Related
All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!
There's nothing for the Kaiser that uses the front speaker yet.
Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!
has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...
Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?
monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano
snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?
Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN
Hello,
I have a HTC TyTN II (Kaiser) and i need any kind of software to record voice conversations (both sides).
Is there any software in the market for this (even paid)? I only can find one that records my own voice...
thank you
............the standard voice recorder? Lol need the cat
GTX2009 said:
Hello,
I have a HTC TyTN II (Kaiser) and i need any kind of software to record voice conversations (both sides).
Is there any software in the market for this (even paid)? I only can find one that records my own voice...
thank you
Click to expand...
Click to collapse
Reading will help first look about a post bellow yours............
GTX2009 said:
Hello,
I have a HTC TyTN II (Kaiser) and i need any kind of software to record voice conversations (both sides).
Is there any software in the market for this (even paid)? I only can find one that records my own voice...
thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=485783
try vito audio notes
sorry posting this thread, didn't see the actual thread posting the solution for this....
I've tried IRC on both of my Tilts and my friend's device as well. It works just fine.
Go *HERE* its a simple registry setting that I made into a cab file. Recorded voice is alot louder than using ICR and theres alot better chance of it working. You can then use the free Voice Recorder included in all Roms or go for something like Vito Audio Notes to auto record all conversations to storage card.
Resco Audio Recorder works for me. If you try it, make sure you open th phone tab in the general options and un-check Record in back round.
I made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Tested and working on the following Roms:
SimpleOS Xtralite v2.1, HyperDragon 4th Feb, PDA Corner Ultimate v17, v19 & v20, Anryl's 15/3 6.S rom, AthineOS WWE, WM6.5 betas (HyperDragon and PDA Corner works with HTC Voice Recorder and VITO Audio Notes, rest confirmed with VITO Audio Notes).
Download the 2_Way_Recording cab (rapidshare) *HERE*
EDIT: Made a new cab combining my 2 way recording plus the incall enable edit from pocketnow.com to enable BOTH sides to be recorded clearly from the dialer menu after a call has been established. It does not affect the ability to use a 3rd party app if you want, just gives you extra ease so you dont have to load any new programs up when you are in a call. Install the following cab to device memory, then once a call has been established just goto the dialer menu and select record. It will record in .wav format and save the recording to the Device\My Documents\Notes folder.
Download the 2_Way_Plus_InCall_Recording cab (rapidshare) *HERE*
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
so sweet ty skip
Thank you for this contribution.
Thanks bruv gotta try this out
If it works for you then report back what phone, rom and radio you are using it on please
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Works great for me, ty for sharing this, as i'm sure most of us wouldn't have seen it in the original thread.
Thanks alot mskip
Oh and I'm using an AT&T Tilt with Hyperdragons 02/04/2009 IOLITE Rom with Kaiser 1.65.21.18 Radio. Worked just fine using builtin htc audio recorder and Vito Audio Notes Touch
zard said:
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Click to expand...
Click to collapse
Tested on Anryl's 15/3 6.S rom after fresh flashing. Works with 1.70.18.02 radio. I only have SMS restored, Resco Explorer, PCMKeyboard and Resco Audio Recorder installed. Didn't get the cpu overload problem. Need to complete my Exchange 2007 Sync and finish installing the rest of the apps again before I test again.
Recording volume is rather soft though, even though volume had been set to maximum, same as for my TyTN II volume.
It seems not work in Diamond..
eastwoodwang said:
It seems not work in Diamond..
Click to expand...
Click to collapse
Phone or Rom?
Great job mskip ! Finally working for me !
ROM AthineOS WWE, RADIO 1.71.09.01 and VITO AUDIO NOTES 1.37
Thanks
Finally got this to work with stock AT&T Tilt
Thanks to everyone involved.
Vito Audio Notes was tricky to figure out. I uninstalled and reinstalled it several times before I got the settings right.
Move the yellow equalizer all the way to the left when recording. Set the microphone gain to high.
If you move the yellow equalizer all the way to the right, it will only record very loud sounds, which doesn't work for recording phone calls. If you set the microphone gain to low, the recording will be hard to hear when you play it back. You'll have to hold the speaker up to your ear.
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Thanks Sir mskip,
Could it be mirrored?
Thank You
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
stylez said:
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Click to expand...
Click to collapse
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
jorra said:
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
Click to expand...
Click to collapse
Ok let me know what happens
After you install ICR the only way to get rid of it is a Hard Reset. Not sure how they will work together maybe the registry edit will bump up the volume with icr.
I think the registry changes are more compatable then using ICR as alot of people seem to have problems getting it working.
Report back
jorra said:
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
Click to expand...
Click to collapse
I guess if your recorded volume didnt increase then ICR is taking control of rerouting the incoming sound. With JUST the registry changes the volume is very loud. I had a 30 minute phone call yesterday and VITO Audio Notes recorded both sides perfectly. Maybe you could try a hard reset sometime to get rid of ICR and then try a comparison with just the registry cab
mskip said:
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
Click to expand...
Click to collapse
Never guess what it works
Going to do a bit more testing as not sure if the RoseROM worked without as never tested it will also test Kavana's "as know that didn't", will link to you if all fine.
So lots of chefs are cooking skype into their roms these days, and I was wondering if I could point out something that might help all of us.
See the big problem with skype for windows mobile, as noted by many other people on XDA, is that when in a call it plays the other person over the speakerphone as opposed to the earpiece. For other phones they have a workaround called audioroute, but for the xperia we get a nicer solution: Sony's Skype panel.
The Skype panel works perfectly without any modification as opposed to the annoying speakerphone junk of the regular skype app.
So unless there is something i'm missing, if the rom you are cooking is panel enabled, how about the skype panel instead of the skype mobile app
The skype panel version is simply a Skype app (with earpiece output support) + panel. So, you can still use the panel version without panel by calling the app directly.
jackleung said:
The skype panel version is simply a Skype app (with earpiece output support) + panel. So, you can still use the panel version without panel by calling the app directly.
Click to expand...
Click to collapse
I was hoping that was possible, but a few of the last roms I used that had skype installed skype still used the speaker. Is there a .cab that exists anywhere with the special xperia earpiece fixed version of skype that doesnt install the panel?
narcotichobo said:
I was hoping that was possible, but a few of the last roms I used that had skype installed skype still used the speaker. Is there a .cab that exists anywhere with the special xperia earpiece fixed version of skype that doesnt install the panel?
Click to expand...
Click to collapse
skype panel app fixed all things
but u can search a patch from xda forum for generic skype ...
Does Skype Mobile for Xperia have file transfer? (Skype 3.0 got it, tho).
But the Skype Mobile for Xperia version is just so much better with the correct audiorouting. I really wonder, why people are cooking ROMs for Xperia without the special Skype Xperia app.
Driver posted below is only for X1. Don't install it on other devices!!!
Don't know where should I post it, but I think it is more suitable for ROM Dev forum.
Everyone who tried to record calls on X1 knows that our phone records only YOUR voice,
and you hear your friend's voice badly. Driver posted below fixes this problem.
Installing:
0) Full backup (use SPB Backup, for example)! I don't take any responsibility for broken phones!
1) Install driverwiz_2wayrecording.cab
2) Soft-Reset
After that you'll get "Record" menu item during calls, also you will be able to use third party recorders like Resco Audio Recorder, Vito Audio Notes and so on.
Quality isn't as great as when you record only one line, but it is much better than it was before.
You are free to use this driver in your ROM if:
1) post a link to this topic and write a little patch's description in one of the first posts of your topic.
2) write author's nickname ("ultrashot" )
UPD (5th of september):
Added cab made by DriverWiz util, with it you don't have to install NewSDKCerts.cab, so it means less problems with certificates.
7th of september:
deleted old cab and certs, use only driverwiz created one.
v1.2:
http://forum.xda-developers.com/showpost.php?p=8434567&postcount=44
Wow, it's a new and fresh driver for record. Great to UltraShot. (Is it the same name on s*nse??)
dna_voluntatis said:
Great to UltraShot. (Is it the same name on s*nse??)
Click to expand...
Click to collapse
yes, that's me
Cool! Thanks for sharing bro !
ultrashot said:
yes, that's me
Click to expand...
Click to collapse
Wooow, it's a nice to see you in these thread, You're my Fav Master (Many thanks for the ELF)
Oops, seems vulcan dialer can't record at all...
Ethermind, download Resco Audio Recorder or Vito Audio Notes, they can record.
anyone using energy rom tested this driver yet? please specify your rom and version used to test this driver. I'm going to backup my energy rom b4 test this one now thnks ultrashot
Ethermind said:
Oops, seems vulcan dialer can't record at all...
Click to expand...
Click to collapse
Same to me, my X2 didn't have any audio when install this sdk.
yesternova, it is only for X1, that's why it is posted in X1 section.
Ethermind means that vulcan's dialer doesn't have "record" button in dialer (he tests it on X1)
No sound on my X1, stock ROM R3 hixx
womanizerzz said:
No sound on my X1, stock ROM R3 hixx
Click to expand...
Click to collapse
Have you installed NewSDKCerts.cab? No sound (on x1) means certificate problem.
However I haven't tried it on stock ROM, only on ROM without certificate checking.
Thanks. I can finally record.
little update:
added cab made by DriverWiz utility, it should install better and more reliably on stock roms.
Thank you. My phone was ok with new cab, I dunno why i had problem with installed sdkcert.cab
ultrashot this is awesome! Unfortunately for me a bit to late as I have moved from the X1.
2-way-In Call for X1/plz specify engines for which these drivers are!...
Hello,
onto my Leo HD2 these drivers caused a complete fail of sounds, even phone didn't ring any more. So I had to perform a hard-reset, thus wasting my time. Fortunatedly Iade a complete system-backup before installing these not-functionning drivers. Please be so kind to tell in future, for which phones your drivers are written for. Thanks!! Inuli
inuli said:
Hello,
onto my Leo HD2 these drivers caused a complete fail of sounds, even phone didn't ring any more. So I had to perform a hard-reset, thus wasting my time. Fortunatedly Iade a complete system-backup before installing these not-functionning drivers. Please be so kind to tell in future, for which phones your drivers are written for. Thanks!! Inuli
Click to expand...
Click to collapse
That's completely your fault!!! Didnt you see the tittle say "[DRIVER] 2-Way In-Call recording on X1" ????
On HD2 you dont need to modify the driver, just add this key and it should work!
[HKLM\Drivers\BuiltIn\WaveDev]
MixModeRecord=1
Thanks, I have tested and it works on Laurenti's ROM.
Work on Jack's 5.x ROM too. Any idea how to decrease a little bit the other party voice level? It is recorded way to loud with too much distortions leaving no room for my voice. It's like 130% with 70% ! Maybe a tweak in registry or something? Thanks!