Hi,
I came from Stock Android 2.3.6 JW6 and flashed Team Android Jelly Bean V6 on my GT-I9000. Now I do not have a connction to the mobile network (which is T-D1 in Germany).
I must not put in my PIN, so I thingk the system cannot read my mobile provider's SIM card ...
any help or tipps? I just looked in the forums for TAJB, but found nothing ...
Thx,
Pauli
Hey
For using TAJB u need to come from cm9 (as far as the old versions are flashed..)
Plus you can try toggling aeroplane mode..if it don't work..then downgrade to2.3.6 and REMOVE ur sim pin..upgrade to cm9...and then flash TAJB...
And toggle aeroplane mode for mobile data...(after following the above steps..on TAJB rom)
Cheers
If my post helped, don't mind hitting the Thanks button..
Thanks, worked perfectly ...
Pauli
Related
I just flashed from ICSSGS to JVU by odin because i really like the stock for battery consumtion , slowness and i just hate the ForceCloses, alls fine just i dont have 3g HSDPA just EDGE, can make calls and sms .
I tried to do the *#2263# trick posted in Darkys forum to get 3g again but it dont worked.
Changed modems to one that support 3g and it didnt either.
Changed to Custom roms stock based like Darkys jvu-Re and its the same
I have a GT i9000T from telcel
please i need help to get my data connection as i had before
I dont remember GB settings so much since i've been in icssgs for a long time now, but in call settings (or something like that) try to find a setting wich allows you to change between: UMTS only, HDSPA only or HDSPA + UMTS (something like that). Try selecrting HDSPA only. It should work.
Settings>wireless n networks>mobile networks>access point names
Left soft key - reset to defaults !
jayeshup said:
Settings>wireless n networks>mobile networks>access point names
Left soft key - reset to defaults !
Click to expand...
Click to collapse
Ill try this when i arrive home and update the resulta
Btw which one g:ves mi moré battery performance, stock ir custom rom like icssgs, i like ics customization
custom gingerbread rom !
I just instaled simplicity base rom jvu and tested xvu re rom darky with diferentes módems and its the same, just edge
Im now back to icssgs 4.2 and i notice that i need ti flash a Modem called kc1 ti get radios....ir may be the answer but i cant find a non cm7 one, i need a non cyanogenmod 7 bcz i get a error while flashing it
Enviado desde mi GT-I9000 usando Tapatalk
I answer my self i just instaled UGKG1 and 3G an hdspa worked thanks for all
Sent from my GT-I9000 using Tapatalk
Please explain what have you done and how!
I have same problem with my GT...
Just got it on 2.3.3 and no 3G, only EDGE
Sand from T-Mobile Galaxy Tab
Download the modem from perkafiles or 4shared for cwm, you must be rooted and install it from the recovery choosing instal file rom sd card, it must be in a Zip file, And for last check your apns
Sent from my GT-I9000 using Tapatalk
hi guys,
i have problem using this Floyo (2.2.5) v1.0b HACKDROID. i cant acess the internet,market and can't download the mms. when i check my apns setting here WIRELESS>MOBILE NETWORK>APN its appear blank! ive tried to download the setting for my network(3gs and gprs) its still blank(the operator didnt ask anything to save). i can't add any apn for my mobile network even in manual menthod. can someone help me with this pls?. im still noobs on this one.
for information my phone is
android version: 2.2.5
Baseband version: xxxxx-xxxxxxxxx-53404015
karnel Version:2.6.29
You have to manually input that sweetie. If my memry is right hackdroid refers to android 2.3. I suggest you try FroyoPro its the most updated froyo nased from dx froyobread.
aww... i didnt notice that was the latest one. thanks!! i will post anything if theres any problem on this one.. regards..
Xperia X8 upgrade to Floyo 2.2.5 wifi issue
Dear all,
I have just upgraded my Xperia X8 stock os to Floyo 2.2.5...everything seems to work fine except wifi...it detects my Windows 7's created adhoc network (with connectify, it was working with stock os) on wifi but disconnects right after authenticating...so much confused...Plz Rescue...
Regards
Warsi said:
Dear all,
I have just upgraded my Xperia X8 stock os to Floyo 2.2.5...everything seems to work fine except wifi...it detects my Windows 7's created adhoc network (with connectify, it was working with stock os) on wifi but disconnects right after authenticating...so much confused...Plz Rescue...
Regards
Click to expand...
Click to collapse
Hey Warsi,
Welcome to XDA!
I use FroyoPro2.5 and have no issues.. I'd upgrade to it for a fully working rom..
If you have an unlocked bootloader, just install alfsV8a-GDX kernel and the fix3 addon for a complete working setup.
Good luck.
Hey I need help with my phone's network compatibility
My sister gave me her old Galaxy S I9000 and everything worked fine with her she never lost reception
But when she gave it to me i immediately came to this forum and flashed it to ice-cream sandwich 4.0.4 the Extraordinary kernel i think
And i noticed i could only get 2G signals
i then flashed the rom to aosp same problem then aokp same problem
i now have Slim because i prefer that but it still has the same issue
i looked online about this problem i haven't found any solution
i did find one tutorial that enabled you to change the S to pick up a different band of network that was previously locked or something
i tried that and it didn't work i couldn't open the settings to it
any help is greatly appreciated thanks in advance
Rat.2 said:
Hey I need help with my phone's network compatibility
My sister gave me her old Galaxy S I9000 and everything worked fine with her she never lost reception
But when she gave it to me i immediately came to this forum and flashed it to ice-cream sandwich 4.0.4 the Extraordinary kernel i think
And i noticed i could only get 2G signals
i then flashed the rom to aosp same problem then aokp same problem
i now have Slim because i prefer that but it still has the same issue
i looked online about this problem i haven't found any solution
i did find one tutorial that enabled you to change the S to pick up a different band of network that was previously locked or something
i tried that and it didn't work i couldn't open the settings to it
any help is greatly appreciated thanks in advance
Click to expand...
Click to collapse
hi man. i'm suffering from this problem since a long time. and i didn't find any solution for it till now. i'm from Jordan and i use Orange sim card and it didn't work with me. but when i used Zain sim card it worked with me.
the only 2 ROMs that worked for me in 3G connection in Orange was Dark Knight 3 and ICSSGS.
gd luck
Hello
I to have the same problem.. following is my flashing sequence
darky rom (3G working) -> team hacksung (3G working) -> CM9 nightly (no 3G) -> CM7 (no 3G) -> stack rom 2.2i.1 still i am unable to connect to 3G
Pls help any body who are having solution..
Thankyou both flashing my S to a new rom asap
Hello
I have been using NEW CM10 UNOFFICIAL - By Aben now for a whole day and it is running fast and good, no reboots or fc.
My problem is that i can not get Mobile data to work on EDGE/GPRS, APN saves correctly and using same info as another A99 running GB (and connects) This rom is the first i have problem to get the data to run on.
Does anyone here have EDGE working on CM10
/ Found out that i had a typo in the settings =)
Now everything i need works
kunghenke said:
Hello
I have been using NEW CM10 UNOFFICIAL - By Aben now for a whole day and it is running fast and good, no reboots or fc.
My problem is that i can not get Mobile data to work on EDGE/GPRS, APN saves correctly and using same info as another A99 running GB (and connects) This rom is the first i have problem to get the data to run on.
Does anyone here have EDGE working on CM10
/ Found out that i had a typo in the settings =)
Now everything i need works
Click to expand...
Click to collapse
Hi kunghenke,
this is also my first rom ( technically second for AndroId rc3 for Kernel)
My data with BSNL was working fine (manual inout , saves after)( bsnlnet Accesspoint work very quick, as compared to GB)
i also updated to FIX 1, and patch also.then i didnt check for NET, i m on Vodafone now, without internet.
FIX 1 is very drastic improvement over previous 1.
Strange Problem today : Carrier Signal bars are missing, only that blank triangle...
Rest call ,incoming/outgoing are working well.........
Hi, I am using a CM 10.2 based rom and I am having several problems. My wifi doesn't work, even after a clean flash. Is there a fix for that, what should I do ?
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ?♥Note2♥?
mannyvinny said:
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ?♥Note2♥?
Click to expand...
Click to collapse
Hello. I flashed the stock jb xxlsz and the issue still continues can this be a hardware issue?
please help - Galaxy Note N7000 almost dead
mannyvinny said:
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ��♥Note2♥��
Click to expand...
Click to collapse
Hello,
I'm a newbie on rom flashing etc...
and recently I tried to update my Galaxy Note N7000 using this ROM : cm-10.2-20131108-NIGHTLY-n7000
and the wifi started to get crazy.
I experienced connexion issue.
WIFI was disconnected sudently, then I tried to revert to Stable version of Cyanogen mod 10.1
but wifi was off.
I tried to flash using different stock rom :
N7000XXLT9_N7000XXLT3_N7000OXXLT3
N7000XXLTA_N7000XXLT4_N7000VD2LT4
N7000XXLSZ_N7000XEFLS4_XEF
N7000XXLC1_N7000OXALC1_OXA
N7000XXLRI_N7000XEFLP2_XEF
and sometimes I don't knwo why or how the wifi cams back (not always even installing the same stock rom), but with connexion issues.
using this sequence I can get wifi connexion sometimes...
install :
1 - N7000XXLSZ_N7000XEFLS4_XEF
2 - philz kernel LSZ
3 - N7000XXLTA_N7000XXLT4_N7000VD2LT4
4 - Philz Kernel LTA
5 - XEU-N7000XXLT9-20130611091825
5 - Philz Kernel LT9
6 - Rom Radio XXLSC
7 - Kernel : speedmod-kernel-n7000-jb-k5-5-CWM
sometimes the wifi is not recognized, and the mac address is empty.
I'm bit lost, and I would like to know how to revert to a stable situation.
maybe this is due to the kernel.
I'm using Philz kernels aligned with the rom.
Hello,
back after many hours spent yesterday evening playing with different ROMs, Kernels.
in fact I'm currently using my phone as a tablet, without SIM card in it.
and it seems mandatory at least once to put a valid sim card in it.
I tried to put a valid SIM card with 3G data connexion,
no issue with the wifi during 3hours.
shutdown thephone
then remove the SIM and power on the Phone
miracle the phone connect on the wifi without issue!
so it is good to know that SAMSUNG Galaxy note requires at least once to connect on mobile data network.