[SOLVED] Please Help to make Samsung S i9000 works again - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi, I know you may get bored with my post, but after a week struggling I really ask for some experienced tech to be so kind to guide me to install a valid ROM and kernel.
I've rooted this Samsung i9000 and was working but then followed some post where it said that we should/could re-install a secure kernel. So then I found this post (pdf instructions) where there was a ROM and kernel, that I installed and now the phone has this small 'r' near the signal strength like when you are in roaming (cannot be deactivated as it's not activated in settings) and the wifi will never connect to my router, and 3G never works.
For the last week I've been trying to re-install all ROMs I can found in the forum compatibles, and for that placed it in the sdcard, rebooted in recovery mode, wiped the cache and selected install from sdcard, install:update.zip, tried all the options and always says that can't found update.zip (it is in the root of the sdcard.)
Phone info:
Firmware version: 2.2.1
Baseband: I9000XXJVE
Kernel version: 2.6.32.9 [email protected]_8_2#1716
Build number: EZbase v2.00
Apps:
ROM Manager
Superuser
Thanks in advance

Hey
Have you tried through odin??
Like upgrade to 2.3.6 root it and then flash a rom..
Sent from my GT-I9000

go to samfirmware, there u can find plenty rooms as also as full instalation guides with all stuff u will need to.
GL

OK follow the in this website and use the new sourceforge mirror http://www.darkyrom.com/index.php?threads/odin-darkyrom-10-2-resurrection-gti9000.4272/
Make sure you have the Samsung drivers installed http://forum.xda-developers.com/showthread.php?t=961959/ then once that's done phone should start up if it does follow my previous instructions
Sent from my Awesome I9000 running Slim Bean
---------- Post added at 06:17 AM ---------- Previous post was at 06:15 AM ----------
Once done do you want to stay on gingerbread or go to ICS or JB ?
Sent from my Awesome I9000 running Slim Bean

Solved with F1 GalaxyNexus. Works like a charm
thank you

Related

[GUIDE] Root your Galaxy Mini/Pop with 2.3 (Gingerbread) firmware.

Well, I see lot's of questions about rooting. Here's a small guide on how to do that.
1. Download the attachment to this post. (upd_1.zip)
2. Put the file on the root of your SD-card. (Not in a folder/directory, but on the top layer.)
3. Power down your phone.
4. Enter recovery mode by holding Home+Power-buttons at the same time.
5. Use the volume key's to scroll through the menu. Select 'Apply update from sd-card'(Could be something else, but looks like this.) Use the home button to aplly function.
6. Use 'Select zip from sd card' to find upd_1.zip on your SD-card.
7. When it asks you if you wanna apply the update, select yes. Use the home button to confirm.
8. Wait for it to finish, then reboot. Your phone is now rooted.
P.S. I'm sorry, but I'm not able to make screenshots/pictures. But, it ain't that hard.
EDIT: If this doesn't work, try Doomlords way. All credits to him off course.DooMLoRD's Easy Rooting Toolkit
For gingerbread frimware you can also root withDoomlord's Easy Rooting Toolkit.
You can grab it from here:
http://forum.xda-developers.com/showthread.php?t=1321582
All credits go to DoomLord ofc!
quendil said:
For gingerbread frimware you can also root withDoomlord's Easy Rooting Toolkit.
You can grab it from here:
http://forum.xda-developers.com/showthread.php?t=1321582
All credits go to DoomLord ofc!
Click to expand...
Click to collapse
Tried it, and it didn't work... Don't know why it didn't. Got similar problems as using super one click. It almost looks like the exploit that it uses was closed by samsung. The upd_1.zip is one of the procedures that seems to be working all the time...
But, thanks anyway!
EDIT: The zip does NOT work on the XXKPI stock ROM. This does!!! Thanks!
Some doubts related to rooting !
1. I rooted my current firmware, and now planning to change the firmware (Stock ROMs only), so I should have to repeat the Process again, isn't it? (ie, applying Upd_1.zip file)
2. Does the Custom ROMs comes pre-rooted (CyanogenMod, Vanilla ROM, other ROMs etc) or should have to do the rooting process manually ?
3. Is rooting helpful to move apps like Official Facebook, Twitter, FriendCaster, Yahoo Messenger etc. to SD card? PS:- I'm not using widgets anyway.
Thank you!
Bunnybugs_007 said:
Well, I see lot's of questions about rooting. Here's a small guide on how to do that.
1. Download the attachment to this post. (upd_1.zip)
2. Put the file on the root of your SD-card. (Not in a folder/directory, but on the top layer.)
3. Power down your phone.
4. Enter recovery mode by holding Home+Power-buttons at the same time.
5. Use the volume key's to scroll through the menu. Select 'Apply update from sd-card'(Could be something else, but looks like this.) Use the home button to aplly function.
6. Use 'Select zip from sd card' to find upd_1.zip on your SD-card.
7. When it asks you if you wanna apply the update, select yes. Use the home button to confirm.
8. Wait for it to finish, then reboot. Your phone is now rooted.
P.S. I'm sorry, but I'm not able to make screenshots/pictures. But, it ain't that hard.
Click to expand...
Click to collapse
bull**** man
i rooted my phone my market disappeared now my application downloaded from market even are not working
now i unrooted my phone
i went to manage application and saw the apps
market disappeared and there is only market feed\back agent and market updater left please help
Well, you must have done something wrong then seems that flashing google apps solves it. Not sure. Maybe worth a try?
P.S. Hundreds of people rooted their phones this way... So callin' it bull**** while you made a mistake is pretty lame...
Sent from my Samsung Galaxy Mini using XDA-Premium.
Bunnybugs_007 said:
Well, you must have done something wrong then seems that flashing google apps solves it. Not sure. Maybe worth a try?
P.S. Hundreds of people rooted their phones this way... So callin' it bull**** while you made a mistake is pretty lame...
Sent from my Samsung Galaxy Mini using XDA-Premium.
Click to expand...
Click to collapse
so what do i do?
i installed it from here
http://forum.xda-developers.com/showthread.php?t=1255305
---------- Post added at 11:40 PM ---------- Previous post was at 11:02 PM ----------
did it
thanks to all for support
bye cya adiyos
coolsandie said:
Some doubts related to rooting !
1. I rooted my current firmware, and now planning to change the firmware (Stock ROMs only), so I should have to repeat the Process again, isn't it? (ie, applying Upd_1.zip file)
2. Does the Custom ROMs comes pre-rooted (CyanogenMod, Vanilla ROM, other ROMs etc) or should have to do the rooting process manually ?
3. Is rooting helpful to move apps like Official Facebook, Twitter, FriendCaster, Yahoo Messenger etc. to SD card? PS:- I'm not using widgets anyway.
Thank you!
Click to expand...
Click to collapse
1. Yeah...
2. Not always... Depends on what rom, and on what the dev wanted to achieve...
3. Not sure. But lots of usefull apps need root acces...
Sent from my Samsung Galaxy Mini using XDA-Premium.
does it work for other GB versions?
Hi, I have GB 2.3.6 and i want to root it, will it work in this version? and IF there were newer version of GB , will it work too?
UPDATE: no, it doesn't work... so can anyone figure out how to root GB 2.3.6?
Mikeeryza said:
Hi, I have GB 2.3.6 and i want to root it, will it work in this version? and IF there were newer version of GB , will it work too?
UPDATE: no, it doesn't work... so can anyone figure out how to root GB 2.3.6?
Click to expand...
Click to collapse
try doomlord root. work for me
I've added the link to Doomlords Easy Rooting Toolkit to the first post.
cant root after updateting to 2.3.6
Hi
i just updated my mini to 2.3.6 using kies. My phone was rooted before but after the update it has unrooted ... i tried the DooMLoRD tool kit ... didnt work at all
pls help me with the rooting ... i m not a expert
kernel version
2.6.35.7-perf-CL727859
[email protected]#1
Have you tried upd_1.zip method?
Sent from my GT-S5570 using xda premium
yap tried that ... it seems it works on 2.3.4 .... mine is 2.3.6
finally rooted the phone ... check the blog
yagyagaire.blogspot.
I am new to android phones, but not to Linux, other Os's and computers. Few days ago i bought mini, and today i upgraded firmware to gingerbread, and rooted with doomlord. it all worked fine, except that after upgrade samsung home launcher repetedly crushed so i needed to do a factory reset. i did backup before so no data lost. That's it.
I just wanted to say that doomlord worked for me.
just rooted my samsung mini in less then one minute , thanks
custom rom
custom rom to install after root
root to gingerbread 2.3.6 does not work
Root for galaxy mini with gingerbread stock rom 2.3.6 does not work, not even with downlord or with the udp_1.zip method... is there another method to root it?.
susubiskut said:
custom rom to install after root
Click to expand...
Click to collapse
You don't need to root your mini to install custom ROMs... as they comes pre-rooted
You can start with emanoN ROM... its still the best choice for me...
---------- Post added at 05:22 PM ---------- Previous post was at 05:17 PM ----------
angello_df said:
Root for galaxy mini with gingerbread stock rom 2.3.6 does not work, not even with downlord or with the udp_1.zip method... is there another method to root it?.
Click to expand...
Click to collapse
Try this link :
"http://yagyagaire.blogspot.in/2011/12/rooting-samsung-galaxy-pop-with.html"
It worked for me on every GB 2.3.6 stock ROMs that I used.

[Q] Downgrading to rootable ROM in order to install custom ROM?

Hi all,
Seems like ICS will be delayed and instead of waiting for it, I've decided to install custom ROM. But before doing so, I would like a few comments from XDA SIFUs...
1.Am currently on:
Baseband ver: N7000DXKL2
Kernel ver: 2.6.35.7-N7000DXLA1
Does that means I'm now on LA1 ROM?
2.If so, i understood that it's not directly rootable, thus needed to be downgraded. Referring to Dr Ketan's information, http://forum.xda-developers.com/showthread.php?t=1424997, i would like to downgrade to:
N7000DXKL3 ------ -------2011 December-------- N7000OLBKL2
Will that be...KL3 or KL2?
3.Once downgraded using Odin, will it increase the flash counter?
4.After downgraded, can I just use Zergrush exploit method to root my phone?
5.Which custom ROM is recommended?
Thanks in advance...
Regards,
SiLvErBoLd17
silverbold17 said:
1.Am currently on:
2.Will that be...KL3 or KL2?
3.Once downgraded using Odin, will it increase the flash counter?
4.After downgraded, can I just use Zergrush exploit method to root my phone?
5.Which custom ROM is recommended?
Click to expand...
Click to collapse
1.You hav not mentioned build version, basically that is your ROM
2.You have showned is KL3, but i recommend this to downgrade
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India
3. this stock ROM, which won't raise counter
4.yes, n if you downgrade to above said ROM (which i hav recommend), select ' I have kernel KL1' N follow procedure from thread 'How to Root..."
5.Sorry here, I never tried any custom ROM
scourgeofgod said:
Hi ketan,
I received my SGN yesterday and right away the phone updated itself to LB2 (India).
I felt the need to root immediately to shift my apps from my older custom romed galaxy ace to SGN.
I read up your guide and rooted through odin (PC) which rooted my kernel down to the KJ1 version. After the customary reboot everything seemed ok - it showed superuser+CWM in app list. Then the pixellated screen began appearing after the screen off. I could only come out of it by removing battery.
On searching these forums i found some posts on pixellated screen caused by certain custom kernels in SGN. I thought that may be the kernel was being incompatiable with my SGN hardware . Then i downloaded the latest stock rom (LC1 - open europe) and tried flashing the new rom using CWM - but surprisingly the CWM prompted for the CSC file only in the firmware folder.It didnt ask for code and modem files. Still i went ahead with the installation and the CWM installed the new rom with apparently no problems - still the kernel is showing KJ1 after this and again the pixxelation problem is still there.
Iam no expert but i think the kernel KJ1 is the problem
(my baseband version is XXLB2)
Present status
Android version 2.3.6
Kernel Version 2.6.35.7 - ....KJ1 -CL627135
Build number GB.XXLC1
Can i retain my root and upgrade my kernel and get rid of this pixxelation problem ?
Is there an good way to do this ?
Click to expand...
Click to collapse
If you need a full stock rom you must flash through odin.Flashing through CWM will keep the kernel the same so you have the problem continuing.Flash the rom using PC odin and the problem will be solved
scourgeofgod said:
Can i retain my root and upgrade my kernel and get rid of this pixxelation problem ?
Is there an good way to do this ?
Click to expand...
Click to collapse
Downlad this
Extract
Run alreadt rooted
Check unknown sources on, USB debugging On
- connect device
- press any key to start
it shud b finish in few seconds
Report back if still error
GudLuck!
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
vijai2011 said:
If you need a full stock rom you must flash through odin.Flashing through CWM will keep the kernel the same so you have the problem continuing.Flash the rom using PC odin and the problem will be solved
Click to expand...
Click to collapse
This will erase Root, kernel can be updated later too. He has done exact correct steps, Now he just need to update kernel.
scourgeofgod said:
It worked like a charm.
Thanks a bunch , Ketan .
Click to expand...
Click to collapse
It has to
Sent from my GT-N7000 using xda premium
Thanks Dr ketan,will give it a shot with the mentioned stock ROM and report back if there's issue...thanks again!

[Q] Rooting I-9000

Please see post 3 for the 'worse' update
-------
Hello,
Just a bit of background - have had my galaxy I-9000 for 1-2 years now, had been running dramatically slow, so upgraded it to 2.3.6 (GINGERBREAD.XWJW6) & it runs a lot faster. Unfortunately, it has many more "optus apps" which I detest.
I'm looking to "reboot" the phone - which from reading some threads means "rooting" the phone. My questions relating to this are:
1. If I 'root' the phone, will my contacts/messages be retained, or is it a complete wipe of the phone
2. How exactly do I 'root' the phone? Is there a thread that shows you (I've seen threads, but they are technical, & I become confused when they start mentioning roms etc)
Furthermore, as far as I've read, after you 'root' your phone, you have to install a ROM, for example "SLIM ICS" (what's ICS stand for?)
I've also read, but I'm not sure that because the firmware I've upgraded to is relatively new - that 'rooting' is not yet available? Is this also true?
Thanks for your help =)
1. Rooting doesn't wipe anything. Maybe cache or/and dalvik cache uf you flash with cwm.
2. Look for cf-root kernel thread.
There is a step-by-step guide and the needed rooted kernels.
You will need, Odin, the kernel.tar file and the phones Downloadmode (volume down + home + power)
Sent from my GT-I9000 using xda app-developers app
Hello again,
Well my phone seems to have shat itself? It comes up with the "black screen of death," but I have been able to get to the downloadable screen.
I wanted to know how to recover it, I am no tech wizard, but this is the stuff I have:
- ODIN v1.85
Please tell me what else I need, I'm guessing a ROM?
I will be forever grateful, thanks
if you have the download mode, you have to flash properly the GB JVU, then to flash the CF root for JVU to become root and have access to CWM. then you can upgread to ICS
---------- Post added at 11:12 AM ---------- Previous post was at 11:08 AM ----------
here the link for jvu
http://www.theandroidsoul.com/xxjvu/
good luck
Thank you!
I'm following it step by step (downloading the XJVU 200meg file at the moment)
I will let you know about my progress
you need the three files, for phone, pda and csc. And you also need the pit file, and the cf_root file.
So an update!!!
Black screen of death, diverted!!! (phew)
Flashed to 2.3.6 XXJVU
Rooted it as well
Now looking for a ROM to put in...
Now because I'm on 2.3.6, does that mean I can only get the "SURFACE" ROM? What's the advantage of changing ROMS anyway?
Cheers
Tholius said:
So an update!!!
Black screen of death, diverted!!! (phew)
Flashed to 2.3.6 XXJVU
Rooted it as well
Now looking for a ROM to put in...
Now because I'm on 2.3.6, does that mean I can only get the "SURFACE" ROM? What's the advantage of changing ROMS anyway?
Cheers
Click to expand...
Click to collapse
hmm.. now u flash JW4.. coz it is better than JVU in battery life and smoothness..
and then u shud get CM9 latest nightly.. though m not on it...
but i tried it.. it's very smooth...
u can also try DOC's ICS ROM (currently i am on)..
If my post helped, don't mind hitting THANKS
Tholius said:
So an update!!!
Black screen of death, diverted!!! (phew)
Flashed to 2.3.6 XXJVU
Rooted it as well
Now looking for a ROM to put in...
Now because I'm on 2.3.6, does that mean I can only get the "SURFACE" ROM? What's the advantage of changing ROMS anyway?
Cheers
Click to expand...
Click to collapse
If you want to flash slim just go to slim website, and follow the instructions, take your time, and make sure you read and follow the instructions, any problems then post on the slim thread, I will keep an eye out for you
I'm glad for you thiolus. Cm9 or slim are good. I'm on cna by franzy and i think it's a very good rom on ics
Another update guys!
Well I flashed it, then rooted it (see now I'm using proper lingo =P) XXJVU
Then finally put on CM7 which makes everything faster, for now I think it is okay, although I think I will update it later as I want more whizzbang!
Another problem I encountered was getting all the contacts, kies saved as SPD file which wasn't recognised - had to save it as VCR/vcard file, then merge all of it together into one file - I learned how to use DOS too!
So literally 8 hours later (slept at 430 am, now its 730 =P) this is it for now, thanks everyone for helping so much
Can't post link: i46.tinypic.com/24f03gl.png
i didnt get you how to root my phone with xwjw6 firmware only,i dont want to change my firmware to xxjvu now
ksh15 said:
i didnt get you how to root my phone with xwjw6 firmware only,i dont want to change my firmware to xxjvu now
Click to expand...
Click to collapse
flash a rooting kernel, either CF Root JW6 or semaphore GB from My Android Collections

how to completely unroot galaxy s without flashing rom on a phone running stock rom

Hi,
Few days back I updated my phone from 2.3.3 to 2.6.6 using kies.
Then I flashed cf - root kernel using odin and after that i flashed semaphore 2.7.4 kernel for voodoo sound.
Until before that I have never used odin or flashed anything.And my firmware is official update through kies.ONlY my kernel is non stock.
My phones warranty period is Over.So leaving footprints of previous root and all are not so much of a concern.But I need to complete remove the root and flash back to stock kernel.
Is there any way to do it without flashing a ROM.Flashing kernels are okay.
I want to unroot because rooted phone is not of any use to me and also since I am a noob I dont want any viruses or aps accessing the root and doing undesired stuff(like messing imei and all that)
what i mean is i dont want anything to access my root(like nothing would access the root of a phone out of box)
Kindly help me with something that does not need to flash a ROM(if possible). I really get panicked at these thing.
PS: I guess doing uninstall root from that SuperSU app wont remove the root actually.
also please guide me to the "easiest"( i am a noob) yet "effective" way to backup the imei of my phone.(i9000 gt gingerbread)
You probably mean 2.3.6 not 2.6.6 but i'm not sure is it possible to completely remove root without flashing stock rom again. Otherwise you can just disable root access in super user app
---------- Post added at 09:49 PM ---------- Previous post was at 09:46 PM ----------
Oh now i remember! You can download z4root app and there's an option to remove root but i don't know does it work
justinemat said:
Kindly help me with something that does not need to flash a ROM(if possible). I really get panicked at these thing.
PS: I guess doing uninstall root from that SuperSU app wont remove the root actually.
also please guide me to the "easiest"( i am a noob) yet "effective" way to backup the imei of my phone.(i9000 gt gingerbread)
Click to expand...
Click to collapse
1) you can Flash back your original stock kernel, same version as your Rom, using Odin from here http://forum.xda-developers.com/showthread.php?t=1102881
2) you can use unrooting apps from the market or this tool from your computer http://forum.xda-developers.com/showthread.php?t=1761556 or this http://forum.xda-developers.com/showthread.php?t=1770816 many more found at my signature Collections for android
Hey
U can flash 2.3.6 again via odin...since ur new to all this i recommend u to just flash it again...yet the choice ia all yours...
Cheers
If I Helped, dont mind Hitting the Thanks button...
For a beginner it would be better to just flash Stock Rom via Odin
Sent from my GT-I9001 using xda app-developers app

[Q] Rocketrom JB Qeustion.

Hi there,
I got a problem with this rom I dont know if it is something eybee1970 write in it so i can't go to another rom but its frustrating.
I want to go to de paraniodandrod rom but everytime i want to flash, after a full wipe of all, it gives me the error status 7.
It has something to do with version check i think.
How can i fix this because i dont want to be stuck on this rom..
I also have the same problem if i want to flash to Rocket MIUI rom not only the PA rom.. same error same problem.. I formated all the disks fixed primissions many times en read the logs after every action...
Hope you can assist me in this.
Thanks
Greetz
Mike,
go back to gb or ics usin pc odin and flash pa from there
Status 7 usually means it's the wrong file.
Are you sure you still have full root ??
nokiamodeln91 said:
go back to gb or ics usin pc odin and flash pa from there
Click to expand...
Click to collapse
Is there a good tutorial for odin uses.. never used it..
Oh Yeah
http://forum.xda-developers.com/showthread.php?t=1424997
numbnutsuk said:
Status 7 usually means it's the wrong file.
Are you sure you still have full root ??
Click to expand...
Click to collapse
Yes, even reroot it..
I've done some searching and its either the zip file is corrupt. Or other with this problem have reported that updating cwm to the newest available and then flash fixes this problem.
ie flash another kernel. Bear in mind you'll have to keep a copy of the phills jb to ree flash if it doesn't work cos rocket Rom probably won't load without it.
Hope this helps
numbnutsuk said:
I've done some searching and its either the zip file is corrupt. Or other with this problem have reported that updating cwm to the newest available and then flash fixes this problem.
Hope this helps
Click to expand...
Click to collapse
if hes on the JB eybee ROM, i believe hes already on the latest CWM v6
Yeah your right their but I'm guessing if you flash another kernel reboot into recovery and flash a new Rom it will work. Other people with this problem with error 7 report changing cwm /kernel and it flashed.
Edit. I wonder if lots of other people will experience this issue now cos i haven't even though about flashing another Rom yet from rocket Rom JB lol
Let us know what works for you.
i guess i have read a few more threads with the same issue. on JB .. then tried to install CM9 or Black CNA and it dint work.. then OP moved to stock rom and then flashed the rom
---------- Post added at 01:19 AM ---------- Previous post was at 01:10 AM ----------
like this one.. http://forum.xda-developers.com/showthread.php?t=1962219
not rocket rom thou but the XXLS2
I'm happy with rocket jelly bean so i guess I'll find if i get this problem in a week or two lol
Didn't face this problem coming from odexed jb leak to rocket Rom deodexed jb thou....
hi guy's when running odin and when hitting start after doing the tutorial noticed above. it will crash on me every single time.
any idea's ?
what crashed? odin? Which odin are you using? 1.85?
download odin and drivers from that tutorial itself and try
---------- Post added at 02:53 AM ---------- Previous post was at 02:53 AM ----------
and try running odin as administrator
Does it connect to Odin when you plug the phone in.
You should see the box turn color and say 'comms 09' or something like that
yes it connects comm 7 i get.. and i use 3.04.. really strange.. but im now downloading a new kernel.. going to flash that then reflash another rom.. let you guy's know
omg.. thats strange he.. when installing the new kernel. N7000XXLRQ it will run and right after that i saids installation aborted.. any one of you know which kernel the choice ?
are you trying to install the kernel from cwm?
Good news. installed Kernel Hydra 5.4 and it is flashing as i speak..PA... Thanks guy's really a kernel problem this..
Good to see i was right. Glad to see it fixed your problem.

Categories

Resources