Database Develop

[MOD] v0.3.1 Working Full Ubuntu for 1.5.7 and 1.8.3 based on Sogarth's script

Sogarth's webtop2sd will be released soon, you really should wait and install that instead of this! Thanks -The Management
No longer breaks on 1.83, thanks to Romracer
Update: This script worked on my phone. Mind you I was installing it from a fresh SBF flash, but it should work on your phone too. Absolutely no guarantees as usual.
Update 11th April 2011, 06:59 PM: Won't be getting CWM package because it'd be huuuuuuuuuge.
Update 28th April 2011. 16:38 PM: Removing BETA tag since there have been no issues with the script for quite some time.
First off I would like to thank Sogarth for making this script in the first place as well as Romracer for fixing it for 1.83. Since he is busy doing more important work I decided to do this little hack for those of us that updated to 1.5.7 and dont feel like flashing back to earlier versions to get full Ubuntu working.
Again, this is only necessary if you're already running 1.5.7 or 1.8.3.
Secondly, I am still working on this script so it may not work for you. If you have a problem you may post in the thread or PM me showing exactly the error message, word for word, that you receive.
Updates will be included in the OP from time to time as I fix errors.
Instructions:
1) install.bat (from your computer)
2) adb shell (get a shell on your phone)
3) su (get root on your phone in that shell)
4) . /data/local/tmp/install.sh (run the install script *on your phone* don't forget the "." and the space after the dot, or you will have to chmod 755 the shell script manually)
5) ?????
6) profit\
Noob instructions, written by Viamonte (I take no credit or responsibility):
Thanks again for all your help. Now the noob instructions:
"1-Download "Terminal Emulator" from the market, on your phone (or any other terminal), and the file anexed in this thread to your computer.
2-Connect the Atrix to the computer via USB, configuring the connection mode to "None" and enabling USB Debugging mode (Settings>Applications>Development>USB debugging)
3-Unzip the file you downloaded on your pc, and run Install.bat. This will push the script to your phone.
4-Go back to your phone and open the emulator you downloaded. Then type "su" (without quotes) and press enter. Then type ". /data/local/tmp/install.sh" (without quotes) and press enter again.
The script should begin running now. It will stop in two moments where you'll be instructed to get a cup of coffee, and may take several minutes to continue form this point. When finished, the Atrix will reboot.
To check if this worked, use the Webtop either on your multimidia dock or your lapdock and verify if new itens appeared on your task bar and on the right upper side of the screen"
0.3.1 release
0.2 release
0.1 first release
Changelog
0.3.1 fix to gconf file's mdate so it does what its supposed to do =)
0.3 Small typo fixes and cpp package install fix by romracer, now works on 1.83 =)
0.2 Fixed some typos in uninstall.sh and make sure the %gconf file wound up in the right spot.
0.1 - first version. NOT CWM install but ready to be packaged for that more or less

Nice, I'll give this a shot later.

Ill give it a shot when I get home!
Sent from Motorola Atrix on TELUS.

My phone is working perfectly, so why not ruin it?
I'm giving this a try right now!
1.4.57 - Rooted and gingerblurred with HDMI Mirroring and Webtop hack.
I'll update as progress goes along:
Edit 1:
Initial try gave me this
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] y
Mounting the filesystem...
07.sh
--------------------------------------------
EXECUTION FAILED
Unable to mount the filesystem file. ERR 07
--------------------------------------------
Press any key to continue . . .
Edit 2:
Ok, it doesnt work with resetting it. How about removing?
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] n
A filesystem file already exists. Delete it? [n] y
Deleting the filesystem file...
--------------------------------------
EXECUTION FAILED
Unable to delete the filesystem file.
--------------------------------------
Press any key to continue . . .
Edit 3:
Ok, only one option left then.
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] n
A filesystem file already exists. Delete it? [n] n
--------------------------------------------------------------------------
EXECUTION FAILED
The filesystem file already exists, but no operations have been selected.
--------------------------------------------------------------------------
Press any key to continue . . .
=====================================================================
Edit 4:
Since execution is failing I'm trying to find the problem. Using ADB Shell i tried to manually run the shell scripts and stumbled here:
(I tried chmod 777 @ 02.sh to see if that was the problem, no change is results)
# ls -l
...
...
-rwsr-sr-x shell shell 87 2011-04-06 12:13 03.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
-rwsr-sr-x shell shell 251 2011-04-06 12:04 01.sh
# pwd
pwd
/data/tmp/shell
# /data/tmp/shell/02.sh
/data/tmp/shell/02.sh
/data/tmp/shell/02.sh: not found

I had the same issue as flybob when I tried to run the script.
Sent from my MB860 using XDA Premium App

Good effort, but 1.57 changes how we have to run commands as root. On a normal linux box, I'm sure your methods would work fine, but we're not dealing with a normal su binary. You should look into doing this as CWM as opposed to .bat files. I had a hell of a time getting around the restrictions since the psneuter exploit was closed.

Ah, I did not think about that Ririal, thanks for the info. I am not familiar with CWM though.
Why is the /tmp directory in /data ? That would certainly cause every script to fail.
I'll look at this some more tonight.

Ririal said:
Good effort, but 1.57 changes how we have to run commands as root. On a normal linux box, I'm sure your methods would work fine, but we're not dealing with a normal su binary. You should look into doing this as CWM as opposed to .bat files. I had a hell of a time getting around the restrictions since the psneuter exploit was closed.
Click to expand...
Click to collapse
How about a shell script that we can run in terminal emulator ? and the output goes to screen and a log file for debug !

molotof said:
How about a shell script that we can run in terminal emulator ? and the output goes to screen and a log file for debug !
Click to expand...
Click to collapse
most of the script is now run by shell scripts, no reason you couldn't run them in the terminal emulator, just get the order right. There are also a few lines I didn't translate to shell so you'd have to enter them by hand.
In any case I'll keep working on this until Sogarth releases his version with union mounts =D

You might be interested to know this;
# cd /tmp
cd /tmp
# pwd
pwd
/data/tmp
# ls -l /tmp
lrwxrwxrwx root root 2011-04-09 14:47 tmp -> /data/tmp
I'll happily help with the script, i know tons of linux and got my Atrix ready to be bricked

flybob said:
You might be interested to know this;
# cd /tmp
cd /tmp
# pwd
pwd
/data/tmp
# ls -l /tmp
lrwxrwxrwx root root 2011-04-09 14:47 tmp -> /data/tmp
I'll happily help with the script, i know tons of linux and got my Atrix ready to be bricked
Click to expand...
Click to collapse
That's just a symlinked directory. I won't make a difference if you call either.

Yes, just replied to the previous question
Why is the /tmp directory in /data ? That would certainly cause every script to fail.
I'll look at this some more tonight.
Click to expand...
Click to collapse
However, why doesn't the scripts run as wanted...?
# cat /tmp/shell/02.sh
cat /tmp/shell/02.sh
#!/bin/sh
/system/bin/su
/bin/rm /data/ubuntu.disk > /dev/null 2>&1 && echo PASS#
# ls -l /tmp/shell/02.sh
ls -l /tmp/shell/02.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
# /tmp/shell/02.sh
/tmp/shell/02.sh
/tmp/shell/02.sh: not found

flybob said:
Yes, just replied to the previous question
However, why doesn't the scripts run as wanted...?
# cat /tmp/shell/02.sh
cat /tmp/shell/02.sh
#!/bin/sh
/system/bin/su
/bin/rm /data/ubuntu.disk > /dev/null 2>&1 && echo PASS#
# ls -l /tmp/shell/02.sh
ls -l /tmp/shell/02.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
# /tmp/shell/02.sh
/tmp/shell/02.sh
/tmp/shell/02.sh: not found
Click to expand...
Click to collapse
Ah ok my mistake, you didn't quote anything I didn't realize that's what you were responding too
Likely noexec flag causing that issue.
Also, you can't invoke su from inside a shell script. It just doesn't work with this su binary.

yeah, I guess not. I hadn't realized that it wasn't a real 'su' before making this... too bad.
If anyone figures out how to get around that we'll be in business Unfortunately that's way beyond my expertise.

Okay, after fiddling a little bit and talking to a friend I may have solved some of the problems, mainly with the scripts executing and su working.
I will have to rewrite a bunch of things but should report back tonight.

the2dcour said:
Okay, after fiddling a little bit and talking to a friend I may have solved some of the problems, mainly with the scripts executing and su working.
I will have to rewrite a bunch of things but should report back tonight.
Click to expand...
Click to collapse
su -c "command"
You'll have to allow superuser on the phone for every single command.

PM'd you my error. I tried manually editing the permissions, but that didn't work.

Running on GladAtrix2 v3
USB debugging on; USB set to none
Checking device state...
Obtaining temporary root access...pushing shell scripts
-------------------------
EXECUTION FAILED
Unable to chmod scripts.
-------------------------
Press any key to continue . . .
Changed /sdcard-ext to /sdcard in script. Got this error
Checking device state...
Obtaining temporary root access...pushing shell scripts
-------------------------
EXECUTION FAILED
Unable to chmod scripts.
-------------------------
* server not running *
Press any key to continue . . .
Running BETA_ubuntu-1.0.6.4.zip. File extracts to BETA_ubuntu-1.0.6.2 directory. Ran ubuntu-1.5.7.bat
Moved BETA_ubuntu-1.0.6.2 to C:\ Same error

The only easy workaround to that I can see at the moment is to
Code:
adb shell
su
chmod 777 /path-to-scripts/*
ls -l /path-to-scripts/*
make sure all the files are executable (should say rwxrwxrwx)
then remove the bit of code from 1.5.7.bat
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/bin/chmod 6755 /mnt/sdcard-ext/shell/* > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
If anyone can help me fix this problem I should be able to automate the chmod process using ririal's suggestion of su -c. The problem is that there are too many nested quotation marks in this section of the batch file, and I can't for the life of me figure out how to escape quotes so they pass through to adb:
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/system/bin/su -c [U]'/bin/chmod 6755 /mnt/sdcard-ext/shell/*'[/U] > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
The underlined bit is where I need to escape either single or double quotes.

the2dcour said:
The only easy workaround to that I can see at the moment is to
Code:
adb shell
su
chmod 777 /path-to-scripts/*
ls -l /path-to-scripts/*
make sure all the files are executable (should say rwxrwxrwx)
then remove the bit of code from 1.5.7.bat
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/bin/chmod 6755 /mnt/sdcard-ext/shell/* > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
If anyone can help me fix this problem I should be able to automate the chmod process using ririal's suggestion of su -c. The problem is that there are too many nested quotation marks in this section of the batch file, and I can't for the life of me figure out how to escape quotes so they pass through to adb:
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/system/bin/su -c [U]'/bin/chmod 6755 /mnt/sdcard-ext/shell/*'[/U] > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
The underlined bit is where I need to escape either single or double quotes.
Click to expand...
Click to collapse
^ escapes batch, \ escapes shell. Hope this helps. If you zip up and send me the whole process in a single .sh file I can wrap it up in CWM for you.

[How-TO] Manually Install Busybox on the ARC/Play/Neo

hey guys since "one-click" rooting is now available i though i might post a few instructions on how to install busybox on the ARC/Play/Neo devices...
DO NOT RUN THIS IF U ALREADY HAVE BUSYBOX INSTALLED
download the attached file... it contains busybox v1.17.2 & adb files & will install busybox to /system/xbin/
extract the package in some temporary folder
[ Step 0 ] Root ur device
Root ur device using GingerBreak app
[ Step 1 ] Verify that ur device is rooted
browse to the "files" folder where u extracted package and launch the command prompt in the folder (holding down SHIFT key on keyboard right click and select "Open command window here")
keep the device screen unlocked (also might help to keep screen timeout to >5 mins so that u dont miss the superuser prompts)
now execute the following command in the command prompt
Code:
adb shell "su"
a popup/prompt will come on ur device asking for Superuser permissions... click allow...
if u get permissions denied that means either u did not allow Superuser prompt OR the device was not rooted
[ Step 2 ] Install busybox
{A}
in the same command window (from Step 1) execute the following:
Code:
runme.bat
popup/prompt will come multiple times on ur device asking for Superuser permissions... click allow...
if u get any error or "permission denied" in any of the steps check part {B}
{B} (only if the Step 2 A fails)
<if any popup/prompt comes on ur device asking for Superuser permissions... click allow...>
in the same command window (from Step 1) execute the following:
(this will copy busybox to /data/local/tmp/)
Code:
adb push busybox /data/local/tmp/.
(launch adb shell)
Code:
adb shell
(the following commands are to be input in the adb shell itself)
Code:
su
(remounting system as rw)
Code:
mount -o remount,rw -t yaffs2 `mount | /data/local/tmp/busybox grep /system | /data/local/tmp/busybox awk '{print $1}'` /system
(copying busybox to /system/xbin/)
Code:
dd if=/data/local/tmp/busybox of=/system/xbin/busybox
(verifying ownership)
Code:
chown root.root /system/xbin/busybox
(verifying permissions)
Code:
chmod 04755 /system/xbin/busybox
(installing busybox in /system/xbin/)
Code:
/system/xbin/busybox --install -s /system/xbin
(removing temporary files)
Code:
rm -r /data/local/tmp/busybox
[ Step 3 ] Verify busybox installation
in the same command window (from Step 1) execute the following:
Code:
which busybox
this should return
PHP:
/system/xbin/busybox
and
Code:
ls -l /system/xbin/
this should return a LOT of files lists (which are basically symlinks to /system/xbin/busybox)
if u see only one file (dexdump) then installation was not successful

Search for "Busybox Installer" in the market, I think it's as simple as that
Here's the link https://market.android.com/details?id=com.jrummy.busybox.installer

itskapil said:
Search for "Busybox Installer" in the market, I think it's as simple as that
Here's the link https://market.android.com/details?id=com.jrummy.busybox.installer
Click to expand...
Click to collapse
Busybox Installer sometimes installs in /system/bin and messes up toolbox symlinks... also its option to install in /system/xbin doesnt always work...

it works for my ARC, without busybox, Titium backup not working, after install busybox from market, it T backup works.

keijames said:
it works for my ARC, with busybox, Titium backup not working, after install busybox from market, it T backup works.
Click to expand...
Click to collapse
did u try the manual way i posted in 1st post of this thread?
cause i tested this yesterday night on my Arc and TB, Root Explorer, SetCPU, ScreenShot, AbsoluteSystem, all work with the manual way i posted here in OP (1st post of this thread)...

It is much simpler to use the busybox installer, it works and takes much less time

All I did is root my phone installed titanium and installed busybox through titanium and everything works perfect for me no problems watsoever
Sent from my LT15i using XDA Premium App

i would agree with installing from the market its much more easier and hasssle free! i could not gain acesss to titanium backup, but after i installed bb from market, everything works fine

SiRIus[X] said:
i would agree with installing from the market its much more easier and hasssle free! i could not gain acesss to titanium backup, but after i installed bb from market, everything works fine
Click to expand...
Click to collapse
+1, the market one is as good as you can get...
Sent from my arc using tapatalk

PollPixx said:
+1, the market one is as good as you can get...
To TS, thanks for your time and input! Its not flaming you, but the job can be done much easier
Sent from my arc using tapatalk
Click to expand...
Click to collapse
Sent from my arc using tapatalk

can any body upload the 1.19 version for us on mediafire

I just downloaded titanium back up, clicked on Problems? Which then installed busybox
Sent from my LT15i using XDA App

Awesome guide.
Instead of ADB, you can do it all in terminal emulator.
Regarding market installers, they usually work fine.
But some people experience bugs with them or have limited version's to choose from.
So this is a sure fire way to get what you want installed without hassles.

mount not prmited
it say mount not permitted on my sony xperia t3 please help me. been looking for years to install busybox on my phone.

[tutorial] install bash command line on your android

it is not tested on galaxy mini so I will say it beta, please its a request to post a reply whether it is working or not
bash:- an advanced command line than sh, it is colorful so you can differentiate the commands easily
steps for installing bash if you have cwm and want automated process
1:- download the bash command line flashable zip from here
2. download bash enabler script from here
3. flash the bash command line dhlalit11.zip in cwm recovery
4. boot the device normally
5. with the help of script manager execute the bash install.sh script with su privilege
and you are done
Click to expand...
Click to collapse
steps for installing bash if you don't have cwm or want to do it manually
1:- download the bash command line flashable zip from here
2. extract the files to a folder
3. go to /extracted folder/system
4. copy all the files to your system as they are placed
5. open terminal and type chmod 0755 /system/xbin/bash
and its done
Click to expand...
Click to collapse
note:- running bash will not give you root privilege automatically, you will need to type "su -c bash" to go directly into bash with root

reserved

if you don't mind...you can add this line into your updater script
Code:
set_perm(0, 0, 0755, "/system/blabla-the file position");
this one will automatically change the file permission for you so that we don't have to run the script anymore. you can also add symlink("/system/bin/bash", "/system/bin/sh"); to replace our old sh with bash so that everytime we use sh command, we will run bash instead. I was using these trick on my old ROM. however, this step will erase our sh binary file. so we must use it carefully. I usually did these step on a fresh rom installation. you might want to test it by yourself to make sure everything is alright.

I like to make scripts and one more reason is the script first looks for bash in /system/xbin to ensure a proper flash, if bash is not found it will tell the owner
didn't wanted to replace sh

if the purpose is to check whether it was installed correctly or not you can use run_program command instead and make the installation a lot simpler. you can put the script temporary in cache and delete it after the installation complete. or else...you can play with aroma installer. you can design the UI with several option like
1. install bash
2. symlink bash to sh
3. check the bash installation status
4. etc etc (as you like)
aroma could make our usual installation stuff into sumething more fun and interactive ^,^v
anyway, this is only a suggestion. if you want to use aroma you can modify my multi tweak installer. you said that you like to make scripts. it will be easy for you to get the basic stuff on aroma and starting to made one for your self. the link is in my sig. check the akuro or one pack tweak thread and got the aroma from the latest version there.

script run in cwm do not print anything on the UI and the user will not see whether the it was done or not
and I had previously used aroma in my rom patch for galaxy s series but this is just a simple task to do
I will think about it, but sure it will take time and I don't have time as I wanted to update the sticky of this forum then I am working on two mods for my karbonn smart tab 1
but I will for sure figure it out

installing bash
hi i have a Galaxy Centura tracphone and i get this error after executing su-c bash into the cmd via adb......I have installed the flashable zip and ran the installer script....
255|[email protected]:/system/bin # su -c bash
su -c bash
link_image[1936]: 7974 could not load needed library 'libncurses.so' for 'bash
(load_library[1091]: Library 'libncurses.so' not found)CANNOT LINK EXECUTABLE
255|[email protected]:/system/bin #
any ideas?

Bash
Hi, I managed to install the ZIP file (Moto G XT1032) and the script worked as well but after it was done, bash didn't have 755.
I tried adding it manually (as root) but it fails with this error:
Unable to chmod /system/xbin/bash: read-only filesystem
I tried remount using this:
su mount -o remount,rw /
But still no luck, any suggestions?
---------------------------------------------------- UPDATE -------------------------------------------------------
managed to get it via ADB Shell with this commands:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
chmod 755 /system/xbin/bash
still not working because of not having "libncurses.so" which will try to install manually.

ThePlayer10 said:
Hi, I managed to install the ZIP file (Moto G XT1032) and the script worked as well but after it was done, bash didn't have 755.
I tried adding it manually (as root) but it fails with this error:
Unable to chmod /system/xbin/bash: read-only filesystem
I tried remount using this:
su mount -o remount,rw /
But still no luck, any suggestions?
---------------------------------------------------- UPDATE -------------------------------------------------------
managed to get it via ADB Shell with this commands:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
chmod 755 /system/xbin/bash
still not working because of not having "libncurses.so" which will try to install manually.
Click to expand...
Click to collapse
You didn't needed to type whole dev block address, what you were missing was
(su
mount -o remount,re /system)
You were actually mountung the root of your device instead of system partition, which was the reason of non-working

[HOWTO] Installing Superuser/busybox for Mac

Device is pre-rooted, but only lets you do stuff via terminal. I didn't find a way to install Superuser/busybox on Mac, so I decided to make a simple guide. Took me all of 3min to complete, well since I already had the sdk and everything else installed.
You'll need this Superuser.apk, su binary and busybox.apk, dL the files from here http://d-h.st/BBk, once you have the files installed and launch Superuser it will ask you to update the binary, just click yes. Place the 3 files in your sdk/platform-tools folder.
Open Terminal cd sdk/platform-tools
On your Desktop go to Go…Go to Folder and type ~/.android, open adb_usb.ini and add 0x2836 to that file, save and close.
To verify it's listed:
./adb kill-server
echo 0x2836
./adb start-server
./adb devices
Your device should be listed here. If you want wireless adb access so you're not always hooked up to the console do the following, make sure your device is still connected via usb:
./adb tcpip 5555
unplug console
./adb connect xxx.xxx.xxx.xxx (this is the ip of your console, this is listed under manage…system…console info, should be the second line)
You're set, now you can install apps wirelessly to your OUYA console. You need to make the console read/write to do this do the following
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Now we will install su binary, superuser and busybox
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
./adb install stericson.busybox.apk
Should be up and running, if this helped you please thank me or donate a couple bucks

You rock!
I was at this for a while before I found your post. I'm on windows, but this is the only thread I could find that had anything useful Mind if I share this around on other forums?

Just link them back, steps are almost identical for Windows. Just need to remove the ./ from the adb commands
Sent from my HTC One using Tapatalk 4 Beta

WinDroidGuy said:
Device is pre-rooted, but only lets you do stuff via terminal. I didn't find a way to install Superuser/busybox on Mac, so I decided to make a simple guide. Took me all of 3min to complete, well since I already had the sdk and everything else installed.
You'll need this Superuser.apk, su binary and busybox.apk, dL the files from here http://d-h.st/BBk, once you have the files installed and launch Superuser it will ask you to update the binary, just click yes. Place the 3 files in your sdk/platform-tools folder.
Open Terminal cd sdk/platform-tools
On your Desktop go to Go…Go to Folder and type ~/.android, open adb_usb.ini and add 0x2836 to that file, save and close.
To verify it's listed:
./adb kill-server
echo 0x2836
./adb start-server
./adb devices
Your device should be listed here. If you want wireless adb access so you're not always hooked up to the console do the following, make sure your device is still connected via usb:
./adb tcpip 5555
unplug console
./adb connect xxx.xxx.xxx.xxx (this is the ip of your console, this is listed under manage…system…console info, should be the second line)
You're set, now you can install apps wirelessly to your OUYA console. You need to make the console read/write to do this do the following
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Now we will install su binary, superuser and busybox
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/bin/su
cat /sdcard/su > /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
./adb install stericson.busybox.apk
Should be up and running, if this helped you please thank me or donate a couple bucks
Click to expand...
Click to collapse
It's pure luck that this works. There's several things wrong with it.
There's no reason to have two copies of su. There should only be one, and at most have the other be a symlink.
the su binary should be chmodded '6755'.
It works because piping the contents of a file to another file usually leaves the permissions intact. So, sort of works - it leaves a broken copy of su in /system/bin and a luckily working one in /system/xbin.
So, tl;dr, the guide should be:
Code:
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk

rayman said:
It's pure luck that this works. There's several things wrong with it.
There's no reason to have two copies of su. There should only be one, and at most have the other be a symlink.
the su binary should be chmodded '6755'.
It works because piping the contents of a file to another file usually leaves the permissions intact. So, sort of works - it leaves a broken copy of su in /system/bin and a luckily working one in /system/xbin.
So, tl;dr, the guide should be:
Code:
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
Click to expand...
Click to collapse
Thanks, this was my first time doing anything like this...figured I'd try to hack together something from other guides, since I didn't see very many people with the device yet. I will change it now

WinDroidGuy said:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Click to expand...
Click to collapse
This is really pointless, userdata is already RW, cache should be RW, but more importantly you do nothing that would require them to be remounted

I'm not sure what I am doing wrong here. Can anyone help? All the files are there.

TadeoNYC said:
I'm not sure what I am doing wrong here. Can anyone help? All the files are there.
Click to expand...
Click to collapse
The command should be "adb push su /sdcard/su" (pushing su to the sdcard).
Setup wired and/or wireless ADB
(Optional) Put adb.exe in your Windows PATH variable so you can run it from anywhere
Download and unzip the SuperUser files from http://d-h.st/BBk
Open an ADB shell with elevated permissions
Code:
adb shell
su
Mount the system partition as read-write
Code:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Push su to the sdcard
Code:
adb push su /sdcard/su
Open an ADB shell with elevated permissions
Code:
adb shell
su
Cat su into /system/xbin
Code:
cat /sdcard/su > /system/xbin/su
Create a symbolic link to su in /system/xbin from /system/bin (safer/cleaner than just putting su directly in the bin folder)
Code:
ln -s /system/xbin/su /system/bin/su
Set the su permissions to -rwsr-sr-x
Code:
chmod 6755 /system/xbin/su
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Install SuperUser
Code:
adb install com.koushikdutta.superuser.apk
Install BusyBox
Code:
adb install stericson.busybox.apk
Run SuperUser on the OUYA (Make > Software > SuperUser) and allow it to update

Thank you Elmero.
I'm so glad I gave up and went to bed last night. It could not have gone smoother. I followed the instructions for setting up wireless adb from here http://forum.xda-developers.com/showthread.php?t=2272266 as well.
TIP: I wasted an hour or more trying to figure out why PC was not recognizing the OUYA at all. It was the stupid Micro usb port, compunding the fact that all the ports are to close to begin with the micro usb port is very deep. Neither of my Samsung cables worked, fortunately I have a kodak pocket video cam and the cable for that is a few mm longer and worked perfectly.

And who said Kodac isn't relevant anymore?
Sent from my Nexus 7 using xda premium

The link to the Superuser.apk is not working.

pdelponte said:
The link to the Superuser.apk is not working.
Click to expand...
Click to collapse
Working fine for me...
Sent from my HTC One using Tapatalk 4 Beta

WinDroidGuy said:
Working fine for me...
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Not working for me either.
This webpage is not available
The webpage at http://fs1.d-h.st/download/00044/BBk/superuser.zip might be temporarily down or it may have moved permanently to a new web address.
Click to expand...
Click to collapse

There is an issue with the website. Just try back until it connects.
Sent from my GT-P3113 using Tapatalk 2

just to be clear. once its rooted, can i install any android apk to the console? the one that i've bought from android play market?

tanush said:
just to be clear. once its rooted, can i install any android apk to the console? the one that i've bought from android play market?
Click to expand...
Click to collapse
1) It's already rooted.
2) You can already sideload anything you want to it, same as (almost) any android device, whether it is rooted or not. (http://forum.xda-developers.com/showpost.php?p=41796467&postcount=11)

elmerohueso said:
The command should be "adb push su /sdcard/su" (pushing su to the sdcard).
Setup wired and/or wireless ADB
(Optional) Put adb.exe in your Windows PATH variable so you can run it from anywhere
Download and unzip the SuperUser files from http://d-h.st/BBk
Open an ADB shell with elevated permissions
Code:
adb shell
su
Mount the system partition as read-write
Code:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Push su to the sdcard
Code:
adb push su /sdcard/su
Open an ADB shell with elevated permissions
Code:
adb shell
su
Cat su into /system/xbin
Code:
cat /sdcard/su > /system/xbin/su
Create a symbolic link to su in /system/xbin from /system/bin (safer/cleaner than just putting su directly in the bin folder)
Code:
ln -s /system/xbin/su /system/bin/su
Set the su permissions to -rwsr-sr-x
Code:
chmod 6755 /system/xbin/su
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Install SuperUser
Code:
adb install com.koushikdutta.superuser.apk
Install BusyBox
Code:
adb install stericson.busybox.apk
Run SuperUser on the OUYA (Make > Software > SuperUser) and allow it to update
Click to expand...
Click to collapse
So what steps need to be repeated after the OTA?
from my limited understanding I think it should be steps 4 through 12. Or does the system partition not need to be mounted as read-write again?
Sent from my GT-P3113 using Tapatalk 4 Beta

Yup 4-12
Edit
If su is still on the sdcard you can skip 6-8... wont hurt if you do them though...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

professorpoptart said:
Yup 4-12
Edit
If su is still on the sdcard you can skip 6-8... wont hurt if you do them though...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Might be a good idea to do them. The OTA version of such is different from the one in this guide. I had tried keeping the stock su and superuser complained
Sent from my Nexus 7 using xda premium

Do you still have access to the ouya store after SU installed? I heard rumors that access to the store was blocked until root access removed?
Sent from my GT-N7100 using Tapatalk 2

[mod][6T] init.d / services.d framework using Magisk [linux]

This thread will allow you to set up init.d (and services.d) scripts on your phone so they can run at boot time.
Prerequisites
- understanding of what "init.d" scripts mean ...
- your phone must be rooted (see https://www.xda-developers.com/oneplus-6t-unlock-bootloader-root/)
- you must have a working Magisk (see https://forum.xda-developers.com/apps/magisk)
- linux knowledge (I am not a Windows guy but instructions below should easily apply to Windows / PowerShell)
- adb knowledge
If this scares you, stop reading and go play with something else.
Attached zip file contains
- a magisk.img file
- a directory with init.d scripts
- a directory with services.d scripts
You can use the scripts provided or not use (some) of them, or write your own.
What's the difference between init.d and services.d scripts?
The idea is to have 2 directories on your phone with scripts:
Code:
/system/etc/init.d/
/system/etc/services.d/
The init.d scripts are run early in the boot (when Magisk initializes). The scripts in /system/etc/services.d/ will run a bit "later", to be precise: when sys.boot_completed = true.
Important warrning: even when sys.boot_completed = true, this does NOT guarantee that /sdcard is mounted. Your script can "sleep" until /sdcard is mounted if it relies on things on /sdcard. See for example the code in /system/etc/services.d/LS99maxvolumewarning which will show how you can do that.
Scripts in init.d should NOT rely on any of the file systems being mounted !
The framework will run all scripts in parallel. So be careful that you do not write scripts which depend on eachother!
The framework will run all scripts as background processes so that they do not hinder the normal boot of your phone.
Prepare the basic setup
To use the scripts (or your own), you must first create the directories init.d and services.d; to do that open a linux shell and do:
Code:
> adb shell
$ su
# mount -o rw,remount /system
# mkdir /system/etc/init.d/
# mkdir /system/etc/services.d/
# chown 0.0 /system/etc/init.d
# chown 0.0 /system/etc/services.d
# chmod 755 /system/etc/init.d
# chmod 755 /system/etc/services.d
# sync; exit
Putting the scripts on your phone
Download the attached zip file (initd.zip); create a directory in your linux file system and unzip, e.g.
Code:
> mkdir mydir
> cd mydir
> unzip ~/initd.zip
> adb push init.d/ /sdcard/
> adb push services.d/ /sdcard/
> adb shell
$ su
# mount -o rw,remount /system
# mv /sdcard/LS00* /system/etc/init.d/
# mv /sdcard/LS99* /system/etc/services.d/
# chown 0.0 /system/etc/init.d/*
# chown 0.0 /system/etc/services.d/*
# chmod 755 /system/etc/init.d/*
# chmod 755 /system/etc/services.d/*
# sync
# exit
$ exit
Installing the magisk image on your phone
First important remark: I need to turn this really into a proper magisk "module" but I need to study that first. Open a linux shell and do:
Code:
> cd mydir
> gunzip magisk.img.gz
> adb push magisk.img /sdcard/
> adb shell
$ su
# cd /data/adb
# mv magisk.img magisk.img.orig
# cp /sdcard/magisk.img .
# chown 0.0 magisk.img
# chmod 644 magisk.img
# sync
# exit
$ exit
That's all !!! If you now reboot your phone your init.d and services.d scripts will run.
How can I tell this is working?
Each script has a log file in /data/; whose name is LS00 (for init.d) or LS99 (for services.d) appended with the name of the script. That log file is passed as "$1" into the script and the script code can write to this log file using:
Code:
LOGFILE=$1
echo "Hi I am writing to the log" | tee -a $LOGFILE
To check that the log files are there, open a linux shell and do:
Code:
> adb shell
$ su
# ls /data/LS*
And you should see something like:
Code:
16 /data/LS00blockdev 4 /data/LS99bootclean 4 /data/LS99maxvolumewarning 4 /data/LS99sysctl
4 /data/LS00governors 4 /data/LS99callrecording 4 /data/LS99network 4 /data/LS99trimcaches
4 /data/LS00kerneltweaks 4 /data/LS99cputweaks 4 /data/LS99overlays 4 /data/LS99turnoffnightmode
4 /data/LS00procgate 4 /data/LS99enablecallrecording 4 /data/LS99remounts 4 /data/LS99workqueue
4 /data/LS00readahead 4 /data/LS99hdparm 4 /data/LS99resetprop
4 /data/LS00resetprop 4 /data/LS99magiskhide 4 /data/LS99sqlite
To check the contents of the log files, do:
Code:
> adb shell
$ su
# cat /data/LS*
And you will see logging info:
Code:
>> Starting /system/etc/init.d/LS00procgate at 19700110-17:21:12
-- remounting: mount -o remount,hidepid=2,gid=3009 /proc
<< Ending /system/etc/init.d/LS00procgate at 19700110-17:21:12
>> Starting /system/etc/services.d/LS99maxvolumewarning at 20181201-07:34:00
-- slept for 4 seconds waiting for /sdcard/Android
-- disabling max volume warning
<< Ending /system/etc/services.d/LS99maxvolumewarning at 20181201-07:33:58
What's next
Write your own scripts (and share them). Note that scripts must be owned by root (chown 0.0) and have 755 linux permissions (chmod) to run.
How does it really work?
No secrets ... magisk.img is actually a magisk module which runs the scripts. To see the inner details, do the following after you have installed the magisk image and rebooted your phone:
Code:
> adb shell
$ su
# ls -l /sbin/.core/img/template/
total 12
0 -rw-r--r-- 1 root root 0 2018-03-12 21:19 auto_mount
4 -rw-r--r-- 1 root root 935 2018-08-06 17:59 post-fs-data.sh
4 -rwxr-xr-x 1 root root 498 2018-08-05 10:11 scriptwrapper*
4 -rw-r--r-- 1 root root 2750 2018-08-11 12:07 service.sh
Magisk will run the post-fs-data.sh first and service.sh later. Check the code of both of these files to understand how init.d and services.d are ran (using run-parts). If you want more details please read: https://topjohnwu.github.io/Magisk/guides.html#scripts.
Disable ALL scripts from running
If you want to disable any script from running do:
Code:
> adb shell
$ su
# touch /data/noinitrd
To undo this and get your scripts running again, do:
Code:
> adb shell
$ su
# rm /data/noinitrd
What do my init.d scripts do?
Code:
LS00blockdev: change properties of block devices (non rotational, no kernel io stats, ...)
LS00governors: set all CPU governers (to schedutil; which is actually the 6T default)
LS00kerneltweaks: a few basic kernel tweaks + stop debug of kernel modules
LS00procgate: protections against the procgate security vulnerability (thanks to @topjohnwu)
LS00readahead: change the readahead amount on logical disk devicesw
LS00resetprop: reset model, brand, manufacturer (only useful if you would want to get your phone appear externally as a Pixel; check the code)
What do my services.d scripts do?
Code:
LS99bootclean: clean junk and log files
LS99cputweaks: improve scaling governor
LS99enablecallrecording: enable call recording (must be done at every device boot)
LS99execonce: a whole series of settings; this is only executed ONCE
LS99hdparm: increase readahead on /system and /data
LS99magiskhide: hide some packages from seeing root
LS99maxvolumewarning: remove the high volume warning (I am not sure this will always work !!!)
LS99network: TCP transmit queue and congestion control
LS99overlays: enable all overlays automatically (if you use substratum then no need to enable them manually)
LS99remounts: improve file system performance of multiple partitions
LS99resetprop: increase memory used by dalvik
LS99sqlite: REINDEX and VACCUM sqlite database files (the script only runs every 3rd day)
LS99sysctl: optimize linux kernel settings and TCP/IP performance
LS99trimcaches: trim android cache files
LS99turnoffnightmode: reset the night mode to OFF (night mode conflicts with dark mode in newer Google apps)
LS99workqueue: tune kernel work queue

Thanks man I have been trying to get boot scripts to run.

jacksummers said:
Thanks man I have been trying to get boot scripts to run.
Click to expand...
Click to collapse

excuse me for the ignorance, but what is the use of this mod?
Sent from my [device_name] using XDA-Developers Legacy app

isoladisegnata said:
excuse me for the ignorance, but what is the use of this mod?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
At the end of OP he's got a summary of what the different scripts do.

I am stuck here > unzip ~/initd.zip
It keeps saying:
1|OnePlus6T:/mydir # unzip /initd.zip
unzip: can't open /initd.zip[.zip]
Any ideas I extracted initd to the directory where my platform tools are and where I do my system updates am I supposed to extract it somewhere else? How do I create a directory in my linux shell using windows cmd promts?

kirschdog1 said:
I am stuck here > unzip ~/initd.zip
It keeps saying:
1|OnePlus6T:/mydir # unzip /initd.zip
unzip: can't open /initd.zip[.zip]
Any ideas I extracted initd to the directory where my platform tools are and where I do my system updates am I supposed to extract it somewhere else? How do I create a directory in my linux shell using windows cmd promts?
Click to expand...
Click to collapse
Looks like a simple typo "/initd.zip" implies that the file is located in the root directory. "~/initd.zip" would be in your "home" directory. Since I don't know if "/mydir" is defined as your home directory and presuming initd.zip is located there try "unzip /mydir/initd.zip" (no quotes).

Still not working
Base2 said:
Looks like a simple typo "/initd.zip" implies that the file is located in the root directory. "~/initd.zip" would be in your "home" directory. Since I don't know if "/mydir" is defined as your home directory and presuming initd.zip is located there try "unzip /mydir/initd.zip" (no quotes).
Click to expand...
Click to collapse
1|OnePlus6T:/ # cd mydir
OnePlus6T:/mydir # unzip ~/initd.zip
unzip: can't open //initd.zip[.zip]
1|OnePlus6T:/mydir # unzip /mydir/initd.zip
unzip: can't open /mydir/initd.zip[.zip]
Any ideas? How to get this working? I tried both commands to no avail.

kirschdog1 said:
I am stuck here > unzip ~/initd.zip
It keeps saying:
1|OnePlus6T:/mydir # unzip /initd.zip
unzip: can't open /initd.zip[.zip]
Any ideas I extracted initd to the directory where my platform tools are and where I do my system updates am I supposed to extract it somewhere else? How do I create a directory in my linux shell using windows cmd promts?
Click to expand...
Click to collapse
You have to create the directory mydir on your linux machine, not on your phone.

Base2 said:
Looks like a simple typo "/initd.zip" implies that the file is located in the root directory. "~/initd.zip" would be in your "home" directory. Since I don't know if "/mydir" is defined as your home directory and presuming initd.zip is located there try "unzip /mydir/initd.zip" (no quotes).
Click to expand...
Click to collapse
No, not a typo. mydir is on your PC, not on the phone !

foobar66 said:
No, not a typo. mydir is on your PC, not on the phone !
Click to expand...
Click to collapse
How do I create the directory? I'm using a windows device using adb command prompts?

kirschdog1 said:
How do I create the directory? I'm using a windows device using adb command prompts?
Click to expand...
Click to collapse
Search how to create directories in PowerShell ... I am not a Windows guru :crying:

foobar66 said:
Search how to create directories in PowerShell ... I am not a Windows guru :crying:
Click to expand...
Click to collapse
Ok thank you.ill hold off as it appears to be above my pay grade.

foobar66 said:
You have to create the directory mydir on your linux machine, not on your phone.
Click to expand...
Click to collapse
This won't work anymore as magisk doesn't use magisk.img anymore