i first diiscovered this rom on this thread
http://www.droidforums.net/forum/motorola-droid-bionic/218745-jelly-bean-rom-starting-roll-out.html
Here is the download link for the rom
and here is the link for the gapps
I did not build this but i have tested it. the data does work sometimes if you play with the settings but no camera. its still a very early release created by dhacker29 and hashcode and i just wanted to share it here too.
Hmmm I think I'll stick with CM for now. Too many bugs not to notice. Maybe if the Bionic wasn't my main device.....
Looks cool, defignitly not a daily driver though.
Devices:
Samsung Galaxy S3
Asus Transformer
Motorola DroidX
Motorola Droid Bionic
Motorola Droid 1
Motorola Cliq
Please Visit www.teendroid.com
It will only run with an ICS leak in the unsafe partition?
I've been using it for about 24 hours now. Very stable, fast, smooth, and promising. Only issues I've had are the known issues of camera and data.
Sent from my XT875 using xda premium
ronaldheld said:
It will only run with an ICS leak in the unsafe partition?
Click to expand...
Click to collapse
Actually right now the CM10 is preferred to use safestrap instead of bootstrap since it's in alpha stage. I tried it with safestrap 2.0 while running .232 on safeside. Very smooth and responsive with WiFi only for data.
You might want to brush up on your bootstrap skills since the ICS leak roms will only be able to load up with it to completely run. The ICS leak roms will require a much larger partition to run on and safestrap doesn't provide it.
Hi, new to the bionic but have been flashing my x and x2 for a while. I'm on the .232 leak with safestrap 2.0 installed. I got as far as >safestrap menu>enable safe system but then a warning screen appeared saying something along the lines of "are you sure, this cannot be undone", which scared me. Obviously i would like to return to my unsafe side.
also, i have read this link http://www.droidforu...ions.html������ which says i must go to mounts and storage and format /system. however i havent seen that step anywhere else i've looked. I assumed once i got to the safe system i should just flash the cm10 zip and gapps then wipe the big three. this is preventing me from flashing cm9 as well.
in regards to the rom itself, any update on data, im in a pretty well covered 4g area. also, i use my phone as a hotspot around my apartment and was wondering if anyone could confirm the cm10 hotspot works.
thanks in advance if you can answer any or all of these questions
ronaldheld said:
It will only run with an ICS leak in the unsafe partition?
Click to expand...
Click to collapse
Yes. Be on an ICS leak, and if you use Safestrap you install it on the safe side.
nobe1976 said:
Actually right now the CM10 is preferred to use safestrap instead of bootstrap since it's in alpha stage. I tried it with safestrap 2.0 while running .232 on safeside. Very smooth and responsive with WiFi only for data.
You might want to brush up on your bootstrap skills since the ICS leak roms will only be able to load up with it to completely run. The ICS leak roms will require a much larger partition to run on and safestrap doesn't provide it.
Click to expand...
Click to collapse
Vague reply is vague and potentially FUD. If you could explain your comment about the safestrap partition size, it would likely be appreciated.
The way I understand it is that Bootstrap is required for custom ROMs based on blurry ICS. If you're flashing an AOSP/CM based custom ROM, then Safestrap is sufficient. The reason being that Safestrap stores /system inside the /preinstall partition since it's mounted on boot and the internal or external sdcards, I'm thinking, are not.
/preinstall is not large enough after the ICS leak has been flashed to store a full blur based custom ROM and the original /system
Why moto decided to mess with the partition tables is beyond me. I can only guess that they needed more room on /system because ICS is bulkier than Gingerbread and they robbed Peter to pay Paul by taking the left over space from /preinstall. Novel solution, but it causes problems with safestrap.
This remap of the partition tables would also explain why an ICS version of Safestrap and Bootstrap had to be made.
safestrapped over .232 no data and i have the screen rotation bug. still awesome though
anyone have a working link to this and maybe screen shots?
[Q] Only JB ROM ?
Hello...is this the only JB ROM available for Bionic? As always, thank you to the Devs!
Seems to be. everyone is waiting for the first FXZ Leak of JB to really get it reliable. ( dont hold your breath from what i hear).. as i understand it.
If you check out rombot.org formally droidhive sparkyman has released tormented. It's based on cm10 he is updating it frequently and he is very supportive in the thred . A lot of people are getting solid data 3g more than 4g. Its very fast and quite stable. Here's a link.
http://rombot.org/forums/index.php?/topic/1787-rom-tormented-kang/
Sent from my DROID BIONIC using xda app-developers app
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Hashcode said:
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Click to expand...
Click to collapse
Can't wait, been watching the D3 forum and very exited to see kexec coming our way. Thanks for all the hard work and time you guys put in to this.
Sent from my DROID BIONIC using xda app-developers app
Hashcode said:
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Click to expand...
Click to collapse
Thanks for your work. My BIONIC is waiting patiently (while I wait impatiently )
Is here on XDA where you will post it? ah well, I followed you on twitter anyway.
CYOGEN
cmoney12051 said:
i first diiscovered this rom on this thread
http://www.droidforums.net/forum/motorola-droid-bionic/218745-jelly-bean-rom-starting-roll-out.html
Here is the download link for the rom
and here is the link for the gapps
I did not build this but i have tested it. the data does work sometimes if you play with the settings but no camera. its still a very early release created by dhacker29 and hashcode and i just wanted to share it here too.
Click to expand...
Click to collapse
Does anyone have the files for the "CYOGEN 10" on dropbox or 4share?
I have always enjoyed their work, currently I am running liquid ICS v1.5 and I am very happy with it but I woulod love to give the "CYOGEN" a test drive :laugh::laugh::laugh:
Jickracer007 said:
Does anyone have the files for the "CYOGEN 10" on dropbox or 4share?
I have always enjoyed their work, currently I am running liquid ICS v1.5 and I am very happy with it but I woulod love to give the "CYOGEN" a test drive :laugh::laugh::laugh:
Click to expand...
Click to collapse
Here's a link to get it.http://romdroidhacks.com/forums/ind...tstrapall-download-links-in-op-updated-daily/
Sent from my DROID BIONIC using xda app-developers app
check out these new jelly bean roms on rombitch. its pretty good so far. no camera or hdmi yet obviously. but im getting data.
KEXEC
http://rombitch.com/donttweetmeaboutthisstuff/KEXEC-aokp_targa_jb-build-1-20120914.zip
STOCK AOKP
http://rombitch.com/donttweetmeaboutthisstuff/STOCK-aokp_targa_jb-build-1-20120914.zip
Aokp link is dead dude.
Sent from my XT875 using xda premium
Related
Hey guys!
I have you, an official version of Motoblur w/Android 4.0.4 (my creation!)
Just to play it safe, I really want to avoid everything I am saying below:
1. DO NOT argue or discuss the liability or credibility of this rom.
The DROID 3's current version is [Advanced Beta #1 -- 6.9.888] and the DROID BIONIC is on [Beta #2 -- 2.4.742].
XT860 Users: http://bit.ly/IB1Xeb
XT862 Users: http://bit.ly/HPcamq
NOTE: If coming from ANY PREVIOUS RELEASE, A FULL WIPE IS REQUIRED!
Format your system, format your data, wipe cache and wipe dalvik-cache!
KEEP IN MIND: The first boot will take about 2 or 3 minutes. It will speed up more. Also note that the boot animation is considerably slow but it will progressively speed up while it boots. You will know it boots up when your capacitive lights come on.
What doesn't work:
Video Recording on the camera
Panorama Mode on the camera
HW Codecs aren't working
__________________________________________________ ________________
Changelog for Advanced Beta #1:
1. Updated icon set for most apps from DROID RAZR ICS Leak
2. Some other things added from Razr ICS Leak (won't be noticed probably)
3. Physical Keyboard fix
4. GOOGLE APPS ARE INCLUDED: DO NOT FLASH GOOGLE APPS
5. XT860 Data fix
6. Updated AOKP Base
7. Rotation issues should be fixed
8. Other small bug fixes
9. Added Motoblur ICS Launcher (from DROID RAZR ICS Leak)
10. Added Google Play Store version 3.5.15 (will update to .16)
11. Added Volume+ v1.9 beta
12. Added Root Explorer
13. More Launcher choices (Apex, 2 RAZR ICS Launchers, Launcher2)
__________________________________________________ _________
__________________________________________________ ________________
The following credit goes out to:
Hashcode - for letting me use his rom as a base for this rom
rapmv78 (XDA) - For creating patches for the camera that are included in roms for the DROID 3, DROID BIONIC, DROID RAZR, DROID RAZR MAXX, and the DROID 4!
Motorola - For making the DROID 3
Google - For making the Android 4.0 OS
------------------–-------------------
Awesome, I will try it out, what works and what doesn't? Ah screw it ill just jump in
Sent from my DROID3 using XDA App
droidian1441 said:
Hello,
Some of you may now know me or am familiar with my existence with XDA, as I posted the links to both 5.7.902 and 5.7.905 OTA updates.
Well, now that you have a little "refresh" (I can't think of the better word), I'd like to ask a favor from you.
Over the past few months, I have been hard at work some to little help from developers.
If you have seen this post, http://bit.ly/won9Fr, you can look at the pictures and see what I am trying to do. I had a different plan, but it wouldn't work out.
I have been working really hard to get the rom to work. I've been dealing with booting problems, setup problems, etc... and have finally gotten to a home screen with FC's that won't bother us too much.
So now I get to my question. I believe I already have one person in a test group, and I would like to know if anybody would be helpful enough to try out my rom for about a day or 2.
You have to look at the pictures above to see what im trying to do in making a slightly different rom than Hashcode's stock ICS.
I would really appreciate it, and you will get a PM with a link if you choose to help out.
Thanks!
Click to expand...
Click to collapse
Sent you a pm
Sent from my DROID3 using XDA App
so is this a port of the razr rom? hoping the camera works on this!
ssinisterss said:
so is this a port of the razr rom? hoping the camera works on this!
Click to expand...
Click to collapse
In a way yes, in a way no.
I'm not actually using the files from that leak. They wouldn't be compatible correctly.
how about the kernel or camera files? since the razr and d3 camera are the same
ssinisterss said:
how about the kernel or camera files? since the razr and d3 camera are the same
Click to expand...
Click to collapse
The kernel will be the same as the one thats on the stock/or other rom you are coming from.
The camera doesn't work at the moment, but im taking a look at it now.
I can test it on my xt860
Sent from my XT860 using xda premium
Endoroid said:
I can test it on my xt860
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Alright, well you will be in the XT860 area of the testing.
droidian1441 said:
Alright, well you will be in the XT860 area of the testing.
Click to expand...
Click to collapse
Awesome. I've been dying for something new to flash and play with
Sent from my XT860 using xda premium
IDK if you need another xt860 tester but if you i'd be happy to give this a test run.
Willis111 said:
IDK if you need another xt860 tester but if you i'd be happy to give this a test run.
Click to expand...
Click to collapse
Your in as well.
Sent from my DROID3 using XDA App
droidian1441 said:
You have to look at the pictures above to see what im trying to do in making a slightly different rom than Hashcode's stock ICS.
Click to expand...
Click to collapse
I think it should be clear that Hashcode is not working on a stock ICS, he is porting CyanogenMod 9 to the Droid 3 and several others.
Not stock. Far from it.
gVibeR said:
I think it should be clear that Hashcode is not working on a stock ICS, he is porting CyanogenMod 9 to the Droid 3 and several others.
Not stock. Far from it.
Click to expand...
Click to collapse
I know, I am just used to saying it like that haha.
Sent from my DROID3 using XDA App
I would love to test glad theres still active development on this device sinse it does run ics nicely
Sent from my DROID3 using xda premium
droidian1441 said:
Hello,
Some of you may now know me or am familiar with my existence with XDA, as I posted the links to both 5.7.902 and 5.7.905 OTA updates.
Well, now that you have a little "refresh" (I can't think of the better word), I'd like to ask a favor from you.
Over the past few months, I have been hard at work some to little help from developers.
If you have seen this post, http://bit.ly/won9Fr, you can look at the pictures and see what I am trying to do. I had a different plan, but it wouldn't work out.
I have been working really hard to get the rom to work. I've been dealing with booting problems, setup problems, etc... and have finally gotten to a home screen with FC's that won't bother us too much.
So now I get to my question. I believe I already have one person in a test group, and I would like to know if anybody would be helpful enough to try out my rom for about a day or 2.
You have to look at the pictures above to see what im trying to do in making a slightly different rom than Hashcode's stock ICS.
I would really appreciate it, and you will get a PM with a link if you choose to help out.
Thanks!
Click to expand...
Click to collapse
PM Sent
/10char
i don't if the pm already run, but i like to help you in the test of the ics on droid 3....
Best Regard
Well I've gotten a good group of awaiting members on here now and I finalized the first preview build last night. Ill be sending a PM to everybody who joined in, on posting here or PM'ing me.
It will be out later today, so some can still get in for the time being!
Sent from my DROID3 using XDA App
And now that I've got a mixed up group, can everybody in the testing tell me whether they are using an Xt862 or Xt860?
Sent from my DROID3 using XDA App
i would love to help if you doint mind
XT862
Just seen this released. Here is a link to the thread I found.
http://rootzwiki.com/index.php?/topic/19370-Team-gummy-ICS4-boinic
Sent from my DROID BIONIC using XDA App
good find but apparently eveyone knows about it or are more into miui???
Just flashed this baby very quick IMO thinking of trying this thing out as a base learned a lot from @insanemod to port a miui rom and seeing what the difference performance wise would be
Sent from my XT875 using XDA App
Gummy question
First of all pardon my ignorance. I have flashed several ROMS with sucess (and instructions!), however I have not seen anything on Gummy as far as instructions. Is Gummy a stand alone ROM or does it get installed on top of an exsisting ROM? If the later is true which ROM is the best to install over? I have a Bionic with a stock 904 and am rooted. Thank you!
Denny
I'm not sure what's going on with TeamGummy, but I'm having a LOT better luck with HiveDev's unofficial CM9 port. I installed the 5/31 nightly and I'm having amazing luck with it. The camera is even extremely usable!
http://rombot.droidhive.com/ROMs/targa/cm9/
Is this a stand alone? Thanks!
projektorboy said:
I'm not sure what's going on with TeamGummy, but I'm having a LOT better luck with HiveDev's unofficial CM9 port. I installed the 5/31 nightly and I'm having amazing luck with it. The camera is even extremely usable!
http://rombot.droidhive.com/ROMs/targa/cm9/
Click to expand...
Click to collapse
Ok, so I loaded the ROM. There is nothing Google, how do you load any apps? I found the Google Play apk and Titanium Backup apk, loaded both and neither work. Thanks!
Denny
You need to flash GAPPS after you flash the ROM. Here is a link to what I think is the latest GAPPS
http://goo.im/gapps/gapps-ics-20120422-signed.zip
It worked! Thanks!
Well after a couple of days trying this ROM I have to say I'm not happy with the performance. I keep having to reboot, I keep losing my radio and phone service. I have made calls where I can hear nothing but the other person can hear me. Maybe I'll try again when they get the bugs worked out.
So with ICS on the way to OTA within the next few months, there's sure to be some custom ISC roms for the bionic, right?
Since JB is an incremental upgrade from ICS, will developers be able to get JB on the bionic before it's official announcement/release?
Sent from my DROID BIONIC using xda app-developers app
Im going to make a safe bet and say that next month when the source comes out it will hit a lot of devices and maybe even yours... but you might want to stay proactive and work with someone to make sure it happens.
Sent from my i727 DÅÅTH machine
I have next to no programming/modding knowledge though... What ways could I help? I really want to see it on my device.
Sent from my DROID BIONIC using xda app-developers app
asmith1243 said:
I have next to no programming/modding knowledge though... What ways could I help? I really want to see it on my device.
Sent from my DROID BIONIC using xda app-developers app
Click to expand...
Click to collapse
In order for JellyBean to be fully functional on a device, it needs a kernel that supports all the features that are a part of the operating system.
Since Moto's phones have a locked bootloader, it prevents the kernel from being modified by anything except official updates from Motorola.
If we see any JB ROMs on the Bionic, they're going to be incomplete and unstable (like how ICS ROMs were before the ICS leaks) because they won't be able to run with a kernel that supports all its features.
Imagine having a Nissan and wanting to put a Honda engine inside it instead. None of the connectors and parts are going to fit together properly and you're going to have to make a bunch of small hacks/mods to make it work, and you can only hope that it behaves properly once you put it all together. That's pretty much what it's like to force a kernel mismatch on locked bootloader devices.
Jelly Bean source code dropped late yesterday.
nobreak1970 said:
Jelly Bean source code dropped late yesterday.
Click to expand...
Click to collapse
This means almost nothing for the Bionic. The Bionic gets to be saddled with a kernel for ICS 4.0.4 which won't support all the upgrades and tweaks made for JB. If we get a JB ROM it'll extremely difficult for 100% of the features in JB to work.
Hash code has kexec fully working on the Droid 3 running his 3.0 kernel. He has a cm9 rom for it almost ready to be released. On his twitter he said that he plans to port kexec to the other phones he supports which would be this bionic and the Droid 4. Dhacker is also working on jb for the razor which he plans to port to the bionic in the meantime.
Sent from my CM9 Kindle Fire using xda premium
Good news, but we are still playing the waiting game. Kind of BS for a phone that I paid $300 for. Its "My phone", and should have been unlocked a looooong time ago as stated by Verizon and Moto. Q3 2011 if I recall correctly. Oh well, I'll deal with my ICS leak until its official as at least it saves me the frustration of wanting to throw the phone against the wall.
Jb build is out for bionic and kexec is up and running on the bionic.
Sent from my XT875 using Tapatalk 2
Steve125 said:
Jb build is out for bionic and kexec is up and running on the bionic.
Sent from my XT875 using Tapatalk 2
Click to expand...
Click to collapse
how about a source link?
I believe he is referring to CM10. I'm in the process of flashing this. Just waiting for my battery to charge to 100%. I'll let ya know how it goes and post the link.
It works!
zoompastu said:
It works!
Click to expand...
Click to collapse
talk is that it's in ICS. period.
and does EVERYTHING work in cm 10. i wouldn't mind a little jellybean
snowwy66 said:
talk is that it's in ICS. period.
and does EVERYTHING work in cm 10. i wouldn't mind a little jellybean
Click to expand...
Click to collapse
I'm not a developer but, its my under standing that CM10 is Kexec ( http://en.wikipedia.org/wiki/Kexec ) which allows the JB kernal to run on top of the ICS kernal and bypass MOTO's signature checks and locked bootloader. They have just started developing CM10 JB for the Bionic so they are having data issues and the camera doesn't work. Another guy said bluetooth doesn't work. Its not ready to be a daily driver yet.
Now on the plus side it is FAST and SMOOTH!! Google Speak is AWESOME!! Way better then Siri (Siri still can set appointments GS can't). Even though this is in Alpha stage and it came out 2 weeks ago IMHO this is going to be the way togo very soon once they get a few bugs ironed out. It will get there. We still don't technically have ICS for the Bionic and I can almost bet my right arm MOTO will not release an OTA JB.
Once they get everything up and running I would jump on JB for my bionic in a heartbeat...Having ICS is nice (honestly I forget it's not the official build because the phone runs so much better already) but nothing is as smooth as butter.
agreed
reviving this old thread.
any latest news on JB yet? (cm10) or whatever may be floating around out there.
snowwy66 said:
reviving this old thread.
any latest news on JB yet? (cm10) or whatever may be floating around out there.
Click to expand...
Click to collapse
This thread has the most recent updates, I would keep checking up on it.
http://forum.xda-developers.com/showthread.php?t=1862459&page=15
FLASHING ROMS WILL VOID YOUR WARRANTY AND COULD POTENTIALLY DAMAGE YOUR PHONE -- WHILE I MAKE EVERY ATTEMPT NOT TO LET THIS HAPPEN, IT'S STILL A RISK THAT YOU'RE TAKING. IF SOMETHING BAD SHOULD HAPPEN TO YOUR PHONE, PLEASE DON'T BLAME ME -- HENCE THIS WARNING.
-Hashcode {06-21-12}
This isn't so much a ROM announcement as it is a direction to find the unofficial nightly builds of CM9 Kexec for the Droid 4.
Prerequisites:
- Rooted
- Running ICS OTA or .217 leak (they are the same)
- SafeStrap 2.11 Here's how to use Safestrap
Download SafeStrap here
SafeStrap Mirror 1 (v2.11)
Download ROM here
ROM Mirror 1 (8/20 build)
Download ICS GApps Here (04/29 build)
ICS GApps Mirror 1 (04/29 build)
FLASH THE GAPPS.ZIP FILE AFTER YOU FLASH THE ROM .ZIP
Directions:
1. Root your stock system
2. Install SafeStrap 2.10+ (for Kexec support)
3. Backup stock system
4. Toggle to SAFE system (safe to screw things up!)
5. Flash the ROM .zip like any other ROM
6. Flash the GApps .zip
7. Reboot and enjoy!
What works?
4G data and calls
Flash (HW Codecs?)
Wifi
SMS and MMS
Whats broken?
Audio while bluetooth is left on and disconnected.
Built-in wifi tether.
Camera (front and back)
USB Audio (Car Dock audio connection)
Touchscreen is finnicky.
Specs:
Kernel 3.0.31
Latest Gfx drivers from TI
CM9
Android 4.0.4 ICS
Screenshots:
Surely you have seen CM9 before?
Thread on ROMBOT.ORG (hashcode's forum)
I don't have any problems with the touchscreen, but the clock is sometimes right and sometimes wrong. On Twitter Hash says he is already working on a fix for the clock.
Very promising. Seems a bit odd to me that anyone is spending time using 3.0.x for a custom kernel; we already have 3.4 on XDAndroid and those are *winmo6* phones originally...
all the links are dead
Here is Safestrap 2.11 http://db.tt/f1xwjL86
Droid 4 - AOKP K1L0
DevilDaHusky said:
all the links are dead
Click to expand...
Click to collapse
Added links to OP.
cron666 said:
Added links to OP.
Click to expand...
Click to collapse
any way to get a list of changes with the builds/nightlies as they change since the forum is down?
azrael293 said:
any way to get a list of changes with the builds/nightlies as they change since the forum is down?
Click to expand...
Click to collapse
the forum and files are on the same host, thats where the changes and nightlies come from.
unless the host gets fixed, we have no more nightlies and no changelogs.
that is, unless there was another nightly and someone has it, then they can post it here and I'll modify OP,
or they can send me a link:
cron410 at google mail
The maserati builds are not up there yet but, rombitch.com appears to be the successor to rombot
EDIT: First cm9 kexec build is up there now!
Sent from my DROID4 using xda premium
I think that website just became my new favorite site.
In all seriousness, for how locked down the Droid 4 is, I'm very impressed how far development has come along for it. I'm very excited to see what comes down the pipe as far as CM9 and CM10 are concerned.
DarkMidnight said:
I think that website just became my new favorite site.
In all seriousness, for how locked down the Droid 4 is, I'm very impressed how far development has come along for it. I'm very excited to see what comes down the pipe as far as CM9 and CM10 are concerned.
Click to expand...
Click to collapse
Actually, Hashcode just released a new kexec build this morning, although it does not boot, it is CM10! It looks like he will be using his blog site to host future downloads. Here's a link:
http://dl.hash-of-codes.com/ROMs
rumgool said:
Actually, Hashcode just released a new kexec build this morning, although it does not boot, it is CM10! It looks like he will be using his blog site to host future downloads. Here's a link:
http://dl.hash-of-codes.com/ROMs
Click to expand...
Click to collapse
Boots fine for me. Menu, Home, Back, and Search buttons don't work though. It is a kexec build so make sure you are on the latest safestrap recovery version 2.11. Also, you'll need to flash the CM10 gapps: http://goo.im/gapps. Looks like hashcode is making some progress!
kwyrt said:
Boots fine for me. Menu, Home, Back, and Search buttons don't work though. It is a kexec build so make sure you are on the latest safestrap recovery version 2.11. Also, you'll need to flash the CM10 gapps: http://goo.im/gapps. Looks like hashcode is making some progress!
Click to expand...
Click to collapse
Awesome, I honestly did not even try it, I was just reiterating what Hashcode said on twitter. Flashing now!!!
The best thing in our current cm10 - the backlight of hardware keyboard doesn't stay turned on when you don't use it!
olegfusion said:
The best thing in our current cm10 - the backlight of hardware keyboard doesn't stay turned on when you don't use it!
Click to expand...
Click to collapse
Lol
Sent from my XT894 using Tapatalk 2
Hashcode said:
Lol
Sent from my XT894 using Tapatalk 2
Click to expand...
Click to collapse
NO laugh It's truth (for me) :laugh:
Hoping on keep once cm10 on my droid 4 as main rom
In the op it says flash doesn't work. I thought flash wasn't intended to work in jb, that adobe said no more after ics?
Personally I think flash runs great on my d4 but adobe says it doesn't so we have to listen to them since they know what we want.
Sent from my XT894 using Tapatalk 2
Button savior works to make this (kind) useful. Once the soft-buttons and camera are working, will there by anything that DOESN'T work?
This is really, really awesome
podspi said:
Button savior works to make this (kind) useful. Once the soft-buttons and camera are working, will there by anything that DOESN'T work?
This is really, really awesome
Click to expand...
Click to collapse
Just an FYI on the latest release:
Capacitive buttons are working in Hashcode's latest alpha for JB. However, data is pretty iffy. I do not get any type of data connection, so there is not much I can test at this point. Wifi does not work at all as far as I can tell.
I also assume the camera is not working, based on the fact there is no camera app.
As far as the UI is concerned, it seems pretty smooth.
Looks promising!
rumgool said:
Just an FYI on the latest release:
Capacitive buttons are working in Hashcode's latest alpha for JB. However, data is pretty iffy. I do not get any type of data connection, so there is not much I can test at this point. Wifi does not work at all as far as I can tell.
I also assume the camera is not working, based on the fact there is no camera app.
As far as the UI is concerned, it seems pretty smooth.
Looks promising!
Click to expand...
Click to collapse
wifi is because probably forgot module replacing for new kernel. I'll check this out little later
12/7/2012 update
Here is the three JB builds dhacker and hashcode are working on for the Bionic (Targa). CM10.1 is the newest ROM. Safestrap 3.05 has been added but is beta and you MUST follow the instructions or you will brick your device. I am not responsible and neither are the developers if you brick your phone. Rom development has slowed but check back to make sure you have the latest version.
If you would like me to keep this post up to date hit the "Thanks" button please. And thanks to the developers for there time and effort!
AOKP
http://goo.im/devs/Hashcode/targa/aokp
CM10
http://goo.im/devs/Hashcode/targa/cm10
CNA
http://goo.im/devs/Hashcode/targa/cna
Gapps
http://goo.im/gapps/gapps-jb-20120726-signed.zip
Don't BRICK your phone. READ THIS FIRST! / http://blog.hash-of-codes.com/how-to-safestrap
Safestrap 3.05 (Requires ICS)
http://blog.hash-of-codes.com/downloads/safestrap/
Deleted this post... carry on
ROMBot's still isn't working for me (at least nothing is showing up for targa). Cool to see kexec working though.
So I played with the threshold rom a bit tonight and its alright. I'm gonna keep an eye on the updates though cause I swapped back to .232 ICS. JB is in its infancy for the bionic but give it time and it will mature.
jetknife said:
ROMBot's still isn't working for me (at least nothing is showing up for targa). Cool to see kexec working though.
Click to expand...
Click to collapse
There was an update 9/1/12. I didn't see it at Rombot. It is however at HTTP://rombitch.com in the donttweetmeaboutthisstuff folder. And yes targa is the one to download.
zoompastu said:
There was an update 9/1/12. I didn't see it at Rombot. It is however at www.rombitch.com in the donttweetmeaboutthisstuff folder. And yes targa is the one to download.
Click to expand...
Click to collapse
Try http://rombitch.com as opposed to www.rombitch.com
linuxgator said:
Try http://rombitch.com as opposed to www.rombitch.com
Click to expand...
Click to collapse
opps.. Thats what I get for not paying attention to what I'm typing. I hit your thanks button linuxgator. My post has been edited and corrected
zoompastu said:
opps.. Thats what I get for not paying attention to what I'm typing. I hit your thanks button linuxgator. My post has been edited and corrected
Click to expand...
Click to collapse
No prob. Firefox seems to always want to add the www to it for me and it took me a while to figure out where everything went the first couple times that happened.
Which file do we need? There is like 12 files none that have targa in the name.
sent from my DROID BIONIC via XDA App
XperianceIT said:
Which file do we need? There is like 12 files none that have targa in the name.
sent from my DROID BIONIC via XDA App
Click to expand...
Click to collapse
The contents of that directory change frequently, and the targa files seem to have been removed. They are working on getting a non-kexec build of cm10 working and will then get back to the kexec builds once the codebase is stable.
Sent from my DROID BIONIC using Tapatalk 2
Hmm... would it be possible for you to share the one you used? Or is it unstable and better off to wait for better version?
Nevermind... too many links and reading and i lost where i was..... lol. I had to go back and read the op... lol
sent from my DROID BIONIC via XDA App
CM10 Mirror
Here are the flashable ZIPs if you guys want to try out Dhacker's CM10. I flashed them on the safe side of safestrap 2.0 and they worked fine, albeit without camera or data. I happened to still have them on my SDCard so here you go! This is the 07/28 nightly of CM10 with the JB Gapps zip you'll need to flash as well.
CM10 - http://db.tt/ruKelCc5
md5 - 936c19daaf1697c6e8f6e526674052aa
JB Gapps - http://db.tt/A7YQwHqO
md5 - f62cfe4a827202899919fd932d5246d7
Hope this helps satisfy the curiosity of some.
Thanks for posting the link. It has been removed from the developers site. From what I've read they want to button up there CM9 project so its finished and then they can put there full attention towards CM10. The latest Targa version was from 9-1-2012. They removed it about 6 days ago. I have it but haven't installed it yet. I don't have a way of uploading it if it works. I think data is better but still buggy in this update and so they took it down till they can get a better version out.
You can upload it with the dropbox app and link to your dropbox account for people to download. With android, there's always a way.
Sent from my DROID BIONIC using Tapatalk 2
True... If I get a chance to mess with it I will post it. Time is a bit complicated on my end right now.
umm this is like all the others .. this is not JB its a rom bases off of ICS ....hate these kinds of posts
I haven't read or seen anything that shows this being built off ICS. Google speak works. It runs way smoother then ICS even as an alpha build. Because its KEXEC it can (and does) load a JB Kernal. People please correct my if I'm wrong. this is a quote from one of the developers, Hashcoe:
Originally Posted by Hashcode
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Either way this needs some polishing and we need to wait for an update anyway. I am going to keep an eagle eye on this CM10 project and keep everyone up to date as things progress. Thanks to the Devs Hashcode and dhacker29!!
StankFiss said:
umm this is like all the others .. this is not JB its a rom bases off of ICS ....hate these kinds of posts
Click to expand...
Click to collapse
zoompastu said:
I haven't read or seen anything that shows this being built off ICS. Google speak works. It runs way smoother then ICS even as an alpha build. Because its KEXEC it can (and does) load a JB Kernal. People please correct my if I'm wrong. this is a quote from one of the developers, Hashcoe:
Originally Posted by Hashcode
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Either way this needs some polishing and we need to wait for an update anyway. I am going to keep an eagle eye on this CM10 project and keep everyone up to date as things progress. Thanks to the Devs Hashcode and dhacker29!!
Click to expand...
Click to collapse
What does it say when you go to System Settings > About Phone > Android Version?
If it's 4.0.x, then ICS; 4.1.x, JB.
It says 4.1.1
Things are getting stable!
CHANGES LOG:
[09/24] - Fixed more data bugs. It's MUCH improved.
[09/21] - Updates STOCK-base build. Added HWComposer, Camera function, fixed native cm10 wifi tether and CM10 updates
I've updated the links in my OP. I'm downloading it now. A big round of applause for dhacker29 and hashcode for their hard work on this!