How do I erase all of setCPU's settings and files :( - LG Optimus 4X HD

Hi I've been using SetCPU for a while now and today the app is going crazy . I set the frequencies to 1500MHz max and 1000MHz min. When I lock and unlock the phone it becomes the opposite like 1000MHz max and 1500MHz min. And the frequency is at 860MHz.
I don't know how that's possible. And I did a factory reset today and I check the CPU frequecy with CPU spy and it was 1000mhz.
So I have 2 questions.
Does a 1.5GHz phone always stay at 1500MHz?
And
How do I wipe all of the setcpu settings and files in recovery and bring my phone into default CPU state?
Sent from my LG-P880 using xda app-developers app

theofficialpimp said:
How do I wipe all of the setcpu settings and files in recovery and bring my phone into default CPU state?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Turn off the phone, press the "down volume" key and at the same time turn on the phone (it will take a while until turn on).
You should have now the "Android system recovery". with the volume key select "wipe data/factory reset", hit the I/O key to start.
After that select "reboot system now" to restart the phone.
I think it will do it.

Fairly simple. Go to Settings, Apps and select SetCpu. Stop and clear data.
Open SetCpu again and you ll start fresh.
However if SetCpu is jumping frequencies like that then problem may not be with the app but with some rouge app running in the background all the time (or of you use performance or user space in SetCpu). Check what app is running most of the time with Better Battery Stats app and uninstall that app if possible. In my case it was Chrome browser forcing cpu to run at 1.5 all the time. Good luck.
Sent from my Transformer Prime TF201 using XDA Premium HD app

Thanks guys I did what to told me and hopefully it's fixed , but does a 1.5 GHz phone always run on 1.5GHz without no CPU settings app?
Made possible by my sexy LG Optimus 4X HD(aka P880)

Unfortunately this one does. For some reason without SetCpu app my phone runs at high cpu causing it really hot. LG probably want to show off on performance. I started using SetCpu with on demand at 51-1200 and screen off and in call profiles. Battery for a lot better and cpu started running at normal cycles.
Sent from my LG-P880 using xda app-developers app

I already delete the app data and cache and wiped all cache data and even factory reset my phone but it runs on 51MHz to 1500MHz . I used CPU spy to check. Please help me. I want my phone to be like how it was from factory.
Made possible by my sexy LG Optimus 4X HD(aka P880)

Related

[Q] Galaxy note at 200MHZ

Hello, today i was browsing the net and then my GNote suddendly became slow...
i had rooted it with superOneClick, and i hadn't had any problem till now. I installed SetCPU and i saw it is running at 200/500mhz. How can i solve this problem? I tried to reboot many times and i pulled out the battery, but nothing changed.
I previously had installed cpu tuner, but also uninstalled it without problems and when the slow down started, i hadn't any overclock app on my phone. Thanks!
You have to scale it up to 1400MHz again using SetCPU. Since you don't have a clue on using it, i recommend that you uninstall it after you've clocked it to its normal state.
maybe it was low on power and it started using system power saving
It is charging (65%) although the battery level decreases...
And i used scale it up to 1400mhz, but nothing changes, only for a few seconds it runs normally and than back to be laggy
It seems that something is fighting against setcpu, any clues? I think that with a hard reset i will solve the problem, but this is my last willing.
And I installed setcpu after the lag started, i wanted to see the clock of the cpu because it was too slow.
Don't use SetCPU or any OC tools to check the CPU. Install Elixir 2 from the Market and see if it goes up to 1400MHz when you stress the phone.
Sent from my GT-N7000 using xda premium

[Q] LG 4X HD a little warm after using LG GearBox

Hello guys I was seeing an app to reduce core temp but after I set normal core quanity and frecuency and unsinstalled app the phone feels a bit more warm than normal, what could I do?
PontiacGTX said:
Hello guys I was seeing an app to reduce core temp but after I set normal core quanity and frecuency and unsinstalled app the phone feels a bit more warm than normal, what could I do?
Click to expand...
Click to collapse
hey, i see that you are from Caracas, Me too, well, first that all, make sure that your phone CPU runs normally, use some CPU info program to see if your cpu works normally, as speed, and shutting down when not need it, maybe that programs set some system parameter changed and yor cpu is always running at max speed or all cores are active even when not using it.
you can also clean your dalvik cache, and use a cleaner program

Reboots after governor changed

So I've been running XenonHD for about a day now and have started messing around with overclocking and underclocking. I have been using tasker to set the cpu max and min per app that way I could save battery and also be overclocked while playing games and very underclocked while on social apps. this has been working great overall but, after testing underclocked at between 96mHz and 1134mHz using the hotplug governor and it being fine for several hours i decided to have it set on boot and discovered that it reboots every time just after syncing the SIM card and regaining signal. I'm wondering weather anyone can explain this to me as it runs perfectly fine as long as i don't set it on boot?
Sent from my Atrix HD using xda app-developers app
Hogman500 said:
So I've been running XenonHD for about a day now and have started messing around with overclocking and underclocking. I have been using tasker to set the cpu max and min per app that way I could save battery and also be overclocked while playing games and very underclocked while on social apps. this has been working great overall but, after testing underclocked at between 96mHz and 1134mHz using the hotplug governor and it being fine for several hours i decided to have it set on boot and discovered that it reboots every time just after syncing the SIM card and regaining signal. I'm wondering weather anyone can explain this to me as it runs perfectly fine as long as i don't set it on boot?
Sent from my Atrix HD using xda app-developers app
Click to expand...
Click to collapse
PAC was doing that for me, but it was because my voltage settings were too low. It could be something simple like your phone needs the full power and the set on boot takes that away.
I don't know what app you're using, but try a different one. Could just be whatever app your using doesn't like the phone/rom combo.
Our phone also responds best to interactive and interactive based governors.
Tasker only changes the clock when a game is opened or when a social app is opened, the only setting effecting it on boot is the performance tab in settings I have it at the same frequency with the interactive governor also set on boot and it reboots fine now. Could the hotswap governor make it need more power than interactive and cause it to reboot?
Sent from my Atrix HD using xda app-developers app

[Q] Havy Battery Drain on [ROM][4.4.2] CyanogenMod 11.0 20140315 [DAILY] [FULLY WORKI

HI I am having heavy battery drain
running version from 15/03/2014
I had a maybe 3 minute phone call but still the phone app has eaten up 37% followed by 31% android system
total 72% left after 1h36min
This is a new behavior, up to last week it all worked smooth.
the CPU governor in nofrills CPU is now set to performance since on demand or power saving make the phone very sluggish
Also Video app is not working, just crashes same result in Focal
Any ideas or tips?
Thanks Merlin
You do realize the performance CPU governor makes the CPU constantly run at 1 GHz? This will of course drain your battery.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
merlin2380 said:
HI I am having heavy battery drain
running version from 15/03/2014
I had a maybe 3 minute phone call but still the phone app has eaten up 37% followed by 31% android system
total 72% left after 1h36min
This is a new behavior, up to last week it all worked smooth.
the CPU governor in nofrills CPU is now set to performance since on demand or power saving make the phone very sluggish
Also Video app is not working, just crashes same result in Focal
Any ideas or tips?
Thanks Merlin
Click to expand...
Click to collapse
It's maybe the 1GHz bug. The 1 GHz bug cause the heavy battery drain. Try this, turn off wifi and reboot.
its 1ghz bug if you are using ondemand. but i hope you know performance governor keeps cpu freq. at 1000mhz.
im using abbysplug/sio governor. and my battery lasts for 18 hours.(wifi or mobile data on. sms Messaging. whatsapp. facebook games rarely)
Sent from my GT-I8190
factorexh said:
its 1ghz bug if you are using ondemand. but i hope you know performance governor keeps cpu freq. at 1000mhz.
im using abbysplug/sio governor. and my battery lasts for 18 hours.(wifi or mobile data on. sms Messaging. whatsapp. facebook games rarely)
Sent from my GT-I8190
Click to expand...
Click to collapse
Can you tell me pls , what is abbysplug and how can i install it?
demonijum said:
Can you tell me pls , what is abbysplug and how can i install it?
Click to expand...
Click to collapse
abbyssplug change the processor performance. You can find it in Settings > performance > processor > CPU governor
go tp settings>about phone and press repeatly to build number. you will see "you are a Developer now" text. go back. performance menu must be appear. you can set it there cpu governor.
Sent from my GT-I8190
factorexh said:
its 1ghz bug if you are using ondemand. but i hope you know performance governor keeps cpu freq. at 1000mhz.
im using abbysplug/sio governor. and my battery lasts for 18 hours.(wifi or mobile data on. sms Messaging. whatsapp. facebook games rarely)
Sent from my GT-I8190
Click to expand...
Click to collapse
A fellow user thankfully redirected me to this thread and told me about this governor setting you mentioned above and i must ask you some questions if you dont mind of course
1- What's the difference between Abbysplug and Powersave governor? I have my phone underclocked at 200 at all times and the sluggish speed never seemed to bother me much, so is there a difference between these 2 governors when it's at 200 all the time?
2- Have uninstalled/frozen/disabled any system or built in apps?
3- You leave the mobile data on for 18 and the battery lasts????
Please give me your exact settings, man; i'm desperate. :crying:

LG P990 battery drain when the overclock to 1.4GHz

LG P990 battery drain when the overclock to 1.4GHz.
I think the kernel I used support overclock to 1.4GHz. But it happens that battery drain so serious that I cannot even charge the phone?
I am using LG android 4.1 rom. Anyone faced similar problem and know how to solve? thanks
Its known that higher OC = higher drain. But the drain shouldnt be so much massive.. Try to check with BBS what OS using your battery..
Sent from my LG-P990 using xda app-developers app
thx for suggestion, I am now using BBS to check battery state.
But the most weird thing is that, if i stick to no overclock, the battery life has no problem.
BBS result: I found that if i overclock, the mobile cannot deep sleep. Or in fact, if I overclock to 1.3GHz, set as interactive mode. The CPU keeps at 1.3GHz for most time.
So that's your problem.
Look here http://forum.xda-developers.com/showthread.php?p=75
Use trickster mod app and set min/high frequencies and on governor control setting choose on over which load your cpu will go on high/max frequencies....
Sent from my LG-P990 using Tapatalk
sokinso said:
So that's your problem.
Look here http://forum.xda-developers.com/showthread.php?p=75
Use trickster mod app and set min/high frequencies and on governor control setting choose on over which load your cpu will go on high/max frequencies....
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
I guess i find the problem.
The media server is draining the battery.
As far as I did not listen to music, it is ok.
But if I use EsExploer or playerpro to play a music for an hour. The BetterBatteryState showed that the CPU freq keeps at 1GHz for an hour.
What can I do to solve the problem? I googled a lot, including "repair" all music on sdcard, etc, many so called solutions did not solve the problem. thanks

Categories

Resources