Related
Hello folks,
Well I recently made the switch from iPhone OS to Android , picked up a used Nexus One in pretty good shape, no scratches, like new and what not, the phone is amazing BUT I am having a hard time understanding some stuff (I thought I was getting a stock N1, and it seems it has been loaded w/ custom ROM and is rooted and unlocked. -which not bad in my opinion, but...
I still have some questions, I am trying to update to Froyo 2.2, and im not sure if I will ever get OTA since the phone has been messed around with and if i manually update to 2.2 it will cause trouble.
1) When I boot the phone it shows the "lock" to be opened, so I am assuming it is oem unlocked, the phone has working WiFi tethering (just like in 2.2)
2) also in the menu of the phone there is an app "superuser permission" which thats why assume the phone is also rooted
And finally In the "About phone" I get the following:
firmware 2.1-update1
baseband
32.36.00.28h_4.06.00.12_7
kernel
2.6.34-cyanogenmod
mod version
cyanogenmod-5.0.8-n1-test3
build
epe54b
I have reset the phone to factory settings, but the same info comes up everytime. the phone runs flawless, no lags, overall i love the phone.
And finally if anybody knows please feel free to share, I am trying to open port 80 on the N1 while it is running Wifi tethering and the only way i have found to do this is if the N1 is rooted, correct me if im wrong... i have a rovio that is refusing to connect to the N1s network...
Any positive input will be highly appreciated! thanks!
Your not very confused!
Your phone is unlocked and has root. its running cyanogenmod-5.0.8-n1-test3.
You can install a custom froyo rom without too much of a problem from recovery. Remember to nandroid-backup everything from recovery first.
Get into recovery by holding down the volume down button as you press the power button to power on the phone.
Heres an example of tethering via usb/forwarded port
http://blog.tangorangers.com/2009/02/tetherbot_android_and_slackware_how_to/
you can install 2.2 with no problem but you have to manually do it. you might get a notification for ota's but you won't be able to install them. just install it manually.
Man you guys are awesome! thanks for clearing this up for me.
atomoz said:
Man you guys are awesome! thanks for clearing this up for me.
Click to expand...
Click to collapse
Yeah man, you're money. For a used phone it is set up in possibly the best way possible for someone new to android and ready for you to throw the new CM6 ROM on there. You even have the proper radio already. You're good to go.
You can install Froyo in various ways. If you want total stock you can follow the instructions on this link and let OTA froyo install itself. If you need root you can download that from HERE
This method requires SDK installed with Fastboot on your computer with mandatory USB Drivers.
Or you can go the very easy way and use ROMs that is allready cooked, ready to flash in recovery right over your old ROM, like the link that is in my signature. It works great for me and is pretty much stock with root and a couple of extras you can delete via ADB if you don't need them..
Just download the Rom, drop it on the root of your SD Card and flash away in Recovery. all done!
What you are running is a test version of Cyanogen which is not the stable version. So it seems the previous owner didn't bother flashing it.
Im On Rom CyanogenMod 5.0.8 droid i have lost everything with no back ups of my cellularsouth original rom PLUS I HAVE NO DROID APP MARKET WHAT SO EVER i have a motorola milestone throught cellularsouth and was on the milestone forums and they told me since i have a cdma phone that nothing the moto milestone forums have nothing to do with it that it is the version only due to the hardware could anyone possible give me the file and instructions to help me set my phone back to the original rom and factory settings right out of the box state and yall will never hear from me again ive been over here for hours playing russian roulette wanting to hack this phone and it is no where as simple as jailbreaking and unlocking the iphone I REALLY NEED HELP and if you dont feel like typing call me at 228-697-7467
THANK YOU
I think the first thing you should do is download the new google apps. You can get them through a search. Go back into recovery and flash the Gapps.zip file. You will then have the market and all the google apps. There is a "rule" that any cyanogenmod ROM cannot have the google apps inside it and must be flashed separately. Go back to where you got the ROM and you should be able to find the Gapps.zip file. Try that first. I am not sure how to get you back to stock, but someone might be able to help in that situation.
If you have a custom ROM on the phone, the hard part is over. Just flash the Gapps.zip file and you will be done. Just breathe and relax. All will be fine.
ok but
im new to the going to recovery and flashing files inform me with a little more of that process been looking it up but know one speaks english when it comes to flashing.
I would go to theunlockr.com. That is where I went to learn how to flash ROMs on my Eris. Look under the how to section for your phone and how to flash a custom ROM. It should give you all the info you need there. Try it out. You will end up with a phone that you will want to keep for a while still. Give yourself time to learn and you might be flashing ROMs daily just to try them out. It will become second nature to you. Trust me, it has for me.
You Have Been Alot Of Help But What About Firmware and Base Band Issues
I put this Sapphire rom on my phone figured out how to put all the good apps and stuff back on but now i have firmware 2.2 so does that mean i can go back to and roms that worked with 2.1 or 2.0.1
If you mean you want to go to previous iterations of android, its entirely possible just find the right rom, and concerning baseband, depending on what you mean by that, you will have to go to your carrier to flash your phone if your service isn't working, but a baseband update is available via rom manager, though as far as I know thats only to increase internet speed. Btw, noone should have to play games of chance to find a solution for an android fix, or be having to search for hours, either, android= ease of use and application, also, your completely welcome to these forums, don't let anyone tell you otherwise.
soo my current phone right now is a Samsung stratosphere, well i have been having some big problems with it and well verizon said since i'm a long time and good customer (never ever been late on my bill) they said he will upgrade me to the droid 4 for 50$ without renewing my contract.
i am kinda new to the whole motorola stuff as i have allways had samsung android phones (i had a Motorola Backflip but i sold it 2 months later to get the Samsung captivate so i never got the chance to root it or anything) i noticed these phones have locked bootloaders and is just all pretty much on lock down compared to Samsung phones is that true?
does the droid 4 have root? and does it have custom roms? can you edit Boot animations on this phone with only root? does this phone officially have ICS?
i will be getting my Droid 4 tomorrow morning in the mail and very excited i have not done anything cool with phones since i had my Epic 4G as the stratosphere had no one working on it and only had root and that was that
First off, welcome to the D4! It really is a wonderful piece of hardware. I think you’ll enjoy it.
Now, to answer some of your questions.
1. Yes, the D4 has a locked bootloader. What does this mean? It means we are stuck with the kernel that Moto gives us. It does make it a bit more difficult of the devs but other than that, it’s really not THAT big of a deal. Of course I might not be saying that if I was the one developing ROMs for this thing.
2. The D4 does have root. The Droid 4 Utility makes it a piece of cake. Look for the “Droid 4 Utility Updated” thread in the dev section.
3. The phone does not officially have ICS. Not yet anyways. We have had 4 or 5 ICS leaks from Moto that run really really well so it can’t be far off. I am currently running the .213 ICS leak myself and it has been flawless for me.
4. We do have a few custom ROMs. There a couple of GB based ROMs that run off the stock GB kernel. Those are Eclipse and Arctic. I ran Eclipse for quite a while. Very nice. There is also CM9, AOKP, and Gummy ICS ROMs that run off the stock GB kernel. Your mileage may vary with these as they are a bit buggy from running off an older kernel. We now also have CM9 and AOKP ROMs based off the ICS kernel from the Moto ICS leaks. These are really early builds but I have been running the CM9 build for a few days now and it is surprisingly stable for how new it is.
5. I am not sure about changing boot animations. It seems I have seen somewhere, someone saying that using ROM Toolbox to change the boot animation sent them into a bootloop and they had to restore a backup. Not sure on that though. Haven’t tried it myself.
ok well from the looks of it i wanna go straight to ICS!
how would i go about doing that from Stock non root? i saw the one click root for GB and looks easy but how about ICS with root?
if i do flash the ICS leak and when the official ICS comes out will it brink my phone if i upgrade from ICS leak to ICS official?
it just seems for right now i wanna just have ICS with root and play with custom roms later when the official ICS comes out.
Since you will be going straight from stock the process will be really easy. Just download the latest ICS leak .zip file (currently .213) and stick it on your external sd card. Boot into stock recovery (hold power + volume up + volume down and select recovery), when you get to the little android guy in a box, hit volume up + volume down, then select the option to install from sd card, select the .zip file, let it do its thing and like magic, you’re on the latest Moto ICS leak. Then use the Droid 4 Utility update by jsnweitzel to root.
If you flash the ICS leak you will have to jump though a couple of hoops to get back on the OTA when it finally comes out. The OTA won’t brick your phone, it just won’t install. But there is a thoroughly tested way of jumping from leak to leak that should work to jump to the OTA and be back on the official upgrade path. This functionality is also built into jsnweitzel’s tool.
ok i went to http://www.droidforums.net/forum/dr...leak-kernel-crc-droid-4-build-6-16-213-a.html to download the .213 ICS update but it list 3 things
CRC file,Kernel,Leak
do i need to download the kernel or CRC file as well? or just the Leak file
icebear8 said:
ok i went to http://www.droidforums.net/forum/dr...leak-kernel-crc-droid-4-build-6-16-213-a.html to download the .213 ICS update but it list 3 things
CRC file,Kernel,Leak
which one do i download and put into the SD card and flash?
Click to expand...
Click to collapse
All you will need is the leak as long as you have an external sd card. The kernel is only needed for people jumping from one leak to another and I believe the crc file is for those who do not have a external sd card installed.
ok i see i got that stuff downloaded
now about the Droid 4 utility
i downloaded the tool, but under the number 2 part it says to download the GB 219 fastboot files do i need those as well? i tried downloading them but it seems both links are down
also in that droid 4 utility walkthrough it says to download the kernel for
"2. Get the matching Kernel 6.16.213 (boot.img) here: https://docs.google.com/open?id=0Byw...1J0VFBCY1NBM2M
Unzip this folder and copy the boot.img to the "files" folder of the tool. It must be named "ICSFIX" for the tool to work."
also one more thing how does motorola phones do Backups? is there a CWM to backup my phone in case of a brick?
You will need the GB .219 fastboot files eventually to jump from the leak to the OTA (unless .213 ends up BEING the OTA). But you don’t need them right now since you will already be on unmodified stock GB.
You also do not need the kernel since you are on stock GB. You only need the kernel if you are going from one leak to another.
ok sounds good,
also one more thing how does motorola phones do Backups? is there a CWM to backup my phone in case of a brick?
icebear8 said:
ok sounds good,
also one more thing how does motorola phones do Backups? is there a CWM to backup my phone in case of a brick?
Click to expand...
Click to collapse
Right now we have safestrap recovery. You should find the thread in the dev section. Since you will be on ICS you will want the 2.0 version meant for ICS. You can use this to make a backup as well as to boot into a "safe" system to install ROMs without screwing up you stock "unsafe" system.
i saw the droid razor is getting the ICS update as well, since we have pretty much the same phone are the updates suppose to come out at the same time? are the ICS leaks the same as the Maxx?
Unfortunately no. Moto has stated the D4 will get an ICS update in Q3. With the frequency and quality of the leaks I have to guess that that it will be sooner rather than later but who knows.
Sent from my XT894 using Tapatalk 2
icebear8 said:
ok well from the looks of it i wanna go straight to ICS!
how would i go about doing that from Stock non root? i saw the one click root for GB and looks easy but how about ICS with root?
if i do flash the ICS leak and when the official ICS comes out will it brink my phone if i upgrade from ICS leak to ICS official?
it just seems for right now i wanna just have ICS with root and play with custom roms later when the official ICS comes out.
Click to expand...
Click to collapse
My office just got rid of BB and handed out D4's as replacements and the first thing I did with mine was to install the 213 ICS leak and am NOW happy with the device. Have not rooted it yet, that will happen in the next day or so.
well at first the Rep was not gonna let me have the droid 4 and said that most likely his boss wont give it out because the stratosphere is a cheaper phone (the phones he was gonna give me were the LG lucid,Droid charge,Pantech breakout.
but i told the guy i need a keyboard and that was the only reason why i got the strat for, so the guy said he would try to talk down with his manger and well he comes back and tells me he had good news and his manger said yes to the droid 4 as long as i paid something for it (i said $50) and he said that was fine
but he said he would send me a new backplate along with it but no charger (i got my old one but it is really ****ty and falling apart so i gotta order a OEM from Ebay tonight)
i tried using the search but could not find my question but do we have a list of apps that can be safely debloated from this phone on ICS? i like to have my phone free from Verizons crap along with un needed stuff that just waste battery
^^Also looking for a list of things we can remove to debloat all the [email protected] from verizon (can't even use it anyway since i am in canada!)
First off, unfortunately, most of the bloatware cannot be removed without causing problems. A lot of what moto and VZ builds into these things are interdependent on each other. Plus, the OTA updates look to make sure you still have that crap on your phone before it will update. So, unless you can long press on the app in the app drawer and it gives you an option to uninstall, it's best not to. There are some apps that can safely be uninstalled like, the golf and NFL games. The rest you are better off freezing with a program like Titanium Backup. I haven't seen a list on XDA but there is a good list on DF here: http://www.droidforums.net/forum/droid-4-hacks/198081-bloatware-apps-safe-remove-droid-4-a.html that are safe to freeze. This list was started based on stock GB but most, if not all, should apply to ICS as well. I used it to freeze a bunch of stuff on the .213 ICS leak with no problems.
kwyrt said:
First off, unfortunately, most of the bloatware cannot be removed without causing problems. A lot of what moto and VZ builds into these things are interdependent on each other. Plus, the OTA updates look to make sure you still have that crap on your phone before it will update. So, unless you can long press on the app in the app drawer and it gives you an option to uninstall, it's best not to. There are some apps that can safely be uninstalled like, the golf and NFL games. The rest you are better off freezing with a program like Titanium Backup. I haven't seen a list on XDA but there is a good list on DF here: http://www.droidforums.net/forum/droid-4-hacks/198081-bloatware-apps-safe-remove-droid-4-a.html that are safe to freeze. This list was started based on stock GB but most, if not all, should apply to ICS as well. I used it to freeze a bunch of stuff on the .213 ICS leak with no problems.
Click to expand...
Click to collapse
Keep in mind that you can now "disable" applications natively in ICS. keep in mind that if you updated any of the apps the updates must be uninstalled first. Just go to apps / all apps select the app/bloat you want to disable and select, you guess it, disable.
Never mind i think it was a bad download
question i got my phone charged to 100% my last from goes by 100% to 99,98,97 etc etc but i see on this phone after about 15mins it went from 100% to 90% and then 80 over time does this phone go by 10s?
Hello everyone,
Not quite sure where else to put this, but I can't reply in the android dev thread since I am a new member.
I flashed (using SafeStrap 3.05) the newest stable Avatar rom for D3 (using CM 10.1 and android 4.2.2 I think) and it booted ok, mostly everything seemed to work fine (except for camera but that seems to be expected) however I have absolutely no cell service. Not even just data, but the basic cell service for texts and calls isn't on. I tried doing the Verizon activation call, but it would tell me to turn airplane mode off, (which I did, but it either seemed to turn itself back on or not matter if it was on or off anyways).
Has anyone else had this problem and has a work around for it?
Thank you
apefist said:
Hello everyone,
Not quite sure where else to put this, but I can't reply in the android dev thread since I am a new member.
I flashed (using SafeStrap 3.05) the newest stable Avatar rom for D3 (using CM 10.1 and android 4.2.2 I think) and it booted ok, mostly everything seemed to work fine (except for camera but that seems to be expected) however I have absolutely no cell service. Not even just data, but the basic cell service for texts and calls isn't on. I tried doing the Verizon activation call, but it would tell me to turn airplane mode off, (which I did, but it either seemed to turn itself back on or not matter if it was on or off anyways).
Has anyone else had this problem and has a work around for it?
Thank you
Click to expand...
Click to collapse
Do you have a sim card in the phone? This was an issue with some Jellybean/ICS roms. It happens to me as well. For some reason when placing a sim card in the phone(it doesn't need to be active) it allows your phone to get reception.
pandam00nium said:
Do you have a sim card in the phone? This was an issue with some Jellybean/ICS roms. It happens to me as well. For some reason when placing a sim card in the phone(it doesn't need to be active) it allows your phone to get reception.
Click to expand...
Click to collapse
Hey,
So this actually worked, thanks for the heads up!
step by step
apefist said:
Hello everyone,
Not quite sure where else to put this, but I can't reply in the android dev thread since I am a new member.
I flashed (using SafeStrap 3.05) the newest stable Avatar rom for D3 (using CM 10.1 and android 4.2.2 I think) and it booted ok, mostly everything seemed to work fine (except for camera but that seems to be expected) however I have absolutely no cell service. Not even just data, but the basic cell service for texts and calls isn't on. I tried doing the Verizon activation call, but it would tell me to turn airplane mode off, (which I did, but it either seemed to turn itself back on or not matter if it was on or off anyways).
Has anyone else had this problem and has a work around for it?
Thank you
Click to expand...
Click to collapse
Hey, Glad u got your issue resolved..
i am getting my first Android phone (Droid 3 XT862 Gingerbread 2.3 ) and i want to install a custom rom the same way u have..... i was wondering if you or anyone else on the forum could give me step by step guide on how to go about installing the custom rom with the ability to revert back to my original stock OS wen i need to......
i had posted a thread here http://forum.xda-developers.com/showthread.php?t=2378162 and i got some good advise so far:
you or anyone here could reply with the instructions i need or at least send me a link to a tutorial .... as i said this is my first Android so i really dont want to make any mistakes while doing this..
THANX MUCH !!!!!!!
Tha slayer said:
Hey, Glad u got your issue resolved..
i am getting my first Android phone (Droid 3 XT862 Gingerbread 2.3 ) and i want to install a custom rom the same way u have..... i was wondering if you or anyone else on the forum could give me step by step guide on how to go about installing the custom rom with the ability to revert back to my original stock OS wen i need to......
i had posted a thread here http://forum.xda-developers.com/showthread.php?t=2378162 and i got some good advise so far:
you or anyone here could reply with the instructions i need or at least send me a link to a tutorial .... as i said this is my first Android so i really dont want to make any mistakes while doing this..
THANX MUCH !!!!!!!
Click to expand...
Click to collapse
Hey, so this was my process.
First, I made sure that the stock software on the phone was up to date. I did this since that way if you have to go back to stock, you are on the latest version, and you can confirm that you are using the correct rooting application. The root tool I link to below will work on 5.7.906 which I believe is the latest.
Second, root your phone. You will need to go HERE to download the tool. Follow the instructions on the page, and it should go fine. The phone will reboot several times during the process, this is normal. Once the program says it is done, you can go check for the Superuser application in your app drawer (it might be SuperSU or something similar, I can't quite remember).
After you have root access on your phone download the safestrap application for Droid 3 HERE. Make sure you get the one that is specifically for Droid 3. Transfer that file (should be called Droid3Safestrap-3.05.apk) onto your phone.
There are a few ways to transfer files onto your phone. You will also need to do this later to transfer the .zip of whatever ROM you decide on). If you have a micro-sd card that you can put into your computer, that works. Or, you can have the phone on and plug it into the computer and transfer it that way. I believe you can transfer to either the micro SD or the internal memory. I prefer micro SD since you might want to wipe the internal memory to fix things or switch ROMs.
After the .apk is transferred find where you put it using a file manager (I personally use Root Explorer but I think Astro or stock will work), and install it. Go to the new app and run it and it should request root access, which you grant, and it should flash the recovery.
Once you have the recovery installed you can install whatever custom ROM you want, pretty easily. Safestrap is great because even if you screw up the ROM somehow, you can always just boot back into Stock.
Here is where you'll have to chose what custom ROM you want. Now as far as I know, the Droid 3 is fairly limited in its ROM selection. It does have a Cyanogen Mod 10 version, but it is not a stable version and in my experience, doesn't run super great. If you want to try Cyanogen Mod 10, I actually suggest you get the Avatar Rom variant HERE, but keep in mind that apparently you do need a SIM card inserted for the cell signal to work at all. Overall it did seem to run fairly choppy but they are still releasing newer nightly versions (July 20th was the last) so it might have gotten better. One thing to know about these ones is that the camera does not work at all, so if that matters to you just skip these.
Now those two (CM 10 and avatar) are ROMS that will bring the droid 3 up to Android 4.2 Jellybean. If you don't care about getting up to the latest version (Jellybean actually isn't the latest anymore but still pretty darn close), then there are a few other Gingerbread ROMS out there that work a bit better.
HERE is a list of a few other droid 3 ROMs, my favorite Gingerbread one that worked overall really well and stable was Steel Droid. Otherwise, you can just look around and see what's available or what other people are suggesting. Choose your ROM (or several, it's fairly easy to install them so try a few!), and download it. You should get a .zip that is approx. 150-170 MB in size. As an aside you will probably also want to download the corresponding GApps package HERE and put that on the SD card as well. I think some ROMs have that included, but if you boot into a room and it doesn't have the Play store installed, you need to go back into safestrap and install the GApps package over it. You don't have to delete and recreate the rom slot, just go back into install and install it over. When I say corresponding, the different packages go with different versions of Android so for example the one labelled 20110307 would go with Android 2.3.4 which is Gingerbread, the version that Steel Droid uses.
For whichever one you choose, the install process is mostly the same. Reboot your phone, and after the Motorola Logo comes up, you should see the Safestrap splash screen. To get into the recovery menu you have to hit the "Menu" soft-key (the one all the way on the left) within 10 seconds so keep an eye on it.
From the recovery menu go into "Boot Options" You should see 5 options, rom-slot 1-4 and Stock. When you want to switch what ROM you are booting you select on the corresponding slot, and hit activate, then you can reboot through the menu option and it will start that ROM.
To install you will go into "Boot Options" chose whichever rom slot you want (most likely #1). You will have to create that slot, which can take a few minutes. After the slot is created, back out of boot options, and go to "Install". Find the .zip of whichever ROM you chose, and select that to install, and then you can install the corresponding GApps package.
After the install is complete, you can reboot (make sure it says rom slot 1 is selected up to), and it should boot into the Setup process of the ROM. If you ever need to go back to stock, just reboot, go back into Safestrap > Boot options, activate the "Stock" one and boot into that.
A few notes, if you want to switch ROMs, or install multiple ROMs you can do that using the different rom slots with a few exceptions. The Cyanogen Mod 10 and the Avatar Rom (most Jelly bean ones I think) have to be installed in rom slot 1, so if you're doing those and another like Steel Droid, put the Jellybean one in rom slot 1 and the Gingerbread on in rom slot 2. Also if you want to install a different ROM, it's generally best to just completely erase the rom slot and recreate it, then install the different ROM in the newly created rom slot. You can always create backups with Safestrap and restore them with Safestrap. Oh and make sure your phone has a decent charge before doing a lot of the safestrap stuff (I would say at least 60%) you can also have the phone plugged in while doing this stuff, but I'm not always confident it is charging so try and get it charged up before hand.
Finally, if you ever mess up to the point where you're worried that you broke the phone, (boot loops or it is stuck on the Motorola Logo) you can download this restore tool HERE. This should completely wipe and restore the stock software on your phone. It will bring it back one version previous though, so be sure to go through the standard update process to bring it back to 5.7.906 so that the root tool will work. This tool has saved me a few times and is pretty easy to run.
Sorry, I know that is a lot of stuff and looks pretty scary. It really is just a few steps that you should research and make sure you are comfortable doing.
1: Get Root access on the stock software on the phone
2: Install safestrap and flash the custom recovery
3: Boot into recovery and install whichever custom ROM you want
If you have any questions feel free to ask!
Much appreciated !!! ..... i will try these steps as soon as i get my phone..... hope it doesnt make a difference if my D3 is an unlocked GSM phone because all service providers in my country uses GSM
Tha slayer said:
Much appreciated !!! ..... i will try these steps as soon as i get my phone..... hope it doesnt make a difference if my D3 is an unlocked GSM phone because all service providers in my country uses GSM
Click to expand...
Click to collapse
if you are using gms you may need Rom version with a modified build prop, most of the roms threads will have a modified version for GMS, in the OP or somewhere in the thread. if you can't find it just ask in the original rom thread
also some good how to videos here https://sites.google.com/site/tomsgt123/all-videos/videos-page-4
So its been awhile since I flashed a ROM to my BIONIC. That was back before ICS was even released for the BIONIC. So I started looking at updating to one of the more stable ROMS that has way better performance that this stock one. Currently I have 6.7.232 on my phone and I would like advice on which ROMs are best for this device. I have looked into some such as Gameblur, Raging Bionic, and Icarus HD. Thus far I havent really decided on one but I have noticed that some of them are on Jelly Bean. I am not sure if I have to return to the OTA path to update to any of these. I also have Safestrap 3.11 installed. Any advice would be appreciated. thanks.
Any help out there?? Thanks.
HarielA4 said:
I have looked into some such as Gameblur, Raging Bionic, and Icarus HD. Thus far I havent really decided on one but I have noticed that some of them are on Jelly Bean. I am not sure if I have to return to the OTA path to update to any of these. I also have Safestrap 3.11 installed. Any advice would be appreciated. thanks.
Click to expand...
Click to collapse
Well Gameblur and Raging Bionic both require one to be on the 98.72.22 Moto 4.1.2 Jellybean update. Incarus HD however is ICS base and can be flashed with your current setup.
If you are destine to update your stock side I would first prep what you currently have on there right now. See this HERE for getting stuff ready.
I would backup anything on the internal storage before hand and make sure that you have a full battery.
You will find the proper FXZ files HERE. If you are on 6.7.2-223 update then use the one for 4.0.4. It would be easier to root again through the update process. After you have completed the restore processes and root through the HOB. Make sure you have VooDoo Root Keeper installed on your phone to back up Root and to disable Root. Then with a good Data connection you are going to take the update Via OTA. Once the update is complete and you are fully booted up. Use VooDoo to restore your Root and test using root explore or NoFrills CPU.
nobe1976 said:
See this HERE for getting stuff ready.
Click to expand...
Click to collapse
The link provided there has a post from the OP that states House of Bionic is discontinued and to use House of Moto. Should I do that?
Secondly I havent for sure decided which Rom I will be moving to. I feel that the interface I have been using is kinda laggy. I installed Next launcher to see if that made a difference and it was more responsive but still my system memory usage skyrockets after a couple hours and sometimes the only way to resolve it is to restart the device. Any recommendations as to which Rom I should move to?
HarielA4 said:
The link provided there has a post from the OP that states House of Bionic is discontinued and to use House of Moto. Should I do that?
Click to expand...
Click to collapse
You can try using the House of Moto stuff also depending on what you feel more comfortable on using. The HOM was desighned to have one interface for all Moto devices instead of each having its own individual setup. I would still use HOB for your purpose only because I don't know if he added in the script to root the device, which was made for ICS versions not JB hence the discontinued portion of it.
HarielA4 said:
Secondly I havent for sure decided which Rom I will be moving to. I feel that the interface I have been using is kinda laggy. I installed Next launcher to see if that made a difference and it was more responsive but still my system memory usage skyrockets after a couple hours and sometimes the only way to resolve it is to restart the device. Any recommendations as to which Rom I should move to?
Click to expand...
Click to collapse
I have tested and played around with a lot of different ROMs and tweaks to find the one that I am ultimately satisfied with. Flying Jelly, well the name speaks for itself, Rage, and GameBlur (which I had minor help in) all work fine for there purpose.. One must pick and choose which one suits there purpose. So my suggestion would be to install SafeStrap 3.60, which is the latest updated one, and create a few slots and run each the same as you would Stock or any other firmware to measure which one suits your needs.....
In a previous post you wrote "If you are on 6.7.2-223 update then use the one for 4.0.4.". I went to the FXZ site and it shows that the 4.04 rom has version 6.7.223 on it already. I already have root. Why would I need to install the same version again and reinstall root to get on the OTA. I just want to make sure I understand this to avoid making mistakes. Thanks.
Then if you feel confedent that all will go well then just install Voodoo to backup and disable root. Take the OTA update and see if it will install. The most that will happen is that if it detects that something is missing from the current firmware you have the installation process will fail and reboot back into what you currently have. At that point you will have to FXZ your stock back to the way it was installed originally, root, then backup root and disable, then take the OTA. ICS is way easier to root then JB. I have kept Root before via OTA when I got it, so I know it Voodoo will keep the backup and install it..
nobe1976 said:
Then if you feel confedent that all will go well then just install Voodoo to backup and disable root. Take the OTA update and see if it will install. The most that will happen is that if it detects that something is missing from the current firmware you have the installation process will fail and reboot back into what you currently have. At that point you will have to FXZ your stock back to the way it was installed originally, root, then backup root and disable, then take the OTA. ICS is way easier to root then JB. I have kept Root before via OTA when I got it, so I know it Voodoo will keep the backup and install it..
Click to expand...
Click to collapse
I think I miscommunicated what my question was. The instructions say to install the FXZ for the 4.0.4 that has the same version of Android OS that is currently installed. the further instructions say to install the OTA from verizon but everytime I check for an update nothing shows up on my phone. Where else can I get the OTA?
In addition I want to know what I should do about safestrap. Should I remove it before installing the OTA or is it fine to leave as is when I go to install the OTA?
OK... If you cannot even get Big Red to send you the update. You can fxz the update, but at that point you will loose root, but have the option to keep your current data. Go see House of Moto or House of Bionic over at droidrazr.com
As far as Safestrap I would just uninstall recovery through the app the reboot so it clears out before the fxz process.
$3π+ £®m€ ×X× BiOπI¢ oπ $ø|/|£ťhïñğ ¢ű$ț¤|/|
fyi I think he took House of Bionic down, didn't see a link. I can however attest that House of Moto worked perfectly fine. Flashed fresh .232 and VZW sent me the OTA (I tried voodoo rootkeeper before updating). I did lose root despite following all of the steps. To get it back your best bet is to boot up a live Ubuntu disc. I tried the VM that someone compiled but it kept failing.
PS: nobe1976, how the hell did you fit 3 ROMS on your phone? I can only fit one ROM (besides obviously stock). Wish we could install ROMs through safestrap to SD (internal or external).
mikemikemikexxx said:
fyi I think he took House of Bionic down, didn't see a link. I can however attest that House of Moto worked perfectly fine. Flashed fresh .232 and VZW sent me the OTA (I tried voodoo rootkeeper before updating). I did lose root despite following all of the steps. To get it back your best bet is to boot up a live Ubuntu disc. I tried the VM that someone compiled but it kept failing.
PS: nobe1976, how the hell did you fit 3 ROMS on your phone? I can only fit one ROM (besides obviously stock). Wish we could install ROMs through safestrap to SD (internal or external).
Click to expand...
Click to collapse
This is the Exploit I have been using the past few days.. HERE.
However Samuri didn't remove the HOB site, He just doesn't maintain it as much since HOM. Here is the LINK to that f needed.