Related
Hi all,
Sorry to ask this but with all the various firmware versions I am confused about which is a good Rooting program for the Official JPO Froyo release. Can someone point me in the right direction?
Thank you in advance
search is your friend.
Sent from my GT-I9000 using XDA App
CF root using Odin
Sent from my GT-I9000 using XDA App
Actually I have the same question as was confused about which method to use as well. My phone is JPO/JPP/JP3. I have searched but all the root methods I found were for earlier versions of froyo and users reported problems.
kiwijunglist said:
Actually I have the same question as was confused about which method to use as well. My phone is JPO/JPP/JP3. I have searched but all the root methods I found were for earlier versions of froyo and users reported problems.
Click to expand...
Click to collapse
Thank you glad to hear I am not alone
andrej.marinic:
Search is what started the confusion its hard to read all the threads to find out the end result.
I would also like to know if there is one that you can apply via the recovery method (like copying update.zip to sdcard) so I do not have to use a program like ODIN.
Thank you again in advance,
I did it using the CF method: http://forum.xda-developers.com/showthread.php?t=788108
its very easy and pain free
padlad said:
I did it using the CF method: http://forum.xda-developers.com/showthread.php?t=788108
its very easy and pain free
Click to expand...
Click to collapse
I also saw this but some people have had issues so I am bit reluctant to try it
cf-root works like a charm on JPA. no issues for me.
Sent from my GT-I9000 using XDA App
Cf root but make sure your 3 button download mode works as a failsafe
Sent from my GT-I9000 using XDA App
cenonmin said:
I also saw this but some people have had issues so I am bit reluctant to try it
Click to expand...
Click to collapse
Just make sure you use CF-Root-XX_XEU_JPO-v1.2-Busybox-1.17.1.zip
I have the official Germany Froyo. I will wait for the 3 Button fix and OCLF fix for the official Froyo.
I did tested other things and it made my phone slower and quickly out of memory. So I reset ( all data gone - but I did Backup my apps ) everything and it went normal
Just better wait until they find a solution for the official Froyo and not the unofficial Froyo.
I am using CF-Root-XX_XEU_JPO-v1.2-Busybox-1.17.1.zip flashed via Odin. Took 30 seconds and now I can use stuff like Titanium Backup and other useful apps. All on the official JPO through Kies.
silverstorm said:
I am using CF-Root-XX_XEU_JPO-v1.2-Busybox-1.17.1.zip flashed via Odin. Took 30 seconds and now I can use stuff like Titanium Backup and other useful apps. All on the official JPO through Kies.
Click to expand...
Click to collapse
Did you have any issues with 'un-rooting'??
EDITED:
What I am saying here is Kies totally bricked my phone and as such I won't use it again but instead Odin.
You however mention you are still using Kies. Did you have any issues in un-rooting when using Kies for the next flash... or have you not tried this yet?
Beards said:
Did you have any issues with 'un-rooting'??
Click to expand...
Click to collapse
Erm, not had a reason to un-root yet so haven't tried. But since this is flashed as a Kernel I presume I would have to flash another non-rooted Kernel through Odin in order to un-root. but don't know why I'd want to. If I wanted to upgrade to a newer version of Froyo, the root shouldn't affect it as far as I'm aware, it's only LagFixes really that are required to be disabled.
But to be on the safe side, you could re-flash a stock non-rooted JPO firmware from samfirmware.com through ODIN prior to going ahead with a Kies update, but this will mean you'll lose your data. I always go through this route anyway and then use Titanium backup to restore. (for which you'll require root!)
silverstorm said:
Erm, not had a reason to un-root yet so haven't tried. But since this is flashed as a Kernel I presume I would have to flash another non-rooted Kernel through Odin in order to un-root, but don't know why I'd want to. If I wanted to upgrade to a newer version of Froyo, the root shouldn't affect it as far as I'm aware, it's only LagFixes really that are required to be disabled.
Click to expand...
Click to collapse
Really... I could have sworn you have to take off any root prior to the next flash.
Beards said:
Really... I could have sworn you have to take off any root prior to the next flash.
Click to expand...
Click to collapse
Just lag fixes need to be disabled in order to flash via kies, the last couple of flashes i did had root already on, flashed no problem.
padlad said:
Just lag fixes need to be disabled in order to flash via kies, the last couple of flashes i did had root already on, flashed no problem.
Click to expand...
Click to collapse
Well what do you know...... Something new learned today.
Thanks Guys.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To root froyo use simpleoneclick.
Sent from my GT-I9000 using XDA App
tt4079 said:
To root froyo use simpleoneclick.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Links please.
http://forum.xda-developers.com/showthread.php?t=833953
Breaking News: New One Click Root app from RyanZA, the maker of the famous OCLF.
I know this forum is infested with many such warnings and/or desperate shouts for help. However, after having a quick look at the brick cases, all are having one thing in common- they tried to go to GB ROM via PC odin.
So guys, especially the novices out there, if you do not know what you are doing, may be you should sit tight until things get sorted out. I am telling you because I'd been there done that, so if you are already on LPY, you would rather stay there than try some odd thing and get your phone bricked.
No, this is not fear mongering post. I am more than happy to be proven otherwise. I am just posting my inference after observing for quite sometime.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7000 using Tapatalk 2
In the past few days since LPY as come out I went back & forth from LPY to GB via Mobile Odin several times, also after searching the thread I found that most bricks are Cm9 + LPY kernel related
I think that Odin is pretty safe to use but that is just my opinion and if one is not sure then better not try.
P.s
Still can't decide which is better modified GB or stock ics (LPY)
Sent from my GT-N7000 using xda premium
anilisanil said:
I know this forum is infested with many such warnings and/or desperate shouts for help. However, after having a quick look at the brick cases, all are having one thing in common- they tried to go to GB ROM via PC odin.
So guys, especially the novices out there, if you do not know what you are doing, may be you should sit tight until things get sorted out. I am telling you because I'd been there done that, so if you are already on LPY, you would rather stay there than try some odd thing and get your phone bricked.
No, this is not fear mongering post. I am more than happy to be proven otherwise. I am just posting my inference after observing for quite sometime.
Click to expand...
Click to collapse
well i will tell you i went from ics to gb via pc odin without any issues
installed ics via pc odin due to mobile odin not flashing correctly, didnt have root, flashed kj4 (gb rom) and didnt have any issues
Can anyone confirm that in his case, flashing stock LPY to stock GB with PC Odin caused a problem for him?
This migration from LPY to GB, should we use 1 file ROMs from samfirmware.com, or we must use 3 files ROMs? Also do we need a pit file for that?
These three cases of superbricks all have one thing in common, check-
http://forum.xda-developers.com/showthread.php?t=1653290
http://forum.xda-developers.com/showthread.php?t=1649982
http://forum.xda-developers.com/showthread.php?t=1650209
Richy99 said:
well i will tell you i went from ics to gb via pc odin without any issues
installed ics via pc odin due to mobile odin not flashing correctly, didnt have root, flashed kj4 (gb rom) and didnt have any issues
Click to expand...
Click to collapse
well, this shows that results may vary even when using the same method. I did it the same way but used KJ1 instead of KJ4 and, looking back at the symptoms, bricked my device during the first GB reflash.
Ce said:
well, this shows that results may vary even when using the same method. I did it the same way but used KJ1 instead of KJ4 and, looking back at the symptoms, bricked my device during the first GB reflash.
Click to expand...
Click to collapse
did you use the stock or rooted ics?
Richy99 said:
did you use the stock or rooted ics?
Click to expand...
Click to collapse
From a rooted GB to a stock (unrooted) ICS and tried to get back to a stock GB.
Ce said:
From a rooted GB to a stock (unrooted) ICS and tried to get back to a stock GB.
Click to expand...
Click to collapse
is that a wipe rom? its possible its the wiping that kills the device
Richy99 said:
is that a wipe rom? its possible its the wiping that kills the device
Click to expand...
Click to collapse
Sorry, I also used a KJ4 rom (had to look at sammobile to check) and Yes, that was a wipe rom.
Ce said:
Sorry, I also used a KJ4 rom (had to look at sammobile to check) and Yes, that was a wipe rom.
Click to expand...
Click to collapse
thats probably the difference then, the wipe is what seems to be causing the bricks, the one i used was not a wipe rom
edit : just checked and it was kj1 not kj4 i flashed, the version weas the one fromthe chainfire root thread
try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose
thelucius said:
Can anyone confirm that in his case, flashing stock LPY to stock GB with PC Odin caused a problem for him?
This migration from LPY to GB, should we use 1 file ROMs from samfirmware.com, or we must use 3 files ROMs? Also do we need a pit file for that?
Click to expand...
Click to collapse
I am the "lucky" member of superbrick team. Hopefully Samsung will not ask for paying for the MoBo replacement. Could any1 suggest me what to put as reason for Samsung to claim warranty successfully? Thanks
Tell them you were upgrading your Note with Kies and a problem occurs but you don't know what. If they want more details, you can say your computer freezed or reboot while upgrading.
(Kies has been proved so unreliable in the past that it should do the trick)
Sorry if my question sound dumb, or I don't say the correct verbiage.
I have the GT-N7000 with the official Samsung ginger bread 2.36 version, and I installed the German Samsung release ICS leak using the Odin software via PC and it worked just fine. The phone has been working fine for few days now without any issues I can notice.
What should I do after knowing about this bug issue in the ICS leak ? Just let the phone be or go back GB 2.36 ? Any input appreciated.
have now flashed from stock ics to stock kj1 a few times have then rooted kj1 and upgraded to either lc1 or ics etc so far so good am on stock german ics with temp root if i need it
mackey77 said:
Sorry if my question sound dumb, or I don't say the correct verbiage.
I have the GT-N7000 with the official Samsung ginger bread 2.36 version, and I installed the German Samsung release ICS leak using the Odin software via PC and it worked just fine. The phone has been working fine for few days now without any issues I can notice.
What should I do after knowing about this bug issue in the ICS leak ? Just let the phone be or go back GB 2.36 ? Any input appreciated.
Click to expand...
Click to collapse
you dont have any issue. you are stock set up.
Thanks for your response, feel a bit relived.
Sine. said:
Tell them you were upgrading your Note with Kies and a problem occurs but you don't know what. If they want more details, you can say your computer freezed or reboot while upgrading.
(Kies has been proved so unreliable in the past that it should do the trick)
Click to expand...
Click to collapse
Thanks but what if they say: "What were you upgrading your Note to?" I mean, what was the reason to try upgrade the Note? And what if they say ...there was not an upgrade for your Note since the time you had bought it. Thanks
Hello Everyone,
So today i wanted to go to 4.0.3 ICS via ODIN 1.83 / 1.85.
Both won't work, and they keep hanging on '' Factoryfs.img " The phone won't turn, because it says i need to do a firmware recovery.
Im from the Netherlands and use this:
http://forum.xda-developers.com/showthread.php?t=1424997
Hopefully someone can solve my problem.
* I did NOT check Re-Partition *
Hoolz14 said:
Hello Everyone,
So today i wanted to go to 4.0.3 ICS via ODIN 1.83 / 1.85.
Both won't work, and they keep hanging on '' Factoryfs.img " The phone won't turn, because it says i need to do a firmware recovery.
Im from the Netherlands and use this:
http://forum.xda-developers.com/showthread.php?t=1424997
Hopefully someone can solve my problem.
* I did NOT check Re-Partition *
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hoolz14 said:
Hello Everyone,
So today i wanted to go to 4.0.3 ICS via ODIN 1.83 / 1.85.
Both won't work, and they keep hanging on '' Factoryfs.img " The phone won't turn, because it says i need to do a firmware recovery.
Im from the Netherlands and use this:
http://forum.xda-developers.com/showthread.php?t=1424997
Hopefully someone can solve my problem.
* I did NOT check Re-Partition *
Click to expand...
Click to collapse
Please say you didn't do a factory reset....
Hoolz14 said:
Hello Everyone,
So today i wanted to go to 4.0.3 ICS via ODIN 1.83 / 1.85.
Both won't work, and they keep hanging on '' Factoryfs.img " The phone won't turn, because it says i need to do a firmware recovery.
Im from the Netherlands and use this:
http://forum.xda-developers.com/showthread.php?t=1424997
Hopefully someone can solve my problem.
* I did NOT check Re-Partition *
Click to expand...
Click to collapse
You are super bricked go claim your warranty..
Sent from my GT-N7000 using xda premium
was your phone in working order before yo decided to update? what ROM were you on? did you wipe on a dangerous kernel?
Did you EVER do a wipe on your phone? If yes, did you check emmc integrity afterwards?
I Believe i was on a 2.3.6 ROM, but can't really remember because the phone was laying around and i decided to use it again.
I know there's still a backup on the external SD card from it that i made with CWM, and here it all did go wrong.
I wanted to recover the backup, and the phone rebooted and hanged on '' Galaxy note n7000 screen ".
So, what is the best step for now what i can do ?
msedek said:
You are super bricked go claim your warranty..
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
So if i am superbricked, how can i see my flashcounter?
Because otherwise i cannot claim my warranty, and what can i do about this than? i suppose there is a manner to get it up and running again ?
Not sure, but I think you have to flash a Stock ICS kernal before you flash any ICS Rom for the first time.
dohab said:
Not sure, but I think you have to flash a Stock ICS kernal before you flash any ICS Rom for the first time.
There are a lot of good kernals out there.
Click to expand...
Click to collapse
Where could i find those? i'm downloading gingerbread now....
Hoolz14 said:
So if i am superbricked, how can i see my flashcounter?
Because otherwise i cannot claim my warranty, and what can i do about this than? i suppose there is a manner to get it up and running again ?
Click to expand...
Click to collapse
Well, you should know what your flash counter was before. Flashing a stock ROM did not increase it.
Also, if you are really super-bricked Samsung will not be able (or willing) to read it.
Hoolz14 said:
Where could i find those? i'm downloading gingerbread now....
Click to expand...
Click to collapse
you can find them in the development original forum :
http://forum.xda-developers.com/forumdisplay.php?f=1700
for example, check this out :
http://forum.xda-developers.com/showthread.php?t=1371007
or
http://forum.xda-developers.com/showthread.php?t=1673072
but if you are downloading GB, then you have to use a GB kernel instead.
you can check dr.ketan thread for a really Major information:
http://forum.xda-developers.com/showthread.php?t=1424997
I lost my mind in that thread once, but, good luck to you. :good:
Randomwalker said:
Well, you should know what your flash counter was before. Flashing a stock ROM did not increase it.
Also, if you are really super-bricked Samsung will not be able (or willing) to read it.
Click to expand...
Click to collapse
Alright
Monday to vodafone then ...
Put your phone in Odin mode there you can see if you have binary counter diferent from 0 if it's not 0 then get a jig to reset it
Sent from my GT-N7000 using xda premium
---------- Post added at 06:54 PM ---------- Previous post was at 06:52 PM ----------
Randomwalker said:
Well, you should know what your flash counter was before. Flashing a stock ROM did not increase it.
Also, if you are really super-bricked Samsung will not be able (or willing) to read it.
Click to expand...
Click to collapse
Super bricked allows you to go to odin mode and recovery mode but it's the result of damaged emmc(flash memory) chip son you can not flash any OS
Sent from my GT-N7000 using xda premium
msedek said:
Put your phone in Odin mode there you can see if you have binary counter diferent from 0 if it's not 0 then get a jig to reset it
Sent from my GT-N7000 using xda premium
---------- Post added at 06:54 PM ---------- Previous post was at 06:52 PM ----------
Super bricked allows you to go to odin mode and recovery mode but it's the result of damaged emmc(flash memory) chip son you can not flash any OS
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Well so far i understand is this:
In ODIN mode it says:
ODIN MODE (In red)
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICAL
is this it?
Never got into android before, but willing to learn it tho, really like it.
Luckely i still have my galaxy s3 that works perfectly fine (Stock)
By the way,
What if my warranty does not cover this, or there would occur a problem that i cannot send it under warranty what steps can i take to get it working again? or is it really dead....
Hoolz14 said:
Well so far i understand is this:
In ODIN mode it says:
ODIN MODE (In red)
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICAL
is this it?
Never got into android before, but willing to learn it tho, really like it.
Luckely i still have my galaxy s3 that works perfectly fine (Stock)
Click to expand...
Click to collapse
Wait, So you say
a.) you were on 2.3.6 i,e, Gingerbread,
b.) you had CWM which I assume is again Gingerbread based,
c.) You backed up and restored from CWM (Gingerbread based) and you got stuck at Boot Logo.
d.) You tried flashing stock ICS ROM via ODIN while on a Gingerbread based kernel.
c.) Stuck at FactoryFS.img which translates to a Superbrick. (While on a Gingerbread Kernel?)
Please contact Entropy ASAP before sending the device to samsung.
Please change your thread title to "Galaxy Note stuck at flashing FactoryFS from Gingerbread." or something similar so that your thread can be noticed easily.
If this is indeed true, then it means we are all going to brick at some point.
Are you SURE you were on Gingerbread when you did the restore?
Your symptoms sound like what happens when wiping with older CF-Root ICS versions (Specifically CF-Root 5.5 for ICS kernels).
Entropy512 said:
Are you SURE you were on Gingerbread when you did the restore?
Your symptoms sound like what happens when wiping with older CF-Root ICS versions (Specifically CF-Root 5.5 for ICS kernels).
Click to expand...
Click to collapse
Girlfriend just got home, and she says it was on android 4.0.3 (So thats ICS) Sorry for this one guys, last time i used the phone its like 3 months ago, and she used it till yesterday.
So, the phone was on android 4.0.3
Hi everyone,
I tried to install the new ICS ROM for my P7310.
Had CM10 installed and first tried to install the modified one via CWM.
Worked like a charm, but after screen was off it became messed up just like this guy had it.
Then I tried to flash the Stock ROM via ODIN. Installed just fine, but now I have the same messed up screen.
Problem is: It is messed up in Stock Recovery, too
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can I install an older ROM (which one, tab is from Switzerland) or CWM via Odin?
I think I could hit the download mode without seeing what is on the screen
Thanks in advance!
(Edit: for a solution, scroll to end of this post)
I've heard "garbled screen" a few times regarding the ICS update.
Have you seen these posts? They suggest a solution... (and there's even another reference to Switzerland...)
I don't have experience with the issue, and can't comment beyond what I read elsewhere.
rufree2talk said:
I bought the Tab 8.9 in Switzerland recently... am fairly well informed about working around Android devices... updated the firmware on my stock Honeycomb to the US ICS release via Odin... no issues in the process, and the tablet came up smart and zippy running ICS... even got the Play Movies/Books/Music app which normally doesn't feature in devices sold outside USA... although not much use of them unless I use a VPN service...
the problem is that as soon as I lock the device, or the screen times out, on trying to unlock the device I am met by a garbled unworkable screen... there is no option but to hard-reboot the device to get it working again... somebody is having the same issue here, but I can't post in Development forums... have tried reflashing and all, but its always the same thing... even with stock USA Honeycomb its the same behaviour... is there a region limitation to this firmware for proper functionality?
Click to expand...
Click to collapse
gatt088 said:
Same issue here.. As whit every usa stock based version... I have bricked my tab 2 times, i will appreciate that this issue will be mentioned in new threads as not every xda member is from usa. No problems with jb aosp and cm based version. Waiting for some european stock version
Click to expand...
Click to collapse
rufree2talk said:
I managed to workaround this issue... flashed the P7310UELA3 3.2 via Odin, booted into recovery, performed factory reset/data erase, again flashed P7310UELPB 4.0 via Odin, and this time the Tab has no issue! it works like it should and there is no garbled screen on unlocking... if you want to save your app data before you do these steps, use Titanium...
Click to expand...
Click to collapse
Hurrian said:
If you're not on ICS yet but plan on upgrading, flash P7310UELA3 first. It seems that for some, flashing ICS straight gives you the weird screen strobing.
Click to expand...
Click to collapse
Edit: confirmed solution
by now several people have confirmed that flashing the P7310UELA3 is a working solution to screen flickering after resume from standby. (Flash the UELA3 using Odin, then flash again the ROM you really want to run)
You can find UELA3 ROM via any of these links:
http://forum.xda-developers.com/showthread.php?p=24482346#post24482346 (thx nirogu325 - also linked in post #1 same thread)
http://samsung-updates.com/gt-p7310-galaxy-tab-8-9-wi-fi/
http://forum.xda-developers.com/showthread.php?t=1483168
be kind and hit "Thanks" if this helped you
Thanks a lot!
Installed as supposed, everything is fine now
Glad to know it helped. Good to have that confirmed, for others who may have this...
Click thanks to say thanks
fred_be9300 said:
Glad to know it helped. Good to have that confirmed, for others who may have this...
Click thanks to say thanks
Click to expand...
Click to collapse
Sure
You sir saved my day. Should be posted in the top thread.
Guess the search function will do for most ppl
Back to HC and to ICS again?
I've seen this quote a day late.
" If you're not on ICS yet but plan on upgrading, flash P7310UELA3 first. It seems that for some, flashing ICS straight gives you the weird screen strobing."
Now I have screen problems on ICS when I connect a data cable http://forum.xda-developers.com/showpost.php?p=31410065&postcount=21. If I downgrade via Odin to P7310UELA3 and then go back to ICS via Odin, will data be preserved?
Update after flashing:
I flashed the recommended HC version, Tab couldn't get through bootanimation sequence. I turned the Tab off and started download mode again. Reflashed with ICS and all data was still there. Only the homescreens were empty again. My screen problem is fixed though.
this continues to happen (to small minority?) of people moving from HC to ICS, but seems to be hard to find.
(last case: http://forum.xda-developers.com/showthread.php?t=1895361)
(I've included it a new FAQ I posted here)
thanks
thaks all of u u really save my tablet! I thought it was damaged! I applied the above procedure and everything is perfect now
Hi Everyone
I'm doing something wrong here, hope someone can help.
Every time I install a ROM (Jellybean or ICS) I get the garbled screen after standby.
So, I've tried flashing the P7310UELA3 via Odin and I get a fail, do I just upload it to Bootloader or PDA?
My P7310 is a French version and I have tried flashing the French bootloader too, but still get fail.
I am a noob at this, but I am so close to installing a good rom but fail at the final hurdle. Any help would be fantastic.
Cheers
MikeMcGrathXmen said:
Hi Everyone
I'm doing something wrong here, hope someone can help.
Every time I install a ROM (Jellybean or ICS) I get the garbled screen after standby.
So, I've tried flashing the P7310UELA3 via Odin and I get a fail, do I just upload it to Bootloader or PDA?
My P7310 is a French version and I have tried flashing the French bootloader too, but still get fail.
I am a noob at this, but I am so close to installing a good rom but fail at the final hurdle. Any help would be fantastic.
Cheers
Click to expand...
Click to collapse
flash the full rom as PDA
prince93 said:
flash the full rom as PDA
Click to expand...
Click to collapse
Doesn't seem to work for me, i keep getting fail, maybe because its a French version? I really dont know what else to do!
MikeMcGrathXmen said:
Doesn't seem to work for me, i keep getting fail, maybe because its a French version? I really dont know what else to do!
Click to expand...
Click to collapse
you need to UNCHECK the "repartition" option.. have you already done this ?
prince93 said:
you need to UNCHECK the "repartition" option.. have you already done this ?
Click to expand...
Click to collapse
Yeah, mine is defaulted with repartition unchecked. I really dont understand what I'm doing wrong.
MikeMcGrathXmen said:
Yeah, mine is defaulted with repartition unchecked. I really dont understand what I'm doing wrong.
Click to expand...
Click to collapse
do you get the communication port with a yellow color before flashing?
also, make sure you are using the original USB cable that came with your tablet to flash it
I flashed my 7310 with UELA3 using Odin and then used default recovery to install CWM 6.0.0.8.
But now CWM is rolling very fast, not readable.
I found this solution, but it's for the 10.1 tab. http://forum.xda-developers.com/showthread.php?p=27830023#post27830023
Should I try it on my 8.9?
Need ROM P7310UELA3 - hotfile links brokrn
Hi,
Thank you for sharing this solution.
Unfortunately , I could not find a working link to ROM P7310UELA3, since hotfile was shut down.
Could anyone share this ROM with me ?
Thank you, Jacques.
jfy65 said:
Hi,
Thank you for sharing this solution.
Unfortunately , I could not find a working link to ROM P7310UELA3, since hotfile was shut down.
Could anyone share this ROM with me ?
Thank you, Jacques.
Click to expand...
Click to collapse
I think this P7310UELA3 is android 3.2, and the android ICS 4.0.4 is available
so even if you want an android 3.2, I don't think you'll find anyone who can share it with you
If it is OK to use android ICS there is a link I already uploaded to Dev-Host HERE
this is all I got, and this all I have and can share with anyone
Need ROM P7310UELA3 - hotfile links broken
omarainea said:
I think this P7310UELA3 is android 3.2, and the android ICS 4.0.4 is available
so even if you want an android 3.2, I don't think you'll find anyone who can share it with you
If it is OK to use android ICS there is a link I already uploaded to Dev-Host
this is all I got, and this all I have and can share with anyone
Click to expand...
Click to collapse
Thanks. This whole stream is about the problem with the installation of stock ICS ROM which results in screen flickering on some devices. It happened to me after upgrading with KIES: The tablet becomes completely unusable. The solution suggested and tested above is to flash P7310UELA3 before ICS. Unfortunately, I could not find a working link to ROM P7310UELA3, since hotfile was shut down.
Could anyone share this ROM with me ?
Thank you, Jacques.
[SIZE=+3]Frequently Asked Questions[/SIZE]
[SIZE=+2]Samsung Galaxy S I9000[/SIZE]
[SIZE=+1]This a short list of frequently asked questions in this device forum and the answers often given as a response. It should serve as a starting point for gathering knowledge and finding solutions to many common problems. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, try to find an existing thread or create your own. Do not use this as a general help thread.[/SIZE]
[SIZE=+1]Q1: How do I flash and root GB 2.3.6 on Samsung Galaxy S I9000?[/SIZE]
All the things in relation to flashing GB 2.3.6 and rooting is available on the below link:-
http://forum.xda-developers.com/showthread.php?t=1637966
[SIZE=+1]Q2: How do I know if my Samsung Galaxy S I9000 is bricked or not?[/SIZE]
If you are able to go in recovery/download mode then you haven't bricked your Samsung Galaxy S I9000.
[SIZE=+1]Q3: How to go in recovery/download mode on my Samsung Galaxy S I9000?[/SIZE]
Volume UP+HOME+POWER will take you to recovery mode
Volume DOWN+HOME+POWER will take you to download mode
[SIZE=+1]Q4: What if my recovery/download modes are not working?[/SIZE]You need to get a USB JIG and try using it.
[SIZE=+1]Q5: What is USB JIG?[/SIZE]This is a small device made for Samsung phones to get your phone in download mode where you are flash using odin
[SIZE=+1]Q6: Is it always mandatory to take backup before flashing ROM?[/SIZE]No, however, taking backup is recommended so if anything goes wrong while flashing to can restore your old version.
[SIZE=+1]Q7: How to enable "developer options" in 4.2.2?[/SIZE]Goto->Setting->About Phone->Click 7 times on Build number
After this you will see a pop up message saying that you are now developer.
[SIZE=+1]Q8: Where I can find flashable modems's files?[/SIZE]http://forum.xda-developers.com/showthread.php?t=1158783
[SIZE=+1]Q9: How to make native video call on Samsung Galaxy S (I9000) on Jellybean/ICS rom, this feature was there in GB rom?[/SIZE]This feature only comes with stock ...lopers.com/announcement.php?a=81"]Forum Rules[/B] | New Users Guide | XDA Tour | Report Posts[/CENTER]
This FAQ is part of a Recognized Contributor Group Initiative. Please look for a similar FAQ thread when visiting another device forum.
A special thanks to everyone who contributed to the production of this FAQ
video call
erpurohit said:
[SIZE=+3]Frequently Asked Questions[/SIZE]
[SIZE=+2]Samsung Galaxy S I9000[/SIZE]
[SIZE=+1]This a short list of frequently asked questions in this device forum and the answers often given as a response. It should serve as a starting point for gathering knowledge and finding solutions to many common problems. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, try to find an existing thread or create your own. Do not use this as a general help thread.[/SIZE]
[SIZE=+1]Q1: How do I flash and root GB 2.3.6 on Samsung Galaxy S I9000?[/SIZE]
All the things in relation to flashing GB 2.3.6 and rooting is available on the below link:-
http://forum.xda-developers.com/showthread.php?t=1637966
[SIZE=+1]Q2: How do I know if my Samsung Galaxy S I9000 is bricked or not?[/SIZE]
If you are able to go in recovery/download mode then you haven't bricked your Samsung Galaxy S I9000.
[SIZE=+1]Q3: How to go in recovery/download mode on my Samsung Galaxy S I9000?[/SIZE]
Volume UP+HOME+POWER will take you to recovery mode
Volume DOWN+HOME+POWER will take you to download mode
[SIZE=+1]Q4: What if my recovery/download modes are not working?[/SIZE]You need to get a USB JIG and try using it.
[SIZE=+1]Q5: What is USB JIG?[/SIZE]This is a small device made for Samsung phones to get your phone in download mode where you are flash using odin
[SIZE=+1]Q6: Is it always mandatory to take backup before flashing ROM?[/SIZE]No, however, taking backup is recommended so if anything goes wrong while flashing to can restore your old version.
[SIZE=+1]Q7: How to enable "developer options" in 4.2.2?[/SIZE]Goto->Setting->About Phone->Click 7 times on Build number
After this you will see a pop up message saying that you are now developer.
[SIZE=+1]Q8: Where I can find flashable modems's files?[/SIZE]http://forum.xda-developers.com/showthread.php?t=1158783*Forum Rules | New Users Guide | XDA Tour | Report Posts
This FAQ is part of a Recognized Contributor Group Initiative. Please look for a similar FAQ thread when visiting another device forum.
A special thanks to everyone who contributed to the production of this FAQ
Click to expand...
Click to collapse
please help me :
iam newbie and I want to know how to make video call on my SGS I9000 with any 4.2.2 ROM, becauase there is no option tab to make video call on dialer, looks like on stock rom GB.
sorry for my bad English, Thank you very much, May GOD Blessing
kiempuoi said:
please help me :
iam newbie and I want to know how to make video call on my SGS I9000 with any 4.2.2 ROM, becauase there is no option tab to make video call on dialer, looks like on stock rom GB.
sorry for my bad English, Thank you very much, May GOD Blessing
Click to expand...
Click to collapse
Its not possible on any Jellybean/ICS rom for i9000.
use tango or skype
free and better quality
What some good roms 4.1.2 besides mackay and cm10?
Sent from my GT-I9000 using Tapatalk 2
AlexsamaM said:
What some good roms 4.1.2 besides mackay and cm10?
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Helly bean may be
Or slimbean
But not my ROM lol
Sent from my GT-I9000 using xda app-developers app
New here
Hi, I'm a user of Xperia Neo V and now my friend wants me to upgrade his SGS to either ICS or JB.
Since this is my first time flashing SGS, so there are 2 questions that I want to ask :
1) Is there a kernel included inside a custom ROM?
2) Is the kernel needs to flash separately like Xperia phones? Or the kernel will flash through CWM with ROM?
3) Is the kernel or ROM requires specific version of ODIN to flash?
Thanks in advance and sorry for bad English
XII KAITO said:
Hi, I'm a user of Xperia Neo V and now my friend wants me to upgrade his SGS to either ICS or JB.
Since this is my first time flashing SGS, so there are 2 questions that I want to ask :
1) Is there a kernel included inside a custom ROM?
2) Is the kernel needs to flash separately like Xperia phones? Or the kernel will flash through CWM with ROM?
3) Is the kernel or ROM requires specific version of ODIN to flash?
Thanks in advance and sorry for bad English
Click to expand...
Click to collapse
1.) Yup, the roms all come with kernels
2.) The kernel will flash with the rom in recovery, and if you want to change kernel you only need to flash it in through recovery
3.) With ICS and JB, all of the roms and most of the kernels are made to be flashed through CWM/TWRP/Devil etc etc, so you won't need Odin
Sent from my GT-P7510
Nice FAQ
Don't able to send SMS with 10.2 official
Hi
I have just installed cyanogen 10.2 unofficial on my Galaxy GT-I9000. Everything is working fine expect than sending SMS on mobile carrier.
I also install GO SMS Pro but problem remain same. Can anyone help me
loveypari14 said:
Hi
I have just installed cyanogen 10.2 unofficial on my Galaxy GT-I9000. Everything is working fine expect than sending SMS on mobile carrier.
I also install GO SMS Pro but problem remain same. Can anyone help me
Click to expand...
Click to collapse
Follow this guide
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Please guide me I need to root my device and install CWM. I have 2.3.6 DDJVB .
THANK YOU
mrishantsharma01 said:
Please guide me I need to root my device and install CWM. I have 2.3.6 DDJVB .
THANK YOU
Click to expand...
Click to collapse
in this thread you'll find everything for your issue.
Hi
How can I swap internall sdcard and external sdcard at CM11 (kitkat)?
MaousBJ said:
Hi
How can I swap internall sdcard and external sdcard at CM11 (kitkat)?
Click to expand...
Click to collapse
You would need to ask this in the CM11 thread.
Thank you.
MaousBJ said:
Hi
How can I swap internall sdcard and external sdcard at CM11 (kitkat)?
Click to expand...
Click to collapse
refer to [MOD][SD card switching] Vold.fstab files modified versions for Galaxy series and
[POLL][FAQ][Discussion] Kit Kat 4.4 / CM 11 for Galaxy S [i9000][i9001][M110S
Check this out! Links to useful Guides and " Banned " Documentaries
does anyone know what is the latest stable miui rom for s1 i9000? thanks.
Android 4.4.3 and Greenify
I have the latest CM11-20140607-nightly for my Galaxy S i9000. After reading about the Greenify app, is it worth installing as most of it's features seem to be built into the ROM?
I am very impressed by the quality of all the CM ROMs I have downloaded and have had only a few problems.
Hello,
My device is Galaxy S (M110s). I tried to install KK rom with M110s Kitkat patch tool. But some roms are not working. When i installed Slimkat rom i failed to receive calls. It not even showing any incoming call notification screen but is shows missed call notification after i missed to receive call. Please help me :crying:
i9001 phone keep rebooting
Hello All,
I am very afraid I have Samung Galaxy I9001 I have installed Custom Rom Cynogenmod 10 but today i want to go back to 2.3.6 gingerbread.
I installed odin and added aries.ops and used I9001XXKQG_I9001XXKPL_I9001NEELE1_HOME.tar.md5 file
It passed but my phone keep rebooting it shows samsung galaxy i9001 and again go for a reboot Please help me as soon as possible.
Regards,
Amit Goyal