Related
I currently work for make cm10.1 to golfu! I use the kernel of cute_prince, but I'll probably be making any changes if necessary...
if someone want to help to advance the project, I leave the link to download the rom!
I try to work as much as possible about the project but I do not have much time: s This is his if you want help, do not hesitate! Your aid goes help this is certain I put the file of the device on my github and file for the kernel are on the github of cute_prince for the moment but it is available since mine: P
Finally, I will publish here all link to the builds!
Build 1 (test only!) (2013-05-24)
Github
Device Github
Kernel Github Credit to cute_prince
the boot stop at htc picture, soo i upload the fix tomorrow just raplace this file in lib folder libandroid_runtime.so libandroid_servers.so libmedia_jni.so with the cm10 file
GL
Good Luck mate ....
for811 said:
the boot stop at htc picture, soo i upload the fix tomorrow just raplace this file in lib folder libandroid_runtime.so libandroid_servers.so libmedia_jni.so with the cm10 file
Click to expand...
Click to collapse
Wont work mate, i have tried many 4.2.2 roms, it will not wok, the set_perms are different and you'll get an error installing, if you use stock cm10 perms you get bootloop, when you carry the libs over it will stay at HTC splash screen, you need to wait for it to be built from source, sorry /:
Can you released to me your port? I can help you.
Jelly Android said:
Can you released to me your port? I can help you.
Click to expand...
Click to collapse
Listen to me oh my god, I have tried many ports and the lib swap will not help at all!!!! Trust Me! I've tried, needs to ported cleanly by source, or built by source, the porting method WILL NOT WORK! At least not for me and I've tried 15 different ROMs and devices! Trust me, need to be source built!
penguin449 said:
Listen to me oh my god, I have tried many ports and the lib swap will not help at all!!!! Trust Me! I've tried, needs to ported cleanly by source, or built by source, the porting method WILL NOT WORK! At least not for me and I've tried 15 different ROMs and devices! Trust me, need to be source built!
Click to expand...
Click to collapse
You are absolutely right!! You cannot port roms of different android versions................Only Method is to compile from source.....
okay, the port dont work, therefore need to compile from source, but I'm new to android developing under ... So I still have a lot to learn, such as how port device from source, soo for this part someone will do in my place anyway :/ I'll have to experiment to port cm10.1 on Golfu and perhaps lead to something
for811 said:
okay, the port dont work, therefore need to compile from source, but I'm new to android developing under ... So I still have a lot to learn, such as how port device from source, soo for this part someone will do in my place anyway :/ I'll have to experiment to port cm10.1 on Golfu and perhaps lead to something
Click to expand...
Click to collapse
Dude, YOU CANNOT PORT 4.2.2 WHEN WE ONLY HAVE A 4.1.2 BASE!
penguin449 said:
Dude, YOU CANNOT PORT 4.2.2 WHEN WE ONLY HAVE A 4.1.2 BASE!
Click to expand...
Click to collapse
when the first 4.1.2 build is create, is dont have a 4.1.2 base?
for811 said:
when the first 4.1.2 build is create, is dont have a 4.1.2 base?
Click to expand...
Click to collapse
When CM10.1 is released we will have a 4.2.2 base to use
penguin449 said:
When CM10.1 is released we will have a 4.2.2 base to use
Click to expand...
Click to collapse
Yess, but i will build cm10.1 from source, not port with another 4.2.2 base
for811 said:
Yess, but i will build cm10.1 from source, not port with another 4.2.2 base
Click to expand...
Click to collapse
Go for it mate, i'm here to test
i will try to make the device tree on my github this weekend! when to be made I will get you the link to my github: P
To 4.2.2? thank you
saider said:
To 4.2.2? thank you
Click to expand...
Click to collapse
yess!
Man I'd rather have a cm9 with working Wi-Fi than an incomplete cm10.1... I still goes for the .ko file thingy to be released, compiled or ported
0118 999 881 999 119 7253
Okey
I have some problem with my ubuntu computer so I was not able to advance this weekend but as soon as I resolve my problems im starting!
Fist build development!!
I'll probably be able to make a first build by the end of the week or early next week!!
Hey guys,
I know the dev scene is pretty bleak here. I already had the android 4.3 jellybean source code synced on my laptop, since I was creating builds for my Nexus.
I tried for the SP, but then I realized that there is no device tree present. I found one by Krabappel but it was incomplete (or atleast I think so). It refers to 2 other extract-files.sh, but for the life of me I can't figure out which ones.
I know there are a few devs here, so can one of them help me out here? How to I get the blobs for the phone?
If I get that going, we can start with an AOSP build and then keep adding stuff to it.
Let me know. \
Cheers! :good:
sarkar1990 said:
Hey guys,
I know the dev scene is pretty bleak here. I already had the android 4.3 jellybean source code synced on my laptop, since I was creating builds for my Nexus.
I tried for the SP, but then I realized that there is no device tree present. I found one by Krabappel but it was incomplete (or atleast I think so). It refers to 2 other extract-files.sh, but for the life of me I can't figure out which ones.
I know there are a few devs here, so can one of them help me out here? How to I get the blobs for the phone?
If I get that going, we can start with an AOSP build and then keep adding stuff to it.
Let me know. \
Cheers! :good:
Click to expand...
Click to collapse
I tried building cm10.1 for the sp, but could not get past the kernel logo. Even the recovery didn't work.
If you want the blobs, I can upload them somewhere. I had extracted them from the current 4.1.2 implementation on the device.
the extract-files.sh are in the below repo
"repository": "android_device_sony_common",
"target_path": "device/sony/common"
I have tried to build the recoveryimage but I am getting problem in builting kernel.elf as normally it is in kernel.img
I have tried to both method building kernel and using zImage.
nil1511 said:
the extract-files.sh are in the below repo
"repository": "android_device_sony_common",
"target_path": "device/sony/common"
I have tried to build the recoveryimage but I am getting problem in builting kernel.elf as normally it is in kernel.img
I have tried to both method building kernel and using zImage.
Click to expand...
Click to collapse
Did you try to convert the zimage to elf using the build tools?
Here's the link that you may try http://forum.xda-developers.com/showpost.php?p=43356450&postcount=2
eeehaw said:
I tried building cm10.1 for the sp, but could not get past the kernel logo. Even the recovery didn't work.
If you want the blobs, I can upload them somewhere. I had extracted them from the current 4.1.2 implementation on the device.
Click to expand...
Click to collapse
Awesome. You can either upload them link me the git if its there
sarkar1990 said:
Did you try to convert the zimage to elf using the build tools?
Here's the link that you may try http://forum.xda-developers.com/showpost.php?p=43356450&postcount=2
Click to expand...
Click to collapse
I mean that i tried to make write device files from scratch
as given here
[link]http://wiki.cyanogenmod.org/w/Doc:_porting_intro[/link]
as on method 3 i tried using zImage as kernel as stated there.
but make recoveryimage fails
nil1511 said:
I mean that i tried to make write device files from scratch
as given here
[link]http://wiki.cyanogenmod.org/w/Doc:_porting_intro[/link]
as on method 3 i tried using zImage as kernel as stated there.
but make recoveryimage fails
Click to expand...
Click to collapse
If you want to learn. It would be best to clone the Doomlord git and then read the files and scripts that are present there. This will give you the knowledge you may need to proceed further.
the git for our processor msm8960t is already present on github. Also download the kernel sources and drivers provided by Sony themselves from their developerworld page
sarkar1990 said:
the git for our processor msm8960t is already present on github.
Click to expand...
Click to collapse
You mean the kernel sources or the cm / aosp sources ? Can you provide a link.
eeehaw said:
You mean the kernel sources or the cm / aosp sources ? Can you provide a link.
Click to expand...
Click to collapse
Here is the link
https://github.com/DooMLoRD/android_kernel_sony_msm8960t.git
eeehaw said:
I tried building cm10.1 for the sp, but could not get past the kernel logo. Even the recovery didn't work.
If you want the blobs, I can upload them somewhere. I had extracted them from the current 4.1.2 implementation on the device.
Click to expand...
Click to collapse
I am using the device tree: https://github.com/Krabappel2548/android_device_sony_huashan
I added CPU_TARGET_VARIANT according to JB 4.3 requirements. And loaded up the required gits.
But the thing is now I get an error:
Code:
Code:
make: *** No rule to make target `device/sony/huashan/zImage', needed by `out/target/product/huashan/kernel'. Stop.
Could you help me out a bit?
I recall CM10.1 needing a kernel build from scratch, along with building the ROM
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
sarkar1990 said:
I am using the device tree: https://github.com/Krabappel2548/android_device_sony_huashan
I added CPU_TARGET_VARIANT according to JB 4.3 requirements. And loaded up the required gits.
But the thing is now I get an error:
Code:
Code:
make: *** No rule to make target `device/sony/huashan/zImage', needed by `out/target/product/huashan/kernel'. Stop.
Could you help me out a bit?
Click to expand...
Click to collapse
I did not use krabappel's device files. I had based my stuff on the Xperia T. I'll try this probably tonight.
eeehaw said:
I did not use krabappel's device files. I had based my stuff on the Xperia T. I'll try this probably tonight.
Click to expand...
Click to collapse
Can you push your device file on github
nil1511 said:
Can you push your device file on github
Click to expand...
Click to collapse
I'm behind a very nasty proxy which makes it super hard to push/pull files from github. Instead of pulling i just download the zip archives.
I'll check out ways to push files though.
eeehaw said:
I'm behind a very nasty proxy which makes it super hard to push/pull files from github. Instead of pulling i just download the zip archives.
I'll check out ways to push files though.
Click to expand...
Click to collapse
Man, I keep running into the error! Ahh.. I think we need a better device tree.
sarkar1990 said:
Man, I keep running into the error! Ahh.. I think we need a better device tree.
Click to expand...
Click to collapse
Try getting the yuga tree, and change yuga to huashan, and fusion3 to viskan wherever possible.
This should not be straightforward. You will have to make some tweaks also.
That *might* work.
CallMeVentus said:
I recall CM10.1 needing a kernel build from scratch, along with building the ROM
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Click to expand...
Click to collapse
You mean coping the kernel sources files to kernel/sony/huashan right ? I did the same thing.
eeehaw said:
Try getting the yuga tree, and change yuga to huashan, and fusion3 to viskan wherever possible.
This should not be straightforward. You will have to make some tweaks also.
That *might* work.
You mean coping the kernel sources files to kernel/sony/huashan right ? I did the same thing.
Click to expand...
Click to collapse
Hmm....and did you define the kernel building path in the boardconfig.mk?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
CallMeVentus said:
Hmm....and did you define the kernel building path in the boardconfig.mk?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Click to expand...
Click to collapse
yes. The kernel was getting built. I was able to see a boot logo on the screen. FreeXperia/Sony logo in this case. And then it would hang. Once I got a bootloop. I was messing around with the ramdisk to see if any hacks get it working.
eeehaw said:
yes. The kernel was getting built. I was able to see a boot logo on the screen. FreeXperia/Sony logo in this case. And then it would hang. Once I got a bootloop. I was messing around with the ramdisk to see if any hacks get it working.
Click to expand...
Click to collapse
Did you implement the changes needed for a CM kernel from its stock sources? I'm not sure of the changes, though. Each kernel differs.
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
CallMeVentus said:
Did you implement the changes needed for a CM kernel from its stock sources? I'm not sure of the changes, though. Each kernel differs.
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Click to expand...
Click to collapse
No. I knew there were changes but I never knew what they were ? I asked a few people in a few threads but was not able to decipher.
Do you have any idea what sort of changes are required. ?
Hello XDA,
As all of you may know there is a 4G LTE version of the Moto G 2nd Generation, better known under the model number XT1072 and XT1079. Unfortunately almost all ROMs are created for the titan. While the titan ROMs boot just fine because of the almost exact HW, when installing those ROMS we don't get 4G and the speakers and earpeace, especially while calling, get unusable.
So instead of sitting on my butt and asking LUK to develop a 4G patch, can anyone guide me ? I know how to setup the SDK and know the theory about compiling from source but have never done it. Do we have to recompile something or can I just replace certain files with some other files from the (one and only) CM12.1 port for the THEA ?
This must be doable I think.
soulaiman said:
Hello XDA,
As all of you may know there is a 4G LTE version of the Moto G 2nd Generation, better known under the model number XT1072 and XT1079. Unfortunately almost all ROMs are created for the titan. While the titan ROMs boot just fine because of the almost exact HW, when installing those ROMS we don't get 4G and the speakers and earpeace, especially while calling, get unusable.
So instead of sitting on my butt and asking LUK to develop a 4G patch, can anyone guide me ? I know how to setup the SDK and know the theory about compiling from source but have never done it. Do we have to recompile something or can I just replace certain files with some other files from the (one and only) CM12.1 port for the THEA ?
This must be doable I think.
Click to expand...
Click to collapse
It's easy but I'm not going to help in dirty ports. Build roms from source instead, this is my recommendation.
If you want to learn how to build roms from source I can help you but you'll need to have Linux machine to do that.
LuK1337 said:
It's easy but I'm not going to help in dirty ports. Build roms from source instead, this is my recommendation.
If you want to learn how to build roms from source I can help you but you'll need to have Linux machine to do that.
Click to expand...
Click to collapse
Thanks for the reply Luk, I also think that building from source is the same. I have followed many, many guides but somehow the part where I have to point to the thea specific HW blobs fails. The extract-files.sh points to ./../../$VENDOR/msm8226-common/setup-makefiles.sh [email protected] wich I understand is the motorola folder in the WORKING_DIRECTORY. Somehow I can't find the right repo on github to point it at.
Sorry for the noobish Q... There is a first time for everything.
EDIT: I wanted to say that I think that porting from source is better, not the same.
soulaiman said:
Thanks for the reply Luk, I also think that building from source is the same. I have followed many, many guides but somehow the part where I have to point to the thea specific HW blobs fails. The extract-files.sh points to ./../../$VENDOR/msm8226-common/setup-makefiles.sh [email protected] wich I understand is the motorola folder in the WORKING_DIRECTORY. Somehow I can't find the right repo on github to point it at.
Sorry for the noobish Q... There is a first time for everything.
EDIT: I wanted to say that I think that porting from source is better, not the same.
Click to expand...
Click to collapse
You could use blobs from TheMuppets instead: https://github.com/TheMuppets/proprietary_vendor_motorola
LuK1337 said:
You could use blobs from TheMuppets instead: https://github.com/TheMuppets/proprietary_vendor_motorola
Click to expand...
Click to collapse
Thanks !!
I was really confused and got the CM12 branch instead the first time. Lol now I feel like a noob haha (wich I am when it comes to developing).
Will post here if I have any Questions/errors (that google can't help me with).
:good:
soulaiman said:
Thanks !!
I was really confused and got the CM12 branch instead the first time. Lol now I feel like a noob haha (wich I am when it comes to developing).
Will post here if I have any Questions/errors (that google can't help me with).
:good:
Click to expand...
Click to collapse
Also don't use git clone manually, make your local_manifests xml instead.
LuK1337 said:
Also don't use git clone manually, make your local_manifests xml instead.
Click to expand...
Click to collapse
Oh okay, I will look into that in a minute.
Now I got an issue that really got my head hurting... When I do the lunch command, my Moto G isn't in the list of devices... What Am I doing wrong ?
I have got a directory called thea in WORKING_DIRECTORY/device/moto/thea
I have got also an old thea directory (cm12.1) in WORKING_DIRECTORY/thea and WORKING_DIRECTORY/thea2
All the blobs from TheMuppits repo are in de device/moto/thea dir
All the poperiatary blobs are also in the XT907 dir...
I've done the
Code:
cd /device/moto/thea
init android-5.1.1_rx
repo sync
and let it finish without errors.
Once I get over this I will be good to go.
Oh, and thanks for sharing the knowledge !
soulaiman said:
Oh okay, I will look into that in a minute.
Now I got an issue that really got my head hurting... When I do the lunch command, my Moto G isn't in the list of devices... What Am I doing wrong ?
I have got a directory called thea in WORKING_DIRECTORY/device/moto/thea
I have got also an old thea directory (cm12.1) in WORKING_DIRECTORY/thea and WORKING_DIRECTORY/thea2
All the blobs from TheMuppits repo are in de device/moto/thea dir
All the poperiatary blobs are also in the XT907 dir...
I've done the
Code:
cd /device/moto/thea
init android-5.1.1_rx
repo sync
and let it finish without errors.
Once I get over this I will be good to go.
Oh, and thanks for sharing the knowledge !
Click to expand...
Click to collapse
Your directories are bit off, it should be looking like this.
CM/device/motorola/msm8226-common
CM/device/motorola/thea
CM/device/qcom/sepolicy
CM/device/qcom/common
CM/kernel/mototola/msm8226
CM/vendor/motorola
Don't forget about rest of CM source :3
LuK1337 said:
Your directories are bit off, it should be looking like this.
CM/device/motorola/msm8226-common
CM/device/motorola/thea
CM/device/qcom/sepolicy
CM/device/qcom/common
CM/kernel/mototola/msm8226
CM/vendor/motorola
Don't forget about rest of CM source :3
Click to expand...
Click to collapse
Oh okay got ya. Do I have to do some kind of refresh command when I touch the folders ?
soulaiman said:
Oh okay got ya. Do I have to do some kind of refresh command when I touch the folders ?
Click to expand...
Click to collapse
If you're building CM then all you have to do is to get vendor, do envsetup.sh and just brunch thea.
LuK1337 said:
If you're building CM then all you have to do is to get vendor, do envsetup.sh and just brunch thea.
Click to expand...
Click to collapse
I'm trying to build an AOSP build like yours to learn. I'm following this guide:
http://forum.xda-developers.com/chef-central/android/tutorial-compile-lollipop-ubuntu-t2929410
I guess it is similar in steps as what you described ?
Even with all the files in the correct directories when I exec the lunch command it doesn't list the moto G. See screenshot.
soulaiman said:
I'm trying to build an AOSP build like yours to learn. I'm following this guide:
http://forum.xda-developers.com/chef-central/android/tutorial-compile-lollipop-ubuntu-t2929410
I guess it is similar in steps as what you described ?
Even with all the files in the correct directories when I exec the lunch command it doesn't list the moto G. See screenshot.
Click to expand...
Click to collapse
You won't get clean AOSP to build, also u messed up directories as you put vendor in device.
If you have hangouts you can add me ( https://plus.google.com/108108436166506337243 ) so I could help you live.
LuK1337 said:
You won't get clean AOSP to build, also u messed up directories as you put vendor in device.
If you have hangouts you can add me ( https://plus.google.com/108108436166506337243 ) so I could help you live.
Click to expand...
Click to collapse
Thanks for all the help man, really appreciate it !
Yeah stupid fault of my part. Will try it.
About Hangouts: My hangouts app allways FC's on me so that will be for another day. I'll add you asap ! Thanks!
Also it is 1:45AM here so
soulaiman said:
Thanks for all the help man, really appreciate it !
Yeah stupid fault of my part. Will try it.
About Hangouts: My hangouts app allways FC's on me so that will be for another day. I'll add you asap ! Thanks!
Also it is 1:45AM here so [emoji14]
Click to expand...
Click to collapse
K, I'm in the same time zone fyi.
Before this is flagged as duplicate thread. Or a simple link to the source code of raymanfx source code. Or even the s6 edge plus port.
If I compile just using source code. It doesn't boot, I've tried all I have that I'm limited at.. some driver error Possibly narrowed it down to it being the defconfig.
Need the missing elf file and a working defconfig. (I am trying to fix some bugs until a more suited release is made..
Thank you
@RaymanFX @Ducter
And anyone else with knowledge
LiL_Assassin said:
Before this is flagged as duplicate thread. Or a simple link to the source code of raymanfx source code. Or even the s6 edge plus port.
If I compile just using source code. It doesn't boot, I've tried all I have that I'm limited at.. some driver error Possibly narrowed it down to it being the defconfig.
Need the missing elf file and a working defconfig. (I am trying to fix some bugs until a more suited release is made..
Thank you
@RaymanFX @Ducter
And anyone else with knowledge
Click to expand...
Click to collapse
Have you tried removing the 'OMX' folders from the system lib / lib64 folder? After you compiled the build.
Battlehero said:
Have you tried removing the 'OMX' folders from the system lib / lib64 folder? After you compiled the build.
Click to expand...
Click to collapse
Sorry man my apologies. I am trying the kernel side of things not the actual rom
LiL_Assassin said:
Sorry man my apologies. I am trying the kernel side of things not the actual rom
Click to expand...
Click to collapse
What device variant do you have?
Battlehero said:
What device variant do you have?
Click to expand...
Click to collapse
My friend has c and I have I
LiL_Assassin said:
My friend has c and I have I
Click to expand...
Click to collapse
Upload the build and I'll have a gander.
Battlehero said:
Upload the build and I'll have a gander.
Click to expand...
Click to collapse
I sent you a pm.
Battlehero said:
Upload the build and I'll have a gander.
Click to expand...
Click to collapse
Though if the pm or this doesn't suit you. Here's an upload for you man. We could be doing things wrong.. But we would love the insight. (We think this is the furthest we have managed)
https://www.dropbox.com/sh/oaenmo464fxoycz/AAD1uk-18MaNp0fQVyyjTvPAa?dl=0
Since OnePlus 8 got LineageOS, I figure it's time for us to do the same. But first we should do some kernel compilation.
I've compiled the kernel successfully but it is NOT booting, this is for people who know more than me for these newer chipset which they can get the kernel message.
Here's the official kernel source i forked: https://github.com/TipzTeam/android_kernel_xiaomi_sm8250
Here's a link to the compiles of the kernel:
https://androidfilehost.com/?w=files&flid=314140
Good luck!
who has tried ?? what are the differences from official kernel??
aleksgiab said:
who has tried ?? what are the differences from official kernel??
Click to expand...
Click to collapse
I tried, here's what I found:
1. Doesn't boot
Here's the differences:
1. Booting
2. Dts
3. Drivers?
it's still in the early stages so i won't experiment because i'll take it brick I'll wait to try other users to have a good time too
aleksgiab said:
it's still in the early stages so i won't experiment because i'll take it brick I'll wait to try other users to have a good time too
Click to expand...
Click to collapse
I tried on my own and doesn't boot but I don't know how to get kmsg
TipzTeam said:
I tried on my own and doesn't boot but I don't know how to get kmsg
Click to expand...
Click to collapse
then don't experiment ... so as not to spoil it
aleksgiab said:
then don't experiment ... so as not to spoil it
Click to expand...
Click to collapse
You don't understand. I am trying to get people who know more than me with these new chipsets which they can pull boot logs.
What VM or software are you using to compile kernel?
Link?
badaas said:
What VM or software are you using to compile kernel?
Link?
Click to expand...
Click to collapse
I use Ubuntu 18.04 on a real computer.
is it possible to make a gsi without compiling the kernel?
404
TipzTeam said:
I use Ubuntu 18.04 on a real computer.
Click to expand...
Click to collapse
I've just compiled the kernel for the LMI (POCO F2 Pro) and it's 13.3mb image.gz-dtb file.
I have the same issue it doesn't boot, complied without errors.
I first did the compressed image, it's 13.3mb, next I did the uncompressed image and it's 37mb