Database Develop

How 2 - ADB, Rooting(reflash), Unrooting, Nandroid, Remove/Install App, roms, kernels

So far, this is going to be a guide for noobs. Please read through this, and ask any questions that you have. This has been compiled from different guides around XDA, and information has been stripped that does not relate to our phones. More will be put up here when I find it, and all credit will be provided. This will be from 'duh' to 'didn't know that'. The idea is to provide a beginning to end explanation: Stock Incredible to Rooted with custom Rom.
Topics so far - ADB, Rooting (reflash), Unrooting, Nandroid, Remove/Install Apps, roms, kernels...
I'M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE DOING ANY OF THIS.... REGARDLESS OF WHY. Yadda, yadda, yadda...
**********At this point, I'm going to ask that you uninstall HTC Sync. Also, please uninstall HTC Driver... (whatever it's called) Nobody likes them (really though, it will mess up a lot of things. You can install them later when all this is done).**********
1) Setting up ADB
ADB stands for Android Development Bridge. It is used by Android developers for programming. For us, it is used to hack into our phones . For our purposes, just know that it is like the cmd (command prompt) that allows us to send commands to our phone. This is extremely useful when we're in the custom recovery
Download the Android SDK from Google: http://developer.android.com/sdk/index.html
Unzip to your desktop
Take the "android-sdk-_**-windows" folder and move it to the root of your hard drive (C:\)
** will change, it is revision of SDK, like "r6"
****The below is not necessary, but is useful sometimes if you just want to run "adb shell" from anywhere without going into the sdk directory****
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-_**-windows\tools
****End of the "This is not necessary thing****
Now, we get USB drivers to work. Some use HTC Sync for drivers, however HTC Sync does not like to play nice with the reflash tool (later on this), so we will use the generic google USB drivers.
1. Run SDK Setup.exe
2. If it gives you any error go to settings and click on "Force http//....."
3. Select usb driver package, let it download and install
4. Some say the below step is not needed, but I did this so I'm posting it
Go to tools folder, and edit "android_winusb.inf" (you can do this by opening it via wordpad). Add the following at the end of the [Google.NTx86] and [Google.NTamd64] blocks:
;HTC Incredible
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E&MI_01
%SingleBootLoaderInterface% = USB_Install, USB\VID_0BB4&PID_0C94
Save the file and exit.
5). Plug your phone into PC, when windows asks to install drivers for new found hardware, point the New Hardware Found wizaed to android_winusb.inf that you just edited.
============================================================
2) Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
============================================================
3) Check if your phone is detected by ADB
Open up Command Prompt (Go to run, type in cmd, press enter)
Type in:
cd C:\**your sdk name**\tools (Press Enter)
adb devices (Enter) You should see your device listed
adb shell (Enter) you should see $ in the next line
**After you obtain root**
su (Enter) you should see # in the next line if you are already rooted
**you may need to allow adb shell to run as root. Look at the phone and see if Superuser.apk is asking for your permission to allow adb root access. Click on "Remeber my selection" and select yes.
Now you are all set to run adb commands as root or as a regular user
**Note: for a list of commands that you can type using adb type "adb" in cmd
All Credit for Topics 1 - 3 go to user XDA member nephron. I mostly copied all of his guide, but updated some information on it to make sense for our phones. Also, removed some stuff I didn't see necessary. Please go to the original thread for the G1: http://forum.xda-developers.com/showthread.php?t=532719&highlight=nandroid+guide for a list of further Credits, and for information I've left out. If you like this thread, please donate to HIM
============================================================
4) Rooting your phone - READ THIS WHOLE SECTION BEFORE GOING TO ANY EXTERNAL LINKS PLEASE. At this point, running the UnrEVOked reflash3 tool will root your phone and install a custom recovery. To try to make it really easy to understand, recovery allows you to access your phone to make PERMANENT changes (something we can't do while booted yet), flash custom roms, and save your sorry little @$$ if you do something that you weren't supposed to
Ok, at this point, I'm going to ASSUME that you don't have HTC SYNC installed (or uninstalled it), and that you have the Google USB drivers installed (i.e. you read at least some of this post). The first thing we're going to do is:
1) Read this: http://forum.xda-developers.com/showpost.php?p=6875912&postcount=1
2) If you read #1, you already went here: http://www.unrevoked.com/rootwiki/doku.php?id=public:windows_hboot_driver_install
and downloaded the MODIFIED (i.e. changed, not the same, DON'T SKIP THIS STEP) driver and installed it
3) If you read #1, you already downloaded the reflash tool executable
4) If you read #1, you've already done #2, and 3, and this is just a worthless step of me explaining how important it is that you did #1
5) Lets do this. #1,2,3 and 4 were "get ready" steps. By now, you installed the modified driver, went to the webpage and downloaded the UnrEVOked3 reflash tool. HTC sync is also uninstalled. Plug in your phone (normally booted) to your pc and select "Charge Only" when asked how to connect to PC, and click on "remember my selection". Click Done.
6) Unplug Phone from PC.
6a) If you have double twist installed, at this time open the task manager on your pc, and kill doubletwist.devicehelpder....
7) Run the "reflash_package" executable that you just downloaded. Notice the path that it lists and click "install". This will unzip "reflash.exe" and a bunch of other stuff that is needed to the directory that you just noted. Go to this directory (usually the same one where the executable you just ran is) and run "reflash.exe"
8) Plug in your phone.
9) When the program is finished, you should see koush's clockworkmod recovery on your phone's screen and reflash will say that it's done. Congrats, you have root and a new recovery.
If something went wrong, and you're not on koush's recovery and reflash says it's done, don't worry, just re-run reflash. You can run it as many times as necessary. It will not hurt anything AT THIS TIME (this may change later)
10) Koush's recover works a little differently:
a) Vol+ and - scroll up / down
b) the Power button work as a "Back" button, and will turn off screen if you're at the root of the menu. If your screen goes blank, don't read, just hit Power again
c) To make a selection, click the optical trackpad
11) Reboot your phone by highlighting the selection and choosing it
For the most part, these instructions were written from memory, but all credit goes to UnrEVOked, Shadowmite, and anyone that they've given credit to in original links.
============================================================
5) Unrooting - I didn't want to re-invent the wheel, so I'm posting an external link:
http://androidforums.com/all-things...ideo-howto-unroot-incredible-downgrading.html
Just follow the instructions. Credit goes to the OP. If this link ever goes to a 404, pm me and I will find another link with instructions and update this. Also, if you don't understand something, just ask in this thread, someone will answer (maybe even me ).
============================================================
6) Whats is a Nandroid Backup?
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
Nandroid Backup is a tool allowing your Incredible that has koush ClokworkMod Recovery to create a full system backup and restore it, which, when flashing and testing different roms can be very useful.
A) Creating a Backup using Nandroid
Boot up your phone in recovery (Turn off, then turn on while holding Vol- and Power. Press Vol- once to highlight recovery, hit Power once to go into it)
You will now see your new koush recovery
Scroll down (Vol -) to "nandroid" and select it (press the optical button in)
"Backup" will be highlighted. select it
Let it work, it might take a while for a full system backup
Once its done, your backup is complete and is saved on your sdcard in the "clockworkmod" folder. Normally it's stored in the "nandroid" folder, however our Recovery does things a little differently.
B) Recovering to Your Nandroid Backup
Make sure u made a backup and its in the clockworkmod folder on your sdcard
Boot up your phone in recovery (Explained Above)
Go into "nandroid" in the recovery (also explained above)
Select "restore backup" and select from the backups you have (if you have multiple) that you want to restore; this will do a simple, "restore all" of your latest nandroid backup
:OR:
Select "Advanced Restore", choose from the backups that you have on your SD card, and then what you want to restore. You can individually restore "system", "data", "cache", etc....
In "Advanced Restore", i have not seen a way to restore multiple options (cashe AND system, etc...) Koush, am I missing something?
Let it work
Once its done, restore more options through the Advanced Restore menu, or reboot your phone and your selections will now be restored!
============================================================
7) Remove Apps
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Go into Clockworkmod Recovery (With phone turned off, Vol - + Power, then Vol - to select recovery, then hit Power)
2) Select "partitions" from menu, then select "mount sytem" You can also "mount sdcard" if you want to back apps up to sdcard
3) Connect Phone to PC
3a) Open a command prompt and navigate to your sdk\tools directory
3b) Type: adb remount (it shoud return successful)
4) Open Adb Shell on your pc (Type: adb shell)
It should automatically show #, otherwise type "su"
Type:
cd /system/app (enter)
5)Type ls (this will show you all of the stuff in the /system/app directory)
6) To "delete" apps, type the following:
/system/bin/mv Your_APP.apk Your_APP.apk.bak (i.e. CityID.apk CityID.apk.bak). If you want to clear up space on your internal storage for whatever reason, you can replace Your_APP.apk.bak with /sdcard/Your_APP.apk.bak (this will move the app to the root of your SD Card instead of just change it's name)
If you don't get errors, you're done.
*This does not delete apps, but changes their file type so they will not show up as an app, in case you want to get them back at any time later you still have them and don't have to frantically post threads on XDA asking for them.
============================================================
8) Install Apps to /system/app
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Place your app you want to install into the root of your sd card (this is easiest)
2) Go into Clockworkmod Recovery (Explained in 7)
3) Mount system and sdcard under partitions (Explained in 7)
4) Connect Phone to PC
4a) adb remount in command prompt (should sow successful) (again, in 7)
5) Open Adb Shell on your PC
6)
IF NOT at #, type "su" to go from $ to #.
Type:
/system/bin/mv /sdcard/Your_App_Name.apk /system/app/Your_App_Name.apk
7) If you don't get errors, you're done. You can unplug phone, and reboot
============================================================
9) Flashing Custom Roms
Download a ROM that you want to try. One of the roms from here are a good starting point: http://inc.sodpit.com/. They are mostly stable might get a few random reboots.
Steps:
1. Download Rom of your choice
1a. Right now, there might be two ROM types, a nandroid backup and an update.zip type file. For right now, I recommend sticking with the update.zip kind. These instructions are meant for it, but I just want you to make sure you know which type it is before you try to flash it.
2. Copy and Paste the downloaded file onto sdcard. Make sure it is not in any directory's of SD card, just on the sdcard (the "root" of it).
3. Verify it's there using Astro or some other File Manager just to be safe.
4. Download and Run Titanium Backup from the Market if you haven't already. (If you don't have it, get it, it's must have for root users.)
a. Select Menu, Batch, Backup user apps. (in Titanium Backup)
b. let it run, this will take some time.
5. When that's done open your command prompt, navigate to your sdk\tools directory, and type "adb reboot recovery" (Not within adb shell, but in command prompt in that directory. I'm not going to explain how to do this because it's already explained above. Also, if you're flashing roms then you're already familiar with it, or maybe you shouldn't be flashing roms ).
6. Do "Wipe data/factory reset" and "wipe cache partition" in Recovery **This WILL WIPE your phone**
7. Select "install zip from sdcard", then select "choose zip from sdcard", then select the name of the zip you want to install.
8. When that's done reboot your phone, once your done setting up all the settings, download titanium backup from the market again, and set that up.
9. In Titanium, Select Menu, Batch, Restore User apps.
After that's done you'll have all your apps that you had before, data included, with a fresh new rom to try out. Hope this helps!!
All credit for these instructions goes to tcbert2010, they were suggested to me, and I liked them. I modified them a BIT, so they make more sense to me and hopefully to you. See post #2 in Original Thread = http://forum.xda-developers.com/showthread.php?p=6953608#post6953608
============================================================
10) Installing custom kernels
I'm only mentioning Hydra's kernels. I'm running the Undervolted, NOT overclocked kernel with wireless N to preserve my battery to get more life out of it
**Taken from website's FAQ**
Q: So how do I install the kernel?
A: First step is to either download the kernel zip file straight to your phone, or download it onto your computer and put it on the sdcard of your phone. Next you turn the phone off hold volume down and power at the same time. When the phone is in HBOOT wait a few seconds for it to initialize then hit volume down once and then power to boot into Clockwork recovery. Once in clockwork recovery you want to select "Install zip from sdcard", then "Choose zip from sdcard". You will now see a listing of files on your sdcard select the kernel zip you downloaded, or if you downloaded strait to your phone go to the Downloads folder and select the kernel zip file. The kernel will now install to the phone and once it's done it will say install complete. Now you can hit the power button once to return to main menu and select "reboot system now" . Your phone will now reboot with the new kernel.
***
Go to: http://hydrakernel.net/ to download the kernels
Please read: http://hydrakernel.net/faq.htm to educate yourself. It's worth it.
Credit to EJHEART for the wonderful kernels! Where are my 2.2 kernels EJ ?
============================================================
Again, if you have suggestions, requests, or whatever please post or PM me.
PM Me if I missed giving someone credit. PLEASE!!!

reserved
reserved for future.

Reserved
reserved for future

Great thread topic... reserved for future use

Updated
Updated with Reflash instructions.

dreamersipaq said:
Help I'm stuck at waiting for system to settle
check these common issues:
- You switched your driver to the one from this post? It's NOT identical to the SDK one.
- You don't have any usb applications that might be taking focus while we are working with the phone right?
- Is the SD card present in the device?
- You did give su permenent access when you allowed it in superuser right?
More to come...
Click to expand...
Click to collapse
Good start, iPaq! I just want to plug Linux AGAIN. I had zero problems using reflash for linux and using Gparted in Ubuntu/Debian/Linux Mint mint means one can do all kinds of things that will become helpful very soon if not already (e.g., manipulate ext and swap partitions on the sdacard!). Aside from linux being Android's native file system, using a Linux distro just makes 110% good sense if you plan to do any developing for the DI/Android. Why poeple struggle so much with Windows when Linux is free is beyond me
2 cents deposited!

Additional items to add
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod

Great topic
Sent from my ADR6300 using XDA App

...
jdmba said:
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod
Click to expand...
Click to collapse
1) - Will update soon
2) - I BELIEVE that this works:
1) Go into Clockworkmod Recovery
2) Mount Internal Storage under partitions
3) Connect Phone to PC
4) Open Adb Shell on your pc
Type:
su (will change to #)
cd /system/app
mv CityID.apk CityID.apk.bak
you're done.
Not in front of my phone at this sec, but if mv does not work, try
busybox mv CityID.apk CityID.apk.bak or
/system/bin/mv CityID.apk CityID.apk.bak
*This does not delete it, but changes the file type so it will not show up as an add, in case you want to get it back at any time later.
If I'm wrong please correct me.
3) The easiest way to update recovery at this time is through Koush's Rom Manager. However, at this time I've read somewhere that it's not persistent. Let's give this a few days.

Updated
First Post Updated.

here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?

qwho said:
here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?
Click to expand...
Click to collapse
Take this opportunity to flash up to HBOOT 79, wipe, and re-root. Start fresh. Re-reflash w/unrevoked2. Alles in Ordnung! At least, that solved all of my problems. Start with the big headache to avoid later headaches. Once you have a nandroid of a "proper" root, you'll never have to do the annoying initial root again.

So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?

qwho said:
So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?
Click to expand...
Click to collapse
Exactly. Doing will wipe out all userdata, everything not stored online, on your card, or on internal disk. It's really the best way to go, to start fresh and remove all the little variable piecemeal rooting has placed in your path to date.

can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.

qwho said:
can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.
Click to expand...
Click to collapse
Just down this, run it in Windoze, and before it tries to flash (you don't need your DI connected!), go into your AppData/temp directory, find the ~142mb rom.zip file, rename it to PB31IMG.zip, put it on /sdcard root directory, boot into bootloader, let the card/file get picked up while holding down-volume, ok the flash, no need to ok the reboot, then boot into to recovery and proceed with adb shell/rooting process one

I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!

sanchagrins said:
I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!
Click to expand...
Click to collapse
Not sure what you mean. Go into Hboot, and select recovery. When Koush's recovery loads, use Vol- to highlight "nandroid". Click the optical button in, and you'll enter another menu. Select the first option, which should be highlighted by default, which should be "Create Backup" or "Backup Device" or something like that.
Let me know if that works.

When I go into recovery the only options I get are:
Reboot System now
Apply sdcard: update.zip
Wipe data/factory reset
Wipe Cache partition
----------------------------------
E:Can't open /cache/recovery/command
Click to expand...
Click to collapse
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?

sanchagrins said:
When I go into recovery the only options I get are:
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?
Click to expand...
Click to collapse
You can't install anything to recovery that will stick until you get root via procedure 1, then reflash with unrevoked 2. Sounds to me like you've gotten ahead of yourself

How to Install 4.2 images, keep root and all data

**Disclaimer** If you don't understand what follows, don't attempt this. I'm not responsible for you softbricking your device,
This is a quick guide for how to install the new android without losing anything. You'll need fastboot for this. Also, before doing this, be sure to download the supersu cwm update zip, and have it on your sdcard. Make sure you also already have a custom recovery installed (I did twrp, but i'm sure cwm will work just as well). I would also suggest having a backup done, through titanium backup and through recovery, just incase.
First, download the factory images for the n7 from google's website. Decompress them (if you're in windows, you'll need winrar or something similar.) After you decompress the archive, there'll be another one inside (image-nakasi-jop40c.zip), decompress this one as well. Under here, you'll see the .img files for all the partitions. For now, go up one directory. You'll also see here bootloader-grouper-4.13.img. Once you have all this, reboot into the bootloader.
Once you're in the bootloader, you can update the bootloader to the new version (this step isn't needed, but I did it anyways). Plug into your pc, and type fastboot devices. Make sure it's not blank. If it is, you have to update drivers. If you can see the device, open up a command prompt, and cd to the directory that has the bootloader-grouper file. Type the following:
fastboot flash bootloader-grouper-4.13.img
then, after it's done, type:
fastboot reboot-bootloader
Now, you'll be booted back into the bootloader, it'll say 4.13. On to the rom.
cd into the folder image-nakasi-jop40c (make sure you see the files system.img and boot.img before you continue. If you don't see them, the next steps will do nothing but erase your kernel and system parition.)
now, you see the image files. Type the following (still in the bootloader)
fastboot erase system
fastboot flash system system.img
wait until it completes, then type:
fastboot erase boot
fastboot flash boot boot.img
Once this is done, hit the volume up on the device until it shows recovery mode on the top. When it does, push the power key and you'll boot into your recovery (shouldn't be touched.) Inside here, flash the supersu cwm zip file, which'll flash the superuser binary, and supersu. Once this is done, do a factory reset (removing your data and cache.) Boot into the rom.
Once it's booted, you'll notice your internal sd card appears to be empty (mine did, I was worried at first.) For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place. You now have the rom booted, rooted, with all your data. Now, you can do a titanium restore to get all your stuff back.
My first boot got stuck for some reason. if it happens to you, just hold the power button and hard reboot. (I did this on 2 devices, it only happened to one of them, so I figured I'd give you all warning.)
Links:
SuperSu binary: https://docs.google.com/open?id=0B7a8xHNJlpgTR0ZkR1pWZWR2VzA
Google Factory Images: https://developers.google.com/android/nexus/images

Thanks for this.
I flashed the 4.2 ota in the dev section and I lost root. Can I just flash the supersu binary in cwm to regain root?

Thanks for this.. Apparently you found out too a clean 4.2 isn't rootable via typical methods.
That SuperSU package did the trick. I have to remember to keep a SuperSU binary on hand for these kinds of situations that SuperUser fails..

jefferson9 said:
Thanks for this.
I flashed the 4.2 ota in the dev section and I lost root. Can I just flash the supersu binary in cwm to regain root?
Click to expand...
Click to collapse
Yes. If you do it though cwm, you're not using any exploits, you're just inserting the superuser binary and supersu.apk into the proper places on the rom. On any nexus device, any rom, this will root it.

mstrk242 said:
Once it's booted, you'll notice your internal sd card appears to be empty (mine did, I was worried at first.) For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place.
Click to expand...
Click to collapse
DANGER WILL ROBINSON!!
The "odd reason" is called "multiple users" - add a second user and they get a folder called 10.

tehSmoogs said:
DANGER WILL ROBINSON!!
The "odd reason" is called "multiple users" - add a second user and they get a folder called 10.
Click to expand...
Click to collapse
Exactly.
If everything goes right we should have an AOSP prerooted build in about *looks at watch* 20 minutes.... Unless there is a compile error or SU error. *laff*
Back to watching the scrolling terminal window

Just got this working on a mac...
did not update bootloader(couldnt get it to)
other than that, same commands except all fastboots are ./fastboot on a mac
the only other trick is i needed the fastboot and abd files in the jop40c folder...seems to have worked like a charm....im deff on 4.2 with su installed... and it looks like my data is still there...once google is done restoring i'll know just how sucessfull it is, but so far, seems to work!!!

kwhee07 said:
Just got this working on a mac...
did not update bootloader(couldnt get it to)
other than that, same commands except all fastboots are ./fastboot on a mac
the only other trick is i needed the fastboot and abd files in the jop40c folder...seems to have worked like a charm....im deff on 4.2 with su installed... and it looks like my data is still there...once google is done restoring i'll know just how sucessfull it is, but so far, seems to work!!!
Click to expand...
Click to collapse
I did this all on linux, just kind of adapted the guide for windows. I figured all the linux users would understand how to do it on their own. Glad to know it's the same for mac as well.

OK where did they put the developer options? Not in settings on my 32GB 4.2 device
Never mind. This: http://www.androidpolice.com/2012/1...hidden-in-android-4-2-heres-how-to-find-them/

rootbrain said:
OK where did they put the developer options? Not in settings on my 32GB 4.2 device
Never mind. This: http://www.androidpolice.com/2012/1...hidden-in-android-4-2-heres-how-to-find-them/
Click to expand...
Click to collapse
Settings - about tablet - build number
push it a few times and it will enable dev options

You have .bat file in the package.

Why so complicated?
I downloaded 4.2 from here:
http://android.clients.google.com/p...gned-nakasi-JOP40C-from-JZO54K.094f6629.zipia
I then just flashed it from recovery via CWM.
Done.
CWM asked me if I wanted to maintain root and of course I chose the correct answer on this, so now my N7 is running on a rooted 4.2.

Here is my method:
1. Download official 4.1.2 from http://forum.xda-developers.com/showthread.php?t=1929270 and 4.2 OTA image from http://forum.xda-developers.com/showthread.php?t=1989188
2. Boot into CWM (i have CWM touch installed)
3. Clear data and install 4.1.2, don't forget to turn on root in the installer
4. reboot check that root is fully working
5. reboot into recovery install 4.2
6. before reboot CWM will ask to disable recovery flash and protect root. Ansver yes to both questions

I'm confused, it says if you are already on a custom rom, just flash as usual.
What makes this different?

I was on stock ROM rooted with some system modifications, and this wwadd the only way I could get the update working...
Sent from my Nexus 7 using xda app-developers app

mstrk242 said:
For some odd reason, it moved the entire contents of my sdcard into a folder on it called 0. When you get back into android, simply move the folder all up one level so they're in the proper place. You now have the rom booted, rooted, with all your data. Now, you can do a titanium restore to get all your stuff back.
Click to expand...
Click to collapse
So I'm at the step listed above. I have 4.2 on my device but I can't seem to find this "0" folder. I'm browsing the /sdcard folder via adb shell. Am I looking at the wrong place? Do I have have the incorrect permissions? Or might it not be there?
Thanks.

Ill have to wait until a rooted rom is created, I have no comp.
Sent from my Nexus 7 using XDA Premium HD app

can I install image-nakasi-jop40c.zip directly without upgrading bootloader?

Zuk. said:
So I'm at the step listed above. I have 4.2 on my device but I can't seem to find this "0" folder. I'm browsing the /sdcard folder via adb shell. Am I looking at the wrong place? Do I have have the incorrect permissions? Or might it not be there?
Thanks.
Click to expand...
Click to collapse
Not advisable to move this folder - if it got moved to a new location by the o/s then there's probably a good reason why - maybe like 4.2 introducing multiple users
Each user appears to get their own "home" directory created in /mnt/shell/emulated/
Default user dir is "0"
Second user dir is "10"
Each contain the standard dir's from 4.1 and earlier.

Travelawyer said:
Why so complicated?
I downloaded 4.2 from here:
http://android.clients.google.com/p...signed-nakasi-JOP40C-from-JZO54K.094f6629.zip
I then just flashed it from recovery via CWM.
Done.
CWM asked me if I wanted to maintain root and of course I chose the correct answer on this, so now my N7 is running on a rooted 4.2.
Click to expand...
Click to collapse
You had two extra characters at the end of your link, but I fixed it above and it's good to go for others in the future. Just flashed it in TWRP, it didn't ask if I wanted to maintain root, hit reboot when it was complete and lost root, so it doesn't work for everyone - good news is that all my data remained intact without having to resort to advanced restoring my data from a backup....
When I tried the SuperSU binary root flash trick, I finally got root back. But don't think it's as easy to get to recovery! I had to obtain the TWRP Recovery one more time since it wiped it and put in place a recovery that did absolutely nothing but reboot the device after a few minutes, so you'll have to
Code:
fastboot flash recovery openrecovery-twrp-2.3.1.1-grouper.img
to get TWRP back.... Hope that helped everyone!

[GUIDE] Nexus 5 - How to Unlock Bootloader, Install Custom Recovery and Root

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Setup, Preparation and Prerequisites
Basic tasks that I may refer to throughout this guide:
Open command prompt - Press Window Key + R, type in "cmd" (without the quotes), and hit enter.
Enter the bootloader - Turn the phone off. Hold volume down + power. The bootloader is also known as fastboot mode.
ADB and Fastboot Installation
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only) or get a slimmed version containing only the essential components(Thanks @El Daddy)
Link removed since it expired
Extract the zip and place the android-sdk-windows folder on your desktop.
**If you chose to download the slimmed sdk skip to step 5**
Only if you downloaded the full sdk: Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
- Tools > Android SDK Tools, Android SDK Platform-tools
- Extras > Android Support Library, Google USB Driver
Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
To confirm that it is indeed working, open a command prompt window and enter the following commands:
Code:
cd Desktop/android-sdk-windows/platform-tools
adb version
If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case. Close the command prompt window when you are done.
USB Debugging - On your phone go to Settings > About phone > Tap on Build number 7 times. This will enable Developer options. Now go back to Settings > Developer options > Enable USB debugging
Show File Extensions - Open a command prompt window and run "Control folders" (without the quotes). Go to the View tab and uncheck the "Hide extensions for known file types" option. This will help avoid confusion when renaming files.
Battery - Ensure that your phone has at least 60% battery remaining, and that your PC is plugged in and wont shut down spontaneously during the process. The procedure doesn't take very long (5-15 minutes), but its best to have enough charge in case something goes wrong.
Backup (Optional) - Unlocking the bootloader will completely wipe all data from the device. This includes apps, settings and even the contents of the internal sdcard (pictures, music, etc.). Copy all important files off the phone onto a PC or upload them to a cloud.
Driver Installation - Try this first, but if that doesn't work look here. Still having issues? Give this a try. None of these working? Hopefully this does the trick.
Downloads
Download a custom recovery of your choice and the SuperSU zip below. Place both files (recovery image and root zip) in the platform-tools folder located on your desktop within the android-sdk-windows folder.
Custom Recovery:
TeamWin Recovery Project (TWRP) or ClockworkMod (CWM)
Root:
SuperSU
Information
Rooting a nexus device is actually quite a simple and easy process. Before you begin, it is recommended that you at least try to understand what each part of the process will do. Although this guide will elongate each step in order to show all of the details, the method used can be broken up into 3 main steps: Unlocking the Bootloader, Installing a Custom Recovery and finally Rooting. Each new step relies on the previous step to have been completed, and a basic summary of each part is:
Unlocking Bootloader: Opens the door to the internal memory of the device to be written on to. This allows you to flash images onto the main partitions of the phone.
Installing a Custom Recovery: A custom recovery is flashed onto the recovery partition of the device and overwrites the stock recovery that exists by default. Custom recoveries bring lots of functionality and give you the ability to perform wipes, install flashable zips, create full backups of your NAND (Nandroid backup), and various other features. An unlocked bootloader is needed to install a custom recovery.
Rooting: You can gain root by either flashing via recovery a pre rooted custom rom, or flashing a zip containing the SuperSU binaries. A custom recovery is necessary to do this.
After completing these steps your phone will be rooted, the phone will have a custom recovery installed, and the phones bootloader will be unlocked. This, in my opinion, is the most practical and beneficial method for rooting your phone. It gives you some basic adb/fastboot knowledge, and should hopefully help you have a decent understanding of what is going on. Also this method will work regardless of what android version your phone has. Using a toolkit will only make things worse in the long run...learn to do it properly. It has been proven that every time you use a toolkit, god kills a kitten. Save the kittens.
If you are confused by anything in this guide, I would highly suggest getting it clarified being before moving on. Ask your question in this thread and I or someone else will likely answer. Also I'd suggest that you read over the whole thread a few times before actually doing anything to the phone.
Understand? Good...lets begin:
1. Unlocking Bootloader
Turn the phone off. Then boot it into the bootloader/fastboot mode by holding volume down + power.
Plug the phone into your PC, then open a command prompt window window and type:
Code:
cd Desktop/android-sdk-windows/platform-tools
Code:
fastboot devices
This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue you must fix your drivers so that your phone is listed under fastboot devices.
If the phone has been recognized by the command above, proceed to unlocking the bootloader with the following command:
Remember that this step will wipe EVERYTHING off the phone
Code:
fastboot oem unlock
On the phone a screen should pop up asking whether or not you would like to unlock the bootloader. Use the volume rockers to highlight "Yes" then press power to confirm the action.
After the above command has finished excuting, run the following (DO NOT skip this step, it is more important than you think):
Code:
fastboot reboot
The phone will reboot. Next you will be presented with a screen containing an android logo and a progress bar (this may take up to ten minutes to complete). Wait until the phone has fully booted up into android, then proceed onto the next section of the guide.
Close the command prompt window.
2. Installing a Custom Recovery
Turn the phone off. Then boot it into the bootloader/fastboot mode by holding volume down + power.
Rename the recovery file that you downloaded above to recovery.img. *Make sure that you rename it to recovery.img NOT recovery.img.img* Remember that you should place the file in the platform-tools folder inside of the android-sdk-windows folder on your desktop.
Open command prompt and run the following commands:
Code:
cd Desktop/android-sdk-windows/platform-tools
Code:
fastboot flash recovery recovery.img
On the phone, use the volume buttons to scroll onto "Restart Bootloader" and hit power to select it. After the bootloader reloads, use the volume buttons to scroll onto "Recovery Mode" and power to select it. You should then be greeted with your newly installed custom recovery.
Close the command prompt window.
3. Rooting
Now that your phone has an unlocked bootloader and a custom recovery installed you have a two options to gain root (Pick one or the other. You don't need to do both)
Option A) Flash SuperSU binaries which will give you root with the stock rom
Confirm that you have downloaded the SuperSU zip from the downloads section above and that it is located in the platform-tools folder inside of the android-sdk-windows folder on your desktop.
Turn the phone off then boot into the bootloader. (volume down + power). Once in the bootloader use the volume rockers to scroll onto Recovery Mode, then press power to select it. This should bring you into your newly installed custom recovery. Leave the phone at the home page of the custom recovery.
Open a command prompt window and run the following commands:
Code:
cd Desktop/android-sdk-windows/platform-tools
Code:
adb push UPDATE-SuperSU-v[COLOR="Red"]X[/COLOR].[COLOR="red"]XX[/COLOR].zip /sdcard/
This will copy the SuperSU zip onto your phone. Once the command has completed continue.
Instructions for TeamWin Recovery Project (TWRP):
Install > browse to SuperSU zip and select the it
Swipe to confirm the installation. Then reboot.
Instructions for ClockworkMod (CWM):
install zip from sdcard > choose zip from sdcard.
Next, browse to the location where you previously copied the SuperSU zip and select the it.
To confirm the installation, scroll down to "Yes" and select it. The installation shouldn't take very long, and once it has completed you may reboot.
Option B) Flash a custom rom which will come pre-rooted
Note that not all custom roms will be pre rooted, however the majority of them are. Read the OP of the ROM thread to see what the verdict is.
Copy a custom rom (you can find these in the Nexus 5 Android Development and Nexus 5 Original Android Development section) onto the phone (remember the location where you copy it to)
Turn the phone off then boot into the bootloader. (volume down + power). Once in the bootloader use the volume rockers to scroll onto Recovery Mode, then press power to select it. This should bring you into your newly installed custom recovery. To install a custom rom the general procedure to follow is: factory reset, wipe cache + dalvik cache, flash ROM, flash GApps. Here are the recovery specific instructions:
Instructions for TeamWin Recovery Project (TWRP):
Wipe > Swipe to Factory Reset
Install > browse to the location where you previously copied the ROM zip and select it > Swipe to confirm the installation
Install GApps using same process as ROM, then reboot.
Instructions for ClockworkMod (CWM):
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
install zip from sdcard > choose zip from sdcard > navigate to the location of the rom > select the rom > confirm the installation by selecting "Yes"
After that you may install the GApps using the same method for flashing the rom, and finally reboot the phone.
Keep in mind that the first boot after installing a custom rom & wiping the phone may take longer than usual, as the phone will need to rebuild the dalvik cache and initialize other first boot stuff.
Congrats! That is all! Your phone now has an unlocked bootloader, a custom recovery installed and is rooted...Plus you saved a kitten. Enjoy

Troubleshooting & FAQ
Why am I seeing a red triangle with a dead android when booting into recovery even after I flashed a custom recovery?
What you are seeing is the stock recovery, meaning that the custom recovery that you flashed did not install correctly. Try the following suggestions:
Make sure you are using the USB cable that came with your phone. Only use other ones, if the stock one isn't working
Try using different USB ports. USB 2.0 ports (the ones that ARE NOT blue) are preferable. USB 3.0 ports (the blue ones) may cause problems with connectivity.
If you are on a desktop, use the ports on the back of the tower instead of the ones in the front. These ports are directly connected to the motherboard, rather than the ones in the front which are usually attached to a header cable which then indirectly connects to the motherboard.
My phone wont boot into android. I can only access the bootloader and custom recovery. What do I do?
Suggestion 1: Factory reset via recovery.
TWRP Instructions:
Boot into recovery
Wipe > Swipe to Factory Reset
Reboot
CWM Instructions:
Boot into recovery
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
Reboot
If that doesn't work continue onto Suggestion 2.
Suggestion 2: Push a ROM to your phone and flash it.
Download a ROM onto your computer. If you don't have time to look for a ROM, just download the stock ROM.
Move the downloaded ROM onto your desktop, and rename the file to "ROM.zip" (without the quotation marks)
Boot phone into recovery
Open command prompt and run the following commands:
Code:
cd Desktop
adb push ROM.zip /sdcard/
Wait for it to finish copying the file, then flash the ROM. If you need further details on how to flash a ROM take a look at the OP, section 3. Rooting, Option B)
If that doesn't work continue onto Suggestion 3.
Suggestion 3: Flash the factory images.
Flash the factory images
My phone wont boot into android. I can only access the bootloader. What do I do?
Flash the factory images
My phone exploded. What do I do?
Tape it back together then flash the factory images

Awesome post. Got a question: if I ONLY unlock bootloader will I still be able to get and install OTA updates?
Sent from my Nexus 4 using Tapatalk

dombera said:
Awesome post. Got a question: if I ONLY unlock bootloader will I still be able to get and install OTA updates?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yes, if you only unlock the bootloader you will still be able to get ota's. The lock state of your bootloader will not affect your ability to receive ota's.

Chromium_ said:
Yes, if you only unlock the bootloader you will still be able to get ota's. The lock state of your bootloader will not affect your ability to receive ota's.
Click to expand...
Click to collapse
Awesome, thx
Sent from my Nexus 4 using Tapatalk

This is awesome, will come in handy.
Sent from my HTC Desire using XDA Premium 4 mobile app

Chromium_ said:
Yes, if you only unlock the bootloader you will still be able to get ota's. The lock state of your bootloader will not affect your ability to receive ota's.
Click to expand...
Click to collapse
What about if you unlock the boot loader and root, will you be able to get OTAs then? I guess a better question is what's the point of no return (without reflashing the factory image) where you break OTA updates? Thanks for the thread btw!

Can people please post confirmation of TWRP or CWM recoveries + rooting working without problems if they've done it? I know it's unofficially supported at this time, but getting some data collected would be useful.
---------- Post added at 01:43 AM ---------- Previous post was at 01:41 AM ----------
Xero258 said:
What about if you unlock the boot loader and root, will you be able to get OTAs then? I guess a better question is what's the point of no return (without reflashing the factory image) where you break OTA updates? Thanks for the thread btw!
Click to expand...
Click to collapse
If you unlock bootloader & root, and modify some system files, OTAs may not be able to pass some pre-install checks, at least this has happened to me on N4 before. I added one line to /etc/build.prop, also one of the older SuperSU versions had to be uninstalled for pre-install OTA checks to pass.

Whyzor said:
Can people please post confirmation of TWRP or CWM recoveries + rooting working without problems if they've done it? I know it's unofficially supported at this time, but getting some data collected would be useful.
Click to expand...
Click to collapse
There isn't *yet* a booting custom recovery for the Nexus 5. Give it a couple of days.

I see some Desire folks
Did u order one chromium?

Is unlocking the bootloader going to be the same as on my GNex, where it wipes the device in the process? If so, this will be the first thing I do when I get it out of the box on Monday.

talz13 said:
Is unlocking the bootloader going to be the same as on my GNex, where it wipes the device in the process? If so, this will be the first thing I do when I get it out of the box on Monday.
Click to expand...
Click to collapse
If you wipe cache exactly after you unlock the bootloader, without booting, no.

Nbsss said:
I see some Desire folks
Did u order one chromium?
Click to expand...
Click to collapse
Not yet. Hoping to eventually get it though.

Whyzor said:
Can people please post confirmation of TWRP or CWM recoveries + rooting working without problems if they've done it? I know it's unofficially supported at this time, but getting some data collected would be useful
Click to expand...
Click to collapse
There are currently no working custom recoveries, so it really only makes sense to unlock the bootloader for now. That way you'll be ready to continue on with the guide right when a stable recovery is released.
Sent using xda-developers app

Nbsss said:
I see some Desire folks
Did u order one chromium?
Click to expand...
Click to collapse
I'm not a really famous desire user but yes I bought it. Did you buy it to? Happy to see some other desire users.
Sent from my HTC Desire using XDA Premium 4 mobile app

Maybe it's a silly question, but can I unlock the bootloader before even booting up the phone for the first time? Can this cause some problems?

boysetsfire said:
Maybe it's a silly question, but can I unlock the bootloader before even booting up the phone for the first time? Can this cause some problems?
Click to expand...
Click to collapse
It should work fine, but whats wrong with booting it up for the first time?

Chromium_ said:
It should work fine, but whats wrong with booting it up for the first time?
Click to expand...
Click to collapse
Nothing wrong, just the laziness of not wanting to do the initial setup two times

Chromium_ said:
There are currently no working custom recoveries, so it really only makes sense to unlock the bootloader for now. That way you'll be ready to continue on with the guide right when a stable recovery is released.
Sent using xda-developers app
Click to expand...
Click to collapse
abaaaabbbb63 said:
There isn't *yet* a booting custom recovery for the Nexus 5. Give it a couple of days.
Click to expand...
Click to collapse
Ok, the wording in OP is:
"Currently neither recovery has official support for the Nexus 5, so the download links below are unofficial and may not be functioning 100% correctly."
and:
"**Warning: Currently there are no officially stable custom recoveries, so i would only recommend unlocking the bootloader for now**"
Which implied that it does work, just not thoroughly tested. Now from the recent replies you're saying it DOES NOT boot at all into recovery?

Whyzor said:
Ok, the wording in OP is:
"Currently neither recovery has official support for the Nexus 5, so the download links below are unofficial and may not be functioning 100% correctly."
and:
"**Warning: Currently there are no officially stable custom recoveries, so i would only recommend unlocking the bootloader for now**"
Which implied that it does work, just not thoroughly tested. Now from the recent replies you're saying it DOES NOT boot at all into recovery?
Click to expand...
Click to collapse
Yes that is correct, they do not boot. I will update the OP now, sorry for the confusion.
Originally I had read the following threads and it seemed that they were somewhat functioning, but it is now confirmed that neither one boots.
TWRP
CWM

[Q] Full tutorial to put KitKat on N1. Who wants to test?

Hi all, I wrote a long-winded Tutorial to put Evervolv KitKat on a stock N1. I don't have a stock N1 (I stumbled all the way through this process and got done yesterday, was so excited I wrote this tutorial) and don't know how to get it back to stock, so I'm wondering if anyone who has one and has experience putting new ROMs on other devices would like to test this out and let me know if anything doesn't work as written. Please go ahead if you like and reply your updates! Once it's dialed I'll make it a thread in the N1 ROMs forum.
Here's the text:
How to put KitKat on a Nexus One (And have computing power & space to spare):
Things you'll need:
1. A Windows/Linux computer with internet connection, USB port, and terminal
2. A USB Cable
3. A Nexus One with the most recent stock gingerbread rom (Settings->about, look for Android 2.3.6 or GRK39F, else apply/google updates to get to that version)
Before you begin, note that you're playing with a generally safe form of fire, but when playing with fire, you may brick your phone. The maker of this guide and any sites you visit during the process assume no responsibility, the user assumes full responsibility for lost work and damaged or ruined phones. Your warranty will be voided about six times over. Save all your stuff somewhere, save apps with Titanium Backup (Google it) or something, and do a full Nandroid backup (Goog that too) before you begin. You will be fully wiping your phone and SD card multiple times. Make sure at every step of the process that your battery is at least half full. Running out of battery during an update can cause bricks. In this guide, “Boot” means standard boot, the way it normally turns on. Not hboot or fastboot or recovery.
I did part of this from a Windows7 computer on Cygwin and part on Ubuntu 12.04, each presented some annoyance but by far the greatest was due to my Linux ineptitude with PATH and Root. If you're trying the same, I've made an appendix for that.
It may help to have a brief conceptual overview of what you'll be doing in case you run into snags and have to step out of the walkthrough. Your N1 has a few basic parts: Internal memory that is chopped into 3 partitions: One for the system files (System) , one for the files that they will need to make during the first bootup and use in order to operate, along with your apps and their created files (Data) and one for temporary files that your OS and apps can regenerate (Cache). Somewhere in there it also has space for a Radio (that also includes some critical power functions, flashing a new radio is the easiest way to brick an N1 but we won't), as well as a Recovery partition and an Hboot&Fastboot partition. We will be messing with Recovery and Hboot. The virtual machine that turns all the friendly pseudo-english computer code into 1s and 0s for the processor to deal with is called Dalvik, named after a town in Iceland where some old dev's family is from. It has its own Cache (the VM, not the town, as there are no longer any fish in Iceland ). It's SOP to wipe Cache & Dalvik before and after applying any updates, and wipe Data (Factory reset) before applying most updates. Sometimes when my phone bogs I reboot to recovery and wipe caches just for funsies. This makes it take longer to boot the phone and to use each app just the first time after that, while the files are created fresh. The phone also should have an SD-Card. You should have or buy an 8+MB, Class 10 SD card. The class relates to read/write speed, anything less than 10 will noticeably slow your Nexus One's operation. Why?
Because we're going to put some of your operating system on the SD card. We're going to use a special recovery system (aka recovery ROM) called “4ext” to partition your SD card. Mine is 16GB, partitioned to 14GB for storage and 2GB to use as fake internal memory, where my system's Data and Cache live. The KitKat System files that normally live on internal memory's System partition are too big for a normal N1, so we'll use a special Hboot called BlackRose to repartition your internal memory so you can fit KitKat, and then after you first boot it up we'll use an app called Mounts2SD to install a startup script so that every other time you boot it up after that, it will know to find Data and Cache on the SD card. In order to install BlackRose, you'll need to be running CyanogenMod Rom as your main OS, and in order to do that you'll need ClockWorkMod Recovery ROM. So the installation order will be: ClockworkMod recovery->Cyanogen7OS (Gingerbread based)->4ext recovery to partition SD card->BlackRoseHboot to repartition internal memory->Evervolv KitKat-based N1 ROM-> run Mounts2sd for startup scripts ->reboot to your new life among the anatomically modern cyborgs (and then you're on your own for getting all your apps and music and contacts and stuff back on the phone from wherever you saved it).
Ready? Here we go!
1. Install the Android SDK on your computer.
1. Get the appropriate version here: http://developer.android.com/sdk/index.html
2. Unzip it.
3. Run the setup.exe (if using windows)
4. When asked which packages to install, choose “Android SDK Tools”, “SDK Platform Android 2.1″, and “Usb Driver package” (If you use eclipse, check that last link for instructions on using the ADT plugin (Not the same ADT that cuts your paycheck, much less inept))
5. Make sure the USB drivers installed properly (windows).
1. Go to printers and devices in the control panel, or device manager
2. If you see an android device with no warnings, you're golden. If it has warnings, right click it and go properties->update driver (driver can be found in your android sdk directory where you unzipped the sdk bundle, in \usb_driver).
6. Boot up your N1 and plug it in to the computer. If the computer recognizes it and they play nice, you're set with the sdk. To extra check, open terminal and cd to the sdk's platform-tools folder that should contain the adb utility. Type #adb devices and see if it comes up with a message telling you that it's running a daemon on a port like 5037, and then lists something like HT9CPP800063 device. This is your phone, it's telling you you're beyond connected. You've got the sdk working. Else have your friend Google help you get the SDK properly installed.
2. Root the phone so it will let you dig in.
1. Put your N1 in USB debugging mode (Settings > Applications > Development > USB Debugging)
2. In the terminal, in the platform-tools folder, type #adb reboot bootloader. (((My phone has a power hardware issue and will not reboot while plugged in ever to any mode ever at all ever, if yours does too you can unplug (first type #adb kill-server to make it ok to unplug) the usb cable, power down, wait five seconds, and hold the trackball and power button to power back up into the bootloader, then plug in again. There was a lot of unplugging, waiting fifteen seconds, booting while holding buttons, plugging in, adb devices -ing that I will omit henceforth due to low likelihood that you have the same problem.)))
3. Using the onscreen directions on the phone and the hard buttons, navigate to fastboot mode. It may be unresponsive and throw some not-found messages for five seconds before it lets you do anything.
4. In the terminal on your computer, in the platform-tools folder, type #fastboot devices to see if your devices is connected (it should come up with the same HT#XXX###### number).
5. This step will gain Root access, unlock the bootloader, and WIPE ALL YOUR ****. Now type #fastboot oem-unlock . You may have to accept the warranty voiding. If for whatever reason it doesn't work, use this method http://code.google.com/p/bexboot/, and unzip the files to the platform-tools folder.
6. Using the phone buttons, reboot. Your little lock logo during the bootup should be unlocked now.
7. Power down and boot again for good measure. Re-enable usb debugging in the phone app dev settings.
3. Get ClockworkMod Recovery.
1. Download koush's ClockworkMod Recovery from : recovery-clockwork-5.0.2.0-passion.img and put it in the platform-tools folder.
2. To make sure the file is not corrupted and will not brick your goods, check the md5sum. This is the result of a complicated equation that easily reveals even a single flipped bit in the file by vastly changing the output. Google how to do this, in windows you'll need to download a tool like winmd5free. The output for this particular file should be: md5: 45716c8d51ed2375873f01f0b14b2184 If it's anything else don't use it.
3. Reboot to the bootloader again, either by #adb reboot bootloader or by powering up while holding the trackball, and navigate to fastboot.
4. Verify that you're connected with #fastboot devices
5. Flash ClockworkMod Recovery by typing #fastboot flash recovery recovery-clockwork-5.0.2.0-passion.img
6. It should give a success message. Reboot to recovery from the fastboot menu. It should be a sweet new blue and white ClockWorkMod recovery. Power down and reboot to recovery by holding volume up as you power up, just for good measure.
4. Get CyanogenMod7 ROM.
1. On your computer, go to http://download.cyanogenmod.org/?device=passion&type=stable and download the latest stable CM7 zip. Put it in the platform-tools folder.
2. Check its md5 as you did in part 3.
3. Do #adb-devices, which should give you that serial again, and the word recovery.
4. Place the zip file on the root of your SD card by doing #adb push cm-7.2.0-passion.zip /sdcard/
5. If that last step failed, try running #adb shell mount /sdcard or #adb kill-server then #adb devices then #adb shell mount /sdcard, then try the push again. Or mount the sdcard through the recovery menu before running that push command. Or use your computer's file system to drag and drop the .zip to the root (lowest) folder of the sd card.
6. Using the recovery menu, in backup and restore options, backup your current ROM.
7. In the format menu, do a wipe data/factory reset. Wipe the cache and dalvik cache while you're at it.
8. Back in the main recovery menu, do install zip → choose zip from sd card.
9. Select that CM7 zip file.
10. Return to the main menu and reboot the system. It should come up with a totally different looking leaner meaner version of Gingerbread, that gives you more control and speed and saves battery. But even with this system, given modern app sizes, you'll soon run out of room on the internal memory if you stop now. And besides, you're having too much fun.
5. Get 4EXT recovery
1. Go to 4ext.net and download the free .apk file: http://www.4ext.net/get.php?apk Congratulations if you're about to install your first not market app (apps are now .apk, not just something you get from the store's GUI.). Save it in platform-tools. Or, to be really nice to Max, you can just buy the app in the play store and skip the next two steps.
2. Enable USB debugging, plug in and #adb-devices.
3. # adb install 4EXTRecoveryUpdater.apk. You should get back a success message in a fistful of seconds.
4. At this point you may need to back out to regular settings, turn on wifi, and hook up to your wifi router.
5. Open the 4ext recovery updater app. Go to settings. Allow superuser permissions and everything else. It should detect Nexus One, connect to the internet, and boot you back to the main menu.
6. Go to online install. They're all release candidates and no stable versions, so just go with the newest one. Select install.
7. Wait for it to finish and then reboot to recovery, either by # adb reboot recovery or manually. You should have a beautiful new touchscreen recovery.
6. Partition your SD Card
1. In recovery, go to tools->partition sd card->remove all partitions and start from scratch.
2. For the first Ext partition, where you'll be keeping a good chunk of your OS, The consensus online is not to go above either 1.5GB or 2GB. I'm working fine with 2GB aka 2048MB.
3. You can skip the 2nd Ext partition.
4. The internet says Swap size should be 0.
5. Internet says File system should be ext4. This should do the partitioning, the rest of your SD card will still be great for storage as before.
7. Repartition internal memory using BlackRose:
1. I have never used BlackRose on Windows, but here goes: go here : http://forum.xda-developers.com/showthread.php?t=1270589 and download this zip archive: http://forum.xda-developers.com/attachment.php?attachmentid=1016437&d=1334971685; It has windows and linux files. The site also has a manual in case this walkthrough lets you down.
2. Unzip it into a folder in your platform-tools. Execute it with a ./ in linux or a .exe in win. It should say waiting for devices.
3. Reboot your phone manually. BlackRose should hijack the startup, install itself, and quit. Boot your phone up again.
4. Blackrose is rumored to have an interactive guide to partitioning, but it didn't work for me and at least some other genius on the internet, but being an industrious Austrian, he figured out the fix: Run Blackrose in Editor mode. Type resize as prompted.
5. The post here http://forum.xda-developers.com/showthread.php?t=2540366 on Evervolv KitKat implies that 250MB for System works with enough space for Gapps (Google does not allow their standard apps like Play Store to be included with Mod roms anymore, so you will need to install them from recovery too, but they distribute them bundled so it's not hard.), and some commenter said 260MB, but that didn't work for me long enough to run startup scripts and move some of it off. So I had to redo it and I went with 265MB for System and 10MB for Cache, which is working fine. Give it a name, I went with Kat.
6. BlackRose will shut down, but it will leave a golden turd in the form of a file called hboot_brcust.nb0 probably in the folder called “other.” That's what you want.
7. Put that file in the same folder as the Blackrose utilities fastboot-l and fastboot-w if it's not already there. Then boot your phone into fastboot again, via adb or manually. I think. Maybe try this from being standard booted up if the next part doesn't work.
8. Run # fastboot-l flash hboot hboot_brcust.nb0 . Windozers should use fastboot-w instead. Blackroot will wait for the device again.
9. Reboot your phone into the bootloader manually, by holding the trackball while powering up. The image should install on this boot, resizing your phone's internal memory partitions.
10. Run # fastboot -w. Your Bootloader should be loaded up, with the 1st line saying something about BlackRose and the 2nd line saying 265/10/161. This is how you know it worked. That 265 is where it's at for KitKat. Your main OS had been destroyed, but your Recovery ROM should still work.
8. Install Evervolv KitKat.
1. Go here http://evervolv.com/devices/passion and download the latest stable release. At press time that's the 4.0.0p4.2 version. Save it to platform-tools.
2. Reboot to Recovery from the menu in the BlackRose bootloader.
3. Do # adb devices. Then do # adb push ev_passion-4.0.0p4.2-perdo-squished.zip /sdcard/ . If it doesn't work, try using the touch recovery menu to toggle mount USB, then push, then unmount. Or mount USB, use the computer's file system to move the file to the root of the sd card, then unmount USB. Or try as root if you're using linux.
4. From the main recovery menu, select install zip from SD card → choose zip → select the ev_passion-4... zip. Wait up, it could take a while.
5. Success!! Right? Right. #adb kill-server, you can unplug now and won't need to plug back in! Reboot the phone, you're getting perilously close! This boot could take five plus minutes, or just one, but be patient.
9. Install Gapps.
1. You are such a lucky dog. Gapps bundled updates are available through the Evervolv toolbox. So you can get Play Store and everything else will come easy. Go to settings → wifi, turn it on, hook it up to your wifi router.
2. Back up to settings, and go Evervolv Toolbox → Updates and swipe over to the Gapps section. Tapp the most recent Gapps-kk zip. Tap the down arrow to download.
3. Reboot manually to recovery.
4. From the main recovery menu, select install zip from SD card → choose zip → select the gapps-kk... zip. This could also take a sec.
5. Reboot again! You're almost done! When it's all loaded up, Play Store should now be installed, as well as various google options that you can enable through the Evervolv settings.
10. Install Mounts2sd.
1. Go to the Play Store and get Mounts2sd.
2. Hit the top right corner for application settings. You'll need to install a startup script. Agree, give it permanent superuser status.
3. Reboot.
4. Go back into Mounts2sd, and go to the Tool menu (Wrench). Note that boxes aren't checked unless they're green-checked.
5. Enable the Cache to move cache partition to data or sd-ext. Storage threshold is up to you. Make sureApplications, Libraries, Data, and Media are all checked. Dalvik should stay unchecked, System apps can too.
6. Reboot again.
11. You're done!!! Or at least we're done. You still have to restore your apps and put all that music back on and figure out how to resync your contacts and... Good Luck.
12. If you want to get extra tricky, it's believed to be possible to leave app data on the real internal memory by default, and use Titanium Backup to move the data of most of your apps to the SD-ext, thereby leaving the data of your favorite apps on real internal memory. Use at your own risk.
ENJOY!!
Appendix 1:
Linux PATH env: I put all my android stuff in a file called androidy, so my path to my platform-tools was /androidy/adt/sdk/platform-tools, and my blackrose was in there too. So to set my PATH, I used: $ export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/sean/androidy/adt/sdk/platform-tools:/home/sean/androidy/adt/sdk/platform-tools/blackrose_120421/binary"
In order to make sure that while using it as root (as was necessary for some fastbot operations), I referenced the same PATH instead of the messed up root PATH, I used sudo env PATH = $PATH a few times.
Appendix 2:
The only actual bug I've noticed in a few days with this ROM is that my Chrome bookmarks don't add shortcuts to the homescreen when I tell them to from within Chrome. The widget-adder (longpress homescreen) has a bookmark option though, so if you bookmark it you can put it on the homescreen from there.
Huge Thanks to everyone involved with ClockworkMod, Cyanogen, 4Ext, BlackRose, and Evervolv!
Sources:
http://wiki.cyanogenmod.org/w/Install_CM_for_passion
http://nexusonehacks.net/nexus-one-...n-how-to-unlock-bootloader-on-your-nexus-one/
http://marian.schedenig.name/2012/07/22/installing-android-4-ics-on-the-google-nexus-one/
http://forum.xda-developers.com/showthread.php?t=2540366&page=24

Wooooh, Amazing book ! Everything is soo.... deep. In my opinion, tutorials should be only few lines.
Some mistakes :
Why installing CM7 and then backing up ? (You can install non market apps without CM7, and when flashing CM7 you erase all user data)
Why using m2sd if the rom has a built-in feature called a2sd ?
Why installing CWM then 4EXT recovery ? (TWRP is a touch one, and you can flash recovery once you have root access)
"You should have or buy an 8+MB, Class 10 SD card" ? typo ?
In my mind, big steps should be :
1) Backup SD, and SMS and Apps
2) Root
3) Install recovery (TWRP is advised by evervolv, but CWMRecovery is OK)
4) Partition SD
5) Install Blackrose (using 260mB system)
6) Flash ROM
7) Flash GAPS
8) A2SD Y N Y
Notes :
About SD-Ext size, i recommend reading this post from his creator : http://forum.xda-developers.com/showthread.php?t=1716124
A2SD is an old version of INT2EXT+
Using terminal is not friendly for beginners. Avoid it at maximum.
Provide a link for a MD5 sum checker.
I don't know if it works with actual stock rom, but when i rooted my n1, i used SuperOneClick. Plug, Click, Wait, Smile. (I still have it if needed)

ldFxl said:
In my opinion, tutorials should be only few lines.
Click to expand...
Click to collapse
This tutorial doesn't need to exist at all. All the information is available elsewhere on the internet, I did nothing original. Its only value is that it puts all the information in full detail in one place so you don't have to look in the forums for elaboration on each line of a more concise tutorial. Hopefully with info this detailed, someone with more chops than me could script it.
ldFxl said:
Why installing CM7 and then backing up ? (You can install non market apps without CM7, and when flashing CM7 you erase all user data)
Why using m2sd if the rom has a built-in feature called a2sd ?
Click to expand...
Click to collapse
I had already installed CM7 when I thought to write this, Marian (my 3rd source) seems pretty skilled as he is the only one who could make BlackRose work for me so I trusted his advice that it was the easiet procedure he found. Have you put TWRP Recovery on from stock after unlocking the bootloader (fastboot oem unlock)? And have you successfully repartitioned SD (fat32 &ext4) from TWRP? If so and you want to quickly write up the steps, I'd gladly replace my steps 3-6, that would save people a lot of time and doing.
ldFxl said:
Why installing CWM then 4EXT recovery ? (TWRP is a touch one, and you can flash recovery once you have root access)
Click to expand...
Click to collapse
4EXT is also touch, CWM cannot repartition SD. If you can go stock to TWRP this might be the best option. Or if not, stock to 4ext.
ldFxl said:
"You should have or buy an 8+MB, Class 10 SD card" ? typo ?
Click to expand...
Click to collapse
Yes! Thanks.
ldFxl said:
Using terminal is not friendly for beginners. Avoid it at maximum.
Click to expand...
Click to collapse
Don't you have to use terminal to use the built in A2SD? At any rate, it didn't work for me (I'm kind of a beginner), Mounts2SD's GUI seemed a little more beginner friendly. Also I certainly wouldn't have been able to make BlackRose work
ldFxl said:
Provide a link for a MD5 sum checker.
Click to expand...
Click to collapse
Good idea
ldFxl said:
I don't know if it works with actual stock rom, but when i rooted my n1, i used SuperOneClick. Plug, Click, Wait, Smile. (I still have it if needed)
Click to expand...
Click to collapse
I once used SuperOneClick on another phone, it looked like it struggled and finally worked with a DDoS style attack, it seemed simpler to just do it the way the manufacturer intended (if that's even a thing). But I suppose if it works with one click it really is simpler as seen by the user. Anyone have a report on whether it worked from stock N1?

Fituate said:
I had already installed CM7 when I thought to write this, Marian (my 3rd source) seems pretty skilled as he is the only one who could make BlackRose work for me so I trusted his advice that it was the easiet procedure he found. Have you put TWRP Recovery on from stock after unlocking the bootloader (fastboot oem unlock)? And have you successfully repartitioned SD (fat32 &ext4) from TWRP? If so and you want to quickly write up the steps, I'd gladly replace my steps 3-6, that would save people a lot of time and doing.
Click to expand...
Click to collapse
On my first flash, i was pretty beginner, so i followed a tutorial ; ) . And they used CWM. But flashing a recovery procedure from .img file doesn't differ with the recovery. TWRP allows you to partition SDCard. I did it last week (on HTC wildfire S, TWRP 2.6 as for N1).
Flashing step is the same -> just replace img file name. You can get it Here (From official TWRP Website)
Procedure from TWRP Website said:
Download the above file. Turn off your device. Turn on the device and keep holding volume down until a menu shows up. Select fasboot from the menu list. Plug the device into your computer. If you have the right drivers installed, your screen should now say FASTBOOT USB. Run the following command via the command line:
fastboot flash recovery recoveryfilename.img
Note that you will need to change the last part to match the name of the file that you just downloaded. This method requires that you have the drivers installed that come with the HTC Sync software that are available here. You will also need adb and fastboot for your computer.
Click to expand...
Click to collapse
6. Partition your SD Card
1. In recovery, Tap Advanced
2. Tap Partition SD Card
3. Set 2048 (MB max) on EXT Size and 0 on Swap Size
4. Tap EXT4 then swipe to start partitioning
Fituate said:
3. Reboot your phone manually. BlackRose should hijack the startup, install itself, and quit. Boot your phone up again.
Click to expand...
Click to collapse
Backrose is a custom Bootloader-> it replaces your HBoot/Fastboot
You don't need to reboot your phone to install blackrose. You just need your phone in ADB over USB, then the win setup will install blackrose.
Once done, run setup again, your phone will automaticaly go to HBoot, then choose 1, and 1 again.
Then enter "resize", "260" and "8".
In case that the installer don't work correctly, you can get flashable HBOOT from [Provide a nb0 (texasice recommend 260/8/168) AND MD5 Checksum]
While googling to find some infos (I don't remember me unlocking my bootloader) I found this guide : http://forum.xda-developers.com/wiki/HTC_Nexus_One/Flashing_Guide
Apperently SuperOneClick does not even need unlocked bootloader on 2.3.3 or previous ...
Isn't what we are trying to write down ?
There are many links pointing to this forum aswell.

How to Root Android 5.0 (LRX21O) for Nexus 5

Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
_______________________________________________________________________________
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...

Thank you for posting this. I tried three other methods to get root back before this, and none of them worked. This one did the trick without any problems at all. Thanks again!

Wug's Nexus Root Toolkit 1.9.4

kyoshiro22 said:
Wug's Nexus Root Toolkit 1.9.4
Click to expand...
Click to collapse
I know there's Toolkit's out there, but this is for those who choose to take the "Fastboot" approach.

gestevez1213 said:
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP[ - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Click to expand...
Click to collapse
This is NOT working.... I tried it 3 times on 2 devices

papayayoghurt said:
This is NOT working.... I tried it 3 times on 2 devices
Click to expand...
Click to collapse
What part are you stuck at?

For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.

I used chainfires auto root for the N5 (stock lollipop Boot loader). Worked great. Just download to a PC put phone into boot loader and run the bat file. I can't link but a quick google will find it for you.
Sent from my Nexus 5 using Tapatalk

andrelessa said:
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
Click to expand...
Click to collapse
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?

Personally, I'm using the autoroot from chainfire. Works like a charm, no custom recovery is needed (I have the stock recovery).

gestevez1213 said:
What part are you stuck at?
Click to expand...
Click to collapse
Everything is working, but then SuperSU can´t find a Binary.

gestevez1213 said:
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Click to expand...
Click to collapse
Yes, I read somewhere that TWRP need this...

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Are you running the official lollipop release? It should work with that. Delete the app, and try again.

Just put your phone in bootloader and run cf-autoroot from windows if you dont want twrp.

I have twrp but its not working like that

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Had the same issue and needed to flash the updated kernel from chainfire : https://www.androidfilehost.com/?fid=95747613655047375

Why are you trying to do this the hard way? Just use chainfire's autoroot.
It works perfect and it's literally one command
fastboot boot CHautoroot.img (or whatever the file name is)

cf-auto-root is the way
I agree, just use cf-auto-root. You should be good to go in no time.
Just for FYI, if you already have unlocked bootloader, it won't wipe your data, if you are concerned.
CF-auto-root roots N5 without modifying your kernel. I believe, if you flash the SuperSU in TWRP, it would modify the kernel. It's nothing bad, but if you want to remain "stock" and don't want to reflash stock ROM later to get the OTA, just use "Full unroot" from SuperSU app and you are stock and ready for next OTA.

I have encrypted the storage on my Nexus 5. Will CF-Auto-Root wipe my storage?

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
I have the same error.