Kindly advice... can't flash any ZIP from CWM - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Folks,
I have one issue with one SGN which i couldn't solve, and, would like to seek help from all the good fellas out there
Basically in one liner... i can not flash any file from CWM after upgrading to ICS - as of now. It will always kind of 'hang' when I/O performs write. I/O read is OK.
What i have done so far ;
-- Reverting back to Stock Gingerbread --
a1.) PC ODIN back to Gingerbread w/ PIT. Re-root and CWM.
Gingerbread boots all good.
a2.) Reboot to CWM and perform wipe.
Gingerbread boots all good and back to "Default'.
a3.) Enable "USB Debugging" and proceed to root and installation of CWM.
Gingerbread boots all good, with verified Root and CWM.
Flashing any ZIP from CWM from either internal or external SDcard has no issue.
-- Upgrade to ICS --
b1.) Reboot to CWM, flash Abyss safe kernel, wipe and format all mounts.
b2.) Reboot again to CWM, flash custom ICS ROM, JBroid, and kernel.
ICS boots all good, with verified Root and CWM.
-- Flash a ZIP via CWM --
c1.) Reboot to CWM
c2.) Flash any ZIP from either internal or external SDcard.
It will read the ZIP successfully, but, when I/O starts to write, the operation will just "hang".
Thinking it could be a lost root access issue, i boot back to ICS to check the root access, which unfortunely has no problem.
I have also tried "Set Permissions" from CWM, but to no avail.
Lastly, I have replicated the exact same process mentioned as above to another SGN, but the latter does not pose such issue

j.wong said:
Folks,
I have one issue with one SGN which i couldn't solve, and, would like to seek help from all the good fellas out there
Basically in one liner... i can not flash any file from CWM after upgrading to ICS - as of now. It will always kind of 'hang' when I/O performs write. I/O read is OK.
What i have done so far ;
-- Reverting back to Stock Gingerbread --
a1.) PC ODIN back to Gingerbread w/ PIT. Re-root and CWM.
Gingerbread boots all good.
a2.) Reboot to CWM and perform wipe.
Gingerbread boots all good and back to "Default'.
a3.) Enable "USB Debugging" and proceed to root and installation of CWM.
Gingerbread boots all good, with verified Root and CWM.
Flashing any ZIP from CWM from either internal or external SDcard has no issue.
-- Upgrade to ICS --
b1.) Reboot to CWM, flash Abyss safe kernel, wipe and format all mounts.
b2.) Reboot again to CWM, flash custom ICS ROM, JBroid, and kernel.
ICS boots all good, with verified Root and CWM.
-- Flash a ZIP via CWM --
c1.) Reboot to CWM
c2.) Flash any ZIP from either internal or external SDcard.
It will read the ZIP successfully, but, when I/O starts to write, the operation will just "hang".
Thinking it could be a lost root access issue, i boot back to ICS to check the root access, which unfortunely has no problem.
I have also tried "Set Permissions" from CWM, but to no avail.
Lastly, I have replicated the exact same process mentioned as above to another SGN, but the latter does not pose such issue
Click to expand...
Click to collapse
Are you trying to flash cf root, because it cannot be flash in CWM recovery. I cannot flash cf root myself in recovery.

Make sure you have checked unknown sources under Settings--> Security..
When you flash a custom ICS rom don t flash jbroid after flashing the rom. Reboot Recovery and try to install applications .
Sent from my GT-N7000 using XDA Premium App

j.wong said:
Folks,
I have one issue with one SGN which i couldn't solve, and, would like to seek help from all the good fellas out there
Basically in one liner... i can not flash any file from CWM after upgrading to ICS - as of now. It will always kind of 'hang' when I/O performs write. I/O read is OK.
What i have done so far ;
-- Reverting back to Stock Gingerbread --
a1.) PC ODIN back to Gingerbread w/ PIT. Re-root and CWM.
Gingerbread boots all good.
a2.) Reboot to CWM and perform wipe.
Gingerbread boots all good and back to "Default'.
a3.) Enable "USB Debugging" and proceed to root and installation of CWM.
Gingerbread boots all good, with verified Root and CWM.
Flashing any ZIP from CWM from either internal or external SDcard has no issue.
-- Upgrade to ICS --
b1.) Reboot to CWM, flash Abyss safe kernel, wipe and format all mounts.
b2.) Reboot again to CWM, flash custom ICS ROM, JBroid, and kernel.
ICS boots all good, with verified Root and CWM.
-- Flash a ZIP via CWM --
c1.) Reboot to CWM
c2.) Flash any ZIP from either internal or external SDcard.
It will read the ZIP successfully, but, when I/O starts to write, the operation will just "hang".
Thinking it could be a lost root access issue, i boot back to ICS to check the root access, which unfortunely has no problem.
I have also tried "Set Permissions" from CWM, but to no avail.
Lastly, I have replicated the exact same process mentioned as above to another SGN, but the latter does not pose such issue
Click to expand...
Click to collapse
Please make sure you have full root before flash anything at recovery. For your cases, should be involve in partial root issue.
Please report back, and we will guide you how to gain full root again.
Please using "root explorer" copy and paste some file into system.
Sent from my GT-N7000 using xda premium

cant flash from CWM
i think your prob is mainly because of the partial root like what lee mentioned. i personally experience that before..the only solution for u is to flash the stock ICS <pls download fr dr.ketan's post> thru ODIN PC. After u flashed the stock ICS, root it and u r free to flash any ICS rom u like..cheers..
if this guide is useful..a Thank ll nt cost u a buck..:good:

Doesn't flashing a custom kernel through PC odin give you full root? In that way he can flash a custom kernel to resolve the problem.
Sent from my Android Rocket using xda Premium

Akilesh said:
Doesn't flashing a custom kernel through PC odin give you full root? In that way he can flash a custom kernel to resolve the problem.
Sent from my Android Rocket using xda Premium
Click to expand...
Click to collapse
For partial root problem, flash rooted kernel thru pc odin wont able to 100% solve the problem, but cant give it a try.
Sent from my GT-N7000 using xda premium

lee yun khong said:
For partial root problem, flash rooted kernel thru pc odin wont able to 100% solve the problem, but cant give it a try.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
It'll also raise your counter.
Sent from my GT-N7000 using xda premium

But kernels with rooting ability gives us full root. I rectified a similar problem when i was running Ginger bread. Used Speed-Mod k2-12 to get full root.

Akilesh said:
But kernels with rooting ability gives us full root. I rectified a similar problem when i was running Ginger bread. Used Speed-Mod k2-12 to get full root.
Click to expand...
Click to collapse
Flash AbyssNotekernel42CWTouchOriginalLogo ( attached file ) using pc odin (pda slot ) . Its a .tar file so you can flash it using pc odin . You will get a functional clockworkmodrecovery after this step allowing you to flash any rom .
Caution it will raise your flash counter and you will get yellow triangle

To remove yellow triangle and and reset flash counter to 0 follow these steps
1. Flash AbyssNotekernel42CWTouchOriginalLogo using Odin 1.85 since the kernel is a .tar file .
2. Do full wipe and install RocketRom ICS with the ClockWorkMod Recovery( or other LPY ICS roms).
3. After successful boot , flash DAFUQ_N7000_05272012 Kernel( triangle away works on this kernel ) , which is again a .tar file , so flash it with Odin 1.85.
4. Check if the supersu app is installed , if not download from play store.
5. Install triangleaway.apk .
6. Reset the count
7. If the Samsung logo Screen is not visible then flash param.tar , with pda slot in Odin 1.85.
Hit thanks if i was any help to you

It might be worth running emmc check from play store also, make sure you haven't damaged a section of the chip
Sent from my GT-N7000 using xda premium

Folks... thanks for all your valuable inputs!
I have retry what i have mentioned, but this time round, i did a change of the ROM and Kernel to Criskelo and SpeedMod, and somehow the issue dissapeared
Still pretty much unsure what's the root cause, but, i believed like what you guys have mentioned - partial root

j.wong said:
Folks... thanks for all your valuable inputs!
I have retry what i have mentioned, but this time round, i did a change of the ROM and Kernel to Criskelo and SpeedMod, and somehow the issue dissapeared
Still pretty much unsure what's the root cause, but, i believed like what you guys have mentioned - partial root
Click to expand...
Click to collapse
Download busybox from playstore to get full root.. Just update binaries and stick to the instructions.
Sent from my GT-N7000 using XDA Premium App

@Archangel919
New Triangle away(v1.70) works on stock ICS ROM too
PS. Cf have said not to distribute apk, so just to respect developer post only link to his thread.(which also have newer apk).

Related

[REF][GUIDE]Another Way to Successfully Flash AOSP/AOKP/CM9 ICS Roms from Gingerbread

Until now we all had to use LP1 Repack as a stepping-stone between Gingerbread and custom ICS Roms.
However, thanks to thechints, we have found an easier way to get to a fully rooted AOSP/AOKP/CM ICS from Gingerbread.
The following procedure was tested by thechints, vviz, abhisahara, and moi, and it works.
It was tested on Stunner and CM9, but could work for any ICS Rom that currently has "flash LP1 Repack" as one of the steps in its flashing instructions.
I emphasize the word 'could'. Give it a try and tell us what happened. The suggested method is safe insofar as it won't brick your device. You have a safe way back to GB via nAndroid backup or PC Odin if it fails.
The only tool that you need for the following procedure to work is AbyssNote 4.2 Kernel --> props to angelom and Chris X.
Get AbyssNote 4.2 kernel HERE.
Do not use earlier AbyssNote Kernel versions for the following procedure.
So, how to do it?
When on any rooted GB Rom:
First and foremost
Double- and triple-check if you have proper GB root!
Do not put faith in the fact that your Titanium Backup or some other root app works.
Do not use various root checkers from the Market.
Do that by trying to paste a file in /system folder -that's the only way for you to really know.
If you can do the pasting, you have root. If not, this thread is not for you.
I got several PMs from users who managed to achieve soft-bricks while still on GB. They tried to
flash AbyssNote kernel and got stuck. Do not let that happen to you.
After that:
1. download AbyssNote 4.2 kernel and place it on your internal/external SD Card
Also download the ICS Rom you want to install and put it on your SD card.
2. reboot to CWMR (press and hold volume up + home + power button) and do a backup of your current system
3. after your backup is done, stay in Recovery
4. go to install a zip from SD card --> select AbyssNote 4.2 zip and flash it
5. go back to CWMR's root menu --> advanced --> reboot recovery
6. you'll find yourself in AbyssNote's Touch Recovery (select options by tapping them, not by using the volume rocker and home button)
7. factory reset --> wipe cache --> wipe dalvik
9. flash the ICS Rom of your choice
10. reboot and let the Rom settle for a couple of minutes
Now comes the important part...check if you have root.
Start any Explorer with root permissions (Root Explorer, Es Explorer, X Explorer etc.).
Copy any file (a picture, txt file, MP3, whatever).
Navigate to /system folder
Change the /system folder's permissions to R/W.
Paste the file you have copied into /system.
If the pasting goes through OK, you're fully rooted.
Delete the file you've just pasted and set /system as R/O again
And that's it. Enjoy your rooted ICS Rom.
Once again, massive thanks to thechints, abhisahara, vviz and ubiquitous Dr. Ketan.
What to do if this procedure doesn't work, i.e. you don't get full ICS root
As we all know, our Notes are quirky devices. What works for most doesn't necessarily have to
work for your phone. So, if you fail to get full root:
Option 1. You will still have 90% functional ICS on your Note. Your phone will do all the usual stuff
normally. You'll probably even be able to use root apps, like Titanium. However, bear in mind that
you are stuck in the Rom you have just flashed - there is no going anywhere because your CWMR
doesn't have proper root privileges to flash things - DO NOT USE CWMR.
What you won't be able to do on your Note is
- apply themes and mods (because that involves flashing stuff through CWMR with no proper root)
- change DPI settings on your Note (you won't be able to switch to tablet mode, for instance)
Everything else should work properly. If you can live with that for a couple of weeks until the
official ICS arrives, then fine. Relax and enjoy your Rom.
Option 2. If you can't stand the thought that you don't have full root permissions then
- you can try to reboot to CWMR, flash AbyssNote 4.2 again, and try to run a GB restore.
This doesn't have high chances of success, but all is not lost even if it fails. Then
- you can use PC Odin to flash pre-rooted KJ1 stock Rom as explained by Dr. Ketan.
dr.ketan said:
When No Any other method works to Root your device, use this[/B]
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: https://rapidshare.com/files/369028110/SGN_XX_OXA_KJ1_FACTORYFS.zip
(special thanx to schiwa for providing premium a/c to host file)
Code:
Mirror for Above file (in case above link not works then only)
Download this three files
[url]http://www.mediafire.com/?7vf637co8frdqqg[/url]
[url]http://www.mediafire.com/?kkvdsf5vh8zipzi[/url]
[url]http://www.mediafire.com/?l6qqicvibzhxt18[/url]
- Tool to join them, run the following file and locate the .001 file.
[url]http://www.mediafire.com/?btrusgmd1v2d72q[/url]
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol Down + Home + Power)
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now that you have a rooted GB stock Rom, Install Mobile Odin Pro n update your device to any new Rom with Mobile Odin
Click to expand...
Click to collapse
After that you can flash whatever you like from its CWMR or use Mobile Odin to upgrade.
Nice mate!
Very useful thread, hats off to you
matius44 said:
Nice mate!
Very useful thread, hats off to you
Click to expand...
Click to collapse
This will probably become obsolete in a matter of minutes thanks to neo's kernel.
and 5 stars rated
chasmodo said:
This will probably become obsolete in a matter of minutes thanks to neo's kernel.
Click to expand...
Click to collapse
What does it have to do with Neo's new kernel?
So we don't need to flash cf repack through mobile Odin or PC odin anymore and just flash 1st Abyte kernel, then 2nd flash any rooted & custom ics roms? Is it correct? What is your recommended ics custom rom would u suggest?
Sent from my GT-N7000 using xda premium
matius44 said:
What does it have to do with Neo's new kernel?
Click to expand...
Click to collapse
If Neo's kernel root sticks properly, one should be able to flash an ICS Rom straight from GB, just like you would flash a GB rom from another GB rom. No need for Abyss, Repack etc.
veasna.kelly said:
So we don't need to flash cf repack through mobile Odin or PC odin anymore and just flash 1st Abyte kernel, then 2nd flash any rooted & custom ics roms? Is it correct? What is your recommended ics custom rom would u suggest?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes that is correct! Just make sure you have root and AbyssNote version 4.2
Try ICS Stunner and you won't be disappointed
veasna.kelly said:
So we don't need to flash cf repack through mobile Odin or PC odin anymore and just flash 1st Abyte kernel, then 2nd flash any rooted & custom ics roms? Is it correct?
Click to expand...
Click to collapse
That is correct, yes.
chasmodo said:
That is correct, yes.
Click to expand...
Click to collapse
Meaning any custom & rooted ics rom will not cause any bootloop..etc when do this directly with CF Repack. I have heard some users mentioning in other threads that bootloop will be there is no CF repack LP1 before flashing any ICS roms.......
Sent from my GT-N7000 using xda premium
veasna.kelly said:
Meaning any custom & rooted ics rom will not cause any bootloop..etc when do this directly with CF Repack. I have heard some users mentioning in other threads that bootloop will be there is no CF repack LP1 before flashing any ICS roms.......
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No bootloops with this procedure.
chasmodo said:
If Neo's kernel root sticks properly, one should be able to flash an ICS Rom straight from GB, just like you would flash a GB rom from another GB rom. No need for Abyss, Repack etc.
Click to expand...
Click to collapse
Might be true but I honestly doubt that, as the key factor here is the recovery which I don't think Neo would use, I think he will use CWM Recovery but we shall see..
Either ways, amazing job here, credit is due where it's deserved
matius44 said:
Either ways, amazing job here, credit is due where it's deserved
Click to expand...
Click to collapse
Fq, out of thanks for today.
chasmodo said:
Fq, out of thanks for today.
Click to expand...
Click to collapse
No worries pal
Sticky​
As requested, sticky. Two in one day, good job guys! Added to wiki also​
Good one Chas
And here we come again
And people just stick to the stickies and you will be golden
This method works and has been tried and tested by others and me....so take a chill and go ahead with it
It worked for me!!
Now trying to find a way to mod the density of my ICS rom to 240, have not found anything working as of yet =/
julian071 said:
It worked for me!!
Now trying to find a way to mod the density of my ICS rom to 240, have not found anything working as of yet =/
Click to expand...
Click to collapse
Just edit build.prop file in /system manually and you're good to go
julian071 said:
It worked for me!!
Now trying to find a way to mod the density of my ICS rom to 240, have not found anything working as of yet =/
Click to expand...
Click to collapse
You can also download Rom Toolbox from the market and do it from there.
thanks chasmodo for this shortcut
just one question
if I've followed this way and got FULLY ROOTED ics rom
am i going to lose root if i format system partition or not ?

(help) gb rooted + cwm to flash custom ics roms

hey guys i just want some help because am planin to flash ics roms so i need a stock gb rooted + cwm ? download link ?
my quss
1- can i flash that rooted gb with cwm on odin pc without gettin the yallow triangle if there's not rooted gb with cwm then please provide me a link of gb rooted so i can use mobile odin to flash Abyss kernel 4.2
2- when i decide to go back from ics rom i should flash Abyss kernel in recover then reboot recovery then how can i flash the stock gb rooted in recovery or should i have a custom gb rom for it to be zip so i can flash it in recovery or should i just flash rooted stock gb with odin pc directly from ics rom ?
i know that i can do wiping things and factory data on ics and pleaes correct me if i said anything that would brick my phone thaank you so much you all for any help
am just worried i don't wanna brick my lovely Note
dannycanrock said:
hey guys i just want some help because am planin to flash ics roms so i need a stock gb rooted + cwm ? download link ?
my quss
1- can i flash that rooted gb with cwm on odin pc without gettin the yallow triangle if there's not rooted gb with cwm then please provide me a link of gb rooted so i can use mobile odin to flash Abyss kernel 4.2
2- when i decide to go back from ics rom i should flash Abyss kernel in recover then reboot recovery then how can i flash the stock gb rooted in recovery or should i have a custom gb rom for it to be zip so i can flash it in recovery or should i just flash rooted stock gb with odin pc directly from ics rom ?
i know that i can do wiping things and factory data on ics and pleaes correct me if i said anything that would brick my phone thaank you so much you all for any help
am just worried i don't wanna brick my lovely Note
Click to expand...
Click to collapse
Wht i understand is you want to flash a custom ICS rom on your note.
First of all..
Get root.
http://forum.xda-developers.com/showthread.php?t=1329360
Stick with the instructions.
After doing this you will have root+cwm installed on your lovely note.
Now download Abyss 4.2 from here.
http://forum.xda-developers.com/showthread.php?t=1362424
Now download custom ics rom from android development section and put it in your phone sd card or external card.
Reboot into recovery.
Flash abyss 4.2
Go to advanced and reboot recovery.
Now you have abyss redpill recovery or touch cwm.
Do all 3 wipes. Cache, Dalvik and data.
Flash rom
Reboot system
Sent from my GT-N7000 using XDA Premium App
Criskelo ICS v9 trouble
Hi,
I installed criskelo v9 on my phone just now..and titanium backup doesnt work..it says i do not have root permissions
now all my apps are on it and the phone is pretty pointless without it..
I tried installing abyssnote and franco kernel just to see if it works but the update gets stuck at "installing packages" and then reboots to system to the earlier settings..
the cwm i have right now is also not the touch version and my kernel is cf-root so i do not know if i should be reflashing criskelo directly on this to check for any difference..
PLease tell me what i need to do..I am lost and could not find anything after an hour of googling
shubhm_22 said:
Hi,
I installed criskelo v9 on my phone just now..and titanium backup doesnt work..it says i do not have root permissions
now all my apps are on it and the phone is pretty pointless without it..
I tried installing abyssnote and franco kernel just to see if it works but the update gets stuck at "installing packages" and then reboots to system to the earlier settings..
the cwm i have right now is also not the touch version and my kernel is cf-root so i do not know if i should be reflashing criskelo directly on this to check for any difference..
PLease tell me what i need to do..I am lost and could not find anything after an hour of googling
Click to expand...
Click to collapse
You need to get root first.. Follow this.
http://forum.xda-developers.com/showthread.php?t=1329360
Then check root permissions with root explorer. Don't try to flash kernels and wipes without the instructions as this will brick your device. Just stay calm and post here. I ll try to help ya as i could.
Sent from my GT-N7000 using XDA Premium App
Still not working!!
sahilarora2003 said:
You need to get root first.. Follow this.
http://forum.xda-developers.com/showthread.php?t=1329360
Then check root permissions with root explorer. Don't try to flash kernels and wipes without the instructions as this will brick your device. Just stay calm and post here. I ll try to help ya as i could.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I followed the instructions to the T.. Root permissions didnt happen..Here's what i did..
1. Downloaded CWM and busybox and placed them where he said
2. Booted into recovery and installed CWM
After this the UI didnt change to the touch UI as he indicated but was still the button UI
3. ANyway went ahead and installed busybox from the zip
Here the progress was stuck at "unmounting system" till the phone reboot itself to the system..And i still dont have root permissions as per titanium..
Where did i go wrong?
shubhm_22 said:
I followed the instructions to the T.. Root permissions didnt happen..Here's what i did..
1. Downloaded CWM and busybox and placed them where he said
2. Booted into recovery and installed CWM
After this the UI didnt change to the touch UI as he indicated but was still the button UI
3. ANyway went ahead and installed busybox from the zip
Here the progress was stuck at "unmounting system" till the phone reboot itself to the system..And i still dont have root permissions as per titanium..
Where did i go wrong?
Click to expand...
Click to collapse
if u want to use gb version just to flash roms u can go ahead and install this stock gb rooted + cwm from dr.ketan i tried workin very well
http://d-h.st/HJM
dannycanrock said:
if u want to use gb version just to flash roms u can go ahead and install this stock gb rooted + cwm from dr.ketan i tried workin very well
http://d-h.st/HJM
Click to expand...
Click to collapse
Hi, what i really want is root permission so i can use criskelo as my ROM..I was using gb (checkrom v6 with abyss) till now and thought of upgrading to ICS...if i get root permissions i can restore my apps using titanium and my problem wil be solved..titanium is currently saying i dont have root permissions and not restoring my apps...
Of course i will want to change kernels too to mix and match my requirements with battery life later on...
If your desire is to just get rooted, then download the Abysskernel touch zip file* : http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
Saved it in your external SD card and install it using Recovery Mode
After that, your phone should restart and check after if you have SU(Superuser) and CWM installed. If you do have it.. Rest assured your phone is already rooted.
*courtesy of RootGalaxyNote website
letters_to_cleo said:
If your desire is to just get rooted, then download the Abysskernel touch zip file* : http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
Saved it in your external SD card and install it using Recovery Mode
After that, your phone should restart and check after if you have SU(Superuser) and CWM installed. If you do have it.. Rest assured your phone is already rooted.
*courtesy of RootGalaxyNote website
Click to expand...
Click to collapse
Thats where the problem is..i have tried installing that file multiple times..it gets stuck at "installing update" and reboots into the system..
Within the phone i already have CWM (as the app) in my phone but it says it cannot work coz i need cf-root v5 or newer for it to work...can i use the LRG file as given in this forum to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1329360
file name : CF-Root-SGN_XX_DBT_LRG-v5.6-CWM5 (i had chosen the LRG modem while installing criskelo v9)
Are there different kernels for ICS and GB and maybe im trying the wrong file?
Also right now all i want is the root..but i also wanna be able to rollback to gb later and try other roms as per my convenience if i dont like criskelo..so any guidance keeping that in mind for the future will b much appreciated
Thanks..
shubhm_22 said:
Thats where the problem is..i have tried installing that file multiple times..it gets stuck at "installing update" and reboots into the system..
Within the phone i already have CWM (as the app) in my phone but it says it cannot work coz i need cf-root v5 or newer for it to work...can i use the LRG file as given in this forum to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1329360
file name : CF-Root-SGN_XX_DBT_LRG-v5.6-CWM5 (i had chosen the LRG modem while installing criskelo v9)
Are there different kernels for ICS and GB and maybe im trying the wrong file?
Also right now all i want is the root..but i also wanna be able to rollback to gb later and try other roms as per my convenience if i dont like criskelo..so any guidance keeping that in mind for the future will b much appreciated
Thanks..
Click to expand...
Click to collapse
What is your current ROM now? stock DXLRG? if it is, yes you can flash that kernel on your link (using mobile odin pro). Try to check back after thru CWM if it still gives you the same message or not.
Yes, there are different kernels solely for ICS only and also solely for GB alone. Don't make a mistake in mixing a GB kernel to your ICS Rom or else your phone gets fried.
letters_to_cleo said:
What is your current ROM now? stock DXLRG? if it is, yes you can flash that kernel on your link (using mobile odin pro). Try to check back after thru CWM if it still gives you the same message or not.
Yes, there are different kernels solely for ICS only and also solely for GB alone. Don't make a mistake in mixing a GB kernel to your ICS Rom or else your phone gets fried.
Click to expand...
Click to collapse
I am right now on Criskelo ICS v9..
The exact problem on my phone (id mentioned earlier too) is that its like its semi-rooted..things like cpuspy etc work..but titanium backup and moble odin dont..my main motive is to have titanium working so i can use the phone normally..
Now i see that criskelo has just launched v10.1 of the same ROM which has solved the semiroot+wifi issue..download is in progress and It wud be great to know how i can move on to that now..
Abyssnote kernel is not installing (stuck at "installing update" ) and as per my knowledge the phone isnt rooted (coz titanium backup and mobile odin dont work)..
Can i rollback to prerooted gb (i have this file: Rooted_Stock_Odex_N7000DDLB2 - nonwipe gb ROM) via PC odin to initiate the whole process again under present circumstances?
Whole process here meaning *prerooted gb+abyssnote kernel+criskelo v10.1 install*..
PS - i did all wipes while installing the present ROM (if it matters)..
Yes, you have what we call it here as a semi rooted phone. Not getting all the permissions to access system files inside. It's a good thing though that Criskelo has a new version to his ROM and that should be appropriate in installing it.
Can you rollback to pre rooted GB? Yes you can. Just pick the appropriate GB ROM. And oh by the way bud, stay clear on fully wiping your phone... Remember your walking in a thin line here when your flashing Custom ICS ROMs...
Just a heads up, that's all.
Cheers!
letters_to_cleo said:
Yes, you have what we call it here as a semi rooted phone. Not getting all the permissions to access system files inside. It's a good thing though that Criskelo has a new version to his ROM and that should be appropriate in installing it.
Can you rollback to pre rooted GB? Yes you can. Just pick the appropriate GB ROM. And oh by the way bud, stay clear on fully wiping your phone... Remember your walking in a thin line here when your flashing Custom ICS ROMs...
Just a heads up, that's all.
Cheers!
Click to expand...
Click to collapse
thanks a lot for the quick response
just a final query..i dont have abyssnote on my phone now..i have whatever criskelo v9 gave me by default (i chose cf-root during install) and im semi-rooted..
Under these conditions can i go ahead with installing the prerooted gb ROM that i mentioned?
and about the heads-up (sorry im still new to flashing ) do u mean i shudnt be wiping everything when i do the flash to the prerooted gb now? (the ROM i have is a no-wipe ROM as i said earlier)
Thanks again
shubhm_22 said:
thanks a lot for the quick response
just a final query..i dont have abyssnote on my phone now..i have whatever criskelo v9 gave me by default (i chose cf-root during install) and im semi-rooted..
Under these conditions can i go ahead with installing the prerooted gb ROM that i mentioned?
and about the heads-up (sorry im still new to flashing ) do u mean i shudnt be wiping everything when i do the flash to the prerooted gb now? (the ROM i have is a no-wipe ROM as i said earlier)
Thanks again
Click to expand...
Click to collapse
first, let's tackle your second question. If your on Criskelo ICS now, please under NO circumstances, YOU DO NOT FULLY WIPE your phone before going back to the pre rooted GB. There's a bug circulating around the forum and it's called the SUPER BRICK BUG. It'll fry your emMC chip (on your phone) thereby making it as a dead paper bag. There are countless of folks here already that have succumbed to the bug. Most have returned their dead phone back to Samsung Repair for an exchange on the motherboard. That is how deadly this bug can sting your phone.
So stay away from it. (It's better late than never, mind you)
on your first question,
Use PC Odin to downgrade to a pre rooted GB one. That's it.
Cheers!
letters_to_cleo said:
first, let's tackle your second question. If your on Criskelo ICS now, please under NO circumstances, YOU DO NOT FULLY WIPE your phone before going back to the pre rooted GB. There's a bug circulating around the forum and it's called the SUPER BRICK BUG. It'll fry your emMC chip (on your phone) thereby making it as a dead paper bag. There are countless of folks here already that have succumbed to the bug. Most have returned their dead phone back to Samsung Repair for an exchange on the motherboard. That is how deadly this bug can sting your phone.
So stay away from it. (It's better late than never, mind you)
on your first question,
Use PC Odin to downgrade to a pre rooted GB one. That's it.
Cheers!
Click to expand...
Click to collapse
whoaa!! thank god i didnt do that!!!
as a beginner, im gonna take it as a thumb rule then to use PC odin whenever i have to change ROM from any custom ICS to any other ROM and stay away from recovery mode..once im on prerooted gb thru PC odin i can do what i desire...that shud keep me safe i guess
Thanks for saving me a year of groceries
shubhm_22 said:
whoaa!! thank god i didnt do that!!!
as a beginner, im gonna take it as a thumb rule then to use PC odin whenever i have to change ROM from any custom ICS to any other ROM and stay away from recovery mode..once im on prerooted gb thru PC odin i can do what i desire...that shud keep me safe i guess
Thanks for saving me a year of groceries
Click to expand...
Click to collapse
hehehe no problemo bud.. that's should be your rule of thumb from now on.
P.S.
don't forget to hit my 'Thank' button if I've helped you in one way or the other. Cheers! :good:
Did you get rooted installing busybox su? I think you have partial root.
Install busybox from playstore and open it. Press install button. It should be fine.
Sent from my GT-N7000 using XDA Premium App
to check if you are fully rooted copy and paste in root / system...install busybox that helped me on ics roms then once your fully rooted flash a safe kernel ..dafuq , speedmod etc then flash new rom . dont do any wiping til on a safe kernel and read instructions fully
@All
Thanks for the your responses
This is what i did after getting some doubts cleared over here:
I rolled back to a prerooted ODEX gb ROM..and installed rocketrom for now..gonna use it for a while and check how people are finding criskelo v10.1..Once im satisfied with that gonna go ahead with flashing it..
Thanks again :good:

Stuck on boot logo after trying to install custom rom...

Help, my Note is stuck on the boot logo after trying to install a custom rom.
I have tried several roms now and non of them pass the boot screen. Getting a little scared now.
Here are the steps I have taken. Please tell me if I'm doing something wrong.
Stock rom
Root and install clockwork mod
nandroid backup
flash abyss kernal
wipe data
wipe cache
install custom rom
stuck on boot logo
I have just tried restoring the nandroid backup and the same thing happens... stuck on boot logo
Have I bricked the phone?
I can still access clockwork if that's any help.
I'm trying a restore via pc odin now.
Not got much hope though, seems to be stuck. The bar doesn't move anymore :'(
Hope an expert will assist.
What stock rom are you on, is it ics? If so nandroid backups and restores are dangerous on stock kernel.
Try flashing stock gb with pc Odin and go from there. If it fails, post at what point ie factory.fs.
Sent from my GT-N7000 using xda premium
K1LLER HORNET said:
....Stock rom
Root and install clockwork mod
nandroid backup
flash abyss kernal
wipe data
wipe cache
install custom rom
stuck on boot logo
......
Click to expand...
Click to collapse
Did you use CWM.zip to root your phone and flash Abyss?
Did you do wipe while still on Temp CWM?
If the answer is yes to both, you are Superbricked
Sent from my GT-N7000 using xda app-developers app
K1LLER HORNET said:
Help, my Note is stuck on the boot logo after trying to install a custom rom.
I have tried several roms now and non of them pass the boot screen. Getting a little scared now.
Here are the steps I have taken. Please tell me if I'm doing something wrong.
Stock rom
Root and install clockwork mod
nandroid backup
flash abyss kernal
wipe data
wipe cache
install custom rom
stuck on boot logo
I have just tried restoring the nandroid backup and the same thing happens... stuck on boot logo
Have I bricked the phone?
I can still access clockwork if that's any help.
Click to expand...
Click to collapse
After flashing abyss kernel have you rebooted to recovery to do all 3 wipes. ?
SpyderTracks said:
What stock rom are you on, is it ics? If so nandroid backups and restores are dangerous on stock kernel.
Try flashing stock gb with pc Odin and go from there. If it fails, post at what point ie factory.fs.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes it was stock ICS
I think I tried flashing stock GB. Odin just stops at a certain point; yes it's at factory.fs...
shoey63 said:
Did you use CWM.zip to root your phone and flash Abyss?
Did you do wipe while still on Temp CWM?
If the answer is yes to both, you are Superbricked
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I might have flashed Abyss while on temp. Can't really remember.
What do I do now?
Anything else I can try?
Get Amazon to replace it?
Edit: I can't seem to get into clockwork recovery anymore. It just says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
But I can get into the 'downloading' mode.
Help.
Wipes using Temp CWM.zip will result in brick
''Odin just stops at a certain point; yes it's at factory.fs''
that means you have bricked your phone.
So what can I do now?
Return to Samsung/Amazon?
Will they know that it was my fault?
Warranty
Go to recovery mode and check whether its showing binary counter 1 or above, ''Staus'' Official or Custom
If binary count is 0 and status is official you will get warranty
tell service center people that while updating new update via ota , your phone bricked
deleted
Flash GB
just pull out the battery. wait for 10 secs.. reinsert. go back to download mode..
use odin 1.85 and just select the tar.md5 fine in pda section..
Flash Gingerbread rom.
anoopva said:
Go to recovery mode and check whether its showing binary counter 1 or above, ''Staus'' Official or Custom
If binary count is 0 and status is official you will get warranty
tell service center people that while updating new update via ota , your phone bricked
Click to expand...
Click to collapse
It says:
Custom Binary Download: No
Current Binary: Samsung Official.
So I take it that's good right?
nokiamodeln91 said:
May be try installing one of the gb roms
Click to expand...
Click to collapse
anoopva said:
just pull out the battery. wait for 10 secs.. reinsert. go back to download mode..
use odin 1.85 and just select the tar.md5 fine in pda section..
Flash Gingerbread rom.
Click to expand...
Click to collapse
I will try that in the next 20 mins once the stock rom downloads.
To stop this happening again, could someone please, please, please post some noob friendly instructions on how I should flash a custom rom from stock.
I know someone might say 'just google it' or 'there are plenty of guides out there', but I was sure I had the steps nailed down otherwise I wouldn't have tried it.
It would be very helpful.
Especially to see exactly where I went wrong.
Anyway, thanks for all the info.
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
http://forum.xda-developers.com/showthread.php?t=1424997
anoopva said:
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
Yeah, I'm getting the stock GB (UK) rom from there.
Taking a while as a free user.
Thanks.
My Way of root + cwm (i have checked this in ICS only )
1. flashing safe kernels like hydracore 5.4 or Philz kernel 2.7 using PC odin
2. reboot
3. now you have root + CMW
4. open super su / superuse app
5. check for root access using Root Checker
6. Flash Supersu.zip in CMW if experience any root issues
7. now will be having stock ics with safe kernel and cwm.
anoopva said:
1. flashing safe kernels like hydracore 5.4 or Philz kernel 2.7 using PC odin
2. reboot
3. now you have root + CMW
4. open super su / superuse app
5. check for root access using Root Checker
6. Flash Supersu.zip in CMW if experience any root issues
7. now will be having stock ics with safe kernel and cwm.
Click to expand...
Click to collapse
Then what do I do?
Sorry, want to be as clear as possible.
Flashing Any Custom Roms
1. Flash Any Safe Kernel and reboot to recovery
2. do all 3 wipes (wipe data/factory, wipe cache partition, wipe dalvik cache)
3. Flash custom rom.zip
4. reboot
5. enjoy new custom rom
@ anoopva
Thank you for all your valuable info.
I may put it to use if I have the courage to risk a replacement phone.
Will update thread shortly on how flashing to GB goes.
I won't hold my breath.
You won't be able to flash a ROM anymore. Odin will get stuck. DO NOT attempt to flash a custom kernel through PC Odin. It will RAISE your flash counter and then it will be obvious that you have messed with your phone, so warranty will be voided! There is another way to get recovery, just wait.....
shoey63 said:
You won't be able to flash a ROM anymore. Odin will get stuck. DO NOT attempt to flash a custom kernel through PC Odin. It will RAISE your flash counter and then it will be obvious that you have messed with your phone, so warranty will be voided! There is another way to get recovery, just wait.....
Click to expand...
Click to collapse
Yes, just found that it got stuck.
Got further than with the stock ICS rom.
So do I have any options other than to return the phone?

[Q] camera not working galaxy note

Yes I know I am a NOOB at 46 but I still can't resist messin with **** that isn't broken. Loved the NOOB video.
The probem is I think I flashed a dodgey ROM app and got scared half way through and tried to reset the phone to factory.
This is my Galaxy Note GT n7000. I have done a factory reset 3 times and believe I am well on my way to bricking my phone if I do this again.
All is good so far except the CAMERA.
I have downloaded the necessary HOTFILE STOCK ROM for NZ from your site but am now scared ****less to flash it.
Should I just give it back to the manufacturer and say DUH I DONT KNOW WHAT HAPPENED and let them fix it
I also have GINGER BREAD 2.3.6 ROM Should I just flash this and hope for a fix
I also have ICS 4.0.4 XXLRG Should I Flash this after 2.3.6
Just need a little help and direction, as this is all quite new to me. Yes I'm sure this has all been done before and as I yell at my kids for doin stupid **** you deserve the same latitude.
Cheers ****
flash gb first.. after flashing the gb do a factory reset and then check your camera if it's working or not.. if you got lucky and got it working then flash a ics otherwise take it to manufacturer for repair.. don't mess up when you don't know what you are doing
Ps: if everything goes well and you flashed a ics rom then please flash a modified stock kernel http://forum.xda-developers.com/showthread.php?t=1901191
Sent from my GT-N7000 using Tapatalk 2
you can go ahead and flash ICS 4.0.4 but donot do a factory reset on stock recovery/kernel..
Camera
abhinav quietly brilliant said:
flash gb first.. after flashing the gb do a factory reset and then check your camera if it's working or not.. if you got lucky and got it working then flash a ics otherwise take it to manufacturer for repair.. don't mess up when you don't know what you are doing
Ps: if everything goes well and you flashed a ics rom then please flash a modified stock kernel http://forum.xda-developers.com/showthread.php?t=1901191
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply, but if you look at the other reply it says to flash ics and NOT to do a FACTORY reset and you say to do the factory reset what is the risk of doing the factory reset
Not to sure which version of PHILZ modified Kernel to use Can you help with this
If you choose GB, it's safe. But ICS kernels have a bug which can brick the phone if a factory wipe is made. What abhinav said was to do a wipe in GB. Which is safe. What I told you was you can directly install the ICS rom but refrain from wiping till you install a safe kernel.
Go to OAD forum of note and you will see Philz thread. Download any ICS kernel like DDLRB and place on external SD. Then boot in to recovery and choose "apply update from external storage". Choose the zip file you downloaded. Once done boot into recovery again. Yubwill have Cwm. Now you have a safe kernel. You can do a factory wipe.
nokiamodeln91 said:
If you choose GB, it's safe. But ICS kernels have a bug which can brick the phone if a factory wipe is made. What abhinav said was to do a wipe in GB. Which is safe. What I told you was you can directly install the ICS rom but refrain from wiping till you install a safe kernel.
Go to OAD forum of note and you will see Philz thread. Download any ICS kernel like DDLRB and place on external SD. Then boot in to recovery and choose "apply update from external storage". Choose the zip file you downloaded. Once done boot into recovery again. Yubwill have Cwm. Now you have a safe kernel. You can do a factory wipe.
Click to expand...
Click to collapse
Thank you for your help. I have fixed the camera with the GB update and went on to update ICS XXLRG, but this still isnt CwM.
Im not sure which Cwm to use There is an XXLSC-XJB which is close. Should I use this one or does it matter
. PhilZ files were unavailable for download as well is there another place to get this file and what is the easiest method to install
Choose as per your rom build number.
nokiamodeln91 said:
Choose as per your rom build number.
Click to expand...
Click to collapse
My wuild number after flashing ICS is IMM76D.XXLRG but nothing is the same the clsing osest on Philz is XXLSC XJB
Could I flash this using ODIN from my laptop?
Thanks
PS where is the thank you button for my responses I like to say thanks but cant seem to find where
You have an ICS rom. You can use any ICS kernel by Philz. Use xxlrt or ddlrb
Flashing via odin will increase the counter and yellow triangle at boot. Best is to flash via recovery. Place the zip version of the kernel on ext sd card and boot into recovery
nokiamodeln91 said:
You have an ICS rom. You can use any ICS kernel by Philz. Use xxlrt or ddlrb
Flashing via odin will increase the counter and yellow triangle at boot. Best is to flash via recovery. Place the zip version of the kernel on ext sd card and boot into recovery
Click to expand...
Click to collapse
Thanks again
I used modified ICS kernel PhilZ cwm6 XXLRG DBT 3.99 signed zip version but when I boot from SD it stops and says that it can't verify the signature and wont install
Do I need and unzip app? If I install this update will I have root access to run apps like Titanium Backup?
Or should I use the tar file in ODIN?
I do appreciate all your time and effort
What option did you select in recovery?
This is what you need to follow
1. Download the signed zip version of the kernel and place in external sd.
2. Boot into recovery and choose "apply update from external storage".
3. Choose the file you downloaded.
4. It will do the magic.
This will give you root access and yes apps like TB can be used. Also you will get CWM and it's a safe kernel too.
Dude he has done everything correct i know.. The v.3.99 of ics kernels are not built correctly when you flash them in stock ics recovery they always give a verification failed error.. But the older versions are ok to be flashed in stock ics recovery
Sent from my GT-N7000 using Tapatalk 2
I just flashed the ddlrb 3.99 and worked just fine. Where did you get this info?
Use the tar method only if u are confident enough
And yes you will be able to run applications like titanium backup
And for the flash counter just use triangle away
Search Google for it
All is well that ends well
nokiamodeln91 said:
I just flashed the ddlrb 3.99 and worked just fine. Where did you get this info?
Click to expand...
Click to collapse
Read some comments on the thread and i too have faced that.. But i guess philz has corrected his kernels they are installing now..
Sent from my GT-N7000 using Tapatalk 2

N7000 Boot Splash Soff Bricked?

Quote:
Originally Posted by mrjapan21 View Post
Hy guys,
I have an N7000 for some time, on stock rom. I had some custom rom 8 months ago but i returned o official and worked great. 2 days ago it started to shut down for no reason 5-6 times in 24 hours. Yesterday morning it didnt wanted to start at all. It shuts down some seconds after SIM verification PIN. I am on 4.0.4. I installed Philz cwm 6 safe kernel and tried to install again the XXLRI official rom. The same thing. So I am stuck.
There is anything I can do with it? I hope so... If not, i still got warrranty for it but i have to reset te counter.
Hope to hear from you soon
1.Did you do a factory reset or wipe on an unsafe kernel?
2.What error do you get in PC odin and at whst point?
3. Can you get into recovery?
4. If so can you flash Cm10.1? (Do wipes first from safe kernel)
5. If so, can you flash lr1 tar file successfully using mobile Odin pro?
Sent from my Samsung Galaxy SV using Tapatalk 3
Devices:
Samsung Galaxy Note (GT-N7000): Stock Rooted 4.1.2 with C.o.H. Hello World Kernel
Asus MeMO Pad Smart 10 (ME301T): Stock Rooted 4.2.1
Amazon Kindle Fire (1st Gen): Dualboot - CM10.1/SGT7 (4.2.2) / "Stockish" CM7 (2.3.7)
A22 Android Mini PC (MK802): Stock Rooted 4.0.4
Sony SmartWatch (MN2): Stock w/ WatchIt!
Sony Ericsson LiveView (MN800): Defunct!
For any people chiming in here - he pasted his original post on a different thread (http://forum.xda-developers.com/showthread.php?t=1857556&page=27) and my follow up post here...
@mrjapan21 --> please slowly and carefully read below (i copied and pasted from other thread my most recent post) and post back...
1. yes philz doesn't let you do a factory reset from settings to stop you from bricking your phone. I mean did you do a factory reset from STOCK ICS before this problem happened on the stock kernel...
2. IT IS IMPORTANT that you tell us WHAT THE ERROR in Odin 3 is...
3. You can get CM10.1 from dev section of xda. you need gapps too. This will all be linked in the original post of that thread. download it and put it on your phone's SD card - you can hook up the phone to computer and boot into philz and then use your phone as a storage device to copy it over. To install it, in philz, first wipe /data /system /cache /preload and dalvik-cache from mounts and storage. Then, flash CM10.1 zip. After that finishes, flash GAPPS.
3a. You can THEN use Mobile Odin to flash the .tar file from CM10.1 of LRI
3b. ALTERNATIVELY you can, AFTER ALL WIPES, try PC Odin 3 again to try to flash LRI
3c. ANOTHER ALTERNATIVE is that instead of flashing CM10.1 as i suggested above, you can try a modified samsung touchwizz rom from the development section of xda.
---------- Post added at 09:14 AM ---------- Previous post was at 09:07 AM ----------
I FORGOT - If you choose you JUST want to do warranty, and we can't get it working, you SHOULD be able to flash CM10.1 even if you damaged your phone, since you can get in recovery and its a light rom... then get far enough through the boot to run Triangle Away (search XDA) so that yellow triangle is gone... We can discuss this when the time comes if you want.
asf58967 said:
1. yes philz doesn't let you do a factory reset from settings to stop you from bricking your phone. I mean did you do a factory reset from STOCK ICS before this problem happened on the stock kernel...
2. IT IS IMPORTANT that you tell us WHAT THE ERROR in Odin 3 is...
3. You can get CM10.1 from dev section of xda. you need gapps too. This will all be linked in the original post of that thread. download it and put it on your phone's SD card - you can hook up the phone to computer and boot into philz and then use your phone as a storage device to copy it over. To install it, in philz, first wipe /data /system /cache /preload and dalvik-cache from mounts and storage. Then, flash CM10.1 zip. After that finishes, flash GAPPS.
3a. You can THEN use Mobile Odin to flash the .tar file from CM10.1 of LRI
3b. ALTERNATIVELY you can, AFTER ALL WIPES, try PC Odin 3 again to try to flash LRI
3c. ANOTHER ALTERNATIVE is that instead of flashing CM10.1 as i suggested above, you can try a modified samsung touchwizz rom from the development section of xda.
1. No, I didnt do it.
2. As a matter of that theres no error on ODIN. It says PASS!
3.ok to much info here tell me one to try it: cm10.1 of LRI or Samsung Touchwizz Rom.
Thank you
Click to expand...
Click to collapse
my n7000 got a problem. it keeps shutting down.
So:
1. i installed from sdcard via philz cwm6 CM9.0 (as i read on xda)
2. after that installed from sdcard CM10.1 via philz
3. flashed gapps
4. reboot
5. nothing. it keeps shutting down
what should i do next?
OK since your under warranty your best bet is to run triangle away from xda to remove your yellow triangle if you have it...
The use Mobile Odin and flash a stock image... DO NOT ROOT....and then send it in for warranty repair
Things are bad if if it is auto shutdown
Sent from my ME301T using Tapatalk 2
nsemem physical
How to reset counter?
mrjapan21 said:
How to reset counter?
Click to expand...
Click to collapse
I dont understand. The Mobile Odin is apk right? How can i open it in philz cwm?
Search for triangle away on xda and if you consider to donate please buy it from play store and install it you will find the option to reset counter.. Your phone will reboot in kind of download mode.. Press upkey to continue resetting would be the option.. Just follow the prompts
Sent from my GT-N7000 using xda app-developers app
Are ALL stock JB kernels safe? Also, should the phone get stuck in a boot loop while updating from OTA or flashing with Odin (coming from ICS) would it be safe to factory reset? Thanks
There is no use trying to risk formatting in stock recovery.. If you have issues with bootloops upgrading from OTA or odin.. Install philz kernel.. It is safe from brickbug.. Do the wipes that is format /system /data/preload /cache /dalvik cache and use odin to flash stock rom again.. Do remember to flash philz kernel after that..
Sent from my GT-N7000 using xda app-developers app
treacherous_hawk said:
There is no use trying to risk formatting in stock recovery.. If you have issues with bootloops upgrading from OTA or odin.. Install philz kernel.. It is safe from brickbug.. Do the wipes that is format /system /data/preload /cache /dalvik cache and use odin to flash stock rom again.. Do remember to flash philz kernel after that..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I need to keep stock, no CWM or non-stock kernels, which is why I'm asking if JB kernels are safe.
You can but in that case dont wipe on stock recovery..
Sent from my GT-N7000 using xda app-developers app
Misread

Categories

Resources