hi everybody. i have a p1000 and i am wondering what is the correct software i need to download in order to go from froy to gingerbread? it says jk5 jj7 kernel 2.6.32.9 and i am from greece . when i do the thing with the IMEI i see it is using COS. thanks for you help as you proably realize i am a complete newbie
Go to the stock JQ1 gingerbread prepared by Chainfire. Use the version with the bootloader. Then flash the Chainfire v3.3 rooted kernel.
From this, you can flash any other rom you like.
i suggest you follow this guide http://p1000.teamovercome.net/?page_id=64
Hey everyone. I am very interested in rooting, and hopefully flashing once i have done the basic root first. Please can you answer each question I have an Orange branded SGS GT-i9000. Here are the specs:
FW Version: 2.3.5
Baseband Version: I9000BVJV3
Kernel Version: 2.6.35.7-I9000BVJVC-CL679241 [email protected] #2
Build Number: GINGERBREAD.BVJVC
Question 1: do i need to know the whole of the kernel or just part of it?
Question 2: I always see rooting guides saying 'How to root (FW version) JV(something). Where does the JV come from, as i have 2 types of JV, JV3 and JVC. So what does rooting depend on other than firmware version?
Question 3: I have noticed the Orange firmware is a different JV. So how do i know the root will work with my version as the root guides are always on stock roms?
Thanks in advance : )
Hello Tarnwilliamson, I think I am in the same boat as you, I also am on Orange with the same spec phone as you wanting to root. I was just wondering have you found out anything about rooting this phone? I have searched dev and q & a section but there seems to be no posts on this topic. I dont want to start a new thread so I though I would ask you first. Thank u in advance.
hello
You may try with Super one click root or try to flash your rom with odin to STOCK ROM (i have I9000xxjvu for example) and use CFROOT for your rom with PDA in odin. That gives u the root accsess, superuser and busybox ( CFroot IS A KERNEL) it is many subject on XDA.
Hello Marcinrek21, Thank you for your reply. As my Build number ends with jvc isnt there a specific file I need to flash with if using Odin? Or am I mistaken and I can flash with any cf root file as long as it is for a gt19000? As for super one click is that still compatibable with 2.3.5 as I remember reading somewhere the bootloader may be locked with gingerbread? Thank you in advance.
Hi guys,
So this is my first android phone. I bought it in Shanghai, so it comes with bunch of chinese crapware preinstalled which is really annoying.
After doing some research, it appears that the only way for me to get rid of that is to root the phone (which I've never done before).
I have two goals in mind:
1) being able to delete all the crapware that came preinstalled with the phone
2) being able to install "market enabler" so that I can download "real" apps
I have downloaded Dr. Ketan's guide on how to root the SGN.
My phone's info:
Build Number: GINGERBREAD.ZSLA2
Baseband version: N7000XXLA4
So, from the guide it appears that I dont have a direct rootable ROM, and I need to flash (is that what its called?) it with Odin.
Now, I have downloaded the "SGN_XX_OXA_KJ1_FACTORYFS.zip" file. Correct me if I am wrong, but I am guessing that this file is the "rooted factory ROM"...
However, later I came across this thread http://forum.xda-developers.com/showthread.php?t=1424997 with bunch of [stock ROMs].
My goal is to have "normal/factory/oem/stock/whatever you call it" ROM, with SuperUser access aka root.
So, the question is - should I stick with the guide and use "SGN_XX_OXA_KJ1_FACTORYFS.zip" ROM or should I flash it with one of the ROMs from the [stock roms] thread?
Cheers!
denis_the_quant said:
So, the question is - should I stick with the guide and use "SGN_XX_OXA_KJ1_FACTORYFS.zip" ROM or should I flash it with one of the ROMs from the [stock roms] thread?
Cheers!
Click to expand...
Click to collapse
You can do either
KJ1_factoryfs if pre rooted ROM, you won't need to root it after downgrading
While if you downgrade any rootable ROM from stock ROM thread you have mentioned, you have to root it.
dr.ketan said:
You can do either
KJ1_factoryfs if pre rooted ROM, you won't need to root it after downgrading
While if you downgrade any rootable ROM from stock ROM thread you have mentioned, you have to root it.
Click to expand...
Click to collapse
Thanks! will try tonight.
Cheers mate.
dr.ketan said:
You can do either
KJ1_factoryfs if pre rooted ROM, you won't need to root it after downgrading
While if you downgrade any rootable ROM from stock ROM thread you have mentioned, you have to root it.
Click to expand...
Click to collapse
BTW,
do I need to install CWM? I am not planning on installing other ROMs or anything like that... just want to wait for the official release of ICS, that's all.
Not compulsory.
You can also purchase mobile odin pro, if you want to update rom to latest version.
Or u can use as it is. But kj1 or any older rom are not tuned as newer one, may experience battery drainage, leg etc, but if u r satisfied, thn you can keep it till ics.
Sent from my GT-N7000 using xda premium
Samsung N7000 rooting upgrading to lollipop
Hi Guys
I am a biginner here. I got Samsung N7000 ZSL02 bought in south africa. It got Chinese firmware and i cannot speak the language. Another thing is i tried downloading a bank app to it but i got error message that says: App not applicable to rooted device.
I had Samsung SIII before this N7000 and the os was fantastic. I am frustrated i am not sure what to do.
Can you please send me links were i can get all what is needed to root, flash and install lollipop successful on my device . I searched everywere on the internet but i was just a victim of scammers and ads app. Please help
please send me all thats needed to install v5.1 android or even v6.0 successful.
[email protected]
hye, wanna ask how to flash to other firmware version of GB (from other country)? From currently firmware India version (PDA:N7000XXKL3 CSC:N7000ODDKL1) to Malaysia (PDA: N7000DXLC2 & CSC:N7000OLBLC2). huhu. tq!
Hi , malaysian ?
Actually there have a nice guide on development section
Just check it here -> Click Here
Hope it may help you, coz it come with picture also
Simple step
1- download stock firmware
2- flash stock firmware with pc odin
3- done
Hi all,
I have just bought me a galaxy note with 2.3.6 firmware,
And i wonder what does the PDA and CSC mean in the firmware upgrade to ICS?
http://forum.xda-developers.com/showthread.php?t=1424997
I don't really understand which firmware to choose...
I want to choose 4.0.4 but dont know which one.
I am currently using :
model number GT-N7000
android version: 2.3.6-mobile-star
baseband version: N7000XXLPT
Kernel: 2.6.35.7-N7000XXLA4CL886827
Build: GINGERBREAD.XXLA6
What is my PDA?
What is my CSC?
What is PAD?
What is CSC?
Which firmware can i choose?
What is the difference between all the firmwares?
Thanks in advance
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
I see
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!
backup your efs first http://forum.xda-developers.com/showthread.php?t=1606012
you need root for that you can get that by following dr ketans guide in sticky section developement.
Sent from my GT-N7000 using Tapatalk 2
mailman77 said:
Thanks for the reply dr.ketan now i understand something!
Just to make the picture complete:
when i dial *#1234# i get:
PHONE: N7000XXLPT - what that means?
CSC: N7000EULA1 - what that means?
I understand that because my phone uses PDA with XX i can use any EuropeanROM ?
Thanks a lot!
Click to expand...
Click to collapse
you can update to any rom any time, just follow dr ketans thread and follow pc odin route
Updating throught Kies/ota is tricky, you need pcode sometimes of the country rom you want to go to, no root, and csc of that countries rom, and a whole stock rom installed for that csc. Best to just always follow pc odin route lol
also read stickies and threads fully cause a lot messed up by not doing that. One tip on ics do not wipe/factory reset
happy reading and searching
Sent from my GT-N7000 using Tapatalk 2
how to install CWM application for N7000XXLRK
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,
lol csc thats important, 3 letter code by dialing *#06# to get emei,
then dial *#272*emeihere*
Sent from my GT-N7000 using Tapatalk 2
mailman77 said:
Hi,
Thanks for the answers!
I have managed to burn the latest firmware N7000XXLRK successfully.
I want to have the application CWM like i had before how do i install the permanent CWM for this firmware?
Thanks again,
Click to expand...
Click to collapse
Find rooting guide from my signature n get cf rot kernel
Ps: cf root kernwl for lrk not available, use lrg instead of that.
Or use custom kernel like speedmod
Sent from my GT-N7000 using xda premium
CWM and battery
I have rooted the N7000XXLRK successfully.
You mean that i can not install CWM application on that firmware?
So how do i backup the whole phone without CWM?
And another question:
i want to see the battery percentage on the upper bar and not only the battery icon indication, how do i do that? is that possible?
Thanks,
best, not to use cwm on a kernel that can trigger the emmc brickbug, best to use kernel like speedmod k3-11 or likewise which has the trigger for emmc brickbug disabled when doing anything in cwm, or in ics.
Dont wipe, factory reset, change csc, or delete large files on a stock ics kernel
to eliminate these issues read threads/first posts of kernel threads btw.
tip: use kernels based on tw, or stock for stock ics, kernels based on cm9 or other are not for stock..
tip2: when nandroid backup, and wanting to recover that, you need same kernel installed as when backup was made. So use a safe kernel
tip3 when recovering apps and data on different roms, issues can arise due to different database structures, which is why its not really supported on i.e. cm9
tip 4 Some roms are wipe some are not. when going to and from gb and ics stuff could linger, which could cause softbricks. There are clean ways to go to and from, enought threads on that's but always do it on safe kernel whatever wipe action
Sent from my GT-N7000 using Tapatalk 2
phone does not support upgrade via kies
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
i am on the latest ICS stock rom (INU), the CSC shows XXX, when i connect the device to kies
i have tried the *#272*IMEI#
and changed it to INU, the device got full wipe once this happened , still i get the same CSC-XXX
and the same - phone does not support upgrade via kies
plz help
Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab
if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
if you made efs backup with working ota, restore it, if you didnt, check if:
no custom parts installed (kernel)
Or parts that didnt come with same stock rom version (e. g. if you changed modem)
Or if your pcode is different.
pcodin is faster lol
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
i installed the new firmware INU using the pc odin
note is unrooted no apps are installed
i hav no backup of any of the stock firmware n efs ..
.. ll that - "Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab"
work. i need to try it nw ! !
nokiamodeln91 said:
Download ur stock rom and extract the cache. img file from it. install this cache. img using pc odin selected in the csc tab
Click to expand...
Click to collapse
his didnt work.. pcodin CSC doesn't recognize img files ! ! !
ShreyasRewagad said:
his didnt work.. pcodin CSC doesn't recognize img files ! ! !
Click to expand...
Click to collapse
yeah u r right... my bad.. use mobile odin
nokiamodeln91 said:
yeah u r right... my bad.. use mobile odin
Click to expand...
Click to collapse
this wayzz not workin.. it requires root.. my note is unrooted.. plz temme sum other way..
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
Click to expand...
Click to collapse
Thanks for the explanation, but what do the letters PDA actually stand for?
(And please don't say "Personal Digital Assistant," because that's all I can find and I've been searching all day.) :fingers-crossed:
I'm sure it must mean something else when it is being used in a discussion of Android mobile phone software.
Does anyone know what "PDA" actually stands for, what are the actual words represented by that abbreviation?
Thanks in advance for your help.
CSC and Google Play App
I've tried a lot of ROMs. Some ROM makes impossible to install applis from Google Play Store. For example when using the Sweet V5 ROM, I cannot get Firefox nor Chrome from the market. It says my Galaxy Note is incompatible. Do you have any idea of CSC management ?
please help me
dr.ketan said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Click to expand...
Click to collapse
dr. ketan sir, i have some problem to understand PDA and CSC defenition and i also have some problem about unrooting my note 2
my note 2 build number is N7100UBDMA1 and i want to unroot my device.
my question is, i see your answer above that i can use any ROM for any country as long as my device is unlocked ? so can i use indonesia firmware to unroot my device ? because i bought this device at china and now i'm living in indonesia
thank you so much for your attention sir