Related
I initially looked for a complete update guide on here and eventually found all the information I needed, but it was in multiple places and sometimes hard to find. After getting everything installed on my N1 I thought I would write a guide for other noobs like me that want to try out ICS or JB but would like a step-by-step guide. I hope that it is helpful. SpazeDog ROMs (both ICS and JB) are working wonderfully on my N1 - its a very nice update from CM7 with only minor issues so far.
Note: this was initially written specifically for SpazeDog roms, but as they have not been updated in a while I have provided links to other popular roms as well. If you would like to try a different ICS or JB rom this guide should work, just substitute with the appropriate rom and depending on the one you choose, you may also need to install Google apps.
If you looking at this guide and don't know the basics yet, check out the Newbie Friendly thread first.
Links to popular roms that will work using this guide:
Evervolv JB 4.2
Evervolv JB 4.1
CM 10, JB 4.1.2 by vijendrahs
CM 10, JB 4.2.1 by vijendrahs
Spazedog ICS/JB
Disclaimer: This guide involves making changes to your phone that potentially could brick your phone leaving it unusable. I am not liable for any changes you make or problems you may have with your phone. You should at least be familiar with entering commands using command prompt. This procedure will erase ALL the data on your phone. Make sure you have a backup of everything. A nandroid backup is highly recommended. Proceed at your own risk.
Before we get started make sure you have the following: a rooted Nexus One, a USB cable to attach your phone to a computer, and the Android SDK. If you are just now installing the Android SDK, open the SDK manager and make sure to install the "Tools" and in "Extras" the "Google USB Driver" are checked off and download them. Alternatively, you just download ADB and Fastboot (search this forum or google). If you have a Mac see this thread to get started with ADB and Fastboot.
If you Nexus One is NOT already rooted, then follow this guide from Cyanogenmod to root your phone. If you plan to use the adb commands below (they are optional) make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Step 1 - Download everything you will need:
4EXTRecovery Updater - the first link will download the .apk to your computer or phone.
BlackRose - go down to bottom of the first post to "Attached Files" and download the latest BlackRose zip file. If you don't want to do it yourself, check out this thread to flash a pre-made partition scheme. Often the developers (Evervolv) will also have a partition schemes that you can flash via Fastboot from your PC as well.
Your rom of choice - go to the downloads section and choose which rom you would like to try. Download the zip installation file.
Since you will be decreasing the size of your partition that apps can be stored on consider something like Mounts2SD or AD2SDX to move apps to your SD card.
Step 2 - Install and use 4EXTRecovery Updater on your phone:
The easiest thing to do is go to the 4ext link above, download and install it, directly from your nexus one. You can also install it by copying the APK file to your SD card, then using a file manager to find it and install it or you can use command prompt by opening command prompt, cd to the location of the Android SDK tools, and then type in the following command (replacing "path" with the path to where the APK is located on your computer):
Code:
adb install /path/4EXTRecoveryUpdater.apk
After you have installed 4ext open the 4EXT Recovery Updater. Tap "Settings" → "Allow" superuser request → "Yes" to connect to 4ext to get new data. Now select "Online install/upgrade" → "Yes" assuming it detects your nexus one correctly → select and install the latest 4ext recovery (at the top of the list).
After 4ext has installed, it will have placed a recovery image on your SD card - find it (its called recover.img) and it should be located in SD/Download/4EXT_Recovery_Touch/ folder. Copy this to your computer in case something goes wrong later and you need to re-flash the recovery image!
After installation of the 4ext recovery turn off your phone and boot into recovery by turning off your phone, turning it on again while holding the trackball down. This will boot into the bootloader, then press the power button once, use Volume Down to select "recovery" and press the trackball to select. Alternatively you can use the command prompt:
Code:
adb reboot recovery
Your phone should now boot into the 4ext recovery menu. Before moving on make sure you have any important stuff backed up because you are about to erase your entire SD card! Select "tools" →“partition sd card” → “remove all partitions and start from scratch.” Then for the 1st partition select “1024″ for a 1GB partition (this will be where ICS will be able to put your applications & data). Select "skip" for the 2nd partition and for the swap partition. Finally select the system “ext4″.
Step 3 - Copy the Evervolv, SpazeDog, or whatever zip installation file you have chosen to your phone's SD card
Download the ICS or JB zip file above and copy it to the root of your newly formatted SD card.
Step 4 - Installing and using BlackRose to resize the system partition:
Download the BlackRose application and install it on your computer. (Alternatively people have made flash-able partition schemes that you can just flash from your PC - usually links and instructions are provided in the installation rom's thread, Evervolv's here. If you do have access to a computer you can check out this thread).
Make sure your nexus one is attached via USB to your computer.
Open the BlackRose application - it will install and reboot your phone. Then follow along as shown in this video to resize your partitions for a JB ROM.
If you plan to install the ICS rom then use the video above as a guide but use the numbers (sizes) for the different partitions as indicated below.
After BlackRose has installed you will need to restart the application. After it has started up and recognized your device select "apply stock/custom blackrose" by typing in 1 and enter.
Then select "custom blackrose" by typing in 2.
Then type "resize" when prompted.
Now you will need to change the sizes of the system partition to 220 for ICS or 260 for JB.
Change the cache size to 8.
Finally name the new system partition, either "ICS" or "JB" depending on what you plan to install.
Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip.
Step 5 - Install JB or ICS:
Now turn your phone off and boot into recovery as you did in step 2.
4ext will load. Select "wipe/format" → "format all partitions (except sdcard)" and then also "wipe data/factory reset."
Now go back and select "install from sdcard" → "choose zip from sdcard" → and then select the ICS or JB zip you copied to the SD card in step 3.
Now either the ICS/JB installer will load or it will just install in one step. Just follow the prompts to install and enjoy.
Depending on the ROM you chose you may need to install Google apps (see the specific ROM thread for details) and will also likely want to flash an apps-to-SD script as mentioned above so you do not run out of space.
This method worked perfectly for me, hopefully it will work well for you as well. Enjoy.
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
diegolm said:
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
Click to expand...
Click to collapse
I am sorry to hear that. Can you boot into recovery or is that broken as well? If you can boot into ext recovery try selecting "wipe/restore" → "wipe data/factory reset" and then try to install BCM again. I probably should have added that above, I will do that now.
If your recovery is broken but you can get into the bootloader (holding down trackball while starting up), you should be ok. You will probably need to flash Amon_Ra's Recovery using Hboot as was described in the guide from cyanogenmod link above. If there is a way to directly hboot flash 4ext recovery I don't know how to do it. Then you can try installing BCM again from the Amon_Ra's recovery and re-install 4ext after you get everything working.
I tried the Texasice ROM and it worked, but I didn't like it! Later I tried again BCM and It worked! I dont know, maybe I did something wrong... Anyway thanks again for the guide!!
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
intel415 said:
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I am not sure which part you are referring to, but, yes, a few of the above instructions could be replaced with fastboot commands.
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
intel415 said:
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I used the adb commands above because you can use adb to reboot directly into recovery (fastboot you can only reboot normally or into the bootloader) and you can also use adb to directly install apk files - fastboot cannot do those two things - it is more for flashing images (recovery, roms, etc). In order for adb to work make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Note that adb commands are not required - you can reboot into recovery and install the 4ext manually.
It won't let me post a link right now, but just google "adb commands" to find a list of all the commands you can use.
Hope that helps.
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
intel415 said:
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
Yeah, its not bad - glad you got it working! ICS has been smoother than cm 7.2 for me as well.
Blackrose didn't ask me about userdata - it just assumed that automatically after putting in 220 system and 16 cache... I'll make note of that in the guide so its clearer. Thanks.
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Look for "recovery.img"
bobbyphoenix said:
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Click to expand...
Click to collapse
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
c2med said:
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
Click to expand...
Click to collapse
OK I'm stuck on what the path name is suppose to be. I tried it every way I can think of. Can you take a look at my screen shot, and tell me where I'm going wrong? The recovery image is on my desktop, so I'm not sure what exactly I should be replacing "path" with. I tried it from the link, and how you have it in your note. You don't have the "/to/" after path as in the CM link.
Well I tried a couple more times, and I can get it to seemingly do it, but it just hangs on this: (see screen shot) I get no error, and if I try to enter recovery on the phone I still get the reboot to the android and triangle with the ! in it.
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
n1newbie said:
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
tommert38 said:
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
Click to expand...
Click to collapse
WOW Thank you both. I spent literally hours yesterday trying to get it to work. Tried your suggestions, and in five minutes it was up and running!
---------- Post added at 12:31 PM ---------- Previous post was at 11:33 AM ----------
I may have spoke too soon. I followed the instructions to the end. Installed the ROM, and rebooted, but now after the X I get the Spazdog splash screen with the big Z in the middle and green dots moving, but it stays there forever. I waited 20 minutes one time. Tried reflashing, but I get the same thing.
---------- Post added at 01:17 PM ---------- Previous post was at 12:31 PM ----------
Just giving an update on progress (in case someone else is in my boat too) Flashed back to stock GB. Reinstalled recovery, and reflashed Spaz. Got past the X, and the splash screen, but now it's stuck on the Android logo that looks like the night rider beam that goes across the word. Been there now for about 10 minutes.
You do have Blackrose, right?
Yep. Installed everything according to OP. I think it may be the partition sizes as I think flashing back to GB messed with them. It says 220 and 10, but after checking some threads, it looks like there is one missing (userdata). I tried flashing a custom GB from here http://forum.xda-developers.com/showthread.php?t=1214543&page=98 and I was able to install everything. Got it up and running, so I'm going to start over for ICS, or do you think I can flash one of these for ICS http://forum.xda-developers.com/showthread.php?t=1637166 , and then just flash the ROM after?
220/10 means that you have 220MB for system and 10MB for cache, everything that's left will be userdata, so it doesn't ask (total is ~436MB, so userdata will be ~206MB in that case).
In HBOOT you can check how large your partitions are, or you could use the FreeSpace app for example. Always make sure your system partition is large enough before flashing a ROM.
Hello Folks,
I'm still stuck with my nexus one since I don't care that much about phones.
I've seen that jelly bean roms have made a significant progress. Thus I decided to give it a shot.
I started with installing adb and fastboot. :good: After that I rooted the nexus one :good: I've used this how to:
c2med blog, can't post links...
Next, I ran blackrose. :good: I saved the rom on the micro sd. Having done all the preperations I wanted to flash the JB rom.
I started the phone in bootloader mode but - unfortunately - couldn't access the recovery mode (ext4). I only get the Android figure and an exclamation mark.
In the how-to it sais i should use fastboot to flash the recovery made by ext 4.
Problem # 1: Ext4 generated a .zip, not a .img file
Problem # 2: I connect the device in fastboot mode, navigate to the adb/fastboot folder and use ./fastboot devices. The phone is recognized and I see the serial number. Next I try "flash recovery...." but I only get "command not found". Now, I basically have no idea what to do.
Which recovery should I flash? And how?
I'm so looking forward to your answers.
Androdicct said:
Hello Folks,
I only get the Android figure and an exclamation mark.
Which recovery should I flash? And how?
Click to expand...
Click to collapse
What you get is the stock recovery.
Flash 4Ext recovery or Amon RA recovery ( fastboot flash recovery recovery-RA-passion-v2.2.1.img)
Among the several guides to install JB, I suggest you to look at the following post:
http://forum.xda-developers.com/showthread.php?t=1804571
I just finished this morning the following process:
install RA recovery,
install Blackrose and resize partition,
install from SD card Evervolv-Perdo-3.2.0-Nightly-2013.01.13-passion.zip
install from SD card gapps-ev-jb-20120816.zip
I spent a lot of times reading and trying. I had an issue after installing Evervolv-perdo-3.1.0final-passion zip. That's why I switched to the Nightly (JB 4.2).
Once you are set install a2sd from within the terminal emulator on your N1.
In my opinion this is so far the best ROM I ever have had on my Nexus 1.:good:
I am impressed to the extend that I offer to my wife to do the same on her N1. She said no. No to unlock, no to root and of course no to custom ROM.
Good luck
Hi,
thanks for your reply. Thats basically what i did as well. But after using Blackrose i can't go into the recovery mode.
I used the same tutorial. The problem lies here:
"Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip."
It seems like I am unable to understand what I am supposed to do. Could somebody give me a step by step advice? I would prefer using some other recovery.img than mine...
Androdicct said:
Hi,
thanks for your reply. Thats basically what i did as well. But after using Blackrose i can't go into the recovery mode.
I used the same tutorial. The problem lies here:
"Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip."
It seems like I am unable to understand what I am supposed to do. Could somebody give me a step by step advice? I would prefer using some other recovery.img than mine...
Click to expand...
Click to collapse
It happened to me. I just re-flashed Amon RA recovery from the fastboot mode. Maybe somewhere you missed a step?
gunner1937 said:
It happened to me. I just re-flashed Amon RA recovery from the fastboot mode. Maybe somewhere you missed a step?
Click to expand...
Click to collapse
Okay I see. Could you give me the exact steps for the fastbood method? :angel: And where did you get the recovery?
Cheers!
Androdicct said:
Okay I see. Could you give me the exact steps for the fastbood method? :angel: And where did you get the recovery?
Cheers!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611829 : read posts #15 and #16.
In other words open your folder android-sdk-windows installed on the root of your C: hd. Click on the folder platform-tools and download Amon RA recovery in this folder. Left click anywhere on a blank area of this folder then press the key Shift (keyboard) and right click your mouse. In the drop down menu select Open command window. In the CMD, to be sure that the N1 is recognized by the pc (meaning the right drivers are installed) type ADB devices and press enter. You should see a string of numbers like HT9C......
Type adb reboot bootloader and press enter. You are in the fastboot mode ( and mood if I may say so) and the phone shows that it is in the bootloader. You can check again that N1 is recognized by the pc by typing fastboot devices. Same string appears.
Type fastboot flash recovery recovery-RA-passion-v2.2.1.img.
After the installation is completed boot in recovery, select Flash zip from sdcard, select the ROM you have dropped on the card. When the installation is completed go back to Flash zip from sdcard ( you are still in recovery mode) and select the gapps you have dropped on the sdcard.
Go back to Reboot system now. You are then out of the recovery and it takes some times for the N1 to boot to this beautiful JB
Edit:
http://forum.xda-developers.com/showthread.php?t=1804571 this is for posts #15 & #16
Androdicct said:
Okay I see. Could you give me the exact steps for the fastbood method? :angel: And where did you get the recovery?
Cheers!
Click to expand...
Click to collapse
As c2med posted in his guide, sometimes, people lose their recovery when they repartition using Black Rose. Hence, its always best to have Amon-RA or 4EXT flashable .img file in your PC so that incase you lose recovery, you can always flash it back.
Once you are in bootloader ( also called FASTBOOT mode) you can flash your recovery.
Then reboot into recovery from FASTBOOT (Shutdown and then restart using the recovery combination)
Once you are in recovery, follow the steps in c2med's guide (wipe cache/dalvik/etc - except sd-card ofcourse) and flash your ROM from sd card.
Then reboot into JayBee
In the screenshot you type:
$ ./fastboot devices
then you type:
$ flash recovery ......../recovery.img
Command not found.... Sure, flash it's not a command...
You need to type fastboot command first!
$ ./fastboot flash recovery ......../recovery.img
jolinnard said:
In the screenshot you type:
$ ./fastboot devices
then you type:
$ flash recovery ......../recovery.img
Command not found.... Sure, flash it's not a command...
You need to type fastboot command first!
$ ./fastboot flash recovery ......../recovery.img
Click to expand...
Click to collapse
Thank You! That's what I figuered out last night. Of course I also tried "fastboot flash" but forgot the "./". That was the key. Now the JB ROM works like a charm.
New Problem:
I can't install google apps. In fact I don't really need them. I only use a few apps and found the .apk files with google. Unfortunately the "official" Google apps like chrome don't work.
Plus, I wanted to install the camera (laggy in the evervolv - rom) and keyboard from here.
http://forum.xda-developers.com/showthread.php?t=1965290&page=38
When I try to install the .zip files in recovery mode I always get an error because of the signing... any help?
Androdicct said:
When I try to install the .zip files in recovery mode I always get an error because of the signing... any help?
Click to expand...
Click to collapse
When you're in recovery, select "Flash zip from SD card" and then select "Toggle signature verification" to disable signature verification, and then "Choose zip from SD card" and navigate to the zip file that you want to flash.
Guys any suggestion on how to uninstall CWM, want to give a try on roms using 4ext.
Lol. Its funny cuz i was thinking the exact same thing this morning.
However, its really simple. just go here. Go down to Download section and download 4ext Revocery Updater. Put that on your phone. install the application thru a file browser. Then open the application and press Online install | upgrade and it will ask for u to connect to 4ext servers. Click Do not display again and then press yes. Install the latest version. This will come in the form of a zip file and put that back on your computer.
Extract the recovery.img (dont rename it for simplicity sake) from the zip folder into ur sdk/platform-tools. Then open the Command Prompt and navigate to the platform-tools folder or alternatively just click shift right click and "open command window here" from within the platform-tools folder. Now power into bootloader and clock fastboot. It shoulds say fastboot USB. Now type into the cmd from your computer
fastboot flash recovery recovery.img
and hit enter. Then ure recovery should be flashed. Boot into recovery and u should have 4ext touch reovery
072665995 said:
Lol. Its funny cuz i was thinking the exact same thing this morning.
However, its really simple. just go here. Go down to Download section and download 4ext Revocery Updater. Put that on your phone. install the application thru a file browser. Then open the application and press Online install | upgrade and it will ask for u to connect to 4ext servers. Click Do not display again and then press yes. Install the latest version. This will come in the form of a zip file and put that back on your computer.
Extract the recovery.img (dont rename it for simplicity sake) from the zip folder into ur sdk/platform-tools. Then open the Command Prompt and navigate to the platform-tools folder or alternatively just click shift right click and "open command window here" from within the platform-tools folder. Now power into bootloader and clock fastboot. It shoulds say fastboot USB. Now type into the cmd from your computer
fastboot flash recovery recovery.img
and hit enter. Then ure recovery should be flashed. Boot into recovery and u should have 4ext touch reovery
Click to expand...
Click to collapse
I would give it a shot.
Do you already did it??
Enviado desde mi XT910 usando Tapatalk 2
Download 4EXT Updater. Download latest version of 4ext and the phone flashes it for you. Keep in mind that 4ext does not replace cwm, it just copies over it. You backups are still in the cwm folder.
Sent from one of the few remaining Incredible S'
Piccilino said:
Download 4EXT Updater. Download latest version of 4ext and the phone flashes it for you. Keep in mind that 4ext does not replace cwm, it just copies over it. You backups are still in the cwm folder.
Sent from one of the few remaining Incredible S'
Click to expand...
Click to collapse
What I see is that I can continue using both but by sepatate.
Once installed and in a future want to use the CWM just uninstall 4ext or have to do something special
Sent from my Incredible S using Tapatalk 2
Yes i did flash 4ext recovery and works like a charm. However, its just copied over cwm. I also dont think its possible to uninstall something once its flashed to your phone. its like when u flash something in the ROMs or other things like Mods from the recovery. U cannot remove it (at least from my basic understanding lol). Cuz whenever u wanna flash something in cwm it always says
Are you sure you want to flash this
-no
-no
-no
-no
-no
-yes
-no
-no
lol
072665995 said:
Yes i did flash 4ext recovery and works like a charm. However, its just copied over cwm. I also dont think its possible to uninstall something once its flashed to your phone. its like when u flash something in the ROMs or other things like Mods from the recovery. U cannot remove it (at least from my basic understanding lol). Cuz whenever u wanna flash something in cwm it always says
Are you sure you want to flash this
-no
-no
-no
-no
-no
-yes
-no
-no
lol
Click to expand...
Click to collapse
Once its flashed "over the top", CWM is removed and 4EXT takes its place. Basically anything you flash on top of something else removes what was there before in that exact place. For example if you were sitting on a chair and I came and replaced you, you wouldn't be on that chair anymore, would you?
That is just a precaution because you can go wrong with flashing the wrong thing, and you can't un flash
markj338 said:
Once its flashed "over the top", CWM is removed and 4EXT takes its place. Basically anything you flash on top of something else removes what was there before in that exact place. For example if you were sitting on a chair and I came and replaced you, you wouldn't be on that chair anymore, would you?
That is just a precaution because you can go wrong with flashing the wrong thing, and you can't un flash
Click to expand...
Click to collapse
Lol very nice metaphor!
I did this the other day and it worked fine. Just install the 4EXT app and install from there.
I installed the app and installed the recovery from there, everything working fine.
Sent from my Incredible S using Tapatalk 2
hi have done the what you instructed but am stuck at sending recovery for the past 20 minutes. I am on HTC Incredible S rooted with htc dev and having installed cwm with unlocked status with S-on, HBoot - 2.00.0000 & radio - 3822.10.08.28_M. Right now am using NIK's rom but cannot install other Rom's as am not on 4ext.. so please help me...Thanks in advance!!!
072665995 said:
Lol. Its funny cuz i was thinking the exact same thing this morning.
However, its really simple. just go here. Go down to Download section and download 4ext Revocery Updater. Put that on your phone. install the application thru a file browser. Then open the application and press Online install | upgrade and it will ask for u to connect to 4ext servers. Click Do not display again and then press yes. Install the latest version. This will come in the form of a zip file and put that back on your computer.
Extract the recovery.img (dont rename it for simplicity sake) from the zip folder into ur sdk/platform-tools. Then open the Command Prompt and navigate to the platform-tools folder or alternatively just click shift right click and "open command window here" from within the platform-tools folder. Now power into bootloader and clock fastboot. It shoulds say fastboot USB. Now type into the cmd from your computer
fastboot flash recovery recovery.img
and hit enter. Then ure recovery should be flashed. Boot into recovery and u should have 4ext touch reovery
Click to expand...
Click to collapse
Downloaded the 4ext recovery, installed it on phone, did the online install, upgraded and installed 4EXT_Recovery_Touch_v1.0.0.5_RC9, extracted recovery image from this file put it in the android folder with the following files adb (application file), AdbWinApi.dll, boot (image file), Fastboot (application file), Unlock_code file. Connected the phone to the computer in bootloader, went to fastboot and connected it to the computer which than showed fastboot usb, went into cmd and typed fastboot flash recovery recvoery.img in the android folder with the above mentioned files with the recovery image file. Now for the past 20 minutes it is stuck at sending recovery <5466 kd>.....
Please help??? dont know what I am doing wrong???
there is other way to Flash recovery by avoiding overwriting files...I used this many time to switch between 4EXT Touch >> CWM >> TWRP...
Right click on command prompt and select 'RUN AS ADMINISTRATOR'...
Give a path of fastboot drivers... (mine is C:/android/adb) depend on ua adb driver location...
type command...
fastboot erase recovery
it will erase ua recovery (It will erase ua recovery only and only if u run command prompt as administrator)
put ua desired recovery in adb folder where u installed adb and fastboot drivers (rename it to recovery for more connivance )
type this command now...
fastboot flash recovery recovery.img
it will send ua recovery to system and ua done...
Thanks but right now I am stuck at sending recovery, so if I remove cwm and than flash 4ext as you have suggested and I again get stuck on sending than I won't have any recovery...
Sent from my HTC Incredible S using Tapatalk 2
andzy said:
Thanks but right now I am stuck at sending recovery, so if I remove cwm and than flash 4ext as you have suggested and I again get stuck on sending than I won't have any recovery...
Sent from my HTC Incredible S using Tapatalk 2
Click to expand...
Click to collapse
So you are saying that after flashing 4ext, you cant boot into recovery???
Cuz i find that kinda funny considering the fact that 'flashing' means you overwrite and replace. Since 4ext is built from CWM I dont see how it wudnt be compatible. Plus our device is fully supported.
It's not that I can not boot into recovery...I cannot flash the 4ext recovery, it gets stuck at sending recovery for ages and than I have to unplug the USB and reboot the phone...
Sent from my HTC Incredible S using Tapatalk 2
Now that the bootloader is unlocked, everyone is asking "WTF do I do now?". Well, here's a bit of help to get you started. I'm assuming you already have adb and fastboot setup and working -- if not, quit reading and get that taken care of. Also, I only run Linux...so I'll try to be transparent and only list the fastboot commands.
I assume that you're not a complete moron and can Google what you don't understand.
Don't use the stock\SDK fastboot binary for flashing /system.
An updated fastboot binary for Lin\Win\Mac can be found here on the Batakang FTP from our local, neighborhood Mattlgroff.
Linux -- Rename the file to moto-fastboot and add it to a directory in your $PATH -- Ubuntu\Debian users can just add it to ~/bin (enabled by default)
Windows -- Rename the file to moto-fastboot and put it somewhere handy...that's on you to decide.
ROOT\ADMINISTRATOR INFO
On Linux, you might have to run as root in order to run some of the fastboot commands. If your system uses sudo for root commands, typing "sudo -i" will bring up an interactive sudo shell so you don't have to type sudo over and over again. If your system uses su for root, well, you already know the command.
On Windows, you have to enable Administrator Privileges to be able to run some of the fastboot commands.
Linux Terminal Hints
~/ means your home directory -- example -- "gedit ~/Documents/file.txt" would open file.txt in gedit easier than /home/yourusername/Documents/file.txt
You can add a * to file names and directories to not type as much -- example -- "gedit ~/Doc*/file.txt" is the same as the command above, only shortened. If two files have similar names, like Documents and Downloads, then you have to type the name up until the firs different character then add *.
Use the command "../" to go up\back one directory. The command is stackable so "../../" would go back 2 directories and so forth and so on.
Use "cd" to change directories. Is an example really needed for this...
Proper Apps to Use
For zip file editing, use 7-zip on Windows and Archive Manager (file-roller) on Linux
For editing text files on Windows use Notepad++ or any text editor that has unix line breaks -- do not use default Notepad or Wordpad -- you've been warned. Use what ever you prefer on Linux. I prefer Gedit myself.
Basic Fastboot Command Syntax
fastboot flash "partition" "image" -- flashes partition image where partition is where to write to and image is the path to the image being written.
example -- fastboot flash system /path/to/system.img
fastboot -w -- does a factory reset; to expedite things, "-w" can be added to "fastboot flash system system.img -w"
fastboot continue -- continue with the boot process
fastboot devices -- list devices fastboot recoginzes
fastboot -s "device model number" -- set the device fastboot will write commands to; use "fastboot devices" to find model number
fastboot reboot bootloader -- reboot phone into fastboot mode (or restart fastboot mode while in fastboot); same as "adb reboot bootloader"
fastboot help -- list all of this & more
Command Info
Not all the fastboot commands work for us. Specifically, the "erase" commands. If a wipe command doesn't work, skip it. I'll mark them with a ! at the end if it might fail.
Install CWM Recovery by Epinter
Read Epinter's RAZR HD CWM Thread
Download the recovery image
On stock rom, navigate to /system/etc and rename install-recovery.sh to install-recovery.sh.bak
Reboot into fastboot -- use "adb reboot bootloader" from Terminal\Command Prompt
Wipe the existing recovery -- "fastboot erase recovery" !
Flash the recovery with "fastboot flash recovery cwmrecovery6028-xt925_20130219-epinter.img"
That's it, CWM is installed.
Install Stock Fastboots JB
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img
fastboot -w
fastboot erase cache !
fastboot reboot
Install Stock Fastboots ICS
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img.ext4
fastboot erase cache !
fastboot -w
fastboot reboot
Install Alternate Radio
Reboot into fastboot
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
NON-HLOS.bin is found inside a fastboot zip.
Easy Kernel Install
Download kernel-flash.zip in the attachments[/URL]
Open the zip
Replace the zips current boot.img and device_tree.bin from the fastboot of your choice
Install the zip with CWM
By default, kernel-flash.zip comes with Mex Retail kernel and devtree
Easy CWM Install
Download recovery-flash.zip in the attachments[/URL]
Install the zip with CWM
Not sure if its SS compatible, but it is CWM compatible (for the lazy Photon Q users).
Obtain root after installing a Stock Firmware
There are two choices for obtaining root after a stock flash. the closed source SuperSu by Chainfire & and the open source Superuser by Koush.
Download SuperSu zip from Chainfire (Closed Source)
Download Superuser from Koush (Open Source)
Download the one of the root zips above.
Reboot into CWM/TWRP -- adb reboot recovery
Locate and flash the zip (see below for an alternative way)
Reboot, that's it. Nice not having to run exploits\hacks\Linux just for root
Install Rom/Zip file with ADB + CWM
CWM has the awesome ability to install zip files without having to manually copy them to the phone first. All's necessary is a PC with working adb.
Reboot into recovery
Select "install zip from sideload"
On PC, type "adb sideload /path/to/zip" and press enter
The zip will now be copied to the phone's cache & install
Once installed, do any requirements you'd normally do like wipe caches, etc
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
miketravis said:
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Unless you're not rooted with an unlocked BL, there's really no reason why it shouldn't work?
Sent from my N4'd Atrix HD
I was rooted before unlocking... shouldn't it still be rooted?
Sent from my MB886 using Tapatalk 2
miketravis said:
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Did you uninstall safestrap?
Yep. Should I reinstall it and try again?
Sent from my MB886 using Tapatalk 2
---------- Post added at 01:40 PM ---------- Previous post was at 01:30 PM ----------
reinstalled safestrap and tried again, success!!
Not sure why that made a difference but I got it so thank you very much.
miketravis said:
Yep. Should I reinstall it and try again?
Sent from my MB886 using Tapatalk 2
---------- Post added at 01:40 PM ---------- Previous post was at 01:30 PM ----------
reinstalled safestrap and tried again, success!!
Not sure why that made a difference but I got it so thank you very much.
Click to expand...
Click to collapse
Still did not work for me
Did you install recovery inside safestrap? Then fastboot cwm?
Sent from my MB886 using Tapatalk 2
miketravis said:
Did you install recovery inside safestrap? Then fastboot cwm?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I did. After fastboot, I followed the OP instructions to uninstalling the SS recovery and SS app. Boot into recovery and got the open android.
tvd0405 said:
Yes, I did. After fastboot, I followed the OP instructions to uninstalling the SS recovery and SS app. Boot into recovery and got the open android.
Click to expand...
Click to collapse
same here.
I have the same problem. I was able to flash cwm, uninstall the SS recovery, and uninstall the app. The first time I got the dead android symbol. I restored SS via Titanium Backup, reinstalled the SS recovery, and flashed cwm again. I tried rebooting into recovery and was able to get cwm working. As soon I uninstalled SS and rebooted, I got another dead android.
probably because were all on the XT926 if we were to revert back to XT925 then the recovery should work otherwise we will have to tweak the recovery to get it to work properly witht the XT926 software awesome thing is we can now free up the space that SS used for a rom slot however for noobs you might wana stick with SS once you hardbrick without anything to go back too it will be game over for your phone and then you have to con ATT for another
i got it.....
i was on ICS 404 bootloader unlcoked and rooted
how the hek you go on bootloader menu (power vol.down???????)
right now im accessing evything with boot widget from play market....
everything works i backed up my stock rom.....
can i try a jellybean rom????? and go back to ICS as many times i want???? from cwm recovery???
thanx
htchd2fix said:
i got it.....
i was on ICS 404 bootloader unlcoked and rooted
how the hek you go on bootloader menu (power vol.down???????)
right now im accessing evything with boot widget from play market....
everything works i backed up my stock rom.....
can i try a jellybean rom????? and go back to ICS as many times i want???? from cwm recovery???
thanx
Click to expand...
Click to collapse
From Phone Off, Hold Power and Both Volumes.
If the phone is on, do the above and when the screen goes black, press them all again...I've been doing that for an hour now
I installed MR via fastboot and just now got it booting. I made the mistake of using the SDK fastboot to flash /system.
skeevy420 said:
From Phone Off, Hold Power and Both Volumes.
If the phone is on, do the above and when the screen goes black, press them all again...I've been doing that for an hour now
I installed MR via fastboot and just now got it booting. I made the mistake of using the SDK fastboot to flash /system.
Click to expand...
Click to collapse
What's MR?
yes it works.....thanx
i was used to powr vol.down with atrix4g
ok..now can i install any rom and if dont like it go back to may backup????
still a little scared.....
i mean i wont loose root right?
Markyzz said:
What's MR?
Click to expand...
Click to collapse
Mexican Retail
Install instructions in OP
htchd2fix said:
yes it works.....thanx
i was used to powr vol.down with atrix4g
ok..now can i install any rom and if dont like it go back to may backup????
still a little scared.....
i mean i wont loose root right?
Click to expand...
Click to collapse
You won't lose root
And with an unlocked bootloader, all you gotta do is flash an updater zip with the su binary and app for Stock roms that don't have root
I'll link to a root zip in the op once I find one (or just make it; depends on how quick I find it in a search)
thanx again..
ahahahha...what a beautifullll day....
skeevy420 said:
Mexican Retail
Install instructions in OP
Click to expand...
Click to collapse
is there a point to flash a different firmware? is it required by any means?
I had SS and was backed up, I booted up the "stock ROM" and was successful in unlocking the BL and flashing CWM. I made a new backup of the stock ROM and restored it with success in CWM. In the video it show he has MR , but im confused as to why.
Also, I cant seem to get rid of safestrap....how in the hell do you uninstall it???
"Cyanogendmod.Org / Install CM for z3c / Unlock Your Xperia Z3 Compact" <--- That's the URL somehow.
Followed this instruction. Got myself the 12.1 .zip and .img.
I get error installaing the .zip and the .img isn't even an option:
The old rom is infinitly loading in that blue/purple wave line.
I then turn the phone off by holding down the power button until the phone restarts.
My history:
>Pressing up and down on the button rockers.
>Cyanogen Recovery starts.
>I choose "Wipe data/factory reset".
>I choose "Apply update".
(Apply from ADB doesn't work as it seems as ADB has no access for USB debugging. That's why install it from an external SD)
>Install "cm-12.1-20160918-NIGHTLY-z3c.zip" or its copy that I named "update.zip".
Error message:
[CAN'T POST PICTURE BECAUSE XDA HAS VERY FUNNY MEME RULES XDDD]
Private message maybe...? Can I send you guys URL pics via PM?
How can I get out of this loop?
If you want to go back to stock, use flashtool and flash whatever version you want (FTF method), I had an issue with flashing CM too, it said this is for aries but this device is z3c etc. Is this your problem?
marshalpear said:
If you want to go back to stock, use flashtool and flash whatever version you want (FTF method), I had an issue with flashing CM too, it said this is for aries but this device is z3c etc. Is this your problem?
Click to expand...
Click to collapse
I definitly want CyanogenMod 12.1 on my Z3C. Is it still possible?
I hope you can decypher the URL h t t p : / / t i n y u r l . c o m / j 6 4 u 8 u a
Few things you can do:
1- Download the ROM again, might be corrupted download.
2- Flash Lollipop FTF(not necessary), Flash TWRP recovery, boot into recovery, (If it asks, swipe to allow modifications to system), wipe everything (system,cache,dalvik,data), flash the ROM through TWRP recovery.
3- If it gives the error that I talked about in my first message, let me know.
marshalpear said:
Few things you can do:
1- Download the ROM again, might be corrupted download.
2- Flash Lollipop FTF(not necessary), Flash TWRP recovery, boot into recovery, (If it asks, swipe to allow modifications to system), wipe everything (system,cache,dalvik,data), flash the ROM through TWRP recovery.
3- If it gives the error that I talked about in my first message, let me know.
Click to expand...
Click to collapse
I tried #1 but I'm already stuck with the "SONY XPERIA" blackscreen at the very beginning when booting the smartphone. I suppose it's because of the failed installation and the not choosing of "Wipe clean/factory reset".
I hope that still doesn't count as bricking. I let the accumulator run dry and reload the battery and try to get into the Cyanogenmod Recovery again. Right now nothing is possible. =/
I hope that doesn't count as bricking. If so: These special OTG USB thingies fix a lot I heard, should I get myself one?
SYLVER SECOND said:
I tried #1 but I'm already stuck with the "SONY XPERIA" blackscreen at the very beginning when booting the smartphone. I suppose it's because of the failed installation and the not choosing of "Wipe clean/factory reset".
I hope that still doesn't count as bricking. I let the accumulator run dry and reload the battery and try to get into the Cyanogenmod Recovery again. Right now nothing is possible. =/
I hope that doesn't count as bricking. If so: These special OTG USB thingies fix a lot I heard, should I get myself one?
Click to expand...
Click to collapse
If you are on CM recovery, then there is the problem. AFAIK you can't flash anything through that, so you have to push TWRP on your device using fastboot and then flash AOSP/CM rom you want.
SYLVER SECOND said:
I tried #1 but I'm already stuck with the "SONY XPERIA" blackscreen at the very beginning when booting the smartphone. I suppose it's because of the failed installation and the not choosing of "Wipe clean/factory reset".
I hope that still doesn't count as bricking. I let the accumulator run dry and reload the battery and try to get into the Cyanogenmod Recovery again. Right now nothing is possible. =/
I hope that doesn't count as bricking. If so: These special OTG USB thingies fix a lot I heard, should I get myself one?
Click to expand...
Click to collapse
That's called a soft-brick. You should install the ADB drivers for your phone on your PC and then download TWRP for your phone (.img file) and rename the TWRP you downloaded to recovery.img .
You should put the recovery.img into the folder where your ADB drivers are installed, then Shift + RClick on that folder then select Open Command Window Here. Connect your phone in fastboot mode to your PC (Keep Vol. Up button then plug in your device). Type the following commands:
fastboot flash boot recovery.img
fastboot reboot
If you've done it all correctly, your phone should boot into TWRP recovery. From there you should go to wipe-advanced wipe and wipe your Cache,Dalvik Cache, System, Boot. DO NOT REBOOT NOW. You should go back to main menu and choose install, then choose the ROM you want to install. It should flash it if you don't have a corrupted file. After flashing, you can safely reboot your phone, don't forget to flash GApps if you want Google features on your Cyanogen, hope I helped!
More info about my error:
h t t p : / / t i n y u r l . c o m / z b e v y u 2
Each version of step #3 doesn't work. Still trying to figure out how to get TWRP...
marshalpear said:
That's called a soft-brick. You should install the ADB drivers for your phone on your PC and then download TWRP for your phone (.img file) and rename the TWRP you downloaded to recovery.img .
You should put the recovery.img into the folder where your ADB drivers are installed, then Shift + RClick on that folder then select Open Command Window Here. Connect your phone in fastboot mode to your PC (Keep Vol. Up button then plug in your device). Type the following commands:
fastboot flash boot recovery.img
fastboot reboot
If you've done it all correctly, your phone should boot into TWRP recovery. From there you should go to wipe-advanced wipe and wipe your Cache,Dalvik Cache, System, Boot. DO NOT REBOOT NOW. You should go back to main menu and choose install, then choose the ROM you want to install. It should flash it if you don't have a corrupted file. After flashing, you can safely reboot your phone, don't forget to flash GApps if you want Google features on your Cyanogen, hope I helped!
Click to expand...
Click to collapse
K, 90% of this works. I got the TWRP "app" and I cleaned the cache and all that, but I had to reboot. You see:
To transfer new media I need to remove my external SD from the z3c to my old LG. The LG is connected with my PC and is therefore a kind of card-reader. I tried 2 different nightly thingies.
I still get extraction errors, see:
h t t p : / / t i n y u r l . c o m / h j j d 4 o b
I downloaded 2 different nightlies 6 times already. I dunno. Somethings off here.
Also: For what is the recovery.img? Should I install it afterwards?
I have to restart the phone in order to replug the SD card and get recognigzed by the TWRP.
I did everything from this:
http://forum.xda-developers.com/showthread.php?t=2522762
Because of Error 7.
Now I get Error 6.....
SYLVER SECOND said:
K, 90% of this works. I got the TWRP "app" and I cleaned the cache and all that, but I had to reboot. You see:
To transfer new media I need to remove my external SD from the z3c to my old LG. The LG is connected with my PC and is therefore a kind of card-reader. I tried 2 different nightly thingies.
I still get extraction errors, see:
h t t p : / / t i n y u r l . c o m / h j j d 4 o b
I downloaded 2 different nightlies 6 times already. I dunno. Somethings off here.
Also: For what is the recovery.img? Should I install it afterwards?
I have to restart the phone in order to replug the SD card and get recognigzed by the TWRP.
I did everything from this:
http://forum.xda-developers.com/showthread.php?t=2522762
Because of Error 7.
Now I get Error 6.....
Click to expand...
Click to collapse
OK, your problem is that you messed up your system, so wiping it is not gonna solve this issue. You need to download a stock firmware file (an FTF file) and flash it through Flashtool, because your device name seems to be "." which is why you were getting "error 7". As for the recovery.img, you will use it to flash TWRP recovery on your phone. TWRP app doesn't work correctly if you don't flash it to your recovery partition so do as follows:
1- Download Flashtool, install the drivers of your device for Flashtool (you can search it on xda forums), download an FTF file, any of them should do, but as you will install CM 12.1, I recommend a Lollipop FTF.
2- Flash the firmware through Flashtool. This will turn your phone into a stock one. Unlock your bootloader if you haven't already, which I believe you have.
3- Flash the TWRP recovery through fastboot (follow my earlier instructions)
4- After you open TWRP recovery do the wipes, note that you can still connect your phone to your computer for file transfers in TWRP Recovery.
5- Install the CM zip file through recovery
IF YOU GET ERROR 7 SAYING :this package is for device: D5803, D5833, z3c; this device is aries.
7- Open the CM 12.1 zip file on your computer and proceed to META-INF/com/google/android directory.
8- In that folder you should see "updater-script", extract it to somewhere and open it with Notepad.
9- Once you open it press Ctrl + H to change some of the lines.
10- Write "D5833" without the quotation marks in the first space and write "aries" without the quotation marks into the second space and click replace all.
(This will change all "D5833" to "aries" in the file therefore making it usable for your device) Save the file and put it into the directory of where you found it, replace it with the original.
11- Now put the edited .zip file into your phone storage, and flash it through recovery. It should work. :good:
marshalpear said:
3- Flash the TWRP recovery through fastboot (follow my earlier instructions)
Click to expand...
Click to collapse
I think he shouldn't flash TWRP on boot partition, as you wrote. That might cause further issues. I am flashing my recovery through fastboot without problems using next command:
fastboot flash recovery recovery.img
Cirra92 said:
I think he shouldn't flash TWRP on boot partition, as you wrote. That might cause further issues. I am flashing my recovery through fastboot without problems using next command:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
It won't matter. Because when he flashes the CM, it'll flash the CM Recovery along with it.
marshalpear said:
It won't matter. Because when he flashes the CM, it'll flash the CM Recovery along with it.
Click to expand...
Click to collapse
Yea I know, but before that, he needs to have a working TWRP on right partition to be able to even flash any rom.
Cirra92 said:
Yea I know, but before that, he needs to have a working TWRP on right partition to be able to even flash any rom.
Click to expand...
Click to collapse
That's why I wrote those steps for him/her to follow. If you flash TWRP to boot partition, when you boot the phone, it will go straight into TWRP. If you flash it to recovery partition, you'll have to boot it manually.
marshalpear said:
That's why I wrote those steps for him/her to follow. If you flash TWRP to boot partition, when you boot the phone, it will go straight into TWRP. If you flash it to recovery partition, you'll have to boot it manually.
Click to expand...
Click to collapse
Logical step, didn't think about it that way, I assumed OP knew how to enter recovery
"1- Download Flashtool, install the drivers of your device for Flashtool (you can search it on xda forums), download an FTF file, any of them should do, but as you will install CM 12.1, I recommend a Lollipop FTF.
2- Flash the firmware through Flashtool. This will turn your phone into a stock one. Unlock your bootloader if you haven't already, which I believe you have.
3- Flash the TWRP recovery through fastboot (follow my earlier instructions)
4- After you open TWRP recovery do the wipes, note that you can still connect your phone to your computer for file transfers in TWRP Recovery.
5- Install the CM zip file through recovery
IF YOU GET ERROR 7 SAYING :this package is for device: D5803, D5833, z3c; this device is aries.
7- Open the CM 12.1 zip file on your computer and proceed to META-INF/com/google/android directory.
8- In that folder you should see "updater-script", extract it to somewhere and open it with Notepad.
9- Once you open it press Ctrl + H to change some of the lines.
10- Write "D5833" without the quotation marks in the first space and write "aries" without the quotation marks into the second space and click replace all.
(This will change all "D5833" to "aries" in the file therefore making it usable for your device) Save the file and put it into the directory of where you found it, replace it with the original.
11- Now put the edited .zip file into your phone storage, and flash it through recovery. It should work."
K, so I guess I'm finished with #1 and #2. Sorry, had a ****-ton of chores to do. Before I progress, I wanted to send you guys
this pic:
https://img3.picload.org/image/rdricord/unbenannt.png
Is the root access necessary, or can I progress?
That's the sites I've used, if anybody wonders why something is the way it is right now:
http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
http://forum.xda-developers.com/showpost.php?p=66275965&postcount=2029
http://forum.xda-developers.com/showpost.php?p=60001557&postcount=829
Von "Sony Mobile Flasher by Androxyde":
"23/023/2016 22:23:52 - INFO - Root access denied
23/024/2016 22:24:07 - ERROR - Illegal key size or default parameters
23/024/2016 22:24:12 - ERROR - Illegal key size or default parameters
23/024/2016 22:24:13 - WARN - Please check your Phone and 'ALLOW' Superuseraccess!
23/024/2016 22:24:14 - INFO - Root access denied"
FlashTool says the firmware has been flashed so I don't understand what are you trying to do after that? After flashing the FTF file you should flash TWRP through "FASTBOOT". Then follow the instructions.
K, did everything you said. Read everything five-times. Replaced "D5833" to "aries" and all that stuff. Still getting ERROR 7.
The phone is still in TWRP Recovery from FASTBOOT / BOOTLOAD because I "constantly" charge it to stay in recovery. If I had found this Mount option earlier... kinda feel stupid for that. So I still get ERROR 7. I copied the modified .zip to internal storage and SD card to see if I get the same error twice. And yeah.
Exact error message in red letters:
"Updater process ended with ERROR: 7
Error installing zip file ' /external-sd/cm-12.1-20160918-NIGHTLY-z3c.zip'
Updating partition details...
... done"
So I forethought and cleaned the cache and need somewhat new instructions.
Also:
I suppose with "Advanced Wipe" and your instructions you meant this points, right?:
http://tinyurl.com/jc5rv3a
SYLVER SECOND said:
K, did everything you said. Read everything five-times. Replaced "D5833" to "aries" and all that stuff. Still getting ERROR 7.
The phone is still in TWRP Recovery from FASTBOOT / BOOTLOAD because I "constantly" charge it to stay in recovery. If I had found this Mount option earlier... kinda feel stupid for that. So I still get ERROR 7. I copied the modified .zip to internal storage and SD card to see if I get the same error twice. And yeah.
Exact error message in red letters:
"Updater process ended with ERROR: 7
Error installing zip file ' /external-sd/cm-12.1-20160918-NIGHTLY-z3c.zip'
Updating partition details...
... done"
So I forethought and cleaned the cache and need somewhat new instructions.
Also:
I suppose with "Advanced Wipe" and your instructions you meant this points, right?:
http://tinyurl.com/jc5rv3a
Click to expand...
Click to collapse
OK, so try flashing TWRP to recovery partition to get you out of TWRP after you boot by writing these commands in the ADB:,
fastboot flash recovery recovery.img
fastboot reboot recovery
This will flash the TWRP to recovery partition and will boot you into TWRP. As you do this you won't have a go at the recovery again but for this time. You can reach the TWRP by pressing the Vol. Down button when the phone vibrates at the boot. Also if you want to force shutdown your phone you can use Vol. Up + Power Button combination for a few secs.
marshalpear said:
OK, so try flashing TWRP to recovery partition to get you out of TWRP after you boot by writing these commands in the ADB:,
fastboot flash recovery recovery.img
fastboot reboot recovery
This will flash the TWRP to recovery partition and will boot you into TWRP. As you do this you won't have a go at the recovery again but for this time. You can reach the TWRP by pressing the Vol. Down button when the phone vibrates at the boot. Also if you want to force shutdown your phone you can use Vol. Up + Power Button combination for a few secs.
Click to expand...
Click to collapse
K, cool feature. Got it all set up now, but back to the main subject:
Is it even possible to install CyanogenMod 12.1 on Sony Z3C?