PLEASE HELP, Computer is not recognizing my Galaxy S - Galaxy S I9000 Q&A, Help & Troubleshooting

Just got my phone into download mode after using the jig, and i have been able to connect to my pc before i seriously F'd my phone by messing with a setting in cwm. I have downloaded and redownloaded drivers from samsungs website, along with installing Kies and that does not recognize my phone. (also i would like to add i am unable to access the phone since it wont turn on without the jig, without jig it just goes into a boot loop.)
THis is what happens when i plug my phone into the computer:
plug in usb (to computer and phone)
let it do its thing to recognize device...
pop-up stating "unknown device" so i click it.
then right-click the unknown device which opens up another window
from this menu it shows Install driver, Update driver and 3 other options.
when i press install driver and update driver, it tells me that the driver is already installed in "device unknown."
At this point i throw computer at wall after 2 days of trying to figure this out.

so messed around and the problem only happens when it is in download mode. but when it is not in download mode it shows up but no use to me because i am trying to flash it to stock. soo i dont know why the error 43 only shows up when in download mode. any help would be great.

sean.hunt said:
so messed around and the problem only happens when it is in download mode. but when it is not in download mode it shows up but no use to me because i am trying to flash it to stock. soo i dont know why the error 43 only shows up when in download mode. any help would be great.
Click to expand...
Click to collapse
Just follow this to update the drivers http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 , same thing as what you have done earlier but this time , when it searches for new drivers, you can do the selection for it.
But first reboot your PC after pulling out power cord ...and try the quick solutions first

Ok sen, so i tried to install the driver manually but i am stuck at the part where i have to install something on my phone to allow it to sync with the computer, since my phone will not even boot up. I am starting to think my dear Capi is going to be a paper weight =(

Related

Please help...big problem....

Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Did you flash anything to it or root it?
riwarren said:
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Click to expand...
Click to collapse
Hi Rick. Try to re-install samsung usb drivers. during this time, take out the battery from the phone. once finished installing the drivers, put back the battery into the phone. Go into downloading mode. Fire up odin, put in the necessary firmwares + pit files. Once done, then CONNECT your phone to the usb port of your computer.
Hope it's okay.
Edit: Let's hope that it is the computer usb drivers are corrupted. Alterntively, if you still can't do it, try it on another pc.
Nope. I was rebooting it to flash XXJPC to it, but couldnt do so because it was saying that USB message and wouldnt detect it. So I went into recovery, did a factory reset, and now it wont boot.
Another computer does the same thing *tears*
*BUMP*
Lets try a different route. I will pay a generous sum of money to anyone who offers to and does manage to fix this for me?
rick, looking at this, if your usb is not recognised, it is either the pc or the phone usb port might be damaged.
if it is a hardware issue, then use the bounty to get it fix.
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
richan90 said:
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I can get into download mode just fine.....my pc just doesnt recognize the usb device. tried 3 differente pc's, 2 running win7 and one running xp.
Did you install usb drivers on each of the machines?
Sent from my GT-I9000 using Tapatalk
I installed the samsung USB driver executable. and I also tried to use those drivers that it installs to manually update the "unknown USB device" in device manager, but they won't take.
Try uninstalling all drivers, then stick a MicroSD in your phone before plugging it into the usb.
Assuming you have Samsung Kies in your PC, try to upgrade it at 1.5.1.10074_45.
How long do you wait the boot?? The first boot after flash is very long, wait at least 5 minutes with flashing "S".
I did not just flash anything. My phone got really hot and laggy (as I was using it while charging it via USB port) and so I rebooted phone in an attempt to resolve the lag. when I did, it would not go past the WHITE Samsung Galaxy S I9000 screen, does not get to the flashing S screen.
bump
please anyone able to help?
riwarren said:
bump
please anyone able to help?
Click to expand...
Click to collapse
if i understood you correctly, you have two separate problems:
a) your phone does not boot up
b) your phone is not recognized by any computer when plugged in
could be a coincidence, but probably is not. i'm guessing your bootloader got screwed up somehow. if it is a coincidence, it could be that your usb port on the phone is effed, or your usb cable is dead. try first using a different cable and see if your phone can be recognized by any computer. perhaps then you can go into download mode and reflash.
also, have a look at this post, might help you (although, if your usb is effed, there's not much point in trying any solution that involves your phone being connected to a computer): http://androidforums.com/780720-post3.html
EDIT: also, have your tried the obvious stuff, like pulling battery?
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
That post you linked, is worth a try. But its for a motorola.....Where do I get my SGS bootloader to use instead?
ohh you were implying to try to use the motorola usb drivers?
bouzoubaa said:
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
Click to expand...
Click to collapse
I never said anything about a white screen. and I am not uneducated on flashing SGS, or using Odin. Far from it. My phone was first showing USB symbol when it wasnt plugged into USB port, then phone started running really hot while charging and got really bloated like it was overheating. So I rebooted and its now force closing at the first boot animation. I can get into download mode and recovery, but will not recognize in any of the 3 computers all running different versions of windows on them, with either of my USB cables that I tried.

[Q] UPDATED: ODIN wont recognize my phone with USB debugging on, but will without it

Alright, so I was having some problems with my cognition rom and decided go back to stock so I could flash the new cognition. I put my phone into download mode, and it took a few times for ODIN to see my phone. After I got ODIN to see my phone I tried to master clear, it did not work. I had to pull the battery out and try again. I rebooted my phone again, and many program errors came up. I shut off my phone, tried to get into download mode and it wouldn't let me using the volume down + up then insert USB with ODIN open.
Now to get into download mode I must hold buttons with battery out, put USB in, and put battery in and I get download mode instantly, but I cant get ODIN to recognize my phone at all anymore. I tried many different methods(odin open before DL mode, odin closed before download mode, etc). I looked through a few threads and couldnt find anything that would work. Also my window 7 64 now says it doesn't recognize the USB device when I plug it in. Whats going on with my phone?? Im getting very annoyed! Is there any way to go back to stock besides ODIN??? Any help is appreciated!!
***UPDATE***
Seems like I may have a 3 button combo lock, and no USB support of any kind(besides charging).
UPDATE: I used rom manager to flash over my old rom. My phone works again, but it wont go into download mode at all now. Only when I use the cognition menu to send it to download mode will it work. I still cant get ODIN to see my phone. I want to go back to stock still, but without ODIN working, can I?
ziphoward said:
UPDATE: I used rom manager to flash over my old rom. My phone works again, but it wont go into download mode at all now. Only when I use the cognition menu to send it to download mode will it work. I still cant get ODIN to see my phone. I want to go back to stock still, but without ODIN working, can I?
Click to expand...
Click to collapse
under your captivate battery, there is a number like 1008, 1010, what is yours?
I've had the same trouble with download mode + odin on my Windows 7 64 bit pc too.
I have to have odin running, phone off with battery out, and usb cable in. I leave the battery out for about a 10 second count. Then put the battery in and hit all the buttons at the exact same time (power + volume up and down). The key here is that I only had to hit all three buttons momentarily to get it to go into download mode. I didn't have to hold them down for any length of time.
I easily spent 1 hour trying to get odin to work the last time I had to reflash to stock. Only because I forgot how hard it was three last time with my 64 bit machine.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
mengbo said:
under your captivate battery, there is a number like 1008, 1010, what is yours?
Click to expand...
Click to collapse
1006
So should I just keep trying to get into ODIN by just fiddling around with it? Ive tried an XP machine and it wouldnt work either. Does booting into download mode from the cognition power menu any different than entering download mode the manual way? Every time I put the battery in with the USB it takes me to the battery charger screen. At first with that issue, putting in the battery last while holding down volume up and down, would put the phone into download mode(as opposed to the normal ways of getting into download mode). Now that wont even work at all.
first you can try the 3 button fix, just search the forum for that.
you may need to build a jig or buy one online just in case, it will get you into the download mode easily.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
im having horrible trouble with adb cmd. I installed the samsung drivers, put my phone in usb debugging, did some tutorials on how to install sdk correctly, went to the correct file paths in cmd promt, and still cant access the adb shell. Any pointers on this?
Also, could I wipe all data off internal storage and use the "reinstall package" option in recovery mode to use rom manager update.zip to restore my rom from my sd card? Im not sure if thats possible. Im getting errors with my rom, and it feels slower since I just reinstalled over the top of my faulty rom.
Seems the only usb function I have right now is to charge it. Hmmm USB brick?
Any help out there???
3g stopped working on my phone when I woke up. I really need to get a fresh rom installed.
If I recall correctly, the path to where adb is had changed. Check all folders inside the sdk folder. to make my life easier, I put the sdk folder right into the root directory (c and renamed it sdk. Don't know if that well help or not...
Sent from my SGH-I897 using XDA App
I changed the folder to androidsdk from whatever it was.
bueller bueller bueller...anyone?
Well, if your phone is a rev 1006 you "should" have a problem like losing your button combo. I guess that could have happened but I doubt it, I've got a 1007 and never lost it.
So, as for ADB here's what I do. Take the android SDK folder you downloaded and look inside it. There is a folder called tools. I take the tools folder and copy it to the root of my C: drive. Make sure you have all the drivers loaded, speaking of which I would uninstall and reinstall the drivers. Sounds like they flaked out for some reason. Next open up a cmd window, Start > Run > CMD.
Then type,
cd /
cd tools
adb devices <<this shows if your phone is recognized. if it is...
adb reboot download
*or
adb reboot recovery
*or
adb shell
For what it's worth, I have been flashing my phone since I got it in July and the only time I Master Clear is when I have had a problem like a soft brick or something that I was suspicious about the data on my internal SD. Which, so far has been maybe 3 times. I don't think necessary to Master Clear every time you flash to stock.
Also, you shouldn't really have to the pop out the batter to do the download mode trick. I turn my phone off, hold both Vol up and down, then plug in USB and I'm in download mode.
bobbylx said:
Well, if your phone is a rev 1006 you "should" have a problem like losing your button combo. I guess that could have happened but I doubt it, I've got a 1007 and never lost it.
So, as for ADB here's what I do. Take the android SDK folder you downloaded and look inside it. There is a folder called tools. I take the tools folder and copy it to the root of my C: drive. Make sure you have all the drivers loaded, speaking of which I would uninstall and reinstall the drivers. Sounds like they flaked out for some reason. Next open up a cmd window, Start > Run > CMD.
Then type,
cd /
cd tools
adb devices <<this shows if your phone is recognized. if it is...
adb reboot download
*or
adb reboot recovery
*or
adb shell
For what it's worth, I have been flashing my phone since I got it in July and the only time I Master Clear is when I have had a problem like a soft brick or something that I was suspicious about the data on my internal SD. Which, so far has been maybe 3 times. I don't think necessary to Master Clear every time you flash to stock.
Also, you shouldn't really have to the pop out the batter to do the download mode trick. I turn my phone off, hold both Vol up and down, then plug in USB and I'm in download mode.
Click to expand...
Click to collapse
Im having USB driver problems, windows 7 will not recognize my phone. I think this is why adb wont recognize my phone correct? I can only get into download mode now but using the power menu thats custom from Cognition. Is my phone screwed?? Can I flash a ROM without ODIN?
ziphoward said:
Im having USB driver problems, windows 7 will not recognize my phone. I think this is why adb wont recognize my phone correct? I can only get into download mode now but using the power menu thats custom from Cognition. Is my phone screwed?? Can I flash a ROM without ODIN?
Click to expand...
Click to collapse
Like I said, have you tried uninstalling the drivers from windows and reinstalling them? I am running Win 7 x64 and have had that happen. After i flash a rom or flash to stock sometimes windows doesn't recognize my phone at all. The first time I just used my laptop to flash but the second time I uninstalled the drivers and reinstalled. It's also important that you plug into the USB ports directly on the motherboard on the back of your PC. There are known problems when trying the front usb ports or through a hub.
bobbylx said:
Like I said, have you tried uninstalling the drivers from windows and reinstalling them? I am running Win 7 x64 and have had that happen. After i flash a rom or flash to stock sometimes windows doesn't recognize my phone at all. The first time I just used my laptop to flash but the second time I uninstalled the drivers and reinstalled. It's also important that you plug into the USB ports directly on the motherboard on the back of your PC. There are known problems when trying the front usb ports or through a hub.
Click to expand...
Click to collapse
Ive tried uninstalling and reinstalling many many times. I am using a laptop and ive tried all the USB ports but still no luck. I hate having my phone like this, it will drive me insane until its fixed.. or officially considered usb bricked.
ziphoward said:
Ive tried uninstalling and reinstalling many many times. I am using a laptop and ive tried all the USB ports but still no luck. I hate having my phone like this, it will drive me insane until its fixed.. or officially considered usb bricked.
Click to expand...
Click to collapse
Just curious, is it a Dell laptop? My Dell never recognizes my phone unless I power the laptop on with the phone/USB plugged in. If the laptop is on, and I plug phone in it never works, so I leave it plugged in and reboot and it works. It drives me crazy, but whatever it's my work PC.
bobbylx said:
Just curious, is it a Dell laptop? My Dell never recognizes my phone unless I power the laptop on with the phone/USB plugged in. If the laptop is on, and I plug phone in it never works, so I leave it plugged in and reboot and it works. It drives me crazy, but whatever it's my work PC.
Click to expand...
Click to collapse
It is a dell actually, but I just tried your method and it didnt work for me. Thanks for the input though!
Alright, I downloaded kies mini today and it actually installed some drivers correctly. I was able to pull up my internal drive on the computer, but it wouldn't read it. I was able to get ODIN to see my phone(first time in weeks), but it only shows up when my phone is NOT in debugging mode. So im assuming Master Clear will work now. I was using AIO captivate tool box, and my phone rebooted at the click of the button into download mode, but once again it wont see my phone in ODIN while in download mode. Im getting closer!
Why wont ODIN recognize my phone with USB debugging on? Any more suggestions on how to make this happen?

[Q] Windows No Longer Recognizes Captivate

Hello all, I am turning to the Forums since I have spent 5 hours trying to resolve my problem.
Earlier today I installed Kies Mini on my computer in anticipation of the official AT&T Froyo. However, now my computer no longer recognizes my phone at all. It does not show up in the Device Manager, or anywhere.
I tried Uninstalling Kies Mini, Uninstalling the Drivers, Rebooting my phone. etc, etc. But Windows still will not recognize the phone as attached. It worked in the past and I would like for it to work again.
I am currently running Windows 7 64 bit. My Captivate is running Cog 3.4.
Try this:
Uninstall Kies Mini and all Drivers
Reinstall Kies Mini
Once installed turn on USB debugging on your phone and then plug it in, let it install all of the drivers.
Unplug your phone and shut it down
Once shut down activate download mode (hold up and down volume and plug in the USB) again it will install more drivers.
Once this is done unplug your phone, remove the battery and turn it back on, then restart your computer.
Uninstalled Kies Mini, and Samsung Drivers. Reboot
Installed Kies Mini.
Attached Phone to Computer. Nothing.
Also, Tried to Just boot my phone into Recovery Mode. But only boots into Clockwork Recovery. Can't Log into Stock Recovery
Update: Tried hooking up the phone to my XP machine. No Joy. XP did not recognize the device or try to install drivers.
Did you enable debugging?
Sent from my SAMSUNG-SGH-I897 using XDA App
Yes, I placed it in Debug mode. When I plug in my Phone my Title Bar Shows the USB Debugging Android indicating that USB Debugging connected, the USB icon that says Copy files to From Computer. If I click on USB, it gives me the Green Connect Android, then the Orange One. But none of my computers recognize a USB device as connected.
I have tried it with Three different cables. I'm thinking that somehow the phone is not sending some message to Windows saying "Hey, I'm connected"
Did you use the correct drivers for the phone? Can't recall of the top of my head if I can use the standard captivate drivers for windows if your on cognition..
Sent from my SAMSUNG-SGH-I897 using XDA App
I am having this exact same issue - only I updated from JH7 to Official 2.2 (for ****s n giggles) and now pc no longer recognizes phone. Went through the uninstall and reinstall and reboot.... no luck. I've never had this issue before...... ever.
I have tried almost everything i can think of. Anyone have any suggestions?
Sent from my SAMSUNG-SGH-I897 using XDA App
Not in device manager
I have what appears to be a soft brick. I was running the i9000 drivers. I was trying to install the i897. At first Odin recognized my phone and I began to download. The Odin bootloader flash failed. No my computer (Win 7 64 bit) does not even see my phone. Nothing in device manager, not even an unrecognized device.
I can get my phone into download mode. Does anyone have an idea how I can get windows to see me again?
From my experience as long as you are in download mode and have odin opened up it when you connect it, odin should find the phone no problem for you to be able to flash something new to it.
davncari said:
I have what appears to be a soft brick. I was running the i9000 drivers. I was trying to install the i897. At first Odin recognized my phone and I began to download. The Odin bootloader flash failed. No my computer (Win 7 64 bit) does not even see my phone. Nothing in device manager, not even an unrecognized device.
I can get my phone into download mode. Does anyone have an idea how I can get windows to see me again?
Click to expand...
Click to collapse
Have you rebooted the PC? Try to reinstall the drivers again. I had to reinstall the nexus s drivers but I have read some need to reinstall kies to get the drivers to work. Just keep at it. Try other USB ports. My phone wouldn't be recognized for about two weeks with trying everything. I tried new USB cables, drivers and all. Then finally it kind of worked and I went from download mode with a jig to phone!PC and then it took another reboot of the laptop and phone was able to get flashed again via the phone!PC screen. Just keep trying is all I can say.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted

O2X wont connect to pc as APX device (help needed please)

So I tried to root my phone, it worked, and I wanted to oc it. I used ROM Manager, and bricked my phone, since I installed a program (dont remember what its called) that turned my phone into EXT4, when it needs to run on EXT3 or something. So now its stuck at the LG/ LG with loading bar screen and cannot turn on. I'm trying the flash it with nvflash, but it wont work. I got my phone into APX Device mode once, but I failed and had to try again. But now, my computer won;t recognize my phone and I think I'm doing something wrong, because it wont show my phone as a APX Device. I'm obviously new to this so help would be appreciated.
GhostRai said:
So I tried to root my phone, it worked, and I wanted to oc it. I used ROM Manager, and bricked my phone, since I installed a program (dont remember what its called) that turned my phone into EXT4, when it needs to run on EXT3 or something. So now its stuck at the LG/ LG with loading bar screen and cannot turn on. I'm trying the flash it with nvflash, but it wont work. I got my phone into APX Device mode once, but I failed and had to try again. But now, my computer won;t recognize my phone and I think I'm doing something wrong, because it wont show my phone as a APX Device. I'm obviously new to this so help would be appreciated.
Click to expand...
Click to collapse
Some people have reported that they have to try repeatedly before it will start in APX-mode. So try again and again before giving up, make sure battery is out and that you firmly press both volume-buttons while plugging it in.
If it absolutely, positively cannot enter APX-mode, then your last hope is Smartflash-mode. Does it start in Smartflash mode if you hold volume-down while plugging it in?
Oh, and make sure you're connected directly to a port on the motherboard.
EDIT: You can try deleting the APX-device from the PC too, to get it rediscovered and reinstalled. Unzip the attached archive and run the batch file in it. (It sets a parameter which allows the device-manager to display hidden and "ghost"-devices before starting it.) Select "Show Hidden Devices" from the View Menu, find the APX-device(s) ("NVIDIA USB Boot-recovery driver for Mobile devices") and delete it/them. Then try to reconnect in APX-mode again. (Have the driver ready.)

Hard brick help 911

I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
herculesPh said:
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
Click to expand...
Click to collapse
Thank you for your reply but it seems you didn't read my post. My phone is not recognized by any pc.
What is the terminal command to restore a backup? That's pretty much my last ditch effort.
Well I broke my recovery so I'm screwed. I contacted Samsung and they said they would service it for free. Wish me luck.
What would cause the phone to stop being recognized by the PC? I narrowed it down to the MTP software or the micro usb charge port. My Windows computer says Device Descriptor Request Failed. Linux box does nothing. No USB devices are listed when I run lsblk.
weinerwad3000 said:
I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Click to expand...
Click to collapse
you can try this code and test if it work
*#0808#
Familiaaa said:
you can try this code and test if it work
*#0808#
Click to expand...
Click to collapse
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
weinerwad3000 said:
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
Click to expand...
Click to collapse
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
jubei79 said:
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
weinerwad3000 said:
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
Click to expand...
Click to collapse
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
jubei79 said:
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
Click to expand...
Click to collapse
I've tried 4 different cables. My wife's S5 works perfectly fine on all computers. I have tried in Windows 7, 8, 8.1, and 10. I've also tried in Linux Mint. It used to work until I installed MOAR Rom. Windows says Device Descriptor Request Failed. Linux doesn't do anything when hooked up. lsblk doesn't show the device either.
I have a bit of an update. Apparently something happened with all my data cables. I hooked up my wife's phone the other day and I was all of a sudden receiving the same error as the note 5. I went out and bought a new data cable and now her phone connects again. I'm waiting for the Note 5 to charge up so I can try Odin. I'll post back my results.
I apologize to those who told me it was the cable. I just didn't see that it was conceivable that all 4 of my data cables were all of a sudden damaged. Never underestimate the ability of children to destroy every working cable you own.
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
weinerwad3000 said:
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
Click to expand...
Click to collapse
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
musab_bari said:
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
Click to expand...
Click to collapse
I ended up trying to replace the port and accidentally cut the ribbon for the LCD screen. Ended up getting a new phone.

Categories

Resources