[Q] Can I get into Recovery Mode without a Home Button? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey there,
I made a stupid mistake last night. I flashed TAJB V6 without the superuser Zip-file. Now I don't have root access on my I9000. Is there any way to get my Galaxy S into Recovery Mode without my Home Button? It broke last week, I think sweat entered during my workout.
Since then I used to get into Recovery with the Rom Manager, but this way it isn't working anymore because I don't have root
I know I could get into DL-Mode with the Jig but I don't have one here right now.
So, if there is any possible way to get into DL-Mode or Recovery without a Home Button and the jig I would be really pleased to know.
Thanks alot guys

Thread can be closed :good:
I managed to get into recovery via ADB

Related

Help 2 day old Captivate Freezing up.

I have a Samsung Captivate and was able to sim unlock nd then root everything was running great, but because i wanted to change the rom and get rid of the AT&T bloatware I decided to install SRE rom from this site but first i had to install rom manager from the market, & install Clockwork Mod which i did so far so good. I go ahead watch the video follow it step by step except i didn't wipe data then install rom. So i decided to kinda start over i booted into recovery wiped data then attempted to install SRE rom again and that's when all hell broke loose phone freezing up on the home screen, not completing its boot process, rebooting by itself, i tried removing Sim card, Microsd, but still not allowing me to reboot into recovery with the key combo or ne other way for that matter. I then tried odin one click to reinstall factory everything but no luck. Sorry for the long story just trying to put it all out there. O yeah i'm a newb incase you couldn't tell. I don't have insurance to try to return to at&t. Thank you in advance for any and all help you may provide.
one_cam_vtec said:
I have a Samsung Captivate and was able to sim unlock nd then root everything was running great, but because i wanted to change the rom and get rid of the AT&T bloatware I decided to install SRE rom from this site but first i had to install rom manager from the market, & install Clockwork Mod which i did so far so good. I go ahead watch the video follow it step by step except i didn't wipe data then install rom. So i decided to kinda start over i booted into recovery wiped data then attempted to install SRE rom again and that's when all hell broke loose phone freezing up on the home screen, not completing its boot process, rebooting by itself, i tried removing Sim card, Microsd, but still not allowing me to reboot into recovery with the key combo or ne other way for that matter. I then tried odin one click to reinstall factory everything but no luck. Sorry for the long story just trying to put it all out there. O yeah i'm a newb incase you couldn't tell. I don't have insurance to try to return to at&t. Thank you in advance for any and all help you may provide.
Click to expand...
Click to collapse
try getting your phone into download mode. If you can do that then use odin to flash everything to stock.
Are you able to get adb to access the phone? You can access recovery from there with the following command:
Code:
adb reboot recovery
Also, are you getting into download mode when trying Odin 1-click? I've found a pretty fool-proof method pull battery/SIM/SD, putting the battery in, holding down the two volume buttons and then plugging in the USB. Works every time for me, and is easier than it sounds.
I was stuck on a boot loop the other night and that process got me into download mode so I could flash with Odin and then restore my backup.
Worst comes to worst, just bring it to AT&T and say it randomly did that. If it's only two days old, and you're under contract (didn't buy it outright) you don't need insurance. I don't even think insurance is available for this phone.
take out the battery, plug in the usb, put the battery back in, hold both volume buttons down, then hold the power button down... the grey/green battery icon will flash to a black screen, as soon as it flashes to the black screen the second time, let the power button go, and download mode should be there.
@rrrrrramos i do not have a contract with them. I obtained this phone through a friend that does have insurance for the handset. Since my computer does not recognize it i am not able to adb.
@magnumrt62 & rrrrramos I have tried these button, usb combos and nothing. I appreciate all the responses i will con't to try and seek psychiatric help...lol.
How would i know i am in dl mode? All it does when i let go of the power button after the second blk screen is nothing but show green battery nd con't to charge then goes to black screen. Computer doesn't recognize it.
Are you using the SRE with voodoo in it, if so that is not playing nice with ROM Manager, it is a known issue that Clockwork Mod dosen't recognize ext4. Sounds like that may be the issue. read this thread http://forum.xda-developers.com/showthread.php?t=784170
It sound like that is the problem.
I am unable to mount/unmount the internal/external sd cards because the phone freezes and does not allow for this. The few times i was able to get odin to recognize phone com3 i hit masterclear left it alone and 6hrs later it had done nothing. I can't even get into recovery mode. I am about to see if this beautiful phone will fly then bounce... O how a grown man wants to cry over his phone... LMAO... Can ne 1 close to orlando, kissimme, poincianna help a fellow Captivate lover out i got beer money, gas money, i'll drive too you. hell i'll even cook a new york strip or two.. HELP ME PLEASE..
To do master clear your have to be in usb debug mode and at the home screen. Fire up odin then plug the phone in odin will see the phone and then hit master clear. It will then wipe the phone
Sent from my Samsung Captivate w/Voodoo using XDA App
Thats where the phone freezes up at on the home screen and just stays stuck there. The last time I was able to get into the phone i switched on usb debugging but still nothing. I just booted up the phone and heard the sweet bing sound but still doesn't show up.. I really appreciate every1 taking time out to try to help me.. Just wanted to put that out there..
So am i one of the unfortunate souls to have "BRICKED" his phone. I will not give up yet.. As long as i see the sweet "S" i will not give up..
I don't think you bricked it. Something is going on with your drivers, if the computer won't recognize it. Obviously your phone has been able to boot into recovery before if you had ClockworkMod on it. Did you get into Recovery using the key combo?
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
You need to use the odin from here: http://forum.xda-developers.com/showthread.php?t=731989 as it is made to specifically use with the captivate. It also includes the jf6 kernael which is critical. I used method 3 for the I-9000 because SRE 1.3 put that kernel on the phone and screwed it up big time, it has different hardware assignments. When you put the battery in, hold volume up and down and plug in the usb, no sim, no external sd when doing this. No other version of odin worded for me, just this one. You can't do a master clear until you are fully booted, I don't care what anyone says, it will never work, besides, you don't need to. You need to hit the "Start" button in odin when it show that you're connected. It will reflash you phone with the proper rom and kernel.
Don't download anything else from there but the odin file, you have the drivers already and don't need the other kernels (what got you here to begin with ). just that version of odin that already has what you need.
Good luck man!
one_cam_vtec said:
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
Click to expand...
Click to collapse
It's great that you can get into recovery mode through adb because that means you can get into download mode: adb reboot download. Then you can flash back to stock with odin.
Also forget about recovery. That's not going to help you right now. You need to be in download mode to use Odin
I'm going to give that a shot when i get home. Why didn't I think about adb reboot download wow guess you can tell i'm a real NEWB.. Thanks i'll let u know how it works out for me..
one_cam_vtec said:
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
Click to expand...
Click to collapse
What is it that you don't understand. Master clear only works when you are at the home screen. You can't evoke it from download mode or recovery. You have to have your phone recognized by odin when you are at your home screen and then you can hit master clear. That is the only way that it will work.
It sounds like adb works so when you are at the home screen and you envoke adb reboot recovery it reboots the phone into recovery correct. If that is working then there should be no reason master clear won't work then. Boot the phone up normally and then run odin 1 click then plug the phone in if odin recognizes the phone then hit master clear and see what it does. It should work.
@ Everyone who suggested things for me to try THANK YOU. I finally got it with the adb reboot download. Didn't know i could do that. @Sparker366 I would envoke adb b4 it got to the home screen as soon as odin recognized it i would envoke commands, because the phone would freeze on me on the home screen Just didn't know about the "download" command. Thanks again every1...

[Q] Question?? Please help!!

Wanting to know if i skip the, go into downloading mode, on the official upgrade will it brick my phone? Im asking this mainly because everything ive tried will not bring my captivate into recovery or dl mode. And i haven't been able to really find any help on getting past the 3 button problem. And samsun recomended i reboot the phone! But hope someone can help, would like to get 2.2 asap!
I recommend fixing your button combo just in case something goes wrong. What firmware is on your phone now? If you have a ROM with the advanced power menu you can use that to get into recovery. You can also use the adb reboot recovery command or use terminal emulator if the phone is rooted and type:
Code:
su
reboot recovery
Then install the attached file. You can also get into download mode the same way, but the first thing I would do is fix the button combos.
Currently I have jf6 cause somehow the ota update was never received! But what would be the best route for fixing my 3button recovery/dl mode? I would love to fix it before updateing to 2.2! Thanks for helping BTW!

stuck on android system recovery 3e

Hey guys... So, I was trying to install a different ROM, but it seem that I ran into a little trouble...
Long story short, Im now stuck in the Android System Recovery <3e> and I can't do anything about it because the HOME BUTTON is broken for a while now...
I ordered a JIG from eBay to get into download mode and install a different ROM without the need of the 3 buttons combo... For now, I need a different solution, if such exists.
Thanks.
Bei60 said:
Hey guys... So, I was trying to install a different ROM, but it seem that I ran into a little trouble...
Long story short, Im now stuck in the Android System Recovery <3e> and I can't do anything about it because the HOME BUTTON is broken for a while now...
I ordered a JIG from eBay to get into download mode and install a different ROM without the need of the 3 buttons combo... For now, I need a different solution, if such exists.
Thanks.
Click to expand...
Click to collapse
http://www.transformerforums.com/fo...overy-bootloop-fix-tested-my-c10-windows.html
Eirwn said:
http://www.transformerforums.com/fo...overy-bootloop-fix-tested-my-c10-windows.html
Click to expand...
Click to collapse
Half of the downloads there are dead and outdated.. I'll try to use Google to complete the guide but for now, if anyone has any other suggestions that would be wonderful.
maybe you can push a rom file like cyanogenmod to the sdcard via adb.
but this requiers root acces on the device
use:
run adb on your pc and connect your device
than tip:
adb push ROMZIP.zip /sdcard/
after that you

[Q] No Recovery mode and No Download mode.

Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
vinte007 said:
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
Click to expand...
Click to collapse
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
BWolf56 said:
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
Click to expand...
Click to collapse
Thank you for your reply. Yes I did try that also. But it just does a normal restart. I tried the the ADB "reboot recovery" also. It also didn't help. I even downloaded an app to reboot into recovery, but no help.
And yesterday I got a jig from my friend, it worked on his infuse but did not work on my Captivate. He said that it might be because he is using a 330K resistor. So I ordered a jig from ebay. It will take some time to reach here.
Is there anything else I can try? maybe push a recovery or something using ADB? Sorry if I am being noob here
Once again, thanks for your support.
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok, I will wait for the jig and when I get it, I will post the result.
Once again Thank you for your help
Aaaand all of a sudden I was wondering, can this be a bootloader problem? Maybe my bootloader got locked somehow or something?
The best thing is still to wait for the Jig or make one, as BWolf56 suggested.
Once ya have the Jig and If u can get into Download Mode with it, I suggest that u flash the One Click Odin or Heimdall Stock Android 2.3.5 i897uckk4 that includes the Bootloaders. (See the stickied One Click thread in the Dev forum, Post #3). If that is successful, do not flash any Bootloaders again. U can then proceed to flash the KK4 Corn Kernel, the .tar version of the kernel v7.0A, through Odin and then use that CWM Recovery that is baked into that kernel to go on flashin other Roms, etc.
If u cannot get into Download Mode with the Jig, then ur micro usb port of ur phone may be the fault. (But still an app should work from the play store to reboot to download or recovery)...anyway that is all i got for now.
Keep us posted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

[Q] [Q&A][G-I9000]Phone wont get past boot logo/wont go into recovery

Hi there! Now, firstly, ive always used Windows Phones but, would like to join Android and discover what it is really like to use... It really does look like fun to use
Anyway, last night i got my mums old Samsung Galaxy S1(G-I9000) and tried to root it and put CyanogenMod on it so i could get arid of the broken TouchWiz(I don't know what the new versions of it are like, but this one was broken and horrible to use) and get updated to Android 4+. Now, the root was successful and i am very happy with myself for doing that.... But here is where it all fell apart....
So, i jumped on their guide on their cyanogenmod wiki and it turns out that doing that first step(The "Installing a custom recovery on Galaxy S") was not needed because i already had ClockWork on my phone and that doing it would apparently break my phone.... I did not realise that till afterwards.
When i tried to reboot into recovery mode to install CM it got stuck on the boot screen. I think to myself maybe its stuffed and ill just reboot it again and see if it work... Nope. Now i try to reboot normally and leave it alone.... Nope. Turns out, all i can do is get into download mode. Now, from what ive found online, using Odin to reflash my phone with the stock ROM is how to fix my phone, problem is, Odin is not finding the phone and Hard Resetting the phone by holding down Lower Volume button and power is not working.... How can i fix this?
I think you can still recover it. However, the reason Odin might not recognize it it's probably because you haven't installed the Samsung USB drivers
If you install them and try to go into Download mode again you might be able to flash the stock ROM back onto your Samsung phone

Categories

Resources