AirDroid won't work w/ ICS Leak? - Motorola Droid 4

I can't get AirDroid to connect using ICS leak 213.
I can't even get my phone to respond to a ping from my laptop on the same network, though I can ping my laptop from my phone on the same network.
Any ideas?

JasonOT said:
I can't get AirDroid to connect using ICS leak 213.
I can't even get my phone to respond to a ping from my laptop on the same network, though I can ping my laptop from my phone on the same network.
Any ideas?
Click to expand...
Click to collapse
It sounds more like a network/router issue than an AirDroid issue, it worked fine for me in .213 and .215 leaks.
Is your phone on a VPN connection? If yes, then it's possible that your phone has multiple IP addresses and AirDroid is showing one which is not accessible from your laptop.
Did you try both connection methods? Via the local IP and via the AirDroid.com wensite?

No VPN connection.
I tried both by local IP and web.airdroid.com, and checked that the local IP is correct from both About>Status and my router.
If I try to connect just through Chrome, I never get anything. If I try to connect by scanning the QR code through my phone, I can sometimes get it to connect initially and bring my to the AirDroid desktop, but I almost always can't access contacts, messages, etc.
I tried port forwarding 8888 for my local IP, but that didn't seem to make any difference.
The strange thing is that my Touchpad works fine with AirDroid. In the past, I've had some odd Wifi issues with both my Droid 4 and my Droid 3, e.g. adding an Exchange account won't complete setup if I'm using wifi on either of those phones (on GB and ICS), but it has worked fine on Android devices without cellular radios (my Touchpad and Archos 101).
It appears like it's a network/router issue, but at the same time appears like it's not.

JasonOT said:
..but it has worked fine on Android devices without cellular radios (my Touchpad and Archos 101).
Click to expand...
Click to collapse
There could be a clue right here. Do you have a mobile data subscription?
If yes, then perhaps there are some very small WiFi drops which cause Android to try to connect to mobile data instead of WiFi, and the time it spends without the local IP might just be enough to impact AirDroid performance.
You could try the following:
Put the phone in Airplane Mode to disable all wireless connections
Manually enable WiFi - this is possible without disabling Airplane Mode
Now you are on a pure WiFi connection, no mobile data or Bluetooth PAN to interfere. Does that improve AirDroid's behaviour?
Also, if you know how your router works, you can give the Droid 4 a fixed IP address to avoid the IP changing when there is any network hiccup. Most modern routers usually seem to remember which IP they assigned to a device via DHCP anyway (at least for a limited amount of time) but it's worth a shot.

No such luck with the Airplane Mode/Wifi. I outright turning the cell radio off with Phone Info too, still didn't work.
With DD-WRT, my router will keep IPs and MACs associated, so it's not that the IP is changing.
If I reboot the phone, it'll work a little bit initially but eventually stop working and I won't be able to ping it either.

Related

N1 - 5GHz Wifi?

Does the N1 have 5GHz wifi like the Samsung?
My home LAN is 5GHz only, so I don't disturb the neighbors with my video streaming.
No, 2.4 only...
Ugh.
OK so I turned on the router's 2.4GHz, but with broadcast SSID off. My N1 wouldn't even try to connect. So I turned on router SSID and it connects AES.
I do -not- want SSID broadcast on, as Windows machines' lazy active scan will find me. Sure they'll never get in, but I do not want broadcast on.
Has anyone succeeded in connecting with it off?
When I am connected wifi and open a website on the phone, does it go over wifi preferred over 3G?
I want to share the SD card with a machine on the LAN. What's the best way to do this? FTP? Reverse SSH tunnel? Is there a sshfs for Android? EDIT: NM on this one.
Yes, I remember connecting to a WiFi with SSID off, when I had Nexus.
It is pointless to keep SSID Broadcasting off. It is super easy to find your SSID anyway, and it causes all sorts of additional problems (like the one you are seeing above). Just keep the network secure and it makes life a lot easier.
http://www.howtogeek.com/howto/2865...hiding-your-wireless-ssid-really-more-secure/
http://blogs.technet.com/b/steriley/archive/2007/10/16/myth-vs-reality-wireless-ssids.aspx
Ok, but sure passive scanners like Kismet will still see me, however 90% of scans are done with an active scanner like Winduhs. Of course I'm using WPA2-AES, but I want to take every measure possible.
Now I find that whenever I have the phone connected to wifi, I lose -all- internet access. Just times out. 3G is still on and wifi is showing connected, but I can't get to websites. As soon as I turn off Wifi I can access the internet again through 3G.
With wifi I -can- access the wireless router's setup webpage from my phone, which tells me I am working through wifi, and I can remotely mount the phone filesystem on a LAN machine using sshfs, but I can not reach anything outside. Any idea why?
Does anyone know whether, when it's working right, it uses the wifi connection in preference over 3G?
The WiFi is ALWAYS preferred to 3G, which means - when you're connected to WiFi, all the internet traffic is routed through WiFi.
I don't understand then, why all data traffic stops to the outside when wifi is connected. The rest of my LAN gets outside fine, just not the phone.
If you can see LAN computers and exchange data with them - it's not the phone that's making problems. See if you have any restrictions in your router.
Oh FFS, my fault...
I set my IP statically for my LAN, and through some alert troubleshooting I found I can ping IPs outside but not DNs. I'd mis-set the DNS server in wifi settings. Now it works great!
I can now use sshdroid to mount my phone's filesystem on my LAN securely. Now, if I could only get it to wifi associate with beacon off...
It would also be nice to mount a filesystem on my LAN to the phone, although I consider the phone unsecure and question the wisdom of that, even with DroidWall running.
There is a market app that lets you connect to a hidden ssid
Sent from my Nexus One using Tapatalk
Cool, but Market is FCing on me. I did a complete reinstall of the newest MIUI.us, and now Market's FCing again. So can't install any Market apps.
As someone else said, turning SSID off is pointless. It's like taking the numbers off the outside of your house and thinking people driving by won't see your house sitting there.
Apparently you didn't understand what I said here:
Quantumstate said:
Ok, but sure passive scanners like Kismet will still see me, however 90% of scans are done with an active scanner like Winduhs. Of course I'm using WPA2-AES, but I want to take every measure possible.
Click to expand...
Click to collapse
If nothing else, please just respect my decision in this regard, or give valid proof that active scanners are not the preponderance.

Anyone getting wifi issues? I stay connected but can't pass any traffic

I have been having issues where i am connected to the wifi but the device stops passing any traffic. I have fing installed and i can't ping any other devices on my network. I know its just my phone because i have my work phone and tablet connected to the wifi and they still work fine browsing webpages, watching movies etc while the droid turbo can no longer communicate with the local lan or out to the internet. If i switch the wifi off then on again it will reconnect and then work normally. I can then ping devices on the local lan and access pages on the internet. This has happened a number of times now since i got the device.
Edit: I just updated the phone and still get the issue. I have a cisco WAP at home, we have cisco WAP's at work which i will test tomorrow. If this thing still has issues i am just going to swap it out for a Note 4.
Check this out:
http://forum.xda-developers.com/showthread.php?t=2925844
I've been seeing issues with Cisco wlans too.
Sent from my XT1254 using XDA Free mobile app
so it looks like it works good at work, something with my home cisco ap and this phone as all other devices at home work ok.
-magnum- said:
I have been having issues where i am connected to the wifi but the device stops passing any traffic. I have fing installed and i can't ping any other devices on my network. I know its just my phone because i have my work phone and tablet connected to the wifi and they still work fine browsing webpages, watching movies etc while the droid turbo can no longer communicate with the local lan or out to the internet. If i switch the wifi off then on again it will reconnect and then work normally. I can then ping devices on the local lan and access pages on the internet. This has happened a number of times now since i got the device.
Edit: I just updated the phone and still get the issue. I have a cisco WAP at home, we have cisco WAP's at work which i will test tomorrow. If this thing still has issues i am just going to swap it out for a Note 4.
Click to expand...
Click to collapse
Yeah this phone does not seem to like my router for some reason. Keep in mind I'm not a networking expert, but I've tried every combination of options and settings every which way from Sunday and I just can't get the thing to work. When I do connect the phone to my wifi it kills the the connection on every device in the house. At first I though it was just a wireless thing, but even the downstairs computer which is plugged in directly to the router doesn't work. Then as soon as I disconnect the phone every device works again. I thought maybe there was too many devices, so I disconnected all but the downstairs computer, still had the issue when I connected the Turbo. I've tried just turning off the WPA2 and just having an open system, I've tried connecting the phone using a WPS pin (This one actually worked for a good 5 minutes before crapping out and hasn't worked since). On the advanced options of the phone I tried an automatic IP as opposed to the default DHCP setting (This also worked for a good 5 minutes before not working ever again). I've tried limiting it to just one frequency band. I have tried so many different things and I just cannot make this phone work on my router. And I know it's my router because the phone works fine at work.
phone: Droid Turbo
Router : Asus rt-ac66r
yup within ten minutes of getting home, the device no longer passes traffic. My work S5 still works fine at home and so does my samsung tablet. The device worked on wifi all day at work on our enterprise wpa2 network no issues. I tried doing static ip at home, changing to 2.4 ghz, trying new ssid. Not sure what else to do with this thing...
Not just you
I posted a comment on Motorola's forum where people are discussing their wifi issues... And my work around. I currently beleive its a software issue and can be fixed via update. Also, today I found (it appears) that the longer the phone goes without a reboot, the shorter amount of the it appears to go with out needing the wifi card reset.
https://forums.motorola.com/comment/829632
My work around fix...
First, over night my wifes phone now behaves just like mine. It now connects to wifi and after sometime passes it no longer passes data (but stays connected). I needed a way to auto disable/enable the card... I installed Tasker. I have it set to check every 15 minutes, if the phone is connected to WiFi, to disable then enable the WiFi card. I use WifiMatic to enable the wifi card when the phone is connected to the cellular tower that is near my house. (Doing this by GPS uses more battery power...) Using Tasker with the rule to verify its connected to wifi first helps not enabling wifi if its nit needed and lets WifiMatic enable/disable it as needed.
wicketts.net

Built in tether app stopped working suddenly. SM-N910T3 6.0.1

SM-N910T3. Maximum OvrDriVE MM v1.2 (Android 6.0.1, N910TUVU2EP3)
Since this ROM was flashed on my phone, I've always used the "built in" T-Mobile hotspot app. I'm on the 10GB family share. I am not over my data cap. No unlimited tether mods, or anything like that. Just rooted with OvrDriVE rom. Nothing has changed since it was flashed in August 2016.
I use tether maybe once or twice a month in emergency situations.
Tried to connect to my work laptop, and the PC (Win 10 Dell Tablet) does see the hotspot, connects just fine, gets a DHCP assigned IP address but "no internet." If I try to ping google.com I get an immediate error. So did the normal windows stuff, restart the computer, flush DNS cache, etc. IPV6 disabled and re-enabled. No change. "Forgot" the network in WIndows, thinking something about the encryption has changed, or something. No dice. So I tried my personal laptop. Same thing. Connects, gets IP, no internet what so ever. I thought maybe it's an issue with T-Mobile's DNS servers, so I leave the device IP DHCP, but change DNS server to google's 8.8.8.8 & 8.8.4.4. Still nothing. Tried a computer that has never connected to the hotspot before. Same thing. Gets an internal IP address, but cannot connect to the internet.
Only thing I've done is wipe dalvik/cache but that did nothing. I don't have a recent backup to restore to. I haven't found the hotspot app in Application Manager, as I want to wipe data/cache for that specific app and see if that helps.
Anybody have any ideas? Or what I can do to get more information about where it is failing?
EDIT: Thought maybe i was a T-Mobile network error. When starting the hotspot, I get the popup saying "verifying you account information" and do not get any errors. It has not been working for about 4 days now so I'd think it it was an internal T-Mobile issue it'd be resolved by now, or I'd see posts from others saying it wasn't working.
So this evening I downloaded the ol' tried and true "WiFi Tether Router" and configured it per the apps' recommendations for the Note 4. That doesn't work at all, can never see the SSID of the hotspot on any computer.
try to switch your frequency of your hotspot from 4 or 5. something to 2.4 im pretty sure under hotspot settings that is my only guess.
No effect. This is just the AP mode, whether 2.4GHz or 5GHZ. As I stated the PC connects to the phone fine, gets an IP address. Something with the routing or DNS is failing. I think it goes beyond DNS as typing in a URL's IP address also doesn't work.

Setting up chromecast without WiFi

So I'm in the army right now, which means there's a TV but no WiFi available.
I did think of just setting up a Hotspot with another phone but it gets pretty annoying having to have 2 people at all time.
So I went digging in the Internet and found someone at a random forum (can't find it now for credit..), that said that If you set up the Hotspot in your own phone and configure it with another one you don't need the other one around anymore - being the Hotspot works as being connected to it.
Now I'm pretty sure there shouldn't be any reason I couldn't set it up on my own phone (the hotspot), except the Google home app just demands I connect to the WiFi network, which I can't do because you can't connect to yourself sadly.
I think if someone made some changes to the Google home app, or made an alternative set up app it could work. I have no idea how to code an app, so I came here ?
tl:dr I Want an app that does the same as the home app for setting chromecast up, but without checking if I'm connected to a WiFi network. (I think)
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Asphyx said:
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Click to expand...
Click to collapse
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
exeLz said:
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
Click to expand...
Click to collapse
Then I suggest getting the WiFi puck and adding it to your data account.
Asphyx said:
Then I suggest getting the WiFi puck and adding it to your data account.
Click to expand...
Click to collapse
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
exeLz said:
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
Click to expand...
Click to collapse
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Asphyx said:
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Click to expand...
Click to collapse
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
exeLz said:
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
Click to expand...
Click to collapse
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Asphyx said:
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Click to expand...
Click to collapse
Like I said, once the setup is done, being the Hotspot is just like being connected to is. The app still doesn't recognize you're connected but if you're on the web the chromecast icon does pop up when needed, all the third party apps do recognize you as being connected.
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Accidental post
Asphyx said:
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Click to expand...
Click to collapse
Yea I know, but sometimes friends take it or something and it's a pain in the ass to explain everything, and even when I do it means I gotta reconnect at my end again which is annoying just thought someone could maybe find a solution that sounded really simple for me, guess not, too bad..
Thanks anyway!
Well trying to recode Home is a dead end....Android wouldn't even let you install it!
You guys should just chip in and buy the puck.
It will even let you use Tablets and Laptops as well as simplify the CCast use.
I know this is an older post; not sure if you are still interested. I read all the replies and not sure what to make of it as far as if anyone had a working solution or not. No disrespect to anyone, but I couldn't tell for sure so I'm posting a link to my solution which does work. The two important steps are included. One is using " other wifi" in the drop down list when searching for your hotspot. The second is enabling GUEST MODE.
https://forum.xda-developers.com/android/help/how-to-cast-screen-android-phone-to-t4032653
I’m trying something similar with a Chromecast 3rd gen and iPhone 5S (iOS 12). Main issue seems to be guest mode doesn’t work at all on any apps, and pretty much every solution i’ve seen to this results in guest mode being used for the eventual casting. If you have android or iOS 13 then ymmv.
The only solution i’ve found are workarounds, the obvious being
1) don’t buy a chromecast (it’s not much of a solution but hey it’s $30).
2) use a secondary device to cast.
3) use a tethered travel router, and this can be done with only a phone and mobile data for internet, but there’s a catch:
First i’d Recommend any router by GLi.net (cheapest “mango” router is about $20) as they support iOS and android and both WiFi and usb tethering.
Also, i’ve Tried using a WiFi hotspot on the phone, and it’s the same issue - no connection to the chromecast regardless of how. However... iPhones will allow you to create a hotspot using *only* cables usb tethering, so if you set the router up to *only* accept internet via cables tether (turn off WiFi/repeater tethering), then you can have both the chromecast and iPhone connect to the routers WiFi, whilst providing net access to the router (and WiFi network) from the same iphone’s mobile data via usb. Simple howoto:
Important: Turn OFF WiFi on the phone, and turn off hotspot.
Connect phone to router via usb, accept trust settings.
Turn on personal hotspot, you’ll get a message asking whether to use WiFi or just usb (andbluetooth if it’s also turned on). Select just usb/Bluetooth.
Wait until blue connection bar shows on phone (if not, make sure routers setup properly to gain net via usb tethering).
Now, turn on WiFi on the phone, and connect to routers WiFi.
Setup chromecast as normal, selecting to connect to routers WiFi too.
Note turning hotspot off and on again whilst WiFi is running will start a hotspot on WiFi and disconnect you from router WiFi, so you’ll always have to go through process of turning WiFi off, turn hotspot on, turn WiFi on.
So you can do this with the right router and a usb connection to phone. Or maybe android and working guest mode. Otheriwse, ...fire tv anyone?

Unable to ping from SM-T813

I use the ComicRack PC and Android programs to sync comic files to my tablet on my home network. This generally works okay but occasionally the tablet will not connect to the server.
When this occurs, I have tried pinging from my tablet to the PC (using various android network tools like Fing) and the pings fail. In fact, when this happens I can't ping ANYTHING from my tablet, not even localhost. But my network connection is active because I can still get to both my local network files (using ES File Explorer) and the internet just fine.
I have tried resetting my wifi connections, setting static ip addresses, changing from 2.4 to 5 g networks, and a number of other things. The fact that it won't even ping localhost, however, would seem to indicate the problem is with the tablet and not the network.
After a few days (or weeks), it seems to start working again randomly - not from rebooting or anything else, it just does.
I am currently not rooted, running factory rom (see attachment). I'm considering rooting to see if I can get around the problem but since I use Private Mode I've been hesitant to do so.
Any ideas? I seem to remember reading somewhere that Samsung devices occasionally had wifi problems, but don't know if that applies to this issue.
Any help would be appreciated. Thank you.

Categories

Resources