Any ICS ROM where Chrome doesn't crash? - Galaxy Tab 8.9 General

Is there ANY ICS ROM out there with a stable Chrome that doesn't crash or freeze in the middle of writing long texts?
I almost want to go back to HC because of this, but then I can't use Chrome and I kind of like it.

If you have tryed all ics rom's than I don't know!

I haven't. But as far as I know they all have issues with the browser. AOSP GalaxianSoup, AOKP, CM, they all have reports by people saying the browser freezes/crashes/pages stop loading.

Delete pls
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Yeah, maybe. I have to admit, I kept flashing new nightlies without ever wiping or doing a factory reset so I might try this when I get home. Thanks!

I try many ICS roms(>10), none of them make chrome work properly.
But I found one today, the newest cm10 preview 20120723. Chrome work perfectly on my 7310 now.:laugh: Not a ICS rom though

microlueng said:
I try many ICS roms(>10), none of them make chrome work properly.
But I found one today, the newest cm10 preview 20120723. Chrome work perfectly on my 7310 now.:laugh: Not a ICS rom though
Click to expand...
Click to collapse
Even better
Thanks! Wiping everything and reinstalling didn't help so I'm gonna try this one. Anything wrong with that ROM, except the camera not working, I assume?

teomor said:
Even better
Thanks! Wiping everything and reinstalling didn't help so I'm gonna try this one. Anything wrong with that ROM, except the camera not working, I assume?
Click to expand...
Click to collapse
The best rom I have ever tasted, but you need to back up your favorite apps before installing the new rom, because lots of app are not ready for JB in the market, not allowed to install, including chrome

AOSP GalaxianSoup fine with me

Related

Strange camera problem

Whenever I flash a custom ROM from stock eclair, the camera just doesn't work half the time. The camera app would open and it would just be a blank viewfinder. I found that closing and reopening the camera like 3 or 4 times fixes it temporarily. When I leave the phone sitting for a while and try to open the camera, it always opens with the blank viewfinder.
I tried searching about this but I guess it isn't a common issue at all, so if anyone can offer any advice I'd appreciate it
drktigger said:
Whenever I flash a custom ROM from stock eclair, the camera just doesn't work half the time. The camera app would open and it would just be a blank viewfinder. I found that closing and reopening the camera like 3 or 4 times fixes it temporarily. When I leave the phone sitting for a while and try to open the camera, it always opens with the blank viewfinder.
I tried searching about this but I guess it isn't a common issue at all, so if anyone can offer any advice I'd appreciate it
Click to expand...
Click to collapse
Well this really depends on the ROM you are flashing when coming from Eclair, which ROM did you try, and which kernel with that?
Well, I was on Team Hacksung's ICS build 17(icy glitch v14 b6), AOKP(same kernel), Doc's Master(the kernel that came with it), and Slim ICS 3.1(the kernel that came with it). I also tried a custom gingerbread ROM which I can't remember the name of atm.
drktigger said:
Well, I was on Team Hacksung's ICS build 17(icy glitch v14 b6), AOKP(same kernel), Doc's Master(the kernel that came with it), and Slim ICS 3.1(the kernel that came with it). I also tried a custom gingerbread ROM which I can't remember the name of atm.
Click to expand...
Click to collapse
OK, I think the problem is that all of the roms you've been flashing are ics builds and all of the ics builds for the galaxy s are ported at the moment, and because they are ported they don't always work. So my guess is that your camera doesn't work because of your ics builds, why don't you try a ROM built for captivate like fasty ROM or darky ROM or even cyanogenmod7?
Sent from my SAMSUNG-SGH-I777 using XDA
I actually have tried cm7 but the camera would not open at all with that one.
Sent from my SGH-I897 using Tapatalk 2
None of the CM build are made for the captivate, try a rom built from stock and see if the issue happens on that. Maybe try legend rom from crt it is a very good rom based off of stock kk4.
Sent from my SGH-I897 using xda premium
Wdustin1 said:
None of the CM build are made for the captivate, try a rom built from stock and see if the issue happens on that. Maybe try legend rom from crt it is a very good rom based off of stock kk4.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I've tried flashing legend but that got me into a bootloop. I have successfully flashed Simply Stock, but I had the same camera issue.
This was a while ago, but I remember having camera problems as soon as I got the official gingerbread update from froyo. If I remember correctly the camera would always force close as soon as I opened it.
you must have a hardware problem.
camera works fine on ICS for the past 2 months at least. nothing but bad advice in this thread. i am running AOKP right now. used camera today.. used it now.. it works.
cm camera works fine, cm IS built for captivate, or in those thoughts... CM isnt built for any phone..??..
Well, I should also make it clear that the camera always seems to open with no problems on stock eclair or froyo, so yeah... it's a pretty strange case. I don't really want to trade everything else great about ICS and go back to froyo because of my ocd lol.
cm camera works fine, cm IS built for captivate, or in those thoughts... CM isnt built for any phone..??..[/QUOTE]
That's kind of what i meant lol its not a stock build.
Sent from my SGH-I897 using xda premium
Um, so is it unlikely I'll ever be able to fix this issue then?
Had same problem with every ICS rom I've tried. Seems camera only works with LCD density set to 220, at least on my phone. Check if it makes a difference on your phone. Under Settings > ROM Control> General UI> LCD Density

Official CM10

I want to know that the official cm10 has any bugs??
On cm website they call it stable.
mujeeb999 said:
I want to know that the official cm10 has any bugs??
On cm website they call it stable.
Click to expand...
Click to collapse
The best way to know would be to read their thread (last few pages and OP) as well as trying it for yourself.
Not entirely sure if it's related to CM, but only on the latest stable (10.0) I've had issues with my WiFi not wanting to stay connected, even on a strong connection.
Everything else works great!
Sent from my SGH-I897 using xda app-developers app
mujeeb999 said:
I want to know that the official cm10 has any bugs??
On cm website they call it stable.
Click to expand...
Click to collapse
I use it right now. It seem stable
Sent from my SGH-I897 using xda app-developers app
I just installed it yesterday. Problem with mine was that the ASOP keyboard not working. Luckily I just dled teh swiftkey.apk a day earlier. Play store wasn't working for me either and the browser just open and close. That's all i tried. I'm going back to CM9 til I know whats wrong and back up some data.
I installed the stable cm10 and the gapps. Hope others dont run in to the same problem as me
Did you restore your apps or app data? That would most likely cause this problem. Or flashing the wrong gapps.
Sent from my SGH-I897 using xda app-developers app
No, once I got cm10 installed. I was trying to change some of the settings and found "keyboard(ASOP) stopped working" or some error message along the line of that when I try to enter wireless password. After installing swiftkey, I tried opening play store and it just have "server error"
So I haven't gotten to getting titanium backup yet to restore apps
I just took the latest gapps (the first link on the list), so I'm not sure if that's the right one. I'll try again during the weekend. I'll let you guys know if it goes well.
I'm on CM 10 latest stable build, 4.1.2. Came from GB kk4 plus corn 7 kernel. with latest gapps. I use touchpal keyboard.
I have TiBU pro, but rather than batch install apps, I went though google play to install apps, then selectively restored data on apps with TiBU as needed. While this took some time with this approach (96 apps), CM10 is flawless, virtually no probs at all. it actually seems more stable than before.
at times a little laggy but not a showstopper.
Sent from my SGH-I897
(edit: added keyboard info)
UPDATE: Just flashed to CM10 stable. I found out that the GAPPS I used last time was actually for CM10.1.0 while the CM10 that is out is only CM10.0.0
Be sure to get the right version of GAPPS. The latest one they have is for CM10.1.0
laughingT said:
I'm on CM 10 latest stable build, 4.1.2. Came from GB kk4 plus corn 7 kernel. with latest gapps. I use touchpal keyboard.
I have TiBU pro, but rather than batch install apps, I went though google play to install apps, then selectively restored data on apps with TiBU as needed. While this took some time with this approach (96 apps), CM10 is flawless, virtually no probs at all. it actually seems more stable than before.
at times a little laggy but not a showstopper.
Sent from my SGH-I897
(edit: added keyboard info)
Click to expand...
Click to collapse
Looks like I'm the unlucky one den. I'm about to try again. I'm using cm's 3.0.8-g2311908 kernel.
Wish me luck.
you are correct, you want the 10.0.0 version from goo, which points to gapps 4.2, backward compatible to 4.1.
http://goo.im/gapps/gapps-jb-20121011-signed.zip
thats what I used. I guess the 4.2 set the 'latest' bit in my brain.
Sent from my SGH-I897

Google Now for Rooted Stock ICS

Works great on my D4
http://www.droidforums.net/forum/droid-razr/232512-google-now-rooted-droid-razr.html
https://www.youtube.com/watch?v=lZgwya6xX0w
https://www.dropbox.com/s/63kjmkqmu651sig/com.squareonetechsolutions.gnowhandlebars-1.2.apk
didn't work for me. I'm on newest eclipse (gsm)
im stock rooted with a ton of apps frozen.
Does it work on a ROM like Droid4HD?
TechTinker said:
Does it work on a ROM like Droid4HD?
Click to expand...
Click to collapse
I have no idea, its not difficult to try out though.
wheeliest said:
I have no idea, its not difficult to try out though.
Click to expand...
Click to collapse
Ok then, I have a question. You can see I posted a thread earlier using another method from LifeHacker, how do I go about getting this one instead?
i posted a link to a youtube video how-to
Guess this only works for deodexed roms or deodexed versions of stock ics roms?
Worked great. Rooted Stock OTA ICS on Droid 4. However, it says there is an update available, and play store will not install it.
Any idea how to get it?
EDIT: Ok, Most of it worked great, right up until I tried to use my blutooth headset to initiate a call. The voice recognition here was all messed up. Nothing I tried worked, and I tried for 3 days to get a solution. Because I use this function so often, I had to remove this and go back to the standard ICS search. Also noticed it was a serious battery drain. Unfortunate. I really liked it.

[Q] Which post-gingerbread N1 rom is the least buggy? [ANSWERED]

I cant run Gingerbread (GB) because many apps I use do not support such an old Android version.
So it must be between Ice Cream Sandwich (ICS), Jellybean (JB), and Kitkat (KK).
I've tried a few roms and cannot find the buglessness I seek:
[ROM] [4.1.2] [Mar 18 2013] Slim VJ Jelly Bean 4.1.2 - v1.0 for N1
VJ's previous non-slim JB rom
Evervolv's Kitkat
j00m's Kitkat
MIUI.us's unofficial JB port v2.12.28 (considerably worse than the official GB MIUI rom)
reider123's CM10 rom
tommypacker's pixeldroid AOKP kitkat
tommypacker's CM10.1.3 Android 4.2.2 v2.7
parkedraccoon's CM11
Evervolv ICS
All of them contain frustrating bugs. So the search continues to find the most workingest post-gingerbread rom.
Together, I'm sure we can find it! Who's got a lead?
And the winner is...
j00m's kitkat!
I'm using it on a 198/3/235 hboot (system is only 191mb)
one of the only roms besides official Evervolv that has trackball wake toggle (no more pocket wake-ups!)
on my recommendation, j00m replaced the /system/app/Torch.apk with one that stays on after screen turns off.
Tip: enable lock screen widgets in Security settings, and put the torch widget on the lock screen for quick access.
j00m fixed WiFi tethering (w/security set to None only)
i replaced the slow buggy stock kitkat browser with UCbrowser (it's even faster than dolphin)
i turned off the clunky window animations in Developer Options for a snappier experience
i installed the app Videocam Illusion to enable video recording
this is as bug free as it gets. Daily driver ready.
CM-11?
Sent from my Nexus One using xda app-developers app
Hmm, the only decent post-gingerbread ROM I found was Evervolv/J00m's KitKat. It works fine for me, but others haven't had such luck...Evervolv JellyBean (3.2.0 I believe?) was the best alternative, I can't remember what problem caused me to switch back to CM7. I think (if my memory serves me correctly) that one time it was the home button that wouldn't work, but the second time around it worked, I think it had something to do with running out of space, perhaps due to the GAPPS? Anyhow, you might give it a try and see if it works for you. Maybe try to flash the core GAPPS and get the play store to install your stuff instead of the full GAPPS which is way bigger.
I have the same problem with a 4.4 evevolv, the phone restarts constantly and gives me process.media was interrupted.
Leuviah said:
I have the same problem with a 4.4 evevolv, the phone restarts constantly and gives me process.media was interrupted.
Click to expand...
Click to collapse
Do a search, there's a fix for that.
Sent from my Nexus 7
BellaMay95 said:
Hmm, the only decent post-gingerbread ROM I found was Evervolv/J00m's KitKat. It works fine for me, but others haven't had such luck...Evervolv JellyBean (3.2.0 I believe?) was the best alternative, I can't remember what problem caused me to switch back to CM7. I think (if my memory serves me correctly) that one time it was the home button that wouldn't work, but the second time around it worked, I think it had something to do with running out of space, perhaps due to the GAPPS? Anyhow, you might give it a try and see if it works for you. Maybe try to flash the core GAPPS and get the play store to install your stuff instead of the full GAPPS which is way bigger.
Click to expand...
Click to collapse
Maybe I should give Kitkat another try... I remember having a delay to answer the phone on Kitkat... one time I kept waiting for the screen to turn on while it was ringing and ringing, and eventually i missed the call cuz there was no way to answer it.
Leuviah said:
I have the same problem with a 4.4 evevolv, the phone restarts constantly and gives me process.media was interrupted.
Click to expand...
Click to collapse
Actually, the solution isn't as easy to find as I remember. What worked for me was to clear data of media storage: Settings > Apps > All > Media Storage. Others have reported that they had to clear data of Contacts and Contacts Storage located in the same place.
Sent from my Nexus 5
PhilipTD said:
Actually, the solution isn't as easy to find as I remember. What worked for me was to clear data of media storage: Settings > Apps > All > Media Storage. Others have reported that they had to clear data of Contacts and Contacts Storage located in the same place.
Sent from my Nexus 5
Click to expand...
Click to collapse
I can not even get there, and it freezes before it restarts.
That recovery is to be used with black roses to install the 4.4?
Because the CM11 at the time of the flash failed?
Leuviah said:
I can not even get there, and it freezes before it restarts...
Click to expand...
Click to collapse
But you can reboot?
Are you on 4EXT recovery? Have you tried Evervolv KitKat 4.4.2?
Sent from my Nexus 5
PhilipTD said:
But you can reboot?
Are you on 4EXT recovery? Have you tried Evervolv KitKat 4.4.2?
Sent from my Nexus 5
Click to expand...
Click to collapse
You've tried the Evolv 4.4 kitkat, continually reboots and tells me that android.process.media was interrupted.
Now I installed the 11 cm, everything ok, except that the gapps did not install, and when I open mount2sd asks me to install a script, do the procedure but do not install and I get this error: Failed to reboot the device into recovery because the limitation of the rail toolbox
The 31-12-13 built is not useful at all. Its the worst. Try CM 11 an wait a few days for a update.
Nexus One using xda app
so the problem is the rom, gapps or are incompatible? if I wanted to put the Evolv, I have to change the hboot with blackrose? how do you?
Try evervolv ics rom. It is the least buggy and fastest rom there
Sent from my One S using xda app-developers app
cannondaleV2000 said:
Try evervolv ics rom. It is the least buggy and fastest rom there
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
This one?
Sent from my Nexus 5
How do I flash a hboot other than the stock black rose?
I lose my black roses?
There is no way to solve for the gapps?
cannondaleV2000 said:
Try evervolv ics rom. It is the least buggy and fastest rom there
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I'll give it a try.
@PhilipTD, yep, I think that's the one: [ROM] [DEV] [ICS 4.0.4] *7/1* Evervolv's Aosp TexasIce Cream Sandwich
hboot 220/10/206
I found a working download link to the final version of Evervolv's ICS rom (Evervolv-Perdo-2.2.0-Final-passion.zip): http://evervolv.codefi.re/builds/release/Perdo/
And its corresponding gapps: http://d-h.st/AxV
I tested Evervolv's ICS and immediately found 2 bugs that have been haunting me:
Cant play videos embedded in webpages.
Pressing the trackball to take a photo always requires 2 presses for the first photo.
So I gave the latest j00m's Kitkat another try, and while it's not bugless...
it seems to be the ONLY post-gingerbread rom that can play videos embedded in webpages.
Still has the camera-trackball bug. (is this bug present only in evervolv-based roms?)
Videocam illusion app works on EVERY rom for video recording.
Kitkat at least has the potential of fixing bugs as it is currently receiving very frequent updates.
So I think j00m's Kitkat is the way to go.
abemore said:
I tested Evervolv's ICS and immediately found 2 bugs that have been haunting me:
Cant play videos embedded in webpages.
Pressing the trackball to take a photo always requires 2 presses for the first photo.
So I gave the latest j00m's Kitkat another try, and while it's not bugless...
it seems to be the ONLY post-gingerbread rom that can play videos embedded in webpages.
Still has the camera-trackball bug. (is this bug present only in evervolv-based roms?)
Videocam illusion app works on EVERY rom for video recording.
Kitkat at least has the potential of fixing bugs as it is currently receiving very frequent updates.
So I think j00m's Kitkat is the way to go.
Click to expand...
Click to collapse
j00m's KitKat is really good. The only reason I switched to Evervolv's was because I wanted to try out ART on my device and that setting had been removed from the j00m's nightly...but ART doesn't work on my phone so they're both good for me. I might go back to j00m at some point since it is simpler to flash (don't need to flash GAPPS on top!) - plus it has a boot animation that has a clear start so I know whether my phone is in a bootloop or simply taking forever to load.
BellaMay95 said:
j00m's KitKat is really good. The only reason I switched to Evervolv's was because I wanted to try out ART on my device and that setting had been removed from the j00m's nightly...but ART doesn't work on my phone so they're both good for me. I might go back to j00m at some point since it is simpler to flash (don't need to flash GAPPS on top!) - plus it has a boot animation that has a clear start so I know whether my phone is in a bootloop or simply taking forever to load.
Click to expand...
Click to collapse
Additionally, j00m's rom is slimmed down to only 211MB system which means it should work perfectly on the ICS hboot - 220/10/206 saving lots of space!
The stock kitkat web browser is barely usable. Chrome browser is even worse. Thankfully, the Dolphin Browser works really well!
abemore said:
Additionally, j00m's rom is slimmed down to only 211MB system which means it should work perfectly on the ICS hboot - 220/10/206 saving lots of space!
The stock kitkat web browser is barely usable. Chrome browser is even worse. Thankfully, the Dolphin Browser works really well!
Click to expand...
Click to collapse
I've generally felt VJ's v6.0 4.2.2 was the slickest version of JB that I've used till date on my N1.
I've used PixelDroid, Carbon, PACMan, ParanoidAndoid and Evervolv. But while these ROMs are customizable and have different features, VJ's ROM had the perfect (imho) blend of CM and Vanilla Android which was right for me.
Video recording and Tethering won't work but the rest of the features are pretty cool. As far as KK ROMs are concerned, they are still not as smooth nor as stable as the JBs yet. I've only started playing around with @parkedraccoon's CM 11 and @texasice's 4.4. I expect better updates to follow.

New to Atrix HD, Please guide

Hi there,
Ok so I just bought this device in dirt cheap. Its Atrix HD MB886 AT&T running on stock 4.1.1
So I have a couple of problems with this device. For the past few weeks I have been running it on completely stock rom, however I've rooted and unlocked the bootloader. It lags a lot. From homescreen if you just swipe to the left to go in quick settings menu it stutters a bit. It stutters sometimes in the app drawer as well. Someone told me that its stock launcher is laggy so I installed Nova Launcher and it was fine for a week or so then same things started to happen. I've just installed apps like facebook messenger, Twitter, Instagram, Whatsapp, Viber and 1 or 2 very light games and my free ram is around 100mb. I've factory resetted the phone countless times and regularly clear the system cache but the problem still persists. So my question is, If I install custom roms on this device will my experience get any better or will it be the same. Thanks please reply
Have you debloated it?
Sent from my MB886 using XDA Free mobile app
Outlaw92 said:
So my question is, If I install custom roms on this device will my experience get any better or will it be the same. Thanks please reply
Click to expand...
Click to collapse
Short answer: Yes, your experience will definitely get better.
But realize that you're living on the edge and there may be random things that may/not work, so you need to get involved with the forums to troubleshoot errors, or wait it out and hope that later versions fix your problems. I'm running a recent building of CM11 with no issues. Battery isn't quite as good as stock, but overall I'm happy with it. Very snappy, no lag, and lots of customization. Enjoy.
bmatney said:
Have you debloated it?
Sent from my MB886 using XDA Free mobile app
Click to expand...
Click to collapse
No I haven't. I will eventually get rid of bloatware but I wanted to try the phone with it.
quasihellfish said:
Short answer: Yes, your experience will definitely get better.
But realize that you're living on the edge and there may be random things that may/not work, so you need to get involved with the forums to troubleshoot errors, or wait it out and hope that later versions fix your problems. I'm running a recent building of CM11 with no issues. Battery isn't quite as good as stock, but overall I'm happy with it. Very snappy, no lag, and lots of customization. Enjoy.
Click to expand...
Click to collapse
Thanks. Can you link me which rom you're using? There are so many roms here and I'm kinda confused which one to go for.
Outlaw92 said:
Thanks. Can you link me which rom you're using? There are so many roms here and I'm kinda confused which one to go for.
Click to expand...
Click to collapse
It's in my sig. Currently using Epinter's build of CM11, specifically because it works with the older JB bootloaders (like on the Atrix HD). When this phone officially gets KitKat from Motorola, we won't need the special build anymore, and can just go back to using any msm8960 unified ROM.
I would recommend you to use CM 10.2....it is stupidly awesome and it has the best battery life ever..
Please help Me.
I have try to install OS via RDS Lite in that time im getting a message saying failed flashing process 1/ 24 flash partition gpt.main0 bin" -> Phone returend FAIL .
Please help me some regarding this matter.
kthisaru said:
I have try to install OS via RDS Lite in that time im getting a message saying failed flashing process 1/ 24 flash partition gpt.main0 bin" -> Phone returend FAIL .
Please help me some regarding this matter.
Click to expand...
Click to collapse
Do you have an unlocked bootloader? If not, you cannot flash stock ICS if your phone has stock JB. With an unlocked bootloader, you can install stock ICS.
You are getting the error because you didn't edit or properly edit the XML file in the ROM.
http://forum.xda-developers.com/showthread.php?t=2231249

Categories

Resources