Related
Koush posted a new thread with the release of CM6 RC3 and this one will no longer be maintained.
Thanks to everyone for their testing and bug reports!
http://forum.xda-developers.com/showthread.php?t=755690
Thx, I hate having to read through all the other pages to get this. PLEASE edit with nightly builds.
Wireless tether works fine if u download it from the market.
Sent from my Incredible using XDA App
Quick question regarding the facebook sync. By reading your summary of the facebook, i wonder if i have a different issue. When i go to accounts and sync, when i click add then facebook. It just goes back to accounts page. Does not even let me enter facebook information. However i am able to use the facebook app.
Is this the bug your referring to, or am i experiencing something different?
killer2239 said:
Quick question regarding the facebook sync. By reading your summary of the facebook, i wonder if i have a different issue. When i go to accounts and sync, when i click add then facebook. It just goes back to accounts page. Does not even let me enter facebook information. However i am able to use the facebook app.
Is this the bug your referring to, or am i experiencing something different?
Click to expand...
Click to collapse
Yes. Does the same to me.
jermaine151 said:
Yes. Does the same to me.
Click to expand...
Click to collapse
Ok, thanks for clarifying. In your summary might want to put something regarding "Unable to add to accounts & sync" , just for others that might be curious.
Wireless tethering worked for me, i just installed the one provided in the 10minute root video again after CM6 was installed. Then tested it and it worked fine. I also have Hydra Rom for stock speed undervoted with wireless N. Noticed when i did tethering it only connected to my laptop in G mode, however i am able to connect to my router in strictly wireless N broadcast.
Had this problem last night which forced me to revert back to stock firmware.
I plugged in my phone to charge at 11 PM. Then at 12.30 ish AM, i heard my phone vibrating. I looked and it rebooted. So i let it be, then few minutes later I heard it again. Then I decided to revert back to Stock.
Thinking that it was maybe caused when charging the battery. That the batt got 100% then rebooted? Not quite sure.
I can test again if needed.
Good idea.
Thanks!
You are most welcome!
Thank You very much
what time is the nightly build and what time standard/zone?
i would love to try this but cant without bluetooth and am hoping it makes it into the next build. in my state they are cracking down on using your cell phone without a handsfree and giving big tickets to make up for budget shortfalls. so i need bluetooth. (i am too deaf for speakerphone, especially on the incredible, its not that loud)
i am excited, especially now i am 90% sure i am keeping the DINC now that the DX is officially going to be a ***** to root and no roms looks likely. and i dont know why blogs that pimp the phone keep saying "root is still inevitable" but i dont agree with that, if you cant get into the boot loader we would have never rooted the incredible and it only makes sense motorola has locked down the backflip root methods and made sure rooting will also be hard.
i just really want a bigger screen and a fast gpu, other than that, the DINC is the best.
cray1000, I edited the OP to answer your question on the build times.
You guys are all VERY welcome! I'm glad I can help make any of this easier. I can't develop (yet ) So this is my contribution for the many things I get from XDA, Koush and the other developers!
jermaine151 said:
cray1000, I edited the OP to answer your question on the build times.
You guys are all VERY welcome! I'm glad I can help make any of this easier. I can't develop (yet ) So this is my contribution for the many things I get from XDA, Koush and the other developers!
Click to expand...
Click to collapse
thanks man! keep up the good work!
and nice, based on your answer on the first post, we have a new build as of a couple hours ago, anyone running it yet? anyone have a revised bug list? should we discuss that here or in the other thread?
It would appear that the incredible has been removed from the buildbot cycle as of the latest build. A version was built today (check the dates) but looking here: http://buildbot.teamdouche.net/tgrid it's no longer listed
I hit check for update on the rom in Rom Manager, but it didnt say there was new rom. The last one under nightly builds in rom manager still has same time stamp as one i got last night.
killer2239 said:
I hit check for update on the rom in Rom Manager, but it didnt say there was new rom. The last one under nightly builds in rom manager still has same time stamp as one i got last night.
Click to expand...
Click to collapse
if you clear download cache and redownload it should be newer, someone posted the repo and it clearly showed a date and time of today even though the file name still said 7-8 or 7-9 on it the time and date were 7-10 unless it was mirrored then or osmething.
killer2239 said:
I hit check for update on the rom in Rom Manager, but it didnt say there was new rom. The last one under nightly builds in rom manager still has same time stamp as one i got last night.
Click to expand...
Click to collapse
The filename doesn't change. Just clear the download cache in ROM manager and then choose download ROM, reinstall as usual. I guarantee its a different file. Updating OP with what my current build version shows.
Sometimes download of apps in market just stalls.
Some apps fail to install. (android-vnc)
Sometimes screen doesn't register touches until rotated.
jermaine151 said:
The filename doesn't change. Just clear the download cache in ROM manager and then choose download ROM, reinstall as usual. I guarantee its a different file. Updating OP with what my current build version shows.
Click to expand...
Click to collapse
Deleted the CM6 zip file from the sd card, then redownloaded the nightly build. Installed and noticed the rom version now has 7/11 as the date instead of the zip files number. So thats good. I see you crossed out the green light while charging bug. Thats only difference i have noticed thats been fixed.
I really hope they are concentrating on Facebook, Camera, GPS bug the most. Thats the biggest deal breaker for most i know.
Similar to my thread based around CM 6.1 progress and reports on the latest nightlies, I present what should become a telling collection of anecdotal evidence.
Ruby 1.1.4 was released and many users are very satisfied with its performance. As 1.1.1 now appears old hat, and its original thread is waning and reads like War and Peace, please refer to this post for future observations. What I would like to see is:
1. Bugs encountered that are repeatable only after a full wipe
2. Glowing reviews and/or recommendations for bits some users are unfamiliar with
3. Odd errors that perhaps we can assist with (ie. known fix)
4. Chatter about the upcoming release of Ruby 1.2 for the Inc
I look forward to any and all suggestions, input, feedback, and all around camradery. Also, keep the flames to yourself
Obligatory links:
Ruby 1.1.4
http://bit.ly/cpnBmJ
Google Apps Package
http://bit.ly/9Qztde
RIL update for 3g issues:
http://forum.xda-developers.com/showthread.php?t=796794
Themes specifically for 1.1.4:
http://m.droidforums.net/forum/cvpcs/87324-unofficial-ccrom-builds.html
Well, thanks for the opportunity...
I have been using Ruby 1.1.4 as my daily driver for the past two weeks or so and find it to be perfect for my use. Although I have strayed to check out the latest and greatest, HD, Z, Feather, etc. I always come back to Ruby.
Everything works. I've added the popular mods, i.e. signal fix, etc., removed some apps that I don't like or use and I'm really happy with Ruby overall. Looking forward to 1.2.
Can't say the same for some of the vanilla apps like mail and gallery, but there are suitable replacements for those available via the market.
My thanks to the Ruby crew...
jc
Seems the gapps link is down.
Is this a full build or just an update to 1.1.1?
letum00 said:
Seems the gapps link is down.
Click to expand...
Click to collapse
Yea it's down, teamdouche doesn't have any gapps listed at the moment. A quick search I found a mirror but have not confirmed this is the same thing. Use if you like, otherwise wait for someone to provide a mirror.
http://uploading.com/files/aac91mfa/gapps-hdpi-20101008-signed.zip.html
StirCwazy said:
Yea it's down, teamdouche doesn't have any gapps listed at the moment. A quick search I found a mirror but have not confirmed this is the same thing. Use if you like, otherwise wait for someone to provide a mirror.
http://uploading.com/files/aac91mfa/gapps-hdpi-20101008-signed.zip.html
Click to expand...
Click to collapse
Here's the copy of Google Apps that were originally posted with 1.1.4:
gapps-hdpi-20100930-signed.zip
StirCwazy said:
Is this a full build or just an update to 1.1.1?
Click to expand...
Click to collapse
Full build. Running stable so far, no noted issues.
I've been running 1.1.4 for a couple of days. I don't use Bluetooth very often, so I've only installed the RIL patch. Together with ADW Launcher I'm very happy with this ROM.
The only bug (or missing feature) I found is in regards to the Pattern lock. When I enable it, the unlock screen no longer shows up so I can't use the music controls. However, if I enable the PIN-base lock the unlock screen works just fine. In all Sense ROMs whenver I enable the Pattern lock the unlock (tabular) screen does not go away. I filed a bug at CC ROM's website. This seems like something trivial, so hopefully they'll get it in in the next release.
EDIT: You might want to add to the OP the url link for the RIL update, I've been using it and haven't experience any 3g issues.
http://forum.xda-developers.com/showthread.php?t=796794
Ruby 1.1.4 still says it's 1.1.1 in my about screen.
Androidnite said:
The only bug (or missing feature) I found is in regards to the Pattern lock. When I enable it, the unlock screen no longer shows up so I can't use the music controls. However, if I enable the PIN-base lock the unlock screen works just fine. In all Sense ROMs whenver I enable the Pattern lock the unlock (tabular) screen does not go away. I filed a bug at CC ROM's website. This seems like something trivial, so hopefully they'll get it in in the next release.
http://forum.xda-developers.com/showthread.php?t=796794
Click to expand...
Click to collapse
As far as I know, it's less of a missing feature than a feature in itself. CM, ShadowROM, all the AOSPs I've tried have that "feature."
However, I too am annoyed by it xD But it seems intentional.
Where can I find the RIL patch?
Sent from my Incredible using XDA App
Been running ruby 1.1.4 with adrynalyne's battery_aosp kernel for the past week. No problems. Tried kingz aosp #2 kernel but it wasn't as stable. UV, no OC.
Sent from my ADR6300 using XDA App
pmdied said:
Where can I find the RIL patch?
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
Url is on my previous post...is the same for CM and Ruby. Has also been added to OP.
Nice to see my patch is still doing something for you guys. I wonder if they will ever release an official version again.
I almost feel like pulling down the code and compiling a version with the fixes in it...
Can we use the Gapps zip from 1. 1. 1....
How is GPS working in this version? I don't know if it was the RIL or 1.1.1 but I noticed that the cell triangulation (ie. the blue circle that pops up when you first open maps) broke somewhere along the way. Pinpointing GPS would work but it was very slow (takes at least a minute or more).
At first I didn't mind the wait but I realized it caused a lot of apps that require your location (Poynt, Where, etc.) to stop working.
Odd thing is on a clean install GPS pinpointing would always be almost instant but subsequent to that it would get slower and slower. Curious if anyone else is encountering the same.
I have three questions about 1.1.4:
Does EMMC work on Ruby? I mean like in gallery and music. Itt works on Cyanogen but now Shadowrom or inc does. Thats the biggest determining factor of my using Ruby.
is it possible to get the black vanilla messenger from Cyanogen?
Also, the black bar theme that Ruby has, gives you the HTC battery icon, however I prefer the vanilla android battery. Is it possible to make a theme from the changes I made in Cyanogen?
Also if you want EMMC to mount on windows, this fix was posted I dont know if it works on ruby, if you're brave you can give it a try:
http://code.google.com/p/cyanogenmod/issues/detail?id=2236
Ok. So im a little confused on the bluetooth issue. Is there a link to the fix or no?
Sent from my ADR6300 using XDA App
Stoney 666 said:
Can we use the Gapps zip from 1. 1. 1....
Click to expand...
Click to collapse
I would suggest using the one posted in the 1.1.4 download link. The op in that link also suggested to use only 1.1.4 themes...meaning that if the 1.1.1 you were using has not been ported over to 1.1.4 don't try to install it.
s197 said:
How is GPS working in this version? I don't know if it was the RIL or 1.1.1 but I noticed that the cell triangulation (ie. the blue circle that pops up when you first open maps) broke somewhere along the way. Pinpointing GPS would work but it was very slow (takes at least a minute or more).
At first I didn't mind the wait but I realized it caused a lot of apps that require your location (Poynt, Where, etc.) to stop working.
Odd thing is on a clean install GPS pinpointing would always be almost instant but subsequent to that it would get slower and slower. Curious if anyone else is encountering the same.
Click to expand...
Click to collapse
I've had the 1.1.4 (clean install) for 4-5 days, so hard to tell, but on Tuesday I used the GPS with Maps for about an hour and it worked great. I'll report in a few weeks if I ever use the GPS again.
mikeymop said:
I have three questions about 1.1.4:
Does EMMC work on Ruby? I mean like in gallery and music. Itt works on Cyanogen but now Shadowrom or inc does. Thats the biggest determining factor of my using Ruby.
is it possible to get the black vanilla messenger from Cyanogen?
Also, the black bar theme that Ruby has, gives you the HTC battery icon, however I prefer the vanilla android battery. Is it possible to make a theme from the changes I made in Cyanogen?
Also if you want EMMC to mount on windows, this fix was posted I dont know if it works on ruby, if you're brave you can give it a try:
http://code.google.com/p/cyanogenmod/issues/detail?id=2236
Click to expand...
Click to collapse
EMMC works on Ruby. However, it seems that you can only mounted on a Mac, not on a PC. I connected the phone to my PC at work and it only recoginized the SD card. However, when I connected it to my Macbook it detected both EMMC and SD card.
By "black vanilla messager" you are referring to the Text Messaging app or the Google Talk? If you are talking about text messaging, there is a setting that allows you to change the background to black. In regards to the themes, I would suggest you stick with the themes made for 1.1.4 (as in the download link). If you want specific changes to the them the OP suggested contacting the created of the specif theme you are interested in.
mapko11 said:
Ok. So im a little confused on the bluetooth issue. Is there a link to the fix or no?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
If you go to the url link that has the "RIL update" in the first post it has a link to another thread where you can download the Bluetooth fix. It is called "BT" something.
Okay thank you, for the info. Is Ruby more stable then Cyanogens stable release?
Hi All,
I wanted to learn how to build an AOSP ROM for my Droid Incredible (original version), and I was finally able to get a working build today (i've been at it for more than a month on and off when I have time).
I downloaded gingerbread-release and used the CM overlay to get the vendor-specific stuff. The proprietary files were pulled from my working OMGB phone (which I understand borrows a lot from cyanogen; well-- the kernel at least).
My problem is that (1) I can't get any audio to play, (2) any time I try to play a video (like Youtube) I get a force close, and (3) the camera wont work.
I'm pretty sure (3) is a totally different problem, as I've seen lots of ROMs where the camera won't work.
Does anyone have any point that I could start on this? I've posted my logcat here: pastebin.com/GPqpD8N3
(sorry-- I'm not allowed to post links yet.)
I googled it but I'm having trouble finding anything pertinent.
Thanks in advance for any assistance you anyone can provide!!
EDIT: By the way, since this post I have changed my setup. All of my proprietary modules are from the CM nightly build now, instead of having modules from OMGB and and overlay from CM. I did this to make it more consistent in case I run in to any more problems.
Sorry -- additional detail that I meant to add in the post (but it won't let me re-edit for 5 minutes):
The bottom of the log shows me trying to play a song in the music player. From what I can tell, /system/bin/mediaserver is crashing and performing a stack dump; however I don't know why or how I can fix it.
It will not play any ringtones either, but the DTMF tones *do* sound when you press on the digits, and the phone/speakerphone work fine as well.
I just figured it out myself... in the logcat there is the line:
frameworks/base/media/libstagefright/omx/OMXMaster.cpp:90 err != OMX_ErrorNoMore
if you go to that file, in line 90:
CHECK_EQ(err, OMX_ErrorNoMore);
I just commented it out and sound works fine.
Now if I can get the camera working... any ideas?
Hmm I know the bugglas beast nightly's had the camera issue.
Sent from my ADR6300 using XDA App
Thanks, @Kiboe for the reply. I found the fix last night (right after I posted ) on xda-developers through Google Groups.
I implemented @dferreira's suggestion, and it compiled just fine. Now I have a working camera, but video still isn't working. (Also accelerometer isn't working, but I believe I have already found the answer for that).
Hey folks,
Since no one else has done so, I just checkout CM7 sources from GitHub and made a fresh build. It seems to be working pretty well on my VZW Droid3, except for the camera which doesn't work at all. Anyway, I thought I'd share in case anyone else wants to test.
It's just stock CM7.2 + Hashcode, if you want other tweaks like OC you'll have to port them from other roms. I'd like to get the camera working but don't expect much as I don't have a lot of free time.
File: cm-7-20120708-UNOFFICIAL-solana.zip
MD5: 38b6adfd675786dd04fd11c2fae5cd6c
Mirrors:
http://www.MegaShare.com/4374349
http://uploadhero.com/dl/Wj3lsp2b
http://speedy.sh/SFNPj/cm-7-20120708-UNOFFICIAL-solana.zip
http://depositfiles.com/files/o0gdxy8nm
reserved
Thanks! Nice to see attention on CM 7.2 again, especially with the old build's links down. Have there been any changes/updates since the Hash build last year (August?)?
Sent from my DROID3 using xda app-developers app
I'm assuming you tried the CM9 camera fix on CM7? Seems overly obvious, but I love CM7 on my DX and that's why I'm using it as my DD over the D3.
DrWowe said:
Hey folks,
Since no one else has done so, I just checkout CM7 sources from GitHub and made a fresh build. It seems to be working pretty well on my VZW Droid3, except for the camera which doesn't work at all. Anyway, I thought I'd share in case anyone else wants to test.
It's just stock CM7.2 + Hashcode, if you want other tweaks like OC you'll have to port them from other roms. I'd like to get the camera working but don't expect much as I don't have a lot of free time.
Click to expand...
Click to collapse
Very nice!
Can't download now, but someone test to see if a 3rd party camera app works. That was the case in the last version of CM7 I used on the D3, stock camera didn't work but others did (Camera Zoom FX for example).
I'll be flashing this ROM fairly soon (soon as in, tonight) and I'll give a third party camera app a try. I'll get back to you as to the results.
UPDATE 1: Just tried a third party camera app, no dice. Same black screen as the stock camera.
UPDATE 2: Notification LED is stuck on. Poking around the settings to see if I can get it to turn off...
same as Hashcode CM7.2 ver
- no 3G data in GSM
- no possible to save new APN
+ The camera360 app. functioning perfectly
This patch here did the trick:
GSM Patch:
http://www.2shared.com/file/ilFRwlr1/GSM_PATCH_1116_WithData.html
It's basically the GSM patch from an older thread about CM7. It works fine for 3G and calling and whatnot, and I haven't seen anything go horribly wrong with it. Obviously, I'll report back if anything does.
And my previous statement about a 3rd party app not working, I have to retract that statement, I just installed FxCamera and it works just fine. Barcode scanner seems to be in working order too.
Still testing, will report back if I encounter any other bugs.
UPDATE: Front Facing Camera definitely doesn't work. Same deal as on CM9 before, it comes up with nothing but static.
switchblade920 said:
This patch here did the trick:
GSM Patch:
http://www.2shared.com/file/ilFRwlr1/GSM_PATCH_1116_WithData.html
It's basically the GSM patch from an older thread about CM7. It works fine for 3G and calling and whatnot, and I haven't seen anything go horribly wrong with it. Obviously, I'll report back if anything does..
Click to expand...
Click to collapse
it isn't, (first thing i tried that patch)
Well, that's the patch that I used and it's working, but I did have to manually add the APNs in order to get 3G.
EDIT: I just read your signature properly. My phone is an XT862 and yours being an XT860 is probably why the patch isn't working for you. The two phones are somewhat different, but only in really subtle ways. I always hear about GSM patches being incompatible between the two. The patch that I linked seems to be for the XT862 and wont work with the XT860.
switchblade920 said:
Well, that's the patch that I used and it's working, but I did have to manually add the APNs in order to get 3G.
EDIT: I just read your signature properly. My phone is an XT862 and yours being an XT860 is probably why the patch isn't working for you. The two phones are somewhat different, but only in really subtle ways. I always hear about GSM patches being incompatible between the two. The patch that I linked seems to be for the XT862 and wont work with the XT860.
Click to expand...
Click to collapse
thanks for your reply probably you right
the main issue is when try to add new APN, normaley the MCC & MNC values are there, but If they are not (like in that case) it is useless because the APN will not be saved.
I'd love to CM7 running on this phone. Have you tried this fix posted for the DX? I currently run CM 7.1.0 on my DX and it's perfect... But it doesn't have a FFC to figure out.
http://www.droidxforums.com/forum/cyanogenmod/31280-camera-camcorder-fix-cm7.html
Well, if anyone could possibly tell me where to start, I could probably look into the whole FFC issue, see if there was anything I could possibly do (with my limited knowledge).
switchblade920 said:
Well, if anyone could possibly tell me where to start, I could probably look into the whole FFC issue, see if there was anything I could possibly do (with my limited knowledge).
Click to expand...
Click to collapse
you would want to look at ricks2 framework edits for ics i think, cm9 had an identical problem with sim cards not being found, no mcc values etc.
boazal said:
thanks for your reply probably you right
the main issue is when try to add new APN, normaley the MCC & MNC values are there, but If they are not (like in that case) it is useless because the APN will not be saved.
Click to expand...
Click to collapse
u can set them yourself
redsox985 said:
I'd love to CM7 running on this phone. Have you tried this fix posted for the DX? I currently run CM 7.1.0 on my DX and it's perfect... But it doesn't have a FFC to figure out.
http://www.droidxforums.com/forum/cyanogenmod/31280-camera-camcorder-fix-cm7.html
Click to expand...
Click to collapse
I wanna try this which one should I use the newest one? Not sure which nightly this cm7. 2 is based off of but they have different fixes depending on which build ur running
Sent from my DROID3 using Tapatalk
huhu1312 said:
u can set them yourself
Click to expand...
Click to collapse
you actually cant add/edit any apn information since it wont save or even seem to read/load values from the apns-conf.xml unless the sim card is recognized/working. it looks alot like the same problem we xt860 owners had on ics, once the sim card was recognized (thanks to rick2) everything worked.
Willis111 said:
you actually cant add/edit any apn information since it wont save or even seem to read/load values from the apns-conf.xml unless the sim card is recognized/working. it looks alot like the same problem we xt860 owners had on ics, once the sim card was recognized (thanks to rick2) everything worked.
Click to expand...
Click to collapse
can you post Rick#2 link ?
boazal said:
can you post Rick#2 link ?
Click to expand...
Click to collapse
I could but I would have to use the forum search which is available to all... Try "xt860 CM9 Working Data" as your search string, the thread was called something like that.
Willis111 said:
I could but I would have to use the forum search which is available to all... Try "xt860 CM9 Working Data" as your search string, the thread was called something like that.
Click to expand...
Click to collapse
Thanks!
http://forum.xda-developers.com/showthread.php?t=1465297&highlight=xt860+cm9+working+data
(for CM9 NOT CM7)!
New Builds - December 30 - I don't know if anything changed, I just sync'd repos and compiled it. But it's newer, eh!
MAKE SURE YOU WIPE DATA/CACHE AND SYSTEM AND INSTALL THIS ROM TO A FRESH ROM SLOT. Don't complain about non-working or strangely behaving apps if you flash over an old install without trying this first.
Based on the work of the All-Powerful Hashcode (source), here are fresh builds of AOKP JB and CM10.
Still no working camera. However, includes the sensor fix from Jarveson (Thanks!). HW codecs re-activated (thanks Hashcode!)
Updated repos, minor tweaks to get it to build correctly (Solana github repo doesn't build successfully as-is). See the posts ~ pg 153 of Hashcode's official thread.
Use gapps 20121011 available at your nearest filehost.
Download:
/mediafire/solana
For our friends on the other side of the Great Firewall:
CM10 Dec 15
These are ALPHA test builds (as noted by Hash) and a constant work in progress. I recommend flashing into a secondary ROM slot until you feel comfortable.
Thanks to Hashcode, dhacker, jonpry, jarveson, Google, AOKP, CM and everyone else who made this possible.
Kernel Included? version?
Gapps included?
Thanks for your work on the D3
Oh yeah, FIRST
Always wanted to do that
Thanks for this! I will finally test it today (didn't have time).
Maybe you're interested in including the fix I use for making the D3 wake with keyboard keys also.
For me at least, it was one of the first things I missed on kexec ICS/JB.
http://forum.xda-developers.com/showpost.php?p=33639782&postcount=1333
Will report back later today
If possible, could you please make a CM10 version?
AOPK has
1) No profiles
2) Brightness toggle is on separate row
3) Can't use 4x4 unlock slide
4) ....
I'm running it. So far so good.
Sent from my XT862 using xda app-developers app
DoubleYouPee said:
If possible, could you please make a CM10 version?
AOPK has
1) No profiles
2) Brightness toggle is on separate row
3) Can't use 4x4 unlock slide
4) ....
Click to expand...
Click to collapse
Awesome build, but I'm looking forward for a Cyanogenmod build as well.
CM build
I'll start a CM10 build tonight or tomorrow, depending on how I'm feeling. Been a busy weekend working and lots of late nights getting just AOKP to work cuz it's my primary.
In theory it shouldn't be too difficult, because AOKP is CM based. But I'm no professional, I just do this for the enjoyment.
Will keep you guys posted.
sylentprofet said:
I'll start a CM10 build tonight or tomorrow, depending on how I'm feeling. Been a busy weekend working and lots of late nights getting just AOKP to work cuz it's my primary.
In theory it shouldn't be too difficult, because AOKP is CM based. But I'm no professional, I just do this for the enjoyment.
Will keep you guys posted.
Click to expand...
Click to collapse
If it's CM based I wonder why they've removed so many features
Thanks!
DoubleYouPee said:
If it's CM based I wonder why they've removed so many features
Thanks!
Click to expand...
Click to collapse
... because... because... it's more... aerodynamic?
(CM10 building as we speak)
sweet!,
what about the bluetooth issue? all gone?
I do understand that you are working off of Hash codes work....
Just a heads up. I do believe you are required to list links to source for GLE standards. This includes link to source for ROM as well as Kernel.
Great work thus far and thank you for your efforts:thumbup:
Sent from my Galaxy Nexus using xda premium
Awesome CM 10 build, enjoying the proximity sensor fix, but didn't you say that MMS was fixed on Verizon? It still says "Invalid recipient" for me. Anyone else?
hilokilo said:
Awesome CM 10 build, enjoying the proximity sensor fix, but didn't you say that MMS was fixed on Verizon? It still says "Invalid recipient" for me. Anyone else?
Click to expand...
Click to collapse
I've been talking to another user about this. Turns out that the stock messaging app is still affected by the MMS bug. I've always used a third party app so I didn't notice when I did testing. Sorry everyone.
But it works with a third party messaging app definitely. GoSMS is my present choice. Used to be Handcent but it's gone down the drain IMO the past year.
Yes mms no workie in stock. Go sms seems to work though.
Sent from my XT862 using xda app-developers app
Hmm MMS works on the 883 radio from T-Mobile. Maybe it's something in build.prop? Maybe it's APN settings? I think CDMA carriers still use APNs.
Already went down the road of apn. Everything was correct in mine. Went ahead and deleted and re entered, no change in built in sms/mms app. Wouldn't know what to check in build.prop.
Sent from my XT862 using xda app-developers app
Installing CM10 version now.
Btw it baffles me you guys still use "MMS" :silly: that's like saying you still use CDs :laugh:
edit: flashed right over my old CM10 build..lets see what happens. It works for now
edit2: First thing I noticed, my generic.kl didn't work. Apparently, now I have to edit omap4-keypad.kl. No idea why:
http://dl.dropbox.com/u/22072961/Droid 3/omap4-keypad.kl
DoubleYouPee said:
Installing CM10 version now.
...
edit: flashed right over my old CM10 build..lets see what happens. It works for now
...
Click to expand...
Click to collapse
I did the same and it seems to be working well. I've only had one phone call and the phone app did crash when the call ended. I *think* the called party hung up first. The sensor fix is very nice - I was somehow regularly getting into the settings menu with my ear and changing stuff before it
I think the only thing I miss at this point is the audio out via the car dock special usb cable. I've thought about trying to help figure that one out, but the last programming I did was in the late 80's in C, so the learning curve is gonna be kinda steep. I have installed the sdk on my Fedora machine. We'll see if I can get motivated to figure out how to actually do anything with it.
djbolden said:
I did the same and it seems to be working well. I've only had one phone call and the phone app did crash when the call ended. I *think* the called party hung up first. The sensor fix is very nice - I was somehow regularly getting into the settings menu with my ear and changing stuff before it
I think the only thing I miss at this point is the audio out via the car dock special usb cable. I've thought about trying to help figure that one out, but the last programming I did was in the late 80's in C, so the learning curve is gonna be kinda steep. I have installed the sdk on my Fedora machine. We'll see if I can get motivated to figure out how to actually do anything with it.
Click to expand...
Click to collapse
If you understand C well, you might actually not have too hard a time, especially if Android is C++. I have no idea though.
set up
if anyone would like to get their machine going for development, i made a blog post (my first serious one ever) about setting up Ubuntu 12.10 properly to compile Android from source.
https://soupdawg.wordpress.com/2012...-for-building-android-jellybean-all-variants/
all the other guides i've seen are up to 12.04, and setting up the correct JDK is unique on 12.10
good luck everyone!
NOTE: my process.phone always crashes after calls. it doesnt seem to impact anything, i still run it day to day just fine. i'll try to track it down and see whats up. i think it's because of the hack i had to do to get the ROM to compile correctly. frameworks/base in its natural state from the repo causes build errors.