Hi everybody, I’m a newcomer to the world of Android and Samsung Note SG-N7000 and I strongly need you expert help.
Yesterday I have rooted my phone running GB 2.3.6 LA6 (non-root, non-wipe) after doing a fair share of reading (I thought), but I used a wrong way. I.o. following Dr.Ketan’s advice and downgrading to an early rootable version of GB, I have followed the method described in How to Root your Galaxy Note GT-N7000 - PC tools&Others - UC FORUM - Powered by Discuz! At http://forum.ucweb.com/forum.php?mod=viewthread&tid=27123 thinking that it is a new faster and simpler method. But I was wrong.
Although everything went OK and I had root and a functional CWM v5.8 plus AbyssNotekernel42CWTouchOriginalLogo, I also got the yellow triangle and the counter set to 1. Later on I have discovered that CWM was not working correctly and also the screen was displaying “null” for each key typed on the keyboard.
To repair the things I have applied the semiautomatic rooting method described in OneClickRoot – ONLINE by Glevitan (many thanks to him) at http://forum.xda-developers.com/showthread.php?t=1783733 downgrading to GB2.3.5 LA4 with Odin to the 2.6.35.7....KJ1 kernel plus manual flashing of the CF kernel with CWM Manager v5.0.
Everything seems to work fine except that I still have the yellow triangle + the “null” result typing problem. I have wiped the phone and I have tryied out another 2 GB kernel, i.e the latest Abyss and Speed Mode, with the same results. Now I am back on the CF kernel with GB 2.3.5 KJ1.
This is the point where I need your expert help on how to cure the 2 above mentioned problems.
Also I have tried to flash with CWM the complete stock GB ROM 2.3.6 LA6 COA from the ext. SD card, but the installation was aborted from the beginning ("Can’t open" file on SD card). The ROM file is <GT-N7000_COA_N7000XXLA6_N7000OXXLA1_N7000XXLA4.zip> which has inside the archive 2 zipped files <N7000XXLA6_N7000OXXLA1_N7000XXLA4_HOME.tar.md5> and <SS_DL.dll>.
I suspect that there is something related to the format of the ROM archived files and I have no idea what the extension .md5 is for. I know that this is about checksum, but I have no idea on how to work with it, i.e was the download correct or not and how to get further to the .tar or zimage file. Kindly asking for your answers.
What kind of file do I need to place on the ext sd card, I thought it is a zip file for CWM and a .tar file on the PC for Odin. Am I wrong?
What do I need to do please in this stage in order to get to a fully functional rooted GB ROM with functional keyboard, no triangle plus the counter set to zero?
Any support will be highly appreciated. Thank you!
Big Fella
that sunds like the austalian rom, I myself have been trying to do that, yet u dont open the zip in cwm you open to extract the .tar file on your pc then flash through odin, be sure to put it in the pda section,
when you do this can you reply back and let me know if you can get past the 'factory fs' part in odin, thats where i am stuck
also when you flash the abyss ro your flash counter will go up, if you want to get rid of this let me know
Sent from my Transformer Prime TF201 using XDA premium HD
Devices - 64Gb Asus Transformer Prime rooted .28 Stock ROM
32Gb Asus Transformer completely stock
HTC Sensation XL running 4.0.3 with Musketeer ROM Sense 4.0
Samsung Galaxy S Running 4.0.3
HTC HD2 Leo, overclocked 1.4GHz 1 Gb RAM 4.0.3 tytung ROM, long live the LEO legend
For Traingle Problem use Traingle Away by Chain fire.
Now you have to flash a rooted gb rom (tar file)
Open odin.
Start your phone in Download mode.
Connect your phone to pc and wait for a minute for odin to detect it
Select file under pda tab which you have downloaded
Start flashing. Don't change any option.
Sent from my GT-N7000 using XDA Premium App
axelTP2 said:
Hi everybody, I’m a newcomer to the world of Android and Samsung Note SG-N7000 and I strongly need you expert help.
Yesterday I have rooted my phone running GB 2.3.6 LA6 (non-root, non-wipe) after doing a fair share of reading (I thought), but I used a wrong way. I.o. following Dr.Ketan’s advice and downgrading to an early rootable version of GB, I have followed the method described in How to Root your Galaxy Note GT-N7000 - PC tools&Others - UC FORUM - Powered by Discuz! At http://forum.ucweb.com/forum.php?mod=viewthread&tid=27123 thinking that it is a new faster and simpler method. But I was wrong.
Although everything went OK and I had root and a functional CWM v5.8 plus AbyssNotekernel42CWTouchOriginalLogo, I also got the yellow triangle and the counter set to 1. Later on I have discovered that CWM was not working correctly and also the screen was displaying “null” for each key typed on the keyboard.
To repair the things I have applied the semiautomatic rooting method described in OneClickRoot – ONLINE by Glevitan (many thanks to him) at http://forum.xda-developers.com/showthread.php?t=1783733 downgrading to GB2.3.5 LA4 with Odin to the 2.6.35.7....KJ1 kernel plus manual flashing of the CF kernel with CWM Manager v5.0.
Everything seems to work fine except that I still have the yellow triangle + the “null” result typing problem. I have wiped the phone and I have tryied out another 2 GB kernel, i.e the latest Abyss and Speed Mode, with the same results. Now I am back on the CF kernel with GB 2.3.5 KJ1.
This is the point where I need your expert help on how to cure the 2 above mentioned problems.
Also I have tried to flash with CWM the complete stock GB ROM 2.3.6 LA6 COA from the ext. SD card, but the installation was aborted from the beginning ("Can’t open" file on SD card). The ROM file is <GT-N7000_COA_N7000XXLA6_N7000OXXLA1_N7000XXLA4.zip> which has inside the archive 2 zipped files <N7000XXLA6_N7000OXXLA1_N7000XXLA4_HOME.tar.md5> and <SS_DL.dll>.
I suspect that there is something related to the format of the ROM archived files and I have no idea what the extension .md5 is for. I know that this is about checksum, but I have no idea on how to work with it, i.e was the download correct or not and how to get further to the .tar or zimage file. Kindly asking for your answers.
What kind of file do I need to place on the ext sd card, I thought it is a zip file for CWM and a .tar file on the PC for Odin. Am I wrong?
What do I need to do please in this stage in order to get to a fully functional rooted GB ROM with functional keyboard, no triangle plus the counter set to zero?
Any support will be highly appreciated. Thank you!
Click to expand...
Click to collapse
Hey, thanks for using the tool...glad it works. To fix the null issue You will have to flash a Firmware with the CSC file with mobile odin.
The yellow triangle Is solved with the triangle away app by chainfire....or using a jig.
@OP
What i understand is
You are on now
CF kernel with GB 2.3.5 KJ1.
you want solution for two problem
Keyboard null
Triangle + raise counter
OK
just follow this
-Reboot in recovery
-Wipe cache and data
-Download and flash any ICS ROM with PC odin
-Root it
-Use triangle away appl to reset counter
Hope at end you won't have any issue
links needed
To flash N root ICS ROM -http://forum.xda-developers.com/showthread.php?t=1424997
For triangle away - http://forum.xda-developers.com/showthread.php?p=22463153#post22463153
How to use triangle
Download and install triangle v1.70 from link above
open it, it will ask to download flasher file, allow it to download
Now select to reset countre, it will reboot in recovery N will do job.
Thank you everybody for taking the time to answer me.
I have solved my problem by using PC Odin for flashing a 3 file GB stock rom XXLC1 OXA Open Europe, which finally has brought me back to normal. Then I have flashed further the single file GT-N7000_COA_N7000XXLA6_N7000OXXLA1_N7000XXLA4.zip getting me back to the original LA6 stoc rom.
I have no idea on why this zip file did not work from the beginning, but for sure I was doing somethng wrong.
The Keyboard null was cured while flashing he new CSC file I guess.
The yellow triangle disappeared due to the stock rom flashing, while for the binary counter I have used the usb jig and the 10 steps procedure.
Now I need to root by going the correct way of Dr.Ketan, i.e. by downgrading first, no shortcuts.....
Many many THANKS again to eveybody giving me these precious advices.....
Related
Hey guys,
I hope you can help me. I am aware of the ICS Kernel Bricking bug, and the faulty chip with the faulty firmware, as described on the xda portal, and I read all the stickies. Nevertheless I want to ask you for your opinion on this matter, to prevent turning my note into a brick
So thats what happend last night:
I was on LPY for about 1 month (since released) with root, stock kernel. Before I was on GB DarkyRom 3.3. Everything went normal until I made 2 changes the last hours:
1. I modified the build.prop with this tutorial:
http://forum.xda-developers.com/showthread.php?t=1687156
2. I installed Super Video (like popup player on the galaxy s3) and had several freezes when I started to watch 2 videos. So I took out the battery like 4 times.
Phone booted normally. So I locked the screen, and went to a party.
Then I realized that within 2 Hours the battery got from 50% to 15%. I was too busy to look at betterbatterystats, so I just rebooted the phone with the stock Power Menu.
Now my phone won't boot anymore. It stucks on "Samsung Galaxy Note N-7000" Screen.
As I said, I have not wiped, or do anything with cwm or 3e recovery. However, I can get into DL mode and 3e recovery.
What can I do now? Flash LPF? Reflash LPY?
I read somewhere by someone, that it could be, that even without wiping, the phone can get brick at anytime... Did that happend to me?
I haven't tried to flash anything else, because I wanted to share this with you and get your opinion.
Thanks in advance
k!DDa
So now donot try anything.I suppose you were in darkyrom 3.3 re.If so,you should have known about the counter.So flash it and you will be fine.I again say it will increase counter if you use 3.3 re.
If you don't want the counter,flash a stock gb rom/stock-rooted gb rom.I prefer 3.3 re because it is a wipe rom
Hi vijai2011,
thanks for your answer but I was on darkyrom BEFORE I switched to LPY (that was just a side note^^)
> the last month, including today, I am on LPY, which isn't booting anymore.
k!DDa said:
Hi vijai2011,
thanks for your answer but I was on darkyrom BEFORE I switched to LPY (that was just a side note^^)
> the last month, including today, I am on LPY, which isn't booting anymore.
Click to expand...
Click to collapse
thats not a problem.you can try.
wow you're fast^^
okay but isn't it possible to revive my note? e.g. just flashing a non wipe ICS version via PC ODIN (I do not care about the counter or triangle)
like criskelos ICS No wipe http://forum.xda-developers.com/showthread.php?t=1609252
the inability to boot you describe sounds like something a corrupted build.prop might cause so it's probably nothing to worry about. you'll need to restore your build.prop somehow, probably by flashing something in Odin
ok thanks, I will try. but one good and one bad thing:
I saved the original build.prop before
But on the internal SD card and not my external ^^
If you want to be absolute sure Flash a stock ICS (a full wipe version) rom from pc odin. If all goes well there is no brickissue for you. Then you root using Dr Ketans method.
Sent from my GT-N7000 using xda premium
k!DDa said:
wow you're fast^^
okay but isn't it possible to revive my note? e.g. just flashing a non wipe ICS version via PC ODIN (I do not care about the counter or triangle)
like criskelos ICS No wipe http://forum.xda-developers.com/showthread.php?t=1609252
Click to expand...
Click to collapse
No problem.As I said already its better to go for a wipe rom because of the repartition thing...
one last qustion,
I decided to reflash LPY. But it has only an tar.md5 file. I cannot use MobileOdin. Can I just put it in PDA at PC Odin? (Rename it before to .tar?)
The last 20 firmwares I flashed hadn't that extension.
k!DDa said:
one last qustion,
I decided to reflash LPY. But it has only an tar.md5 file. I cannot use MobileOdin. Can I just put it in PDA at PC Odin? (Rename it before to .tar?)
The last 20 firmwares I flashed hadn't that extension.
Click to expand...
Click to collapse
yes that will work fine, but don't rename it. it works as .tar.md5
yes put the md5 in the pda section and flash with pc odin as normal
Thanks guys my phone is booting again
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
strangermyself said:
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
First you should t have flash abyss through odin since now you are not rooted and do t have the warranty too, the counter of flashes increased to 1 (look at the download mode small text), for rooting you can use chainfire's tool (in the cf-root kernel thread look for it in devolepment section) next get a stock rooted kernel and flash using the tool (read instructions).
For now use pc odin 1.87 and get a firmware 2.3.6 use the pc odin select the file on PDA and flash it, make sure phone is charged 100% and press start, if it doesn't work then uninstall drivers, reboot machine, reinstall them and kill kies process if present in task manager and then goto download mode connect USB and open pc odin wait for the port to be ready aka green and select file then start.... you should be fine its a soft brick afterall.
Sent from my GT-N7000 using Tapatalk 2
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
strangermyself said:
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
Click to expand...
Click to collapse
When connected to charger make sure phone is off the battery meter will show as soon as you connect, case it doesnt leave it for like 3 hours is fine... next about that ROM redownload. The package cleanup you temp directories in PC and try again if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
REVERSiN said:
... if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
strangermyself said:
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Whiskeyjack4855 said:
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
Dude its a GB rom not superbrick bug in it and he didn't mention LPY yet.
Sent from my GT-N7000 using Tapatalk 2
strangermyself said:
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
Click to expand...
Click to collapse
Sorry for tea doubled post its a dumb app X's
You wipe using the CWM file in the Iss root section, and a normal recovery wipe would do too (aka restore defaults)
Sent from my GT-N7000 using Tapatalk 2
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
strangermyself said:
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
Click to expand...
Click to collapse
If you have the stock recovery, restore default wipes everything.
If you have stock re every and want CWM temporary just to wipe goto n7000 devolepment and check how to root by dr.ketan and get files there
If you have CWM then wipe data, wipe cache, wipe dalvik.... and try. Old download another firmware like kk5.... something else not the new LC1 LX1 releases.... (Latest GB) get an old one to get root easly
Sent from my GT-N7000 using Tapatalk 2
Hello!
First of all I've searched all the posts about this problem.. and personally I can't fix it.
So here is what I've done to brick my Galaxy Note GT-N7000 (I think that's called a non-usable device).
Installed few ROMs and finally after taking some decisions I've returned back on ICS 4.0.3 (Flashed with ODIN 1.85).
Restored EFS with kTool (because ClearNotev5 did something wrong with my phone.. and discovered after few hours that I can restore EFS).
Updated ICS 4.0.3 to 4.0.4 using WIFI (OTA I think it's called) and BANG after restart phone stucked at Bootscreen.
So from yesterday untill now I've restored my phone to factory settings few times(GB 2.3.5 & 2.3.6/ICS 4.0.4),repartitioned with .pit files for N7000 16GB,installed different custom/stock ROMs and nothing.
I've discovered few minutes ago while triyng to make a factory restore (GB 2.3.5) that my phone stucked at data.img... I've read about this and it is said that I must change my N7000 motherboard.. I have no warranty so please help.. and sorry for my bad english
Read many times about ota harbrick, i think its not advisable to use ota for upgrade. Sorry for your loss.
Flash gb in pc odin, if sucessfull and still stuck in logo go to CWMR and perform 3 wipes. This is all advise i can give you.
And try different gb rom.
allexsava said:
So from yesterday untill now I've restored my phone to factory settings few times(GB 2.3.5 & 2.3.6/ICS 4.0.4),repartitioned with .pit files for N7000 16GB,installed different custom/stock ROMs and nothing.
I've discovered few minutes ago while triyng to make a factory restore (GB 2.3.5) that my phone stucked at data.img...
Click to expand...
Click to collapse
^^
I think you had already tried the recovery method from a bricked device. So if you still facing problems you have to change the MB.
OTA Brick or Soft Brick?
I still haven't fix it but here is what I want:
Can someone give me different versions of GB (I've tried only one with CSC,MODEM but this now stops at data.img..) :crying:
I have to make a repartition to my phone? Will that help?
And can someone guide me through a tutorial step by step on how to revive my phone from EMMC Bug..?
PS: When I try to wipe data in CWM (using Hydracore Kernel v2.0b STD) with ICS 4.0.4 (Stock) my N7000 stucks,same for installing CleaNotev5.0 (stucks at Extracting\System).. But what is curios is that, I can clear Dalvik Cache and Cache, I can install Kernels and run N7000 in DOWNLOAD/CWM or stock Restore mode.
Any solutions?Please help..
allexsava said:
I still haven't fix it but here is what I want:
Can someone give me different versions of GB (I've tried only one with CSC,MODEM but this now stops at data.img..) :crying:
I have to make a repartition to my phone? Will that help?
And can someone guide me through a tutorial step by step on how to revive my phone from EMMC Bug..?
PS: When I try to wipe data in CWM (using Hydracore Kernel v2.0b STD) with ICS 4.0.4 (Stock) my N7000 stucks,same for installing CleaNotev5.0 (stucks at Extracting\System).. But what is curios is that, I can clear Dalvik Cache and Cache, I can install Kernels and run N7000 in DOWNLOAD/CWM or stock Restore mode.
Any solutions?Please help..
Click to expand...
Click to collapse
You can try the post here :
http://forum.xda-developers.com/showthread.php?t=1667886&highlight=emmc
Just follow the step there.
I've experienced before, and revive it using this method. So far mine still work well, and no further error ever since.
You will loose certain GB on your internal storage. Which for me it's not a big deal. I'm kinda lazy to go to samsung repair center, unless my phone is totally dead.
Here is my step (follow at your own risk) :
1. You have to know first your N7000 is the 16GB or 32GB, and then you download the correct pit for your phone.
2. After you download, extract the zip file.
3. Since mine is the 16GB, I've picked this pit file to use (inside the zip) : Q1_20110914_16GB-patched-regain-0102400-kB.pit (the pit file will be vary depending on which sector your phone brick)
4. Put your phone on to download mode.
5. Open ODIN PC and connect your phone, and wait till ODIN say "Added" and you see that your phone has connected.
6. Put the patch pit file I choose, then put the samsung stock rom as the PDA (if you downloaded 1 file only for the stock ROM, if not, put properly for the PDA, Phone, and CSC).
7. Check ON the "repartition", "Auto-reboot", "F-reset time"
8. Click Start, and wait till the process has finished. Your phone should auto reboot by then.
9. My phone has recovered, and I lost 1GB internal storage.
One last thing, try not to do wipe on ICS, unless you are on a safe kernel like speedmod / GLNotecore.
For Hydracore (You may check with the developer), I haven't tested it yet for wiping. But for those speedmod and GLNotecore, is confirm safe kernel. I've tried these 2 for wiping.
PS : if you are not sure with my step on reviving with the pit file, I suggest you to read the link above from the OP for the pit revive method.
Good Luck !
antique_sonic said:
You can try the post here :
http://forum.xda-developers.com/showthread.php?t=1667886&highlight=emmc
Just follow the step there.
I've experienced before, and revive it using this method. So far mine still work well, and no further error ever since.
You will loose certain GB on your internal storage. Which for me it's not a big deal. I'm kinda lazy to go to samsung repair center, unless my phone is totally dead.
Here is my step (follow at your own risk) :
1. You have to know first your N7000 is the 16GB or 32GB, and then you download the correct pit for your phone.
2. After you download, extract the zip file.
3. Since mine is the 16GB, I've picked this pit file to use (inside the zip) : Q1_20110914_16GB-patched-regain-0102400-kB.pit (the pit file will be vary depending on which sector your phone brick)
4. Put your phone on to download mode.
5. Open ODIN PC and connect your phone, and wait till ODIN say "Added" and you see that your phone has connected.
6. Put the patch pit file I choose, then put the samsung stock rom as the PDA (if you downloaded 1 file only for the stock ROM, if not, put properly for the PDA, Phone, and CSC).
7. Check ON the "repartition", "Auto-reboot", "F-reset time"
8. Click Start, and wait till the process has finished. Your phone should auto reboot by then.
9. My phone has recovered, and I lost 1GB internal storage.
One last thing, try not to do wipe on ICS, unless you are on a safe kernel like speedmod / GLNotecore.
For Hydracore (You may check with the developer), I haven't tested it yet for wiping. But for those speedmod and GLNotecore, is confirm safe kernel. I've tried these 2 for wiping.
PS : if you are not sure with my step on reviving with the pit file, I suggest you to read the link above from the OP for the pit revive method.
Good Luck !
Click to expand...
Click to collapse
Thank you for this magnific guide but.. I got one question? How do I know wich sector on my phone is bricked? Is there a tool to flash or something? Can you simplify for me because here(http://forum.xda-developers.com/show...highlight=emmc) it's to complicated for me
Find your gb rom here. http://forum.xda-developers.com/showthread.php?t=1424997
No more option left, for mmc cap erase brick, go here. Pls read carefully. http://forum.xda-developers.com/showthread.php?t=1667886
I've got a problem: I am from Romania and all GB's from Romania are on COSMOSTE and VODAFONE but I'm on ORANGE..Is there a problem to install a VODAFONE/COSMOTE GB?
allexsava said:
I've got a problem: I am from Romania and all GB's from Romania are on COSMOSTE and VODAFONE but I'm on ORANGE..Is there a problem to install a VODAFONE/COSMOTE GB?
Click to expand...
Click to collapse
No problem. Just pick any gb rom, one problem at a time, your problem now is how your phone can boot up.
If you want go to www.sammobile.com and pick your specific rom.
I've downloaded the COSMOTE GB ROM and I will flash it with PC ODIN.
After that I need as I was saying few posts ago how to identify which part of my internal storage is bricked..but a simplified method/guide please.. and sorry for my requests but believe me I'm kinda desperate..
allexsava said:
I've downloaded the COSMOTE GB ROM and I will flash it with PC ODIN.
After that I need as I was saying few posts ago how to identify which part of my internal storage is bricked..but a simplified method/guide please.. and sorry for my requests but believe me I'm kinda desperate..
Click to expand...
Click to collapse
You may refer to this post.
http://forum.xda-developers.com/showthread.php?t=1823918
The OP stated very clear on how to get the part of your bricked storage.
After emmc_find_brick_start.zip I get stucked on:
scanning 1167 Mib = 1224 MB ... (picture below)
And now I am waiting emmc_find_brick_end.zip to get stuck
LE: emmc_find_brick_end.zip stuck at:
scanning 3356 MiB = 3520 MB ... (picture below)
allexsava said:
I've got a problem: I am from Romania and all GB's from Romania are on COSMOSTE and VODAFONE but I'm on ORANGE..Is there a problem to install a VODAFONE/COSMOTE GB?
Click to expand...
Click to collapse
Shouldn't be a problem. However, best to root current, then efs backup multiple locations. See dr ketans toolbox thread on how.
Your phones csc is also Romania? Best to stick with your phones csc and those country roms if you want to continue ota/kies updatability in the future Dial *#06# for emei and then *#272*yourimeihere# to find out 3 letter csc.
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Shouldn't be a problem. However, best to root current, then efs backup multiple locations. See dr ketans toolbox thread on how.
Your phones csc is also Romania? Best to stick with your phones csc and those country roms if you want to continue ota/kies updatability in the future Dial *#06# for emei and then *#272*yourimeihere# to find out 3 letter csc.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
If I can boot up my phone I'll consider your reply
allexsava said:
If I can boot up my phone I'll consider your reply
Click to expand...
Click to collapse
goodluck booting!
Sent from my GT-N7000 using Tapatalk 2
SOLVED
:fingers-crossed: Sorry for late response guys but yeah I've fixed it by patching the right .pit file and got only 8,83 GB internal memory.. Flashing CriskeloRomNOTE.vICS-V11.2 and HydraCore v3.5 STD.. I've got few problems with ROM, suddenly stuck in different situations but again yeah.. I'm happy I didn't changed my MB ..if someone got some ideas why it stucks please reply
At least you dont have to pay for mobo which is 200 dollars.
Sent from my GT-N7000 using xda premium
if you get succesful flash of gb then stay on it don't upgrade to ics.. "something is better then nothing"
Sent from my GT-N7000 using Tapatalk 2
Thank you all for the support
Sent from my GT-N7000 using xda premium
Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?
Some pretty basic reading for you: http://forum.xda-developers.com/showthread.php?t=1321268
Enjoy.
Moved To Q&A
Please do not start question threads in the development section
baseliner said:
Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?
Click to expand...
Click to collapse
First of all, I'm not sure if this is the answer your looking for, but here is it anyway.
IN PC ODIN, there is a 'PDA' button (same button you flashed your kernel to), you need to download the ROM's zip file and flash it from there.
Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Would these be the files needed to get my phone back up and running? I am new to Android and screwed my phone up after a factory reset, now it just reads downloading for ages and does nothing. I still get a screen that reads Hyperdroid RedPill Recovery when i power on with volume button up pressed. Volume down I get Android man and it reads downloading but does nothing.
I have looked all over for this situation but seem to get a piece here and there and not the exact same issue all in one so I am reluctant to just do something and make it worse.
Please advise
That is downloading mod, it won't do anything but remain as it is, if you don't do anything.
You need to connect you device to PC in this state and have to use odin
Read 1st line on my sign and read post#2, you will get full instruction, how to use odin.
Sent from my GT-N7000 using xda premium
Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio
geotux said:
Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio
Click to expand...
Click to collapse
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.
This rocks ...
dashing_9508 said:
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.
Click to expand...
Click to collapse
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.
geotux said:
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.
Click to expand...
Click to collapse
No problem ever . yep, Jellybean works , infact it rocks ! . the stock gingerbread firmware is crap if compared with jellybean . I use cm 10.1 Android 4.2.2 makes my phone butter smooth doesn't matter its quite old though but works like a charm. did you root your phone ? using semaphore kernel ? you have to root it first to install jellybean for XXJVT , here's the link for the kernel :-
http://78.46.194.137/kernels/Semaphore_kernel_JVT_1.9.1.tar
flash it the way i told you , you have to select it in the PDA file option in Odin. hope it works for you now .
http://www.youtube.com/watch?v=1RoZU5ZPMS4
http://www.darkyrom.com/index.php?posts/180469/
check these out