Install Clockworkmod recovery in CM9 - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi, I recently flashed CM9 and just finished the customization so I thought I'd make a complete backup of the installation.
From what I understand, the only way to do this is with Clockworkmod recovery. This is however not installed, and when I try to install it through Rom manager it only gives me the option of installing it for the following models:
Galaxy S, S2 and Epic 4G.
Should I pick one of these models or can the correct version be downloaded from somewhere else?
I've looked around quite a bit but couldn't find the answer.
Thanks in advance!
CM-9.0.0-RC2-N7000 via Tapatalk 2

Hello Macrint, ROM Manager is incompatible with the Galaxy Note GT-N7000.
Hold the Volume Up, Home and Power buttons together simultaneously, (this will reboot your phone) let go off the buttons only when you see the Samsung Galaxy Note logo on the screen. This will take you into recovery mode.
Hopefully, it should be ClockWorkMod recovery.

CM9 already has Clockwork Recovery.

"Should I pick one of these models or can the correct version be downloaded from somewhere else?"
Never ever do such a thing.
How come CM9 does not have CWM... It is even necessary to flash CM Roms. Just get into Recovery you will see it.

Haha thanks for the quick answer! Newb mistake Just got confused since the app was there...
Ok so I booted into recovery and ran "backup to sd card". This created a folder named clockworkmod with two subfolders: backup and blobs which totals about 500mb.
If I restore from this, will the phone be exactly as it is now, with all clutter removed?
Can I also restore to that if I flash cm10 and instantly go back to cm9 or do I have to revert to cm9 and then restore?
Sorry for all the noob questions!
CM-9.0.0-RC2-N7000 via Tapatalk 2

Found the guide, I just wasn't sure what to search for
http://forum.xda-developers.com/showthread.php?t=1716511
Nice to have a clean install handy!
Thx
CM-9.0.0-RC2-N7000 via Tapatalk 2

Macrint said:
Haha thanks for the quick answer! Newb mistake Just got confused since the app was there...
Ok so I booted into recovery and ran "backup to sd card". This created a folder named clockworkmod with two subfolders: backup and blobs which totals about 500mb.
If I restore from this, will the phone be exactly as it is now, with all clutter removed?
Can I also restore to that if I flash cm10 and instantly go back to cm9 or do I have to revert to cm9 and then restore?
Sorry for all the noob questions!
CM-9.0.0-RC2-N7000 via Tapatalk 2
Click to expand...
Click to collapse
You can restore without flashing cm9. Just boot into recovery from your cm10 anytime,wipe cache and dalvik and start the restore process. As cm9 is a safe kernel.
Sent from my GT-N7000 using XDA Premium App

Related

Stuck in boot screen after CM update through Rom Manager

Got notification to update to the latest CM, clicked ok on everything, phone rebooted, now stuck on boot screen.
Can enter CWM but nothing functions, cannot choose update from SD or anything.
Please help..
(Did search, probably not good enough, but nothing came up. Am also new to the Rom Manager thing. Please don't flame if this is answered somewhere already..)
Did you make a nandroid backup? I always make one 'just in case' before I update.
firtvid20 said:
Did you make a nandroid backup? I always make one 'just in case' before I update.
Click to expand...
Click to collapse
Thanks for the quick reply!
Am not sure I did; I think it asked me if I wanted to back up the current rom and I think I clicked not to. Either way, I cannot do anything in CWM, what ever I choose gets stuck at the little hat with the arrow and I have to pull the battery.
It's not a big deal (I hope at least) to revert back to an original image, as it's my back-up phone so I don't use it daily. Hope it's easier than that though..
I would say reverting back to an original image via the passimg trick would be your best option right now (unless your bootloader is unlocked?)
danger-rat said:
I would say reverting back to an original image via the passimg trick would be your best option right now (unless your bootloader is unlocked?)
Click to expand...
Click to collapse
It is unlocked. Any magic trick..?!
EDIT: I can enter the options in CWM. Being used of the Atrix I was pressing the on/off button instead of the trackball to choose. Ffs.. Anyway, I tried wiping the data, no go; still stuck on bootscreen
I would try restoring a backup if you have one. If not, just do a wipe and clean install...
Unlocked bootloader could've been used to install a new recovery, though that now looks it was operator error... xD
danger-rat said:
I would try restoring a backup if you have one. If not, just do a wipe and clean install...
Unlocked bootloader could've been used to install a new recovery, though that now looks it was operator error... xD
Click to expand...
Click to collapse
After a bit of trial & error..fixed!! Dude, it's the 2nd time you've helped me, you should have a donation button. Now I can't buy you a beer..
THANKS!!!!
You're welcome!
I have all the beer I need, but thanks for the offer!! xD
I have kind of the same issue but I am still stuck..
I have an unlocked bootloader and rooted atrix, everything was fine until I installed gingerblur through the cwm ( I chose to install from the sd card ), once I did that it finished what it was doing then I used the reboot feature through cwm. My phone is now not moving past the motorola dual core screen. It still says unlocked at the top left and I can still enter cwm and fastboot. I have read alot about trying to flash through fastboot, but I am sorry I am a newb and do not know how to flash through fastboot. I am desperate for help... any help would greatly be appreciated.
If you can still access recovery, I would try a full wipe and instal again...
Thank you for your response... I did as you said and wiped everything... found a .zip file for android 2.3.4 gingerbread and installed that through cwm. I now have a new question... what is the best way to create a nandroid backup?? I went in android recovery mode on the boot screen and proceeded to backup through the menus and saved it to my external sd card... the only problem is that when I tried to restore back to the backup I made before it kept giving errors while trying to install the backup file. Any ideas how I can successfully create a android backup on this ATRIX 4g??
Sent from my MB860 using XDA App
You can start by going to the atrix forum and not the nexus one.
Sorry... just downloaded xda app and new to it.
Sent from my MB860 using XDA App

[Solved] Recovery 5.0.2.6 samurai..........

Ive got a stock 2.2? froyo captivate and did the new [Guide] How To flash Captivate ROMs from Stock by TRusselo and when i go into recovery i cant access external sd. I put the latest nightly and gapps on the root of sd card and for some reason I cant see it? I did a clean wipe and everything. Is there something wrong that I'm doing. I've mounted everything and still nothing.
Read the instructions again INTERNAL SD not EXTERNAL and you can access it, browse sdcard to /external_sd folder, it takes you to your external sd.
you mounted what? why? dont.
BUT YOU CANT FLASH FROM EXTERNAL SD!!!!
thats why the instructions say INTERAL SD
So instead of downloading through the browser.....I'd like to move the new nightly and gapps on internal memory with a pc transfer....where would i put it in? so that CWM can see it? Thxs man. I appreciate it. noober here. htc aria was a breeze to root and flash custom roms, I'm not use to this puppy.
ANYWHERE internal sd in the root, or any folder (except external_sd)
what browser are you using? the stock brower downloads to sdcard/downloads not sdcard/external_sd/*whatever*
if you downloaded with stock browser it should be there... not in root. unless you moved it after.
Thanks so much..... I found the files I needed but when I try to flash nightly it gives me this craziness....what's going on! Thxs for the help though.
edit: Did a factory one click by odin.
seems like an error with the zip file. try a nightly from a day or two before.
The build prop doesn't match the built asserts in the Zip, they have to match for it to flash... what ROM are you currently on?
Sent from my I897 using xda premium
that would make scene by the error. hmm he said he went to stock odin one click...
which odin one click?
Maybe he just did that...
Sent from my I897 using xda premium
So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.
tommyguns818 said:
So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.
Click to expand...
Click to collapse
Just clear ROM managers data and then flash the original Captivate CWM not MTD and the reboot into recovery... reinstall packages 2 times, and flash in CWM
Sent from my I897 using xda premium
Thanks for the fast reply. I bought ROM manager premium and will try it out. Install twice I guess to be on the safe side right? Thanks again. My wife hates my life right now being i've spent all day doing this. So i'm down to try anything on her cappy at this point.
Not "to be on the safe side"...the first time you choose reinstall packages in stock recovery it'll boot back into stock recovery, then reinstall packages again and it'll boot into cwm.
yeah thats a must do.
So i've cleared cache and selecting captivate recovery galaxy s 2.5.1.x booted into recovery ROM manger and did reinstall twice and got this.......I don't understand why i'm getting this.
Edit: I got it to work! I kept trying to go through the recovery from ROM manager after installing and it hung up a couple times. Then when selecting install packages with which I did it twice...it was in cwm 2.5.1.7. Installed nightly after full wipe a couple times and it boot looped. Then if I remember correctly I pulled battery booting into recovery, the 3 button way. it booted into Cwm 5.x.x.x. What the heck!!! That was a fun ride, why did it do this? Anyways, glad to join your guys community. you guys are awesome. Thanks buttons hit. changing first post and thread to.....solved.
When you flashed the nightly it contained a kernel with cwm 5 baked into it.
from what i have heard sometimes the cm install needs to be done twice.. too. i dunno dont mess with cm7
Sorry
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!
ShahX said:
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!
Click to expand...
Click to collapse
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.
BWolf56 said:
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.
Click to expand...
Click to collapse
Thankyou Soo Much For your Reply Bro, But Can you please guide me in detail like what Exactly Should I do with My Phone, I can Use my phone its wont let me boot into menu I just stuck on Samsung logo, and As TRusselo Guided in his tutorial I have to put any ROM.Zip into INTERNAL SDCARD (Phone Memory) and I can't do that until my phone boot's up properly! right? so Can you please help me out like what Should I do to get it working and THEN trying again to Update it with Hellybean
Once Again thankyou for your kind Reply!

Experiencing Boot Loop... Need some assistance

Intro
Hi guys, I just got my Galaxy Ace from my mom a month ago(She used it for a couple of months but was too "complex" for her that's why she just gave it to me). Anyway, I'm the type of person who wants to explore and unlock the full potential of things. The first thing I did when I received the phone was research about stuff like how to modify it, etc. I was able to successfully root(there's a "super user" icon in the menu) it. Today, I thought it'd be nice to add some metro ui theme on it. So I I downloaded 7 launcher from the play store. But, was not satisfied because it felt like it was only a "skin" and didn't changed the overall feeling of the phone. That's the time I started digging dipper into the realm of Android and came across this thing called "ROM"....
I followed an online guide on how to install roms. First, i downloaded the rom i wanted(it's called "WP7") and placed it at the root of my sd card. Just like what the tutorial suggested(in case something goes wrong), I made a "nandroid" with the use of Clock Work Mod. I then saved a copy of the nandroid into my computer just to be EXTRA safe. Everything seems to be in order so I proceeded with the operation. I accessed the recovery menu, and selected "wipe cache partition" and "wipe data/factory reset". After that, I went to "install zip from sd card" and selected the zip file. Everything went well. After the update, I rebooted the phone and it was successful.
The Problem
I checked the whole new ui design and it was what I expected it to be. But then, I immediately missed the old ui, so i decided to go back to the stock os/kernel/(whatever you guys call it ). I went to the recovery menu and selected "backup and restore". I chose the nandroid I just made through CWM. After loading, I rebooted my phone and bam... this is where my problem is. The Phone's name and model number appears in the screen but it's not loading. I waited for 2 minutes and nothing happened. So I restarted the phone by holding the power button and volume up. I accessed the recovery menu again and examined if I missed a step. After browsing the net, I concluded that I didn't wipe the cache and data before restoring . So I wiped both cache partition and data. I selected the nandroid and then rebooted the phone again. But, the boot loop is still there . I tried it again and again. Wiping, Restoring Rebooting. But the boot loop won't go away.
So I wiped it again but this time, I didn't select the nandroid and instead I went back to the new WP7 rom i just downloaded. My phone didn't do a boot loop and my phone is okay now. I'm stuck with my new rom for about an hour now. I'm starting to get used to it. Anyway, even though things are stable now and i'm on my new rom, I think it's still nice to go back to the phone's original kernel/os . Any ideas on how I can restore back my phone to the original/stock kernel/os without experiencing the boot loop? Or can you give me the causes why I'm experiencing the boot loop? My guess is, I think there's a problem with the nandroid I used. The wp7 rom doesn't experience any boot loop but when it comes to my nandroid, there's a boot loop.
Thanks in advance and sorry if it's too long to read. I just wanted it to be accurate and clear for you guys .
The only way would be flashing through Odin.
Enviado desde mi GT-S5830L usando Tapatalk 2
Search for your previous ROM around and flash it.
Here's a good TUTORIAL on how to flash ROMs
The only way to flash a stock rom is odin (its a pc program) .
after you flash back to stock, you should Be able to restore your nandroid backup without getting the bootloop
(at least, i'm pretty sure, can someone confirm this?)
Im sure ull find a guide on how to use odin somewhere on xda.
Sent from my GT-S5830 using xda premium
AaronvAce said:
The only way to flash a stock rom is odin (its a pc program) .
after you flash back to stock, you should Be able to restore your nandroid backup without getting the bootloop
(at least, i'm pretty sure, can someone confirm this?)
Im sure ull find a guide on how to use odin somewhere on xda.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Yea..u are correct..if it was a successful backup(without any errors)...then no problem in falshing nandroid backup after using odin
Best of luck
Sent from my GT-S5830 using xda premium
U need chainfire app to convert filesystem to rfs ... before returning to a backup of a stock rom! Otherwise u need a factoy reset from stock recovery
Hey guys. I came across a rom called stocklite and I was able to successfully install it. My new rom seems to speed up my phone and prolong its battery life. All of the bloatware that came with the stock os isn't present this rom. I don't think i'll be returning to the original stock os. So yeah, I appreciate all your help and cheers to everyone
is your keyboard ok in stocklite ROM
I can't type alphabets in 3*4 mode .
Now using s3 evolution beta3
Sent from my GT-S5830 using xda app-developers app
B A D R I said:
is your keyboard ok in stocklite ROM
I can't type alphabets in 3*4 mode .
Now using s3 evolution beta3
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
The keyboard's working fine for me.
in my keypad it shows alphabet but when I type it shows numbers in screen. . Fed up so flashed back to s3 evolution beta 3 ultimate
Sent from my GT-S5830 using xda app-developers app
SunSleeper said:
Intro
...Any ideas on how I can restore back my phone to the original/stock kernel/os without experiencing the boot loop? Or can you give me the causes why I'm experiencing the boot loop?...
Click to expand...
Click to collapse
I know you're happy with your current ROM but just an FYI, I went through a similar process trying to unlock a T-Mo Samsung Dart T499 (similar to Mini/Galaxy Ace). I just flashed stock ROM via ODIN and it boot looped on me. After reading this post I went into stock recovery and clear cache partition and factory reset and voila!
So this post actually inspired me a bit! Haha! Thanks!
as already said, the batter way to solve that problem is clean up your device is flash a stock rom with Odin,
but then, you will need remake root, and install a CWM....
good Luck !!

[Q] Can't restart after installing Cyanogenmod 10

Hello everyone,
I downloaded CM10 alpha 5 from ivendor and put it on my internal sd card.
In the post it said flash the update.zip and gapps.zip files, but I only had the whole cm10 zip file.
I installed that but it didn't work and now I'm stuck in the clockworkmod.
I think I didn't read well enough, so can you tell me what I did wrong?
I guess I should try another ROM, but is it even possible to put one on your sd card when the phone doesn't start?
Thanks alot,
Bob
You made a backup before you flashed it?
If you did, restore it and reboot your phone, i think you did something wrong, if you downloaded the good file you just flash update it and it will reboot normally, be sure its a .Zip file
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
So for some reason, some phones naturally bootloop in recovery when trying to install CM10.
Did it say installing, then stop, reboot and bootloop in recovery?
If it did, DO NOT PANIC. Everything is fine. Sometimes the phone needs to do that to install an updated recovery. If that did happen, just take out the battery and reinsert it, reboot into recovery. Flash the same CM10 again, then Gapps.
But just as a failsafe, if you want to flash back to 2.3.6 (I'm sorry, I don't know what it is for the I9001) through odin with dbsdata.rfs (due to data partition differences between stock and CM10). Just in case you want to start completely over.
Sent from my GT-I9000
Bobb95 said:
Hello everyone,
I downloaded CM10 alpha 5 from ivendor and put it on my internal sd card.
In the post it said flash the update.zip and gapps.zip files, but I only had the whole cm10 zip file.
I installed that but it didn't work and now I'm stuck in the clockworkmod.
I think I didn't read well enough, so can you tell me what I did wrong?
I guess I should try another ROM, but is it even possible to put one on your sd card when the phone doesn't start?
Thanks alot,
Bob
Click to expand...
Click to collapse
hi it say to flash the "update.zip", do u think u should of flashed the cm10 file u downloaded instead?
i am only new to experimenting with my phone myself and nearly made that mistake. have u got any further with this problem anyway?
you Just have to do a wipe factory / flash upgrade.zip / flash gapps / reboot
if you do a wipe factory, you will lose your data. but this is a safe method to move from a old rom to a new one
Sent from my GT-I9000 using xda app-developers app
Flash the same file you flashed when updated the recovery
Sent from my GT-I9000 using xda app-developers app

[Q] P7320 trouble

Hi
I have a p7320 which I am trying to install a custom ROM to, and I am having some trouble.
I used this guide: http://forum.xda-developers.com/showthread.php?t=1569122
1: flashed cwd through odin
2: flashed superuser through cwm
All fine until now
3: then I flashed the kernel from the same site through cwm
4: bootloop
I didnt take backup, so I couldnt nandroid back
I couldnt turn the device on, so I couldnt transfer another kernel
There were no "mount USB" in cwm so I couldnt transfer the files there either.
I was able to go into download mode, and I flashed the only stock rom I could find in .tar (flashable through odin)
from here: http://androidromupdate.com/2012/12/12/u-s-att-samsung-galaxy-tab-8-9-lte-sgh-i957-android-4-0-4-ice-cream-sandwich-update-finally-arrives/
flashing went fine and the tab booted.
Now I went back and flashed cwm again through odin, but when I was going to place superuser and the new rom on the sdcard.... there is no room on the tab.
In explorer it says : 0 byte available out of 26.9MB
This tab is 16GB.... what happened?
I cant transfer files to it, so the only thing I can flash is the .tar files through odin.
please help
panelovn said:
In explorer it says : 0 byte available out of 26.9MB
This tab is 16GB.... what happened?
I cant transfer files to it, so the only thing I can flash is the .tar files through odin.
please help
Click to expand...
Click to collapse
Hmmm, this is usually a sdcard mount thing
so maybe all you have to do is reboot to CWM do a format /sdcard from mount and unmount section in CWM
then reboot to system and see if the problem still there
omarainea said:
Hmmm, this is usually a sdcard mount thing
so maybe all you have to do is reboot to CWM do a format /sdcard from mount and unmount section in CWM
then reboot to system and see if the problem still there
Click to expand...
Click to collapse
Hi
There is no such thing as format/sdcard in that section.
Only format/cache, format/data and format/system
panelovn said:
Hi
There is no such thing as format/sdcard in that section.
Only format/cache, format/data and format/system
Click to expand...
Click to collapse
this probably means that your CWM version is old [5.5.0.4 I guess]
I don't know if your tab has a newer CWM cuz my tab is p7300,
so try to find a newer one or even try TWRP instead, cuz it also has sdcard format function
one little thing, you said your tab is P7320 and yet you have installed a SGH-I957 ROM {read it from your link}
I honestly don't know the deference between the two devices
what I'm trying to say is: maybe the problem is because you're using a ROM for a different device
so maybe you should try THIS [the latest ICS Odin tar samsung framework for P7320]
I have a p7320 and I am using this ROM.
http://forum.xda-developers.com/showthread.php?t=2554877
Fast, no bloatware, no freezing.
I followed the instructions no problems. My recovery UI has an option partition SD card under advanced. Dont know if that will help you.
Sent from my GT-P7320 using XDA Premium HD app
Hi
I was able to download another .tar full stock rom which I flashed with odin.
Worked out fine, and the memory of the SD card is back.
However... I once again flashed cwm and superuser, then i tried the rom you are linking to but the tab wont boot with it
Its just stuck with a black screen after the logo.
Now I have reflashed the stock rom with working sd card
Sorry about that. I remember I had a black screen for a few minutes but eventually it booted. The developer also pointed out boot animations are missing
Sent from my GT-N7100 using XDA Premium HD app
panelovn said:
Hi
I was able to download another .tar full stock rom which I flashed with odin.
Worked out fine, and the memory of the SD card is back.
However... I once again flashed cwm and superuser, then i tried the rom you are linking to but the tab wont boot with it
Its just stuck with a black screen after the logo.
Now I have reflashed the stock rom with working sd card
Click to expand...
Click to collapse
Hi,
I'm the developer working on the CM10 ROM for the P7320 - yes, the first boot might take a while, and it doesn't show a boot animation, so it might look like it's crashed. But I have tested going from the stock ICS image to my ROM a few times and it seems to work fine, eventually. Perhaps you could give it another go and see?
Cheers.
CL0SeY said:
Hi,
I'm the developer working on the CM10 ROM for the P7320 - yes, the first boot might take a while, and it doesn't show a boot animation, so it might look like it's crashed. But I have tested going from the stock ICS image to my ROM a few times and it seems to work fine, eventually. Perhaps you could give it another go and see?
Cheers.
Click to expand...
Click to collapse
Hi
I will definetely give it another go this evening
Can i flash superuser, your rom and gapps in one go? Or do I have to boot it in between?
thank you for your answer
The ROM should have super user already, so you shouldn't need that. You can do the ROM and gapps together.
I tried again, and this time it worked like a charm!
Thank you!
panelovn said:
I tried again, and this time it worked like a charm!
Thank you!
Click to expand...
Click to collapse
What am I doing wrong. My device starts to cyanogenmod boot animation but not further.
Do I have to do the dalvik wipe and cache wipe?
I think i have tried everything. It's been rolling boot animation about 30 minutes now.
Sorry about my bad language.
And thank you for your answers.
I dont have a solution. Is this the first time you use this ROM? One time I wanted to revert to stock to check something and I got an everlasting Samsung animation until I did a factory reset from recovery. Did you try factory reset?
Sent from my GT-P7320 using XDA Premium HD app
hondax said:
I dont have a solution. Is this the first time you use this ROM? One time I wanted to revert to stock to check something and I got an everlasting Samsung animation until I did a factory reset from recovery. Did you try factory reset?
Sent from my GT-P7320 using XDA Premium HD app
Click to expand...
Click to collapse
Hi,
Now i tried with factory reset and it worked fine this time. And it was the first time.
Thank you

Categories

Resources