Related
I came across the following charging stand for the HTC Flyer. What do you think? Would this work with our Nook Colors?
http://cgi.ebay.com/USB-Base-Dock-C...ccessories&hash=item3f0be99c32#ht_2900wt_1375
Well, it might connect but won't give you the fast charging ability of the stock nook cable (which has additional connections for the 3-4 hour rapid charge). Provided that you connected to a 2 amp source, you might get a charge after 8 hours or so, and if you had a 1 amp charge, _IF_ your screen was off perhaps after another few hours (12?).
Phatdawg said:
Well, it might connect but won't give you the fast charging ability of the stock nook cable (which has additional connections for the 3-4 hour rapid charge). Provided that you connected to a 2 amp source, you might get a charge after 8 hours or so, and if you had a 1 amp charge, _IF_ your screen was off perhaps after another few hours (12?).
Click to expand...
Click to collapse
This might actually have fast charge, thank to it being for the Flyer and all. I think this stand would work, but I have no idea how far that micro usb comes up from the bottom. Hate to have you set your Nook down and break it off or something.
Well I took a chance and ordered one from some store in Hong Kong. Will be here in a few weeks and will let you know if it works out!
igolfchip said:
Well I took a chance and ordered one from some store in Hong Kong. Will be here in a few weeks and will let you know if it works out!
Click to expand...
Click to collapse
THat does look really nice. If it works out igolfchip, please let us know!
Nburnes said:
This might actually have fast charge, thank to it being for the Flyer and all. I think this stand would work, but I have no idea how far that micro usb comes up from the bottom. Hate to have you set your Nook down and break it off or something.
Click to expand...
Click to collapse
Well, just to give you some idea of my tests.
Stock charger + cable = 3-4 hours
Stock cable + 3rd party 2amp brick = 7-8 hours.
From that picture it looks like a universal mini usb attachment. I doubt it will give the 3-4 hour charge. It probably will be a 2amp source though.
Phatdawg said:
Well, just to give you some idea of my tests.
Stock charger + cable = 3-4 hours
Stock cable + 3rd party 2amp brick = 7-8 hours.
From that picture it looks like a universal mini usb attachment. I doubt it will give the 3-4 hour charge. It probably will be a 2amp source though.
Click to expand...
Click to collapse
Maybe combine it with this: http://cgi.ebay.com/Barnes-Noble-Nook-Color-filter-plug-USB-charger-/190521989603#ht_3030wt_1163
I haven't tried it, but it would be quite nice if it work.
That might work, I don't know of anyone who's willing to try it out for 7 bux tho.
Phatdawg said:
That might work, I don't know of anyone who's willing to try it out for 7 bux tho.
Click to expand...
Click to collapse
This guy did: http://forum.xda-developers.com/showpost.php?p=13730222&postcount=32 but didn't comment on his/her experience.
That would still mean you need the proprietary cable tho, and that's what keeps on breaking.
I wish a cheap 3rd party manufacturer would pick this item up...I wonder if monoprice would consider making them, or if they are protected by patent and unable to be reproduced because of it.
Phatdawg said:
That would still mean you need the proprietary cable tho, and that's what keeps on breaking.
I wish a cheap 3rd party manufacturer would pick this item up...I wonder if monoprice would consider making them, or if they are protected by patent and unable to be reproduced because of it.
Click to expand...
Click to collapse
Yeah I know what you mean. Just had to call for a replacement today myself.
Probably is a patent issue, but that doesn't stop many manufacturers in China from making cables for Apple products, so I'm sure it's just a matter of time.
EDIT: Not to go too off topic here but I found these three on eBay, all of which state fast charging. Anyone tried them?
http://cgi.ebay.com/2x-Home-AC-Char...Accessories&hash=item4840fd2d20#ht_1417wt_905
http://cgi.ebay.com/Barnes-and-NooK...ccessories&hash=item20bb08ebc0#ht_2022wt_1139
http://cgi.ebay.com/USB-Home-Wall-A...ccessories&hash=item1c1d5bed4a#ht_4300wt_1727
Phatdawg said:
Well, it might connect but won't give you the fast charging ability of the stock nook cable (which has additional connections for the 3-4 hour rapid charge). Provided that you connected to a 2 amp source, you might get a charge after 8 hours or so, and if you had a 1 amp charge, _IF_ your screen was off perhaps after another few hours (12?).
Click to expand...
Click to collapse
So, I tend to charge my devices overnight, so 2 hours or 6-8 hours really doesn't usually matter to me.
I see this dock as being a neat way to use the device at my desk (twitter feed, play music, etc...) as well as a stand to charge with.
Some folks have mentioned that standard MicroSD's don't charge the nook. I have used many different charging cables for my Samsung Captivate and found that the nook charges (and never complained about the time to charge).
Also, I checked out the Flyer at my local Best Buy store. The Flyer has a proprietary connector that is a modified MicroUSB connector. However, a standard MicroUSB also works. Looking at this item, seems that the stand from HK uses standard MicroUSB.
I'm guessing that the biggest issue I could come up with is 'fit' of the nook in this stand. Specifically, do I need to modify the stand so the back of the nook sits flush against the stand and doesn't put too much stress on the USB connector (assuming there's some space between the nook and the stand).
Any update on this?
Sent from my Droid using XDA Premium App
Just got it in the mail - I'd rate it an 8 out of 10.
Will post pics soon, but first impressions:
- Looks really good, blue indicator light when connected / Charging
- Hard to first figure out alignment, then it gets easy
- Fit:
- A little extra room between the back and the stand, not much wobble. Could always use tape or something to close the gap
- A little wiggle between the bottom edge and the stand. Again, some kind of black padded tape would easily resolve and look good. Not sure if I will event attempt as not a hassle yet
No idea on charging times, never been an issue for me as I'll use this:
1) At my desk (put a twitter feed or music on)
2) Overnight charging (3 hours or 6 hours don't really matter to me)
Again, pics to come soon!
Thanks keep us posted.
Does it hold the nook in landscape? I know it wont charge, but curious to know if its capable with the micro USB being there. Maybe add a pic with it in landscape as well.
Thanks
Sent from my Droid using XDA Premium App
Landscape is not advised.... If you can balance the device on there, will scratch up your nook.
Sounds like a good option. Can't wait fto see those pics.
That's excellent news. Can't wait to see the pictures. If you can get an estimated charge time as well, that would be excellent.
Sent from my NOOKcolor using XDA App
I'm excited to see some pictures whenever they get posted, this looks like a good deal.
Add me to the list of those eager for pictures...
If you're impatient like me, here's a DIY $13 mod I did to make the extended battery wireless charging enabled. Presumably works on all charging mats as the whole idea behind Qi is a universal standard.
http://uselesspuzzles.blogspot.com/2011/09/droid-bionic-optimizations-extended-bat.html
Photos and videos at the bottom of the post.
Here's the main video:
http://www.youtube.com/watch?v=nR7egtQl-Zg
I moved the coil a little bit so the connection was more secure after the video. Works without issue.
I bought like 5 touchstones so I can have one in my home office, office office, bedroom, living room, etc.
Do you know if the touchstone works with the VZW inductive charging back for the standard battery?
slvrdrgn123 said:
Do you know if the touchstone works with the VZW inductive charging back for the standard battery?
Click to expand...
Click to collapse
honestly i havent really read into the different technologies used... so no idea
my guess is if it did work it would probably not be as good an experience as the magnets are probably not placed in the same alignment (so the phone won't know exactly where to attach giving a sub-optimal placement)
Wow
Looks pretty nice, I happened to have the soldering supplies and wire might do this myself. How is the charging time as I can't find the output for the touchstones anywhere. Would you still recommend it after having it for a while now?
nah don't do it
it has to be perfectly aligned to charge properly- from what i've read the real bionic backplate works even through cases-
i'd say wait for a better version that is less finicky
or make one with the bionic reg. battery wireless charging door like i plan to
Triskite said:
it has to be perfectly aligned to charge properly- from what i've read the real bionic backplate works even through cases-
i'd say wait for a better version that is less finicky
or make one with the bionic reg. battery wireless charging door like i plan to
Click to expand...
Click to collapse
I'd like that. I tried my bionic with the inductive charging door on the touchstone, and I couldn't get it to work, so this mod would be great. I hate the LG charging mat for the bionic
Do you know if this was a tight squeeze in the extended battery door? Also, does this mean you cannot take the door off anymore?
Hey guys, i know older post...has anyone done this with the reg battery?
If so, what kind of chargign times are u getting? ALso, are u usign the Palm mat or some other mat.
My intention is to use this with teh standard battery, and battery cover, so i can still use gel case
i'm still waiting for the long promised true wireless charging where the same towers that supply us our signal also charge our phones.
it's barbaric that we're still having to plug in somewhere to charge. what century is this anyway !!?!?
voxigenboy said:
i'm still waiting for the long promised true wireless charging where the same towers that supply us our signal also charge our phones.
it's barbaric that we're still having to plug in somewhere to charge. what century is this anyway !!?!?
Click to expand...
Click to collapse
Specially since Tesla had this idea a longgggg time ago. Sure would be nice...
Very nice
Sent from my DROID BIONIC using XDA App
I did this using the stock charging cover for the bionic.
It works perfect but you need a Qi compatible pad. After searching I found one on ebay for 35 bucks. The only problem is it makes removing the battery difficult. My next project is to see if I can make the mod so it works just like the production cover.
Hi Guys,
Anyone tried Solar Powered Battery Chargers?
Looking at this one here :
source : 6000 mAh Solar Powered Mobile Power Extended Emergency Battery - Obostore
I'm looking fior the same. I bought recantly GOAL ZERO Nomad -7. Instead of charging it drains the power of my Note-2. I guess it is because of the non-standard pin-out (11 pins), so this is the one I would definitely not recommend.
Arthur
SINGAPOREAN said:
Hi Guys,
Anyone tried Solar Powered Battery Chargers?
Looking at this one here :
source : 6000 mAh Solar Powered Mobile Power Extended Emergency Battery - Obostore
Click to expand...
Click to collapse
I haven't seen any positive reviews about any solar powered chargers. The problem is that you need to apply voltage (bias it) in order for it to work. Like those solar power panels on the roof of people - if you loose a power to the house, they will not work So they might be draining instead of charging lol!!!
Don't know for sure how it works and if it works and how efficiently. So if anybody has any real life experience, please chime in. Most of the big name external battery vendors don't want to carry this product. I only seen it on ebay and Aliexpress.
I personally haven't tried one. From what I've seen about them, they're very fast, and can be nick-picky about the angle to the sun. On top of it, you'll probably need to check what's the output versus what the phone needs to change.
I think you're probably better off finding some kind of crank mechanism and use that to change the phone. Plus, you'll get a little work out too; you'll live longer to enjoy your phone, 8)
I have a voltaic that I use when camping or on extended hikes. It comes with a 3000mah battery. I haven't used it on the Note2 yet, but used it a lot with my Fascinate. The battery works fine as backup power, though it charges slowly and the phone pretty much has to be off for it to be effective. It takes most of a day of full sun to recharge the contained battery. It's ok if you're going to be away from power for a week, but for less than that I think just an extra battery or two fully charged would work better.
I think we just need to find or build one that supports 2.1 amps (ideally) but anything over 1amp should do something.
willfck4beer said:
I think we just need to find or build one that supports 2.1 amps (ideally) but anything over 1amp should do something.
Click to expand...
Click to collapse
I have one I found at Best Buy a couple years ago. It's a single amp box, so charges my Note II very slowly. I've used it on my bike when I'm out on rides. I have a mount for it and my phone. While riding, I use bluetooth headphones. It does work, but like someone else said, there needs to be one with 2.1 amps.
I as well have a Nomad 7, but mine charges my note without issue, although I will admit, it is impractically slow.
I bought this couple of months ago, charging the phone is a wii bit slow but it works like a champ!
http://www.ebay.com/itm/Opteka-4000...iPad-iPod-Android-Phone-Charger-/370665663271
I wouldn't mind if the solar power was a "backup" to a regular external battery, but if all it did was solar I wouldn't be interested.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
WICKED... just stumbled across this on ebay. If you are a roll your own DIY type and want to charge a rapid charge device like Note2 or a tablet or something, this might be a great thing to look at.
http://www.ebay.com/itm/DC-DC-5V-36...018?pt=LH_DefaultDomain_0&hash=item2c700c47c2
I, personally, don't like the mini-usb connector... seems kind of goofy. I'd prefer just two wire terminals to connect solar panels to.
But yeah, if you've got high voltage solar setup... e.g. anything between 5V and 36V and want to have a clean, regulated 5V usb compliant output, this would likely be your guy. I'd also want to make sure it really does work with note2 - in terms of negotiation of currents higher than 100ma. YMMV FWIW
AND if you don't need note2/tablet 2A...
this guy seems like about the right fit.
http://www.ebay.com/itm/DC-DC-12V-2...965?pt=LH_DefaultDomain_0&hash=item4d0c738c65
Here goes.....
I've been struggling with charging this phone. I have both the Sprint and the T-Mobile versions and I'm seeing the exact same thing with both. This phone simply won't pull more than roughly 600ma from a charger. With the best of equipment (chargers, cables, clean regulated power, etc etc) a ~600ma (+/- 15ma) is all I ever see at max draw.
I've tried all sorts of chargers including several stock. Same for cables. I know some cables are crappier than others and can restrict current....those that I found did that were tossed in the trash (don't want to keep the fubar cables anyway).
The phones have been in various states of operation too....from one extreme to the other....under heavy benchmark load to "first run" state from a complete reset (full wipe) with airplane mode on.
I said I have a "problem" above. What I mean is that my use-case is such that I use navigation with bluetooth streaming for podcast listening during my commute to and from work everyday. While I'm at work I plug into my TV to playback video podcasts via MHL. At best.....BEST....I can maintain my current state of battery. In other words, if I'm 39%, it'll stay thereabout when I'm plugged into a charger in either case.
No..."Power Saver" doesn't help. What I think would actually help is if power saver had the ability to disable some cores in addition to just governing to 1.1Ghz across all four.
To have a kickass phone that you really honestly can't truly kick ass with feels weird. This thing simply discharges faster than it can charge under any real world load. Maybe my personal use case is unconventional but I feel like it's not THAT unconventional seeing as that the features I use wouldn't be built in if no one ever used them, ya know?
I first noticed this behavior with my previous phone, the EVO 4G LTE. Even though the behavior was there, it wasn't as bad or noticeable due to what I think is the fact it was only dual core...maybe other factors too. But I'm not a developer/engineer so my observations are only from the outside looking in.
I know I can "tweak" my behaviors -- "...do this, or do that. Disable this, or disable that." I understand these things. But having to disable a bunch of things sorta goes against the idea of having this device in the first place.
At the end of day, my observations are my own and I know some are going to suggest I'm "holding it wrong" or whatever, but you guys gotta admit there's something up here with the very limited charge rate.
All that said, I still enjoy the phone. :angel:
PS - I've been using this to monitor current/voltage. The tool has been verified to be working properly by two EE's at my work.
http://www.amazon.com/Micro-SATA-Cables-Voltage-Current/dp/B005Z1E3IY
The stock charger. How much does that one show it pulls?
Because I have a 1a charger for my car and I can have the screen on the entire time and it charges, slower, but it charges.
Felnarion said:
The stock charger. How much does that one show it pulls?
Because I have a 1a charger for my car and I can have the screen on the entire time and it charges, slower, but it charges.
Click to expand...
Click to collapse
Same same.....doesn't matter the charger capability. Peak draw at any one time seems to be roughly 600ma...+/-. As the charge of the phone gets closer to full, the rate tapers off to roughly 200ma and then to about 80ma as it gets really really close.
I know HTC is trying to protect the battery, but I really get the feeling that this is way over-protective.
I took a picture with my Sprint ONE of my T-Mobile ONE on a 2.1amp wall charger. Notice, at roughly 1/2 charge, it's only pulling about 600ma. Too daggon slow in my opinion.
dougxd said:
Same same.....doesn't matter the charger capability. Peak draw at any one time seems to be roughly 600ma...+/-. As the charge of the phone gets closer to full, the rate tapers off to roughly 200ma and then to about 80ma as it gets really really close.
I know HTC is trying to protect the battery, but I really get the feeling that this is way over-protective.
I took a picture with my Sprint ONE of my T-Mobile ONE on a 2.1amp wall charger. Notice, at roughly 1/2 charge, it's only pulling about 600ma. Too daggon slow in my opinion.
Click to expand...
Click to collapse
I assume you mean a 2.1a charger from a Samsung product, that won't work. Samsung uses some signaling on the D+/D- wires to show "This is a Samsung product, charge at 2.1a"
HTC One does not have the ability to offer this signaling and thus will charge at usb rates of 500-600.
Some products short the data wires of the USB to signal that it can supply extra power. This is the type of signaling the HTC One can use. You would need a charger with this capability.
If you don't mind, if you could take a picture of the same setup with the stock charger, that would help.
EDIT: This particular device you've linked seems to block any signaling, according to the reviews on Amazon. I think your problem may lie there.
Felnarion said:
I assume you mean a 2.1a charger from a Samsung product, that won't work. Samsung uses some signaling on the D+/D- wires to show "This is a Samsung product, charge at 2.1a"
HTC One does not have the ability to offer this signaling and thus will charge at usb rates of 500-600.
Some products short the data wires of the USB to signal that it can supply extra power. This is the type of signaling the HTC One can use. You would need a charger with this capability.
If you don't mind, if you could take a picture of the same setup with the stock charger, that would help.
Click to expand...
Click to collapse
I understand what you mean. Note that in all my rambling on about various cables and chargers, if I wasn't explicit, I was implicit in that I've tried HTC stock gear too. Same results, no matter.
I do own and did try a few Samsung chargers and cables in addition to the myriad of others. I'm aware of Samsung's irritating attempts to lock people into using their accessories, thus the signaling modifications, but wanted to try them anyway. That's why I used a whole bunch of different chargers and cables. Some are not-so-good and others are great. The one charger I prefer is from VENTEV. It's a dual-port 4.2amp (2.1/per) wallwart.
http://www.amazon.com/Ventev-Wall-Charger-Dual-2-1A/dp/B00BEJSRDI
What I'm saying overall is that the big picture here suggests that we can't pull more than the peak 600ma or so charge rate, no matter what combination of doo-dads you toss at the phone. I'm all in if HTC has some super-secret special vapor rub one can use to charge faster, but even the stock charger they give us in the box which supports 1AMP doesn't deliver that since the phone itself doesn't pull more than what I've seen.
In the attached pics, the one of the charger is the Ventev. The other three show my T-mobile ONE just hit 90% charge and the rate has dipped to about 400ma on average. I took three snaps to show that it does fluctuate a bit. It'll ramp down more at about 95% or so and even more at 99%...................ALL of which is to be expected, I know.
To be clear, at this point, and what you see in these pics, is the stock HTC wall charger that we all get in the box with the phone, the stock HTC microUSB cable, and the measuring tool that is plugged into charger which the cable is then plugged into to then charge the phone. The meter can handle just over 2amps before it pops the internal fuse.
-Doug, KG3EK
dougxd said:
I understand what you mean. Note that in all my rambling on about various cables and chargers, if I wasn't explicit, I was implicit in that I've tried HTC stock gear too. Same results, no matter.
I do own and did try a few Samsung chargers and cables in addition to the myriad of others. I'm aware of Samsung's irritating attempts to lock people into using their accessories, thus the signaling modifications, but wanted to try them anyway. That's why I used a whole bunch of different chargers and cables. Some are not-so-good and others are great. The one charger I prefer is from VENTEV. It's a dual-port 4.2amp (2.1/per) wallwart.
http://www.amazon.com/Ventev-Wall-Charger-Dual-2-1A/dp/B00BEJSRDI
What I'm saying overall is that the big picture here suggests that we can't pull more than the peak 600ma or so charge rate, no matter what combination of doo-dads you toss at the phone. I'm all in if HTC has some super-secret special vapor rub one can use to charge faster, but even the stock charger they give us in the box which supports 1AMP doesn't deliver that since the phone itself doesn't pull more than what I've seen.
In the attached pics, the one of the charger is the Ventev. The other three show my T-mobile ONE just hit 90% charge and the rate has dipped to about 400ma on average. I took three snaps to show that it does fluctuate a bit. It'll ramp down more at about 95% or so and even more at 99%...................ALL of which is to be expected, I know.
To be clear, at this point, and what you see in these pics, is the stock HTC wall charger that we all get in the box with the phone, the stock HTC microUSB cable, and the measuring tool that is plugged into charger which the cable is then plugged into to then charge the phone. The meter can handle just over 2amps before it pops the internal fuse.
-Doug, KG3EK
Click to expand...
Click to collapse
I was directed here from another section of the forum. Have you tried using this?
https://play.google.com/store/apps/details?id=ccc71.bmw
With the stock charger it's telling me that I'm pulling in just under 950mA during peak charging and tapering off as it gets full.
i used a samsung 0,7C charger and it charges at a conntat +800 mah
the HTC chargers also sometime speaks a 900mah + but typically aroung 200 - 700 mah +
it seesm t fluctuate more often than the samsung which fluctuates to a lwoer range when bnearing 100% charge.
Dude, I have the same problem with my EVO LTE, exactly as you describe it, but for some weird reason, my car charger charges my phone normally while other chargers will take several hours to fully charge. I really hope it's a problem with the chargers and not our phones :thumbup: :thumbdown:
Sent from my EVO
Hi. So based on what people have posted, does this mean that there isn't much difference charging it from the wall socket and from a usb port in a computer? Since then charging rate is around 700-600mah and a usb charges at around 500mah
Sent from my HTC One using Tapatalk 4 Beta
http://androidcommunity.com/htc-one-doesnt-support-qualcomm-quick-charge-20130509/
So I download that app, and no matter what I do with my settings, I cannot get my phone to charger faster than about 550mAh. I am currently running at 384MHz CPU, 200MHz GPU, and Force Charge (On/Off), and 50mV undervolt. With the phone just laying there (screen on 65% battery), as I stare it currently saying +529mA (+23.00% /h).
I just tried playing a game, with those same exact settings and it stated charging at +217mah.
Edit: Was redirected here and didn't notice it was an old topic. sorry for reviving?
I kinda want to get a Qi charger, but I'm not sure whether I should go for the official Samsung one, or a cheaper one from a different brand. Is there anything special about the Samsung one?
No, nothing special, only the design.
Ah okay, good to know. I'll just get a different one then. Don't want to spend 30eu more just for design
Nothing special i have the older model and another brand model both work great
I Had an Aukey wireless charger and got a Samsung one free with my S6 and charging time is a bit different. I tested both chargers with the 0% to 100% charge time and the Aukey gave me 3h25 and the Samsung charger 2h55 minutes. There is a slight difference, also the Samsung has a LED strip around that changes color when charge is complete and since its larger, I don't have to move the phone around to get a signal...I found myself adjusting the phone a bit with the Aukey because the phone kept giving a connect/disconnect sound