Database Develop

[solved] Soft brick, tablet resets during recovery activities

I have the wifi only 7310 model of the 8.9
Overcme CwM Recovery 5.1.2.6
ROM was Galaxian Soup AOSP 1.6
My tablet resets during recovery. Half through a data wipe ROM install ROM backup or ROM restore it will reset and reboot.
It first happened when i booted into recovery and triedROM issue. to make a back up of m y current ROM and attempt to flash the aokp one. It reset during the backup process.
It shouldn't be a ROM issue. My tablet did this once before, it would reset when i did anything involvng dataon an Overcome ROM i think. Data wipe/backup etc. I left it alone while the ROM still worked and tried again a week later with no issues.
Any ideas? Now i have a soft brick that cant boot past the Samsung Screen. I can get into recovery and download modes.
EDIT* added a video
EDIT2:
The issue was solved.
What ended up happening what i attempted to flash back to stock software, ODIN would stall during the system.img. From this point i thought it was done, but i could still get into the stock recovery, i used the stock recovery to wipe the data after several failed attempts in a similar manner to this video.
One day it just worked. I could finally wipe data and cache without a reset. But i could't flash a file because ODIN would still freeze on the system.img. It was suwandiapr who showed me his walkthrough to push an file to recovery from adb. Thank you so much
I do NOT know why it my tablet/recovery starting resetting when i wanted to do a data/cache wipe/restore or why it decided to start doing it again. I tried the 5.5 cwm, the overcome 5.1 and the stock and none of them worked. Today i tried it on an off chance of boredom and it started working again. It is a confusing situation but that is what happened.
Again that you so much to Mr.Home and especially suwandiapr for all your help

> If you had a back up you can do advanced restore of just your system partition to get you tablet back on, though you will probably still have problem with the recovery
> If not, download the stock firmware tar.
Boot up to download mode using the power + vol combo.
flash the stock tar through odin.
boot up to download mode again.
this time flash the cwm recovery.
boot up to recovery mode.
wipe dalvikcache and data.
install aokp and gapps.
if it fails (cwm recovery stuck and reboots by itself during wiping /data partition or dalvik cache)
,chances are your data partition had been corrupted.
You can try fixing this by reflashing the stock firmware tar through odin again
just this time you need to have re-partition ticked.
and repeat above steps.
Take note that this will format the content your sd card too apart from the /data partition
EDIT: Please post this on the general section next time

MrHome said:
> If you had a back up you can do advanced restore of just your system partition to get you tablet back on, though you will probably still have problem with the recovery
> If not, download the stock firmware tar.
Boot up to download mode using the power + vol combo.
flash the stock tar through odin.
boot up to download mode again.
this time flash the cwm recovery.
boot up to recovery mode.
wipe dalvikcache and data.
install aokp and gapps.
if it fails (cwm recovery stuck and reboots by itself during wiping /data partition or dalvik cache)
,chances are your data partition had been corrupted.
You can try fixing this by reflashing the stock firmware tar through odin again
just this time you need to have re-partition ticked.
and repeat above steps.
Take note that this will format the content your sd card too apart from the /data partition
EDIT: Please post this on the general section next time
Click to expand...
Click to collapse
Sorry for the wrong section, it didn't seem like a general question to me. How do i use ODIN?

bdfull3r said:
Sorry for the wrong section, it didn't seem like a general question to me. How do i use ODIN?
Click to expand...
Click to collapse
Download Odin 1.85
Install Samsung USB drivers (should come with Kies)
Download stock firmware from samfirmware
Check the box beside PDA
Put the .md5 file into the PDA slot
Leave all other options on defaults
Put tablet into Download Mode (power and vol -, select the one that isn't recovery)
Connect it to your PC
Press START in Odin
Wait ~10 minutes
NOTE: this shouldn't wipe the internal sdcard. if you need to wipe that, select repartition and give Odin a PIT FOR THE P7310/7300 MAKE SURE IT'S THE RIGHT ONE OR YOU WILL BRICK BADLY.

Moved To General​
I understand this might be a development related question, but questions do not belong here.​

im still bricked so if ANYONE has any ideas please let me know.

Do you have a backup of yours in computer? If yes.. Push your file to device with adb...
Or replace with cwm 5.5.0.4.. ( if you not familiar with odin)
From cwm recovery 5.1.2.6 mount your /data and /system..
After that push your file (cwm 5.5.0.4. Zip and your backup file) to sdcard trough adb
Install cwm 5.5.0.4 from your recovery..then reboot..
Before you install your backup file.. Try to wipe and reboot your phone.. If problem still exist.. Your assumption about ROM may right.. But if your booting problem disappear.. I think its because yor recovery..

suwandiapr said:
Do you have a backup of yours in computer? If yes.. Push your file to device with adb...
Or replace with cwm 5.5.0.4.. ( if you not familiar with odin)
From cwm recovery 5.1.2.6 mount your /data and /system..
After that push your file (cwm 5.5.0.4. Zip and your backup file) to sdcard trough adb
Install cwm 5.5.0.4 from your recovery..then reboot..
Before you install your backup file.. Try to wipe and reboot your phone.. If problem still exist.. Your assumption about ROM may right.. But if your booting problem disappear.. I think its because yor recovery..
Click to expand...
Click to collapse
I've tried switching recoveries, the device still resets like in the video posted above

bdfull3r said:
I've tried switching recoveries, the device still resets like in the video posted above
Click to expand...
Click to collapse
I never try it before.. how about stock recovery? It will wipe your data partition include SD card..But it worth to try if you dont like ODIN..
here is the zip version..Instal from recovery..
Edit: Do with your own risk..

After looking at the video, I noticed something similar that had happened to me before.
It happened when I tried to wipe the "cache" first, instead of wiping only the "dalvik cache".
After that, whenever i tried to wipe the dalvik cache/reset factory data,
the recovery reboots by itself halfway through.

MrHome said:
After looking at the video, I noticed something similar that had happened to me before.
It happened when I tried to wipe the "cache" first, instead of wiping only the "dalvik cache".
After that, whenever i tried to wipe the dalvik cache/reset factory data,
the recovery reboots by itself halfway through.
Click to expand...
Click to collapse
But how do i fix it?

bdfull3r said:
But how do i fix it?
Click to expand...
Click to collapse
Check the thread in my signature on the ODIN How-To, Drivers (no Kies/Bloat needed for drivers) and more. If I were you I'd ODIN so the Stock Recovery is restored in place. Looks like something went wrong in your CWM Recovery's installation (could be a bad download you had, it happens). All the files you need (except for the ODIN image) are in my General Guide.

nirogu325 said:
Check the thread in my signature on the ODIN How-To, Drivers (no Kies/Bloat needed for drivers) and more. If I were you I'd ODIN so the Stock Recovery is restored in place. Looks like something went wrong in your CWM Recovery's installation (could be a bad download you had, it happens). All the files you need (except for the ODIN image) are in my General Guide.
Click to expand...
Click to collapse
Its not the recovery, i have changed recoveries two or three times now through ODIN and they all perform the same way

bdfull3r said:
But how do i fix it?
Click to expand...
Click to collapse
Well, i just don't wipe cache. Only the dalvikcache and all went well..

I have a soft brick, no memory or sd card data. I can get into recovery but i don't have any files on the tablet to flash.

Are you windows user? if yes..
Just like my answer from previous post.. See page one!
Mount your /system and /data partition from recovery menu..(from cwm)
From your computer.. Use this tools for pushing the file flashable.zip to device..
After that you can flash a new rom from recovery..
http://forum.xda-developers.com/showthread.php?t=1539352

Thank you so much sir. I worked and I no longer have a brick

bdfull3r said:
Thank you so much sir. I worked and I no longer have a brick
Click to expand...
Click to collapse
Glad to hear that..
Add your thread subject with [solve] for closing the thread..

[Q] Help Needed Phone stuck on N7000 screen

Phone won't boot past Galaxy Note Boot image
Phone will go in download mode by pressing Vol-Home Power buttons
Phone will go in recovery menu by pressing Vol+Home Power buttons but if i try to flash anything it shows verification error.
Anything flashed with Odin, goes successfully without any errors, but phone still won't boot past Galaxy Note boot image. When connected to PC in Odin mode USB recognised, when connected to PC with Galaxy Note boot image, USB not recognised (malfunctioning error appears)
I tried flashing ics/gb stock roms, kernels, pit files, and nothing helps
Please help
lastly
HAVE FLASHED N7000DDLC1_N7000ODDLC1_N7000DDLC1_HOME.tar.md5 using pc odin 3.04 and still stuck on gnote boot image
and lastly updated with :: N7000XXKL3_N7000ODDKL1_N7000DDKL1_HOME.tar.. but to no avail..
please help

do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom

anubis1126 said:
do you have a custom kernal on such as hydroacore if you do or can try wiping cache and dalvic and factory reset then try reflashing if using pc maker sure kies is installed but dont use it use odin to flash a stock rom
Click to expand...
Click to collapse
actually was on the stock ics and tried to install kingdroid by CWM.zip
and wiped data and cache from touch/temporary cwm..
then after install it got stuck on the first screen...
since then have tried to flash stock ics / gb firmwares but not getting past the first screen

first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...

it can take 5 to 10 mins after install to start however if it still goes no further and you can get into recovery can you flash any custom kernal,if you can do so then wipe and try to reflash if not i would ask dr ketan as he is awesome and may be able to help

^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!

letters_to_cleo said:
first of all, make sure you don't make some foolish steps in wiping your phone., secondly, try to uninstall cmpletely PC kies and reinstall it again after. Once you've reinstalled that, don't open it, just open PC ODIN and try to boot back your phone in download mode. Make sure you have a yellow box on COM:1 in ODIN and use an extracted stock GB tar file and start flashing again.
EDIT: Since you've just mentioned you already wipe data in stock ICS.. are you using a safe kernel when you did the wiped?
if not, you may have toasted your Note.. imho...
Click to expand...
Click to collapse
i was using the temp cwm used to gain root to flash .. very stupid i know..
my recovery and download modes are accessible so is my phone toast..
and if yes it is toast .. how to recover ??

letters_to_cleo said:
^ No need to wait for that, as OP has already done a stupid thing of wiping on a touch CWM.. something that shouldn't be done at all....
only thing he can do is go to the section for the pit method partition to revive his phone... that's it!
Click to expand...
Click to collapse
since i do have warranty on my phone left for another 2 months should i give it to the samsung repair center ?? what will they repair and how much time is expected it to repair ??

I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method

letters_to_cleo said:
I suggest you ran first the partition scanner from here: http://forum.xda-developers.com/showthread.php?t=1823918, see if your partition don't have one of those bricked blocks....(courtesy of hg42)
Also consider this link - http://forum.xda-developers.com/showthread.php?t=1667886 for the pit file method
Click to expand...
Click to collapse
but sadly the stock recovery is not accessing my memory card files and only internal sd and it has no option to mount storage ..
how to access the files i put in my memory card.. or should i flash some other ics stock rom as they have more options in stock recovery ??

no need to aggravate the problem by flashing another ICS... your Note's been bitten already.. don't let it bite twice...

Your last rom flashed is KL3 then have you wipe cache and data from recovery?
If not then do it, it should boot then.
Make sure last rom was flashed correctly and u are currently on KL3
If you have to press home button in recovery to enter your choice then it should be gb (kl3)rom (on ics you need to press power to select)
If wiping cache and data also not work, then flash wipe version of gb rom. If it stuck at data.img then yu have got damaged and should send to service Centre, without doing anything
Sent from my GT-N7000 using xda premium

[Q] [N7000] Stuck on boot i tried everything Any help ?

Hi everyone so i was using my n7000 on stock GB for daily and suddenly it stopped working and wouldn't boot ( stock on SAMSUNG brand ), even if i can get to download mode and recovery and flash stock again , doesn't work . here is a list of thing i tried :
- flash stock GB KKA ( with and without pit )
- flash rooted stock GB KJ1 ( with and without pit )
- flash stock ICS LRI ( with and without pit )
- flash stock ICS LRI then flash CF Root
- tried adb to push the a custom zip rom and boot directly in the installing but doesn't work
- tried repartition of the memory and reflash the stock roms
none of this seem to work always same problem i'm still stuck at the brand logo, oh and i tried putting the custom rom zip on external sdcard but it doesn't get detected in cwm
here is a list of errors that i get when trying to flash from cwm :
- error couldn't mount /sdcard
- couldn't moun't /emmc
- unable to write to ums lumfile (no such file or directory)
I'm runing out of ideas, is there something that i missed ? all suggestions are appreciated, Many thanks

Did you get errors while flashing with Odin ? If not, you are clear fromm emmc bug.
Try doing a factory reset in recovery (wipe data, factory reset)

lionelia said:
Did you get errors while flashing with Odin ? If not, you are clear fromm emmc bug.
Try doing a factory reset in recovery (wipe data, factory reset)
Click to expand...
Click to collapse
no i don't get error on odin, and yes i tried wiping data / cache/dalvik / format system / format emmc ... many times
nothing work :/

You should try to restore bootloader

1.Flash ClockWorkMod Recovery.
2.Wipe everything - Data,Cache,Dalvik Cache etc.
3.Then re-boot the device.
4.When it comes to the Samsung logo take out the Battery and then power on the device.
5.Wait 15 minutes-20 minutes and do something else in the meantime to ward of anxiety.
6.If the device doesn't start properly try removing sim and sd card and re-trying steps 2 to 5.
7.If that also fails then do step 2 to 4 and then enter download mode.
8.Flash stock GB or ICS.
9.When the device boots to the Logo, remove the battery.
10.Disconnect from PC and then re-boot and then wait for 15-20 minutes.
Just my two cents! Let me know if it works! If it doesn't then no other go then to take it to a service center.
Sent from my Xperia Pro using xda app-developers app

better flash a GB rom.. does it say pass in odin and successful? if no, then paste the logs

Try flashing a stock ODEX rom. I'd personally go for the Rooted_Stock_Odex_N7000XXLC1, as its a full-wipe, rooted GB rom. Flash that in Odin and you shouldn't have any problems.
http://forum.xda-developers.com/showthread.php?t=1535025

ajabhi95 said:
1.Flash ClockWorkMod Recovery.
2.Wipe everything - Data,Cache,Dalvik Cache etc.
3.Then re-boot the device.
4.When it comes to the Samsung logo take out the Battery and then power on the device.
5.Wait 15 minutes-20 minutes and do something else in the meantime to ward of anxiety.
6.If the device doesn't start properly try removing sim and sd card and re-trying steps 2 to 5.
7.If that also fails then do step 2 to 4 and then enter download mode.
8.Flash stock GB or ICS.
9.When the device boots to the Logo, remove the battery.
10.Disconnect from PC and then re-boot and then wait for 15-20 minutes.
Just my two cents! Let me know if it works! If it doesn't then no other go then to take it to a service center.
Sent from my Xperia Pro using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply i'll give it a shot and see if it works

nokiamodeln91 said:
better flash a GB rom.. does it say pass in odin and successful? if no, then paste the logs
Click to expand...
Click to collapse
Flashing in odin is perfectly normal there is no errors no weird messages and it flash in normal time

Your last chance is to flash bootloader with Odin, anyway it wont be worst.

[Q] Galaxy S Plus black screen, CWMrecovery says "can't mount...

I'm a noob I know and yes I watched the noob-video. But I need help! Cuz I'm too dump! So please help me
I wanted to update my Galaxy S Plus to the newest CM 10 (Beta 4) (before it was the Beta 3) over the CWM recovery it suddenly says
"symlinks failed"
"error in /sdcard/cm-10-20130324-invendor-beta4-ariesve.zip"
"(Status 7)"
"installation aborted"
so I looked to the CWM recovery and I saw that I don't have the latest version....okay I downloaded the latest one and installed it over the CWM recovery. The same error .... with friends. Now I got when I went into the CWM recovery: (after I tried to wipe data/factory reset or wipe cache)
"E:Can't mount /cache/recovery/log"
"E:Can't open /cache/recovery/log"
"E:Can't mount /cache/recovery/last_log"
"E:Can't open /cache/recovery/last_log"
I tried to restart the phone...black-screen after the samsung cyanogen mod screen.
Okay
So I tried to flash a older firmware "I9001XXKQ7_I9001DBTKP2_I9001XXKPK_HOME.tar.md5" with Odin. I restarted the phone...nope black screen. I installed the newest CWM recovery again and tried to flash again the CM 10. Black-screen. So I tried the old version of the CM which I had before (Beta 3) -> black-screen and still errors in the recovery mode.
I can still go into the download mode and the recovery mode. The charging symbol is not working when i connect it (just the battery but bot moving)
My device:
Samsung Galaxy S Plus
Provider: Vodafone IT
ROM: CM 10 (Beta 3) installed but not working
Kernel: Phenom 3.2 UV (updated after the symlinks failed error)
I hope some genius out there can help me
And sorry for my bad english...I don't use it often (Italy)

Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have

Thanks!
Hey! Thanks a lot! I'll try it out and report it if its working :good:

EwOkie said:
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Click to expand...
Click to collapse
!!!!!!!!
dont download the files there!
i think they are for i9000, but the thread starter has an i9001
!!!!!!!!!
have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco
edit: just found
http://forum.xda-developers.com/showthread.php?p=39640245
Regards

Okay
Okay! I didn't do it yet sooo ... I'll try that one and thanks for the link! :good:

then...?
"have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco"
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?

Imanidiot said:
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Click to expand...
Click to collapse
take your time...
what errors does the cwm 5.5.0.4 recovery shows without doing anything?
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu

Hi everybody I'm new.
My situation is exactly the same, I did the same things, got the same problems... got stuck with no solutions yet if not to send it to samsung assistance.
Flashad many other android phones in the past and never had issues like this... it's a nightmare...

try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Click to expand...
Click to collapse
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7

Imanidiot said:
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Click to expand...
Click to collapse
I also tried the broodROM RC5, succesfully flashed with Odin but still the same problems as before.
Can't format /data.

Stock-Firmware
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/

Imanidiot said:
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Click to expand...
Click to collapse
I already did that too but it didn't work...
I'm gonna go to the samsung assistance in the afternoon... :crying:

Well....Nothing is working...Anyone who could help me? ... Or better us..

If my guide is no use to you as its for i9000 : try this HERE
If that helps you in any way let me know.

I did this already... I flashed it with the newest stock-FW but it doesn't do anything...and the stock-recovery can't make a factory reset. It always freezes....

other things that could be worth a try:
try flashing different recoveries - not only feamod... also cwm,...
for me cwm5.5.0.4 works
look: our wiki-page -> un-brick
if all doesnt help you could try to reset all partitions

I tried already a few recoveries...like the CWM or the TeamWin... How can I reset them? Can you give me a link please? ^^

Flash BroodROM RC 5... flash this multiple times without touching any buttons like repartion etc..
After that, wipe system and data via the recovery provided in the ROM.
Then flash the newest stock FW from samsung..
This solved all my issues multiple times xD

thanks for the reply, but my phone is now finally brocked....it doesn't even start....and I don't have any idea what i can do now...

??
So, now Samsung, no Samsung Galaxy S Plus GT-I9001? No nothing. Not even the soft brick image (see wiki)

[Q] Formatted /system and /boot (CWM), doesn't boot. [i9000]

Hey guys . I formatted /system and /boot when i entered CWM, i formatted cache and wiped data, and flashed a new rom, but when i hit "reboot" the phone restarted and the image with the writing "GALAXY S GT-i9000" apears and remains here, the phone won't boot anymore (i formatted /system and /boot because i thought the rom would install more freshly and would not apear problems, but i didn't need to format those :|).
I can't enter anymore in CWM Recovery (probably deleted because i formatted /system) or stock Recovery :| , the only thing that works is Download Mode. :\
What you recommend to do to fix this?
I saw the tutorial with fastboot to flash a new boot.img but i formatted the /system too. Most probably this will not fix anything. Another way i though of, is to flash via Odin a new Software but, after i formatted the /system and /boot i already installed a new rom but didn't booted anymore after reboot, although i think this will not be a problem because will overlay the already rom or something, but i'm not sure and i'm not sure i will find a software that i can flash through odin.
I don't have an external sd card, only internal memory that comes with the phone.
I also read that you can format /system if you don't reboot it after you format it and flash the rom. Could be the problem only the /boot that i formatted? I just need to flash a boot.img, if yes, how do i do it, with that softwares.
Thank you a lot in advance!
sorry for my english, not my native language

MihaiDani93 said:
Hey guys . I formatted /system and /boot when i entered CWM, i formatted cache and wiped data, and flashed a new rom, but when i hit "reboot" the phone restarted and the image with the writing "GALAXY S GT-i9000" apears and remains here, the phone won't boot anymore (i formatted /system and /boot because i thought the rom would install more freshly and would not apear problems, but i didn't need to format those :|).
I can't enter anymore in CWM Recovery (probably deleted because i formatted /system) or stock Recovery :| , the only thing that works is Download Mode. :\
What you recommend to do to fix this?
I saw the tutorial with fastboot to flash a new boot.img but i formatted the /system too. Most probably this will not fix anything. Another way i though of, is to flash via Odin a new Software but, after i formatted the /system and /boot i already installed a new rom but didn't booted anymore after reboot, although i think this will not be a problem because will overlay the already rom or something, but i'm not sure and i'm not sure i will find a software that i can flash through odin.
I don't have an external sd card, only internal memory that comes with the phone.
I also read that you can format /system if you don't reboot it after you format it and flash the rom. Could be the problem only the /boot that i formatted? I just need to flash a boot.img, if yes, how do i do it, with that softwares.
Thank you a lot in advance!
sorry for my english, not my native language
Click to expand...
Click to collapse
First of all i think that if you formatted the system and you didn't have an external sd card you might have wiped everything off your device . But lets try some options first. If you flashed a GB or JB rom most times the partition is changed and you have to remove the battery during the start-up (called a boot loop) this is normal. So try to reboot your device but when you have seen your samsung logo and such for a couple of minutes remove the battery, then replace the battery and start as if normal. If that doesn't solve your problem then you will have to put the phone in download mode and manually reflash your device using odin to stock then try all over again with your new rom. In the future, when you try using CWM again just do a factory reset, clear cache partition and under advanced clear dalvik cache then install from sd card, scool down and choose the rom then highlight it (volume up and down arrows) and install (power button).

You killed the bootloader of the phone, flash it back via Odin
Bootloaders here!

kevnac said:
First of all i think that if you formatted the system and you didn't have an external sd card you might have wiped everything off your device . But lets try some options first. If you flashed a GB or JB rom most times the partition is changed and you have to remove the battery during the start-up (called a boot loop) this is normal. So try to reboot your device but when you have seen your samsung logo and such for a couple of minutes remove the battery, then replace the battery and start as if normal. If that doesn't solve your problem then you will have to put the phone in download mode and manually reflash your device using odin to stock then try all over again with your new rom. In the future, when you try using CWM again just do a factory reset, clear cache partition and under advanced clear dalvik cache then install from sd card, scool down and choose the rom then highlight it (volume up and down arrows) and install (power button).
Click to expand...
Click to collapse
I did that, i reflashed stock os via Odin, then rooted, flashed cwm recovery and flashed rom. Thank you anyway .

Galaxy S4 I9000
Hello, dont worry about your phone. Actually your phone has been bricked down and now you just have to unbrick your Galaxy S4. Check the galaxy s4 xda forum or just google the topic that "how to unbrick Galaxy s4 with your model no" and then follow the steps given in the tutorial. Thanks

MihaiDani93 said:
I did that, i reflashed stock os via Odin, then rooted, flashed cwm recovery and flashed rom. Thank you anyway .
Click to expand...
Click to collapse
Hi MihaDani93,
I'm having the exact same problem, I rooted with CF-Root, then cleared cache/dalvik and formatted system and rebooted on a stock 2.3.6 model i9000. It also stucks at the Samsung logo splash screen and freezes.
Only thing is I dont have the original stock ROM. I don't know how to reflash the phone.
Can you tell me in detail how you reflashed to stock with what files and where I can get those files from? PIT, PDA, PHONE and CSC md5 files and so on?
Thank you very much in advance!
Rob

pomaro2006 said:
where I can get those files from? PIT, PDA, PHONE and CSC md5 files and so on?
Click to expand...
Click to collapse
you can use this guide to flash gingerbread Stock ROM.
Check this out! You , YES! you are an " Android ". Not your phone but U.​