Database Develop

my ace is break cant flash any rom (big partition size!!)

hi
when i flash any rom using odin
it told me
PHP:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
then nothing happen !!
it stuck in mibib download
so,,, any help

islam_ashraf said:
hi
when i flash any rom using odin
it told me
PHP:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
then nothing happen !!
it stuck in mibib download
so,,, any help
Click to expand...
Click to collapse
Hey!
Can you go into recovery option(POWER+HOME button together, untill it going to menu)? If you can, MAYBE FATCORY SETTINGS and CACHE CLEANING helping. Try and let US know here.
CHEERS!

Did you enable debugging mode on Odin? Try disabling it... Which version of Odin you have?

@casiocas
i dont have recovery it happen when i want to flash VillainROM and i forgot to
Perform a full wipe of data/cache. Dial *#*#7780#*#* from your current ROM, and this will wipe data and perform a factory reset.
Click to expand...
Click to collapse
@fla.sh
debugging option is disabled and my odin version is 4.38

can i flash recovery by odin ?
in this topic ([OFFICIAL] ClockWorkMod 4.0.0.9 - Flash via recovery)
i must have recovery to flash it

I think it's not bricked. It tends to stop at that part. Try to flash again, then wait for more than 1 minute, 2 mins top (you can see the counter on the left side of Odin) then see if it ends to the part "Close serial port... blah blah" then your phone restarts.

i left my phone about 88 minute !! it freeze in the same point
i think if i can flash any recovery version using only odin and then wipe and factory rest my phone it will work
now im trying http://forum.xda-developers.com/showthread.php?t=1121192 but recovery file size is very big 205 Mega !!

Which ROM you're trying to flash?

any rom
already tried S5830XXKPH and VillainROM
and others
every rom stuck in the same point

just flash the recovery from
[RECOVERY]Unofficial ClockworkMod Recovery v4.0.0.2(WIP)
and its pass !!
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> boot.img download..
<1> 1/4 Finished.
<1> recovery.img download..
<1> 2/4 Finished.
<1> system.rfs download..
<1> 3/4 Finished.
<1> data.rfs download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Click to expand...
Click to collapse
but when i press POWER+HOME button together
it didn't take me to recovery screen

Dose it NOT going into RECOVERY, if you push together HOME+POWER? You must push them, until you screen flashing ONCE and after this wait to GALAXY ACE..., not only to SAMSUNG, but after SAMSUNG... is coming GALAXY ACE... logo, then you can RELEASE your HOME+POWER buttons and NOW YOU must be in OFFICIAL recovery screen.
CHEERS!

oka
now im in recovery i wipe data /factory rest
and wipe cashe partitien
and when flash rom by odin still have the same problem
tried to flash by another pc
and the same message i get !!!
can i flash any room via recovery ??

also need to know some thing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this Download mode is normal ??!

islam_ashraf said:
also need to know some thing
this Download mode is normal ??!
Click to expand...
Click to collapse
Jep,its normal, if you get to thereOWER+HOME+VOL.DOWN. holding together THREE buttons in once(its needed to FLASH with ODIN). Just asking(dont take personally), do you know EXACTLY, how to FLASH with ODIN?(in case, if you dont know it, read this: http://forum.xda-developers.com/showpost.php?p=12874680&postcount=1)
CHEERS!

casiocas said:
Jep,its normal, if you get to thereOWER+HOME+VOL.DOWN. holding together THREE buttons in once(its needed to FLASH with ODIN). Just asking(dont take personally), do you know EXACTLY, how to FLASH with ODIN?(in case, if you dont know it, read this: http://forum.xda-developers.com/showpost.php?p=12874680&postcount=1)
CHEERS!
Click to expand...
Click to collapse
Lol
i have samsung spica
and i break my phone about 777 time!!
and i fix it do its jot my first time using odin
but the problem with ace its stuck in the same point in all rom
befor thats happend i flash the arabic rom and my friend doesnt like it cause it have a bad look in addidtion it doesnt contain market!!
so i try a cooked rom witch exist in developer section(i cant rember the name of the rom, i open from my mobile.)
and the problem start when i faild to flash the cooked rom
then i thought it the wrong with the cooked rom
so i try another and others rom
and the same problem happen!!
by the way the first flash rom screen it come normal
(the android robot have a tool and remove something)
and it changed after i flash the arabic rom
sorry for a lot talk

islam_ashraf said:
Lol
i have samsung spica
and i break my phone about 777 time!!
and i fix it do its jot my first time using odin
but the problem with ace its stuck in the same point in all rom
befor thats happend i flash the arabic rom and my friend doesnt like it cause it have a bad look in addidtion it doesnt contain market!!
so i try a cooked rom witch exist in developer section(i cant rember the name of the rom, i open from my mobile.)
and the problem start when i faild to flash the cooked rom
then i thought it the wrong with the cooked rom
so i try another and others rom
and the same problem happen!!
by the way the first flash rom screen it come normal
(the android robot have a tool and remove something)
and it changed after i flash the arabic rom
sorry for a lot talk
Click to expand...
Click to collapse
LOL!
NP, just asked.
Maybe you can try the first STOCK FROYO release. Sometimes ROM-s can mess up bootloader. It may help. If not then I dont REALLY know how to help you(I am not developer. Havnt PROGRAMMER knowleage. SORRY!). Hope you get it FIXED(sometimes it takes A LOT of trying to flash ROM-s, before it finally get fixed). Just START from beginning(from FIRST FROYO release). And if this not working, try ONLY STOCK ROM-S after FROYO(GB_2.3.3 AND 2.3.4). Try AGAIN. We will see.
CHEERS!

did you have coolya's ext4 kernel installed??..that could have messed up the partitions because it converts the file system to ext4 from rfs...
btw the same error occurred when i flashed Code.ROMv1 but i ignored it and it worked out fine...

kills999 said:
did you have coolya's ext4 kernel installed??..that could have messed up the partitions because it converts the file system to ext4 from rfs...
btw the same error occurred when i flashed Code.ROMv1 but i ignored it and it worked out fine...
Click to expand...
Click to collapse
Jeah, you right, but I was ABLE ALWAYS flash with ODIN after messing up things. But in hes case its little different.
CHEERS!

i didnt have any kernel
the problem start when i try to flash villainrom
after flashing the arabic official rom
oka i think i will try flash [ROM]Code.ROMv1
but i cant find the download link !!
what a luck im so lucky in these days !!
and how to know my file sysytem tyb
i went to the recovery and cant find any information about it

just flash S5830XWKC3 (2.2.1)
and thats what i get
so how can i convert my file system to the normal type

[Q] My Galaxy mini work on downloading mode only

Can anyone help me, my galaxy mini work only on downloading mode, i can't turn on my phone, i have this problem after using the DD method for unlocking the phone.
i tried with Jtag for boot resurection but it's also the same problem, the phone display samsung when he start and reboot on loop.
thanks for the help.

ChAyOTte said:
Can anyone help me, my galaxy mini work only on downloading mode, i can't turn on my phone, i have this problem after using the DD method for unlocking the phone.
i tried with Jtag for boot resurection but it's also the same problem, the phone display samsung when he start and reboot on loop.
thanks for the help.
Click to expand...
Click to collapse
if ur in download mode..then u can flash stock firmware, even after that it gets stuck??

what do you mean by stock firmware ?
i tried to use odin to flash the phone, but after reboot i have the mase problem.
thanks for your reply

I have the same problem, i tried to flash it with the original firmware, but after reboot the phone doesn't work

ChAyOTte said:
what do you mean by stock firmware ?
i tried to use odin to flash the phone, but after reboot i have the mase problem.
thanks for your reply
Click to expand...
Click to collapse
stock firm= froyo,gb. available on samfirmware.com
ya it's done using odin only....download frm samfirmware n try again

For rooting ...
And once you fix your phone, use the upd_1.zip or tass-recovery-cwm.tar to root the phone.
Please note that if you want to remove the lock put in by the carrier, it is a different game.

tha same problem when i use odin with the original frimware.
i don't know what to do to resolve my problem
the phone start, but i have screen flickers.

1 Which version of odin? (Please give full file name)
2. Which firmware version?
3. Have you chosen the appropriate files in appropriate columns - tass, modem, csc, etc? (Or used the one package option - you cannot use one package option for packages with separate files and otherway around too).
4. Are you using the correct USB drivers on the PC?
5. What exactly do you mean by screen flickering?
Can you post output of the log in ODIN?

Hello,
i am using Odin v4.38
i tried to use multiple frimware like: S5570XXKPF, S5570BGKC3_XECKC2_BGKC1, and the original frimware: S5570XXKB1
i am using the correct usb driver from samsung.
for the sreen flickering, i meam when the phone download all package from Odin and after rebooting, i have screen flickering and the phone don't boot.
this is the log from odin:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/10 Finished.
<1> qcsbl download..
<1> 2/10 Finished.
<1> oemsbl download..
<1> 3/10 Finished.
<1> amss download..
<1> 4/10 Finished.
<1> arm11boot download..
<1> 5/10 Finished.
<1> boot.img download..
<1> 6/10 Finished.
<1> recovery.img download..
<1> 7/10 Finished.
<1> system.rfs download..
<1> 8/10 Finished.
<1> data.rfs download..
<1> 9/10 Finished.
<1> csc.rfs download..
<1> 10/10 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
thanks for your help

Per logs, everything is going right. Unless you messed up the order in files are chosen in odin. (tass.ops, csc, modem, etc).
Can you post a video of the flickering problem? You may have to use another phone, and post the video to youtube.
Also, my question remains - was the phone tied down to any particular carrier?

If you are having boot loop you should wipe data and cache in recovery.
If you are trying to flash gingerbread and don't have a carrier locked phone you can try flashing any gingerbread available at samfirmware.com. They work with any region's phone. If you need details on upgrading visit this:
http://yagyagaire.blogspot.com/2011/08/upgrade-samsung-galaxy-popmini-gts5570.html

description about screen flickering because i don't have another phone to take video: when you put on the galaxy you have displayed in the scren Samsung www.samsungmobile.com and the phone reboot in loop and you have every 3 seconde samsung, and i can't turn off the mobile, for turn off i remove the battery.

i don't have acces to recovery mode, i have only downloading mode.
i tried to install new firmware like Gingerbread, but i have the same problem.

Tried installing CWM recovery and then getting into recovery mode?

yes i tried now, and also the same problem.

Have you tried other key combinations? Like pressing the big button in middle while holding the power button?

Yes i tried and also the same problem.

ChAyOTte said:
Yes i tried and also the same problem.
Click to expand...
Click to collapse
What's your problem by the way... Are you able to see samsung logo or text?? try flashing gingerbread from start. Read this if you have problem...
http://yagyagaire.blogspot.com/2011/08/upgrade-samsung-galaxy-popmini-gts5570.html
And if it is successfull I am sure you'll be able to go to recovery so wipe data and cache there. Otherwise falsh CWM recovery then go toi recoveyr and wipe data and cache...
Remember Home + Power Button = Recovery

the same problem with Gingerbread, i tried 4 version

hi there!
i have same problem . i try to install any rom . on some rom i see big partition size error . i can't power on my phone. does exist any way to format cache or data or any wipe command to clear all data on phone?

[Q] i9001, bricked or no?

My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...

darristan said:
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
Your phone issent bricked,i had the same issue.
What worked for me is installing the Broodrom.
Here is the link : http://forum.xda-developers.com/showthread.php?t=1396837
Everything you need is posted by Broodplank in his first post.
Once you installed it, you can go back to any rom you would like, altough de Broodrom is a very good rom!!
If you have cwm installed, try to format your partitions first?
Hope this will help you in some way,

How can I flash BroodROM if I couldn't go to CWM at all, I don't see if there is odin flashable package...

darristan said:
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
I have the samme issue as you. (((

Have you found a way to solve it? :[

darristan said:
Have you found a way to solve it? :[
Click to expand...
Click to collapse
If your asking me, No, not yet ((

darristan said:
How can I flash BroodROM if I couldn't go to CWM at all, I don't see if there is odin flashable package...
Click to expand...
Click to collapse
Look better, BroodRom can be installed with Odin.
http://sourceforge.net/projects/broodrom/files/broodROM_RC5.rar/download
Follow the instructions in Cybertek's post.
I hope I was useful.

My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
hi. did you fix that because i have the same problem and i'm looking for help please

hac12 said:
hi. did you fix that because i have the same problem and i'm looking for help please
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1802098

xsenman said:
try this http://forum.xda-developers.com/showthread.php?t=1802098
Click to expand...
Click to collapse
thanks for the help but it still dosen't work. i treid:broodROM_RC5_Extras_Only and/GT-I9001_XEO_I9001XXKPU_I9001XXKPH_I9001OXAKP1
and it didn't boot. after i treid to flash via odin FeaModRecovery_1.2.tar and it stuck on samsung logo. i'm asking if you can link me a good rom so i can flash it i have 9001 gsmh thanks in advance

Mounts problem

Hi, i have a problem. My phone wont mount everything. I mean i can't flash firmware via Odin or flash custom rom via CWM. I dont know why. I go to CWM>Mounts and storage, and i press mount /data then my phone says "Error mounting /data" ! This problem occurs in all mounts(i mean data,system,sdcard,sd-ext). I hope that somebody understand me.

Also happened to me. Flash stock, then CWM and our should work. I never figured out the reason why it happened, but it's fixed by this.
Sent from my GT-S5570 using xda premium

I tried, but this dont work. I should do that again.

Dont work. Maybe log from odin will help.
Here's log:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.

Try diffrent stock rom and check your gg communicator ;p

I try 3 stock roms and it still dont work.

Try a 4 package 2.2, then flash one package 2.3, then CWM. Finding a 4 package froyo isn't easy, I found it on a random Russian forum.
Sent from my GT-S5570 using xda premium

I have a four package 2.3 it is European xxkp or sth ...
Always use four package when you revert to stock from anything else just to prevent complications ....
Sent from my GT-S5570 using xda premium

hsay said:
I have a four package 2.3 it is European xxkp or sth ...
Always use four package when you revert to stock from anything else just to prevent complications ....
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Thank you so much ! You solved my problem. My phone works fine now. I just only flashed four package.

hsay said:
I have a four package 2.3 it is European xxkp or sth ...
Always use four package when you revert to stock from anything else just to prevent complications ....
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Thanks man. I had that problem too. Wohoo solved.

[Q] TWRP (os2sd) Recovery loop (HELP Please)

Recently Flashed OS2SD-TWRP 2.8.5.0 . Flashed CyanogenMod 12.1 rom From @cars1189 . After flashin it the wrong way i believe i got a message saying "Encryption Unsucessful" and to reboot . when i rebooted it automatically tried to go into recovery mode and that when it started looping (keeps blinking) at the TWRP screen. i am able to go into download mode but my Computer reconize it as "Unknown USB Device (Device Failed Enumeration)"
Who Knows how to fix this problem?

Download mode drivers work well with xp, vista, and win7. Try this to get synced and for Odin. Follow this reference and you should get stock back.

jfbs said:
Download mode drivers work well with xp, vista, and win7. Try this to get synced and for Odin. Follow this reference and you should get stock back.
Click to expand...
Click to collapse
i installed windows 7 now ... got the drivers to recognize the phone in dowload mode but now wa is happen is Odin is now crashing when ever i try to flash the recovery -.- i get "odin is nor working properly" and now my phone is now saying (Upgrade with Kies)

Have you tried running Odin as admin since you're using win7?

help !!
Recently Flashed OS2SD-TWRP 2.8.5.0 . Flashed CyanogenMod 12.1 rom From @cars1189 . After flashin it the wrong way i believe i got a message saying "Encryption Unsucessful" and to reboot . when i rebooted it automatically tried to go into recovery mode and that when it started looping (keeps blinking) at the TWRP screen. i am able to go into download mode but when i try to flash a recovery via odin it gets stuck at setup connection.
i removed kies, installed samsung usb driver several versions, change usb cables, ports, rebooted.
please help !!

Did you ever figure out a solution? I have the same exact issue.

no more help??? i Flashed my using cwm.6051.t679 + cm-10.2-20140627-UNOFFICIAL-ancora_tmo.zip everything done fine, but when i try to Flashed cm-12.1-20160326-UNOFFICIAL-ancora_tmo.zip i got a message saying "Encryption Unsucessful" and reboot, after reboot i try (New OS2SD-TWRP 2.8.5.0) and Flashed again, reboot then TWRP blue screen never gone! try odin mode:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "preload.img.ext4"
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/4 Finished.
<1> adsp.mbn download..
<1> 2/4 Finished.
<1> boot.img download..
<1> 3/4 Finished.
<1> cache.img.ext4 download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
after rebooting TWRP TWRP TWRP TWRP!!!!!!! again!!
update: i try do again again again again again again again, finally i download another Ancora.ops file, now everything back to normal!!! Ancora.ops file come with uvlg3.odin.zip is WRONG!!
download Ancora.ops from here:
https://docs.google.com/file/d/0B2e_XGOiZowOdTRQYUZjQmVlX3c/view

I had to install Ubuntu on an old hard drive and install the free virtual machine version of windows 7 from Microsoft into virtualbox . Just to get the drivers to work and to be able to flash the device in download mode. Just a tip for getting it into download mode. Plug in the usb cable, get the charge screen up and power it on, and then hold down the volume button. Keep doing this and eventually it will jump into download mode. Once you do that follower other peoples instructions for Odin here. This is what I had to do because I was using Windows 10 but you can completely legally and for free setup a virtual box of windows 7 in Ubuntu to fix stuff like this. It took me a week to find that out.
So my Exhibit is now working like brand new. I just think I should learn how to swap the external drive for the internal because the storage capacity is very small.