Related
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
nycmon said:
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
Click to expand...
Click to collapse
in terminal emulator type su and then reboot recovery maybe it work
or may be you just flashed unsupported recovery
nycmon said:
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
Click to expand...
Click to collapse
I have been having the same problem recently, but not just with this rom. I have flashed many roms to my device, but it appears that almost everytime i try to flash something now, the same exact thing happens as the OP. any information on what is wrong or how to fix this would be greatly appreciated.
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
studacris said:
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
Click to expand...
Click to collapse
Sometimes this happens, but i am usually still able to use the rom after i wait for awhile. Recently it just gets stuck at the ATT logo screen and does nothing else.
HERE is a package containing JUST the ginger boots.
MAKE SURE YOU HAVE A GOOD PHONE/PC CONNECTION, FLASHING BOOTLOADERS IS THE ONLY WAY TO TRULY HARD BRICK
studacris said:
HERE is a package containing JUST the ginger boots.
MAKE SURE YOU HAVE A GOOD PHONE/PC CONNECTION, FLASHING BOOTLOADERS IS THE ONLY WAY TO TRULY HARD BRICK
Click to expand...
Click to collapse
i just tried it with a solid connection and it almost instantly said failed in the red box. now i cant turn it on or get to download mode so im pretty sure it is hard bricked. is there any way you can help me with this?
EDIT: False alarm, i can still get to download mode so i can ODIN back to stock, but i do not know if i should risk it again
Whew that was close.
You can flash to stock using a bootloader less package, that way if it fails it can't hard brick.
Then if that works, find an entire stock gingerbread package with bootloaders included, and flash that instead of just the bootloader one click. this again, will involve risk, but full Odin package seem to work better on some phones than one clicks do.
I tried to flash the bootloader again and it succeeded. i then proceeded to try and flash Fasty KK4 v1.1 and once again i was stuck at the ATT logo. For some reason with every rom i flash, when the logo pops up, it starts dim and then get bright. After it gets bright, it stays that way and it is a real pain not being able to use custom roms anymore.
If you have the GB bls just make sure you follow LL's instructions in the OP for Fasty. I had the same issue, but it was me mistake for not following the istructions properly
studacris said:
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
Click to expand...
Click to collapse
i DO get a very colorful white noise screen whenever it boots up ...the screen goes away once it fully reboots....I wondered about it but just assumed it was a quirk of the FASTY III package...
Is Rom Manager a froyo based app?
No, ROM manager is poop. Not implemented on galaxy devices properly, and won't work past eclair, and even them it was severely limited to just downloading an update.zip to your sdcard...which you could put there manually with out having to root...
FORGET ROM MANAGER EXISTS
studacris said:
No, ROM manager is poop. Not implemented on galaxy devices properly, and won't work past eclair, and even them it was severely limited to just downloading an update.zip to your sdcard...which you could put there manually with out having to root...
FORGET ROM MANAGER EXISTS
Click to expand...
Click to collapse
Really? Rom Manager helped me a lot until this Fasty III installation....even in my previous rom Fasty II it worked fine and did great for backing up and restoring backups....saved my asss a few times with those restores lol....But if this program doesn't work for fasty III what comparable program can I use?
Also I still can't intorecovery mode...nothing works...I even tried using ADB and Droid Explorer....nothing seems to get it into recovery mode...
Am I going to have to flash back to stock ROM and try reinstalling fasty iii again? This seems all so tedious lol...
OR is there a way for me to flash back to Fasty II without having to go back to stock rom? or without having to access the recovery screen?
Thank you^
All that backing up and restoring you did with ROM manager can be done in cwm recovery and that's what you should use from now on. No app needed at all.
Follow the instructions I've already provided in this thread. You'll either need Odin to flash the gingerbread bootloaders,
or to go back to a froyo firmware, first flash a froyo kernel with Odin and THEN the froyo ROM. stock isn't needed.
Recovery in a gingerbread kernel is completely inaccessible with froyo bootloaders.
studacris said:
All that backing up and restoring you did with ROM manager can be done in cwm recovery and that's what you should use from now on. No app needed at all.
Follow the instructions I've already provided in this thread. You'll either need Odin to flash the gingerbread bootloaders,
or to go back to a froyo firmware, first flash a froyo kernel with Odin and THEN the froyo ROM. stock isn't needed.
Recovery in a gingerbread kernel is completely inaccessible with froyo bootloaders.
Click to expand...
Click to collapse
Thank you for the info!
Looks like fasty III is a GB based mod after all...I guess I should read up more on the rom before installing lol....I did not expect the dev to go from froyo to gb -_-
I was thinking of using your previous post for the one click gb bootloaders only....but it seems a little iffy and I can't afford to hardware brick the phone lol...
Makes me wonder tho...is it really THAT risky to flash bootloaders? It would make things simpler if i could just flash the gb bootloaders and go from there....
the whole flash should take less than a minute, where the actual writing takes only a few seconds...but if you were to lose communication in that awful window then it would be bad day.
But that is a small window, and if you have never had connection issues you should be ok if Odin tends to be iffy, you van try heimdall I've heard that works better for some.
Still haven't tried flashing the bootloaders because i'm scared of the possibility of hard bricking my phone... If worst case scenario was to happen and it gets hard bricked....are there any options to restore that phone? or is it just paper weight after?
Also until I flash those bootloaders there is no way to back up my phone or anything?
Thanks for all ur help btw!
another issue i am having is that the phone seems pretty laggy after installing this rom...even with tegra overclock premium and tweaking it up to 1252mhz 1275mv 1100mv setting...it still seems laggy when opening sms etc....is this just the results of a bad rom install? also battery life seems crappy....even after doing the battery recalibration...of course i couldn't wipe the battery stats since i cant get into recovery...
Hard bricks are recoverable by a hardware modification known as unbrickable mod, search for user Adam outler, or go to mobiletechvideos.com they both offer this service if you're not a soldering expert.
Battery recalibration does NOTHING the stats are reset everytime you charge to 100, and besides that they don't calculate your current battery level, just what's been using it, its what's used in settings> about phone> battery use. It has nothing to do with extending battery life.
oh lol...i have been reading all these threads where people are talking about how much their battery life improved after they did the recalibration and stat wipe ....well anyways I am going to attempt the bootloader flashing...I hope everything goes well! after that I want to try reflashing the fasty III ROM...
Do you have any recommendations as far as a good ROM for teh captivate? One that doesn't lag and has good gps & battery life? I would appreciate any help you can give.
Thanks!
I attempted to root my SGS (which had stock Gingerbread Value 2.3.6) using a guide on the Snappyguides blogspot page (the system won't let me, as a newbie, post the URL).
Odin did its thing and then the Samsung Galaxy screen came up (just the white lettering, not the multicoloured animated S) and then... nothing. It just stayed like that for about five seconds, then the white Samsung Galaxy S came up again, then the blank screen ad infinitum.
I can access the download screen and I can access the recovery screen (which does seem to indicate that ClockworkMod v2.5.1.0 has been installed). The trouble is that none of the options seem to do anything.
I have tried searching the forum for similar problems and have read the sticky. The only answers I seem to have been able to find so far suggest flashing a new Rom.
Before I go this far, is flashing a new Rom really necessary in this instance? I have never done this procedure before, so I'm wary of messing things up even further. But obviously if the phone is past the point of no return as far as the stock Rom is concerned, then that'll be what I have to do.
I'd appreciate some advice before doing anything else to my phone though.
I now seem to be able to get the recovery menu options to respond, so maybe all is not lost. Have set it to root and it's currently converting to EXT4 and is about halfway through that.
I'm hoping once that's done, it'll be bootable.
If not, what do I need to do to make the SGS boot again? Is there any way of getting back to stock or can I only flash a stock rom back on?
Nope, still not booting. It just keeps going to the Samsung I9000 white lettering, stays there for five seconds, goes blank for five seconds, then the white lettering goes back and on, off like that forever.
So... anyone willing to help?
...
have a look in this thread http://forum.xda-developers.com/showthread.php?t=1225879
Lexrsk said:
have a look in this thread http://forum.xda-developers.com/showthread.php?t=1225879
Click to expand...
Click to collapse
Thanks for responding.
Sorry for being a n00b but I can't find anything in there that helps me. All I see is a lot of jargon about various roms, kernels and something called Voodoo.
I had a working phone with Gingerbread 2.3.6 Value. I added Clockworkmod via Odin. Now I can't get the phone to boot beyond the splash screen. It doesn't even get as far as the animated S, all I get is the splash screen going on and off every few seconds.
All I want is to get my phone working again, I really couldn't care less about custom roms etc.
If anyone can help this poor n00b, I'd be very grateful!
Incidentally, I've downloaded what I understand to be the factory rom for JW4 from sammobile.com - this is a 171MB zip file with just two files inside - a tar file called JW4_JW5_JW4 and a dll file called SS_DL.dll. I'm not really sure what to do with these to restore my phone via Odin. This is the kind of thing I need help with - the threads I've read so far don't make much sense to a poor confused n00b I'm afraid.
evilcartman2 said:
Thanks for responding.
Sorry for being a n00b but I can't find anything in there that helps me. All I see is a lot of jargon about various roms, kernels and something called Voodoo.
I had a working phone with Gingerbread 2.3.6 Value. I added Clockworkmod via Odin. Now I can't get the phone to boot beyond the splash screen. It doesn't even get as far as the animated S, all I get is the splash screen going on and off every few seconds.
All I want is to get my phone working again, I really couldn't care less about custom roms etc.
If anyone can help this poor n00b, I'd be very grateful!
Incidentally, I've downloaded what I understand to be the factory rom for JW4 from sammobile.com - this is a 171MB zip file with just two files inside - a tar file called JW4_JW5_JW4 and a dll file called SS_DL.dll. I'm not really sure what to do with these to restore my phone via Odin. This is the kind of thing I need help with - the threads I've read so far don't make much sense to a poor confused n00b I'm afraid.
Click to expand...
Click to collapse
I'll help u, I went through this when I was a noob and because I didn't know about xda I had to just figure a way out, I am sorry to say but u have soft bricked your phone, luckily its not hard to unbrick, here's a link to a post i made the other day with proper guides that I use often and they are noob friendly, the files u need to download are there but it 2.3.3 and it JW4 but it will be a start to get ur phone back to life,
If you like my posts hit thanks
Here the link http://forum.xda-developers.com/showthread.php?p=25572245
If you like my posts hit thanks
OK, thanks for that. I'm supposed to be asleep right now, so I'll come back to this later but thanks for helping.
But just to clarify for now - this will restore the phone to a working version of 2.3.3 and from there I can get back to the latest stock rom (2.3.6) via Kies, yes? I need to get into Kies anyway to restore my contacts from backups (as I haven't yet seen a way of restoring the backups except via Kies).
Thanks once again.
evilcartman2 said:
OK, thanks for that. I'm supposed to be asleep right now, so I'll come back to this later but thanks for helping.
But just to clarify for now - this will restore the phone to a working version of 2.3.3 and from there I can get back to the latest stock rom (2.3.6) via Kies, yes? I need to get into Kies anyway to restore my contacts from backups (as I haven't yet seen a way of restoring the backups except via Kies).
Thanks once again.
Click to expand...
Click to collapse
Yip I guess that is right. I have never tried it but yes it should work
If you like my posts hit thanks
Well, I did get it working again in the end by using a factory rom. Thanks for your help anyway, W1nst0n.
I do intend to attempt to root it again but this time I intend to do it properly.
Any suggestions on what may have caused the boot problem I had? Perhaps using a version of ClockworkMod that was incompatible with 2.3.6 Value?
evilcartman2 said:
Well, I did get it working again in the end by using a factory rom. Thanks for your help anyway, W1nst0n.
I do intend to attempt to root it again but this time I intend to do it properly.
Any suggestions on what may have caused the boot problem I had? Perhaps using a version of ClockworkMod that was incompatible with 2.3.6 Value?
Click to expand...
Click to collapse
Yeah that or the wrong root file for ur baseband
If you like my posts hit thanks
evilcartman2 said:
Well, I did get it working again in the end by using a factory rom. Thanks for your help anyway, W1nst0n.
I do intend to attempt to root it again but this time I intend to do it properly.
Any suggestions on what may have caused the boot problem I had? Perhaps using a version of ClockworkMod that was incompatible with 2.3.6 Value?
Click to expand...
Click to collapse
Check in about phone for the kernel version. for example mine is 2.6.35.7-I9000TDVJV6-CL530973
The important part is the bold text.
search the link that i posted earlier for a odin version and flash as PDA
Good luck
Evilcartman, when u wanna get me help find me on the I9000 q&a-ask me anything I got the answer thread, it where I spend most of my time.
If you like my posts hit thanks
Okay so..
I have to spend my days serving my time in the finnish army, so I am a bit clueless of the GNote scene from time to time. I ran Midnote LPF (?) ICS for quite some time and then tried to decrease my DPI. Unfortunately, this resulted in a bootloop, and I tried to fix it by factory reset. Whoop-de-doo. I cancelled it mid way though, if I remember correctly.
8 hours later I got my hands on a computer and tried flashing a firmware with pc-odin. Didn't work. Here's where I've gotten so far:
Flashing PIT and CWM based recovery v5.0.2.7
Flashing Kingdroid ICS Via CWM based recovery or AbyssNote causes phone to reboot at "Flashing /system"
Trying to flash stock GB via Odin hangs at "factoryfs.img"
Tried to reflash bootloader, no help.
Currently trying out flashing GB rom via CWM recovery.
I need quick help as I am going to a Battle-excercise for two weeks tomorrow and I'd really appreciate have my GNote working by that time..
Thank you very much in advance
EDIT: I can confirm that the partinioning guide in http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12 IS INDEED an effective guide to un-superbrick. The guide can be very intimidating for beginners, so bear that in mind. I ran into a faulty partition on the UMS folder, and repositioning it did the trick. Then I just rebooted recovery and installed KingDroid 7.0 GB and it opened like a charm.
Big chance you have a superbrick now, sending it to Samsung repair center is the only option. Search for "superbrick" in this forum. You'll find my name also
I had to send in my device and probably get it back on wednesday...with a new mainboard. On my device a recovery always ended at /system and a pc odin reflash always stopped at factoryfs.img
The last option without sending in your device is following a few threads here. Some posters were talking about a possible solution.
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Posibly meaning this.. I am trying to run this through and will post results.
Yep, that's one of the posts. This was way too complicated for me.
I've send my Note to a samsung service center and they repaired it without any costs. I only reset the binary counter to zero and (partly...because of factoryfs.img) flashed a stock rom before sending the device.
Morality said:
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Posibly meaning this.. I am trying to run this through and will post results.
Click to expand...
Click to collapse
Sounds like a superbrick. Unless you are willing to go through the partitioning experience, I recommend sending it back.
joe2316 said:
Sounds like a superbrick. Unless you are willing to go through the partitioning experience, I recommend sending it back.
Click to expand...
Click to collapse
Im not gonna lie, It was a scary as **** experience. Currently trying to install.. well.. anything.
oh
my
GOD
ITS ALIVE OH MY GOD ITS ALIVE...
the guide worked.. But definately not recommended for beginners, as the dos prompt might be quite intimidating. but the thing definately works.
I found a bad partition from UMS and just relocated it a bit. I think I lost 3gb of space (not sure, will check on that), and unfortunately it formats your INTERNAL sdcard, as i backuped my external one.. BUT WHATEVER
JESUS CHRIST IT WORKED. After following the guide, recovery needed to be rebooted and then I just installed Kingdroid 7.0 GB. The only problem that appeared was that the Samsung Logo screen lasted longer than usually when flashing new firmware. Will update OP.
Good evening!
I've around with Androids for quite some time, and today, I finally got my N7000 to replace my I9100.
I've played around quite a lot with my I9100 and was happy with the CM9 nightlies for it.
I got my N7000 today and did the following:
1. Rooted it with this method: http://forum.xda-developers.com/showthread.php?t=1501719t=1501719
2. Decided to install the latest CM9 nightly. I booted the same CWM from the tutorial above, chose install zip from SD card and... It hang. I left it for about 5 minutes and nada, nothing. I decided to shut if off and...
3. Nada. Black screen, no recovery, no battery charging, no download mode, no nada, nothing. Dead!
I'll take it this week to the nearest Samsung repair center and check how much it's gonna cost to get it fixed (if they can get it fixed at all). I don't intend to use any warranty whatsoever since I know even tough I have not voided the warranty flashing a different kernel, I did messing with it.
I just wish to know what was my mistake, so I do not do it again in the future. AFAIK I did not mess with the bootloader, so I was supposed to be safe, right?
Do I have ANY hope of getting it resurrected?
Any opinion helps!
Thanks!
marcelo.ellmann said:
Good evening!
I've around with Androids for quite some time, and today, I finally got my N7000 to replace my I9100.
I've played around quite a lot with my I9100 and was happy with the CM9 nightlies for it.
I got my N7000 today and did the following:
1. Rooted it with this method: http://forum.xda-developers.com/showthread.php?t=1501719t=1501719
2. Decided to install the latest CM9 nightly. I booted the same CWM from the tutorial above, chose install zip from SD card and... It hang. I left it for about 5 minutes and nada, nothing. I decided to shut if off and...
3. Nada. Black screen, no recovery, no battery charging, no download mode, no nada, nothing. Dead!
I'll take it this week to the nearest Samsung repair center and check how much it's gonna cost to get it fixed (if they can get it fixed at all). I don't intend to use any warranty whatsoever since I know even tough I have not voided the warranty flashing a different kernel, I did messing with it.
I just wish to know what was my mistake, so I do not do it again in the future. AFAIK I did not mess with the bootloader, so I was supposed to be safe, right?
Do I have ANY hope of getting it resurrected?
Any opinion helps!
Thanks!
Click to expand...
Click to collapse
ALWAYS flash a GB Kernel or ROM BEFORE flashing a CUSTOM ICS ROM.
Okay. Lesson learned, trust me.
Now here's the part where I feel very stupid: what's a GB kernel? Why is that a requirement for ICS ROMs? Was it not for Gingergread ROMs?
And now here's the second part where I feel even stupidier: doesn't the kernel reside on the ROM/OS part of Android? Why would the kernel, which comes AFTER the bootloader, affect the boot of the Android? Wouldn't it just screw my phone, but wouldn't it still give me the chance of flashing another ROM?
Thanks for the help.
marcelo.ellmann said:
Okay. Lesson learned, trust me.
Now here's the part where I feel very stupid: what's a GB kernel? Why is that a requirement for ICS ROMs? Was it not for Gingergread ROMs?
And now here's the second part where I feel even stupidier: doesn't the kernel reside on the ROM/OS part of Android? Why would the kernel, which comes AFTER the bootloader, affect the boot of the Android? Wouldn't it just screw my phone, but wouldn't it still give me the chance of flashing another ROM?
Thanks for the help.
Click to expand...
Click to collapse
Because of an eMMC brick bug!
Anyways to round up, my way of flashing ROMS is flashing a GB Kernel called Abyss 4.2 and then reboot recovery, from then I wipe everything then flash any custom ICS Roms. I've had my Note for almost a week now and found no problems in flashing! But it did take me 2hrs to root doing heavy research but it paid off!
The guide I followed is from here take a few moments to read and understand then you will have no troubles in rooting/flashing again!
hing98 said:
Because ICS has not been officially released on the Galaxy Notes therefore we use a GB Kernel or ROM before we flash any custom ICS ROM.
Yes it was confusing at the start but to avoid bricking you must alwaysfollow the guides given by the Developer!
Anyways to round up, my way of flashing ROMS is flashing a GB Kernel called Abyss 4.2 and then reboot recovery, from then I wipe everything then flash any custom ICS Roms. I've had my Note for almost a week now and found no problems in flashing! But it did take me 2hrs to root doing heavy research but it paid off!
Click to expand...
Click to collapse
You may want to recheck your facts....ICS has actually been officially released in many countries......
Sent from my GT-N7000 using xda premium
stoney73 said:
You may want to recheck your facts....ICS has actually been officially released in many countries......
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry was reading from another guide. Your right
---------- Post added at 01:12 PM ---------- Previous post was at 12:23 PM ----------
hing98 said:
Sorry was reading from another guide. Your right
Click to expand...
Click to collapse
Anyways its a bug that bricks your device,
you can find more information here
Cheers
I had a galaxy S where flashing process was different Wen u flash CM9 roms and if you want to get back to GB roms only way out was PC Odin and moreover you can wipe on ICS roms and install other roms. But wen i got the note the procedure was slightly different Brickin problems and moreover wen you are in ICS you can get back to GB with GB kernel only no need for PC odin. Just keep a copy of Abyss kernel 4.2 in your sd card and be sure to flash it when changing roms.....
Doesn't Franco rev3+ solve the brick bug?
Hi all,
since you're saying we have *always* to flash a GB kernel before having a factory reset, are you talking about those having the CF/Stock kernel?
I'll make it clear: as far as I know, Franco made a kernel that should avoid the brickage since its 3rd version (thread here --> http://forum.xda-developers.com/showthread.php?t=1491428). Who installed this kernel could just wipe from ICS and install any ICS ROM. Am I wrong? If so, please explain the whys.
UNBRICKED!
I too bricked my phone but after reading this guide (ABD wouldn't recognise my device so I couldn't follow it) I understood the partitions had become messed up.
I read somewhere about the PIT files.
I ODINed the ABYSS Kernal and PIT (Q1_20110914_16GB-patched) for my 16gb n7000 ticked the repartition box. It booted into CWM recovery and I used the restore and bingo.
Hey guys,
First of all, I'm new to this, so please bear with me. To cut a long story short, I attempted to install the CyanogenMod RC on my Galaxy Note N7000 today. I followed the instructions I found on the web somewhere (can't remember of it was XDA) and after attempting to wipe my device from the ClockwordMod, I appear to have bricked it.
My Note no longer gets passed the startup screen. I've tried everything I can to revive it, and I've been searching XDA all day for a solution, with little success. I've tried flashing a number of kernels, and a number of ROMs, including stock GB and stock ICS. I can still get into both Download and Recovery mode (which I'm hoping is a good sign) but when I try to flash a ROM with Odin, it gets stuck on the "factoryfs" stage.
I've tried flashing the PIT repartition file at least four or five times, but that doesn't seem to be helping at all.
Does anyone have any other ideas? I'd really just like to get back to stock ICS. I just fancied playing around with CyanogenMod for a bit, but I wish I hadn't tried. Thanks in advance for any help!
Were you on stock ICS when you did the wipe ?
Akiainavas said:
Were you on stock ICS when you did the wipe ?
Click to expand...
Click to collapse
Yes, downloaded via Kies.
I think you have fallen victim to the infamous eMMC "superbrick". Contact Samsung, they are well aware of this problem and will surely replace it for you as it's plaguing devices running their stock ICS. The problem is with their kernel and the eMMC chip to it doesnt even matter what were you trying to do.
When they do replace it - first, flash a GB rom via Odin, and then install CM9. CM9 kernel is safe and superbrick bug free. Whatever you do - never try doing a wipe/factory reset on stock Samsung ICS rom.
Akiainavas said:
I think you have fallen victim to the infamous eMMC "superbrick". Contact Samsung, they are well aware of this problem and will surely replace it for you as it's plaguing stock ICS devices. The problem is with their kernel and the eMMC chip to it doesnt even matter what were you trying to do.
When they do replace it - first, flash a GB rom via Odin, and then install CM9. CM9 kernel is safe and superbrick bug free. Whatever you do - never try doing a wipe/factory reset on stock Samsung ICS rom.
Click to expand...
Click to collapse
Yeah, I feared that was the case. The problem is, I now have the yellow warning triangle on bootup, and my "binary count" has increased to 9. Does this mean Samsung won't replace it?
if that's the case, is there any way to reset the binary count and remove the triangle in its current state?
You might try resetting the counter with a jig. I don't know if it will work in its state, but you may not have much to lose.
Sent from a guy on a buffalOOooo.
Generally - USB Jig is the only way to reset it on a bricked device.
There is one way other way though:
http://www.mediafire.com/?5bmrc6cf81w5mya
This kernel is supposed to reset binary counter, and many users reported that it actually did the trick - mind that this kernel also causes hard brick. It's a last effort for people whose devices are already bricked.
You nees to flash it via Odin, disconnect and go into recovery. At first boot you will still see the triangle - in the recovery, select reboot. Now the triangle should disappead, and binary counter should be set to "no".
Remember that this kernel causes a hard brick. Use it only if your device is already bricked and you intend to send it to Samsung. It will work only on ICS devices.
Akiainavas said:
Generally - USB Jig is the only way to reset it.
There is one way other way though:
http://www.mediafire.com/?5bmrc6cf81w5mya
This kernel is supposed to reset binary counter, and many users reported that it actually did the trick - mind that this kernel also causes hard brick. It's a last effort for people whose devices are already bricked.
You nees to flash it via Odin, disconnect and go into recovery. At first boot you will still see the triangle - in the recovery, select reboot. Now the triangle should disappead, and binary counter should be set to "no".
Remember that this kernel causes a hard brick. Use it only if your device is already bricked and you intend to send it to Samsung.
Click to expand...
Click to collapse
Thanks very much for your help. I really appreciate it.
So do you think it's worth contacting Samsung first - before trying to reset the binary - or do you think they'll refuse to replace it once they know I tried flashing an unsupported ROM?
Thanks again!
I think you might try contacting them first, just ask all the info you need without giving them the serial numbers - before you send the phone in. They might replace it anyway - they know very well it happens because of their defective kernel/emmc chip. Although i'm afraid they might find out and refuse to fix it for free.
If they turn you down, then flash the kernel and contact them again. If you're going to do it in person and they refuse cause they "remembered you" ( shocking, but it happens... ) then simply get a friend or family to bring them your phone.
Just say that Kies messed up your phone - they'll know what the problem is
Hope they'll get it fixed for you. Let us know how it went.
Akiainavas said:
I think you might try contacting them first, just ask all the info you need without giving them the serial numbers. They might replace it anyway - they know very well it happens because of their defective kernel/emmc chip.
If they turn you down, then flash the kernel and contact them again. If you're going to do it in person and they refuse cause they "remembered you" ( shocking, but it happens... ) then simply get a friend or family to bring them your phone.
Just say that Kies messed up your phone - they'll know what the problem is
Hope they'll get it fixed for you. Let us know how it went.
Click to expand...
Click to collapse
Okay, I'll do that. Thanks again for all the info! I'll let you know how I get on.
kill.i.an said:
Hey guys,
First of all, I'm new to this, so please bear with me. To cut a long story short, I attempted to install the CyanogenMod RC on my Galaxy Note N7000 today. I followed the instructions I found on the web somewhere (can't remember of it was XDA) and after attempting to wipe my device from the ClockwordMod, I appear to have bricked it.
My Note no longer gets passed the startup screen. I've tried everything I can to revive it, and I've been searching XDA all day for a solution, with little success. I've tried flashing a number of kernels, and a number of ROMs, including stock GB and stock ICS. I can still get into both Download and Recovery mode (which I'm hoping is a good sign) but when I try to flash a ROM with Odin, it gets stuck on the "factoryfs" stage.
I've tried flashing the PIT repartition file at least four or five times, but that doesn't seem to be helping at all.
Does anyone have any other ideas? I'd really just like to get back to stock ICS. I just fancied playing around with CyanogenMod for a bit, but I wish I hadn't tried. Thanks in advance for any help!
Click to expand...
Click to collapse
You may also try manual/adb repartition method described in here to revise your phone. cheers.
kill.i.an said:
Hey guys,
First of all, I'm new to this, so please bear with me. To cut a long story short, I attempted to install the CyanogenMod RC on my Galaxy Note N7000 today. I followed the instructions I found on the web somewhere (can't remember of it was XDA) and after attempting to wipe my device from the ClockwordMod, I appear to have bricked it.
My Note no longer gets passed the startup screen. I've tried everything I can to revive it, and I've been searching XDA all day for a solution, with little success. I've tried flashing a number of kernels, and a number of ROMs, including stock GB and stock ICS. I can still get into both Download and Recovery mode (which I'm hoping is a good sign) but when I try to flash a ROM with Odin, it gets stuck on the "factoryfs" stage.
I've tried flashing the PIT repartition file at least four or five times, but that doesn't seem to be helping at all.
Does anyone have any other ideas? I'd really just like to get back to stock ICS. I just fancied playing around with CyanogenMod for a bit, but I wish I hadn't tried. Thanks in advance for any help!
Click to expand...
Click to collapse
IF U CAN GET INTO RECOVERY UR NOT BRICKED OR SUPER BRICK TRUST ME I HAVE A NOTE HERE THATS BRICKED...IF INDEED ITS BRICKED U CANT GET IN ****!!! u just soft bricked it...flash stock recovery b4 tar or what ever it is
Sent from my SAMSUNG-SGH-I717 using xda premium
forest1971 said:
You may also try manual/adb repartition method described in here to revise your phone. cheers.
Click to expand...
Click to collapse
Thanks!
JB calhoun said:
IF U CAN GET INTO RECOVERY UR NOT BRICKED OR SUPER BRICK TRUST ME I HAVE A NOTE HERE THATS BRICKED...IF INDEED ITS BRICKED U CANT GET IN ****!!! u just soft bricked it...flash stock recovery b4 tar or what ever it is
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Stock recovery? Where would I find that?
The problem is, I cannot flash any ROM. It just hangs during the "factoryfs" process in Odin. When I try to install stuff via ClockworkMod recovery, it fails. Sometimes I get an error like "cannot mount (or access) /system."
JB calhoun said:
IF U CAN GET INTO RECOVERY UR NOT BRICKED OR SUPER BRICK TRUST ME I HAVE A NOTE HERE THATS BRICKED...IF INDEED ITS BRICKED U CANT GET IN ****!!! u just soft bricked it...flash stock recovery b4 tar or what ever it is
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Not true I'm afraid...
If you've damaged the eMMC chip:
- You can still get into recovery.
- You can still get into download mode.
If you did a factory reset on stock ICS kernel and can't flash "factoryfs" data because Odin gets stuck at this point, and repartitioning does not help - that's the "superbrick".
It happens because using data wipe on stock ICS kernel runs a format procedure which damages Note's defective eMMC chip. If it happened, repartitioning won't help as parts of the storage are corrupted and Odin simply cannot put data there. I seriosusly don't know how could Samsung not see that the format command introduced in ICS ( it was not present in GB, that's why GB kernels are safe ) damages the chip... didn't they test the software at all ?
Take a look here:
http://forum.xda-developers.com/showthread.php?p=28048062
This guy managed to recover his device, but what he's left with is Note with 3-4GB less storage, and remember that once the eMMC chip is damaged, it will never be completely reliable again.
Here's a guide on how to revive superbricked Note. Bear in mind it might not work though:
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
It's still best to try and get it replaced though. If Samsung won't replace it for free - then try reviving it.
Akiainavas said:
Not true.
If you've damaged the eMMC chip:
You can still get into recovery.
You can still get into download mode.
If you did a factory reset on stock ICS kernel and can't flash "factoryfs" data because Odin gets stuck at this point, and repartitioning does not help - that's the "superbrick".
It happens because using data wipe on stock ICS kernel runs a format procedure which damages Note's defective eMMC chip. If it happened, repartitioning won't help as parts of the storage are corrupted and Odin simply cannot put data there.
Take a look here:
http://forum.xda-developers.com/showthread.php?p=28048062
This guy managed to recover his device, but what he's left with is Note with 3-4GB less storage, and remember that once the eMMC chip is damaged, it will never be completely reliable again.
Here's a guide on how to revive superbricked Note. Bear in mind it might not work though:
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
It's still best to try and get it replaced though. If Samsung won't replace it for free - then try reviving it.
Click to expand...
Click to collapse
Yeah, I'm certainly going to speak to Samsung over the next few days. I'm going to wait a little while for my JIG to arrive and try to remove the binary count, then I'll give them a call. I don't see how they can refuse to replace it really —*it is their software that caused this (I think).
Keeping my fingers crossed.
Thanks for all the advice, guys.
kill.i.an said:
Yeah, I'm certainly going to speak to Samsung over the next few days. I'm going to wait a little while for my JIG to arrive and try to remove the binary count, then I'll give them a call. I don't see how they can refuse to replace it really —*it is their software that caused this (I think).
Keeping my fingers crossed.
Thanks for all the advice, guys.
Click to expand...
Click to collapse
JIG is probably the best thing to do. Clear the counter, get rid of triangle and send it in. As you said - it's Samsung's kernel that causes this, and they know it.
Good luck mate.
Okay, here's a surprise: Because I can still enter download and recovery mode, I decided I would try to reset the binary counter before my JIG gets here. So I downloaded the kernel from another thread, and it worked perfect. I then tried to flash the stock ICS ROM so that there was no evidence of another one, and this time it didn't get stuck on "factoryfm" in Odin.
So I now have a working Galaxy Note. I have no idea how that happened (maybe the PIT I flashed earlier kicked in), but it's working.
Now the question is, do I attempt to install CyanogenMod again, or should I just stick to a working Galaxy Note and be happy?
Stay with what you have.
Sent from my GT-N7000 using xda app-developers app
kill.i.an said:
Okay, here's a surprise: Because I can still enter download and recovery mode, I decided I would try to reset the binary counter before my JIG gets here. So I downloaded the kernel from another thread, and it worked perfect. I then tried to flash the stock ICS ROM so that there was no evidence of another one, and this time it didn't get stuck on "factoryfm" in Odin.
So I now have a working Galaxy Note. I have no idea how that happened (maybe the PIT I flashed earlier kicked in), but it's working.
Now the question is, do I attempt to install CyanogenMod again, or should I just stick to a working Galaxy Note and be happy?
Click to expand...
Click to collapse
How much capacity do you have on your internal storage? If it is less than 11GB you may have a damaged chip and just managed to unbrick it.
I think if you can flash GB with Odin you should be fine, and once you get to GB everything is (relatively) safe.
I had a similar problem when I was trying to flash GB from stock ICS using odin, it stuck at FactoryFS and I thought I had superbricked it, but it turns out I was using a dodgy USB cable and using a good USB cable I managed to flash GB again and recover it, and now I am using CM9 - Never going back to stock ICS after this.