I was wondering if anyone has found a car dock yet that's designed for the Nexus 7.
I am mainly looking for something that I can basically set it into and allow it to be hooked up to my car's power while running an aux cable (my car doesn't have bluetooth) but still have bluetooth included anyways.
I'd like to avoid the generic car mounts with charges and such seeing as I don't want to have to put it into the mount, plug in the power, then plug in the aux cable.
http://forum.xda-developers.com/showthread.php?t=1785899
It is 'generic' but is pretty good. I have used Arkon products for years and have yet let me down.
kpjimmy said:
http://forum.xda-developers.com/showthread.php?t=1785899
It is 'generic' but is pretty good. I have used Arkon products for years and have yet let me down.
Click to expand...
Click to collapse
Yeah, unfortunately not what I'm looking for as that's a mount, I want the whole package together, not separately.
Anyone find a car dock yet for this, I've been looking and so far no luck, just more or less generic car mounts still.
You can wait for brodit. No release date.
Best to wait, nothing official out yet.
That's unfortunate that they didn't bother to launch something like this with the release, or close to it as a lot of people probably want to use this as an in-car gps/entertainment (music) system.
Well it's been a few weeks now, anyone find a Car Dock yet (not a generic mount)
arinoth said:
Well it's been a few weeks now, anyone find a Car Dock yet (not a generic mount)
Click to expand...
Click to collapse
Have you checked out RAM Mounts? I can't post a direct link since I don't have 10 posts, but they now have some specific mounts for the N7. I've been using their products for years on my motorcycles and they're top quality products. They have a solution for just about any mounting idea you have.
Just Google RAM Mounts and on their home page, in the center column, third post down, you'll see a link for Google Nexus 7 Mounts.
BartmanJax said:
Have you checked out RAM Mounts? I can't post a direct link since I don't have 10 posts, but they now have some specific mounts for the N7. I've been using their products for years on my motorcycles and they're top quality products. They have a solution for just about any mounting idea you have.
Just Google RAM Mounts and on their home page, in the center column, third post down, you'll see a link for Google Nexus 7 Mounts.
Click to expand...
Click to collapse
Yep, again those are just mounts, docks have built into them usb and audio out so you can charge and plug your device into your car.
arinoth said:
That's unfortunate that they didn't bother to launch something like this with the release, or close to it
Click to expand...
Click to collapse
Both Brodit and Herbert Richter have a long sad history of being up to six months behind the curve when it
comes to making new holders for the the best devices. When you already have a mount system it's annoying.
I hacked another HR holder to fit my HD2 back in Feb 2010.
Still using it with my HD2 now. Don't hold your breath for a dedicated dock.
Still umming and ahing over buying the S3 in black in October or waiting for the the upcoming 1.7Ghz HTC One X+ Plus
I contacted ProClip USA and they are going to make one, but there's no ETA yet.
Sent from my Nexus 7 using xda app-developers app
One would really think that some of the bigger tablet makers would give large heads up and almost demand that some car docks be available come their product launch time...
Brodit holder for the Google Nexus 7
chevvy said:
You can wait for brodit. No release date.
Click to expand...
Click to collapse
Brodit have released passive holder for the Nexus 7 so far, I'm guessing active holder won't be far behind.
Yep, that's what is called a Mount, as all it does is Mount the device.
A Dock as mentioned before has the connections built into it (usb/aux) so you just slide it in and you're all set to go, no connecting additional wires yourself.
ProClipUSA is shipping, ordered mine today
Custom fit (Brodit I imagine) and uses the USB for power (was hoping someone would use the pogo pins one of these days). Ordered mine today - it helps if you've already made the investment in their excellent car mount systems. I've got them in 3 vehicles with their Move Clip system - I love 'em. See ProclipUSA dot com for details, search under device mounts.
I have a universal phone cradle that somehow expands far enough for my Nexus 7... I'm not sure what brand it is, but I bought it at Radio Shack for about $15.
Johnny, that's a mount then NOT a dock.
Also a little steep for what ProClip is asking, you have to buy their mount + 100$ for the dock itself too
Im trying to mess with an old dock for my gs2. Ive took it apart and it has the perfect shape usb input for a custom dock.
What im thinking though would need some fiberglass work though.
A little harder but something like below with a galaxy 7
http://www.mp3car.com/worklogs/1507...-tablet-install-samsung-galaxy-tab-7-a-2.html
arinoth said:
Johnny, that's a mount then NOT a dock.
Also a little steep for what ProClip is asking, you have to buy their mount + 100$ for the dock itself too
Click to expand...
Click to collapse
Yes, it's a mount. I use a USB cigarette adapter which basically turns it into a charging cradle. You really don't need anything fancy or need to spend a bunch of money to get this functionality. Sure, it would be awesome if we could get an official car dock that utilizes the POGO pins...
Related
Brodit made a very nice solution for HTC HD2...Take a look:
http://www.brodit.com/?main=searchbrodit.jsp&search=hd2
Brodit makes one of the best car holders, so the ones interested
check the above link!
Cheers!
I know .
They're supposed to be in stock next week over here, so just a few more days and then i'll be able to navigate on the big ass screen
Luxury Problem..
Darn.. Luxury Problem...
having a HTC Shift mounted with a Brodit Holder already,
there's no place to attach a second car-specific mount.
Have been looking for a suction-cup model specificly for HD2 no luck yet.
If only HTC shift would have SD access, that would solve many problems
THanks for the heads-up on this one though !
I was looking at this, got the car mount already for my now redundant Nokia N800. But I want the extended battery when it gets released too, and I want to ensure it will fit before I got for this.
pixel said:
I was looking at this, got the car mount already for my now redundant Nokia N800. But I want the extended battery when it gets released too, and I want to ensure it will fit before I got for this.
Click to expand...
Click to collapse
I have a suggestion for you:
Buy a DC 12V to AC 220V for Car Power Outlet Adapter Inverter, and you can recharge hd2 all time while in the car without braking the battery!
Cheers!
pixel said:
I was looking at this, got the car mount already for my now redundant Nokia N800. But I want the extended battery when it gets released too, and I want to ensure it will fit before I got for this.
Click to expand...
Click to collapse
I've already got a car charger. that's not why I want the extended battery.
jimbo29 said:
I have a suggestion for you:
Buy a DC 12V to AC 220V for Car Power Outlet Adapter Inverter, and you can recharge hd2 all time while in the car without braking the battery!
Cheers!
Click to expand...
Click to collapse
Very effective... we transform 12VDC to 220VAC and then to 5VDC
Does anyone know if you can get a seperate usb cable for the streak yet?
I want a spare one so i can keep it in the car, or a longer one because i find the one that comes with the streak to be too short.
Anyway if anyone knows where to get one then could they let me know
Just had a thought while typing.. just buy a usb extension lead...off to buy one to see if it works.
yes Dell sell them on their website mate
Another option is a USB extention cable. I got a 6FT for like $10 at RadioShack. Works great for me, you can also buy the Dell car kit that will work as a backup USB cable.
Is there a way to buy a compatible one?
I live in italy and we can order only from dell.it that obviusly hasn't streak and accessories in their site....
enne91 said:
Is there a way to buy a compatible one?
I live in italy and we can order only from dell.it that obviusly hasn't streak and accessories in their site....
Click to expand...
Click to collapse
No one does one yet
ARHMogul said:
Another option is a USB extention cable. I got a 6FT for like $10 at RadioShack. Works great for me, you can also buy the Dell car kit that will work as a backup USB cable.
Click to expand...
Click to collapse
It'd have to be blooming long to use in the car, depending on the car journey
Sent from my Dell Streak using XDA App
Well it has recently been confirmed that the streaks connection port is a PDMI connection. The Slacker G2 radio also uses a PDMI but no one has tried its cable yet. Specs are one thing but fitting is another. (Think of it how the first iPhone had a 3.5mm headset jack but you had to buy the apple headphones that didn't an elbow and were narrow enough to fit in there.)
So if anybody has, or knows someone that has a Slacker G2, feel free to try the cable out and tell us all
Source:
http://www.streaksmart.com/2010/08/dell-streaks-proprietary-connector-is-actually-pdmi.html
Images that I can find for the slacker 2 radio charging lead seem to show a standard mini usb connector. Maybe the pdmi connector is data only?
can u use the ones on ebay?
Now i ordered another one from Dell site....
With only one cable, I finally ran out of patience and also constant carrying existing cable from place to place everytime I moved around.....
I have to have one near my bed for reading/charging thru the night....one in the car - which I will carry around to office as well...in the coming months hopefully the price will drop or there will be another source - till then this will do.
Troute said:
Images that I can find for the slacker 2 radio charging lead seem to show a standard mini usb connector. Maybe the pdmi connector is data only?
Click to expand...
Click to collapse
I guess it has both. check out this dock for the slacker g2... looks the same.. also looks like the ipod connector so don't know for sure till someone actually tests it out.
oh and here's one on amazon for 27.99
check out my review. just in case you were in the market for one. i highly recommend it
Samsung announced a few accessories when they launched their Galaxy Tab. I finally had the chance to pick up the Vehicle Mount (aka Car Dock) and take it for a spin. Check out my unboxing and initial impressions of this car dock.
http://www.youtube.com/watch?v=Gl2Ktb9Skac&feature=player_embedded
Summary:
When I bought the official HTC car dock for my Nexus One I thought to myself, “this is how a car dock should be!”. When I sold it, and started using the Galaxy Tab as my primary device, I new I had to find a car dock with the same precision and quality that the dock for my Nexus One had. I was quite surprised at the exceptional build quality of this car dock. The dock contours to meet the curvature of the Galaxy Tab and it just fits perfectly. The 3.5 mm headphone jack as well as the mic, volume rockers and power buttons are all accessible when docked. The bottom of the dock has the proprietary 30 pin connector that, not only helps secure the device but, allow you to charge it too. Being able to charge the device with the included car charger is a true bonus; one less thing you have to pay for. Once docked, the Tab will automatically go into car mode (not working in the video) and gives you access to quick functions like making a call or doing a quick search. This car dock retails for $69.99 but you can find it as cheap as $45.99 from mobilecityonline.com and its worth every penny. I must say, Samsung really came through with this product and I am excited to try out the rest of the accessories for the Galaxy Tab. Okay enough reading, GO BUY IT NOW! You won’t regret it.
Nice review, thanks! Going to order one ASAP.
I ordered one from the Amazon Marketplace for about 56 w/shipping. Some guy has them listed at full retail on eBay with or best offer. So I typed in a note and a link saying I'd do it for that same price if he could match, only response with no note back was a counter offer for $67... LOL. I guess it's not worth doing business with someone who doesn't even bother to notice what you wrote to them.
I just wish that it was possible to make these in a way that would allow a proper case to be used with the Tab. I have what I think is a very protective case, but because of it, this would not work for me.
Hey, is there enough room with the connector part slid back to insert another connector?
Reason I ask is that this thing would make a nice desktop dock when it wasn't in the car if you could still use the standard USB to 20 pin connector.
I guess you could use that USB to coax cable with the regular AC charger indoors to keep it powered up, but it would be nice to have USB connectivity as well (file transfers, flashing, etc).
Croak: Will have to check but by memory there is not enough room. I will try too look at it when I get back home tognight, the dock is in gf's car.
Really like this car dock by the way !
After looking at it there is def no place to put another connector there
so-6 said:
After looking at it there is def no place to put another connector there
Click to expand...
Click to collapse
Simple solution, just mount it the opposite direction it supposed to be mounted.
Sent from Samsung Galaxy Tab
specmac said:
Simple solution, just mount it the opposite direction it supposed to be mounted.
Sent from Samsung Galaxy Tab
Click to expand...
Click to collapse
/slaps forehead.
Been looking at the Nexus 10 but would like to find a powered car mount for it. I have found several universal mounts, but if I can find one that has the power connector built in so I don't have to also plug a cable in, that would be great. Has anyone seen something like this?
I doubt you'll find any. The market is just too small. The Nexus 10 market isn't that big.. The amount of people who want a powered car mount for the Nexus 10 is even smaller (substantially).
I'll be surprised if you find any mount that's even specific for the Nexus 10 (forget the powered part).
Here are the highest rated universal mounts I can find (you probably already saw these):
Arkon Bottom
Arkon Windshield
iTrek Windshield
Yeah. That's about what I expect but thought I'd throw out the question on the chance that someone might have seen something out there.
Sent from my EVO using Tapatalk 2
Im using arkon windshield,works great
smart dock knockoff.....may be worth a shot because the samsung one is too dang expensive....this one also looks like it will accept cases unlike the stock one....i may have to give it a shot after payday http://www.ebay.com/itm/SMART-MULTI...ories_MobilePhoneChargers&hash=item5657f3c0a2
Since in US it will still going to cost more than $50, I will wait for some reviews before getting one. Good find for sure
the official dock does accept some cases.
I've had it working with the official flip cover, and with the official protective cover +.
I had seen this exact dock from a different seller on ebay a couple of days ago. I was about to buy it, but then I noticed that it said in the fine print that the mhl and otg connections can't be used at the same time. I'll see if I can find the link again. Correct me if I'm wrong, but I assume that the oem dock can do both simultaneously?
Sent from my GT-N5100 using xda premium
Edit: this is the one I saw
http://pages.ebay.com/link/?nav=item.view&id=151084606670
The note at the bottom says only one function (mhl or otg) at a time.
drezman said:
I had seen this exact dock from a different seller on ebay a couple of days ago. I was about to buy it, but then I noticed that it said in the fine print that the mhl and otg connections can't be used at the same time. I'll see if I can find the link again. Correct me if I'm wrong, but I assume that the oem dock can do both simultaneously?
Sent from my GT-N5100 using xda premium
Edit: this is the one I saw
http://pages.ebay.com/link/?nav=item.view&id=151084606670
The note at the bottom says only one function (mhl or otg) at a time.
Click to expand...
Click to collapse
Good find..... Thanks!
dchtlh said:
smart dock knockoff.....may be worth a shot because the samsung one is too dang expensive....this one also looks like it will accept cases unlike the stock one....i may have to give it a shot after payday http://www.ebay.com/itm/SMART-MULTI...ories_MobilePhoneChargers&hash=item5657f3c0a2
Click to expand...
Click to collapse
Very good in hdmi e 80 inch projector ... :laugh: :good:
I got one from Amazon for 2t bucks. Compared it to a real one . It's got all most the same circuitry.
The chips that process the otg and charge curent signal are a lot different. But mine works it will charge while I runmy powered usb hub with my external harddrive. In the one I have you only get one otg option at a time. Like you can do one sd card or one usb thing or the hdmi out but not all at the same time so your going to need a usb hub thats got it's own power supply.
And like all Chinese knock offs you never know witch of there military owned slave labour operated plants actually built it . so there's a good chance you wind up with a better one.or one that isn't as good. Or maybe even one that doesn't work at all. They're all in the same case so its hit or miss.
My cheap knock off doc failed as off last night its no longer recognized as a doc. It shows up only the hdmi and charger.you can always charge and use hdmi out. But otg mod reverse the usb port so you can't charge.
Someone know a gadget that allows both usages? HDMI + USB at same time?
krazzykiller said:
I got one from Amazon for 2t bucks. Compared it to a real one . It's got all most the same circuitry.
The chips that process the otg and charge curent signal are a lot different. But mine works it will charge while I runmy powered usb hub with my external harddrive. In the one I have you only get one otg option at a time. Like you can do one sd card or one usb thing or the hdmi out but not all at the same time so your going to need a usb hub thats got it's own power supply.
And like all Chinese knock offs you never know witch of there military owned slave labour operated plants actually built it . so there's a good chance you wind up with a better one.or one that isn't as good. Or maybe even one that doesn't work at all. They're all in the same case so its hit or miss.
Click to expand...
Click to collapse
Newegg is carrying these now under the brand name "Baaqii".
It's $34 ($28 when on sale) but it also states, way down at the bottom, cannot do both OTG functions at same time.
joihan777 said:
Newegg is carrying these now under the brand name "Baaqii".
It's $34 ($28 when on sale) but it also states, way down at the bottom, cannot do both OTG functions at same time.
Click to expand...
Click to collapse
I'm thinking That to get otg charging theres got to be a switch in the software someplace that lets you turn offotg mod and turn in back on really fast. Like pules on off on off on off constantly in the kernel. But I'm also thinking that there might not be a switch like that in our phones.
I'm thinking that the chips in a smart doc probably do that. So that leaves us not much choice. We either got to buy a doc. Find that switch or
Get a wireless charger.
I found a port of the famous faux kernel. I tried it with the 5 dollar add on app. It had no effect on otg charging a note 2.
I'm thinking the best cheap solution is one of the inductive charger sets. Or possibly putting a 555 timing circuit into a usd cable.
But a $35 1 amp wireless universal charge plat and coil would probably be the easiest way to go.