybe i can get CWM Recovery on there and flash a Stock rom that way.
Thanks in Advance

You have to remove sboot.bin and tz.bin when downgrading. Be careful, downgrading will give you Knox warranty void 0x1!
Sent from my GT-I9305 using xda app-developers app

.NetRolller 3D said:
You have to remove sboot.bin and tz.bin when downgrading. Be careful, downgrading will give you Knox warranty void 0x1!
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I have already seen that Message in Tiny Writing. What does that mean if i get that and how do you remove sboot.bin and TZ.bin
Do i remove them from the Stock 4.1.2 or the Germany 4.3?
My head is well and truely done in. I was up till 5am trying to fix it and then when i woke i went straight back to it and i still havn't got it working.
Thanks for your help in advance.

marti4578 said:
I have already seen that Message in Tiny Writing. What does that mean if i get that and how do you remove sboot.bin and TZ.bin
Do i remove them from the Stock 4.1.2 or the Germany 4.3?
My head is well and truely done in. I was up till 5am trying to fix it and then when i woke i went straight back to it and i still havn't got it working.
Thanks for your help in advance.
Click to expand...
Click to collapse
I am in the same boat if u found a solution help me also
Currently i flashed philz recovery upon which i have flashed tgp 11.30 but have no imei baseband.

marti4578 said:
I have already seen that Message in Tiny Writing. What does that mean if i get that.
= warranty void and no way so far to remove the count .
Click to expand...
Click to collapse

AMoizK said:
I am in the same boat if u found a solution help me also
Currently i flashed philz recovery upon which i have flashed tgp 11.30 but have no imei baseband.
Click to expand...
Click to collapse
Have you got any efs backup made by yourself? Or have you ever used boeffla kernel or any other that backups efs partition?

Hbohd said:
Have you got any efs backup made by yourself? Or have you ever used boeffla kernel or any other that backups efs partition?
Click to expand...
Click to collapse
Hello I don't have any EFS Backups done by Myself and i have never used Boeffla Kernel or any other Backup. I am so at my Witts end it unreal.
I have tried to do Kies recovery and i am back at the Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and Try again.
I have no idea which way to go or what to do. I know it will be fixed but i have little Faith at the Moment.
Thanks for your help in advance.

marti4578 said:
Hello I don't have any EFS Backups done by Myself and i have never used Boeffla Kernel or any other Backup. I am so at my Witts end it unreal.
I have tried to do Kies recovery and i am back at the Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and Try again.
I have no idea which way to go or what to do. I know it will be fixed but i have little Faith at the Moment.
Thanks for your help in advance.
Click to expand...
Click to collapse
THE kies frimware intilition doesnt work as you have 4.3 bootloader and knox blocks older boot loader
dont worry when 4.3 becomes available in your area it wont have to downgrade and ultimately this method will work but still things are looking pretty bad dor the intermediatory days.
PS is ther anyway to restore baseband imei without any backup

AMoizK said:
THE kies frimware intilition doesnt work as you have 4.3 bootloader and knox blocks older boot loader
dont worry when 4.3 becomes available in your area it wont have to downgrade and ultimately this method will work but still things are looking pretty bad dor the intermediatory days.
PS is ther anyway to restore baseband imei without any backup
Click to expand...
Click to collapse
What if i download the Germany Version again and try flashing. I thought it would of worked? I am now in this situation surely the Country it comes from wouldn't make a difference? Could someone take the Germany 4.3 and make it a Working Version .tar file to flash with Odin3?

marti4578 said:
What if i download the Germany Version again and try flashing. I thought it would of worked? I am now in this situation surely the Country it comes from wouldn't make a difference? Could someone take the Germany 4.3 and make it a Working Version .tar file to flash with Odin3?
Click to expand...
Click to collapse
I ment through kies.

Hello Guys i have Fantastic News!!
I have no idea what i did different, However i have reflashed the German 4.3 on my GT-I9305 and this time to my Total Surprise it worked!!
I wish i could say what i did and it worked but i have absolutely no idea what was done differently.
Thanks all for your Help.
I will say i installed the drivers manually and just on the off chance i flashed it again with the file i downloaded last Night. I also flashed a recover trying to get it to load a recover so i could flash a zip file.

marti4578 said:
Hello Guys i have Fantastic News!!
I have no idea what i did different, However i have reflashed the German 4.3 on my GT-I9305 and this time to my Total Surprise it worked!!
I wish i could say what i did and it worked but i have absolutely no idea what was done differently.
Thanks all for your Help.
I will say i installed the drivers manually and just on the off chance i flashed it again with the file i downloaded last Night. I also flashed a recover trying to get it to load a recover so i could flash a zip file.
Click to expand...
Click to collapse
Which file can u specify pls and also which recovery also is wifi and data working

AMoizK said:
Which file can u specify pls and also which recovery also is wifi and data working
Click to expand...
Click to collapse
which file????:crying:

AMoizK said:
which file????:crying:
Click to expand...
Click to collapse
Please read the rules .

JJEgan said:
Please read the rules .
Click to expand...
Click to collapse
Can u point me to the rules

AMoizK said:
Can u point me to the rules
Click to expand...
Click to collapse
http://forum.xda-developers.com/announcement.php?f=256
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)

Finally
I am so feeling sucessful right now although i didnt got 4.3 but i was sucessful in getting my imei and baseband and network back.:good:

Sorry for the late response but when you get stuck on the Samsung boot screen all you have to do is boot into Recovery and do a Factory Reset and Wipe Cache.
Another thing to remember is to flash the modem for your country otherwise you might accidently disable some frequencies and enable other useless ones.

xkwizt said:
Sorry for the late response but when you get stuck on the Samsung boot screen all you have to do is boot into Recovery and do a Factory Reset and Wipe Cache.
Another thing to remember is to flash the modem for your country otherwise you might accidently disable some frequencies and enable other useless ones.
Click to expand...
Click to collapse
Doesn't work I will syill be stuck at boot screen

AMoizK said:
Doesn't work I will syill be stuck at boot screen
Click to expand...
Click to collapse
Which 4.3 update did you flash? I used the DBT German one.
Did you flash the right modem too? It worked for me and i was using a i9305T. All i did was flash the latest modem (from the brand of phone i have which is Telstra) and did a wipe data and wipe cache.

[Q] My galaxy S4 active sgh-i537 is soft bricked, need help

My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.

lavorno said:
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
Click to expand...
Click to collapse
Do you have CWM installed?

tiskael said:
Do you have CWM installed?
Click to expand...
Click to collapse
no

lavorno said:
no
Click to expand...
Click to collapse
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?

tiskael said:
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
The problem with your S4A is that it has a locked bootloader, so you can't flash firmware yourself, sorry!
Click to expand...
Click to collapse
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.

lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
If you don't want to go to Best Buy right away you can try flashing the firmware yourself.
http://forum.xda-developers.com/showthread.php?t=2629093

If you took the official OTA for 4.3, ML2, there is no known root exploit available. Odin is easy to flash with - there are 1 clicks that do all the hard work for you, all you have to do is put your phone into download mode and the app does the rest on your PC. Make sure you have the proper drivers installed. Best way I found was to download the software suite from Samsung for the phone. Without the proper drivers Odin won't see the phone (I found this out the hard way.)

lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.

lavorno said:
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
Click to expand...
Click to collapse
No worries, I heard they were pretty good in the US. Remember though, you can't root it on 4.3 (yet). If they've set it back to 4.2.2 then you can root again and not update to 4.3. If they've set it to 4.3 then either you will have to follow @Devo7v's instruction to flash back or wait it out as a root method is currently being worked on.

Bricked SGH i537
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........

Shabnur said:
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Click to expand...
Click to collapse
What firmware were you originally on.

Devo7v said:
What firmware were you originally on.
Click to expand...
Click to collapse
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......

Shabnur said:
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Click to expand...
Click to collapse
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.

Devo7v said:
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Click to expand...
Click to collapse
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....

Shabnur said:
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Click to expand...
Click to collapse
The MD5 is sort of like the fingerprint for the file, so you need the MD5 of the file you downloaded to match the MD5 that was posted in the thread. Download WinMD5Sum from the website here. Under File Name load the ML2 Odin zip package that you downloaded. WinMD5Sum will generate the MD5 of the file you downloaded and you can compare that to the MD5 the uploader posted in the thread. If the MD5's match then that means you downloaded exactly what was posted. If the MD5's don't match exactly, then you have a corrupted download and need to download it again.

[Q?] URGENT Help with Soft Brick!!

Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.

Icarusu said:
Help me out guys i really need save my phone.
i have been trying to update my 2.3.6 to 4.3 (Jellybean) through Odin since I always got some weird stopping at 69% on Kies, but i seemed to fail on odin, Odin was failing to do it so i tried other odin ver and got stuck on the ''NAND Write Start'' thing, i exited odin and then tried something else i'm very stupid so i used a pit for the wrong version of my android to..help in whatever it was i dont remember, together with the ROM.
i didn't check if my phone was aleadry bricked after i force closed odin in patching in the first time so i don't know the root of the problem.
and i don't know if this is Soft or full brick but i get stuck at Firmware Upgrade encountered a issue, Kies does not help in it when i type the cellphone info into that option, it gives me a error so no way through kies. i didn't do any way yet to try to save it i'm really unsure what to do i checked really a bunch of different posts so its really confusing, i really get in panic when stuff like this happens so forgive me, i hope anyone can help in somehow, also, if better i need to save it in a way without having to wipe my stuff because most of my apps data are in the phone, but i dont mind if theres no other way than using wiping in one of the steps.
i don't really know how to follow if you link me over a thread so its better if you post the explanation here.
Click to expand...
Click to collapse
if better i need to save it in a way without having to wipe my stuff
Click to expand...
Click to collapse
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?

shut_down said:
You must do factory reset when you go from GB to JB. That is why you get a bootloop probably.
So to make it short situations is like this:
1. You had problem with Kies
2. Tried with Odin and got force close of odin in Windows?
3. Retry with Kies with same ending
So what Windows do you use? Do you use 8? I read some had problem with Odin and 8.x. Did you use Odin 3.0.x?
Click to expand...
Click to collapse
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)

Icarusu said:
Yeah, forced closed odin 2 times, kies like stopped and disconnected everything on 69% leaving only the android on downloading screen but that didnt brick it, i use windows 7, odin 3.09 only gave me fails so i used 3.07 where it got stuck on nand thing.
also, any ways to backup things even though the thing is bricked? i can go to download mode fine and i think i can go into recovery too (never tried it on this phone)
Click to expand...
Click to collapse
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.

shut_down said:
Your internal data (on internal SD) will be there, but Factory reset will delete your apps and its data.
Or try to flash GB with ODIN and see what happens.
Click to expand...
Click to collapse
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?

Icarusu said:
ehh give me a tutorial of what to do to unbrick it. i really need unbrick it. its a soft brick or full brick?
Click to expand...
Click to collapse
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?

shut_down said:
It is probably soft, you can go to Odin. Way to unbrick it is to flash stock firmware with Odin - like you did. Find GB firmware and flash it with odin like you did.
http://forum.xda-developers.com/showthread.php?t=1985398
If your phone is I9070 then use firmware for I9070, if it is I9070P use I9070P firmware. If you miss this you will hardbrick phone, and not be able to use Download mode.
And do not use Hong Kong firmware.
sammobile.com and samsung-updates.com are sites where you can find firmwares.
You were on custom ROM when you did update with Kies?
Click to expand...
Click to collapse
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?

Icarusu said:
no i wasnt
also
any of those are of my region does it matter? will i get stuck in nando writing if i try this with a GB firmware?
Click to expand...
Click to collapse
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...

shut_down said:
Use region next to you, I am using Italian and I am from Serbia. I do not know if you will get nand write error, you should not get it in first place. Maybe something is wrong with it...
Click to expand...
Click to collapse
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?

Icarusu said:
Hm, alright i'll use one firmware
but what if i get the nand thing and has to force close odin again? will i get fullbrick?
Click to expand...
Click to collapse
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?

shut_down said:
I am not 100% sure about that. Maybe try other ODIN versions. But I used 3.0.7 without problem. Search for nand write problem to see what is it about.
P.S. Redownlaod firmware maybe, is it the same size as shown on the page when you started download?
Click to expand...
Click to collapse
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.

Icarusu said:
Yeah um it was, as i said Odin 3.09 only failed while 3.07 got stuck in nando. isnt there someone that knows about that nando thing? i readed alot but i dont think i can really find a good answer.
alright so, downloaded a 2.3.6 firmware, i download which odin? i do need download that ''odin tools'' from that link you linked me ? because it has a very old ver of odin but skipping that it has a PIT file that i dont really know what it is for.
Click to expand...
Click to collapse
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.

shut_down said:
Sorry, use this for downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
I think no matter what Odin. I used 3.07 without any problems so far.
Click to expand...
Click to collapse
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?

Icarusu said:
downgrade? i was updating from 2.3.6 to Jelly bean when i bricked. i dont know if i even got to jelly bean when i bricked.
jumping to a downgrade subject of sudden is abit weird..i was just going flash it with the same version of my android and see if it would work.
do i need really to folow that method or i can keep going and flash it how you told me to?
Click to expand...
Click to collapse
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.

shut_down said:
Follow the whole procedure from that thread. Except the part of 16GB version, if you do not have one.
Click to expand...
Click to collapse
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.

Icarusu said:
alright i'll do it just tell me if theres any way to backup my storage from my soft bricked cellphone because some of my stuff was in the internal storage.
Click to expand...
Click to collapse
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).

shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
mm tried adb well it dont detect it since its bricked it only turns off android to the firmware upgrade screen thing. well i'll use the method now. wish me luck

shut_down said:
I am not sure if that method formats internal storage. And if you get adb shell you could do it with command or with total commander with adb plugin (for that go to my profile, to all threads I started and you will see one about it).
Click to expand...
Click to collapse
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?

Icarusu said:
Oh, well it worked, thanks.
still, its all gone now but i can install each app again, there wasn't much important things that i lost.
well since its normal again but without nothing, when i decide to try update it again which way you would recommend me off? i mean, a really good one that isnt by Kies?
Click to expand...
Click to collapse
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.

shut_down said:
Odin. Like you did now, just with JB firmware for your I9070 model (P or non P, if you miss that you will hard brick, for example if you flash P firmware on non P phone, and otherwise).
Just follow this http://forum.xda-developers.com/showthread.php?t=1985398
Simple as - put firmware in PDA, hit flash. And check if you have unchecked/checked as it is written there.
Probably Kies was the problem, because that nand write error. He messed up, and now this fixed it.
Click to expand...
Click to collapse
mmm. alright so i should get the jelly bean firmware from that website then use it on odin as its listed. should i use the odin listed in that thread or any ver. will do? any region will work?