I'm planning to upgrade to a 16GB from my current 8GB microSD which I EXT4'd a WHILE back using gParted.. I think.
I've lost all sense of knowledge on this topic since I've only done it once.
Has there been an easier way to do this nowadays now that even rooting methods have been simplified to a click of a button?
Or need I go through the whole gParted boot disk again? (Need to find a tutorial for that too again...)
Also, is there a way I can do it on my OSX?
My Windows is always available on my other laptop but I was just wondering if there were any methods to do this procedure on OSX.
Thanks bunch
Appreciate it.
If you are rooted, you can partition from 4ext recovery. It's the easiest & best method. Dunno about Mac OS, but since it is also Unix based with a journalled file system, it must have support for ext fs. Better make a backup of card on pc before resizing your FAT32 partition, though.
Sent from my HTC Incredible S
Ah yeah, I'm def rooted and S-Off'd so I guess that would be fine.
Related
So i ordered a new Class 6 SD Card.
Before this i was on the stock 1GB SD card that came with the G1 with an ext2 partition, and running the latest Cyan mod.
Basically i was just wondering what i need to do when my new card comes. I know i need to partition it to FAT32, and then i was gonna do ext3, and a linux swap. Can i just use sdparted script to do this?
And finally i was gonna try a Hero rom now that i have the SD card that is actually capable of running it. I push it with adb and just flash after partitioning, right?
Is there any way of getting my apps back or am i going to have reinstall everything again? I don't REALLY mind doing all over again, but it'd be nice not to have to. And if it's possible, how?
Thanks for any help/clarification...
dear ally,
there is a app that allows you to back up apps..
p.s. i apologize im not a native speaker..of how do u say..umm ur motherlan
Yes.
First re-partition the card using parted from the recovery menu or using the Amon-Ra Recovery. There are instructions for that littered everywhere in the Q&A and the Developer's forum, just use the search.
To use the Hero ROMs you need to flash the Danger SPL unless you plan on using MicroHero with HardSPL. If you want to use any of the new Hero ROMs they will require the Danger SPL and note the bold. Look up the proper instructions for flashing the SPL before actually diving in.
And no. You don't need to re-install everything. Just use switchrom or BART to make a backup as it will also make a backup of your ext partition. After backing up, just restore it after transferring everything from the FAT32 partition of your old sdcard to the new one.
I just checked and i have 1.33.2005 SPL. I believe that's the correct one, right?
I just tried to push Bart to system/sd...i'm pretty sure i did it right but when i try to store my ext it says it can't open the file.
What am i doing wrong?
Check this out
Basket Lotioner said:
Check this out
Click to expand...
Click to collapse
Thank you very much...that seems to have worked
I really like this recovery image too
No problem man, glad to have helped.
Download Amon_Ra's new recovery image and look for the 3 way partition option...once partioned, do a data wipe, drag and drop your rom of choice in .zip format onto the root of your sd card and rename it to "update"
Backup for Root users works well for restoring your apps. it can be found in the marketplace. I believe there is a donate version and a free version.
subj: are you gonna include good old apps2sd in your 2.2-based custom roms, or are we stuck with the new fancy apps2fat?
thanks
I hope so the new apps2fat kinda sucks
-------------------------------------
Sent via the XDA Tapatalk App
why does it suck? surely its no real difference? both are stored on the sd card and im not sure I am right but you dont need the ext partition now?
am i missing something?
ryl3y said:
why does it suck? surely its no real difference? both are stored on the sd card and im not sure I am right but you dont need the ext partition now?
am i missing something?
Click to expand...
Click to collapse
As devs update their apps to take advantage of and work with the new features I think the offical way will be fine.
Only real drawback I can see right now tho as compared to the apps2sd we are used to is the fact the apps are now on the FAT32 partition. This means anything you have moved to SD will not be available while your phone is mounted to PC via USB cable. That's the biggest advantage to the "older method" with it's EXT partition, so you could mount your phone to pc and still use the apps that are on your sd card. This simply will not be possible with the official method.
gIMpSTa said:
As devs update their apps to take advantage of and work with the new features I think the offical way will be fine.
Only real drawback I can see right now tho as compared to the apps2sd we are used to is the fact the apps are now on the FAT32 partition. This means anything you have moved to SD will not be available while your phone is mounted to PC via USB cable. That's the biggest advantage to the "older method" with it's EXT partition, so you could mount your phone to pc and still use the apps that are on your sd card. This simply will not be possible with the official method.
Click to expand...
Click to collapse
this
AND for me the biggest advantage of app2sd was the ability to do a painless wipe (to change different roms for ex.). Im not sure it will work same way with fat.
Hi, im using Modaco's gr5 rom and HP RC9 Kernel, and i want to be able to format my internal SD card in Ext2, Ext3 or Ext4 because i need to be able to handle symlinks, can this be done? what would be the procedure?
Thanks in advance.
It should be done but you will no longer able to use your sdcard on windows
Sent from my LG-P990 using Tapatalk
Should be easy to make a .zip that converts it in recovery, but you'd need to do some mount point tweeking before you could use it.
Just used either a Linux computer and its Gparted software, or if you have a windows computer, search for Gparted Live CD.
Yes, i know how to convert it, i have Debian, Ubuntu and Mint installed along with Win7 on my laptop so the convert process is no problem, but, what should i do to make the phone recognise it? where do i make the mount point? /etc/fstab is not present, i don't know how to do it the Android way =/
You'll have to modify /etc/vold.fstab.
You can inspire yourself of the different mods that change sdcard mounting, see in dev or app section.
Striatum_bdr said:
You'll have to modify /etc/vold.fstab.
Click to expand...
Click to collapse
Thanks! i'll try that
I have my phone unlocked and rooted and have used Big Bear's Iconic rom to flash my phone. This completed fine but part of the process after flashing describes flashinf with data2sd ext3 script. When i tried this I realised my sdcard was formatted fat 32 and not ext3. My desktop machine uses ubuntu linux and I wondered if its possible to format the card via terminal or some piece of software and in what proportions should i partition it to extend my salsa's pitiful internal memory. Also when this is done does the script need to be on a particular partition or just somewhere on the card.
If its easier to configure the card via windows I also have a winxp laptop that could do the job.
Any help greatly appreciated.
bean12345 said:
I have my phone unlocked and rooted and have used Big Bear's Iconic rom to flash my phone. This completed fine but part of the process after flashing describes flashinf with data2sd ext3 script. When i tried this I realised my sdcard was formatted fat 32 and not ext3. My desktop machine uses ubuntu linux and I wondered if its possible to format the card via terminal or some piece of software and in what proportions should i partition it to extend my salsa's pitiful internal memory. Also when this is done does the script need to be on a particular partition or just somewhere on the card.
If its easier to configure the card via windows I also have a winxp laptop that could do the job.
Any help greatly appreciated.
Click to expand...
Click to collapse
yeah it would be easier via windows, i still not found software on Ubuntu to do the partitions lol.
just copy the data2sd-ext3.zip onto your sd card that's all and flash from there. you only need a small 1gb partition max on the sd cad the rest in fat32.
Cool will give that a try tomorrow and let you know how it goes
Worked a charm thanks I do have a couple of question though if i may. Although working with no probs the script mentions preparing the partition with ext2 (I used ext3) and an app called busybox to be installed into system/xbin. What does this app do and is it needed.
Also is this script tailored to the salsa or can it be used on other android devices to achieve more internal memory?. My Desire has the same issue you see.
Thanks in advance for all the help
Yes busybox is requiredlol, otherwise it wouldn't work. We never changed the txt over from ext2 but its still the same and works on both anyway. As for desire....I have no idea, this was based on wildfire s/salsa only, try it out see what happens lol
Busybox is part of the superuser setup without this builtin or added in we wouldn't have root at all. Deleting it would cause issues too.
BigBear is using Xparent Tapatalk Purple
Busybox is part of the superuser setup without this builtin or added in we wouldn't have root at all
Click to expand...
Click to collapse
So given my phone is rooted (thanks to your help a few weeks ago) I take it I must already have this Busybox installed otherwise the script would have failed correct?
I partitioned my test 1 gig sd card into two equal parts one ext3 and one left fat32, the phone reports equal portions on sd card and internal memory via the Settings----> Storage menu. So I'm assuming all is well.
Yeah busybox will already be there lol. That's all fine on the SD, but just be aware, the lower the class SD your using, I assume its a 2gb, you may have a class 4, which will lag. If you experience lag, reduce the ext3 size to 500mb you will see a difference.
BigBear is using Xparent Tapatalk Purple
Is there any difference between data2sdext3 and data2whatever? If yes which one is better to flash with a custom ROM (I am using Bear's XSeries V11).
(Data2ext3 is causing problems for me. Crashing various apps time to time. Using a class 4 sdcard with 470 MB partition. Found data2whatever on Razer's ROM page)
razasohail said:
Is there any difference between data2sdext3 and data2whatever? If yes which one is better to flash with a custom ROM (I am using Bear's XSeries V11).
(Data2ext3 is causing problems for me. Crashing various apps time to time. Using a class 4 sdcard with 470 MB partition. Found data2whatever on Razer's ROM page)
Click to expand...
Click to collapse
A big difference between them.data2SD ext3 is designed for non apps2SD roms ie mine, data2whatever is for apps2SD roms only.if you're having force close issues then you didn't install something correctly. Using these scripts on the wrong Rom could have adverse affects in the Rom.
Each Rom made will have the correct script to use in the listing. If you choose to use them the opposite way round then the developer won't help you correct the problems I'm afraid, all I can suggest is redo the Rom of your choice till it works correctly.
If your having problems with mine, post up in the thread as long as your using the setup I gave and I'll help as much as I can.
For force close issues you can always use fix permissions in Rom manager or in recovery advanced section, this normally stops them.if it dont reinstall them Rom. It tends to be a user error when this happens, I'm using my own Rom and never get force close problems.
BigBear is using Xparent Tapatalk Purple
I would like to repurpose my N1 as a little WiFi capable storage device. I have been combing the internet for solutions and tried a few things. I can't seem to get a combination of android OS partition scheme and file system to accomplish this. Can somebody point me in the right direction. I am not picky about any of the details but it would be nice to be readable from windows. I am currently messing around with ext4 and using ext2fsd but I am not really getting anywhere.
Thanks if u can help me out
dasbooter said:
I would like to repurpose my N1 as a little WiFi capable storage device. I have been combing the internet for solutions and tried a few things. I can't seem to get a combination of android OS partition scheme and file system to accomplish this. Can somebody point me in the right direction. I am not picky about any of the details but it would be nice to be readable from windows. I am currently messing around with ext4 and using ext2fsd but I am not really getting anywhere.
Thanks if u can help me out
Click to expand...
Click to collapse
You can flash a custom ROM (I recommend Evervolv KitKat) and use a2sd. Then you'll have up to 32 G on the external sdcard (which becomes a virtual "internal" sdcard.
Sent from my Nexus One
PhilipTD said:
You can flash a custom ROM (I recommend Evervolv KitKat) and use a2sd. Then you'll have up to 32 G on the external sdcard (which becomes a virtual "internal" sdcard.
Sent from my Nexus One
Click to expand...
Click to collapse
Hey thanks I already had a custom rom going with jelly bean and have a ext4 partition with a2sd install but it to make it visible even to linux seems to be a challenge and I dont know why. I also seem to get errors when downloading files bigger than 4gb which makes no sense. I dunno maybe i should get an otg card reader and put the old 4gb back in the phone and put the 32 gb in the card reader and use paragon software. Any body think this might work or have another suggestion.
dasbooter said:
Hey thanks I already had a custom rom going with jelly bean and have a ext4 partition with a2sd install but it to make it visible even to linux seems to be a challenge and I dont know why. I also seem to get errors when downloading files bigger than 4gb which makes no sense. I dunno maybe i should get an otg card reader and put the old 4gb back in the phone and put the 32 gb in the card reader and use paragon software. Any body think this might work or have another suggestion.
Click to expand...
Click to collapse
How about partitions sizes?
Sent from my Nexus 5
PhilipTD said:
How about partitions sizes?
Sent from my Nexus 5
Click to expand...
Click to collapse
Thnks again, The fat 32 partition is aprox 6gb and the ext4 partition is aprox 22gb so ya the ext4 is much bigger than the fat32 but that is what would make it practically useful. Right now I seem to be getting i/o errors around the 4 gb size area of a torrent? for a vmware image of a linux distro.