Database Develop

[Q] [HELP] CPU Only 600Mhz

I have only 600Mhz.
I cant overclock only underclock, even with OC-Kernel.
The problem is on Stock Firmware 2.3.3 and Costoum Roms.
Is there a Hardware-Bug or what else?

Not all chips are made to the same quality. They only have to reach a certain clock speed to pass quality checks. Certain devices can be overclocked due to being of higher quality.
Sent from my HTC Desire S using XDA App

Yes but the default clock of the ACE is 800Mhz right? But MY default clock is 600Mhz.
I dont have any options to overclock only from 124Mhz - 600Mhz.
The default clock of 800Mhz would be ok for me..

You sure its a ace? Galaxy fit / mini & 551 / europa are 600mhz MSM7227 vs 800mhz MSM7227-t 800mhz galaxy gio / ace.

Yes! Its definitely a ACE i have the Samsung box here .. and there are a big label Galaxy ACE "800Mhz CPU"

Which rom are you using? Did you have the same problem on stock rom?

Do you have setcpu, if you do go on Info ; CPU what does it say ; Cpu Part / Cpu Revision / Hardware / Revision ?

If problem presist then go to Samsung service centre and change your phone dude
Sent from my GT-S5830 using xda premium

GerasVille said:
Which rom are you using? Did you have the same problem on stock rom?
Click to expand...
Click to collapse
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots

Cr0nFixXx! said:
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Click to expand...
Click to collapse
Hi @Cr0nFixXx!...
It would seem to me that your problem is your Kernel... The details in your first thumbnail show the kernel to be that of a different dev to @Ketut...!!! Your OC Kernel details should read as this : 2.6.35.7-perf-CL562111 [email protected]#4
The frequencies of the Cpu are governed solely by the kernel, so this is without a doubt your limiting factor...
The below kernel is tried & tested by thousands of users & is stable under OC...(check my sig for details)...
You can download this kernel from my dropbox here : http://dl.dropbox.com/u/44779766/cm-7.1-oc-kernel-2.6.35.7-perf-CL562111.zip
Flash this kernel from CWM recovery... Reboot phone, go to cyanogen setting/Performance & you should get the full cpu range for OC...
To see stable max OC set governor to "Performance"... Remember, only increase cpu frequency a little at a time & test for stability before increasing further...
Only when you have found your max stable clock speed can you tick "set on boot"...
FYI : OC kernels can only be used with custom roms... They will not work with stock roms... @Ketut's OC kernel will only work with CM7.1 / 7.2 Roms... Do not try with any other rom...
Stay Breezy n Be Lucky...
Pe"ACE"...

Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock

Cr0nFixXx! said:
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Click to expand...
Click to collapse
Hey Dude...
This is a very strange problem indeed... The Armv6 cpu is standard 600mhz cpu but samsung factory OC it when it is used in our aces... so we end up with an end-user frequency of 806mhz... Yours won't even reach that out of the box...?
Do me a favour... Flash this rom here : http://dl.dropbox.com/u/44779766/IceCreamSundayFinal_Tweaked.zip
It is IceCreamSunday Final by @Jusada... It is considered the fastest & most stable rom available on XDA & the OC kernel is inclusive of the rom...
Once flashed, go to cyanogenmod settings, performance, cpu & tell me what frequencies you get offered...?
FYI : It doesn't matter what your baseband or firmware version is... Ensure that you are using CWM 5 to flash with... Also ensure that before flashing you do a full system, cache, data, Dalvik wipe to ensure a clean flash... This rom is 7.2 btw...
Stay Breezy n Be Lucky...
Pe"ACE"...

I dont know whats my phones problem but it dont worked for me -.- even max. 600Mhz...
But great thanks for your help!

LoL the first thing that entered my mind is "maybe samsung forgot to overclock" my suggestion is go to samsung and tell them to overclock that.. or simply say it's defective

approach samsung and get new phone..

man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having

LazySam said:
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
Click to expand...
Click to collapse
but he should get 800 which he paid for

hey wait isnt ace's cpu like the 600mhz ones but only OC'ed to 800?

I'm done explaining

A fault with the processor probably.. ARMv6 anyway has 600Mhz by default and Ace has been factory overclocked to 800Mhz.. which is the simple reason why each Ace is so different and has so many problems regarding battery life. Overclocking is a delicate procedure..
To the point:
Just take it to the service center to get what you paid for!

Overclock

Hi ,
I have a few begineers questions , I have a galaxy s that is running gingerbread 2.3.6 , is rooted and had a voodoo kernel (with recovery option) . I was thinking of possibilities of overclocking , can that be done with the setup I have ?
thanks in advance

You can easily overclock your phone with a root access with an application like this :
bit.ly/fnUFCD
There are lots of applications existing.
You can see on your kernel thread on this board what frequency is supported.

try Tegrak overclock or NSTools. Find other apps on Market.
Sent from my GT-I9000 using XDA App

thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers

saintetienne said:
thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers
Click to expand...
Click to collapse
Semaphore is the best http://forum.xda-developers.com/showthread.php?t=1112908

thanks again , my phone is showing jvz suffix at end of kernel - show the semaphore jvz is the way to go ?
I am trying to avoid an expensive paperwight

Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App

sefira said:
Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App
Click to expand...
Click to collapse
Absolutely right

thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers

saintetienne said:
thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers
Click to expand...
Click to collapse
You can use CWM

install zip from sd ?
cheers

Plumped for odin in the end - all done , thanks to everyone for your help

Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?

Kops said:
Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?
Click to expand...
Click to collapse
Battery use will obviously be higher with the processor on more clock speed but there's no problem with the temperature. Remember, always overclock in minor steps,check stability and in this way you would get a stable phone

Module-OC

Hello,
My phone -xperia x8 white e15i
Kernel - Stock
It don't matter what Rom I use I can only OC till 691 MHz at 710mhz my.phone freeze and reboot.
also I get reboot time to time on 691.
I heard that very x8 should atleast be stable at 710
my question is.
Do I get a higher stable frequency if I use a different module other than Dix's???
I came across a module which offers a higher frequency .... search for better overclock you will find the thread.....so will I get a higher frequency? ?? using the other module???
I USED THE SEARCH BUTTON BEFORE POSTING.
so don't yell at me. : )

Help
I'm not too sure about this one since I'm a part noob much like you but have you tried flashing a different kernel such as Alfs? linuxxd is really good but doesn't allow overclocking as I found out with the same problem as yourself Sorry I meant stock kernel doesn't allow overclocking ...
If I helped you please answer my question on a new thread I made

It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.

A custom kernel allows better overclocking most of the time. When I was on stock kernal the highest I could get to was 710Mhz before rebooting. With a custom kernel I can get to 787Mhz before rebooting.
Sent from my E15i using xda premium

@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????

Chris95X8 said:
It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.
Click to expand...
Click to collapse
dependent on yes. with stock kernel to kernel naa 691 Mhz 806 big diference

what about.a different module??? it can increase potential? ??

noobismyname said:
@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????
Click to expand...
Click to collapse
You need to understand that the stock kernel is not designed for overclocking, it's only possible with modules for stock kernel.
You can try the other module but I doubt it'll be any improvement, if you want better overclocking you really should install a custom kernel.
Sent from my X8 using xda premium

overclock

Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you

dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
Of course the life of the cpu is reduced but not so much. I think it is not dangerous unless you set performance for scaling. I usually overclock it at 729 Mhz and have not problems at all

dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
i don't think it's dangerous if it still around 7xx, cuz i've use that for a while now n it's ok.
but i've try oc once with 864mhz and i found some problem that it suddenly get stopped working(hang), i try to reboot n it still the same.

will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks

dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
I use it almost all the time at 844mhz...i hv no problems...but i think it reduces life to someextent
Sent from my GT-S5570 using xda premium

techlearn said:
will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks
Click to expand...
Click to collapse
Here u go...i hope this might help
http://forum.xda-developers.com/showthread.php?t=1485122
Sent from my GT-S5570 using xda premium

techlearn said:
will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks
Click to expand...
Click to collapse
If you have stock, then there is no overclock for you. Usually, custom ROMs have overclock feature and apps like setcpu, nofrills, etc works on these ROMs.. You'll have to flash custom ROMs first before you can OC or you can check this page from godell:
http://forum.xda-developers.com/showthread.php?t=1485122
OC kernels for stock rom.. Disclaimer: Read first before you do anything. Do it at your own risk..

710 MHz is veeery safe. I only stopped my OC at 806 MHz because on 825 Mhz it was not stable.
At 806 MHz my phone do not heat up, and I didn't notice my battery dying faster.
PS: I OC my phone for more than 6 months continuously (GOvernor: LilgV2; I/O: noop). And use No Frills CPU.

I am having S5570DDKQ7 BaseBand Version, coz in thread he has mentioned not to use this for DDKQ7 version. Please post it in the thread.
as i am not able to post in thread coz i am having less than 10 posts.

thank for all

[Q] KERNEL UPGRADE or OVERCLOCK?

How can i overclock my rom?? please help me..
I am currently having this setting
..
please help me! :\
CURRENT SETTING: 600mhz
WANTED SETTING: 800mhz..
Can you please give me links and steps and requirements on what i will do..

if u want to overclock, flash custom kernel or custom rom that has kernel overclock feature.
search on dev section.
sent from my Walkman

derekgabs said:
How can i overclock my rom?? please help me..
I am currently having this setting
..
please help me! :\
CURRENT SETTING: 600mhz
WANTED SETTING: 800mhz..
Can you please give me links and steps and requirements on what i will do..
Click to expand...
Click to collapse
This ROM and it's kernel has OC already since it is based on CM7 by mebitek, look for Cyanogenmod settings, Performance, CPU settings, and set your max freq to your preferred freq under its options.. note that values are preset, you cannot choose 800, 806 is the preset one.. also, not all minis are stable at OCing above 800.. so, if your phone reboots itself at 806, set it to a lower value, 787 or 752..

chepoz said:
if u want to overclock, flash custom kernel or custom rom that has kernel overclock feature.
search on dev section.
sent from my Walkman
Click to expand...
Click to collapse
Uhm.. can you please direct me to one of that threads.. and can you also please give steps? Uhm.. totally pardon me from my ignorance.. im still a newbie in overclock and kernels.

kitrax59 said:
This ROM and it's kernel has OC already since it is based on CM7 by mebitek, look for Cyanogenmod settings, Performance, CPU settings, and set your max freq to your preferred freq under its options.. note that values are preset, you cannot choose 800, 806 is the preset one.. also, not all minis are stable at OCing above 800.. so, if your phone reboots itself at 806, set it to a lower value, 787 or 752..
Click to expand...
Click to collapse
ahh.. hehehe.. .. what would be the best and stable frequency of its maximum and minimum? .
BTW: thanks for the whereabouts of the frequency settings kitrax.. i really didn't know that my rom has this one.. .. THANK YOU..

derekgabs said:
ahh.. hehehe.. .. what would be the best and stable frequency of its maximum and minimum? .
BTW: thanks for the whereabouts of the frequency settings kitrax.. i really didn't know that my rom has this one.. .. THANK YOU..
Click to expand...
Click to collapse
no problem.. just play more with the ROM, as what others say. hehe anyway, mebitek's build is speedy already even at default freq.. 710 is enough for me.. min of 245 or 122.. mine is stable at 787 max only.. higher freqs than 787, it reboots itself. Could be different on yours.. just remember, OCing too high will also cause faster battery drain..

ok.. thank you kitrax.. i'll try to play more with the frequency now that i understand what it is.. hehehe .. thank you..