I think I may have soft bricked my HTC Raider.
I was attempting to flash CM9 on my HTC. I followed the pre-flash procedures (Wiping Data, etc). Then, once it was complete, I rebooted the phone. The phone could not get past the CM9 Blue Tunnel animation. I left it there for about an hour, but nothing happened. I can still access my recovery and bootloader. I have tried flashing another ROM, as well as restoring a Nandroid backup I made, but they all lead to the white HTC screen. My Raider has S-ON.
User MzzSarahx3 had an extremely similar case, except that person had an AT&T Vivid, as seen here:
http://forum.xda-developers.com/showthread.php?t=1416836&page=51
MzzSarahx3 managed to fix the problem by running an RUU, so that is why I believe I can fix my situation by doing the same. I am aware of the RUU Collection that Football uploaded, but clicking on a link on FileFactory will give me an error saying that all download slots are in use.
So could somebody please link me, or upload, an ICS RUU for the HTC Raider on Rogers? Help would be much appreciated.
Just means site is busy keep checking
Sent from my HTC PH39100 using xda premium
ronnie498 said:
Just means site is busy keep checking
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
I have been clicking on that link since this morning. And it still gives me the same message. I will continue to check, though.
Does anyone have an alternate solution?
The stock Bell ICS RUU should work fine on your Rogers Raider. ( I have a Bell Raider but installed it on my buddy's Rogers Raider).
I'm uploading the stock Bell ICS RUU to Depositfiles right now but its gonna take an hour. I'll update my post with the link when it's done.
You can probably find the stock Bell ICS RUU on various threads in the forum. I believe that's where I got it from originally.
Note that if you have unlocked your bootloader (via htcdev), the stock RUU will refuse to install !
LaZiODROID said:
The stock Bell ICS RUU should work fine on your Rogers Raider. ( I have a Bell Raider but installed it on my buddy's Rogers Raider).
I'm uploading the stock Bell ICS RUU to Depositfiles right now but its gonna take an hour. I'll update my post with the link when it's done.
You can probably find the stock Bell ICS RUU on various threads in the forum. I believe that's where I got it from originally.
Note that if you have unlocked your bootloader (via htcdev), the stock RUU will refuse to install !
Click to expand...
Click to collapse
Thank you very much for uploading it!
I am definitely looking forward to using my phone again!
BTW I have looked around for the Bell ICS RUU on these forums, but did not find anything. The closest thing I found was this:
http://forum.xda-developers.com/showthread.php?t=1672800&highlight=bell+ics+ruu
But they said it was not a RUU so.....
I have uploaded the Bell ICS RUU to DepositFiles. You're welcome!
Filename: RUU_HOLIDAY_ICS_35_S_BM_3.38.666.2_Radio_3.04.4740.11_34.29.701040.22_release_255916_signed.exe
http://depositfiles.com/files/ofalwm57q
LaZiODROID said:
I have uploaded the Bell ICS RUU to DepositFiles. You're welcome!
Filename: RUU_HOLIDAY_ICS_35_S_BM_3.38.666.2_Radio_3.04.4740.11_34.29.701040.22_release_255916_signed.exe
Click to expand...
Click to collapse
Umm, well I downloaded the RUU file you kindly uploaded, but I have encountered a problem.
ERROR [131]: CUSTOMER ID ERROR
I have tried many times. Got this error every time. I guess it is because I have a Rogers phone and attempting to update using a Bell RUU.
Any suggestions?
LeoCFZ said:
Umm, well I downloaded the RUU file you kindly uploaded, but I have encountered a problem.
ERROR [131]: CUSTOMER ID ERROR
I have tried many times. Got this error every time. I guess it is because I have a Rogers phone and attempting to update using a Bell RUU.
Any suggestions?
Click to expand...
Click to collapse
Damn... I don't remember having to do that for my buddy's Rogers Raider. Sorry.. it was some time ago.
He's here so I just checked his phone... we must have put in the SuperCID back then (which may accept any RUU?)
C:\Users\Master>fastboot getvar cid
cid: 11111111
finished. total time: 0.000s
and I ran mine (actual Bell Raider).:
C:\Users\Master>fastboot getvar cid
cid: BM___001
finished. total time: 0.000s
Feeling adventurous? I'm not sure if you need to be S-OFF to do this (or have unlocked bootloader, or even both) but...
You can change the CID via fastboot.
Fastboot commands that you can do: (thank you jmone from showpost.php?p=25187040&postcount=199)
(to check your current CID - write it down?)
fastboot getvar cid
(to write a new CID to the phone)
fastboot oem writecid 11111111 (where the 11111111 contains the CID you want - you can try the 11111111 (is that known as SuperCID?) or you can try mine, which is BM___001 as specified above)
(then reboot into bootloader mode)
fastboot reboot-bootloader
(then if it reboots back into fastboot mode, you can run this to verify your desired CID made it)
fastboot getvar cid
Then maybe the RUU will allow itself to install?
LaZiODROID said:
Damn... I don't remember having to do that for my buddy's Rogers Raider. Sorry.. it was some time ago.
He's here so I just checked his phone... we must have put in the SuperCID back then (which may accept any RUU?)
C:\Users\Master>fastboot getvar cid
cid: 11111111
finished. total time: 0.000s
and I ran mine (actual Bell Raider).:
C:\Users\Master>fastboot getvar cid
cid: BM___001
finished. total time: 0.000s
Feeling adventurous? I'm not sure if you need to be S-OFF to do this (or have unlocked bootloader, or even both) but...
You can change the CID via fastboot.
Fastboot commands that you can do: (thank you jmone from showpost.php?p=25187040&postcount=199)
(to check your current CID - write it down?)
fastboot getvar cid
(to write a new CID to the phone)
fastboot oem writecid 11111111 (where the 11111111 contains the CID you want - you can try the 11111111 (is that known as SuperCID?) or you can try mine, which is BM___001 as specified above)
(then reboot into bootloader mode)
fastboot reboot-bootloader
(then if it reboots back into fastboot mode, you can run this to verify your desired CID made it)
fastboot getvar cid
Then maybe the RUU will allow itself to install?
Click to expand...
Click to collapse
I typed in the commands and I got this:
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot oem writecid 11111111
... INFOvreg_set: request is duplicated id 14
INFO holiday_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 1.076s]
finished. total time: 1.076s
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot getvar cid
cid: ROGER001
finished. total time: 0.002s
So, that means the SuperCID did not manage to write. I searched around and found hints about something called Radio S-OFF or Gold Card, but it was for a different HTC phone...
Is there a guide to follow so i could get this?
BTW SuperCID would allow the user to use any RUU.
LeoCFZ said:
I typed in the commands and I got this:
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot oem writecid 11111111
... INFOvreg_set: request is duplicated id 14
INFO holiday_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 1.076s]
finished. total time: 1.076s
c:\Users\Leo Zheng\Desktop\Vivid Toolkit\Data>fastboot getvar cid
cid: ROGER001
finished. total time: 0.002s
So, that means the SuperCID did not manage to write. I searched around and found hints about something called Radio S-OFF or Gold Card, but it was for a different HTC phone...
Is there a guide to follow so i could get this?
BTW SuperCID would allow the user to use any RUU.
Click to expand...
Click to collapse
Ahhh.. so you need to be S-OFF it seems. The S-OFF procedure isn't super easy, but it's nice to have (because with S-OFF, the custom roms you install will be able to automatically flash their kernel. With S-ON, to run a custom rom, you need to flash the kernel separately... not a huge deal, but having S-OFF is convenient if you like to try different custom roms). To S-OFF, you have to be willing to void your phone's warranty.
Theres gotta be the Roger RUU out there somewhere (that is ICS). I have the Rogers Gingerbread RUU... but I think it will only work if you havent upgraded your phone to ICS yet...
LaZiODROID said:
Ahhh.. so you need to be S-OFF it seems. The S-OFF procedure isn't super easy, but it's nice to have (because with S-OFF, the custom roms you install will be able to automatically flash their kernel. With S-ON, to run a custom rom, you need to flash the kernel separately... not a huge deal, but having S-OFF is convenient if you like to try different custom roms). To S-OFF, you have to be willing to void your phone's warranty.
Theres gotta be the Roger RUU out there somewhere (that is ICS). I have the Rogers Gingerbread RUU... but I think it will only work if you havent upgraded your phone to ICS yet...
Click to expand...
Click to collapse
I also have the Gingerbread RUU and yes, it does not work. You were right about the ICS RUU out there somewhere.
I dug deeper into the comments of Football's thread on the Shipped RUU Collection to see if anyone had trouble downloading from FileFactory and somebody requested the Rogers ICS RUU mirror there. I downloaded it any now my cell is back to being operational!
http://forum.xda-developers.com/showthread.php?t=1338919&highlight=football&page=14
Thanks to LaZiODROID, ronnie498,and Gene Poole for all their help!
Well, I also like to make sure I don't make the same mistake again. Anyone know why my phone ended up the way it is?
LeoCFZ said:
I also have the Gingerbread RUU and yes, it does not work. You were right about the ICS RUU out there somewhere.
I dug deeper into the comments of Football's thread on the Shipped RUU Collection to see if anyone had trouble downloading from FileFactory and somebody requested the Rogers ICS RUU mirror there. I downloaded it any now my cell is back to being operational!
http://forum.xda-developers.com/showthread.php?t=1338919&highlight=football&page=14
Thanks to LaZiODROID, ronnie498,and Gene Poole for all their help!
Well, I also like to make sure I don't make the same mistake again. Anyone know why my phone ended up the way it is?
Click to expand...
Click to collapse
Amazing! Glad it worked out. Thanks for that link. I'll be archiving a copy of that Rogers RUU.
As for why your phone wouldnt boot with CM9... Is CM9 still in development? Maybe you should try a different ROM.
I'm using Pegasus right now and enjoying it. (As per kozmik I did have to do an extra step to get my LTE going, but it was pretty easy).
Remember to do a backup and your 4 wipes (data, cache, dalvik,and /system) before you install the rom, of course!
OK, thanks for the tips and the ROM suggestion.
I'll try Pegasus next.
LeoCFZ said:
OK, thanks for the tips and the ROM suggestion.
I'll try Pegasus next.
Click to expand...
Click to collapse
Thanks for this post. I had the same problem and was looking on the site to find an answer....
I uploaded all the RUU's here including the rogers one
http://forum.xda-developers.com/showthread.php?t=2013122
from my HTC PH39100 using xda premium
Here's today's brain teaser of a question: if you have Super CID on, do you need to have the bootloader re-locked in order to run any RUU?
Spazmogen said:
Here's today's brain teaser of a question: if you have Super CID on, do you need to have the bootloader re-locked in order to run any RUU?
Click to expand...
Click to collapse
Yes, I am pretty sure you do. I re-locked mine whenever I had to use a RUU.
Related
Hello
I have researched alot but didn't get my answer. There are alot of threads on this but still no luck.
I have a bell htc incredible S that came with s-off. I rooted through alpharx and flashed a custom rom of core droid.
Rom: http://forum.xda-developers.com/showthread.php?t=1096056
Everything works great except there is no call sound. I am trying to update the radio provided in the link above but I keep getting "model id incorrect" error.
Idk if I am flashing it properly or missing something in the process. Can someone please help I am new to this.
I put PG32IMG.zip file into K:\PG32IMG.zip and ran through Fastboot.
Thanks in advance
humm
umer215 said:
Hello
I have researched alot but didn't get my answer. There are alot of threads on this but still no luck.
I have a bell htc incredible S that came with s-off. I rooted through alpharx and flashed a custom rom of core droid.
Rom: http://forum.xda-developers.com/showthread.php?t=1096056
Everything works great except there is no call sound. I am trying to update the radio provided in the link above but I keep getting "model id incorrect" error.
Idk if I am flashing it properly or missing something in the process. Can someone please help I am new to this.
I put PG32IMG.zip file into K:\PG32IMG.zip and ran through Fastboot.
Thanks in advance
Click to expand...
Click to collapse
try this thread
http://forum.xda-developers.com/showthread.php?t=1129014&highlight=radio
maybe your flashing a froyo radio on ginger bread?>
^^^^ thanks
I am flashing a GB radio and I already looked at that link but still no luck. Idk if I have a radio s-off. How to check that? I was on froyo before I got custom coredroid and I never touched radio.
AlphaRevX doesn't give you radio S-OFF, that's why you're having problems.
doctorsax said:
AlphaRevX doesn't give you radio S-OFF, that's why you're having problems.
Click to expand...
Click to collapse
Can u please post a link on how to get radio s-off? I searched around but couldnt find any. My phone is unlocked tho.
umer215 said:
Hello
I have researched alot but didn't get my answer. There are alot of threads on this but still no luck.
I have a bell htc incredible S that came with s-off. I rooted through alpharx and flashed a custom rom of core droid.
Rom: http://forum.xda-developers.com/showthread.php?t=1096056
Everything works great except there is no call sound. I am trying to update the radio provided in the link above but I keep getting "model id incorrect" error.
Idk if I am flashing it properly or missing something in the process. Can someone please help I am new to this.
I put PG32IMG.zip file into K:\PG32IMG.zip and ran through Fastboot.
Thanks in advance
Click to expand...
Click to collapse
Hi i to have a Bell HTc incredible S, and could not flash a new radio, and could not get methods already outlined to work, so i did this method...
go here http://forum.xda-developers.com/showthread.php?t=1070348, follow this guide to install eng hboot then,
extract radio.img
Copy radio.img to a location where fastboot can find it. (wherever adb is)
Boot your phone into fastboot mode (power on while holding down the volume key)
Connect your phone via usb to your pc/mac/...
fastboot devices (to make sure that fastboot "sees" your phone)
fastboot flash radio radio.img
Code:
D:\SDK>adb shell
# busybox md5sum /sdcard/vivo_enghboot.img
busybox md5sum /sdcard/vivo_enghboot.img
b1829cfb7cf5d462660a58aa5449d27c /sdcard/vivo_enghboot.img
# dd if=/sdcard/vivo_enghboot.img of=/dev/block/mmcblk0p18
dd if=/sdcard/vivo_enghboot.img of=/dev/block/mmcblk0p18
2048+0 records in
2048+0 records out
1048576 bytes transferred in 0.552 secs (1899594 bytes/sec)
# reboot bootloader
reboot bootloader
D:\SDK>fastboot flash radio radio.img
sending 'radio' (25472 KB)...
OKAY [ 5.347s]
writing 'radio'...
OKAY [ 4.844s]
finished. total time: 10.194s
That's what I'm saying - your phone has an unlocked HBOOT (bootloader) but the radio is still locked. There is at least one thread on the forum here explaining how to flash a radio manually. Radio S-OFF can only be achieved using a hardware solution like an XTC clip, as far as I know.
test this out?
doctorsax said:
That's what I'm saying - your phone has an unlocked HBOOT (bootloader) but the radio is still locked. There is at least one thread on the forum here explaining how to flash a radio manually. Radio S-OFF can only be achieved using a hardware solution like an XTC clip, as far as I know.
Click to expand...
Click to collapse
can some one test out ali3nfr3ak method is it possible with soft ware S-OFF to manually flash a radio
^^^
I tried but I keep getting "permission denied" error when I enter "su" and I cant get a # sign in the process of Ship S-OFF to ENG S-OFF.
I am new to this forums so I cant post in the development section.
I cant get Ship S-off to ENG-Soff. I also have a question
If I get ENG S-OFF, will my phone become a Radio S-OFF. How do I check if my phone is Radio S-off or Radio S-on?
Thanks guys
umer215 said:
^^^
I tried but I keep getting "permission denied" error when I enter "su" and I cant get a # sign in the process of Ship S-OFF to ENG S-OFF.
I am new to this forums so I cant post in the development section.
I cant get Ship S-off to ENG-Soff. I also have a question
If I get ENG S-OFF, will my phone become a Radio S-OFF. How do I check if my phone is Radio S-off or Radio S-on?
Thanks guys
Click to expand...
Click to collapse
Ok so either the rom u r using does not have root permissions, or maybe you are not allowing root permissions on your phone when you type "su" in adb shell, ... what i mean is, after typing "su" in adb shell, on your phone a popup should appear asking for root permissions. U need ROOT permissions and busybox installed to flash eng-boot.
MY phone came shipped to me with s-off, i didnt use an xtc clip.
ali3nfr3ak said:
Ok so either the rom u r using does not have root permissions, or maybe you are not allowing root permissions on your phone when you type "su" in adb shell, ... what i mean is, after typing "su" in adb shell, on your phone a popup should appear asking for root permissions. U need ROOT permissions and busybox installed to flash eng-boot.
MY phone came shipped to me with s-off, i didnt use an xtc clip.
Click to expand...
Click to collapse
Hey bro thanks for ur help
ur method is amazing. Now finally i got Eng S-off and GB radio 20.2804.30.085AU_3805.04.03.22_M. currently, I am using froyo so I have no call sound that means I have got a GB radio and I just need to put back coredroid rom.
Thanks again
jul644 said:
can some one test out ali3nfr3ak method is it possible with soft ware S-OFF to manually flash a radio
Click to expand...
Click to collapse
yes his method did work sorry for the other post
umer215 said:
Hey bro thanks for ur help
ur method is amazing. Now finally i got Eng S-off and GB radio 20.2804.30.085AU_3805.04.03.22_M. currently, I am using froyo so I have no call sound that means I have got a GB radio and I just need to put back coredroid rom.
Thanks again
Click to expand...
Click to collapse
Sweet. Nice one, well done.
once you have flashed the radio, there is no need for the "eng-hboot" so if you were feeling confident...
download the attached zip.
extract and place hboot_1.13.0000_CRC_8a731c6e_0401.img [MD5=C0845E6348123828F918FDB48B74F349] in the same place you put the radio.img
Boot your phone into fastboot mode (power on while holding down the volume key)
Connect your phone via usb to your pc/mac/...
fastboot devices (to make sure that fastboot "sees" your phone)
fastboot flash hboot hboot_1.13.0000_CRC_8a731c6e_0401.img
Code:
C:\Users\Administrator>d:
D:\>cd sdk
D:\SDK>fastboot devices
HT15GTA00*** fastboot
D:\SDK>fastboot flash hboot hboot_1.13.0000_CRC_8a731c6e_0401.img
sending 'hboot' (1024 KB)...
OKAY [ 0.411s]
writing 'hboot'...
OKAY [ 0.421s]
finished. total time: 0.832s
Will flashing ENG HBOOT onto a AlphaRevX'd S-OFF phone cause it to go back to S-ON?
charch said:
Will flashing ENG HBOOT onto a AlphaRevX'd S-OFF phone cause it to go back to S-ON?
Click to expand...
Click to collapse
Well that i do not know %100. I wouldnt think so tho. I cannot test this for you as I didnt need to use AlphaRevX to s-off
It kinda worries me though... If I get ENG HBOOT and it returns to S-ON then would there be a way to S-OFF it again? Or would I be stuck forever?
Sent from my HTC Incredible S using XDA App
charch said:
It kinda worries me though... If I get ENG HBOOT and it returns to S-ON then would there be a way to S-OFF it again? Or would I be stuck forever?
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
Well there is only one way to find out, All I can say is that my phone came with s-off, flashing the eng-hboot did not return me to s-on, the eng-boot is an engeering hboot so i dont see that it would return to s-on
EDIT: this from your other thread..
vimfreak said:
Flashing RUU will return S-ON.
I've S-OFF my phone with alpharevx and then flashed official GB RUU - phone was S-ON again.
However its not a big deal since you can use alpharevx trick again - phone will be S-OFF again (worked for me)
Click to expand...
Click to collapse
It depends on whether or not it checks if the hardware is S-OFF or not... Because if it does then Im screwed... But Ive looked at the Desire Z forum and they soft mod S-OFF and are able to install ENG HBOOT S-OFF... But... If it does happen to fail, since Im already rooted, wouldnt I be able to flash a HBOOT from the Optus rom or something?
EDIT: yes, but AlphaRevX relies on the stock HBOOTs to operate...
EDIT 2: did some research... ENG HBOOT is unlocked by nature... Apparently its impossible for it to revert you to S-ON xD thanks for your help
Sent from my HTC Incredible S using XDA App
works
i can confirm that this works here was my log
PHP:
C:\AndroidSDK\platform-tools>fastboot devices
HT13RTA05966 fastboot
C:\AndroidSDK\platform-tools>fastboot flash radio radio.img
sending 'radio' (25472 KB)... OKAY [ 5.328s]
writing 'radio'... OKAY [113.161s]
finished. total time: 118.490s
C:\AndroidSDK\platform-tools>
thos 118 seconds were scary
jul644 said:
i can confirm that this works here was my log
PHP:
C:\AndroidSDK\platform-tools>fastboot devices
HT13RTA05966 fastboot
C:\AndroidSDK\platform-tools>fastboot flash radio radio.img
sending 'radio' (25472 KB)... OKAY [ 5.328s]
writing 'radio'... OKAY [113.161s]
finished. total time: 118.490s
C:\AndroidSDK\platform-tools>
thos 118 seconds were scary
Click to expand...
Click to collapse
Was your phone S-OFF out of the box or did you use AlphaRevX?
EDIT: I decided to risk it and install ENG HBOOT... IT WORKED! Installing the Optus RUU!
hi guys ive been off the htc one thread for a few months and so much has happend just need some help
ive unlocked the bootloader
done S OFF
done this http://forum.xda-developers.com/showthread.php?t=2316726
my phone is a 3uk branded rom with cidnum: H3G__001 (which i changed to fastboot oem writecid 11111111)
so now ive done them basically my phone is as good as sim free (apart from the sim lock)
so if i needed to return phone i just follow steps and reinstall any stock rom (as a 3 branded one i dont think they is any)
and 3 would never know any different
thanks
A great start would be to check the other 15,000 threads covering this subject.
Is there a question in there somewhere?
brockyneo said:
hi guys ive been off the htc one thread for a few months and so much has happend just need some help
ive unlocked the bootloader
done S OFF
done this http://forum.xda-developers.com/showthread.php?t=2316726
my phone is a 3uk branded rom with cidnum: H3G__001 (which i changed to fastboot oem writecid 11111111)
so now ive done them basically my phone is as good as sim free (apart from the sim lock)
so if i needed to return phone i just follow steps and reinstall any stock rom (as a 3 branded one i dont think they is any)
and 3 would never know any different
thanks
Click to expand...
Click to collapse
I think he is asking about what he will need to do if he needs to return to stock for a phone return/exchange.
brockyneo,
Since you are s-off you can reset everything needed before returning the phone if needed.
However since there is no RUU for your device, it will be a little harder than just re-installing a stock rom. Since you flashed a modified hboot you will need to reset all your sytem stuff back like hboot, splash screen, recovery, etc before you can relock the phone so it looks the same as it did out of the box.
I won't go into all the steps needed, but just know if you need to go back to stock there are many threads here that detail how to do so.
Just keep your bootloader unlocked and keep s-off until you need to return/exchange the device.
If you haven't flashed a custom recovery yet, do:
fastboot boot customrecovery.img
And do a backup. This will backup stock ROM and recovery. There is no 3 RUU and probably never will be, I don't know what their deal is..
Then to go back to stock, restore your backup, flash your recovery.img from your backup, change your CID back to original, flash a STOCK hboot, and last use Revone to lock the bootloader and then do s-on.
EDIT : just noticed on another thread you said you were running TrickDroid - disregard my post..
Sent from my HTC One using xda premium
ok guys i think ive screwed up big time i did a full wipe in cwm (sc card too) then was going to adb sideload the rom but now my pc doesnt reconise my phone i remember having to relock my bootloader to fix this so i went back to the original file in this thread http://forum.xda-developers.com/showthread.php?t=2316726
and relocked bootloader then when i tried to unlock it i get this error
sending 'unlocktoken' (0 KB)...
OKAY [ 0.159s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.173s
any help please
brockyneo said:
ok guys i think ive screwed up big time i did a full wipe in cwm (sc card too) then was going to adb sideload the rom but now my pc doesnt reconise my phone i remember having to relock my bootloader to fix this so i went back to the original file in this thread http://forum.xda-developers.com/showthread.php?t=2316726
and relocked bootloader then when i tried to unlock it i get this error
sending 'unlocktoken' (0 KB)...
OKAY [ 0.159s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.173s
any help please
Click to expand...
Click to collapse
Can you unlock using rev one?
redbull123 said:
Can you unlock using rev one?
Click to expand...
Click to collapse
problem i have is i have no rom installed and doesnt seem to be reconzing my phone only thing that works is fastboot
brockyneo said:
problem i have is i have no rom installed and doesnt seem to be reconzing my phone only thing that works is fastboot
Click to expand...
Click to collapse
can you post a photo of your hboot?
redbull123 said:
can you post a photo of your hboot?
Click to expand...
Click to collapse
sorry i have no way of taking a pic it was 1.44.0000
brockyneo said:
sorry i have no way of taking a pic it was 1.44.0000
Click to expand...
Click to collapse
What have you been using to unlock/lock your bootloader? HTC-Dev? This is just a guess - probably wrong, but you may need to ask for a newer unlock token and try again?
You have to go back and request a new token at htcdev.
FYI -once your bootloader is unlocked and you have s-off, KEEP IT THAT WAY. There is not really a reason to keep flipping, only if you need to return/exchange the phone.
Bootloader should not have an effect on ADB sideload. I'm unlocked and I use that all the time. If you have an issue with sideloading or something else, just post about it and someone will help, but you shouldn't need to flip your bootloader.
I'm S-OFF. My device is recently unrooted, and my version is 1.28.771.10 on the THREE 3 UK network. It seems there isn't an RUU for my phone released by three. Is there any way that I can return to stock so that my phone is as new? Step by step instructions would be appreciated as i'm very new to this. My bootloader is also locked.
I am on 3 UK also.
Have done this many times .
As you have S off you can change your cid (customer or carrier id) from H3G__001 (which is 3 UK)
to so called super cid which is
11111111 (eight 1's)
When in bootloader fastboot usb mode
C:\adb> fastboot oem writecid 11111111
This will allow you to use any version RUU for your model.
Best one is WWE version which has 401 in the place where yours had 771.
I have always been unlocked when doing this. As you have got S off I will assume you can unlock bootloader.
Then download to your pc the appropriate ruu, I would suggest file (very long filename, I will just list first part of filename - will edit post to add download link)
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7
Download this to your pc
http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
It's a large file 990 MB .
The following will delete all your data, photos, video, music, txt , etc (phone number should remain in SIM ) so BE SURE TO COPY FROM PHONE TO PC ANYTHING YOU WANT TO KEEP.
Then connect your HTC One to your pc with usb cable (usb 2, preferably) and simply run the program you've just downloaded .
Your phone can be either in fastboot mode or with android running, doesn't matter which .
Follow on screen instructions, ticking boxes as appropriate.
Total process takes approximately ten minutes from starting the program to finish.
When finished you will be on stock 1.28.401.6 which is original Android 4.1.1
However if you wish you can easily update Ota (over the air) through successive versions up to 4.2 by entering settings then about then software updates then check now
Hope this helps
Sent from my HTC One using xda app-developers app
paul_59 said:
I am on 3 UK also.
Have done this many times .
As you have S off you can change your cid (customer or carrier id) from H3G__001 (which is 3 UK)
to so called super cid which is
11111111 (eight 1's)
When in bootloader fastboot usb mode
C:\adb> fastboot oem writecid 11111111
This will allow you to use any version RUU for your model.
Best one is WWE version which has 401 in the place where yours had 771.
I have always been unlocked when doing this. As you have got S off I will assume you can unlock bootloader.
Then download to your pc the appropriate ruu, I would suggest file (very long filename, I will just list first part of filename - will edit post to add download link)
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7
Download this to your pc
http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
It's a large file 990 MB .
The following will delete all your data, photos, video, music, txt , etc (phone number should remain in SIM ) so BE SURE TO COPY FROM PHONE TO PC ANYTHING YOU WANT TO KEEP.
Then connect your HTC One to your pc with usb cable (usb 2, preferably) and simply run the program you've just downloaded .
Your phone can be either in fastboot mode or with android running, doesn't matter which .
Follow on screen instructions, ticking boxes as appropriate.
Total process takes approximately ten minutes from starting the program to finish.
When finished you will be on stock 1.28.401.6 which is original Android 4.1.1
However if you wish you can easily update Ota (over the air) through successive versions up to 4.2 by entering settings then about then software updates then check now
Hope this helps
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Hey buddy, I know this is an old threat but you're on the exact same network as me and such.
I managed to get back to stock, and i'm on android version 4.1.2... but i can't seem to find any OTA android updates? Which is the main reason why I unrooted my phone. Tried the google framework fix too. Got any ideas?
tomquartey said:
Hey buddy, I know this is an old threat but you're on the exact same network as me and such.
I managed to get back to stock, and i'm on android version 4.1.2... but i can't seem to find any OTA android updates? Which is the main reason why I unrooted my phone. Tried the google framework fix too. Got any ideas?
Click to expand...
Click to collapse
If you are supercid (11111111) you will not get ota. You must change cid to one that match you OS base.
alray said:
If you are supercid (11111111) you will not get ota. You must change cid to one that match you OS base.
Click to expand...
Click to collapse
I had to SUPER CID to flash this particular RUU.
If I change my CID back now, will this mean my RUU is redundant and then brick my phone?
And the original CID was H3G_001. Do I need to go back to this one?
tomquartey said:
I had to SUPER CID to flash this particular RUU.
If I change my CID back now, will this mean my RUU is redundant and then brick my phone?
And the original CID was H3G_001. Do I need to go back to this one?
Click to expand...
Click to collapse
no its safe to change CID, you will never get OTA with supercid from this carrier
change back your cid to H3G__001 (2 lower case H3G _ _001)
Code:
fastboot oem writecid H3G__001 [COLOR="SeaGreen"]---> cid change[/COLOR]
fastboot reboot-bootloader [COLOR="SeaGreen"]--> reboot and go back to fastboot usb[/COLOR]
fastboot oem readcid [COLOR="SeaGreen"]--->confirm cid is now H3G__001[/COLOR]
fastboot reboot [COLOR="SeaGreen"]--->reboot to system[/COLOR]
then install ota
alray said:
no its safe to change CID, you will never get OTA with supercid from this carrier
change back your cid to H3G__001 (2 lower case H3G _ _001)
Code:
fastboot oem writecid H3G__001 [COLOR="SeaGreen"]---> cid change[/COLOR]
fastboot reboot-bootloader [COLOR="SeaGreen"]--> reboot and go back to fastboot usb[/COLOR]
fastboot oem readcid [COLOR="SeaGreen"]--->confirm cid is now H3G__001[/COLOR]
fastboot reboot [COLOR="SeaGreen"]--->reboot to system[/COLOR]
then install ota
Click to expand...
Click to collapse
Thank you buddy, will try this soon.
tomquartey said:
I had to SUPER CID to flash this particular RUU.
If I change my CID back now, will this mean my RUU is redundant and then brick my phone?
And the original CID was H3G_001. Do I need to go back to this one?
Click to expand...
Click to collapse
alray said:
no its safe to change CID, you will never get OTA with supercid from this carrier
change back your cid to H3G__001 (2 lower case H3G _ _001)
Code:
fastboot oem writecid H3G__001 [COLOR="SeaGreen"]---> cid change[/COLOR]
fastboot reboot-bootloader [COLOR="SeaGreen"]--> reboot and go back to fastboot usb[/COLOR]
fastboot oem readcid [COLOR="SeaGreen"]--->confirm cid is now H3G__001[/COLOR]
fastboot reboot [COLOR="SeaGreen"]--->reboot to system[/COLOR]
then install ota
Click to expand...
Click to collapse
1- easy on the double posting , then make up your mind, where you wanna post, so people can actually help
2- what ruu are you referring to?
3- no just changing CID back to original (H3G__001) does not mean you're going to get any OTA if the ^^ ruu is not H3G
nkk71 said:
1- easy on the double posting , then make up your mind, where you wanna post, so people can actually help
2- what ruu are you referring to?
3- no just changing CID back to original (H3G__001) does not mean you're going to get any OTA if the ^^ ruu is not H3G
Click to expand...
Click to collapse
I was told to change my RUU to a particular RUU from another user who is on the same network as me.
tomquartey said:
I was told to change my RUU to a particular RUU from another user who is on the same network as me.
Click to expand...
Click to collapse
well if you are on CID H3G_001 then this "change my RUU to a particular RUU" (there is no particular RUU) makes no sense at all, if you are S-Off:
1- you can change CID to unbranded and use an unbranded RUU
2- you can use one of the guides around here to go back to H3G stock
I relocked my bootloader without flashing the stock recovery. I can't seem to unlock it because the custom unlock splash screen refuses to start up... I really need to se a RUU to restore to stock. Any suggestions much appreciated as always.
Mihir1997 said:
I relocked my bootloader without flashing the stock recovery. I can't seem to unlock it because the custom unlock splash screen refuses to start up... I really need to se a RUU to restore to stock. Any suggestions much appreciated as always.
Click to expand...
Click to collapse
start by posting a "fastboot getvar all" (excluding IMEI, and s/n) , and explain how / why you ended up in this situation (a clearer description of your situation would help too)
nkk71 said:
start by posting a "fastboot getvar all" (excluding IMEI, and s/n) , and explain how / why you ended up in this situation (a clearer description of your situation would help too)
Click to expand...
Click to collapse
OK, SO I wanted to flash RUU onto my phone. I needed back to stock because I plan to sell it (the M8 is in shipment :cyclops: )
I changed cid, mid
I locked bootloader
OOOPS forgot to restore the stock recovery, stuck with CWM,
tried to re-unlock the bootloader, but nope. The command is successful on my PC / mac (tried both) but it doesn't do anything on phone screen (the accept the unlock thingy that you get)
Tried to re-do the fastboot flash unlocktoken Unlock.bin but I get an error message that says FAILED (remote: loading custom splash failed)
No idea what to do, I think i perma bricked the hBoot/bootloader. I can boot into my CWM and custom rom fine, but IDK how to flash the RUU now since I have no stock recovery. On top of that, I don't know whether i can even flash any other (stock) rom on here because I have s-off but relocked bootloader...
Still need a fastboot getvar all, excluding imei
Sent from my HTC One using Tapatalk
nkk71 said:
Still need a fastboot getvar all, excluding imei
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Oh totally forgot that Here:
Code:
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.23.3263.28
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.401.8
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 4169mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Hope that clarifies whatever I was too stupid to omit from my accounts of events...
Ah, s-off ... Easy to fix, just a bit later... Not on my pc at the moment...
Will post back...
Sent from my HTC One using Tapatalk
nkk71 said:
Ah, s-off ... Easy to fix, just a bit later... Not on my pc at the moment...
Will post back...
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Pm'ed
Thanks,
Mihir1997 said:
Pm'ed
Thanks,
Click to expand...
Click to collapse
I think to be in the same situation, I flashed a firmware stock without before go to firmware rom and now I stuck on bootloader and flashboot refuse to remote
I really need help, please pm me
Mihir1997 said:
Pm'ed
Thanks,
Click to expand...
Click to collapse
okay, back.. you online?
and just to confirm... do you have stock recovery or custom... if custom which one and version number please
let's start by unlocking bootloader
nkk71 said:
okay, back.. you online?
and just to confirm... do you have stock recovery or custom... if custom which one and version number please
let's start by unlocking bootloader
Click to expand...
Click to collapse
Hey, yeah its custom. CWM touch 6.0.4.8
Mihir1997 said:
Hey, yeah its custom. CWM touch 6.0.4.8
Click to expand...
Click to collapse
well, the time difference isn't helping, since i'm almost off for tonight, but with S-OFF, use:
http://forum.xda-developers.com/showthread.php?t=2475914
are you sure 6.0.4.8 (thought .6 was the last one).
to unlock.... basically reboot to CWM then type:
adb shell echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
adb reboot bootloader
and you should be unlocked.
the rest can wait till someone else picks it up, or till tomorrow
nkk71 said:
well, the time difference isn't helping, since i'm almost off for tonight, but with S-OFF, use:
http://forum.xda-developers.com/showthread.php?t=2475914
are you sure 6.0.4.8 (thought .6 was the last one).
to unlock.... basically reboot to CWM then type:
adb shell echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
adb reboot bootloader
and you should be unlocked.
the rest can wait till someone else picks it up, or till tomorrow
Click to expand...
Click to collapse
Nope. didn't work.
I got this :
Code:
dd: /dev/block/mmcblk0p3: No such file or directory
Thanks though
EDIT: It worked now. Yay. Now I just need help with this RUU....
It is the zip-file type of RUU not the executable PC program. In either case, when I try to fastboot flash in the RUU mode (after oem rebootruu) I get this output
Code:
./fastboot flash zip /Users/chucklesthedragon/Downloads/PN07IMG_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.zip
sending 'zip' (1133421 KB)... OKAY
writing 'zip'... INFOrom parsing start ...
INFOrom parsing finish ...
INFOzip header checking...
INFOzip info parsing...
INFORead zipped android_info fail
ERROR: usb_read failed with status e00002e8
FAILED (status read failed (No such file or directory))
Mihir1997 said:
Nope. didn't work.
I got this :
Code:
dd: /dev/block/mmcblk0p3: No such file or directory
Thanks though
Click to expand...
Click to collapse
try following scotty's commands, open the adb shell etc...
where did you get that recovery from? are you sure it's m7_u/ul version?
sorry got to go, we can pick this up tomorrow if you don't mind.... and yes it will work! (I can even give you a [several] recovery that you can flash with a locked bootloader, but not just tonight, sorry mate)
nkk71 said:
try following scotty's commands, open the adb shell etc...
where did you get that recovery from? are you sure it's m7_u/ul version?
sorry got to go, we can pick this up tomorrow if you don't mind.... and yes it will work! (I can even give you a [several] recovery that you can flash with a locked bootloader, but not just tonight, sorry mate)
Click to expand...
Click to collapse
Nkk, thanks a ton. I got it working after followin the instruction in the link you reffered to. Now I just need to flash this RUU. I included the details in my previous post^^^
Don't worry, tomorrow is fine. As long as I get this working...
EDIT
I downloaded of the ClockwordMod/romanager website. I'm sure I gave you the right details unless they are wrong on the site...
Mihir1997 said:
OK, SO I wanted to flash RUU onto my phone. I needed back to stock because I plan to sell it (the M8 is in shipment :cyclops: )
I changed cid, mid
I locked bootloader
OOOPS forgot to restore the stock recovery, stuck with CWM,
Click to expand...
Click to collapse
Okay, so now that the phone is unlocked again, a few questions:
1- Do you need to set it back to S-On, or can you leave it S-Off
2- what were you're original MID and CID
3- do you need to just set it back to "any" kind of stock, or do you want to do the whole thing, and set it back to "out-of-the" box
4- what OS are you running
nkk71 said:
Okay, so now that the phone is unlocked again, a few questions:
1- Do you need to set it back to S-On, or can you leave it S-Off
2- what were you're original MID and CID
3- do you need to just set it back to "any" kind of stock, or do you want to do the whole thing, and set it back to "out-of-the" box
4- what OS are you running
Click to expand...
Click to collapse
I would like s on if possible since I'm selling or giving to my dad
Cid was bm___001 I don't remember the mid, but it is the bell Canada variant.
I'd like either bell Canada stock out of the box or developer edition. Basically any stock that can be used on bell Canada, or can be easily SIM unlocked.
Currently running maximushd 33.0 latest release.
Did you see the error that I get when I try to ./fastboot flash zip ruu.zip
Its in the post before the previous post.
Mihir1997 said:
I would like s on if possible since I'm selling or giving to my dad
Cid was bm___001 I don't remember the mid, but it is the bell Canada variant.
I'd like either bell Canada stock out of the box or developer edition. Basically any stock that can be used on bell Canada, or can be easily SIM unlocked.
Currently running maximushd 33.0 latest release.
Did you see the error that I get when I try to ./fastboot flash zip ruu.zip
Its in the post before the previous post.
Click to expand...
Click to collapse
Are you SIM-locked to Bell?
nkk71 said:
Are you SIM-locked to Bell?
Click to expand...
Click to collapse
Yes sir. That is fine since I only use the device on bell anyway.
Mihir1997 said:
Yes sir. That is fine since I only use the device on bell anyway.
Click to expand...
Click to collapse
Well if you're sim-locked, then (although a longer process), I would recommend you go back to 100% Bell, otherwise there's a high chance the unlock code will not work.
Take a look at my guide: http://forum.xda-developers.com/showthread.php?t=2541082
Post your "fastboot getvar all" (excluding IMEI and s/n), and mention you're on Bell, in my thread, and I'll post the links to which files you need.
Also post any questions you may have... you'll be using the CWM restore method (so post #1, #2, and #5)
Hi, all. I get a very wired cid in my HTC one t528w(retails for China, I think.).
C:\Users\Andes\Downloads\adb-fastboot>fastboot getvar cid
cid: %? ?
finished. total time: 0.003s
as you can see I use 'cmd' to get my cid, I get a garbled cid. but mid is alright: mid: PM6012000. Right now the phone is unable to boot normally to the home screen, but only the fastboot. So I am trying to use RUU to flash the phone, but as the cid is wired, every time I flash the phone using RUU, it shows 'cid error'(132). I don't know what I can do now. I even can't flash a supercid to the phone, because, when I connect the phone to my pc, and try 'adb shell', it just shows 'device not found'. That's very strange.
hey dude try this . my cid was weird too. now im htc_001 on pn07100
may T 4d be w U =)
http://forum.xda-developers.com/showthread.php?t=2596527
wiwengweng said:
Hi, all. I get a very wired cid in my HTC one t528w(retails for China, I think.).
C:\Users\Andes\Downloads\adb-fastboot>fastboot getvar cid
cid: %? ?
finished. total time: 0.003s
as you can see I use 'cmd' to get my cid, I get a garbled cid. but mid is alright: mid: PM6012000. Right now the phone is unable to boot normally to the home screen, but only the fastboot. So I am trying to use RUU to flash the phone, but as the cid is wired, every time I flash the phone using RUU, it shows 'cid error'(132). I don't know what I can do now. I even can't flash a supercid to the phone, because, when I connect the phone to my pc, and try 'adb shell', it just shows 'device not found'. That's very strange.
Click to expand...
Click to collapse
Wrong forum, This is the HTC One M7 (MIDN07XXXXX) forum
PM6012000 is HTC One S released in 2012. Your forum is there: http://forum.xda-developers.com/htc-one-s
ivangs2 said:
hey dude try this . my cid was weird too. now im htc_001 on pn07100
may T 4d be w U =)
http://forum.xda-developers.com/showthread.php?t=2596527
Click to expand...
Click to collapse
thanks for your response. But I cannot unlock my phone now, because the token is generated with the cid, I think. I cannot get a correct cid, so that I cannot get a rooted device. what do you think?