I recently purchased a Poetic Slimbook case for my Nexus 7. I got it for $7 from Amazon. It's up to $10 now.
http://www.amazon.com/gp/product/B008IEGSGU/ref=oh_details_o01_s00_i00
I don't have my camera so I can't take pictures, but the pictures on Amazon do an excellent job of showing it off. The construction seems quite good. There's no cuts or anything in the leather and the stitching is neat. As you can imagine, it adds a bit of weight and some girth to the tablet. I consider that a good thing, because my Nexus 7 seems very well protected. It seems like it could survive a big fall, but I don't intend to test it.
The device goes in easily. You wouldn't think that a leather flap could keep it in, but it's not going anyplace. Nevertheless, it is easy to remove the device from the case if you want to. The lid is held shut by magnets on the top and bottom right. The "smart" cover also turns the device on and off as expected.
I think there's going to be a break-in period before I feel comfortable using it as a stand in the nearly upright position. It's pretty stiff and quite wobbly. It seems to work fine in the lower position (see the Amazon pictures for details/explanation). Since I didn't really intend to use it as a stand much, it's not a big deal for me.
All of the ports and buttons are easily accessible, although it is now a smidge more difficult to press the buttons. The speaker in the back is completely exposed. It does cover the bezel, but the good news is that the cover does not come right up to the edge of the screen itself. There is a little bit of bezel visible. That means that typing, etc., is not impeded in anyway. I like the bezel being covered because I know that there's no way my Nexus 7 would slip out.
On the inside of the cover there are little pockets to put things like business cards, tickets to sporting events, etc. There's a larger pocket behind those where you could put a check, cash, or something like that. There's also an elastic band that you can use to hold it without fear of dropping it. It works well enough, but the case itself isn't slippery, so I'm not sure how much I'd use it. It's nice to have in case I need it.
Overall I'm very pleased with the purchase. I was expecting much less for $7 with free shipping. I thought this might be a stop-gap case until something nicer comes out. As it is, I don't think I'll be in the market for anything else. Now I can stop being paranoid about my kids dropping something on the screen.
Hopefully you don't mind if I also post a review in your thread...
OK, I had originally thought I could go without a cover on the Nexus 7, until I found the Poetic Slimbook cover on Amazon for under $7 shipped. The case has not disappointed at all, but how can you for disappoint for $6.95? The smart cover capabilities work great and are a nice feature (see attached video for a short demonstration). The cover is held in place with magnets that fit firmly, but not too firm, you can hear the magnets snap in the video too. As revmra mentioned, the case adds some weight and girth to the tablet, but compared to previous tablet cases, one being an otterbox, it is really minimally invasive. The leather and stitching seem high quality, as well as the hand strap. All ports, buttons, speaker and camera are open and accessible. The volume rocker and power button are a little tougher to access since the side of the nexus has a curve to it, but with smart cover tech, I can't see myself using them that terrible much. The hand strap works well and the "kickstand" abilities of this case work better than my other leather case that I had for the Kindle Fire. I will echo the sentiment that the case appears to be able to withstand a fall and give protection to the N7. The edges have leather protruding outward, which should cushion the fall if it lands on a side or corner, and the case has a little padding if it falls flat on the front or back.
http://www.amazon.com/gp/product/B008IEGSGU/ref=ox_ya_os_product
All in all, it is a great value for $6.95 and probably still worth it for $12.95 which it has shot up to now. It will be good for me until something cool comes out, like a case with a backup battery, microSD slot and USB port or something like that...
Front
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back
Bottom
Power and volume
Microphone
Flat
Open
Hand strap
In hand with handstrap
Kickstand
Standing up
Video of smart cover capabilities http://www.youtube.com/watch?v=htR7vEz-cJQ
Are any of you finding the case to be a bit "stiff" when it's brand new?
I just got my case today, and I am finding 2 issues:
(1) the front cover does not sit flat when closed. Specifically, where there is a fold in the leather, it pops out ever so slightly.
(2) the stand function seems a bit flimsy to me. When I put it in on its stand (where the tab is at its most vertical position), I find that the tab isn't holding the flap very well, such that the tablet has a tendency to fall down on the screen.
Does it put tablet to sleep when the cover folded back?
JOLiu said:
Are any of you finding the case to be a bit "stiff" when it's brand new?
I just got my case today, and I am finding 2 issues:
(1) the front cover does not sit flat when closed. Specifically, where there is a fold in the leather, it pops out ever so slightly.
(2) the stand function seems a bit flimsy to me. When I put it in on its stand (where the tab is at its most vertical position), I find that the tab isn't holding the flap very well, such that the tablet has a tendency to fall down on the screen.
Click to expand...
Click to collapse
My cover sits flat, but the stand only seems to work in the nearly upright position, the back slips out in the lower position.
Sent from my Galaxy Nexus using xda premium
No magnet right?
pyroscott said:
Hopefully you don't mind if I also post a review in your thread...
Click to expand...
Click to collapse
Not at all! Thanks for adding the pictures!
JOLiu said:
Are any of you finding the case to be a bit "stiff" when it's brand new?
I just got my case today, and I am finding 2 issues:
(1) the front cover does not sit flat when closed. Specifically, where there is a fold in the leather, it pops out ever so slightly.
(2) the stand function seems a bit flimsy to me. When I put it in on its stand (where the tab is at its most vertical position), I find that the tab isn't holding the flap very well, such that the tablet has a tendency to fall down on the screen.
Click to expand...
Click to collapse
It's a little stiff, yes. The "fold" in the cover is so you can use it as a stand, so it won't lie completely flat. Not a huge deal and probably will get better with use. The tab on the back is VERY stiff on mine (which is probably good), but I think it will work better as a stand over time as well.
joedoe said:
Does it put tablet to sleep when the cover folded back?
Click to expand...
Click to collapse
I assume you mean when the cover is behind the device when you are holding it? No, it does not. The cover only puts it to sleep when you close it.
hullbay said:
No magnet right?
Click to expand...
Click to collapse
Did you read my review? There are magnets that hold the cover closed and a magnet to active the sleep/wake feature, all of which work very nicely.
thanks for the review but i cannot understand how anyone can use a case that covers up the bezel.
not only does it look ugly (IMO), it hinders functionality. it makes it so much more difficult to swipe in from the side.
blahblahyoutoo said:
thanks for the review but i cannot understand how anyone can use a case that covers up the bezel.
not only does it look ugly (IMO), it hinders functionality. it makes it so much more difficult to swipe in from the side.
Click to expand...
Click to collapse
Beauty is in the eye of the beholder (or beer-holder, as the case may be). That's why I made the specific point about the fact that the bezel is not 100% covered. Every part of the screen is available, plus a small amount of space on the side. I have not found functionality to be limited in any way, even though I was kind of expecting it. With the bezel mostly covered you know the device is not going anywhere.
I do know what you mean, though. I've got a case for my HTC Desire where the bezel is covered. I often found myself taking it out to use it because the case interfered. Having said that, that case saved my bacon more than once when I dropped my phone. Of course, the Nexus has a far more substantial bezel. While I heard some people complaining about that, here is one situation where it is a definite benefit.
I looked at some of the cases that just hold on at the corners. I think I'd be too paranoid to have one like that. To each, their own.
revmra said:
Beauty is in the eye of the beholder (or beer-holder, as the case may be). That's why I made the specific point about the fact that the bezel is not 100% covered. Every part of the screen is available, plus a small amount of space on the side. I have not found functionality to be limited in any way, even though I was kind of expecting it. With the bezel mostly covered you know the device is not going anywhere.
I do know what you mean, though. I've got a case for my HTC Desire where the bezel is covered. I often found myself taking it out to use it because the case interfered. Having said that, that case saved my bacon more than once when I dropped my phone. Of course, the Nexus has a far more substantial bezel. While I heard some people complaining about that, here is one situation where it is a definite benefit.
I looked at some of the cases that just hold on at the corners. I think I'd be too paranoid to have one like that. To each, their own.
Click to expand...
Click to collapse
Agreed that beauty is in the eye of the beholder.
I had an HTC Flyer w/ the Bluerex case. My brother also purchased this Nexus 7 and got the Poetic case that sort of reminds me of the Bluerex, where the tab is held by 6 tabs, but leaves the bezel completely accessible. I'd agree that the case my brother got is a bit more attractive, but I felt like the Slimbook offered a tad bit more protection since it covers the bezel. The design of the slimbook is adequate, in my eyes, plus at $7, I'm not complaining.
It's all a matter of opinion.
I got one similar to this http://www.amazon.com/gp/product/B008IEGS9W/ref=oh_details_o00_s00_i00 sorta looks the same. Everything the first two poster said is true. My n7 fits perfectly , the fit feel and overall structure of the case is by far more then what I expected for the price. Giving that it also has puts the n7 to sleep when close is just lovely. I have yet to test it out in stand-up mode seems a bit trouble some to do. Bit if that works well it will be great for gaming since it only stands up in landscape mode. Other then that for the price its a great case.. also fast shipping I ordered it this pass sunday and got it yesterday or today (did t check the mail) its winner in my books.
Also it was $9.95 at the time of purchase
I just got a Poetic Slimbook from Amazon. I paid a bit more than some of you guys, but it works a treat. No issues whatsoever with the magnet. It locks the screen when closing the front cover, and it's not so strong that it causes the Nexus 7 to lock when it's folded back.
I'm already making use of the stylus loop. The only thing I think could be better is the angle when it's set up as a stand. It's too high, Otherwise, I couldn't really ask for a better case. The holes are in the right places, it's got card pockets, and it has a stylus loop.
It would be nice if the card pockets featured an integrated bag of holding, but I suppose it's a bit much to ask for magic at that price.
I have it, and I'm really pleased.
Does anybody know how the auto screen lock actually works? It really intrigues me!
Enviat des del meu Nexus 7 usant Tapatalk 2
Related
Anybody try this case? Mine will be arriving shortly, so I'll give you my feedback soon. Clip option, belt loop option, 2 closure options (or none), several colors.
http://tuff-as-nuts.com/index.asp?PageAction=VIEWPROD&ProdID=564
This looks like what I've been waiting for..Let us know what you think of it when you get it.....thanks
interested in the case also, do hope to see some pics from you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Personally prefer the case in the pic i have provided, simple and suits me definitely.
I debated with myself for a while before going with the tab closure. I like the simplicity of having no closure at all, and that it would fold flat when the unit is out of the case. My prior cell phone case didn't have a flap and I never had a problem with it (didn't fall out). In the end I thought about the times when I'll use the main unit and leave the keyboard in the case, like when I'm using the camera. Figured to be safe I better get the tab.
Delivery is scheduled for next week, so I'll get some pics up when I get it.
Received today. 300% better than the piece of crap cases from that guy on ebay (like many others on here, mine broke in 2 days of light use and I dont have a refund yet). This case came to me in the US from New Zealand in 11 days, they claim 10 days minimum.
This case is built like a tank. I would trust it to hold my weight, if it had to. The clip is stainless steel, with a thin strip of leather glued to the outside for decoration. That may need better glue, but its a minor problem. The clip itself is securely embedded into the case and has a lip just below the clip (under the leather) to prevent the clip from slipping off a belt. The rest of the case is thick leather with a felt(?) lining.
Even without the closure it should hold the unit tight to the 90-degree position. I got the tab closure and it lets me hit the volume slider to mute the phone when its ringing plus would let me keep wired headphones plugged in while the tab is closed, although I only use BT headphones. I think the full closure option would be too much unless you walk in the rain or run with it. When empty it folds almost flat against my body even with the tab closure closed. That closes with velcro.
I get my first full day with it on my belt tomorrow, but so far it gets an A. Once I get the pics up on a server Ill post them.
how bout some pics with ur phone nicely secure in ur spanking brand new case
Like I said in my last post, once I got the pics up somewhere I would post them. Here you go:
Sorry, no pics with the whole phone in there - its the chicken-and-the-egg dilema. My wife had our real camera last night, so I was using the one on the phone.
Oh, and before someone asks, yes that's a D-ring at the top of the clip. You can use it with a clip-on shoulder strap (the one they offer is too expensive) or slip the strap of a larger bag through it.
This case would seem to be 'THE SOLUTION' for all of us. I have the tried the cheap case with the post and belt clip. The clip that came with it was broken from the get-go and I found a good substitute. BUT, I have seen a number of posts saying the post has broken so I will junk this case. I had another case that had belt loops which would hold the x7501 but the leather just tore and it is in the waste basket also.
Piel Frama has made a case but it is even more expensive than this one, has no belt attachment and is very similar to the one that comes with the Advantage.
So, I have a question! I assume that the X7501 and the HTC case would not fit in the pouch of the Tough-as-nuts case? If not, do you think it would be adventageous if the case were made bigger to accomodate it? I am not comfortable holding this device without a case around it (old hands).
Brad Miter
The cheap ebay case I bought had both problems you mention - first the clip broke after 2 days, then the post came unglued inside the round piece of leather. I'm glad I noticed the glue problem - five minutes of walking around and the whole thing would have dropped to the floor. I pulled the post out of the round piece without much effort once the glue came undone.
Personally I do not like the method the original case, the cheap ebay case, and so many others use to hold the 2 parts of the Athena/Advantage in place. Those chunky plastic clips are just wear points as the 2 parts of the Athena get mashed together while you walk around. They should have built mounting slots/holes into the Athena's metal case to make car mounts and protective cases easier and safer. I also don't like the metal slab used to mount the keyboard because of its weight. Between the large plastic slab in the top of the case, the plastic clips, and the large metal slab in the bottom of the case, the original case (and many of the after-market solutions) is very heavy. The Tough-as-Nuts case is noticeably lighter in the hand even with its solid metal clip and D-ring. There's just so much metal and plastic in the original case.
I do like how much more protected the device is inside the original case while in use, and it keeps it from tipping over when you press on the screen. So I tried putting the whole thing into my new case, but there's not quite enough room. I think the thickness was OK, and the length would be fine (my closure strap is very long) but the width didn't have enough give to allow the Athena+case. I probably wouldn't have done that all the time but the option would have been nice if I knew I would be using it where it might get dropped or bumped.
My reaction now after several days on my hip: The new case feels much more secure than the cheapo ebay one. I always knew the Athena was there, usually pulling heavily on my belt in that other case. It also stuck out a good half-inch from my body so it had some leverage with that weight, too. The new case is snug against me, with just enough room on the clip that when I sit down it will tilt slightly and not get in the way. I truly forget its there now, sitting or walking around. I found it was not comfortable clipped all the way over the edge of my jeans, since the bottom edge of the clip sticks out a bit. My guess is that's to force the clip to stay closed as it lays against you. Unfortunately it digs into you when the clip is inside the pants, but very comfortable when kept on the belt. This case does not give you a window for the "subdisplay". However, the subdisplay is implemented very poorly on the Athena. The slightest bit out-of-alignment and the subdisplay turns off, as reported by several people on this forum and now me. So even with a window on the case its still mostly useless (which I found the few days I used that ebay case which does have a window). If you are looking for a case with a window, forget it. Since I use the Jabra BT8010 which has a display that deficiency is mostly a non-issue for me.
edit: And that red tag is probably going to get cut off some time soon, to me its annoying having this little red flag down there sticking out and saying "look at me".
Thanks for the additional feedback. I think I'll write Nutshell and see if they would consider making just a bit larger by say, 1/4" all dimensions. Do you think that would too much slop when not using the HTC case?
Brad
Probably. It goes in pretty easy right now, and slips right out if you tip it past horizontal. But if you get one of the closures it wont be an issue.
miterb said:
Thanks for the additional feedback. I think I'll write Nutshell and see if they would consider making just a bit larger by say, 1/4" all dimensions. Do you think that would too much slop when not using the HTC case?
Brad
Click to expand...
Click to collapse
I now have a Nutshell on order. For an upcharge they will make it 1/4" wider and 1/4" deep so I should be able to leave the Advantage in the HTC case for safety when removed from the pouch. I'm also getting the Tab, Belt Clip and the Shoulder Strap. Hope it gets here before Christmas. I'll report back when I have it!
Brad
So far I love mine, I hope you do, too. I still forget its on me at times, although I doubt youll have those moments with the weight of both cases on your belt.
techntrek said:
So far I love mine, I hope you do, too. I still forget its on me at times, although I doubt youll have those moments with the weight of both cases on your belt.
Click to expand...
Click to collapse
I ordered the shoulder strap too as I find it really too heavy when carried in a pants pocket.
Brad
I agree it feels unwieldy/heavy when its in a pocket, but on my belt on my hip its very comfortable.
How much extra was it for the extra .25 in on all sides?
$20. If it works it will be worth it.
Brad
I tested this case for Gear Diary. You can read the review and see pics here.
My only complaint relates the the Invisible Shield I also installed on the Advantage. Pulling it in and out of the case has lifted the film on the housing at some edges.
An update on this case. After several months of daily use, its holding up well. It has a few minor scuff marks on the front from brushing against hard chair arms, but nothing obvious unless you view it with light reflecting off the surface. I would expect the same or much worse from cheaper cases. Its still solid as a rock - the velcro is still normal and the belt clip won't move at all. It supports the unit so well that I frequently forget I'm carrying it. A purchase I'm happy with. Too bad they didn't supply a case like this in the original box.
I'm not sure what the proper terminology is for identifying these cases, but I'm comparing the thicker leather cases that wrap around the tablet versus the ones with 6 prongs that kind of latch onto the tablets edges to hold it in place.
This style:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vs this style:
I have one of each right now. I have the i-Blason case that wraps around the entire tablet's front side, and I also have the Blurex case which has the 6 prongs to hold onto the tablet. I'm a little indifferent on which one to use full time, as silly as that sounds. I figured I'd ask here to get your opinions and see what you guys think.
I personally love both cases for opposing reasons. The Blurex case has a latch on it, which on one hand I like because I feel if I would drop the tablet, there's no chance of the front flap coming open during the tumble. On the other hand, I use my tablet SO frequently at work, I'm continually opening and closing it, which makes me wonder if I'll see any wear signs from the clip on the side continually sliding against the tablet to form the lock. On the one hand, it's slim enough I can fit into my back pocket even with the case, but this isn't something I like to do since I fear that I may forget about it and inadvertently sit on it.
As far as the i-Blason case goes (I have this one here), I like it just as much, but there again for different reasons. I personally couldn't stand the vertical/horizontal features of it, because the entire thing is held on by velcro. Really? Velcro? I ended dumping some epoxy into it which permanently joined the two parts. As a result, it's a horizontal only type of case, which I prefer anyway. I'm not overly fond of the leather that wraps around the front of the actual tablet, however it's cut neatly enough that nothing is overtop of the actual display. Likewise, the front flap does not have a clip on it. Instead, the magnets used to wake up/sleep the device are actually quite strong and hold the front flap in place securely (unlike Blurex's equivalent case located here which has the absolute weakest magnets I've ever seen). This case does not fit into my pocket like the other one and is indeed a bit thicker. That said, considering how much I use it at work, sometimes it makes me feel more secure with it.
Pros and cons in each scenario. That said, I'm curious what you guys prefer. Any takers?
I absolutely hate cases that cover the bezel. I do like those blurex style cases as I've used them before on a few different tablets. However, they are pretty thick (seems to double the thickness of a nexus), and the clasp sticks out when you fold it back.
I think I'm with a number of other users here when I say that I have not found a case that I want for my Nexus. The poetic portfolio case that is being discussed in another thread is close to what I want, but I think lacking in the quality that I'm looking for. I'm really surprised we haven't seen more high end cases like this yet.
I like the case I have a lot. Its a similar case to the one you like.
Here's my review.
http://forum.xda-developers.com/showthread.php?t=1892017
That is my same fear that if I buy a prong type that it will leave a scuff mark or such on the tablet
spooke said:
I like the case I have a lot. Its a similar case to the one you like.
Here's my review.
http://forum.xda-developers.com/showthread.php?t=1892017
Click to expand...
Click to collapse
Appreciate the suggestion, but I'm not seeing any black ones like that from this seller on Ebay.
I'd *really* like to opt for Amazon because I'm taking a trip soon where I'm leaving Tuesday night. At least with Amazon I have greater control over shipping speed, whereas Ebay listings are often base line ground shipping.
EDIT - This one sure caught my eye...
http://www.amazon.com/Thankscase-Ro...d=1348248460&sr=1-41&keywords=nexus+7+PU+case
I really wish I could find this exact case... but without the 360 degree rotating thing... Then again maybe the 360 degree thing wouldn't be that bad?
Love the smart cover. The face of the tablet is mostly uncovered and it's held in with a plastic mold. Of course, the sleep/wake feature is awesome as well. I don't think I'll ever use another case. The leather folio I used before was junk; it says it was for Nexus 7 but it was too big and the tablet shifted around all the time.
Sent from my XT910 using xda app-developers app
Fracta1 said:
Love the smart cover. The face of the tablet is mostly uncovered and it's held in with a plastic mold. Of course, the sleep/wake feature is awesome as well. I don't think I'll ever use another case. The leather folio I used before was junk; it says it was for Nexus 7 but it was too big and the tablet shifted around all the time.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Where did you end up snagging that? Ebay?
I'd love to get one and have it for when I leave on Tuesday. I'd prefer to get it on Amazon where I know I'll get fast shipping if I pay the extra. Some items I've bought on Ebay from China (like this case I'm seeing) took up to a month. Yeah.
JaSauders said:
Where did you end up snagging that? Ebay?
I'd love to get one and have it for when I leave on Tuesday. I'd prefer to get it on Amazon where I know I'll get fast shipping if I pay the extra. Some items I've bought on Ebay from China (like this case I'm seeing) took up to a month. Yeah.
Click to expand...
Click to collapse
Yeah, I got it on eBay for just under 8 dollars. It shipped from California in about a week's time. I haven't checked Amazon, so I couldn't say for sure if they have them too...
And yes, buying from China is not fun
Neither, sorry. They're bulky and gross looking. I think the dodo case and portenzo cases can't be beat, style wise.
Sent from my LG-P999 using xda app-developers app
I also have both style cases and I prefer the blurex-style one because it doesn't prevent me from using Chrome's tab switching gesture.
Sent from my Nexus 7 using Tapatalk 2
Unless there's a better + quicker option on the table, I might go after this case here:
http://www.amazon.com/Worldshopping...sories/dp/B008RVE54G/ref=cm_cr_pr_product_top
I'm not sure how much I'd use the vertical aspect of the case, but it seems like the platform would be wide enough to keep it stable. We'll have to see, though.
EDIT - Figured, why not. Ordered this case above. Guaranteed shipping by Monday. I'll report back when I get it.
I purchased the MoKo(TM) 360 Degrees Rotating Case , and it has been perfect for me. The fact that it clips on all sides both when open and close makes it feel alot more secure than other flip-cover cases; and you cant argue with the rotation capability. Also, it makes the tablet feel much more substantial without making it feel bulky or heavy which I am definitely a fan of. My friend bought the Blurex Ultra-Slim Case for Google Nexus 7, but not only is half of the tablet free when it is open, but it also has fewer prop-angles and the padding does not feel as robust.
I have the blaston one and it's a really nice case but I still don't like have the bezel covered and I don't like the back flap. I want a different one. Who wants to trade!
Sent from my Nexus 7 using xda app-developers app
Folio Case!
I like this one! (Is quite similar)
forum.xda-developers.com/showthread.php?t=1838946 (Multi-Angle Leather Folio Case from Anker [Review])
plus.google.com/photos/104293615707172014306/albums/5777724988825050929?authkey=CIzz9oGX49azaA
mrclnsf said:
I like this one! (Is quite similar)
forum.xda-developers.com/showthread.php?t=1838946 (Multi-Angle Leather Folio Case from Anker [Review])
plus.google.com/photos/104293615707172014306/albums/5777724988825050929?authkey=CIzz9oGX49azaA
Click to expand...
Click to collapse
The one I just nabbed looks very similar, with the most notable difference being no bezel coverage. If you like your case I'm sure I'll have a similar opinion of mine.
The only thing I was semi concerned about was how flat it would lay when closed up. But then I began to wonder, why does it matter? If it's closed, it's not in use.
I am trying to decide between the:
Roo Case http://www.amazon.com/gp/product/B008F05Q2E/ref=ox_sc_sfl_title_1?ie=UTF8&smid=A2IHZFOHOQ0WG8
or
Poetic Slimbook (with handstrap) http://www.amazon.com/gp/product/B008IEGSGU/ref=ox_sc_act_title_1?ie=UTF8&smid=A29LLD0WGS56WE
What you guys think?
Guys, don't repeat my mistake. DO NOT order that "Worldshoppingwhatever" case that I linked above, found here:
http://www.amazon.com/Worldshopping...sories/dp/B008RVE54G/ref=cm_cr_pr_product_top
I wrote a review about it. I'll paste that review contents here even though it's available on Amazon.
I'm going to try really hard to pull what positives I can out of this review, but beware, there's hardly anything positive to say about it.
First, let's start with the overall feel of the product. The exterior feel of it is quite nice. Nothing to be overly excited about, but it feels decent, moderately durable, jet black color while presenting very little shine. It has a leather-like surface to it, which is quite nice. If you open it up you're presented with a plastic mold that your Nexus 7 attaches to. My Nexus 7 attached to it perfectly and was flush at all corners. I thought it'd be cool to have the swivel 360 feature as this case has, but I didn't expect it to be this terrible. The plastic mold spins freely. Literally. In fact it has extra wobble in it as you spin it, allowing you to spin the mold like a kid's pinwheel. This makes it undeniably frustrating to use when you have the front folded back and you're trying to hold the device in one hand while use the touch screen with your other, as the tablet will continuously shimmy left and right. If you're going to have a swivel function, at least make it so it provides some degree of resistance so it's not THIS movable.
At this point I realized that the "fold" (aka hinge) of this case seemed extremely flimsy. It has absolutely no strength whatsoever, which is weird because the front has some degree of a more durable "cardboard-like" backing to it, but the hinge itself is just completely loose. It feels as pliable as a microfiber cloth - I'm not kidding. This, of course, presented me with some concern about how well it would hold up my tablet when propped up. I'm here to tell you... it sucks. I'm not exaggerating. It won't even prop up my tablet in the majority of scenarios I tried. There's two notches in the front flap of the case which allows the bottom to be cradled and therefore prop it upright. I'll identify them by calling them notch A (closest to the hinge) and notch B (closest to the edge).
Notch A - Horizontal - Tablet stands upright. Hooray!
Notch A - Veritcal - Falls without hesitation. Fail.
Notch B - Horizontal - Falls without hesitation. Fail.
Notch B - Veritcal - Falls without hesitation. Fail.
I can only attribute this to the unbelievably soft/weak material. It just flat out doesn't work. The lack of strength leaves something to be desired. I admittedly got a little excited when I first opened the item because the exterior finish isn't really bad. In fact it's quite decent for a low end product. That alone is the only semi positive thing I was able to draw out of this product. I'm exceptionally disappointed and find the product a complete joke. I would expect (and have first hand seen) better quality tablet cases out of Five Below and other various "everything's 5 bucks" general stores. 15 bucks online? Including another 7-15 to ship this piece of garbage? Are you absolutely insane?
I have to admit, just prior to purchasing this tablet I couldn't help but to think that "Joanna" and "Ashley" (the only other two posted reviews of this product at the time of my purchase) were fake reviews, considering they both haven't posted a review before and both uploaded their review on the exact same date. Seems all too perfect, eh? Well, evidently it was. I'd like to highlight a few key points as these undoubtedly fake reviewers point out:
Joanna claims that: When open, the stand capabilities fully support the weight of the N7 and it is at a pretty good angle for viewing.
No. It doesn't. I can't even begin to express how much this statement enrages me because it is absolutely false. This thing can hardly withstand the weight of my cell phone, let alone my tablet.
Meanwhile, Ashley claims that: I am very accustomed to recognizing build quality, and I have a high level of technology expertise. I have already recommended this case to numerous people, including coworkers that have also purchased a new google nexus 7.
WHAT! You're accustomed to recognizing build quality and think that this thing in any way shape or form demonstrates even the most minuscule degree of build quality?
Look elsewhere. Please. I beg you. I cannot stress this enough. Buy anything else. Really. Anything. i-Blason, Blurex, Moko, rooCase, I've used countless cases - close your eyes, take your pick, you'll be happier off with anything else.
Using a case so terrible like this just makes me realize how completely flipping awesome my Blurex slim fit case is.
I just got the Asus travel cover and I must say I like it. Fits really well. The texture is nice. I know with use it can only get better. I ordered the poetic slim book. Just waiting for it to arrive. But until then this will do.
Sent from rooted Nexus 7
I have the Blurex Slim case and I like it. It's not that bulky.
So I recently recieved my bobjGear case. These are available from Amazon or bobjGear directly. US customers like myself, who don't want to order from Amazon can still order directly from him too. bobjGear shipped my case out promptly, and priority mail.
Now I only have the factory "Google" or Asus case to compare this too. As you can see the bobjGear case is a thicker. It does have a tacky rubbery feel, that helps you hold onto it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notice the hole on the lower-mid left side of the top of the case. They have directed one of the microphones forward. The other is directed pretty much straight out the bottom.
The buttons on the bobjGear case you definitely won't hit on accident. You do really have to push them to operate them.
The ridge around the case pretty much creates a giant bumper all the way around around the tablet. As you can see by the volume buttons above the bumper is the thinnest on the back, but it's still much more protection compared to the stock case.
Pros:
-More padding around the tablet, hopefully protects it from any accidents.
-Gives the tablet a bit more mass, which makes it feel better in my hands.
-The silicone adds some grip, and feels good in my hands.
-Price, at $20 it's not the cheapest case out there, but definitely not the most exspensive.
-Many colors available.
Cons:
-No cover or protection for the screen. (While this makes it easier to use, I do like the flip cover when I just throw the tablet into a bag, I'll be using a screen protector now.)
-Does add some size to the tablet over the thin factory case.
-Between the extra size of the case, and the grip of the silicone, means it doesn't just slip into my back pocket anymore.
-The extra grip does attract dust and dirt
- ??
Other Thoughts:
I would actually like to see a bit more of a ridge around the tablet on the backside. Most of the thicker material is around the edges and the front side, the back is "thin" compared to the front. While I'm sure this is a compromise as users with smaller hands wouldn't want the case even thicker. So far everyone I've shown the case too though, has thought it really made it feel nice to hold.
My other borderline complaint, is the buttons are almost hard to press. While you definitely won't hit them on accident, now you definitely have to mean to push them.
It would be nice if a thin piece of plastic (similar to what the Otterbox cases have) could be added to protect the screen. While it maybe hard to scratch the glass on the Nexus, I'd still feel better with an extra layer of protection for when I decided to put it in a bag, or throw it in the car seat with other stuff.
Final Word:
Overall I would definitely recommend this case, if nothing else just for the feel alone. It makes the tablet much more comfortable in your hands. It also makes it easier to hold onto. Not to mention, if (when) I drop my tablet I'd much rather it fall in the bobjGear case than the Asus factory case.
Very nice review! Great to see the different takes and types of cases that I haven't seen first hand yet.
That top part makes it look like a pillow! lol. Great for the kiddies so not to worry too much from accidental drops. Hey I dropped mine twice already lol, I had the treegloo case on at both times. Came unscathed, well the N7 did, the treegloo had some indentations, but you can hardly tell they are there.
Anywhoo...great review .
Great review.
Great review .. i have the pink one.
I think its great as it is with the exception of the buttons. They are kinda hard for me to push. I disagree with the screen needed a plastic cover. that is just a false sense of security.. if you hit the screen center you will break it even if something was over it that would let touch work.. One more thing . Wash it in warm water with dish detergent in sink will stop it from being sticky and still give you great grip.
I have the amzer so called impact resistant case. near same price but much less protection. The rubber ring around the screen feels odd in my hand.
erica_renee said:
I disagree with the screen needed a plastic cover. that is just a false sense of security..
Click to expand...
Click to collapse
It's not really to protect against breakage, it's more to protect the screen from scratches and chemicals. It's not a huge deal, as I'll just use a screen protector, but an option like this would be nice.
erica_renee said:
Wash it in warm water with dish detergent in sink will stop it from being sticky and still give you great grip.
Click to expand...
Click to collapse
Thanks for the tip, going to go wash it now!
Nice review. I had been eyeing the BobJ case, and may have gotten it had it been out while I was case shopping. But, it still wasn't due for a few weeks.
I went with the Portenzo case instead. But, the BobJ ruggedness was definitely an appealing close second. Looks good!
[Sent from my Nexie7. Pardon errors.]
Thanks for the review, OhioYJ.
Judging by the photos only I do wish the ridge wasn't as pronounced at the top.
Thanks OhioYJ for the review this is perfect timing just got a Nexus 7 yesterday for my daughter and was already looking at this case, going for the pink one.
And thanks erica_renee for the washing tip will try that as well!
ray4jc said:
Thanks OhioYJ for the review this is perfect timing just got a Nexus 7 yesterday for my daughter and was already looking at this case, going for the pink one.
And thanks erica_renee for the washing tip will try that as well!
Click to expand...
Click to collapse
If you have not bought it .. The colors of the cases are not exact to what he has on his site .. I got the (berry something color) it is near HOT PINK.. Had i know it was so bright i would have got green or orange.. However i am very light skin and blonde hair. So most of my cloths and so on fit well with the color.If she has darker hair The case could clash with most darker hair women are not so much into pinkish pastel colors.
Sorry OP if this is off topic. But it is about the case and its colors are off from the website. but then again it could be my monitor..
erica_renee said:
If you have not bought it .. The colors of the cases are not exact to what he has on his site .. I got the (berry something color) it is near HOT PINK.. Had i know it was so bright i would have got green or orange.. However i am very light skin and blonde hair. So most of my cloths and so on fit well with the color.If she has darker hair The case could clash with most darker hair women are not so much into pinkish pastel colors.
Sorry OP if this is off topic. But it is about the case and its colors are off from the website. but then again it could be my monitor..
Click to expand...
Click to collapse
She is 5 I think Hot Pink would be a bonus for her! Thanks for the info however.
OhioYJ thanks for the review.
Can OhioYJ or anyone with a more experience, now, tell me how it is standing up to normal use? How about any drops? Or kids using it?
Can't speak for the N7, because the case has only been on it since the release, but I've got 3 of the BobjGear cases for my Toshiba Thrive (a big and heavy device) and his cases have kept it safe and disaster-free for the last 9-10 months. Even in 'little' hands.
I find the wide round edge makes the device much easier and comfy to hold on to while reading and so on .. It does add some weight to it but its not that bad.You just have a better sense of security for the device in your hand with this case..I have tried several others and this one is by far the best . For kids and those with small hands this will also make them less likely to drop the device.Its Not as soft of a rubber as you would think its quite dense and very nice quality material.. The only down side i could say it pushing the buttons are sometimes kinda hard. Or i guess harder to push.. This is the only thing the young children could have a issue with or might have to learn to do...
I WOULD SAY Buy it . IF you do not like send it back...
Good Luck...
I really like the design of this case. Only problem is I use my alarm clock on the N7 so I need something that docks
portage said:
I really like the design of this case. Only problem is I use my alarm clock on the N7 so I need something that docks
Click to expand...
Click to collapse
there is a stand for the case on the bobjgear website.. But yea with most after market especially a case made to protect the device a standard dock would NOT work.
there are alternatives on amazon that will accomidate the case.. I just have not really looked...
I'm very happy my new black Bobj case so far.
I share my tablet with my little son (he loves doing puzzles on it).
He's good with stuff and hasn't dropped it but now with the case I'm worry-free :good: Also no harmful chemicals thanks to the food-grade silicone.
The case goes on and off easy enough and it's also easy to clean (doesn't attract dirt as much as i thought it would anyway).
It offers a good grip and I think it provides more protection than i.e. the Amzer skin case because it's so thick.
The sound/power button are covered which makes them a bit harder to push. No more pushing by accident I guess
I'm certainly not getting something expensive like an Otterbox for a budget tablet, insane prices.. I just need something easy and simple anyway, I'm not going camping with the tablet.
As mentioned, you can't use a dock with it I think (unless you take it out everytime or customize it yourself) but I don't want one anyway.
I couldn't order it from Amazon.com because I'm in Canada, so I simply ordered it through the bobjgear website. Best customer service, before and after I ordered :good:
My wife is getting one too now for her Nexus 7 (she's such a copy cat).
I bet she got her nexus first. Tell her the pink one is very VERY Bright..I love mine because i can hold my tablet better with this case.i have a cheap book type case with the cheap band corner straps i put it in when its in my purse to protect the screen .. aweseome protection and not ugly like the gum drop..
bananenstaude85 said:
I'm very happy my new black Bobj case so far.
I share my tablet with my little son (he loves doing puzzles on it).
He's good with stuff and hasn't dropped it but now with the case I'm worry-free :good: Also no harmful chemicals thanks to the food-grade silicone.
The case goes on and off easy enough and it's also easy to clean (doesn't attract dirt as much as i thought it would anyway).
It offers a good grip and I think it provides more protection than i.e. the Amzer skin case because it's so thick.
The sound/power button are covered which makes them a bit harder to push. No more pushing by accident I guess
I'm certainly not getting something expensive like an Otterbox for a budget tablet, insane prices.. I just need something easy and simple anyway, I'm not going camping with the tablet.
As mentioned, you can't use a dock with it I think (unless you take it out everytime or customize it yourself) but I don't want one anyway.
I couldn't order it from Amazon.com because I'm in Canada, so I simply ordered it through the bobjgear website. Best customer service, before and after I ordered :good:
My wife is getting one too now for her Nexus 7 (she's such a copy cat).
Click to expand...
Click to collapse
It may be years later, but I do so appreciate this kind of review as BobJGear is still going strong. I have 4 BobJ cases:
Gotcha Green
Outrageous Orange
Batfish Blue
Bold Black
The green is a very bright green and the blue is very loud. The orange and black are more for business, as the colours are more muted.
I did not get from the Amazon store as they would not ship to South Africa. On the other hand, BobJGear China had no hassles and I ordered through Aliexpress.com.
Still one of the best cases around and well worth spending the money.
If anyone has a hard time viewing the photos, please let me know as they are hosted on another forum.
Seidio Active Case with Multi-Purpose Cover for the Nexus 7.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Packaging:
No need to dwell on this one. Package arrived with no issues. I opened the Fed-Ex box and found the case secure within a plastic packaging. No annoying sealed edges to cut or deal with.
What's included:
Inside the box are a few items:
A silicone flexible "inner" piece
A soft-touch hard "outer/skeleton" piece
A soft-touch hard Multi-Purpose Cover
There are also instructions for those who have a difficult time with these kinds of things
Instructions:
There are instructions (as is normal with Seidio products) in the shape of the device. The directions fit inside the case in an attempt to replicate the product. No special tools or triple jointed body parts needed!
Next there are also instruction stickers attached to the soft-touch hard "outer" shell and the Multi-Purpose Cover. Personally I saw these as overkill but you never know when someone may need it or can't figure it out. Fortunately these additional directions are just pictures. These secondary directions are pretty well stuck on there and are not made to peel off (in case anyone wants to know). They frankly annoyed me for the first day. Now I don't even notice them.
Quality:
A+!!! Seidio nailed it with this one! Everything lines up great. Headphone jack, speaker, microphone(s) and charging port all have ample clearance. The power buttons and volume keys also line up perfectly with the physical keys that say hidden underneath the case.
Silicone Flexible Inner Piece:
A+ As mentioned above, EVERYTHING lines up perfect. Nothing to note here. Easy as pie to put on. Easy as pie to take off.
Soft-Touch Hard Outer Shell:
A+ A lot of reviews refer to this piece as the Skeleton as it is what gives the case it's strength. To be honest, that makes a lot of sense. This piece is what makes the case useful and sets it apart from the standard case.
This Outer Shell/Skeleton is a hard plastic that features Seidio's signature soft touch. It's not slick at all. This shell literally "clips" right onto the the silicone piece and is a TIGHT fit. It's not easy to remove (at all) so you don't have to worry about it falling off. It's there and it's on there TIGHT!
When you order a different color case, this is the piece that varies, the inner silicone and multi-purpose cover will remain the same.
***As is, Seidio sells JUST the combination mentioned above but they also sell a combination that includes the Multi-Purpose Cover (mentioned below)***
Multi-Purpose Cover:
A- Let me start by saying this. I have the book-style cover on my kindle. It's great for books and if that's your preference. Personally, I wasn't about to put one on my Nexus 7. Personal preference.
That being said, the idea behind this Multi-Purpose Cover is what sold me and it, mostly, does the same things that all those popular iProduct and Nexus/Kindle cases do. In my opinion, this blows them out of the water. Here is why: every case I've seen has a landscape (and occasionally portrait) option. Each of those cases usually can sit at 2 or 3 angles. If you don't want the front cover of the book-style your only option is to take it out of the case or use the funky-elastic straps to snag the front of the Nexus and hold in it place. I refused to do this because I feel that this looks TERRIBLE!
Enter the Multi-Purpose Cover! There are indents on the corners of the Outer Shell/Skeleton that line up in all directions with the cover. Basically it clips on and stays on (for as long as you want it to) whenever you want to store the cover on the front or back of the device. I was easily able to pick up the case and shake it around with the Nexus attached without fear of it falling.
If you want it on the back of the case, you can put it on. If you don't want it on the back of the case, you can take it off. If you are transporting the Nexus, you can put it on. If you aren't and are just using it around the house, you can take it off. There is plenty of room between the cover and the screen of the Nexus 7 when in place over the screen to help prevent damage to our fragile toys.
If you want to use it as a stand, you can! There is a piece built into the cover that folds out and acts as a stand. Not only that, but there are 10 angles you can choose from to use the cover as a stand. I must say that this piece feels a bit clumsy and I am curious to see how this holds up long term.
When using the cover as a stand there are long rubber feet that help prevent the the stand from sliding across a desk or table.
I only have two dislikes about the cover which is what gives the cover itself a A- rating. First, when in landscape mode it feels like there is a bit of wiggle (front and back) where the Nexus sits in the stand. It doesn't seem to affect anything but it's worth noting. That being said, it didn't stop me from using it. It works great when working on projects in bed, etc. Second, there isn't a viable option to use the stand in portrait mode (if I ever wanted to) as the Nexus 7 would only be resting on one tab of the cover. I feel that this is an oversight that could have been corrected with perhaps a longer middle tab. Perhaps it'll be worked on in future versions. Either way, as long as you know these two things going in, you'll be happy.
It's also worth noting that having the Cover on the Nexus 7 does not seem to effect the sound quality of music/video.
Overall:
A In my opinion this is the best product I've ever seen Seidio produce. It's simple and to the point. It protects our beloved Nexus and looks good doing so. It withstands the pressures that the day to day activities can throw at it.
We've all seen the horror stories of the glass on the Nexus 7 breaking too easily. This was one of my MAIN reasons for wanting a case for it. I can confidently say that this case has alleviated those concerns. I've had the Nexus in the outer pockets of my luggage and in my gym bag and have put them through their standard uses and the case (and more importantly the Nexus) have come out completely unscathed!
Is it worth $34 bucks ($44 with the cover) when an ebay case can be had for 1/4 to 1/2 the price? I would most definitely say YES!
Want one? You can find them at Seidio's website by clicking HERE!
If anyone has any questions about the case or would like additional photos, be sure to let me know. I'm in the process of moving so responses may be delayed. :good:
Fantastic review. Thanks for the great pics too. I was wondering if you could tell me how thick the case and cover are together? I keep my nexus in my flight suit leg pocket and need the cover. I have a seidio active for my phone and love it. I am just wondering if it is to thick. Thanks!
Sent from my Nexus 7 using xda app-developers app
Uh60m Pilot said:
Fantastic review. Thanks for the great pics too. I was wondering if you could tell me how thick the case and cover are together? I keep my nexus in my flight suit leg pocket and need the cover. I have a seidio active for my phone and love it. I am just wondering if it is to thick. Thanks!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It appears to be right about 1" from front to back with the cover. About 3/4" from each edge it drops to about 3/4" from front to back.
kelmar13 said:
It appears to be right about 1" from front to back with the cover. About 3/4" from each edge it drops to about 3/4" from front to back.
Click to expand...
Click to collapse
I was going to say that's too big to fit in my cargo pocket but the case I'm currently using is an easy 3/4". What is the overall length with the cover on? that's crucial.
Troute said:
I was going to say that's too big to fit in my cargo pocket but the case I'm currently using is an easy 3/4". What is the overall length with the cover on? that's crucial.
Click to expand...
Click to collapse
Just a hair over 8" at the corners (the cover only grabs the corners). 8" at the center.
Sent from my DROID RAZR using xda app-developers app
Thanks for that, a bit too long for me to be able to close the pocket flap
Side shot that shows the size of the cover on the device (and more importantly the amount of space between the screen and the cover.
When you use the stand cover to protect the screen, does the adjustable part sit against the screen or does it lock or clip?
Sent from my Nexus 7 using xda app-developers app
wpghtc said:
When you use the stand cover to protect the screen, does the adjustable part sit against the screen or does it lock or clip?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It clips/locks closed against the Cover.
Hey, awesome review ! Just the case I will be wanting when I get my N7 !! Does anybody know where I could purchase this in the UK? Thanks,
Sleep Function?
This case does not have the sleep function in the cover, right? Was torn between this one and the FitFolio from Speck. I went with Speck. But I am drawn to this one for some reason. It is Otterbox-esque. I have 7 & 5 year olds. Great review.
IrieBro said:
This case does not have the sleep function in the cover, right? Was torn between this one and the FitFolio from Speck. I went with Speck. But I am drawn to this one for some reason. It is Otterbox-esque. I have 7 & 5 year olds. Great review.
Click to expand...
Click to collapse
Correct
Sent from my DROID RAZR using xda app-developers app
Here is a picture of the white shell, love the contrast, looks really sharp!
Sent from my Galaxy Nexus using Tapatalk 2
IrieBro said:
This case does not have the sleep function in the cover, right? Was torn between this one and the FitFolio from Speck. I went with Speck. But I am drawn to this one for some reason. It is Otterbox-esque. I have 7 & 5 year olds. Great review.
Click to expand...
Click to collapse
I found a small but powerful magnet (it came from an old phone holster) taped it to inside of the seidio cover above where the sleep sensor is (the part / side that has the stand and the area would be about 1/4 inches inside of the pogo pins) and sleep function works..... You can use felt tape, or even crazy glue... ymmv....
Sent from my Nexus 7 using XDA Premium HD app
mk69 said:
I found a small but powerful magnet (it came from an old phone holster) taped it to inside of the seidio cover above where the sleep sensor is (the part / side that has the stand and the area would be about 1/4 inches inside of the pogo pins) and sleep function works..... You can use felt tape, or even crazy glue... ymmv....
View attachment 1461246
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
So the magnet is high enough that it never comes in contact with the nexus?
does the border of the case around the screen seem like it gets in the way when holding the device and swiping the screen or anything?
ontoptherock said:
does the border of the case around the screen seem like it gets in the way when holding the device and swiping the screen or anything?
Click to expand...
Click to collapse
For me, not at all.
Thanks a lot. I was going to order the Speck Fit Folio, but I'm a bit paranoid and worried about drops. I also have cats and dogs at my place, and I don't need them knocking it over or something.
Thanks OP. I really like this case. Its just what I need. It looks way better than the roo case I'm using now. Plus it will keep slim profile. I think I will order this this weekend. With too case, the corners are stil exposed. This case seems like the best protection overall fpr nexus 7.
how about the bulkiness off the case, just ordered mine from seidio, so i should find out myself by next week. The gf said it looks to be very much a guy case when i asked her what she thought of it, but i always find myself spending the money in order to protect my investments in devices. looks much bettter than the fake leather cases that fold like a book.
Introduction
I know the search for cases for this phone has been a little annoying and, in some cases, (hah!) underwhelming. I decided to pull the trigger on a case from a brand I've never bought before. I wanted a low profile case that provided, at least, decent protection. After some research, I purchased the Ringke FUSION Case over at Amazon for $12.99. My goal here is to provide people with some quick and concise information so they can make an informed decision when looking to buy a case for the Nexus 5X. So lets jump right in and see how this baby holds up to my expectations.
Disclaimer: I bought this case with my own money. I haven't been paid to endorse this product in any way. I'm also not a professional photographer, so the pictures I took with the M9's underwhelming camera is about the best my trembling, hungover hands could manage.
Details
It comes in two colors, "Smoke" (Grey) and "Crystal View" (Clear) -- Both are priced at $12.99
The case is made of Silicone TPU and the Plastic (maybe polycarbonate?).
No matter which color you choose, both come with an "HD" screen protector.
Initial Impressions
The case comes packaged quite nicely, sealed in a bubble-wrap insulated envelope. Upon opening the package we're greeted with Ringke's "ECO Package" which is supposedly saving the polar bears or something. It touts that they have sold over 10 million products, use non-toxic materials, and also instructs me to "feel good adout myself".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's also a little funny because within this ECO package is another plastic Ziploc bag that houses the actual case.
Within this resealable bag you'll find the actual case. It has a protective film plastered on both sides of the clear plastic that shows off the rear of your beautiful new phone. This must be removed before installation. (Forgive me, I did not take pictures of this). The screen protector is also placed perfectly inside the case. My immediate impressions were that this case felt pretty decent for the price. It's light, the TPU sides felt grippy and the plastic (after having removed the protective films) felt a bit grippy and not brittle at all. This bolstered my initial confidence in the case that if I were to drop the phone accidentally on a hard surface that it'd shrug it off without a problem.
Installation and Fitting
The Screen Protector that comes with this case is a thin flexible film. It's plastic, not tempered glass and isn't the same material you'd experience with, say, a Skinomi TechSkin screen protector either. The screen protector comes with films attached to both sides. Both films are labeled with a description as well as a number to let you know which one you're suppose to remove first.
After washing my hands, I removed the adhesive film and carefully placed it on my phone. I placed the screen protector on the bottom and slowly applied it from the bottom up, using a credit card to smoothly apply the protector to mitigate any air bubbles. Application was pretty easy and just took about 3 seconds of patience. The protector fits almost perfectly. I applied it about a millimeter or two off center to the left, so there's a bit of a gap between the protector and the case now but it's hardly noticeable. As you can see from the picture above, the protective film that gets removed from the protector is colored blue, which I promptly removed, crumpled up and threw in the garbage before taking a picture. Because I'm an idiot.
The screen protector DOES have a cut out for the proximity sensor (are you listening Spigen?).
The case itself is a pretty easy installation. I slid the top portion of the phone in first, so that the buttons wouldn't get pressed during installation. With a satisfying hugging/click sound I then pressed the bottom end of the phone into the case. The case fits snuggly and does not allow the phone to move around at all. That being said, removal of the case is quite easy and can be done in seconds. This, however, I can't see happening by accident in your pocket or any other situation. This is exactly how I like my phone cases. Easy to install and remove without it just falling off from tumbling around in my shorts or something.
How the case fits the phone is a huge plus in my book. There is a TPU lip that goes around the entire face of the phone that provides some extra scratch protection if I were to place the phone face down.
On the back you can see the clear plastic allows the nice Nexus logo to shine through. There's a proper cutout of the Fingerprint sensor, Camera, Laser Auto-focus and Flash LED.
The plastic lays flush with the camera lense / glass, providing decent protection from a fall if the phone were to land on it's back. This case basically lets the phone lay flat on a desk or anything else due to little bumps at all four corners of the case. This is nice so that the phone no longer rests right on it's fragile camera when placed face up on a flat surface.
Features & Other thoughts
This case seems to be as well thought out as it is constructed. There is a properly sized cutout for the USB-C port as well as the headphone jack. The headphone jack, however, has a TPU flap covering it to prevent dust from getting in. This is a bit annoying sometimes to remove, but I like that they included it for the reason of cleanliness. There's also a cutout for the bottom microphone.
Moving to the right side of the case, we can see that there are TPU buttons covering the Volume Rocker and Power button. Normally I hate these things because they're hard to find and usually dull the tactile feedback from the buttons. But the way these are implemented are probably the nicest I've ever felt. They're raised from the side of the case, so they're easy to find and feel quite nice when pressed giving a satisfying click sound that you'd get from the naked phone itself. Well done, Ringke!
There's also a cutout at the top for the top microphone as well.
The case feels nice to hold and doesn't add much bulk at all. The TPU sides are decently grippy but the gloss finish on them makes it slippery at times. My only complaint with the case is that the clear backing is a fingerprint magnet. If you have greasy hands the back will look smudgy and at times can be quite slippery. Not a big deal but if it catches the light a certain way it looks pretty bad.
As for the screen protector, I'm not exactly thrilled with it. I actually ordered a different screen protector before I bought this case, but it hasn't shipped yet so I just threw this one on for now. I'm fairly sure the screen protector isn't oleophobic, so finger prints and smudging happens pretty often. Which is a shame because it feels pretty nice to interact with.
Overall
Overall, I really like this case. It offers adequate protection from minor falls and scratches for the price without adding nearly any bulk. It also allows the phone to lay flat on flat surfaces without resting on the camera, which is a major plus. The case is easy to install and remove and fits nicely. It's a well-thought-out case with no glaring oversights or problems. The screen protector, however, is a bit lackluster. But hey, it was a free and it's a stand in for my Tempered Glass one arriving in the mail next week. Those looking for a low-profile, comfortable and protective case for there brand new N5X, look no further.
I second this. Using it right now
Sent from my Nexus 5X using Tapatalk
Thanks for the review. Sounds like just what I want, ordered one from Amazon.
Sent from my Nexus 5X using Tapatalk
I myself have never used a case before but will try for my 5X, you saved me quite a bit of research. Thanks a lot mate!
I had this case for the note 4 and it had very rough edges, this case does not! Very nice case for the price. Nice review too.
I bought this in clear. It's nice, but I just can't stand the feel of a case on this phone (not to be confused with saying I don't like the feel of the case, because the case feels great). I might go caseless for the first time in years.
Sent from my Nexus 5X using Tapatalk
dpwhitty11 said:
I bought this in clear. It's nice, but I just can't stand the feel of a case on this phone (not to be confused with saying I don't like the feel of the case, because the case feels great). I might go caseless for the first time in years.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I ran my old N5 naked for a long time while in school and while it was nice it was ultimately a bad call because the wear definitely accumulated over time.
Got this case based on your review and I'm really happy with it. It's a very simple case that appears to be well-made and doesn't add a lot of bulk. The buttons have a great feel and for about $10 you can't go wrong.
Very nice review.
I used the ringke fusion case for my n4 and loved it. Ordered it for my n5x and was a little disappointed that it's an all tpu case. I've personally never cared for tpu cases. The case is too smooth for my taste and I think makes it harder to hold on too.
The n4 version was nicer because the outside wasn't a smooth tpu and a solid and more case like plastic while retaining the clear back. It also has small edges where the plastic parts met on the back which help when gripping and holding the phone.
The n5 is almost smooth all around. Gonna give it another week or so but will probably be looking for something else or going with now case.
It's still a decent case, but just wanted to make sure people realize the fusion line cases has changed from the older phones.
Sent from my Nexus 7 using XDA Free mobile app
It's definitely not an all TPU case. The back is a hard plastic and the sides are a softer TPU material.
I like the case for everyday use, but am still looking for something with a little more protection for work.
Sent from my Nexus 5X using XDA Free mobile app
Ringke Fusions are my favorite cases on the market right now. I've had 7 of them for various devices. All fit perfectly and no discoloration or scuffs. Great cases
Received this one yesterday in smoke color. First time using a case since my OG droid incredible. I didn't want to use a case but after my nexus 5 experience (RIP N5 screen x2) it was the smart play. Exactly what I was looking for, snug fit with some rubbery protection for the edges and not too much added bulk. I approve of this case.
I saw a review on Amazon (and a comment following it) saying that this case scratch the part where the camera is:
http://www.amazon.com/gp/customer-reviews/RR9AFEF94JZWZ/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B014RS5BHW
Can you, or anyone who has that case, confirm this?
TheeWolf said:
I saw a review on Amazon (and a comment following it) saying that this case scratch the part where the camera is:
http://www.amazon.com/gp/customer-reviews/RR9AFEF94JZWZ/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B014RS5BHW
Can you, or anyone who has that case, confirm this?
Click to expand...
Click to collapse
It does not, the case has little feet on the corners that keep the camera from touching the table.
Here is a close up confirming the camera doesn't touch.
Also here is a couple real quick backings I made out of the included template.
oldpreowner said:
It does not, the case has little feet on the corners that keep the camera from touching the table.
Click to expand...
Click to collapse
oldpreowner said:
Here is a close up confirming the camera doesn't touch.
Click to expand...
Click to collapse
I think what they mean is the clear plastic on the back, the slot that has been cut out for the camera and flash has rough edges rubbing against the phone, which apparently damages the paint? I haven't had this issue.
oldpreowner said:
Also here is a couple real quick backings I made out of the included template.
Click to expand...
Click to collapse
That actually looks awesome. Do you have the link for the template?
@Alcolawl the template came with the case.
oldpreowner said:
@Alcolawl the template came with the case.
Click to expand...
Click to collapse
God damit I threw it out. wtf am I doing with my life?
EDIT: It was actually sitting at the top of my waste paper basket. Crisis averted.