I bought what i thought were a couple higher quality universal chargers. They charge my razr fast but won't charge my nexus 7 at all. I have one of the chargers pulled apart but before I do any soldering I want to make sure -- if I cross the 2 data points will it work?
Well I couldn't wait 10 minutes so I tried. Answer: no. Wtf?
Can anyone tell me how to hack these chargers to make them work? Is there a resistor I need to remove?
Isn't it more likely to be a software thing?
With my samsung Tab 7.7 i couldn't charge it using my ipad charger until a Dev modded the software on the tablet.
are they 2Amp chargers? most universal chargers are only 1Amp
Well whatever the problem is, I want to charge my tablet in more than one place, I want to charge it faster than the 16 hours generic chargers are taking, and I don't want to pay $30 for OEM chargers.
If your tablet is taking 16 hours to fully charge, return it. I can drain mine after heavy use of the day and its still fully charged in under 6 hours.
Sent from my Nexus 7 using xda app-developers app
@soldeus: There's nothing wrong with my tablet. The OEM charger works fine and some of my generic chargers work, they just don't have the current. (See below)
@vivan: They are 1A chargers, but they should still work. They don't charge at all. The 500ma Blackberry charger I'm using here at work will charge it in about 8 hours.
Ironically the move to almost-universal micro usb chargers has made the market for them even worse. Now, instead of having to buy a new charger every time you buy a new phone, you have to buy a dozen different chargers till you find one that actually works. Like I said, I didn't try to cheap out. I got a high quality charger.
qoncept said:
@soldeus: There's nothing wrong with my tablet. The OEM charger works fine and some of my generic chargers work, they just don't have the current. (See below)
@vivan: They are 1A chargers, but they should still work. They don't charge at all. The 500ma Blackberry charger I'm using here at work will charge it in about 8 hours.
Ironically the move to almost-universal micro usb chargers has made the market for them even worse. Now, instead of having to buy a new charger every time you buy a new phone, you have to buy a dozen different chargers till you find one that actually works. Like I said, I didn't try to cheap out. I got a high quality charger.
Click to expand...
Click to collapse
The OEM charger is 2A for a reason. Because the tablet uses more power, it needs more current to charge at a fast pace.
Your generic 1A chargers are probably just enough to keep the tablet powered on, without draining (or charging) the battery.
If you can find a 2A universal charger, it should work just like the OEM one.
reiji said:
The OEM charger is 2A for a reason. Because the tablet uses more power, it needs more current to charge at a fast pace.
Your generic 1A chargers are probably just enough to keep the tablet powered on, without draining (or charging) the battery.
If you can find a 2A universal charger, it should work just like the OEM one.
Click to expand...
Click to collapse
No, my 1A chargers are doing NOTHING at all. I plug it in and the charging icon doesn't come on. Reviews have tested these chargers at about 950ma and as I said, my 500ma Blackberry charger isn't too bad.. It's not lack of power, it's something else.
My guess is it has whatever resistor it needs to make it an "ipad" charger. And the vast majority of 2A chargers will, too.
So.. back to my original question: what do I need to do to make this charger charge my tablet? I KNOW it's possible. I just need to find the guy who can tell me how.
I also need a charger for my car, my usb power adapter in the car does not work, need to know what car charger will work as this tablet is supposed to be my car stereo replacement, sucks having to bring your stereo in to charge it and hope it lasts till you get done work
I bought the Scosche dual 10 Watt car charger, isn't here yet though. It does say it wont charge the Samsung tablets, maybe due to the proprietary cord because apparently there is a cord that works with them. It's not a specific ipad charger and does say it works with Android devices and tablets.
On a side note, what's the best way to determine what your N7 is actually charging at?
Both of my generic chargers won't work either, a 2.1A generic iPad charger, and a 1A standard USB charger. Considering it WILL charge off a 500ma USB port, it's not a current/amperage issue, it's a software/proprietary hardware issue.
b22ri22an said:
I also need a charger for my car, my usb power adapter in the car does not work, need to know what car charger will work as this tablet is supposed to be my car stereo replacement, sucks having to bring your stereo in to charge it and hope it lasts till you get done work
Click to expand...
Click to collapse
I use a verizon branded car charger to charge my N7 but I think they charge $30 for it at the vzw store.
I suggest you read this page as it may have some info to help you modify your charger:
http://www.ladyada.net/make/mintyboost/icharge.html
neilrl79 said:
I use a verizon branded car charger to charge my N7 but I think they charge $30 for it at the vzw store.
Click to expand...
Click to collapse
the cost isn't so much the issue, its the actually working part. do they have one with an angled micro usb so i can mount the tablet in the car properly or preferably a usb adapter one where i can use my own cord
For $30 you could order a handful of different ones on ebay or monoprice and find something that works. But I want a dual charger.
grim82 said:
I suggest you read this page as it may have some info to help you modify your charger:
http://www.ladyada.net/make/mintyboost/icharge.html
Click to expand...
Click to collapse
does that mean a usb adapter that is certified to work with an ipad will work for my n7
b22ri22an said:
does that mean a usb adapter that is certified to work with an ipad will work for my n7
Click to expand...
Click to collapse
I won't say 100% but I would bet the probability is very high. For the 1A charging they all seemed to play the same game with the voltage on the data lines. Not sure you'll get 2A but you'll at least get 1A.
Edit... maybe not, see this thread:
http://forum.xda-developers.com/showthread.php?t=1781680
I have a philips as351 audio dock that pushes 2A out of the micro-usb charger and the usb port on the back and neither will charge the N7. Bummer because it looks so nice on the dock to
Related
anyone found an alternative car charger, I dont mean using the wall charger with an inverter
but a charger that plugs into the lighter plug?
Contra1971 said:
anyone found an alternative car charger, I dont mean using the wall charger with an inverter
but a charger that plugs into the lighter plug?
Click to expand...
Click to collapse
I used this on my Palm Pre. It charges my Epic 4g, and I tried it out on the Nook Color this AM.
It worked just fine.
http://cgi.ebay.com/OEM-SPRINT-CAR-...Accessories&hash=item45f6ea76fc#ht_1484wt_905
There's qutie a number of cigarette lighter adapters available that offer a standard USB port. You'd supply your own cable. Here's an example:
http://cgi.ebay.com/Mini-Car-Cigare...053289?pt=PDA_Accessories&hash=item2a0eed35e9
No, AFAIK, none of these will charge as fast as the standard NC charger. For that, you'd need to go thru the hassle of getting an inverter.
Monoprice has cigarette lighter to female usb chargers for $1.16 that you can use your usb cable with.
Sent from my DROIDX using XDA Premium App
well I bought 1 from Wally World and it has a dual USB output abd says it is .5v and 1.5amp but when I plug in my NC it doesnt say charging
does the sprint charger?
Jgrimoldy said:
No, AFAIK, none of these will charge as fast as the standard NC charger. For that, you'd need to go thru the hassle of getting an inverter.
Click to expand...
Click to collapse
Why is that any more of a hassle than getting a car charger?
Contra1971 said:
well I bought 1 from Wally World and it has a dual USB output abd says it is .5v and 1.5amp but when I plug in my NC it doesnt say charging
does the sprint charger?
Click to expand...
Click to collapse
Yes, the Sprint charger says 'charging' As the others stated, it's not fast, but it works just fine...
it isnt more of a hassle, I have 4 inverters, but they all have fans and make noise I wanted to use a NO noise charger thats all
d.v said:
Why is that any more of a hassle than getting a car charger?
Click to expand...
Click to collapse
Larger, heavier, more cords, much more expensive (when compared to a $1 cig-to-usb)...
Just has to be able to push out the current needed. Otherwise it may not charge, or it will charge very slowly.
The Scosche reVIVE II Dual USB Car Charger for iPad has 2.1 and 1.0 amp usb outlets, I use this for plugging in my evo and nc. It definitely charges them both even while having all the wireless radios going and tethering with gps and both screens full bright.
Contra1971 said:
it isnt more of a hassle, I have 4 inverters, but they all have fans and make noise I wanted to use a NO noise charger thats all
Click to expand...
Click to collapse
Same issue here, I have a road-trip coming up this summer and I'd love to load up my NC with music and dash-mount it but it'll be a 14-20 hour drive (depending on the number of whiz breaks the wife and kids need) and I don't think I could push the battery quite that long and the inverter when wired to the radio creates quite a buzzing.
jsw31 said:
The Scosche reVIVE II Dual USB Car Charger for iPad has 2.1 and 1.0 amp usb outlets, I use this for plugging in my evo and nc. It definitely charges them both even while having all the wireless radios going and tethering with gps and both screens full bright.
Click to expand...
Click to collapse
Are you using the Nooks specific cable on the 2.1A connection? I too am going on a trip soon, and would love a car charger that can actually CHARGE the nook while using it..
www.amazon.com/Scosche-reVIVE-Dual-Charger-iPad/dp/B003N7NO4Q
Is this the one you have? It looks nice and the price looks okay. Nice find. I also saw a wall plug dual usb version by same company on the same page, do you have any info on that one too? It would be nice to stream line travel chargers to a minimum, thanks.
It definitely charges both. Like I said in my previous post, I usually have both my Evo runniong and the Nook full bright display on for 50 minute commute, using TetherGPS, wifi hotspot, torque and bluetooth, google navigation pulling satellite imagery, and playing mp3s. Granted, it is slower to charge than without all that stuff running but my previous car charger would lose charge with my evo running just gps and no wifi hotspot previously.
I am using stock blackberry usb cables that I ordered from Amazon as well for $1.25 for a pair (google 'B001UC9NOQ', can't post links yet.) These are nice, thick cables that handle the charger great. I leave them plugged in inside the truck at all times. I have not used that Scosche wall charger, I use the stock chargers for travel that remain in my backpack, and I have other usb cables I use to charge at home. I would imagine it works just as well though.
jsw31 said:
It definitely charges both. Like I said in my previous post, I usually have both my Evo runniong and the Nook full bright display on for 50 minute commute, using TetherGPS, wifi hotspot, torque and bluetooth, google navigation pulling satellite imagery, and playing mp3s.
Click to expand...
Click to collapse
http://www.amazon.com/Scosche-reVIVE-Dual-Charger-iPad/dp/B003N7NO4Q
Luckily I'm used to carrying extra USB cables around but the noise my inverter generated while charging was super annoying, went ahead and ordered this to try it out. Hoping it works for what I need, thanks for the tip
projektdotnet said:
http://www.amazon.com/Scosche-reVIVE-Dual-Charger-iPad/dp/B003N7NO4Q
Luckily I'm used to carrying extra USB cables around but the noise my inverter generated while charging was super annoying, went ahead and ordered this to try it out. Hoping it works for what I need, thanks for the tip
Click to expand...
Click to collapse
Let us know if it works for you. An Amazon reviewer just reported that the Scosche reVIVE II didn't work on their Nook Color:
The nook color needs 1.9 amps, this can't do it. Scosche claims 2.1 amps but it isn't even close. It BARELY charges the nook if the machine is sleeping, when on, the battery charge goes down even while supposedly "charging." Playing video, it's even worse. On top of that if I try to charge a regular phone it puts out too much amperage on the 1 amp side and overheats the phone. Save your money, look elsewhere.
Click to expand...
Click to collapse
However, the reviewer may not know what they're talking about. A charger cannot put out "too much amperage." Too much voltage perhaps, but not too much amperage (current). A device draws only the current it needs.
An iPad needs an amperage around 2 A also. I got the Belkin Charge 2.1 made for the ipod/ipad and it DOES charge the nook color. It has a 12V plug with one USB outlet at 2.1A. I used the cable from the nook color obviously...
See, part of my worry is not the current output, but if the nook can actually communicate with these chargers and get a full 1.9A draw, instead of the detault 500mA over non B&N chargers...
cybrdmn said:
An iPad needs an amperage around 2 A also. I got the Belkin Charge 2.1 made for the ipod/ipad and it DOES charge the nook color. It has a 12V plug with one USB outlet at 2.1A. I used the cable from the nook color obviously...
Click to expand...
Click to collapse
I bought the same Belkin iPad charger from Best Buy. Rated at 2.1A. I used it with the B & N USB cable that came with my Nook Color. I used the 'Battery Monitor' software mentioned earlier here or on another post to compare charge current readings against the stock B&N wall charger/cable. The Belkin was charging right at 500 mA (NC was using ~450 mA, software showing +36 mA current). So somewhere the B & N cable & charger must have a unique way of determining that it is a B&N charger / cable and to allow the full 2.1A charge. I used the Belkin 12V charger on my TomTom and it allowed just over 1A charge, so I know the Belkin iPad charger is fine.
Yes, it does charge the Nook Color, if you are at 800 Mhz and minimum brightness running non-intensive applications--and it barely charges at that ~50 mA. It does turn the charge indicator on the B&N cable orange, and the status indicates battery charge on the screen.
I was just wondering if anyone here has spotted a Nexus 7 car charger? Does it not matter if it's not specifically made for the Nexus 7? I'm trying to find one to buy online and I'm having some troubles. First post here I think I came to the right place though. :laugh:
Silversub745 said:
I was just wondering if anyone here has spotted a Nexus 7 car charger? Does it not matter if it's not specifically made for the Nexus 7? I'm trying to find one to buy online and I'm having some troubles. First post here I think I came to the right place though. :laugh:
Click to expand...
Click to collapse
Clicked thanks on accident lol. Any USB car charger should work, but I would make sure you grap a 1 amp one just so it has enough output to charge the tablet at a decent rate.
probably better with a 2amp one. samsung makes one for the tab2, about $12 on amazon, and just use your own microusb cable to connect to it.
vroomr4 said:
probably better with a 2amp one. samsung makes one for the tab2, about $12 on amazon, and just use your own microusb cable to connect to it.
Click to expand...
Click to collapse
Heck, I didn't even know they had 2 amp ones.
vroomr4 said:
probably better with a 2amp one. samsung makes one for the tab2, about $12 on amazon, and just use your own microusb cable to connect to it.
Click to expand...
Click to collapse
Yup, go with a 2Amp one. Most of the cigarette lighter usb chargers are 2.1A.
Avoid the cheap Chinese 2+Amp car chargers, they can be so badly made they cause enough interference to wipe out your FM radio.
/edit 1Amp will be fine but don't go lower, the N7 would likely burn it out.
FYI I tried a 5v 1a wall charger and my gnex7 said f u wouldn't take the charge. 2a or nothing I say
Sent from my Nexus 7 using xda app-developers app
Troute said:
Avoid the cheap Chinese 2+Amp car chargers, they can be so badly made they cause enough interference to wipe out your FM radio.
/edit 1Amp will be fine but don't go lower, the N7 would likely burn it out.
Click to expand...
Click to collapse
Do you already have the Nexus 7? If so, can you take a look at the charger and see if rated at 1A output and/or try to charge it with a charger that came with your phone?
I am just curious if it can actually charge with less than 2A. The charger listed in the Play Store outputs 2Amps and I thought most tablets require 2A to charge.
https://play.google.com/store/devic...sMSwyLDExMSwiZGV2aWNlLW5leHVzXzdfY2hhcmdlciJd
Fusion777 said:
FYI I tried a 5v 1a wall charger and my gnex7 said f u wouldn't take the charge. 2a or nothing I say
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for verifying.
gsrrr said:
Do you already have the Nexus 7? If so, can you take a look at the charger and see if rated at 1A output and/or try to charge it with a charger that came with your phone?
Thanks for verifying.
Click to expand...
Click to collapse
Still waiting, should only be a couple of days now though...
I know this is something most people never do...but if you read the manual for the Nexus 7 it says you can charge it on a standard USB port with the Nexus 7 in sleep mode (no doubt because the power draw is much less). Standard USB ports are typically .5A...sometimes less. I would say that's the actual minimum. For the fastest charging 2A is what you want though.
The ASUS charger that comes with the N7 is rated at 2A (10W). I tested an old BlackBerry 0.85A (~4W) micoUSB charger and it seemed to work fine and the N7 didn't complain though I didn't do any scientific tests against the charging rates.
The 0.5A (2.5W) chargers probably won't even charge the unit if you're actively using it.
Cheers,
Kermee
Kermee said:
The ASUS charger that comes with the N7 is rated at 2A (10W). I tested an old BlackBerry 0.85A (~4W) micoUSB charger and it seemed to work fine and the N7 didn't complain though I didn't do any scientific tests against the charging rates.
The 0.5A (2.5W) chargers probably won't even charge the unit if you're actively using it.
Cheers,
Kermee
Click to expand...
Click to collapse
Yeah...read my previous post...the manual says you can charge on a standard usb port (0.5A sometimes less) but only if the Nexus 7 is in sleep mode...ie you're not actively using it. If you can't charge it while connected to USB and it's in the sleep state...then your usb port is probably a low power USB port (<0.5A).
For those looking for a good backup battery charger for it...I recommend this one: http://www.amazon.com/gp/product/B005NGKR54/ref=oh_details_o05_s00_i00
works perfectly with my Nexus 7 (just make sure to use the correct USB out port on it as only one of them is 2A)
DealExtreme Charger
Saw this one on DealExtreme, even come with cable:
http://www.dealextreme.com/p/car-ci...-port-for-google-nexus-7-tablet-146751?item=8
Will be ordering will update when arrives. Also they're carrying Nexus 7 Cables in Pink, Green and Orange.
Was using a Sprint micro-USB plus charger (model PVX8823) with attached cable and standard USB port for 2nd device that I was using for my phone. Output is 0.65Amp which isn't sufficient and will slowly drain the N7 battery while in use. ~$35 at Sprint retail store. Wouldn't recommend for obvious reason.
Fortunately, had a spare Motorola SPN5400A 1Amp I bought with some screen protectors from Amazon because it was cheap like ~$5. 1Amp is sufficiently to maintain the charge while in use at near worse case running 3D games like Dead Trigger, Shadowngun, etc. So, 1Amp is minimum threshold.
You need a charger that:
1) Is capable of 2A (1.5A may be sufficient, 1A is a little too low)
2) Shorts D+ and D- together - This rules out most iPad chargers.
If it says it is made for iPod/iPad it will not work without modifications or adapters.
Samsung tablet chargers will work.
If you take an iPad charger, open it up, and short D+ and D- together, it will work.
dkhilo said:
Saw this one on DealExtreme, even come with cable:
Will be ordering will update when arrives. Also they're carrying Nexus 7 Cables in Pink, Green and Orange.
Click to expand...
Click to collapse
Sorry to bump an old thread but any feedback with that charger? I'm looking for one with 2 port to power both my N7 and my droid razr maxx while in car.
dcpuser said:
Sorry to bump an old thread but any feedback with that charger? I'm looking for one with 2 port to power both my N7 and my droid razr maxx while in car.
Click to expand...
Click to collapse
Most chargers for android phones will work. I use my HTC charger for ,mine and I bought a car charge that has the standard micro USB connector but also has another USB port so I can charge 2 devices at the same time with 1 charging unit. You droid razor charger will work just fine. You just need to locate a charger that is capable of charging 2 devices at the same time such as this one
http://www.amazon.com/GTMax-Metalic-Vehicle-Charger-Adapter/dp/B005X5L8PI
You'll be good to go with this.
Sent from my Nexus 7 using xda premium
dcpuser said:
Sorry to bump an old thread but any feedback with that charger? I'm looking for one with 2 port to power both my N7 and my droid razr maxx while in car.
Click to expand...
Click to collapse
Check out this oem charger from Sprint. Its a dual port charger with a 2a output and you dont have to worry about buying a knock off charger that may or may not perform as expected. It also can be used as a wall charger. Good price too....
http://www.ebay.com/itm/130712043019?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1459wt_1399
So are any of these confirmed 100% to work? the one a few links back (GTMax) says works with iphone, and I thougth that meant would NOT work with N7. So I am confused on what will work, and I am already on my 2nd Nexus7 being I blew out the USB trying a bunch of differnt chargers for the car.
I would like something that is small and can have multiple USB plugged in, but not a show stopper, just hope to find something on Amazon (Prefer Prime) so I can oder with my case today. Really want to use this in the car more (GPS\GoogleMusic..ect.), but with no power not a great option.
Thanks in Advance,
Drops
dkhilo said:
Saw this one on DealExtreme, even come with cable:
In for the orange so it will be easy to spot if misplaced. Thanks!
Click to expand...
Click to collapse
I have this Griffin Dual USB PowerJolt Car Charger and its been working perfectly on all my devices, Playbook, Blackberry 9900, Samsung Galaxy S3, iPhone 3G, iPad 2 and many others but for some reason, this charger just don't want to work with my Nexus 7. I don't know why its so picky and wondering if you guys could help me identify the problem and preferably with a good working solution.
I tried opening it up and follow the advice from http://www.amazon.com/gp/customer-m...m_ciu_pdp_images_0?ie=UTF8&index=0&isremote=0. Both pins are already been soldered together but the Nexus still isn't charging!!
This makes me wonder where's the USB standard? How are some device / chargers so picky? What did the manufacturers do to prevent charging on other devices or charging through a non compatible charger?
- Charles
You may get flamed for this question because chargers have been discussed a LOT in this particular forum. It seems that none of the discussions show up on the first page at the moment.
Do some searching here for chargers but let me refer you to one of the better threads: http://forum.xda-developers.com/showthread.php?t=1791717
short/y said:
You may get flamed for this question because chargers have been discussed a LOT in this particular forum. It seems that none of the discussions show up on the first page at the moment.
Do some searching here for chargers but let me refer you to one of the better threads: http://forum.xda-developers.com/showthread.php?t=1791717
Click to expand...
Click to collapse
Thanks a lot. I did read up all the posting regarding the USB charging issue on the N7 but I still can't find the answers. I read about people having the Griffin PowerJolt and not able to charge their device.
After downloading the Battery Monitor Widget and plugging to my Griffin PowerJolt (short D+, D-), the device is charging (estimate: 384mA) but still not showing as charging. It shows Discharging and Unplugged. I don't think its the USB cable since the cable works on my PC.
So what causes this issue?
- Charles
Your answer is here http://forum.xda-developers.com/showthread.php?p=29983624#post29983624
It doesn't matter why, just that your Griffin does not do a good job of charging. If you want more either buy oem or any charger designed to work with Samsung, those devices should work better.
Troute said:
Your answer is here http://forum.xda-developers.com/showthread.php?p=29983624#post29983624
It doesn't matter why, just that your Griffin does not do a good job of charging. If you want more either buy oem or any charger designed to work with Samsung, those devices should work better.
Click to expand...
Click to collapse
I guess I still blame on the N7 for being so "picky" since the Griffin USB charger charges ALL devices, including iPad, Playbook, Samsung S3, iPhone and Blackberry but just not N7.
- Charles
chaddeus said:
I guess I still blame on the N7 for being so "picky" since the Griffin USB charger charges ALL devices, including iPad, Playbook, Samsung S3, iPhone and Blackberry but just not N7.
- Charles
Click to expand...
Click to collapse
Yep, the Nexus 7 is picky. No question about it. But your chargert *does* charge your Nexus 7, the Nexus just doesn't indicate it's charging.
Personally, I bought two KMASHI chargers from Amazon. It's a 5V 2A charger and it works great. Charges at greater than 1Ah and the N7 indicates it's charging. Won't charge an iPad but it works for me. The one I bought is http://www.amazon.com/gp/product/B008XQYH1G but it shows as unavailable now. I suspect the other KMASHI chargers will work the same, though.
short/y said:
Yep, the Nexus 7 is picky. No question about it. But your chargert *does* charge your Nexus 7, the Nexus just doesn't indicate it's charging.
Personally, I bought two KMASHI chargers from Amazon. It's a 5V 2A charger and it works great. Charges at greater than 1Ah and the N7 indicates it's charging. Won't charge an iPad but it works for me. The one I bought is http://www.amazon.com/gp/product/B008XQYH1G but it shows as unavailable now. I suspect the other KMASHI chargers will work the same, though.
Click to expand...
Click to collapse
It charges it but its slow. Being rated at 1A, its can only charge at 300mA+ so its rather disappointing plus the charging isn't consistent. Sometimes when I plug in, it will charge, sometimes not so its another disappointment. But I guess I quickly adapt it and don't bother too much now.
I can still use my in car Head Unit with a build in USB port. At least I am getting 400mA+ and it shows as charging so I am ok
- Charles
Ive been recommending this Sprint 2A dual usb charger to everyone. Its a OEM charger so you can expect a high quality product that works as it should and it puts out the required juice to rapidly charge the N7. It also has the added benefit of doubling as a wall charger. Ive had mines for about a week so I can confirm it does indeed work! http://www.ebay.com/itm/130712043019?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1459wt_1399
Hey All.. I looked forever to find a solution. The Targus 2A car charger has a small (3") adapter cable that comes with it purportedly for Galaxy Tab. That little cable with the data wires shorted on the device end allows the N7 to be charged from ANY 2A car charger. I'm using the adapter with a Scosche dual 2.1 Amp Car Charger
Adapter picture
Targus Charger
Edit: I just built a usb cable with the data wires shorted on the Nexus end (cut, strip, short micro usb end green and white, remake connections red to red and black to black, insulate splices individually, wrap all in electrical tape or heat shrink for strength and beauty) and it works with all chargers. Took about 20 minutes.
I have numerous chargers at home all of which have charged my evo, gs2, Nexus 7, etc.
Can these be used interchangeable in the Note 2 without harming the charging process?
Thanks
As long as the Voltage is the same (5V) there is no Problem. But you should have a charger at 2 Amper for optimal charging speed.
I just tried charging mine with the normal microUSB charger I use for every other phone I have had and it took 7.5 hours to charge from 5%-62%. I used the stock charger that was in the box and it charged it in 3.5-4 hours no problem. Seems like the charger in the box charges faster.
reading this thread made me curious, my NOTE II should arrive in about a week, I can't tell for myself yet, what is the A (amps) specification mentioned on the original charger?
as i come from HTC, my current chargers go up to 1 A current. witch is the double A a standard USB port will give unless crossover'd .
thanks in advance!
----
in the wiki thread i found the answer, the supplied charger delivers 5 V 2 A output to the device.
WendigoNL said:
what is the A (amps) specification mentioned on the original charger?
Click to expand...
Click to collapse
2A! Same as the Tab 10.1 charger.
Filling a 3100mAh battery requires some grunt.
i think even the usb cable makes a difference..
when i use the stock usb cable with the stock charger ..my s3 would charge up comparatively faster than with the other usb cable connected to the same stock charger.:rolleyes
max.android said:
i think even the usb cable makes a difference..
Click to expand...
Click to collapse
It certainly does! :good:
All electrical cables have some resistance. Very low (but not zero) for quality cables, sometimes quite noticeable for thin and cheap offerings.
From Ohm's Law we know that voltage drop will be proportional to current. A cable with a resistance of just half an ohm will loose about 0.5% at 50mA. That's pretty much nothing. However, at 2000mA the loss reaches 20%.
dude use any charger, just don't use LG charger **** !!!!!
You must use the 5volt 2amp charger and cable provided or a replacement with the same output or youll either be waiting for ever for it to charge or do some damage.
I tryed using my note 1 charger rated at 1amp and guess what? It took about twice as long to charge.
Sent from my GT-N7100 using xda app-developers app
Some of my old 1 Amp chargers aren't happy at all, and will often decide to stop charging randomly.
I though it was something weird with my phone, but after switching chargers it never happened again.
- Frank
USA official charger
This are the images of the official USA charger that will comes when they release the device in USA
And yes its a 2.0A charger, so the SIII charger isn't appropriate for NoteII.
this is the kind of charger used in Canada, USA, and Latin America, i bought this NoteII in Mexico from an authorized Samsung provider, of course factory unlocked 710usd, like 10,900mxn.
Has anyone tried a 3A charger? Just wondering if this would speed up charging even more than the standard 2A charger.
mcdill the pig said:
Has anyone tried a 3A charger? Just wondering if this would speed up charging even more than the standard 2A charger.
Click to expand...
Click to collapse
No, it won't speed it up. It's what the device takes from a charger, and not what a charger can potentially supply. If the device's charging circuit is spec'd for up to 2A current, that's what it will suck out of a charger, not more. You can connect a 30A lab power supply, and it will still be the same 2A (or less) input. To speed up the charging process, you need to mod the charging circuit of the device itself.
Has anyone found a wall charger that they're happy with? I have an Amazon basics 2.1 Amp one that charges OK and shows up as an A/C charger in the battery stats, but it's not as fast as the stock one (which already is slow).
I'd post a link to what I have, but the forum still sees me as a newbie even though I've been lurking around for a few years now.
domlazz said:
Has anyone found a wall charger that they're happy with? I have an Amazon basics 2.1 Amp one that charges OK and shows up as an A/C charger in the battery stats, but it's not as fast as the stock one (which already is slow).
I'd post a link to what I have, but the forum still sees me as a newbie even though I've been lurking around for a few years now.
Click to expand...
Click to collapse
i'm still waiting for the pogo chargers to go back on sale.
fionic said:
i'm still waiting for the pogo chargers to go back on sale.
Click to expand...
Click to collapse
Same... :crying:
If you don't really care about super fast charging time almost all usb wall chargers are the same because of the limitations of a usb cable. Just color, shape, and size might vary
I'm using the my hp Touchpad charger. It seems like it charges faster than the original charger. I'll have to test and see though.
Sent from my Nexus 10 using Tapatalk HD
I bought a pogo charger so it won't take up the micro usb slot and also safer charging with pets (or kids). If I'm lucky it will charge faster too.
the pogo charger uses the original samsung ac adapter though.. it doesn't come with one
I just use any random charger I have (I think I use an old Kindle one right now) and leave it charge while I sleep. I have no complaints and have a POGO on order.
I ordered the Powergen chargers for both the wall and my car. They supply 3.1 amps so whatever the max is that the N10 will take, it will get it.
Search for "powergen 3.1" on Amazon and you'll find both.
I'm using my Asus Transformer Prime charger with mine. It seems to work well.
Sent from my Nexus 10 using xda premium
scooterboy5 said:
I ordered the Powergen chargers for both the wall and my car. They supply 3.1 amps so whatever the max is that the N10 will take, it will get it.
Search for "powergen 3.1" on Amazon and you'll find both.
Click to expand...
Click to collapse
Nice tip - thanks. That and the POGO has to be about as fast as it gets PLUS with the second USB port I will be able to charge my phone and tablet at the same time, same charger.
scooterboy5 said:
I ordered the Powergen chargers for both the wall and my car. They supply 3.1 amps so whatever the max is that the N10 will take, it will get it.
Search for "powergen 3.1" on Amazon and you'll find both.
Click to expand...
Click to collapse
Thanks everyone for your input. I ended up ordering the Powergen 3.1 charger suggested above. I'll report back on what my experience is. I did note that one of the reviews of that item at Amazon says it charges the Nexus 10 well, so my hopes are high.
Next question - anyone know what happens if you plug in the POGO charger and a USB charger at the same time?
Your charger isnt going to make a great deal of difference in charge time. An updated and/or custom kernel will help a LOT more with that.
The AC wall unit isn't a charger, it's the power supply for the charger inside the N10.
Me and another N10 owner measured how much current the N10 draws from the PS and it was less than 1A, so the device isn't even asking anywhere near the max that the PS can supply. Unless there is someother reason and there very well could be, a larger PS "might" be a waste of time/money.
I think the N10 charger uses a special usb protocol which allows it to charger faster than most
invisibro said:
Your charger isnt going to make a great deal of difference in charge time. An updated and/or custom kernel will help a LOT more with that.
Click to expand...
Click to collapse
I'm intrigued; how is that? More importantly, does such a kernel currently exist? I started this thread in search of a second charger that just worked as well as the original one. I'd be happier if could find something that did better than the OEM.
jerryp7 said:
Nice tip - thanks. That and the POGO has to be about as fast as it gets PLUS with the second USB port I will be able to charge my phone and tablet at the same time, same charger.
Click to expand...
Click to collapse
What I can tell you is that both powergen units charge the N10 fine.
What I can't tell you is whether they charge the N10 any faster than the stock wall unit. I haven't done any testing.
I'm expecting my pogo cable any day, maybe I'll do some testing then.
There are so many differing theories here, who knows?
scooterboy5 said:
What I can tell you is that both powergen units charge the N10 fine.
What I can't tell you is whether they charge the N10 any faster than the stock wall unit. I haven't done any testing.
I'm expecting my pogo cable any day, maybe I'll do some testing then.
There are so many differing theories here, who knows?
Click to expand...
Click to collapse
Yes so many, maybe if someone would write to Mr google and ask him he would explains it to us hehehe
I have seen some dual USB port PS that are rated "total" for both "not" each port. How is this PowerGen 3.1?
Just check and it's listed as "shared", so that's 3.1A total.
The description clearly states that each port can supply up to 3.1A. If both are used at once, the 3.1A is shared.