So I recently picked up a Droid Bionic and get it working on Cricket. Everything was great until flashed to ICS. Now when I put it back and try to setup in qspt it gives me an NV SP Change error. In Cdma I try to write a nv file it says successful but at the bottom says unsuccessful so I dont know what the deal is with that. I am looking for some advice as this is current only phone and needed for work. Please help me asap and thanks for everything.
Now it gives NV slot cycle error. Any help really appreciate this. Thanks. Anyone on msn or im would be much help.
So got the phone for 611 to work and calls working now. However the only thing left is to get the 3G working on it as my next step. A lot of work to get it back up and working on ICS.
http://forum.xda-developers.com/showthread.php?p=22758211
I used RSD 5.7.. it got me back up and running.
:droid: Yep! :droid:
Related
Am pretty sure its nothing wrong with the perception ROM but I guess made a mistake somewhere while doing applying the ROM, now calls are not going through, modem is not working.
Wireless works.. can someone pls help me on how to get the modem/3gs working again..
I tried going to stock using ODIN, same issue there too.. Tried master clear, still issue.. what can be done now?
Phone is Sammy captivate/ATT/1008 model
SBcaptivate said:
Am pretty sure its nothing wrong with the perception ROM but I guess made a mistake somewhere while doing applying the ROM, now calls are not going through, modem is not working.
Wireless works.. can someone pls help me on how to get the modem/3gs working again..
I tried going to stock using ODIN, same issue there too.. Tried master clear, still issue.. what can be done now?
Phone is Sammy captivate/ATT/1008 model
Click to expand...
Click to collapse
unplug the usb cable, reboot the phone.
(fyi, 3gs is an iphone, you mean 3g)
Thanks for the quock reply. I tried restarting the phone but it still not working..
What can be done to get 3g working?
Hmmm... I'd recommend loading a different modem or a different ROM. However, I'm not sure if I understood you correctly... can you make calls while on the stock ROM? If not, I'd return it to AT&T for an exchange.
Not working in stock too.. Will go to att store. Not sure they exchange the phone, but lets try with sim.
SBcaptivate said:
Not working in stock too.. Will go to att store. Not sure they exchange the phone, but lets try with sim.
Click to expand...
Click to collapse
So you didn't have you sim card in did I read that correctly. If that is the case then yes you won't be able to do anything with the phone on the ATT network.
If that is not the case then yes I would look into returning it
I followed these steps and it worked fine now..
http://forum.xda-developers.com/showthread.php?t=838674
Luckily I remembered taking backup of files, even though i was not sure the use of them till I see above post ;-), I know am still learning..
Installed now Assonance, awesome ROM..
Thanks for helping me out..Appreciate..
Super boob. I rooted, installed clockwork mod. Made lots of changes and deleted lots of stock files (music widget hanging in my notification bar) I was working then I downloaded "atorrent" just to see if torrents were good for mobile. Now I have no data signal, will not download anything due to insufficient space. I did a factory reset and that was the wrong thing to do!! Got another phone coming tomorrow but I WILL figure a way to fix this! Help would be appreciated tho!!
Ok could you tell us what it does when you turn it on? Does it go into cwm? Does it go into download mode and any other info about whats rong with it now that you did a factory reset?
It boots normally and phone and txt msg work, also wiring works just fine. I am not sure if the atorrent download had anything to do with but its the only thing I did between total normal operation and what I have now.
Factory reset removed titanium and other root tools I had along with everything else. Still have superuser but not sure if still root as there is no way to know and cannot download anything directly. (Wifi, not wiring)
To clarify, It seems like I can download anything except market Apps. I have more more than enough room for files, it will let me dl asphalt 6 because I have to launch the game to do so. U Prolog know that's 300 MB. Plenty of space. Settings, about this phone, status, mobile network state = connecting.... been stuck there for 2 days. Called att and they said possible similar card error. It works just fine in the wife's phone. ( same also rooted)
have you tryed reflashing the kdz with lg flasher tool?
if you dont know how follow these steps.
http://forum.xda-developers.com/showthread.php?t=1491870
Not near a comp I can do that with but I will give a try either later tonight or tomorrow. Hope it works and I will post as soon as I do. Thanks a bundle!
Ya np if that dosent work might wanna talk to dark in the free assistance thread just below this one he knows more about this stuff then me.
the phone lost root. i cant get it to root again. "permission denied" i am getting new thrill tomorrow so i will root and be a bit more carefull. use this one as a practice phone. i really want to make it work. i will tinker with it and if i can get it rooted again i will try the above.
i really appreciate the help in any case!
You dont need root to flash a kdz its just tricking the program into thinking its an update.
ok so i got it fixed be flashing a new rom (cyanogen nightly) works faaassssttttttt!!!! only problem is i cant get market to work. unable to open connection to server error. lookin for a fix to that now. everything else is superb!! this forum is freakin awesome!!
whodisname said:
ok so i got it fixed be flashing a new rom (cyanogen nightly) works faaassssttttttt!!!! only problem is i cant get market to work. unable to open connection to server error. lookin for a fix to that now. everything else is superb!! this forum is freakin awesome!!
Click to expand...
Click to collapse
Did you install GAPPS?
Download GAPPS
no i didnt. i have about 5 hours of phone miod exp and i screwed up 3 phones and have none left on my insurance. i really dont want to screw up what i have. this has been like a $200 thing. worth it in my opinion tho!! maybe you could give me 1st grade instructions as if i brick another one i will have to go back to flip phones, per the wife!!!
shucks we all know i coulgnt help myself. did it!!! didnt increase my brick count at all!!!! damn this site rocks!! thanks a lot!
whodisname said:
shucks we all know i coulgnt help myself. did it!!! didnt increase my brick count at all!!!! damn this site rocks!! thanks a lot!
Click to expand...
Click to collapse
Just when I was about to post instructions too! Lol
try to chang gmail accont
Ok so if the answer to this question is already on this forum I searched for a hour and if you could drop me a link that would be great. Last night I flash v10k onto my LG thrill with no hiccups. The only problem is I want to go back to V20p because it changed to a O3D and all I can get is 2g edge service. So this morning I attempted to flash V20p and everything was kosher until it said there was a connection error. "Disconnect phone remove battery..." So i figured I needed to get the phone back into download mode in order to continue. The phone isnt bricked, however, I cant seem to get it back into Download mode to try again. Ive tried everything (that I can think of). Restarted my computer wipe all my phones data... My end goal is to have either v10e or the v20p. So I'm open to any routes to this end. I've read about doing a nandroid backup but all the links are dead. I've already decided I'm going to get the Galaxy Nexus and sell this phone if I can ever get it back to stock or semi stock. This is the second time I've had this connection error the first time it was during the update to GB and that time it bricked it. At the time I thought it was a faulty data cable, however, this time I was using a gold plated gigawire and it still did it... This coupled with the ghost call issue almost costing me my job(the reason for trying to go back to froyo) My experience has been buggy to say the least. Any help at all will be greatly appreciated.
PROlific666 said:
Ok so if the answer to this question is already on this forum I searched for a hour and if you could drop me a link that would be great. Last night I flash v10k onto my LG thrill with no hiccups. The only problem is I want to go back to V20p because it changed to a O3D and all I can get is 2g edge service. So this morning I attempted to flash V20p and everything was kosher until it said there was a connection error. "Disconnect phone remove battery..." So i figured I needed to get the phone back into download mode in order to continue. The phone isnt bricked, however, I cant seem to get it back into Download mode to try again. Ive tried everything (that I can think of). Restarted my computer wipe all my phones data... My end goal is to have either v10e or the v20p. So I'm open to any routes to this end. I've read about doing a nandroid backup but all the links are dead. I've already decided I'm going to get the Galaxy Nexus and sell this phone if I can ever get it back to stock or semi stock. This is the second time I've had this connection error the first time it was during the update to GB and that time it bricked it. At the time I thought it was a faulty data cable, however, this time I was using a gold plated gigawire and it still did it... This coupled with the ghost call issue almost costing me my job(the reason for trying to go back to froyo) My experience has been buggy to say the least. Any help at all will be greatly appreciated.
Click to expand...
Click to collapse
So you want V20P or V10E?
Sent from my Samsung Galaxy S II w/ DUAL BOOT: AOKP / MIUI
I really want V10e if its possible but If not then V20p will work.
I am having similar problems when I try as well. I have tried 5 or six times but tells me something about the b2c not loaded or a connection to the internet. Every time I hit "normal web upgrade test" it throws up a pop up and wont let me proceed any further. It has worked for me twice before, I got the no connection pop up and ignored it, but its not working this time. I set everything up the same from instructions on Acidhazzard rom web site. Please help...
I had to change the port back to 80 and put the orig host file back in the ect file just to download the bc2app then change it all back it worked the first time when i flashed v10k... idk i would delete the lg drivers and everything then start from scratch if i could boot into download mode.
Sent from my LG-P920 using Tapatalk 2
I have been starting...
From scratch. I download the LG flash package and go from there. It does it every time I try. The times I got it to work, I would just hit cancel or OK on the pop up and then hit the OK button I was wanting to hit real fast before the pop up could come back up. I thought it may be a Windows 7 issue (cause I have seen people talk about it) and tried win xp yesterday. Same things happened.
Im running Xp and Im having the same exact thing happen. I got it into download mode finally idk what was going on but now I just keep getting the communications error Ive tried the whole process (each one is like 5 errors) like 3 times now. If it keeps popping up before the update even starts then your probably need to change your small server port from 80 to 9002.
fixed
Somehow after getting the com error 100 times with the flash tool I noticed it had changed my model number back to P925 (I don't know how it did this) I then decided to chance it (after I changed the host file back and changed the port back to 80 and closed the small http server) I went through the LG support tool and clicked start update. After about 20 min of uncertainty during the update and another 5 minutes of self-loathing after getting a bootloop on the at&t screen... I did a hard reset and cleared all data and wah-la... I got it back to V20p. But the flash tool wouldn't flash the v20p for me.. So if I didnt somehow get rid of the P920 model number and back to the P925 model number I don't think it would have worked the way it did.
Ok, I have been beat or i thinking bout it too hard, or just not following directions. My stupid ass updated to 4.1.2 on droid bionic before ever gaining root acess. Trying to orginally root in order to use radiocomm to enable a att sim card in the verizon droid bionic. Well attempt after attempt led me to droid razr utility. trying to ap flashboot back with utility and now i can't get past please wait this may take a few minutes. Every other time able to get to screen where saying needs sim card to acess phone. As to where before read the sim just fine. Can't seem to get back to orginal 4.1.2 booting. actually cant get back to regular phone boot at all now...Help!!!
Follow this to try & get back to JB booting up...post when you got phone back...
http://forum.xda-developers.com/showpost.php?p=40370897&postcount=5
flashed 98.72.22 linux minimal root attempt hangup
MoodSwinger said:
Follow this to try & get back to JB booting up...post when you got phone back...
http://forum.xda-developers.com/showpost.php?p=40370897&postcount=5
Click to expand...
Click to collapse
I flashed 98.72.22 on it and this is screen shot of ( after many other failed methods) virtualbox running droid bionic root jb . ovf
so here is my linux minimal screenshot attempt. . noticed where it starting going wrong is
chmod: pwn: operation not permitted.
rooting phone...
phone may appear to.......
/system/bin/sh: /storage/rfs0/pwn: not found <-------Right here i noticed the file path on the phone and it's ---> storage/rfs1 Would that have something to do w/ it?
nothing ever vibrates and reboots in flash. got bad flash or something?
Root Bionic
I just used this guys root for my bionic it worked for me but had trouble with my friends. We are both running 4.1.2.
forums.androidcentral.com/bionic-rooting-roms-hacks/274272-easy-root-bionic-stock-4-1-2-jelly-bean.html#post2748804
thank you, right on the dot
b_dax said:
I just used this guys root for my bionic it worked for me but had trouble with my friends. We are both running 4.1.2.
forums.androidcentral.com/bionic-rooting-roms-hacks/274272-easy-root-bionic-stock-4-1-2-jelly-bean.html#post2748804
Click to expand...
Click to collapse
Thank you, that;s exactly what im doing and who I needed to talk to! appreciate your time homie!
trouble getting the att service logo or apn settings right!
ok so got radiocomm to do right, powercycled and then could never get the att or tmobile logo to appear. Also, when stuck in the att simi, it recognized the voicemail count on the sim correctly, but still said mobile network not available and when pulled down notification bar at bottom said no network. messed with the apn settings abit, Got it to make and receive calls while at my wifi connection. but the second it was out of range the service quit. tried setting with apn offline app.anyone can lead me to the right or wrong settings?
jellybean no rsd or radiocomm
Naughtybutbritt said:
Ok, I have been beat or i thinking bout it too hard, or just not following directions. My stupid ass updated to 4.1.2 on droid bionic before ever gaining root acess. Trying to orginally root in order to use radiocomm to enable a att sim card in the verizon droid bionic. Well attempt after attempt led me to droid razr utility. trying to ap flashboot back with utility and now i can't get past please wait this may take a few minutes. Every other time able to get to screen where saying needs sim card to acess phone. As to where before read the sim just fine. Can't seem to get back to orginal 4.1.2 booting. actually cant get back to regular phone boot at all now...Help!!!
Click to expand...
Click to collapse
same windows sees drives from the phone but RSD and RC dont see the phone while on JB any cure on how to set the phone or get the utils back Id flash to anything prior for an experiment who has the first JB release on SBF
Naughtybutbritt said:
Ok, I have been beat or i thinking bout it too hard, or just not following directions. My stupid ass updated to 4.1.2 on droid bionic before ever gaining root acess. Trying to orginally root in order to use radiocomm to enable a att sim card in the verizon droid bionic. Well attempt after attempt led me to droid razr utility. trying to ap flashboot back with utility and now i can't get past please wait this may take a few minutes. Every other time able to get to screen where saying needs sim card to acess phone. As to where before read the sim just fine. Can't seem to get back to orginal 4.1.2 booting. actually cant get back to regular phone boot at all now...Help!!!
Click to expand...
Click to collapse
I pressed restart on radiocomm while trying to flash my droid bionic on jelly bean since i'm an idiot...
Now it says "Encryption Unsuccessful"... Phone still works though...
Hello, I have searched for a solution and found some that worked, My WIFI on my moto x will not connect to any network.
it just started a few weeks ago, But going to in to recovery mode and wiping the cache was working it would connect again.
Thing is it's not only on my home network if i go to any place with WIFI it shows the network, I try to connect and it disappears.
I had the kitkat update I tried to factory reset that did not work also reflashed to jelly bean to see if that would fix the problem. I did not restore any back ups of my device since it could have been a corrupt setting or file that was messing it up. Still no luck I tried some of the router options found on the web about changing the channels. Just to be clear it will not connect to any WIFI not just the one at my house.
I spoke with Fido tech support and after explaining everything i tried they said i was out of options and since I bought the phone right out, I would have to call Motorola and see if they can fix it, thing is i unlocked the bootloader when I rooted it when i first had it with it's stock jelly bean.
I know this is a on going issue for many other moto x, could it just be a hardware issue now my phone has been in a otter box defender since the day i bought it, it has no damage or ever been dropped in water.
it's frustrating, my data works perfect and every thing else on phone works great. I really like the phone but since the bootloader is unlocked the warranty is now void and I only had the phone since dec 2013.
does any one have any last options I could possibly try thanks in advance.
xsnyper said:
Hello, I have searched for a solution and found some that worked, My WIFI on my moto x will not connect to any network.
it just started a few weeks ago, But going to in to recovery mode and wiping the cache was working it would connect again.
Thing is it's not only on my home network if i go to any place with WIFI it shows the network, I try to connect and it disappears.
I had the kitkat update I tried to factory reset that did not work also reflashed to jelly bean to see if that would fix the problem. I did not restore any back ups of my device since it could have been a corrupt setting or file that was messing it up. Still no luck I tried some of the router options found on the web about changing the channels. Just to be clear it will not connect to any WIFI not just the one at my house.
I spoke with Fido tech support and after explaining everything i tried they said i was out of options and since I bought the phone right out, I would have to call Motorola and see if they can fix it, thing is i unlocked the bootloader when I rooted it when i first had it with it's stock jelly bean.
I know this is a on going issue for many other moto x, could it just be a hardware issue now my phone has been in a otter box defender since the day i bought it, it has no damage or ever been dropped in water.
it's frustrating, my data works perfect and every thing else on phone works great. I really like the phone but since the bootloader is unlocked the warranty is now void and I only had the phone since dec 2013.
does any one have any last options I could possibly try thanks in advance.
Click to expand...
Click to collapse
Hi,
I suggest you do a full SBF restore. Don't confuse this with a factory reset....SBFing can actually repair a corrupted filesystem, while a factory reset does not.
You can find a great guide here:
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
There are 2 methods. RSD Lite and manual method. Either will work, but pay very close attention to the instructions.
You will find the SBF file for your particular carrier/version here:
http://sbf.droid-developers.org/phone.php?device=0
Good Luck
P.S. I too was having strange WIFI issues. The SBF back to stock fixed it 100%. Hope it works for you.
no luck
samwathegreat said:
Hi,
I suggest you do a full SBF restore. Don't confuse this with a factory reset....SBFing can actually repair a corrupted filesystem, while a factory reset does not.
You can find a great guide here:
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
There are 2 methods. RSD Lite and manual method. Either will work, but pay very close attention to the instructions.
You will find the SBF file for your particular carrier/version here:
http://sbf.droid-developers.org/phone.php?device=0
Good Luck
P.S. I too was having strange WIFI issues. The SBF back to stock fixed it 100%. Hope it works for you.
Click to expand...
Click to collapse
I followed the guide step by step, Still no luck.
shows the wifi connections, saves them and shows that it is connecting and just goes back to saved, or disabled. Sometimes even just disappears took it in to have it looked at and the guys at the fido store had the same issue trying to connect to their network.
They keep saying it is a software issue but i'm starting to think it might be hardware. I even tried some fixes with Root to get access to the persist folder to change a file. Tried booting in safe mode to see if it would connect and just does the same thing, I might just be buying a new device just got one of those unlucky ones thanks again tho.
xsnyper said:
I followed the guide step by step, Still no luck.
shows the wifi connections, saves them and shows that it is connecting and just goes back to saved, or disabled. Sometimes even just disappears took it in to have it looked at and the guys at the fido store had the same issue trying to connect to their network.
They keep saying it is a software issue but i'm starting to think it might be hardware. I even tried some fixes with Root to get access to the persist folder to change a file. Tried booting in safe mode to see if it would connect and just does the same thing, I might just be buying a new device just got one of those unlucky ones thanks again tho.
Click to expand...
Click to collapse
I would suspect a hardware issue since you have doctored your persist partition, and you have restored the others via SBF. Bummer :/ Maybe someone else will have another suggestion for you.
Good Luck
Thank you
Thank you Very Much
Working again!
I did not give up and it's working again thanks to samwathegreat, I dont mean to bump my old post but I just want to share with other xt 1058 users that may have been having this issue.
I had mentioned before I used some one else's persist files to try and fix mine and thought it was a hardware problem, Well turns out it was not.
I used the files samwathegreat posted in this post
http://forum.xda-developers.com/showpost.php?p=54089540&postcount=7
I also made a back up of mine, the files in that folder are for a xt 1060 but corrected my problem now I can connect every where again including my house and any other place that offer WIFI.
I was not able to send it to Motorala since I had unlocked the boot loader and warranty was void. All I could do was wait, I even flashed a tmobile 4.4.3 to see if that would fix it with no luck. Any ways just want to say thanks again samwathegreat!!! :good::good:
xsnyper said:
I did not give up and it's working again thanks to samwathegreat, I dont mean to bump my old post but I just want to share with other xt 1058 users that may have been having this issue.
Click to expand...
Click to collapse
Congrats bud!!! Don't worry about the files being from an XT1060 - they are the same on all Moto X variants.
Glad to hear it is all sorted out!!! Enjoy.