Hi everyone, I've faced a big problem for installing ROM based on nAa Kernel,
actually I'm using PrimeHD Stock Kernel Version since my wifi only works for stock kernel...
After I tried MiniCM9 based on nAa Kernel, I can switch on the wifi,
but it becomes very unstable and reconnect for many time....
I can't download Apps from Google Play and even I can't connect my Google account...:crying:
I believe my bootloader is unlocked because of the result received from s1tool
Is there any solution for this problem?
You flashed them in correct order ?
Kernel > Full Wipe > Flash Rom
Sent from my E15i using xda app-developers app
Mockingbird said:
You flashed them in correct order ?
Kernel > Full Wipe > Flash Rom
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
Yes I do, so I don't think the problem comes from that way
Reflash kernel
Backup
Reset
Flash ROM!
Its work for me for many times
Sent from my E15i using xda app-developers app
BlackRabbit1703 said:
Reflash kernel
Backup
Reset
Flash ROM!
Its work for me for many times
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
You mean that I have to reflash the nAa Kernel? Flash the Kernel for 2 times?
Cool_Gemini said:
You mean that I have to reflash the nAa Kernel? Flash the Kernel for 2 times?
Click to expand...
Click to collapse
if its still not working the answer is Yes
and the ROM too..
don't restore data from different kernel.
i.e
you had flashed kernel B but you're restoring from kernel A
it make error..
Clear cache,go to partition and click format cache. Full wipe and reflash rom!
Related
help me plz i was trying to install dark theme , the instruction said : clear cash , dalvik , flash the theme
i did that now i'm stuck at the boot animation tried to full wipe the phone and nothing help me plzz
i have paranoidandroid v0.5
Warnahly said:
help me plz i was trying to install dark theme , the instruction said : clear cash , dalvik , flash the theme
i did that now i'm stuck at the boot animation tried to full wipe the phone and nothing help me plzz
i have paranoidandroid v0.5
Click to expand...
Click to collapse
Have performed a full wipe in ICS? Try flashing a stock gb Firmware with odin and do a full wipe, then re root and flash the ROM.
Or if You still have CWM You can flash abyss kernel, reboot recovery and then re flash the ROM.
glevitan said:
Have performed a full wipe in ICS? Try flashing a <a class="inlineAdmedialink" href="#">stock</a> gb Firmware with odin and do a full wipe, then re root and flash the ROM.
Or if You still have CWM You can flash abyss kernel, reboot recovery and then re flash the ROM.
Click to expand...
Click to collapse
+1
Thanks
and btw another thing my note gets really hot
what should i do ??
Warnahly said:
+1
Thanks
and btw another thing my note gets really hot
what should i do ??
Click to expand...
Click to collapse
Undervolt it using Tegra Overclock or any other utility...
I strongly recommend to check the instructions before u do the same as it can have bad impact on your device as well..
From where i can get download abyss kernel for gnote ics rom.... Can i use it with cm9
Sent from my GT-N7000 using xda app-developers app
parryjassal said:
From where i can get download abyss kernel for gnote ics rom.... Can i use it with cm9
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1362424
Sent from my GT-N7000 using XDA Premium App
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
parryjassal said:
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
abyss kernel is GB, for u to stay safe during the wipe. The usual procedure is to flash abyss from CWM, reboot recovery (not the device), do a full wipe and then immdiately flash a custom rom.
CM9 has a safe kernel as is compiled from source and not from Samsung kernel release as some other custom roms do....just read the dev's threads. Take into consideration that not all custom kernel works with custom roms. Make sure that u choose matching pairs!...:good:
You can safely format data in cwm on cm9 kernel. However I suggest that you should reflash PA 0.5
parryjassal said:
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Suitable answer? Lol i think u dunn knw exactly wht u r searching for....
Sent from my GT-N7000 using XDA Premium App
hi.
i download xperia ics v1 and its good but have some bug
in v2 publisher fix that bug but when i install the rom
it dose not boot.
and freez at xperia logo.
why????
and it does not have Ultra Brightness.
how can i add it into the rom??
Are you sure you installed it right?
Full wipe?
Right kernel?
xx15 baseband?
Sent from my X8 using xda premium
If you didnt full wipe then you will have the boot stuck problem..
(Assuming that you did all the other steps correctly)
ans
stamatis16 said:
Are you sure you installed it right?
Full wipe?
Right kernel?
xx15 baseband?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
before i installed V1 of this rom .
and in V2 i install it same.
wipe /cache
wipe /data
wipe /sd-ext
wipe /system
wipe/ dalvik-cache
and kernel nAa ICS 4
and when i unlock the bootloader and .... it means baseband 15.
but it stop is XPERIA logo
Unlocking bootloader doesn't necessary mean xx15 baseband.
Have you fix your bootloop now?are you on stock?
Go to "about phone" and see what it tells. If it isn't 15 upgrade it with pccompanion
Have you ever flashed any custom rom before?
Sent from my X8 using xda premium
I install v1 and all goog!!! but I install v2, freeze and reboot in Setup Wizard
Wipe Data
Wipe Dalvik cache
Format /system
kernel nAa - ics -04
monsluid said:
I install v1 and all goog!!! but I install v2, freeze and reboot in Setup Wizard
Wipe Data
Wipe Dalvik cache
Format /system
kernel nAa - ics -04
Click to expand...
Click to collapse
You mean when you set up your email?,maybe there is a problem with the rom,try another
Sent from my X8 using xda premium
yes its baseband 15 and this is not my first custom rom.
my kernel is naa ics and not stock.
i do all wipe.
i have no problem whit other rom and v1 of this rom
but it occur just in v2
stamatis16 said:
You mean when you set up your email?,maybe there is a problem with the rom,try another
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Yes, I'm using ICZaraky and all is good!!! I Think the problem is in the Rom
Sent from my E15i using xda app-developers app
I suggest you guys that first you flash gingerbread and after a little experience of it, go to ICS...
Ok guys,If you are sure that you are doing the installation right then there may be a problem with the rom,wait for an update and meanwhile try another rom
Sent from my X8 using xda premium
suggest
version 1 was stable, not sure wtz wrong with Version 2, is there any way to resolve head set plug in detect issue in Version 1 ??
I have stock ICS 4.0.4 rom and I want to root
my Note and flash to Cyanogen ROM or paranoid rom.
1 question: Will I be able to flash using Philz Cwm6 Kernel, or should I use other Kernel?
2. Does a stock ICS rom is a peoblem flashing to Jelly Bean Cyanogen or is the kernel which is important for flashing?
P.S Sorry if I wrote something because I'm still noob on phone modding.
Sent from my GT-N7000 using xda app-developers app
just go to install a safe kernal here for ur ICS4.0.4 http://forum.xda-developers.com/showthread.php?t=1901191
my advise is do a backup using the safe kernal b4 flashing any roms it might help u in case something when wrong.
if u really don't know how to flash CM u can go find a rom manager it might be the easiest way for noob.
Flashing cm requires first flashing a cm 10 or 10.1 kernel, have a look in chasmodo's kernel repository in the stickies somewhere for cm based kernels.
Doesn't matter what rom you're on, you're right it's the kernel that's the important part.
Also if flashing cm base, make sure you perform full wipes before and after flash for best stability.
Sent from my GT-N7000 using xda premium
Thanks for imformation
That really helped
Sent from my GT-N7000 using xda app-developers app
ReiZona said:
Thanks for imformation
That really helped
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Use the thanks button.
Sent from my GT-N7000 using xda premium
If I flash Hydracore Kernel then will i be able to flash CM?
ReiZona said:
If I flash Hydracore Kernel then will i be able to flash CM?
Click to expand...
Click to collapse
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I just don't understand one thing. Now I'm sitting on Philz 3.99 safe Kernel and stock ICS 4.0.4 rom . If I flash CM9 Kernel from chasmodo Kernel repository then should I flash to CM ?
SpyderTracks said:
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
ReiZona said:
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
Click to expand...
Click to collapse
You won't be able to boot into ics, but once you've flashed cm kernel, then reboot into recovery and flash CM rom and then gapps, then do 3 wipes before boot.
Sent from my GT-N7000 using xda premium
ReiZona said:
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
Click to expand...
Click to collapse
Philz has fixed th error 7 on the 3.99 release. So you can go ahead and do the formats and flash the cm rom. There is actually no need to flash the th cm kernel first.
I have done it myself a couple of days ago
Hi guys. Today I tried upgrading GingerDX from v030 to v031b but I mistakenly downloaded (and flashed) Alfs/nAa instead of Stock kernel.
Now the phone screen won't pass the Sony Ericsson boot scree... I can't find the key combinations to enter into CWM recovery menu. Is there any other way I can flash the proper ROM using Flashtool? I found this guide but I don't want to go back to the stock kernel (if possible).
Thank you!
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Gogeta said:
You mean to. Say stock rom??
You are already on stock kernel...
& no other option you must follow that guide if you can't unlock bootloader!
see boot animation without rebooting
Click to expand...
Click to collapse
Right, I already have the stock kernel, but I flashed Alfs/nAa ROM instead of the Stock one (from the download options) and now the phone won't pass the bootloader... Will try that guide since I can't enter CWM recovery using the key combinations I found
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
stamatis said:
See the second post of the following thread
http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
He already stated that link in OP
see boot animation without rebooting
Gogeta said:
He already stated that link in OP
see boot animation without rebooting
Click to expand...
Click to collapse
Oops,my mistake, I didn't notice there were a link.
Ok, looks like there's no other way than going back to stock :crying:
Thanks anyway guys!
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Mistev said:
Re-flash back to stock 2.1, root, recovery and ROM again.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Yes,its not harder isn't it? really easy and fast way. you do this couple of times and you automatically capture the method easily
i unbricked my soft brick X8,root and install Xrec without guide for 4 times.that nice
sorry for my baddest english.
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
vazquezjm said:
I re-installed 2.1 e15a stock kernel, then xRecovery and tried with 31b and 30 to no avail (SE -> GingerDX logo loop).
I can't figure out what I'm doing wrong...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Gogeta said:
1. Use CWM to flash GDX!
2. Wipe dalvik cache that you forgot..
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
Where can I downloadCWM? I couldn't find it and that's why I used xrecovery
Sent from my Galaxy Nexus using xda app-developers app
Will xtoolbox do the job?
It I'll be great if everything comes from one place instead of having to root using guide A, install CWM from guide B to end up using XDA's guide to install GDX. Just un idea, specially for noobs
Sent from my Galaxy Nexus using xda app-developers app
X8 toolbox gives almost everything
Sent from my E15i using xda app-developers app
Well, when I softbricked my X8, I never used my PC to unbrick it. I will just go into the recovery and flash a working rom. Problem solved..
But I can't figure out why he is sayig he can't go into the recovery. The button patterns remains the same no matter what rom you are on or what kernel you use. But I can be wrong.
Anyway did you do all these steps:
# Wipe Full System
# Wipe Cache, Dalvik-Cache
These steps are very important. But we often forget them.
Dude.....
Sometimes can't get into recovery while on stock kernel
Happened 3 times to me
Sent from my X8 using xda app-developers app
Maybe the op is downloading gdx for custom kernel...
dagger said:
Maybe the op is downloading gdx for custom kernel...
Click to expand...
Click to collapse
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
We dont see the sony ericsson logo on custom kernels..
it is seen only on stock kernel.
so there is a high possibility that op downloaded the wrong rom..
Gogeta said:
If he downloaded for custom kernel ...
he can't see the GDX logo
only 'Sony Ericsson'
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
if you use rom for stock kernel you can see the GDX logo...that is part of boot animation. alfs shows WLAN version not GDX. the Sony Ericsson logo is of stock kernel. so if you flash a rom for custom kernel you will still see that logo
it is possible (as dagger said) that OP downloaded rom for custom kernel.
Hi, i have a xperia x8 (10w52) with unlocked bootloader and I think I have a problem after the bootloader unlocked. So what's the problem?
My xperia won't boot into custom rom after I install the rom. I didn't get any problem about install custom rom when my bootloader is still locked. But, after I unlock the bootloader...... Another story with locked bootloader. Won't boot, stuck in sony ericsson logo (stock kernel) & nAa/oxydo (custom kernel). I follow the instruction in each cusrom thread. But it same.
Any idea?
Thx.
nb : everything's fine when it runs on stock rom and stock kernel.
Sent from Rezound using LEUNGEUN URANG.
From where/which thread did u follow to unlock your Bootloader?
Sent from my GT-I9100 using xda premium
Titan9119 said:
From where/which thread did u follow to unlock your Bootloader?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ah. unfortunately, i'm forget. But, it works fine on other x8.
Sent from Rezound using LEUNGEUN URANG.
Hmm?Did u full wipe data/cache? Does the rom supports custom kernel?
Sent from my GT-I9100 using xda premium
are you sure your bl is unlocked? because if you flashed a different kernel, se logo shouldn't appear anymore.
also, what rom+kernel combination are you trying to flash? if it's jb, you need to format system, cache and data, flash kernel, and reformat again. only after should you flash the rom.
Just because i don't doesn't mean i can't.
Titan9119 said:
Hmm?Did u full wipe data/cache? Does the rom supports custom kernel?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yap, I followed all the instruction, I tried to relock the bootloader, but it was same thing. Stuck in sony ericsson logo after I flashed the cusrom.
Sent from Rezound using LEUNGEUN URANG.
syahrisyadr said:
Yap, I followed all the instruction, I tried to relock the bootloader, but it was same thing. Stuck in sony ericsson logo after I flashed the cusrom.
Sent from Rezound using LEUNGEUN URANG.
Click to expand...
Click to collapse
What is the rom+kernel that you're flashing?
Sent from my GT-I9100 using xda premium
cascabel said:
are you sure your bl is unlocked? because if you flashed a different kernel, se logo shouldn't appear anymore.
also, what rom+kernel combination are you trying to flash? if it's jb, you need to format system, cache and data, flash kernel, and reformat again. only after should you flash the rom.
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Veryyyy sureee. I checked it with s1tool.. It was same thing when I install the custom rom. Stuck in boot. (happened in stock and custom kernel)
Like what I said, I followed all the instructions.
This is the rom & kernel that I tried but it's bootlooping.
NAa + MiniCM10
NAa + Jellyblur (nAa full support version)
NAa + JBMP
Stock Kernel + ZenceFii v14 stock
I will try to install GingerDX v30 (my old custom rom on my x8 when the bootloader still locked) with stock kernel. I will let you know what happen next
Sent from Rezound using LEUNGEUN URANG.
syahrisyadr said:
Veryyyy sureee. I checked it with s1tool.. It was same thing when I install the custom rom. Stuck in boot. (happened in stock and custom kernel)
This is the rom & kernel that I tried but it's bootlooping.
NAa + MiniCM10
NAa + Jellyblur (nAa full support version)
NAa + JBMP
Stock Kernel + ZenceFii v14 stock
I will try to install GingerDX v30 (my old custom rom on my x8 when the bootloader still locked) with stock kernel. I will let you know what happen next
Sent from Rezound using LEUNGEUN URANG.
Click to expand...
Click to collapse
no idea about zencefii but...
for jb roms, what i do is format /system /cache /data via cwm (either on stock or gb kernel), flash naa's jb kernel, then format those partitions again. then i flash minicm10. i haven't experienced bootloops by doing that. good luck in flashing gdx though. :thumbup:
Just because i don't doesn't mean i can't.
Did u flash the nAa-jb-05 or the nAa-14?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Did u flash the nAa-jb-05 or the nAa-14?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
NAa jb 05 buddy
Sent from Rezound using LEUNGEUN URANG.
cascabel said:
no idea about zencefii but...
for jb roms, what i do is format /system /cache /data via cwm (either on stock or gb kernel), flash naa's jb kernel, then format those partitions again. then i flash minicm10. i haven't experienced bootloops by doing that. good luck in flashing gdx though. :thumbup:
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Thanks! But bad luck with gdx If you know what I mean. Yeah, i follow the instruction as you said. But..... Em it same. Any idea?
Sent from Rezound using LEUNGEUN URANG.
syahrisyadr said:
Thanks! But bad luck with gdx If you know what I mean. Yeah, i follow the instruction as you said. But..... Em it same. Any idea?
Sent from Rezound using LEUNGEUN URANG.
Click to expand...
Click to collapse
no idea right now. you did say gdx 30 worked when you bl was locked. i don't really know why it doesn't work now if you're using stock kernel.
i'll post again when i think of something.
Just because i don't doesn't mean i can't.
cascabel said:
no idea right now. you did say gdx 30 worked when you bl was locked. i don't really know why it doesn't work now if you're using stock kernel.
i'll post again when i think of something.
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Yes, it worked when the bl is locked. Ahhh. What I've done. But, it's better than hard bricked. Now my phone is in stock rom. Thx, buddy. Hehe
Sent from Rezound using LEUNGEUN URANG.