First startup of Nexus 7- skipping wifi selection screen - Nexus 7 General

As title says, For first startup, can I skip selecting wifi connection for now and go forward? Wifi is disabled in office and I cant wait to check out the device until I reach home

sahshah said:
As title says, For first startup, can I skip selecting wifi connection for now and go forward? Wifi is disabled in office and I cant wait to check out the device until I reach home
Click to expand...
Click to collapse
After I rooted my N7, I didn't have wifi available at the time. After struggling trying to bypass the wifi connection screens, I just let it sit for a few minutes. When I looked back at the tablet, it either had moved on, or gave me the choice to bypass the wifi setup for now. Either way, it worked.
I had no problem setting up wifi later on when it became available again.

Tap all the corners in a clockwise motion, starting with the top-left. Give it a good solid tap or else you'll be going 'round in circles a few minutes.
One good rotation should dump you at the homescreen. I HIGHLY recommend not getting fancy with it and setting it up properly when you get a connection. If you don't connect it to your Google Account at startup, some things get funky later on. Play around then factory reset it when you get to a good wifi spot.
This is also a great time to just go ass wild with games/apps/widgets/etc just to try them out. Then factory reset and install the ones you want (no residue). I always do that with new devices (even the iPads).

Sorry mate, that stroking four corners idea didn't work. I just tricked the startup logic using a wifi router (without any internet connection), connecting to the network and just skipping the google login. Later used Bluetooth DUN to login into the google account.

vasishta.sushant said:
Sorry mate, that stroking four corners idea didn't work. I just tricked the startup logic using a wifi router (without any internet connection), connecting to the network and just skipping the google login. Later used Bluetooth DUN to login into the google account.
Click to expand...
Click to collapse
This worked for me as well - thanks for the suggestion.

Related

[Q] new to the forum new to droid, new captivate

Hi everybody, new to the forums and new to droid - I recently upgraded from the Propel to the Captivate and so far I am loving it. With all the reviews and forums I read before deciding to buy most of my answers have been answered, but not all.
My phone was loaded with 2.2 and when I registered it with Samsung it showed a build date of feb/11 so I'm hoping that my phone has alot of the big fixes already loaded. I have noticed that the gps code listed on this thread
http://forum.xda-developers.com/showthread.php?t=732030
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Other question, I spend alot of time off the cell network and I need a gps that works - which app would be good to use? Searching the app store there is quite a few ranging in price, most seem to have mixed reviews. Google does nothing for me since it needs the network to pull up the maps. Basically when I load up the gps it shows me in a sea of nothingness and trying to scroll the map gives me an error 'need network connection' type of message.
Also, I've noticed what looks like 2 small led's one the face of my phone, just to the left of the speaker and the ugly logo. Are these notification leds or something else?
I don't plan on rooting or flashing my phone for a while... yes yes I know, stock sucks, but like I said I was using the Samsung Propel a couple days ago and now the Captivate - I've got alot to learn and alot to get used to before I switch things around. Yes, one day I do want to switch off of stock software just not right now, thanks for the suggestion though. lol
Model SGHI897
Firmware 2.2
Baseband I897UCKB1
Kernel 2.6.32.9
froyo.uckb1
thanks in advance for the help and advice, now it's time to finish reading through the app thread and hit up the store...
psynonamous said:
Hi everybody, new to the forums and new to droid - I recently upgraded from the Propel to the Captivate and so far I am loving it. With all the reviews and forums I read before deciding to buy most of my answers have been answered, but not all.
My phone was loaded with 2.2 and when I registered it with Samsung it showed a build date of feb/11 so I'm hoping that my phone has alot of the big fixes already loaded. I have noticed that the gps code listed on this thread
http://forum.xda-developers.com/showthread.php?t=732030
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Other question, I spend alot of time off the cell network and I need a gps that works - which app would be good to use? Searching the app store there is quite a few ranging in price, most seem to have mixed reviews. Google does nothing for me since it needs the network to pull up the maps. Basically when I load up the gps it shows me in a sea of nothingness and trying to scroll the map gives me an error 'need network connection' type of message.
Also, I've noticed what looks like 2 small led's one the face of my phone, just to the left of the speaker and the ugly logo. Are these notification leds or something else?
I don't plan on rooting or flashing my phone for a while... yes yes I know, stock sucks, but like I said I was using the Samsung Propel a couple days ago and now the Captivate - I've got alot to learn and alot to get used to before I switch things around. Yes, one day I do want to switch off of stock software just not right now, thanks for the suggestion though. lol
Model SGHI897
Firmware 2.2
Baseband I897UCKB1
Kernel 2.6.32.9
froyo.uckb1
thanks in advance for the help and advice, now it's time to finish reading through the app thread and hit up the store...
Click to expand...
Click to collapse
As for needing a GPS on without using Data there are a few but to be honest if you need it for reliable GPS, then you got the wrong device. The captivate is known for having terrible GPS and it is unrelible at best. Good enough to help you learn a new town but not good enough to get you where you need to go on time everytime. The led are the light sensors. No led Notifications with the captivte at all unless you rom a custom rom and get BLN from the app store that will light up your 4 bottom keys when you have a message.
I do have a stand alone gps, I was just hoping I'd be able to free up some pocket space with the phone - so far, it just shows a blank screen with a blue indicator and says it's accurate 'within 10 meters'. I was hoping I could find a app that provided maps and maybe help tune it a bit. Next time I'm on the network I'll play around with it and see what kind of readings it gives - even if the gps is low end, I'm still liking this phone so far... a whole lot better than the propel.
Thanks for the update, zelendel
google "android app navigation preloaded maps"
psynonamous said:
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Click to expand...
Click to collapse
Try using *#*#3214789650#*#* for the dialer code.
psynonamous said:
Also, I've noticed what looks like 2 small led's one the face of my phone, just to the left of the speaker and the ugly logo. Are these notification leds or something else?
Click to expand...
Click to collapse
One is a proximity sensor and one is a light sensor.
Thanks for the info, I got a couple gps test apps I'm going to mess around with in a while but, I found a new problem that is driving me crazy...
I bought a usb wifi adapter - Asus n13 (b/g/n), in the hopes of using my internet for data and my phone will not connect to wifi. Even driving around town to places that offer free open wifi, my phone will not connect. It finds the wifi hotspots, pulls up the ssid, says connecting, then gets to 'assigning ip' and freezes. On my pc wifi setup, it shows a new connection and 2 seconds later disconnect.
In the phone wifi settings, it keeps showing wifi -connecting....disconnected, back to scanning, connecting in an endless loop - but it never connects. It has the ssid remembered but I cannot delete it or reset it. WPS failed to connect from either end.
Sleep Policy is off
Use Static IP is off
This is a big issue for me since I'm on the cheap att data plan.. I've tried various settings on the pc side of things, all with the same results, I've browsed the internet and done a bit of troubleshooting (ie, different usb ports, different drivers, turning on/off services, etc etc) - I think the problem is on the phone since it does not access any wifi... maybe I missed a setting somewhere?
For now I'm going to dig through the user manual again...
OK, playing around with some of windows wireless settings I've hit a new roadblock... my phone says connecting... Obtaining IP address... Disconnecting... Scanning...
That is one small step closer I think, because it wasnt trying to get an ip address earlier, it was just connecting/disconnecting.
finally! I figured it out!!!
Just for future note.... You have to go into your windows network settings, highlight your broadband AND wifi together - select bridge... restart your pc wifi software and then connect your phone, it should start right up!
psynonamous said:
Does not work on my phone, I enter *#*#1472365#*# and the last * just clears the code out of my dialer... no sub-menu, no options, nothing. Any ideas how to do gps testing?
Click to expand...
Click to collapse
You say you do not want to root the phone. But try Launcher Pro anyways to access the LbsTestMode.
1. Sign up/in to the market.
2. Download and install Launcher Pro (it says Pro but there is a FREE version, so dont worry).
3. After install, go to home screen. Long press and choose "Shortcuts"
4. In menu, choose "Activities" (yellow icon).
5. Scroll down and expand the menu "LbsTestMode". Under this is a submenu. Choose the first "LbsTestMode" under this. Yes the main menu and submenu have same name.
6. Choose Ok or whatever, and the icon will be on your Home screen.
7. If you get this far, then you are good.
Open LbstestMode:
1. At the moment you probably should just leave Application Settings to default.
2. Under "Supl/CP settings". And change as follows:
Server: supl.google.com (no "www.")
Server Port: 7276
Secure Socket: OFF
AGPS Mode : SUPL
3. Return to previous menu.
4. DELETE GPS DATA just to clear all previous data.
5. Run "Get Position Test" on top of menu.....
Good Luck !!
psynonamous said:
Other question, I spend alot of time off the cell network and I need a gps that works - which app would be good to use? Searching the app store there is quite a few ranging in price, most seem to have mixed reviews. Google does nothing for me since it needs the network to pull up the maps. Basically when I load up the gps it shows me in a sea of nothingness and trying to scroll the map gives me an error 'need network connection' type of message.
Click to expand...
Click to collapse
Yeah, Google Maps requires a network connection.....BUT when you go into Navigation mode - via the Directions menu and turning on navigation, you get navigation. YOU NEED TO DOWNLOAD VOICE SYNTHESIS from the market to get voice guidance. This a good first try, IF YOUR GPS WORKS !!
Or try NAVIGON for Android ....you can buy it but also check here www.mobilism.org (ahem..ahem). I use daily, and I think it is the best routing....
EDIT: Well...about google maps, I think you need a data connection jsut to open the damn software, so you will need Navigon, Igo primo or similar...I AM ASSUMING YOU WANT ROUTING DIRECTIONS and not hiking type positioning. Then take a look at this http://www.backcountrynavigator.com/content/android-gps-software AND here http://www.backcountrynavigator.com/
Thanks again for the updates, but it seems like either Samsung or ATT has locked out the Lbs Test mode feature, both of the codes have the same result - after entering the last character it clears it out. I did get LauncherPro and am really digging it so far, but even the lbs tests dont do anything, it goes to a blank screen and just sits there... I have the status bar at the top and a totally blank screen. I even set my phone down on a box out in the yard for 30+ minutes and nothing ever came up - using the google and stock settings for the test. I'm guessing if/when I root my phone the tests will work
I started using GPS Test from Chartcross Limited and GPS Status from EclipSim - both show that my gps is accurate between 16.4 and 32.8 feet - depending on which the way the wind is blowing. I've been browsing some of the other gps/map apps but for now I'll just carry around my standard gps when I need it.
Even with the gps issues, I'm really liking this phone alot. I havent really ran into any other problems yet

[Q] Forgotten wireless network

Ok I'm a moron.
I accidentaly told my nook to forget a wireless network and now I can't get it back. I've looked all through settings and don't see anything that would allow me to reset this. I've tried scanning as well.
I'm running gingerbread the CM7 mod.
Sorry I tried searching but when you look for something like 'resetting' you get a lot of threads about resetting back to stock which is not what I want to do.
Is there a way to I don't know purge the wireless settings so it will search for networks that it has been told to forget?
twopossums said:
Ok I'm a moron.
I accidentaly told my nook to forget a wireless network and now I can't get it back. I've looked all through settings and don't see anything that would allow me to reset this. I've tried scanning as well.
I'm running gingerbread the CM7 mod.
Sorry I tried searching but when you look for something like 'resetting' you get a lot of threads about resetting back to stock which is not what I want to do.
Is there a way to I don't know purge the wireless settings so it will search for networks that it has been told to forget?
Click to expand...
Click to collapse
When you tell it to forget it doesn't blacklist a Network, it just Removes it from your preferred Networks and forgets the Password. It should reapear on the list of Available networks if in Range.
If it won't show up even when standing next to it do this.
-Download Wifi Analyzer from Market.
-Open App Punch Menu and Tap View. Select AP List.
-Look for the Network and Tap it. It might prompt for a Plugin from Market. Just Download and continue.
-When Window pops up put in Password and hit Connect. TaDa it should now work.
____________________________________________________
Sent from NookColor CM7 using Tapatalk
Well I don't know if its a glitch in system or the mod itself but when I got home my nook wouldn't connect to my home network either. It kept saying I was out of range even when I was sitting in the room with the router.
So I ended up just reinstalling gingerbread. My instal was only a week old do no real biggie for me just annoying.
Ill just make sure not to ever forget a network again as it apparently Jones up my system
Thank you for the advice though.
twopossums said:
Well I don't know if its a glitch in system or the mod itself but when I got home my nook wouldn't connect to my home network either. It kept saying I was out of range even when I was sitting in the room with the router.
So I ended up just reinstalling gingerbread. My instal was only a week old do no real biggie for me just annoying.
Ill just make sure not to ever forget a network again as it apparently Jones up my system
Thank you for the advice though.
Click to expand...
Click to collapse
Hey I have the same problem going on right now. My system wont connect to anything. The wifi status just keeps saying connecting and then will eventually turn off. I think I am going to use this as an excuse to try out Deeper-Blue's Honeycomb preview.

Note WiFi Problem

Hello all, a quick question here.
I've done a search on this issue and didn't seem to find any match.
I run a stock off the shelf Note, no modifications. It connects, without any problem, with my home wifi. On many occasions now, when I'm in public place with open WiFi, I run quick tests to see if it connects. It does and says CONNECTED with a good speed. I check if it's really connected by refreshing my weather report and I try the ESPN Score app. EVERY TIME it says that it can't connect to the respective servers. So I'm actually NOT CONNECTED at all? I'll disconnect and reconnect several times and it gives me good connection speeds, but I'm still off air.
When I get home, I hit the WiFi, and in a couple seconds I'm connected with working apps.
I've tried everything and just have no idea what's blocking connections away from my house?
I run both Lookout and AVG on my phone and haven't found any settings from them that might be the reason for the blocking?
Any ideas?
Thanks.
In my experience most public WiFi spots require you to log in through the browser to set up the connection. It is there, but until you log in, nothing but their page is accessible.
All they want is your email and to show some ads, so it normally fine to do.
Usually when you open a browser or website, it should load up a "LOGIN" screen for you to enter a username or password.
It also depends where you are, most libraries and hospitals will give you access to free Wi-Fi without a login. In coffee shops or an office building, you will need a login.
jeromepearce said:
In my experience most public WiFi spots require you to log in through the browser to set up the connection. It is there, but until you log in, nothing but their page is accessible.
All they want is your email and to show some ads, so it normally fine to do.
Click to expand...
Click to collapse
rickstermar555 said:
Usually when you open a browser or website, it should load up a "LOGIN" screen for you to enter a username or password.
It also depends where you are, most libraries and hospitals will give you access to free Wi-Fi without a login. In coffee shops or an office building, you will need a login.
Click to expand...
Click to collapse
Thanks for your input!
I'm embarrassed to say that I actually never tried opening the browser, I just kept trying to make the apps. and widgets connect.
I will definitely give that a try next time I'm out. I really have no desire to use the public open WiFi's because of the threat of being hijacked or spied on by some random coffee drinking hacker, I just wanted to make sure all my phone functions work properly.
Thanks again!
many open spots lock down different ports to stop people using loads of bandwidth
if it gets connected with 1 wifi then it should with others, no problem with the system.
All public wifi spots I use will connect but do nothing until I load the browser and agree to their terms of service etc.

Ok, how do I change wifi settings?

Let's say I pick up the ChromeCast put it into my pocket and take it to a friend's how to show it off. It still has my SSID programmed into it.
How do I reset it, while at his house, so that I can put her SSID into it?
I wonder if the hardware button resets it. I didnt see anything in the manual though.
I ran into this problem yesterday. I think you have to hit that little reset button because I couldn't change it at all.
If you take the Chromecast to a new location, it will display a screen stating that it cannot find the wifi it was originally configured to. At that time, it will broadcast itself as a wifi access point, and you can just run through setup again. ( Try google.com/chromecast/setup )
Alternatively, if you have an android device, you can download the Chromecast app to do some minor configuration. I found this was the easiest method to access the device on the same wifi network, and get details like ip address and so forth. It also looks like it's Google's method to install new apps to the device when they become available.
For a PC:
google.com/chromecast/setup
For Android:
Reset button.
That's all that works for me.

[Q] Connected to WiFi network, but no internet connection [WebOS]

Last night, I found my TouchPad sitting under a pile of papers in my office after a few months of wondering where it was and charged it on the dock. Before this long gap of not using it, it had been working perfectly fine - internet browsing, apps, etc... and the internet definitely worked.
After turning it on, it will connect to my WiFi network without a problem, but when I go to open up a web browser page, it says: "Error: No Internet connection." I also can't get it to load stories in the USA Today app and it won't check email in the email app.
I tried enabling/disabling Airplane Mode and then reset the WiFi settings (gave it a new IP address under the WiFi Preferences menu, like this HP forum post says to do), but it still doesn't want to let me go to websites or anything.
Any ideas on how to fix this?
karmapuhlease said:
Last night, I found my TouchPad sitting under a pile of papers in my office after a few months of wondering where it was and charged it on the dock. Before this long gap of not using it, it had been working perfectly fine - internet browsing, apps, etc... and the internet definitely worked.
After turning it on, it will connect to my WiFi network without a problem, but when I go to open up a web browser page, it says: "Error: No Internet connection." I also can't get it to load stories in the USA Today app and it won't check email in the email app.
I tried enabling/disabling Airplane Mode and then reset the WiFi settings (gave it a new IP address under the WiFi Preferences menu, like this HP forum post says to do), but it still doesn't want to let me go to websites or anything.
Any ideas on how to fix this?
Click to expand...
Click to collapse
As you say that you haven't used it for a while I'm wondering if you updated the root certificate.
If you didn't here are instructions on how to :
http://forum.xda-developers.com/showthread.php?t=2329264
Hope that this helps.
sstar said:
As you say that you haven't used it for a while I'm wondering if you updated the root certificate.
If you didn't here are instructions on how to :
http://forum.xda-developers.com/showthread.php?t=2329264
Hope that this helps.
Click to expand...
Click to collapse
It won't even let me go into the App Catalog to download the update, actually. When I try to, it says: "You must connect to a network to use this application." After I click "Retry," there is a brief moment where it flashes a screen asking me what country I'm in before it goes right back to the screen telling me to connect to a network.
I don't think this is an issue with my router, since all of my family's phones (a Galaxy Nexus, a Galaxy S3, and two iPhones), two laptops, and a Kindle are all using the network with no problems at all. It seems to me like it must be an internal problem with the way my Touchpad is interacting with the network.
Thanks for the suggestion though! That could be another issue I'll have to fix too (since I don't remember downloading an update to fix that problem, which I hadn't heard about before, though I think I've probably used my Touchpad at some point since July 2013).

Categories

Resources