Related
This rom need some help from dev. YOU can use my work with permissions for enchancements​
This rom is based from the Droid X Nightly build 33. This is VERY VERY VERY PRE MEGA ALPHA so dont be surprised if you're stock on Cyanogen logo. Some works is needed for this rom so PM me if you want to contribute to this build.
LINK:
http://www.multiupload.com/IH0PDILYK7
WOW! Sounds promising! Can't wait
This build is pre-alpha. There's so many problems as it is on the Droid X, I highly doubt anything would come from porting this.
I would wait until its gone final to start a port. As everyone does.
Sent from my MB860 using XDA App
please comunicate with @ibproud on twitter, and join us on the teamj, so far we have a custom cm kernel. once some panics are figure out a full build will be made. join us on the effort
Finally, im ready to test
Are u from the official CM team, that is appointed to work on the Atrix?
SS2006 said:
Finally, im ready to test
Are u from the official CM team, that is appointed to work on the Atrix?
Click to expand...
Click to collapse
Probably not. It seems that he's doing this solo.
Oh all the best, same thing either way if it works.
I see the DRoid X has a RC version, yet there is sitll nightlies as of yesterday, hows that work
Yungboss, will this include a kernel? Or just the ROM?
it will include the Faux's att kernel but im not sure if this kernel is compatible with cm 7
Sinful Animosity said:
Yungboss, will this include a kernel? Or just the ROM?
Click to expand...
Click to collapse
Pm me asap :d
samcripp said:
please comunicate with @ibproud on twitter, and join us on the teamj, so far we have a custom cm kernel. Once some panics are figure out a full build will be made. Join us on the effort
Click to expand...
Click to collapse
yungboss22 said:
it will include the Faux's att kernel but im not sure if this kernel is compatible with cm 7
Click to expand...
Click to collapse
i already gave you the invite to official, team remember @ibuproud
not easier porting cm7 for the gx2? or o2x? as these are tegra devices?
Link available
LINK AVAILABLE :
http://www.multiupload.com/IH0PDILYK7
yungboss22 said:
This rom need some help from dev. YOU can use my work with permissions for enchancements​
This rom is based from the Droid X Nightly build 33. This is VERY VERY VERY PRE MEGA ALPHA so dont be surprised if you're stock on Cyanogen logo. Some works is needed for this rom so PM me if you want to contribute to this build.
LINK:
http://www.multiupload.com/IH0PDILYK7
Click to expand...
Click to collapse
i think i just went into convulsions from the excitement!
So does it boot or does it not boot at all?
github......?
BravoMotorola said:
So does it boot or does it not boot at all?
Click to expand...
Click to collapse
No boot here.
kennethpenn said:
No boot here.
Click to expand...
Click to collapse
Didn't think so. Yungboss, did you test this on your device by any chance?
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
Didn't think so. Yungboss, did you test this on your device by any chance?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Lol that's what I was about to ask. Also What modifications exactly did you make to the DX nightly rom to turn in into this "pre alpha" build?
Im stock in motorola unlocked image
Edit: maybe a kernel incompatibility
Sent from my MB860 using XDA App
Hi, guys.
I'm trying to figure out how I can integrate it, basically, for stock safe-system at least.
I downloaded some ready-to-go droid bionic cm9 with kexec integrated, didn't understand the idea of devtree(probably it's patched). Should we compile kexec for ourself with modules? where can I read about it?
Thanks,
Oleg
Might want to check out the Eternity Project website. Kholk seems to be based there and I know he did a lot of the early work on this exploit.
Droid 4 - AOKP K1L0
I read there a little, but if hashcode can comment kexec thing, would be nice.
I saw that it tries to boot kernel when you start safe system, but still need some examples.
http://files.rombot.org/ROMs/maserati/kexec/ try this
tobby88 said:
http://files.rombot.org/ROMs/maserati/kexec/ try this
Click to expand...
Click to collapse
you're quick, downloaded already
So anyone flashed the kexec CM9 build yet? I probably won't get a chance to until this evening.
Droid 4 - AOKP K1L0
kwyrt said:
So anyone flashed the kexec CM9 build yet? I probably won't get a chance to until this evening.
Droid 4 - AOKP K1L0
Click to expand...
Click to collapse
flashed, works fine. But I can't figure out why kexec doesn't boot in my motorola ics based rom
the one good thing I want to say for now - both CPU cores are working fine.
olegfusion said:
flashed, works fine. But I can't figure out why kexec doesn't boot in my motorola ics based rom
the one good thing I want to say for now - both CPU cores are working fine.
Click to expand...
Click to collapse
Sorry for my noobish question, but I have no idea what Kexec is or what it can do.
Would someone mind giving a quick summary?
Thanks!
-Nolam
Nolam20 said:
Sorry for my noobish question, but I have no idea what Kexec is or what it can do.
Would someone mind giving a quick summary?
Thanks!
-Nolam
Click to expand...
Click to collapse
Kexec is the future for D4 ROMs. It is an exploit that allows the flashing of custom built kernels. No more trying to build ROMs around Moto's stock kernel.
Droid 4 - AOKP K1L0
tobby88 said:
http://files.rombot.org/ROMs/maserati/kexec/ try this
Click to expand...
Click to collapse
flashed and working well
edit -- ut oh, spoke too soon. "Can't connect to camera"
hmmm.
mattvirus said:
flashed and working well
edit -- ut oh, spoke too soon. "Can't connect to camera"
hmmm.
Click to expand...
Click to collapse
I think I saw via hashcode's twitter that the camera is the main problem area on the kexec builds.
Droid 4 - AOKP K1L0
Also having quite a difficult time getting gapps to flash. Pulled the 0429 build from goo-im and flashed multiple times but it's never present in the apps list. never seen this before hmmmmm
edit -- got it this (3rd) time, very strange but oh well.
Can anybody try to boot kexec kernel in the eclipse or my rom?
Tried to replace kernel modules, added kexec folder, no luck with booting.
Need to do something with ramdisk, I tried some changes, got cycle reboot after kexec load. Will continue
Continue the thread here:
http://rombot.org/forums/index.php?/topic/1851-rom-nightlies-cm9ics-unofficial-kexec-builds/
I have searched high and low but cannot seem to find out if there's any ability to OC JB builds. I was running Eclipse and OC'ing with speedscript. Can you run speedscript with JB? If not, is there a way to OC on JB? Any help would be appreciated. I have definitely spent time looking or I'd not have asked... I hate jackasses like me, ha.
strakajagr said:
I have searched high and low but cannot seem to find out if there's any ability to OC JB builds. I was running Eclipse and OC'ing with speedscript. Can you run speedscript with JB? If not, is there a way to OC on JB? Any help would be appreciated. I have definitely spent time looking or I'd not have asked... I hate jackasses like me, ha.
Click to expand...
Click to collapse
I know JB can be OCd. I'm using zach's speedscript posted over on DroidForums that includes a slight OC to 1260. Not sure if the speedscripts posted in the Eclipse ICS thread will work on JB but I don't see why they wouldn't.
Droid 4 - AOKP JB
kwyrt said:
I know JB can be OCd. I'm using zach's speedscript posted over on DroidForums that includes a slight OC to 1260. Not sure if the speedscripts posted in the Eclipse ICS thread will work on JB but I don't see why they wouldn't.
Droid 4 - AOKP JB
Click to expand...
Click to collapse
can you post a link to the speedscript? I can't find it. I don't think the eclipse overclocks will work: aokp 10/22 doesn't have /proc/cpu_control, so you can't write to 'tweak_cpu'.
Should be the first post on page 28 by Z4CK_SkyL1n3
http://www.droidforums.net/forum/droid-4-roms/222043-aokp-skyl1n3-status-online-links-online-28.html
I've successfully flashed this on multiple JB ROMs.
kwyrt said:
Should be the first post on page 28 by Z4CK_SkyL1n3
http://www.droidforums.net/forum/droid-4-roms/222043-aokp-skyl1n3-status-online-links-online-28.html
I've successfully flashed this on multiple JB ROMs.
Click to expand...
Click to collapse
got it; thanks! so those extra modules work, too?
(edit) yep, they work. turns out that they are the same modules that myfishbear provides with his eclipse rom, so I'm using a modification of one of his overclock scripts; seems to work just fine. I bet his speedscript would work, too, but I haven't tried it yet.
http://forum.xda-developers.com/showthread.php?t=1754888
I tried this one and it works perfectly on my Droid 4 (AOKP 22-Oct Build)
I've been using Codename ever since it came out but I got tired of the problems related to the Kernel and switched to ProjectX. I and I'm sure others really want to use a smooth and working JB ROM.
Is there anyone working on the 3.0 Kernel for our device? I know Nik said he contacted someone to help us out but there's been no news on that front yet.
If anyone knows how to modify Kernels, Adi_pat gave some tips here -
http://forum.xda-developers.com/showthread.php?p=33291894
He'll probably help us out if we make some progress in booting up Codename with it at least
TheDareDevil said:
I've been using Codename ever since it came out but I got tired of the problems related to the Kernel and switched to ProjectX. I and I'm sure others really want to use a smooth and working JB ROM.
Is there anyone working on the 3.0 Kernel for our device? I know Nik said he contacted someone to help us out but there's been no news on that front yet.
If anyone knows how to modify Kernels, Adi_pat gave some tips here - http://forum.xda-developers.com/showthread.php?t=1899335&page=38
He'll probably help us out if we make some progress in booting up Codename with it at least
Click to expand...
Click to collapse
Upon the exit of JB roms ago, were used GB modified kernel, now with source code maybe will be possible to compile a fully working kernel, but afaik there are no 3.x kernel for JB, maybe someone is working out of xda on irc channel but don't known..
Sadly I do not have much competence, plus I don't have the phone it's to repair....
There is kernel 3 for incredible 2 and desire s..may be someone can port it..
Sent from my HTC Incredible S using xda app-developers app
I might be crazy, but I remember reading a post not too long ago about a dev that was writing the 3.0 kernel from source for our phones. I haven't heard an update since then, but I remember hearing it was someone with relation to the cm9 team. It sounded promising, but that development was very slow.
Sent from my HTC Incredible S using xda app-developers app
TheMegosh said:
I might be crazy, but I remember reading a post not too long ago about a dev that was writing the 3.0 kernel from source for our phones. I haven't heard an update since then, but I remember hearing it was someone with relation to the cm9 team. It sounded promising, but that development was very slow.
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
Off the top of my head I seem to recall Noverbose saying he was trying to write a 3.0 Kernel. I also remember at least one other person mentioning something similar to, so there are people working on this. From what I understand it's not easy - I doubt we'll see anything this side of Christmas tbh. I hadn't realised that the Inc 2 and DS had a 3.0 Kernel though. Anyone know if they are actually a made from source version, rather than the same hacked version that we have in Codename, for example?
Well tbh honest a working GB kernel would do too.
Like the front camera and chrome and screen flickering etc.
Damn I wish kaijura was here
Sent from my HTC Incredible S using xda app-developers app
CyanideJack said:
Off the top of my head I seem to recall Noverbose saying he was trying to write a 3.0 Kernel. I also remember at least one other person mentioning something similar to, so there are people working on this. From what I understand it's not easy - I doubt we'll see anything this side of Christmas tbh. I hadn't realised that the Inc 2 and DS had a 3.0 Kernel though. Anyone know if they are actually a made from source version, rather than the same hacked version that we have in Codename, for example?
Click to expand...
Click to collapse
Yes those 3.0 kernels are compiled from source. I checked out AOSP ROM threads in the Desire S and Inc 2 section that had 3.0 kernel, then looked up the creator of the ROM on github and found the sources. I was going to try tackle the 3.0 kernel to get a hang of the make system before building CM9, but I don't have enough monthly data left to download the kernel toolchain! Nov 1st is close, so I can get to work soon! :highfive:
The best way to build an AOSP 3.0 kernel for our device would probably be to look at the source code for 3.0 kernels on our sister devices, and figure it out from there.
ZaySk said:
Yes those 3.0 kernels are compiled from source. I checked out AOSP ROM threads in the Desire S and Inc 2 section that had 3.0 kernel, then looked up the creator of the ROM on github and found the sources. I was going to try tackle the 3.0 kernel to get a hang of the make system before building CM9, but I don't have enough monthly data left to download the kernel toolchain! Nov 1st is close, so I can get to work soon! :highfive:
The best way to build an AOSP 3.0 kernel for our device would probably be to look at the source code for 3.0 kernels on our sister devices, and figure it out from there.
Click to expand...
Click to collapse
Well holy crap, dude, get on that! Seriously though, getting a working 3.0 kernel for our device would go a long way to making JB a usable ROM for our device. Would it be possible to port JellyTime or a similar JB ROM to our device as well?
The source doesn't need changing, it is the ramdisk that is the problem. I have been trying to get help, but so far no luck, adi_pat said he would take a look, but it is hard for me to test as I no longer have an inc s
CyanideJack said:
Well holy crap, dude, get on that! Seriously though, getting a working 3.0 kernel for our device would go a long way to making JB a usable ROM for our device. Would it be possible to port JellyTime or a similar JB ROM to our device as well?
Click to expand...
Click to collapse
I'm gonna worry mainly about compiling CM9 from source once November hits, that's gonna take up the majority of my time. After I get the first release of CM9 out, I'll start work on a 3.0 kernel if it hasn't been done yet. I have no experience whatsoever dealing with kernels though, except for small ramdisk edits, so don't expect any miracles.
It should be possible to port other JB ROM's over using one of nik's ported JB ROM's as a base and reference point, the only problem is I don't know exactly what files I have to substitute to port a ROM. I've PM'd nik about that a few hours ago, so hopefully I'll get some more information on the subject. Nik has been a big help to my dev efforts as a whole.
l0st.prophet said:
The source doesn't need changing, it is the ramdisk that is the problem. I have been trying to get help, but so far no luck, adi_pat said he would take a look, but it is hard for me to test as I no longer have an inc s
Click to expand...
Click to collapse
Interesting, if it's only the ramdisk that needs changing, couldn't you look at the ramdisk from one of niks JB ROM's? Or is it not as simple as that? I'm assuming the latter, seeing as if it were that obvious I'm sure someone would've done it by now. If you ever need help testing, send me a PM I'd be more than willing to test for you.
ZaySk said:
I'm gonna worry mainly about compiling CM9 from source once November hits, that's gonna take up the majority of my time. After I get the first release of CM9 out, I'll start work on a 3.0 kernel if it hasn't been done yet. I have no experience whatsoever dealing with kernels though, except for small ramdisk edits, so don't expect any miracles.
It should be possible to port other JB ROM's over using one of nik's ported JB ROM's as a base and reference point, the only problem is I don't know exactly what files I have to substitute to port a ROM. I've PM'd nik about that a few hours ago, so hopefully I'll get some more information on the subject. Nik has been a big help to my dev efforts as a whole.
Interesting, if it's only the ramdisk that needs changing, couldn't you look at the ramdisk from one of niks JB ROM's? Or is it not as simple as that? I'm assuming the latter, seeing as if it were that obvious I'm sure someone would've done it by now. If you ever need help testing, send me a PM I'd be more than willing to test for you.
Click to expand...
Click to collapse
About using one of Nik's JB roms as a reference
What I understood was that the rom has been built around the old 2.6.x kernel and has to be modified again to work with the 3.0.x kernel, if you guys get one up and running. If that is the case, wouldn't you be going down the wrong path if you model it around nik's existing 2.6.x roms?
We need kaijura here, he was our AOSP kernel master. Hopefully he is doing ok, and has found something else other than xda because he hasn't been online for months. At least other devs, like lordclokan and kali- have moved on and are active with other devices... kaijura hasn't been on at all. Anyone been in contact with him/her?
markj338 said:
About using one of Nik's JB roms as a reference
What I understood was that the rom has been built around the old 2.6.x kernel and has to be modified again to work with the 3.0.x kernel, if you guys get one up and running. If that is the case, wouldn't you be going down the wrong path if you model it around nik's existing 2.6.x roms?
We need kaijura here, he was our AOSP kernel master. Hopefully he is doing ok, and has found something else other than xda because he hasn't been online for months. At least other devs, like lordclokan and kali- have moved on and are active with other devices... kaijura hasn't been on at all. Anyone been in contact with him/her?
Click to expand...
Click to collapse
I know, it would be going down a pretty redundant path. If I was able to port over a JB ROM using nik's ROM's as a base, then my ported ROM would inherit all the same bugs nik's ROM's already have.
I wish kaijura was still around, I have so many questions I want to ask about compiling from source! Luckily lordclokan was a massive help to me in that regard. Kaijura's github hasn't seen action in months either, sadly.
Forgive my ignorance, but isn't the Desire HD essentially our device with a bigger screen and less memory? That being the case, could we not just port across one of the 3.0 Kernels from that?
The problem with the ramdisk that come with the official ROM's that have 3.0 kernels, is that they are built for the sense framework and don't work on AOSP ROM's. The ram disk that is included with Nik's JB ROM's is heavily modified to run a GB kernel with ICS / JB sources, so the problem is I don't have a base to work from, I am basically trying to merge the two init's to make the 3.0 kernel boot.
Saying that we need to port 3.0 kernel is probably a bit misleading, and for that I apologise, the kernel itself has very little Sense specific stuff, it's the ramdisk that is responsible for launching the kernel that is the issue here at the moment.
The only problem with the desire HD kernel would be that our front camera would not work
+ I forgot to link to adi_pat's post - http://forum.xda-developers.com/showthread.php?p=33291894
Sent from my HTC Incredible S using xda app-developers app
l0st.prophet said:
The problem with the ramdisk that come with the official ROM's that have 3.0 kernels, is that they are built for the sense framework and don't work on AOSP ROM's. The ram disk that is included with Nik's JB ROM's is heavily modified to run a GB kernel with ICS / JB sources, so the problem is I don't have a base to work from, I am basically trying to merge the two init's to make the 3.0 kernel boot.
Saying that we need to port 3.0 kernel is probably a bit misleading, and for that I apologise, the kernel itself has very little Sense specific stuff, it's the ramdisk that is responsible for launching the kernel that is the issue here at the moment.
Click to expand...
Click to collapse
Well you can prolly get ideas from adi ( he posted http://forum.xda-developers.com/showpost.php?p=33302707&postcount=387 not sure if you saw it) he seems to know what's up.
TheDareDevil said:
The only problem with the desire HD kernel would be that our front camera would not work
+ I forgot to link to adi_pat's post - http://forum.xda-developers.com/showthread.php?p=33291894
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
So it looks like the furthest things got regarding a 3.0 Kernel was;
Adi_Pat said:
chan
Ok so 2.6.35 works with Jellybean. Why not pack the ramdisk with zImage compiled from 3.0.y sources(Considering you are using standard boot.img format[?]) Because to get it to boot, you would not require any hacks/changes to source, editing ramdisk(init.rc) is enough to make it boot initally.
EDIT: You may also need to change init binary.
Click to expand...
Click to collapse
l0st.prophet said:
The problem with the ramdisk that come with the official ROM's that have 3.0 kernels, is that they are built for the sense framework and don't work on AOSP ROM's. The ram disk that is included with Nik's JB ROM's is heavily modified to run a GB kernel with ICS / JB sources, so the problem is I don't have a base to work from, I am basically trying to merge the two init's to make the 3.0 kernel boot.
Saying that we need to port 3.0 kernel is probably a bit misleading, and for that I apologise, the kernel itself has very little Sense specific stuff, it's the ramdisk that is responsible for launching the kernel that is the issue here at the moment.
Click to expand...
Click to collapse
Very interesting, thanks for the informative post. :good:
zaysk said:
very interesting, thanks for the informative post. :good:
Click to expand...
Click to collapse
happy november!!!
markj338 said:
happy november!!!
Click to expand...
Click to collapse
A very happy November indeed
Is there a Cyanogenmod 7 (Gingerbread 2.3.7) for N7000?
Nope, there are ROMs based on TW gingerbread though,I personally have never used them though.
XxPixX said:
Nope, there are ROMs based on TW gingerbread though,I personally have never used them though.
Click to expand...
Click to collapse
Thanks. I'll build one then. Almost done with gb device tree.
victorator said:
Thanks. I'll build one then. Almost done with gb device tree.
Click to expand...
Click to collapse
If you get the kernel working, and a successful build, that would be quite interesting. Good luck.
AndroidSlave said:
You won't get the kernel working
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Ah.. Haven't looked at the kernel sources yet. There are no gb sources only ics and up am I right?
victorator said:
Ah.. Haven't looked at the kernel sources yet. There are no gb sources only ics and up am I right?
Click to expand...
Click to collapse
I modified my post to be less offensive but you beat me to it lol =)
Sent from my GT-N7000 using Tapatalk 2
AndroidSlave said:
I modified my post to be less offensive but you beat me to it lol =)
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
No worries :]
Have you tried GT-N7000_GB_Opensource_Update2.zip ?
Looks good enough to build. What toolchain did you use?
Hi victorator,
If you can pull this off mate, you will be a LEGEND!!!!
I too am after summit like this, and I have trailled all over the forums trying to find ANY kind of GB rom that I can flash/install via CWM.
But so far all the links are either dead, or point towards viruses now!!!
If you can make a clean CM7, or know any decent GB roms that I can look into and rip parts of the TW out... that would be AMAZING!!!!
Good luck, really hoping you can do this!!!
Cheers, Lister
Good luck mate !
I'd love to see CM7 on Note and remind old gingerbread times
Good luck! Hope you'll make it!
I don't have the N7000 but I will get it next week.
In the mean time can someone test my AOKP jb-mr2 build?
http://goo.im/devs/victorator/AOKP_N7000
It's android 4.3.1
Please report if it works
Hi @victorator,
Is there any development, news on this pure CM7 rom for our Note's???
I know your working hard on newer roms, but would be cool to have a retro rom too.. Especially as I gained my Note later on, so missed out on all the Gingerbread roms... and having loved CM7 on my ZTE Blade. Would be cool to see what its like on N7000 too...
Good luck, hope all is well...
Lister
Hey man,
I'm sorry but I don't think I will be able to get CM7 running. Back in the day CM used a prebuilt kernel file. That's why I won't be able to compile it myself as they haven't put out the kernel for it.
I would love to give CM7 a go on the note as well but I don't have enough knowledge on the subject to get it to work.
Hi All,
Still think this would be an awesome feat, if ever it did come to our Notes. Sure it's old, sure... No one will prolly use it much afterwards anyway...
But heck, a lot of us grew up on what was the first main CM build (excluding CM6?? lol) aka, CM7 (Gingerbread).
Does anyone have the skills to help @victorator or others, get past the kernel issue and help build a CM7 rom. Apparently (although cannot confirm myself) that the S2 phone had a CM7, and "apparently" similar hardware...
Anyone got the know-how, to make this happen....??
Thanks, Lister
Main thing would be the kernel
Sent from my Nexus 5 using Tapatalk
Hi All,
It would appear CM7 for the N7000 already exists.... and it was developed here, by someone on this very forum... But I have been searching high and low for it, and I canny find it....
http://forum.xda-developers.com/galaxy-note/help/cm7-android-2-3-7-n7000-existed-one-t2902446
Does anyone know who did it, or it's where abouts... Or those, who had this device in the early days still have a copy of it floating around on their HDD that they could re-upload?? As it seems the link in the source site, is now dead...
Cheers, Lister